Used Bad Duben Prx 32 E - Cnc for sale (80,101)

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Technical condition: New Ksdsyr T Iqopfx Afdjlr

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Technical condition: New Kledpfx Afeyr T Ikodjr

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Kjdpfxeyr T Ido Afdslr Technical condition: New

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Technical condition: New Klsdpfx Aoyr T H Tsfdsr

Condition: repair required (used), Year of construction: 1990, functionality: not functional, machine/vehicle number: 418.364.077, drilling depth: 800 mm, feed length Z-axis: 1,000 mm, total length: 4,200 mm, total width: 2,100 mm, total height: 2,800 mm, workpiece weight (max.): 500 kg, overall weight: 7,000 kg, travel distance X-axis: 800 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 1,050 mm, spindle speed (max.): 7,000 rpm, drill diameter: 25 mm, type of input current: three-phase, number of spindles: 1, feed length W-axis: 120 mm, TBT - Deep hole drilling machine, single spindle, with CNC cross table, "x/y" axes and "W" positioning slide! Control: EST - Error in CPU rack. Machine is not operational. All actuators/hardware were functional until decommissioning. The rack error occurred during the downtime after decommissioning. Power electronics/inverter: Bosch Clamping table and various accessories Dismantling preferably by the buyer; machine components (control cabinet, body, oil tank) can be placed onto machinery skates using the existing hall crane, but loading inside the hall is not possible! Klsdpsyz Rd Nefx Afder Dismantling and loading upon agreement. Transport exclusively by the buyer.

Condition: used, functionality: fully functional, Year of construction: 2025, operating hours: 50 h, load capacity: 227 kg, lifting height: 9,850 mm, fuel type: electric, mast type: telescopic, construction height: 2,390 mm, empty load weight: 2,037 kg, total length: 2,360 mm, drive type: Elektro, construction width: 810 mm, Scissor lift Mast type: Telescopic Technical condition: very good Battery voltage: 24V Battery capacity: 210Ah Battery manufacturer: AGM Kljdpsymtxfofx Afdor Battery year of manufacture: 2025

Condition: used, Year of construction: 1999, operating hours: 76,000 h, functionality: fully functional, Technical parameters: • Manufacturer: Nouvo Pignone • Type: ENK 32/45 (1999) extraction-condensing turbine • Nominal output of steam turbine set MWe: 10.2 Kjdpfx Afey Drbusdjlr • Maximum output of steam turbine set MWe: 11.2 • Number of casings: pcs: 1 • Live steam parameters: bar/°C: 40 / 420 • LP steam parameters: bar/°C: 4.0 / 180 • Live steam flow: t/h: 40.8 • IP steam flow: t/h: 15.5 • Pressure in the condenser: bar: 0.14 • Operating hours: 76,000 hours Without control and protection system!

Year of construction: 2018, condition: used, Manufacturer : Clextral Model: EVOLUM 32 B135 (Type F Food Industry) Year: 2018 Type: Twin-screw extruder   Screw elements: nominal diameter 32 mm. L/D : 24   Barrel modules: 6 units Barrel module dimensions: Ø 99 mm, length 128 mm Screw speed: max 1200 rpm AC motor: 37 kW (2000 rpm)   Feed hopper Cooling of the barrel and unit Heating: no, this request may require a separate quote. 2 pumps 2 gravimetric feeders: - Manufacturer: Brabender - Models: DDW-M-DDSR20 - Year: 2018 and 2020 Kledpfxjyy S Its Afdjr - Capacity: 2 to 10 kg (2020) and 30 to 70 kg/h (2018)   Technical documentation available Electrical cabinet + HMI (previously used for monitoring; adaptation required). Machine weight: 2,200 kg

Condition: used, mileage: 617,000 km, power: 265 kW (360.30 HP), first registration: 11/2011, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, brakes: retarder, color: green, gearing type: automatic, loading space length: 7,900 mm, loading space width: 2,540 mm, loading space height: 600 mm, Year of construction: 2011, Equipment: ABS, crane, Mercedes ACTROS 3236 / 8x4 PLATFORM 7,90 m + CRANE + REMOTE CONTROL Imported / Accident-FREE IN VERY GOOD CONDITION! ? YEAR OF PRODUCTION: 2011 ? MILAGE: 617 000 km EQUIPMENT: ? ABS ? EL. WINDOWS ? EL MIRRORS ? POWER STEERING ? ENGINE BRAKE ? TACHOGRAPH TIPPER: 790+100 x 254 x 60 cm (L x W x H) CAPACITY: 18 000 kg Kljdpfx Aey A U Rpofder TOTAL WEIGHT: 32 000 kg WHEELBASE: 450/136/140 cm TIRE SIZE: 13R22,5 SUSPENSION: AIR CRANE: HIAB 166 E - 5 HIPRO + REMOTE CONTROL TEL: * KUBA - POLSKI, ENGLISH, DEUTSCH, ITALIANO * SEBASTIAN - POLSKI, DEUTSCH, ITALIANO, ????? * LASZLO - MAGYAR * COSTEL - ROMÂN? (Romana facem toate formalitatile pt export inclusiv nr) RADEK - ????? : 6419

Condition: new, 2-column automatic bandsaw Manufacturer: METALLKRAFT Model: HMBS 340 CNC CALIBER Item no. 3693090 Cutting range, round: 340 mm Saw blade dimensions: 4,600 x 34 x 1.1 mm Standard equipment includes: - Band tension monitoring - Hydraulic saw feed Kljdpfx Afeyzqwpjder - Feed monitoring - Powered chip removal brush - Swivelling control panel - Chip conveyor - Chip container - LED machine light - Coolant system - Operating manual

Condition: excellent (used), mileage: 476,133 km, power: 235 kW (319.51 HP), first registration: 05/1996, fuel type: diesel, tire size: 12.00 R20, axle configuration: 8x4, wheelbase: 4,950 mm, fuel: diesel, color: other, gearing type: mechanical, suspension: steel, Year of construction: 1996, Equipment: electric window regulation, fog lights, = Additional options and accessories = - Side mirrors with electric adjustment - Sun visor - Analog tachometer Ksdpfx Aeyyml Hsfdolr = Further information = Technical information: Number of cylinders: 5 Axle configuration: Tyre size: 12.00 R20 Brakes: Disc brakes Suspension: Leaf-spring suspension Front axle 1: Max. axle load: 6,500 kg; Tyre tread left: 30%; Tyre tread right: 30% Front axle 2: Max. axle load: 6,500 kg; Steering; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 1: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Rear axle 2: Max. axle load: 9,000 kg; Tyre tread left: 30%; Tyre tread right: 30% Weights: Unladen weight: 13,850 kg Payload: 18,150 kg Gross vehicle weight: 32,000 kg Condition: Technical condition: very good Visual condition: very good Damages: none

Condition: used, mileage: 520,000 km, power: 256 kW (348.06 HP), first registration: 06/1977, fuel type: diesel, number of seats: 32, gearing type: mechanical, color: beige, Year of construction: 1977, Equipment: parking heater, soot filter, * Setra 212 HM with 32 seats – 6-speed manual transmission – Toilet – Kitchen – Round lounge area * Diesel – 12,675 cc – 256 kW – 350 hp – Euro 0 – No emissions sticker – 8 cylinders – Air suspension * 32 seats + 1 driver – Auxiliary heater – Radio – Single door at front & rear * Vehicle dimensions: Length: 10,370 mm x Width: 2,500 mm x Height: 3,090 mm * German vehicle – German registration documents – Sale on behalf of customer Kledpfeyy T N Sjx Afder * Errors, misprints & prior sale excepted – Available immediately * Viewing & test drive by appointment only * Contact person: Andreas Vogel * ATTENTION – Vehicles are stored off-site – Please inquire for exact location – ATTENTION –

Condition: used, Year of construction: 1987, functionality: fully functional, ZINSER Flame Cutting System – CNC 500 – Table 3,000 × 8,000 mm Industrial version | CNC controlled | Immediately available Short description: For sale is a robust Zinser flame cutting system with Zinser CNC 500 control and a large cutting table measuring 3 × 8 m. The machine dates from the 1980s and was operating perfectly up to its professional dismantling. The machine is currently dismantled; therefore, a test run is not possible. Inspection of the system and all components is, of course, possible by appointment. Technical data: - Manufacturer: Zinser - Machine type: Not specified - Year of manufacture: 1980s - Control unit: Zinser CNC 500 - Cutting process: Oxy-fuel / flame cutting - Cutting table: approx. 3,000 × 8,000 mm - Condition: used, dismantled Condition & Classification: - System was in operation and fully functional up to dismantling - Dismantled in an orderly and professional manner - Heavy-duty industrial design - Mechanics, table, and gantry in solid condition - Due to age, not a modern high-speed CNC, but: x very robust x straightforward technology x ideal for refurbishment, modernization, or continued use Scope of delivery: - Cutting table 3 × 8 m - Gantry / carriage - CNC control Zinser CNC 500 - Existing flame cutting components - Sale as inspected Inspection & Collection: - Inspection possible by appointment Klsdpfjyanbbex Afdjr - No test run possible as the system is dismantled - Loading and transport to be arranged by buyer - Location: Germany

Condition: used, Model North - South, clock wise rotation Belt width 600 mm Tiers 32 pcs. Product gap max. ± 89 mm Kledjyx Dm Sopfx Afder Belt length ± 425 m Infeed height 800 mm Outfeed height 5.800 mm Cooling Freon Power 3 x 400V, 50Hz 45 kW total connected power Required cooling capacity: 150 kW Dimensions (l x w x h) : ± 5.660 x 8.080 x 6.530 mm motor compressors and panels not included

Condition: new, Year of construction: 2024, New Grundfos Pump - Vertical, multistage centrifugal pump with integrated frequency converter. inlet and outlet ports on same the level (inline). The pump head and base are in cast iron – all other wetted parts are in stainless steel. A cartridge shaft seal ensures high reliability, safe handling, and easy access and service. Power transmission is via a rigid split coupling. Pipe connection is via DIN flanges. The pump is fitted with a 3-phase, fan-cooled asynchronous motor. The motor includes a frequency converter and PI Ksdpfx Asyug R Rjfdslr controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The operating panel has indicator lights for "Operation" and "Fault". Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box holds terminals for these connections: • pump start/stop input (potential-free contact) • remote setpoint setting via analog signal, 0-10 V, 0(4)-20 mA • 10 V voltage supply for setpoint potentiometer, Imax = 5 mA • three analog sensor inputs, 0-10 V, 0(4)-20 mA • 24 V voltage supply for sensor, Imax = 40 mA • one analog output • three digital inputs • two Pt100 inputs • two potential-free fault signal relays with changeover contact, reporting "Fault", "Operation" or "Ready" • RS-485 GENIbus connection • interface for Grundfos CIM fieldbus module

Condition: new, number 32 Positionen weight 35 kg Basic set 2 / 32 pieces for table top thickness 15 and 25 mm 6 pieces screw clamps 12 pieces quick clamping bolts 2 pieces universal stop 100 mm 4 pieces universal stop 150 mm 2 pieces universal stop 225 mm Kedpfxjupxfne Afdslr 2 pieces stop and clamping angle 175 mm 1 piece hole brush 300 mm 1 piece burner holder 1 piece non-stick spray 500 ml, natural, biologically based 1 piece welding table cleaner 500 ml, natural, biologically based

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Technical condition: New Ksdpfx Aeyn Svxefdolr

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Kljdpfoyn Svrjx Afdor Technical condition: New

Condition: used, functionality: fully functional, Year of construction: 2026, load capacity: 227 kg, empty load weight: 1,179 kg, construction height: 1,970 mm, fuel type: electric, total length: 1,400 mm, drive type: Elektro, construction width: 810 mm, working height: 7,550 mm, Scissor lift Technical condition: New Kjdpfxeyn Svlo Afdjlr

Condition: used, TECHNICAL DETAILS Quenching tank for stirring oil quenching - power : 0.25 [kW] - voltage : 3 x 380 [V] Kledeug U Thspfx Afdjr

Condition: used, Year of construction: 2004, Tenoning spindle 2 St. Number of milling agregates 7 St. Spindle diameter 50 mm # 6726 Weinig Unicontrol 12 CNC ----- Sale on behalf of a customer. Machine connected and ready for demonstration. Including used window tools for Unicontrol 12, OERTLI for various wood thicknesses ----- Brief Summary: ----- - 2 x tenoning spindles each 640 mm length, CNC controlled - "Vario-Table" - 3 x profile spindles each 400 mm length, CNC controlled - FItting spindle + grooving units (top and bottom) - Includes used window tools for Unicontrol 12, OERTLI Kodpfxoyyqm Ie Afdslr programmed and set up for various wood thicknesses and systems (see pdf attached). Detailed Description: ----- crosscut saw ----- Crosscut saw electronically, horizontally infinitely adjustable Number of tools: 1 pc. Spindle speed: 3000-6000 rpm Spindle diameter: 40mm Tool diameter max.: 400 mm Motor power: 3 kW Laser guide light to identify the saw section rounding aggregate ----- Position: horizontally below Motor power: 1 kW Spindle diameter: 20mm Spindle speed: 9000 rpm Tool flight circle max.: 130 mm electronic length stop, length: 3500 mm ----- 1. tenoning Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 2. Tap and Slot Spindle ----- Number of tools: variable, CNC-controlled Tool clamping length: 640 mm Vertical spindle stroke: variable, CNC-controlled Spindle speed: 2800-4000 rpm Spindle diameter: 50mm Tool diameter max.: 380 mm Motor power: 15 kW 1. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 2. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Horizontal spindle stroke: variable, CNC-controlled Spindle speed: 6000 rpm Spindle diameter: 50mm Tool flight circle max.: 232 mm Motor power: 11 kW 3. Profiling spindle ----- Position: horizontally above Tool clamping length: 40 mm Spindle speed: 9000 rpm Spindle diameter: 40mm Tool flight circle max.: 130 mm Motor power: 3.7 kW 4. Profiling spindle ----- Position: vertical right Number of tools: variable, CNC-controlled Tool clamping length: 400 mm with upper bearing Vertical spindle stroke: variable, CNC-controlled Hori...

Condition: excellent (used), Year of construction: 2007, operating hours: 8,000 h, functionality: fully functional, turning length: 750 mm, turning diameter: 330 mm, spindle bore: 41 mm, spindle speed (max.): 4,500 rpm, spindle speed (min.): 1 rpm, spindle motor power: 11,000 W, quill diameter: 50 mm, quill stroke: 110 mm, turning diameter over bed slide: 435 mm, overall weight: 1,400 kg, center height: 165 mm, Equipment: documentation/manual, rotational speed infinitely variable, For sale: cycle-controlled WEILER E30X750 CNC lathe with Siemens 810 D control. Kljdpfx Ajvphv Tofdjr Manufacturer/Model: WEILER E30x750 Year of manufacture: 2007 Control: Siemens 810 D Condition: Good, fully functional Location: Austria (Graz) Inspection: On site or via video call by arrangement Pictures/Video: Additional photos and videos of the machine in operation available upon request. Power-on hours (machine energized): 26,492 h The actual operating hours are significantly lower. Based on experience, spindle run time (actual turning) accounts for approx. 30% to 50% of this (i.e. approx. 8,000 to 13,000 hours). Technical specifications: Working area: Center height: 165 mm Swing diameter over bed: 330 mm Swing diameter over cross slide: 160 mm Center distance: 750 mm Lathe spindle: Spindle nose DIN 55027 / DIN ISO 702-3: Size 5 Spindle bore: 40.5 mm Spindle diameter at front bearing: 70 mm Max. torque at spindle: 180 Nm Main drive: Drive power 100% / 60% duty cycle: 9 / 11 kW Speed range: 1–4,500 rpm Number of speeds: stepless Feed / rapid traverse Feed drive: Three-phase AC feed motors Feed range (stepless): Longitudinal: 0.001–50 mm/rev (Note: also specified 0–20 mm/rev) Face: 0.001–50 mm/rev Feed force: Longitudinal: 6,000 N Face: 3,000 N Max. rapid traverse speed longitudinal/face: 8 / 4 m/min (Note: also specified 10 / 7.5 / 5 / 3.5 m/min) Thread cutting range: Metric threads: 0.1–2,000 mm Inch threads: 112–1/64 tpi Tailstock / quill: Quill diameter: 50 mm Quill stroke: 110 mm Internal taper DIN 228: MK 3 Dimensions / weight: Machine weight: approx. 1,400 kg Dimensions (L × W × H): 1,800 × 1,350 × 1,700 mm Interested? Contact us for further information or to arrange a viewing appointment.

Condition: excellent (used), Year of construction: 2007, Hardinge Talent 6/45 2 Axis CNC Turning Centre (2007) Siemens 810D Control (CCU3) Spindle Motor 11kW VDI30 Turret Spindle Speeds to 6000rpm Max. Turning Lenth 381mm Max. Turning Dia. 284mm Max. Swing over Bed 457mm X Axis Travel 228mm Z Axis Travel 406mm 2800kgs Kedpsyvqdfofx Afdelr *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79161 Machine Serial Number: BLAA7E0070 Cost: £13,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2022, Used machine Year of manufacture: 2022 Features and technical data: - Heavy-duty professional panel saw - With scoring unit; adjustable from outside, with separate drive motor - Sliding table made from anodized aluminum with proven, permanently smooth-running ball contact system on hardened guide rails (10-year manufacturer's warranty from date of initial commissioning) - Saw rip fence with round bar guide; foldable for large panels, with quick clamping and integrated fine adjustment - Table extension - Table widening - Integrated on/off switch on the sliding table - Motorized height and tilt adjustment of the saw unit, digital display for tilt angle - Programmed control of saw blade height, tilt, and the position of the rip fence - Swiveling operator panel at eye level - Quality Made in Italy - Crosscut length: 3200 mm - Cutting height 90°/45° with scorer max.: 136.5/97 mm - Crosscut width left of saw blade max.: 3260 mm - Cutting width with rip fence: 1270 mm - Saw blade tilt: 90 - 45° - Saw blade diameter with scorer max.: 400 mm - Scoring blade diameter: 120 mm Kedox Hbruspfx Afdelr - Main saw blade speed: 3500/5000 rpm - Scoring blade speed: 9200 rpm - Sliding table dimensions: 360 x 142 x 3200 mm - Extraction ports: 120 + 80 mm - Motor power: 7.0 kW, 400 V - Scoring unit motor power: 0.55 kW Dimensions: approx. 3200 x 950 mm Weight: approx. 745 kg Availability: short-term Location: Röllbach

Condition: excellent (used), Bark shredder HBS 1260 Type: 1260-32-EU / n= 324 Model 1260 Ksdpfx Afsxmld Sedolr Capacity: 75-100 m³/h Power requirement: 110-132 kW RPM: 1045 rpm Weight: 2400 kg Chips, dust, and bark conveyors with bark shredder Chips, dust and bark conveyors (several different ones) Manufacturer Tähkä Year of purchase 1996-2005