Used Arthur Klink Internal Broaching Machine for sale (70,459)

Condition: like new (used), functionality: fully functional, Year of construction: 2025, overall weight: 370 kg, power: 3.5 kW (4.76 HP), input voltage: 400 V, input frequency: 50 Hz, broaching length: 800 mm, broaching speed: 3 m/min, total length: 920 mm, total width: 800 mm, total height: 1,950 mm, Manufacturer: Rausch (Haan/ Rhld) Model: RS 3 G/800 Machine No.: 2968/424 Year of manufacture: 1970 Weight: 370kg Overhaul: 8/2025 by Wiemers AG Our Ref. / Machine No.: WAG 787 General / Technical Data: Unused, overhauled mechanical vertical broaching machine by Rausch Pulling force: 3,000kg (30kN) Broaching speeds: 3m/min and 6m/min Return speed: 3m/min Maximum stroke: 800mm Maximum tool length: 1,000mm Table size / working surface: 340mm x 220mm / 430mm x 310mm Table opening: Ø 90mm for standard broaching mandrels Workpiece diameter: unlimited (without spray guard cabin) Dimensions (h x w x d): 1,950mm x 820mm x 900mm (h = table height from floor without attachments) Motor: 3.5kW Power supply: 400 Volt / 50 Hz Accessories / Special Features: - Modified drive system with geared motor and toothed belt drive - 2 broaching speeds: 3m/min & 6m/min - External stroke adjustment, cross-machine reproducible tool length adjustment system - Integrated coolant unit with check valve and drain cock, including selector switch for automatic operation (does not automatically switch in swivel mode) - Patented coolant/lubricant swivel system - Three-sided enclosed, front-open spray guard cabin (no external operator panel) - Machine enclosure below the safety door with chip guard and tool storage area - Electrical cabling within steel protective conduits - Electrical jaw monitoring (tool removal control to prevent unintended retraction of the pull bridge) - Safety door with integrated emergency stop function - Control panel made from stainless steel sheet with permanent marking - 4 central lubrication points for the trapezoidal spindle drive - Machine documentation Remarks: The machine is fully overhauled, with the frame completely refurbished. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast wear-resistant bronze - All bearings and seals replaced Bljdjytvyxepfx Amzok - Central drive shaft is new - Coolant system (pump, check valve and drain cock), including coolant/lubricant swivel system, is new - Jaws are new (pull bridge additionally reinforced) - A switchable jaw monitoring system has been installed (additional safety for operators and to prevent tool breakage) - A safety door with interlock has been installed instead of the rubber reach-in protection - Tool length adjustment system relocated outside the machine compartment - Additional limit switches installed - Complete electrical system (control cabinet) with Siemens components is new - Control panel made of stainless steel with durable labeling - New geared drive motor (SEW) with toothed belt drive - Machine has been repainted with 2-component structural paint The machine is stored at our warehouse and can be inspected under power.

Condition: used, Year of construction: 1958, honing diameter 40-420 mm stroke 15-6500 mm Bsdpfoyqvgyjx Amzslk centre height 520 mm workpiece length 6500 mm workpiece dia. 1000 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: good (used), Year of construction: 1980, machine/vehicle number: 20007, Offer 23326 Bodpfxoyfgc Ij Amzolk Technical specifications: - Broaching tool width up to 10 mm - Broaching tool length up to 1000 mm - Pulling force: 1.5 t - Working speed: 4 m/min - Working / operating height: 1000 mm - Drive: 400 V / 1.5 kW - Required space: approx. W 1500 x H 1000 x D 400 mm - Weight: approx. 200 kg

Year of construction: 2014, condition: good (used), machine/vehicle number: 2014-1313, Offer 22651 Technical specifications: - Mobile version with motorized forward/reverse movement + steering - Motorized oscillating stroke, forward/reverse, with speed control - Oscillating stroke, longitudinal, forward and backward Bledji Apb Nopfx Amzsk - Motorized contact pressure - oscillating pressure adjustment - Grinding belt dimensions approx. 2000 x 50 mm - Contact disc B 60 / D 300 mm - Pneumatic connection 6 bar - Drive 400 V / 2880 rpm / 7 kW - Space requirement approx. W 5700 x H 1200 x D 1400 mm - Weight approx. 800 kg

Condition: used, honing diameter 99999 mm stroke 99999 mm Bljdpov Twgiefx Amzok throat 99999 mm Used panel of a NAGEL MSU2 No warranty

Condition: used, Year of construction: 1952, 220 mm ja weight of the machine ca. 1,4 t Bedpfx Aeyn R Nwomzelk

Condition: new, Hydraulic tapping machine Easy Tap ETH 24 Thread diameter up to M 24 Speed 0 - 600 rpm Thread M 5 - M 24 Working range 2050 Rmax. Working height 920 mm Table surface 900 x 700 mm Oil capacity 100 l Motor power 3.0 kW Weight: 220 kg Equipment: Hydraulic tapping machine Incl. machine base with clamping disk Mobile Hydr. pressure gauge Infinitely variable speed adjustment from 0 - 600 rpm Vertical / horizontal thread cutting possible Bsdetbawkspfx Amzelk Special accessories included / quick-change inserts : M05 / M08 / M10 / M12 / M14 / M16 / M20 / M24

Condition: used, Rotary indexing thread tapping machine, 8-station rotary table. 1 inspection station, 1 vertical and 1 horizontal thread tapping unit. With guide bush 1 mm pitch Chiron, thread tapping unit with guide bush 0.7 mm pitch, M4. One discharge station, coolant system. Blodpeyl Ntpjfx Amzjk

Condition: ready for operation (used), Year of construction: 2004, operating hours: 2,184 h, functionality: fully functional, machine/vehicle number: 2407-463, spindle speed (max.): 60,000 rpm, number of spindles: 3, swivel angle B-axis (min.): -90 °, swivel angle B-axis (max.): 15 °, TECHNICAL DETAILS Grinding spindle speeds Spindle 1: 60,000 rpm Spindle 2: 60,000 rpm Spindle 3: 45,000 rpm Bjdjxtdfbjpfx Amzelk B-axis swivel range: -90°/+15° MACHINE DETAILS Spindle hours Spindle 1: 11,278 h Spindle 2: 2,184 h Spindle 3: 2,841 h Main counter: 45,144 h EQUIPMENT Touch probe (on 4th spindle position)

Condition: used, Year of construction: 1989, centre height 250 mm centre distance 600 mm Dimensions (L/W/H) 3600 x 1900 x 2100 mm weight of the machine ca. 2,25 t Bjdpfx Amexzuzcezjlk

Condition: ready for operation (used), Year of construction: 1998, overall weight: 2,900 kg, power: 8 kW (10.88 HP), input voltage: 380 V, number of broaching positions: 1, total width: 6,100 mm, total height: 1,900 mm, Manufacturer: Karl Klink Model: RW 10 Year of manufacture: 1959 / 1998 Weight: 2,900 kg Machine No.: 1194 General Information / Technical Data: Hydraulic internal broaching machine in operational condition Broaching stroke: 1,420 mm Tensile force: 10,000 kg Diameter of drawhead mount in the draw bridge: 85 mm Broaching tool clamping: universal drawhead for flat shanks up to 25 mm width Through-hole in the clamping table: Ø 100 mm Workpiece diameter: max. approx. 360 mm (limited by the machine body of the tool feeder) Cutting speed: hydraulically infinitely variable from 1 m/min to 7 m/min Return speed: hydraulically infinitely variable from 7 m/min to 25 m/min Machine dimensions (W x D x H): approx. 4,100 (6,100) mm x 800 mm x 1,900 mm (excluding work area) Power supply / connected load: 380 Volt 50 Hz / 8.0 kW Bodpfx Amsxtcz Iozolk Accessories / Special Features: • The machine is equipped with manual-hydraulic control for the broaching stroke movement • The machine has an integrated coolant/lubricant system • The machine features a basic oil drip tray fitted to the machine bed, without tool feeder Remarks: The machine is ideal for the production of keyways and profiles. Broaching needles, arbors, and drawheads can be supplied on request.

Condition: used, Year of construction: 1971, grinding depth: 150 mm, grinding diameter: 80 mm, inner diameter: 80 mm, Manufacturer: OVERBECK Model: 250 I Year of construction: 1971 Workpiece clamping diameter: max. 140 mm Clamping length: max. 150 mm Grindable bore length: 150 mm Bledpfx Asu Ef Dqomzok Bore diameter: max. 80 mm Surface grinding device can be swiveled in by hand Coolant tank with pump without grinding spindle and drive motor was last operated with compressed air spindle Weight: approx. 1400 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 018.0179.90.035, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Bsdpjyh R Uwjfx Amzjlk Price without packaging; Delivery condition: FCA (machine location) ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Year of construction: 1979, condition: ready for operation (used), Components: headstock, main spindle, faceplate flange, taper, table, guideway, longitudinal guide, cross guide, tailstock, workpiece holder, tailstock taper, workpiece spindle. With documentation and records. An on-site inspection is possible. Bledpfxjyln Dtj Amzsk

Condition: used, Internal threading machine, Hagen & Goebel, type HG 124 Machine No. 4112, Year of manufacture approx. 1980 Threading capacity in steel: M3 to M10 Threading capacity in cast iron: M3 to M15 Threading capacity in brass: M3 to M17.5 Overhang: 250 mm Tailstock travel: 80 mm Table size: 345 x 245 mm Spindle speed: 200 - 1000 rpm Motor power: 0.55 / 1.0 kW Power supply: 380 Volts, 50 Hz - 6 speed stages via belt change (3 stages via belt + 2 motor speeds) - Thread pitch via lead screw - 2 lead screws with 0.8 mm and 28 threads per inch - Table height adjustment with rack and pinion via hand crank on the round column - Spindle mount with taper Ø 14.8 to 16 mm - Gear-type drill chuck Ø 1 to 13 mm Space requirement L x W x H: 900 x 500 x 1800 mm Bodehgnd Aspfx Amzjlk Weight: 260 kg Good condition

Year of construction: 1971, condition: ready for operation (used), A Wotan internal roll grinding machine is available. Workpiece diameter: 1200mm, max. outside diameter: 1000mm, max. bore diameter: 900mm, travel X/Z: 370mm/800mm, swiveling: 15°, table travel: 500mm, grinding depth: 250mm, speed: 220rpm. Machine dimensions X/Y/Z: approx. 5000mm/3000mm/2200mm, weight: approx. 8500kg. Documentation vorhanden. An on-site inspection is possible. Bedpfsxyk S Ujx Amzelk

Year of construction: 1955, condition: ready for operation (used), A conventional internal cylindrical grinding machine Fortuna is available. Center distance: 1500mm, center height: 225mm, max. workpiece diameter: 450mm, max. workpiece weight: 300kg, grinding wheel diameter: 450mm, grinding wheel width: 80mm, bore: 203mm, speed: 265rpm, machine dimensions X/Y/Z: approx. 3450mm/1450mm/1550mm, weight: approx. 4000kg. Documentation available. On-site inspection is possible. Blodpjyg Nvtsfx Amzjk

Condition: ready for operation (used), Workpiece diameter with/without steady rest: 400mm/250mm, max. workpiece length: 750mm, spindle head load: 400kg, max. internal grinding diameter: 350mm, max. grinding depth: 500mm, travel X/Z: 300mm/1000mm, max. traverse speed: 15m/min, control system: Siemens Sinumerik. Documentation available. On-site inspection is possible. Bodpox Uq T Dsfx Amzelk

Condition: ready for operation (used), Year of construction: 2012, A vertical internal broaching machine (broaching tower) Karl Klink with lift table and loading portal is available. Broaching force: 63kN, broaching stroke: 1000mm, spindle stroke: 400mm, broaching speed: 7.5m/min, return speed: 24m/min, stations: 1, table width: 500mm. Machine dimensions X/Y/Z: approx. 3700mm/3000mm/3200mm, weight: approx. 3500kg. Documentation available. An on-site inspection is possible. Blsdpexwcvmofx Amzok

Year of construction: 2014, condition: ready for operation (used), Grinding diameter: 6mm-150mm, max. grinding stroke: 125mm, swing diameter over table/with cover: 600mm/260mm, travel X/Z: 500mm/170mm, rapid traverse: 10m/min, feed: 10m/min, resolution X/Z: 0.0001mm, workpiece spindle speed: 850rpm. Machine dimensions X/Y/Z: approx. 2550mm/3100mm/1800mm, weight: approx. 2600kg. Documentation available. An on-site inspection is possible. The machine is located in China. Bljdpfx Amjxf Ikfszsk

Condition: ready for operation (used), Year of construction: 2008, A vertical internal broaching machine Frömag is available. Broaching tools: 3, stroke: 800mm, pulling force: 60kN, connected load: 15kW. Machine dimensions X/Y/Z: approx. 1050mm/900mm/3800mm, control: Frömag Commander PP-10. An on-site inspection is possible. Bljdpfx Aoxph Sdjmzok

Condition: good (used), JUNG D22 - Internal Cylindrical Grinding Machine - Machine suitable for internal grinding / plunge grinding - Smallest grindable bore: 14 mm - Largest grindable bore: 150 mm - Grinding length with face grinding attachment: 250 mm - 6 workpiece spindle speeds: 46-270 rpm - Spindle head swivels right/left: 30 degrees - Distance from spindle axis to table center: 250 mm - Maximum distance between workpiece spindle and grinding support: 935 mm - Worktable / tilting forwards and backwards: 5 degrees each - Manual / automatic operation Bledpeyh Hhgjfx Amzok - Taper grinding attachment - Steady rest - Three-jaw chuck - Spare grinding spindles (see photos) Dimensions: LxWxH: 2.8 x 1.5 x 1.8 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: excellent (used), Hydraulic with semiautomatic cycle Internal grinding diameter 5-200 mm Grinding depth 250 mm Workpiece spindle head center height 180 mm Spindle bore 50 mm Table travel -600 mm Misc. accessories MARCELS MASCHINEN AG Bodsylbhxepfx Amzjlk

Condition: refurbished (used), Year of construction: 2026, functionality: fully functional, center height: 150 mm, total length: 620 mm, Mechanics: All wear parts of the machine are replaced, including the infeed spindle in the X-axis. All assemblies are restored to as-new condition. After the overhaul, the machine is comparable to a new machine. Geometry: The machine is completely dismantled down to the guides. Before the geometry of the individual tables and assemblies can be restored, both guides of the X and Z axes are scraped by hand and restored to as-new condition. After completion, the machine receives a measurement report in accordance with the manufacturer's specifications. Painting: Once the geometry of the machine has been restored, it is prepared for repainting. All housings, tables and the machine bed are stripped of old paint, cleaned and repainted. Blodpourw Uysfx Amzok Hydraulics: The entire lubrication system, including the lubrication unit, is replaced. The hydraulic unit is also completely overhauled. Conventional internal cylindrical grinding machine TSCHUDIN HTG 610I Equipment of the machine: Technical data: Center height: 150 mm Center width: 680 mm Grinding length: 620 mm Weight and space requirement of the machine: 2500kg // 2340x1445x1900 mm Machine equipment (standard): 1 pc. Workpiece headstock MK5 1 pc. Control panel 1 pc. Holder for internal grinding spindle 1 pc. Speed control unit for belt spindle (UJ50 / UJ80) FISCHER 1 pc. Hydraulic unit Optional: - Digital measuring system 2-axis - Freely adjustable speed (1-800 rpm) incl. soft start (higher speeds are optionally possible after clarification of technical details) - Separate low speed for part alignment

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, machine/vehicle number: M 09074, overall weight: 950 kg, power: 8 kW (10.88 HP), input voltage: 400 V, Technical Specifications: Manual Adjustment: 400mm manual adjustment Automatic Broaching Stroke: 250mm, automatic stroke Keyway Widths: 2 to 32mm Bjdpeyazc Sjfx Amzjlk Workpiece Diameter: 620mm Maximum Thrust Force: 20kN fixed value Cutting Speed: 15 m/min, infinitely variable Dimensions (W x D x H): 1000 x 1200 x 2440mm Net Weight: approx. 950kg Electrical Connection: 3 x 400 VAC, 50/60 Hz, 8kW Pneumatic Connection: not required Colour: Blue RAL 5001, Grey RAL 7035 For further details, please see the PDF description in the attachment.