Used Beckman Vti 80 for sale (17,195)

Year of construction: 2007, condition: ready for operation (used), KAESER BB 88 C TURNING PISTON BLOWER, PVC POWDER FEEDER Unit: BB 88 C. Year of construction: 2007 Pumping speed: 5.07 m³ / min. Final pressure (abs): 1.01 bar Maximum pressure difference: 500 / mbar Rated motor power: 7.5 KW Block speed: 4,270 rpm Pgsdpfxjqafbze Afljp Condition: very good Hablamos español Nous parlons français We speak English

Condition: used, Year of construction: 1974, machine/vehicle number: 4139, functionality: fully functional, pressing force: 80 t, stroke length: 140 mm, table width: 530 mm, table length: 750 mm, ram plate width: 335 mm, ram plate length: 440 mm, Equipment: documentation/manual, For sale is a robust eccentric press from Beutler Maschinenbau with approximately 80 tons of pressing force. The machine is ideally suited for punching and forming operations. Specifications: • Table area: approx. 750 x 530 mm • Ram area: approx. 440 x 335 mm • Ram adjustment: approx. 150 mm • Stroke: adjustable from 20 – 140 mm • Max. installation height: approx. 320 mm Podpfx Aezb Eaqoflegp • Table opening: approx. Ø 230 mm Sold without warranty, ex works. The machine will be delivered without electrical power and compressed air connection. Payment before collection.

Condition: used, Year of construction: 2002, Centerless Grinding Machine BOCCA MALANDRONE R 80/200 CNC GENERAL CHARACTERISTICS: Grinding Wheel Dimensions: Ø610xØ304,8x300 mm Regulating Wheel Dimensions: Ø355xØ152,4x300 mm Psdpfjhzvkdjx Aflogp

Condition: ready for operation (used), Year of construction: 2010, operating hours: 80,000 h, clamping force: 800 kN, total width: 1,480 mm, total height: 2,020 mm, overall weight: 3,550 kg, product length (max.): 4,090 mm, Hydraulic injection moulding machine manufactured in 2010. This Krauss Maffei CX 80-180 features a clamping force of 80 T and a screw diameter of 40 mm. It has a shot volume of 201 cm³ and a shot weight of 183 g. The machine includes a Euromap 67 robot interface and six heating zones. If you are looking to get high-quality injection moulding capabilities, consider the Krauss Maffei CX 80-180 machine we have for sale. Contact us for further details. • Outer length: 670 mm • Outer width: 670 mm • Clamping force: 80.0 T Pjdpfszk Elwsx Afljgp • Screw diameter: 40.0 mm • Tie Bar spacing: 420 x 420 mm • Shot volume: 201.0 cm3 • Shot weight: 183.0 g • 6 heating zones • Hydraulic core • Includes a Sepro sprue picker with the machine

Condition: used, Year of construction: 2004, The SF-80 stands out particularly due to its large pre-stacking capacity of around 450 mm. The envelopes are pre-stacked upright and singulated by a special suction head. The transport occurs without deforming the material. Output conveyor Pgsdpfewv S N Nox Afljp

Condition: ready for operation (used), A mobile Munk + Schmitz vacuum blast machine is available. Blast head diameter: 103mm, blast nozzle diameter: 8mm, effective blast pattern width: approx. 30mm, pressure vessel volume: 60l, abrasive capacity metallic/non-metallic: 200kg/100kg, max. abrasive grain size: 1.6mm, filter area: 21m², dust separation efficiency: 99.9%, machine dimensions X/Y/Z: approx. 2050mm/750mm/2300mm, weight: approx. 550kg. An on-site inspection is possible. Pgjdpfx Aozk Nafjflop

Condition: used, Year of construction: 1998, pressing force: 100 t, For sale is a used die-setting press from the manufacturer REIS with a maximum pressing force of 100 tons. The machine has a table size of 1,100 × 800 mm, a maximum installation height of 950 mm, and numerous features, including an ejector in the table, oil connection boxes for core pulls, and a 180° pivoting ram plate. It is therefore particularly suitable for die-setting operations, tool try-out, and testing in mold and tool making. ##### Technical Data + Information: Die-setting press – 100 tons – 1,100 × 800 mm ==== General Information - Design: 4-column die-setting press - Manufacturer: REIS - Type: TUS 80–100 - Year of construction: 1998 - Pressing force: 26–100 tons (adjustable) - Retraction force max.: 45 tons - Table size: 1,100 × 800 mm - Max. table load: 5,000 kg - Installation height max.: 950 mm - Overall dimensions (W x D x H): approx. 2,100 × 3,395 × 3,670 mm - Total weight: approx. 8,500 kg - T-slots: DIN 650 – 22 mm ==== Hydraulic Cylinder - Pressing force range: 26–100 tons - Retraction force: 45 tons ==== Hydraulics & Drive - Hydraulic pump: REXROTH SYDFE11x71RN0030CAM - Motor power: 7.5 kW - Working pressure max.: 200 bar - Pressure accuracy: ±5 bar - Tank volume: 200 l - Hydraulic oil: HLP 36 ==== Motion System - 180° pivoting ram plate Pjdsxd Tiqopfx Aflegp - Load capacity of the pivoted ram plate: up to 3 tons - Ejector in the ram: 3.5 tons - Ejector stroke: 130 mm - Extendable table - Table can be tilted to both sides - Movable ejector in the table - Oil connection boxes for core pulls - Injection molding filling device in the ram - Quick clamping plate on the ram ==== Control - Operation via control panel - Press force setting - Operation of core pulls - Control: Siemens / Pilz - Digital measuring device ==== Safety - Industrial machine control - Operator panel with safety functions ==== Electrical Connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Connection power main motor: 7.5 kW - Total connection power: 10 kW ##### Application areas: Die-setting, tool try-out, mold making, tool making, injection molding tools, automotive, prototype construction, trial tools, maintenance, production preparation (Die-setting press, try-out press, tool try-out press, hydraulic press, REIS TUS 100, 100 ton press, 4-column press, testing press, mold making press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they comply with all points of the national Brazilian safety standard NR 12, which is based on these. Our core strength lies in special machine construction and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. For the hydraulics of the presses, components from leading European manufacturers are mainly used.

Condition: used, Year of construction: 1985, Second-hand machine Year of manufacture: 1985 Specifications and technical data: - For horizontal and vertical structural drilling - For drilling rows of holes vertically in a 32 mm grid - Vertical drilling unit with dual-spindle drilling heads, freely positionable on an indexing shaft - 1.5 kW motor at 1,400 rpm Psdpfx Afezk N Dwelsgp - 1.5 kW motor at 2,800 rpm - Drilling heads with pneumatic stroke - Pneumatic workpiece clamps - Passage width approx. 850 mm - Includes various stops and drill bits Availability: at short notice Location: Röllbach

Condition: excellent (used), Year of construction: 2012, operating hours: 34,000 h, clamping force: 800 kN, screw diameter: 45 mm, clearance between the columns: 420 mm, displacement volume: 318 cm³, injection pressure: 2,336 bar, plate width: 670 mm, plate height: 670 mm, overall weight: 3,900 kg, Equipment: documentation/manual, warehouse no.: 503569 manufacturer: KRAUSS MAFFEI type: KM 80-750 CX controller: MC6 year of construction: 2012 operation hours: 34000 h Pgedpfx Ajyvz Izofljp clamping force: 800 kN distance between tie-bars h x v: 420 x 420 mm size of mould plates h x v: 670 x 670 mm min. mould height: 250 mm max. mould height: 500 mm max. open daylight: 750 mm opening stroke: 500 mm screw diameter: 45 mm swept volume: 318 ccm injection pressure: 2336 bar equipment included: screen text german core pulling hydraulically 1x machine incl. Handling machine without belt conveyor machine without hopper loader Anti vibration mounts technical data robot-system handling type: integrierter Linearroboter manufacture: Krauss Maffei controller: LRX 100 year of construction: 2012 handling weight: 10 kg operation hours: 3400 h X axis: 550 mm Y axis: 1200 mm Z axis: 1500 mm screen-text: deutsch measures of machine l x w x h: 4.5m x 1.5m x 2m total weight: 3900KG

Condition: reconditioned (used), power: 11 kW (14.96 HP), operation weight: 8,000 kg, Horizontal baler DIXI 80 SLD 2018-2021 Year of construction Semi-automatic 80-tonne baling system for the economical volume reduction of residual materials (recyclables) in industry and trade: Cardboard packaging Tetra packaging Films PET bottles Foam Insulation boards and other compressible materials. Machine dimensions L x H x W approx. mm: 4,320 x 1830 x 2,154 mm Filling opening W x H (standard) mm: 1,040 x 1,110 mm Machine weight approx. kg: 8,000 Press force max. kN: 80 t / 800 kN Ironing cycle (average value) approx. s: 35 Pgjdpoqa Dq Dofx Aflop Bale size W x H x L approx. mm: 1,120 x 1,120 x 1,200 Bale weight (depending on material) approx. kg: 550 - 650 Binding: manual Number of bindings: 4, with wire with Quicklink wire Drive power: 11 kW; 400V/32A The presses are tested and functional and are offered with a fresh UVV and inspection in accordance with DGUV regulation 3. The Dixi 60SLD is ready for immediate use. On request, the Dixi 60 SLD can be completely overhauled for an additional charge. This includes: Replace all hydraulic hoses. Change the hydraulic oil and check the hydraulic unit. The hydraulic cylinders are checked and replaced if necessary. Net price plus VAT and possible transportation. The operating instructions are available and are supplied as a PDF file and in paper form.

Condition: excellent (used), CTS Type: TSS-70/130 Water-cooled refrigeration unit For sale is a high-quality thermal shock test chamber by CTS (Clima Temperatur Systeme), model TSS-70/130. This device is designed for performing thermal shock tests and is typically used in industry, research, and quality assurance. Application Areas: - Material testing - Aging tests - Electronics and component testing - Thermal shock and temperature cycling tests Technical Specifications: Type: TSS-70/130 Test volume: 130 liters Temperature range: - Hot chamber: +50°C to +200°C - Cold chamber: -80°C to +100°C Heating rate: approx. 6 K/min from ambient temperature to +180°C Cooling rate: approx. 4 K/min from ambient temperature to -60°C Temperature deviation: - ±1 K over time - ±2 K spatially Temperature change rate: - max. 100 K/min average for shock test mode (no radiant heat) Transfer time between chambers: - ≤ 15 min for -65°C to +200°C with 10 kg ICs Changeover time: - < 10 seconds Electrical Specifications: Connection: 400 V, 3/N, 50 Hz Nominal power: approx. 17.2 kW Nominal current: approx. 29 A Site fuse: 32 A slow-blow Connection: Cekon 32 Refrigeration System: Refrigerant: R404A / R23 Water-cooled, low noise, fully hermetic Features/Equipment: - CTS control panel - Microprocessor-controlled regulation and monitoring system - Programmable operation (up to 100 test programs) - Digital setpoint and actual value display - RS232 interface - 2 free switching channels for external device control - Fault notification via volt-free contact (Loadable up to 30 V DC, 2 A) - EMC tested Technical Construction: - Hot and cold chambers - Transfer basket with spindle drive - Test chamber/transfer basket made of stainless steel (material no. 1.4301) - Stainless steel wire insert basket - Tube port NW 50 with sealing plug Pgodpjy Hkd Hjfx Aflop - Compressed air connection 1/4" male - Non-pressurized condensate drain R 1/2" female thread - Safety door locking - Lockable door with window Dimensions (according to installation diagram): External dimensions approx.: 2335 x 940 x 1820 mm Installation clearance approx.: 1990 x 940 x 1652 mm Test chamber internal dimensions: height approx. 410 mm, width approx. 480 mm, depth approx. 660 mm Window: 300 x 300 mm Additional Data: Protection class: IP 22 Sound pressure level: < 60 dB(A) Weight: approx. 950 kg Average consumption during test cycle: approx. 8 kWh Important information for your safety as a buyer! The following points are performed on our offered chambers in advance: 1. Functional check and replacement of necessary components 2. If required, refill with legally compliant refrigerant 3. Leak test with certificate 4. After successful inspection, chambers undergo a documented test run. Condition: used Scope of delivery: see photos (Specifications subject to change and errors excepted.) For further questions, please feel free to contact us by phone.

Condition: good (used), Year of construction: 2006, Parts shown by hand not come. Psdpfxszk U Uns Afljgp Machine is in good working condition.

Condition: good (used), Year of construction: 2020, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Podpeziy Dfjfx Aflegp Tying: 4-fold, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. The operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided and any errors that may occur. The offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without any warranty.

Condition: used, Ersatzmesser für Schneidmaschinen - Spare Knife for GuillotinesPolar - Wohlenberg - Perfecta - Schneider Senator 72 - 80 - 92 - 115 - 137 - 155 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Pgodpfx Afjh Ax Scsljp

Condition: used, Year of construction: 1992, Altarfalztasche MBO T800 - 68 - 80 Online-Video-Inspection by Skype-Video Pgjdpjh Ax Naefx Afljp We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, machine/vehicle number: 19028, elektrische Pappschere - electric Board Cutter Robust PS 80Serial-No. 19028 Podpfoh Axtdox Aflegp Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Späneförderband / Waste Conveyor Busch KF 110-80 HF 35 Baujahr / Year 2000 Förderhöhe / Conveying height 1100mm Schüttlänge / Length of delivery chute 800mm Fördergeschwindigkeit bei 50Hz / Conveying speed with 50Hz 0,40m7s Gewicht / Weight 94kgs Waste Conveyors on Saddle-Stitchers, Perfect Binders, Three-Knife Trimmers Späneförderbänder an Sammelheftern, Klebebindern, Dreischneidern Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Pgjdpfovkuqmox Afljp

Condition: excellent (used), Year of construction: 2019, operating hours: 9,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 35 mm, clearance between the columns: 420 mm, displacement volume: 154 cm³, injection pressure: 2,429 bar, Injection molding machine KRAUSS MAFFEI KM 80-380 CX Stock No.: 503701 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control: MC6 Year of manufacture: 2019 Operating hours: 9000 h Technical data, clamping unit side Clamping force: 800 kN Tie bar spacing h x v: 420 x 420 mm Platen size h x v: 670 x 670 mm Minimum mold height: 250 mm Opening stroke: 750 mm Ejector stroke: 150 mm Ejector force: 23 kN Mold weight: 1000 kg Technical data, injection side Screw diameter: 35 mm Injection volume: 154 cc Injection pressure: 2429 bar Screw length: 23 l/d Screw speed: 295 min Free injection rate: 96 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions L x W x H: 4.1m x 1.5m x 2m Total weight: 3800KG Equipment Pgjdpfx Afozizz Eolep Screen text in German Screen text in Polish CEE socket 16A CEE socket 32A Hydraulic core pull 1x Air valve 1x Leveling elements Schuko socket 10A

Condition: excellent (used), Year of construction: 2021, operating hours: 6,000 h, functionality: fully functional, clamping force: 800 kN, screw diameter: 40 mm, clearance between the columns: 420 mm, displacement volume: 201 cm³, injection pressure: 1,860 bar, Injection molding machines KRAUSS MAFFEI KM 80-380 CX Stock No.: 503703 Manufacturer: KRAUSS MAFFEI Type: KM 80-380 CX Control: MC6 Year of manufacture: 2021 Operating hours: 6000 h Technical data, clamping unit Podpoziy Udsfx Aflegp Clamping force: 800 kN Tie bar spacing h x v: 420 x 420 mm Platen size h x v: 670 x 670 mm Minimum mold height: 250 mm Maximum mold thickness: 750 mm Opening stroke: 500 mm Ejector stroke: 150 mm Ejector force: 43 kN Technical data, injection unit Screw diameter: 40 mm Injection volume: 201 ccm Injection pressure: 1860 bar Screw length: 20 l/d Injection rate: 295 g/s PS Number of heating zones: 5 Dimensions & Weight Machine dimensions L x W x H: 4.1m x 1.4m x 2m Total weight: 3900 KG Equipment Screen text in German Screen text in Polish CEE socket 16A CEE socket 32A Hydraulic core pull, 1x Air valve, 1x Machine with water manifold Leveling elements High wear-resistant and corrosion-resistant plasticizing unit Interface for color dosing unit Schuko socket 10A

Condition: used, working width 1.250 mm Pjdpfszkvzvox Aflegp working length 2.200 mm Daylight opening ~ 350 mm Joos HP 80 hydraulic veneer press for gluing veneers, wood, beams, or other pressing tasks, equipped with electric heating plates.

Condition: reconditioned (used), warranty duration: 6 months, Diosna SP 80 spiral mixer - used - capacity: 80 kg of dough / 120 liters - 2 speeds - 2 timers - bowl guard - refurbished Pjdszly Dwopfx Aflogp - 6-month warranty - pickup from warehouse / shipping option available - price on request

Condition: used, Year of construction: 1990, turning diameter 250 mm Psdpfx Afot Hwq Dolsgp turning length 450 mm control TX8D bore 80 mm spindle speed: 3150 U/min. CNC Lathe with Bar Feed and 3 Turrets Very large spindle bore, with bar loading device Please ask for further details.

Condition: good (used), Year of construction: 2000, operating hours: 74,800 h, functionality: fully functional, travel distance X-axis: 800 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, controller manufacturer: Heidenhain, controller model: Mill Plus, spindle speed (max.): 18,000 rpm, operating hours of spindle: 1,234 h, coolant supply: 40 bar, IKZ (Internal Coolant Supply) Pgjdezk Dz Dspfx Aflep NC rotary table (C-axis) NC swiveling head Tool holder: HSK 63, NEW spindle, 1023 operating hours FD function (presumably referring to a specific machine function) Pallet changer Measuring systems: Infrared probe for workpiece measurement Additional magazine with 120 positions Spindle has already been replaced

Condition: ready for operation (used), Year of construction: 1990, machine/vehicle number: A10587, functionality: fully functional, pressing force: 80 t, stroke length: 200 mm, throat depth: 250 mm, controller model: Cybelec DNC 30, distance between stands: 2,050 mm, TECHNICAL DETAILS Pedpfx Afjzk E Acelegp Pressing force: 80 t Bending length: 2,550 mm Frame width: 2,050 mm Table width: 240 mm Maximum stroke: 200 mm Overhang: 250 mm Installation height: 450 mm Stroke speed - downwards, unloaded: 100 mm/s Stroke speed - pressing, loaded: 12 mm/s Stroke speed - upwards, unloaded: 105 mm/s MACHINE DETAILS Control system: Cybelec DNC 30 Oil capacity: 250 l Machine weight, approx.: 8,000 kg

Condition: excellent (used), Year of construction: 2018, Schuma conveyor belt (80) angled, vertical length 1.00 m, horizontal length 1.05 m, belt width 0.35 m, height 1.00 m (adjustable), crossbar height 2 cm, 2018 Pgjdpow Dqhaefx Afljp