Used Behringer Industrial Panel Saw Machine for sale (95,023)

Condition: excellent (used), Panel Beam Saw - With rear lifting table Iedpez Erw Hefx An Iebc Numerical Control POWER CONTROL V2.1 (Power TOUCH) Software CADmatic 5 (TAPIO READY) Lifting scissor table (mm) 3800 x 2200 Rear pushers (N.) 1 with clamps / grippers (7 + 2) Max. cutting width (mm) 3800 - Useful stroke of the pushing system (mm) 3800 Max blade projection (mm) 125 Scoring Unit (max saw diameter / power) mm 180 / Kw 2,2 (ca.) Main Sawing Unit (max saw diameter / power) mm 450 / Kw 28 Adjustable speed of the saw carriage (m/min) 1 - 150 Front supporting tables with Air blowing system (N.) 3 (2 x 2160mm x 800mm + 1 x 2810mm x 800mm) Total power (Kw) 34

Condition: excellent (used), Catalog number: 7885 TECHNICAL DATA - Max. main blade diameter: 400mm - Max. cutting height: 120mm - Main blade adjustable up/down and at an angle - Large blade guard - Spindle diameter: 30mm - Cutting length on the carriage: 1400mm - Cutting width with guide: 1300mm - With a sliding carriage - Guide on the sliding carriage adjustable at an angle - Main blade motor power: 4kW Ijdpeztavisfx An Ijbc - 2 types of rotational speeds: 3000/4500 rpm - Table dimensions: 1120x1020mm - Table dimensions with extension: 1630x1730mm - Diameter of the dust extraction port: 80mm, 140mm - Dimensions (L/W/H): 3300x2180x1450mm – weight: 1040kg ADVANTAGES – Made in Poland – DTR documentation available – Used saw - Very good condition Net price: 9900 PLN Net price: 2302 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)

Condition: used, Year of construction: 2022, Plus freight 4,000.00 € and installation and commissioning 5,000.00 € Grinding system B Sand 5 with partial lathe Working principle The panel is placed on the infeed table. It goes into the partial lathe and centered. It is ground in the grinding system, through and back. The panel is turned in the partial lathe. It is ground on the other side in the grinding system. Then there are two options: either the panel goes onto the outfeed table and unloaded or it comes back onto the infeed table and is unloaded there (the second option extends the working time). Grinding system equipment 1 upper grinding lamella roller suitable for surfaces. Power 3 kW; D 420 mm; L 1300 mm. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. Cross brush suitable for grinding the cross fibers. D 420 mm; L 300 mm. Power 1.1 kW. 3 upper sanding discs for perfectly trimming the longitudinal and transverse wood fibers. Power 1.5 kW each; D 400 mm. Disc brush for beveling edges. The unit functions as a deep brush. After detecting the panel edges, it will follow the door edges. Power 0.75 kW; D 250 mm. Machine features: -The unique sanding system of this machine guarantees perfect wood sanding and/or intermediate sanding of the panels. -All tools are controlled by frequency converters. -All brushes are equipped with quick-release sanding strips without replacing the hub. -The discs are equipped with air bladders to optimize cleaning and service life. -Sanding discs are equipped with a Velcro fastening system. -The feed and rotation speed are PLC-controlled to prevent edge breakage. -High-quality sanding on 4 sides thanks to the system's constant removal rate. -Automatic and rapid unit changeover. - Constant throughput height, PLC and industrial software enable interlinking in a surface line. - Continuously variable speed of the discs, brushes and feed thanks to the fully equipped frequency converter. - Right/left rotation of the discs and brushes with different abrasive grits. - Individually driven feed of the discs, rollers and belts. - Additional adjustment of the brushes and discs to balance the use of the abrasive and to allow for changing the grinding pressure on the surfaces. - Strong support bed made of tubular steel guarantees the best rigidity, stability and flatness. - Planed upper support bed to ensure the best parallelism of the working surface for the grinding discs. - All unit carriages are designed with linear recirculating ball bearing guides, thus high load capacity and high precision. - Motorized feed belt controlled by a frequency converter, 0.55 kW. Machine doors equipped with safety devices. - Machine doors equipped with windows to observe the workpieces during operation. - Under the units, there are 80 mm rubber-coated pressure rollers to hold the workpieces in place during processing. · Low follow-up costs thanks to individual blade replacement. · Low running noise thanks to the enclosed system housing. · All units have suction housings with their respective suction supports. Cover plate with suction nozzle. · Completely encapsulated machine housing for a clean environment. Ibodovvkipjpfx An Isc

Condition: excellent (used), Year of construction: 1989, functionality: fully functional, Well-maintained cabinet machine for band saws, new model. Includes a clamping device for band saws. Used very little. Iodpfez R S E Rjx An Ijbc Photos show the original condition.

Condition: excellent (used), Year of construction: 1999, Description to follow! Ijdpfoz Ebqiox An Ijbc

Condition: ready for operation (used), functionality: fully functional, Saw motor, pole-changeable: 1.0 / 1.6 kW 6 cutting speeds: Motor stage 1/2: 8, 10, 12.5 m/min and 16, 20, 25 m/min Cutting range at 90 degrees with a blade size of 360 mm: round: 110 mm flat: 200 x 80 mm Saw blades: 315 / 360 mm Ijdpfjzy Egtex An Isbc Saw feed: hydraulic Material feed: hydraulic, min. 10 mm Material clamping: hydraulic 2 additional saw blades --> --> Special price: EUR 4,000.00 net, free on board!

Condition: excellent (used), Bargain in excellent condition: panel saw and spindle moulder with tooling Ibjdpfey Ni Aysx An Ijc

Condition: used, total length: 4,210 mm, total width: 1,200 mm, total height: 2,450 mm, Year of manufacture: 2019 Colour: Black Weight: 600 kg - Year: 2019 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 5025 CV - Max. cutting height horizontal [mm]: 1550 - Max. cutting width [mm]: 3300 - Max. cutting depth [mm]: 55 - Min. saw blade diameter [mm]: 250 - Max. saw blade diameter [mm]: 250 - Arbor saw blade diameter [mm]: 30 Ibjdozk Ia Depfx An Ijc - Horizontal cutting: Yes - Vertical cutting: Yes - Voltage [V]: 400 - Current consumption [A]: 6.6 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 4210mm x 1200mm x 2450mm (l x w x h) - Transport weight [kg]: 600kg - Transport packages [pcs.]: 0 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), functionality: fully functional, Vollmer sharpening machine for band saws, in a robust design. Feed from the left to the grinding wheel. Isdszmg I Sopfx An Iobc Blade width up to 360 mm. 3 switchable tooth profiles. Grinding wheel diameter 250 mm. Infinitely variable feed drive, frequency-controlled. Linear feed system. Stable support and guide blocks, height-adjustable. Machine has been technically inspected and tested.

Condition: used, total length: 4,850 mm, total width: 1,300 mm, total height: 2,230 mm, Year of manufacture: 2001 Colour: White Weight: 750 kg - Year: 2001 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 106152 - Max. cutting height vertical [mm]: 1850 - Max. cutting width [mm]: 4150 - Max. cutting depth [mm]: 55 - Max. saw blade diameter [mm]: 250 - Vertical cutting: Yes - Voltage [V]: 380 Iedjy Izicspfx An Iobc - Current consumption [A]: 8 - Fuse [A]: 16 - Power [kW]: 3.0 - Transport dimensions: 4850mm x 1300mm x 2230mm (l x w x h) - Transport weight [kg]: 750kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: new, Cutting length 4300 mm Cutting height 2150 mm automatic , ELCON precision panel saw type D 215 ----- Cutting height: vertical 2,150mm, horizontal 2,100mm Cutting length: 4,300mm ----- Technical description: Cutting depth: max. 60mm Saw blade outlet behind the plate: max. 25mm Saw blade: diameter 250mm, bore 30mm, Z=48 hollow roof tooth Saw blade rotation: 5,100 rpm. Motor: 4 kW (S 6) Measurement reading for: horizontal saw cuts: via scale and strip cutting stop vertical saw cuts: above scale Extraction nozzle: 100 & 80mm Required air pressure: 6 bar Features: -Material support with 1 roll per meter of cutting length, switched on and off by foot pedal suspendable -1 infeed and outfeed roller -pneumatically yielding slatted frame -Central support, 1 support element per meter of cutting length, individually manually fold out -Scoring system: double cut of the main saw blade - Torsion-free, free-standing machine frame -Two folding stops for vertical saw cuts (above and below the middle support) ----- Special price "Partnership Edition" ex works in this version: on request! ----- plus pre-freight, freight, installation and instruction (if the machine does not have to be dismantled) Applies only within Germany. Unloading and cross transport to Installation location is determined by the customer. Price: EUR 1,990.00 plus statutory VAT ----- Iedei Hc S Dspfx An Iobc Options with extra charge: Cutting length 5,300mm instead of 4,300mm Order number: ELCO0075/O049 Surcharge: EUR 2,590.00 plus statutory VAT ----- Technical information according to the manufacturer - without guarantee!

Condition: used, Year of construction: 2009, functionality: fully functional, machine/vehicle number: 35800DNU8, power of the servo motor: 520 W, input voltage: 230 V, type of input current: AC, pneumatic connection: 6 bar, For sale is a Union Special 35800DNU8 feed-off-the-arm industrial sewing machine, offered as a complete workstation with binder and external puller. This heavy-duty unit is designed for continuous seam operations, edge binding, and reinforcement stitching in denim, workwear, and technical textile production. The feed-off-the-arm construction enables efficient handling of tubular garments such as sleeves and trouser legs. The machine is equipped with a high-quality Efka electronic motor and control system, providing precise speed control, needle positioning, and reliable performance in industrial environments. The unit has been used in professional production and was fully operational prior to factory shutdown. Serviced on 27.02.2026. Key features: • Feed-off-the-arm design for tubular and long seam operations • 3-needle chainstitch configuration (35800DNU8) • Binder/folder attachment for edge finishing • External motorized puller for stable material feed • Efka electronic drive system with precise control • Pneumatic functions for automated operation • Heavy-duty industrial construction Includes: • Union Special 35800DNU8 sewing head • Binder / folder attachment • External puller unit • Efka motor and control system • Industrial table and stand • Foot pedal • Thread stand • Pneumatic components Technical details: • Manufacturer: Union Special Corporation (USA) Ibodpfxey Ipy Aj An Iec • Model: 35800DNU8 • Machine type: Feed-off-the-arm industrial sewing machine • Stitch type: Chainstitch (3-needle) • Motor: Efka electronic servo motor • Control: Efka control unit • Voltage: 230V • Pneumatic system required Condition: • Used industrial condition • Fully operational prior to shutdown • Serviced on 27.02.2026 • Typical signs of use • Sold as-is, where-is, without warranty Typical applications: • Edge binding • Reinforcement seams • Denim and workwear production • Technical textiles • Long continuous seam sewing Location: Valga, Estonia Removal & transport: Buyer responsible for dismantling and transport

Condition: used, Year of construction: 1999, - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) Panel dividing saw with infeed table and destacking device Manufacturer: Giben Type: Prismatic 2 h100 SPT Year of manufacture: 1999 Ibedpfxezuyywe An Iec Technical data - Usable cutting length: 1600 mm - Saw blade overhang: 100 mm - Clamping chuck opening: 117 mm - Working height: 950 mm - Lifting table dimensions: 1600 x 2700 mm - Max. stack height: 620 mm - Dimensions: 2444 x 1220 mm, 2500 x 1250 mm - Panel thickness: 6 - 22 mm (+/- 1 mm tolerance per panel and within a panel) High-speed saw carriage - 2 guide shafts: 40 mm - Saw carriage drive via frequency-controlled motor - Feed speed: 1 - 100 m/min - Return speed: 100 m/min Adjustment of the saw carriage speed from the control panel. Automatic cutting length control according to the panel dimensions - Scoring saw speed: 5035 rpm - Carbide-tipped saw blade speed: 3760 rpm - Main saw motor power: 11 kW - Scoring saw motor power: 2.2 kW - Main saw blade: 400 mm - Main saw spindle: 75 mm - Scoring saw blade: 215 mm - Scoring saw adjustment from the outside in stepped increments to: 0.025 mm - Changing the main saw and the scoring saw via a quick-release system (pneumatic) Sliding table - Support table in the sliding table area with free-running roller rails - Top-mounted sliding table with 3 floating clamping chucks with patented, foldable lower clamping chuck fingers - Sliding table drive via servomotor - Drive torque: 6.5 Nm - Feed speed: 1 - 60 m/min - Return speed: 60 m/min - Cable routing via drag chain - 2 front aligners Automatic infeed via lifting table - Dimensions: 1600 x 2700 mm - 4-column spindle lifting table with 12 free-running roller groups - Automatic package height counting when lifting the panels via control - Min. panel dimensions: 2000 x 1200 mm - Max. stack height without pit: 620 mm - Max. load: 12 t - Infeed height: 330 mm Support table - 2 pcs support table with PVC surface 2000 x 510 mm Machine control G-Drive 1D Extraction - 1 extraction port on the pressure bar: 115 mm - 1 extraction port on the lower side of the machine bed: 200 mm - The chip extraction takes place directly at the saw unit via sheet metal ducts into a chip duct arranged along the saw line, which is sealed with flexible rubber lips. Performance parameters - Average cycle time/saw cut: approx. 25 s Quality - Cutting accuracy: +/- 0.15 mm is guaranteed (for straight panels) - Angularity: +/- 0.15 mm/m Note: The technical data and descriptions are a transcript of the original order confirmation. Data is for informational purposes only and is not binding.

Year of construction: 2025, condition: new, DOLFİN- VDL series Drum (Spiral) parts washing machines are used particularly for the purpose of cleaning small parts that are manufactured in large quantities and in bulk. The materials that are poured from the inlet part of the spiral drum in the device are directed towards the outlet part of the drum with the spirals inside the drum. While the drum moves in its own axis according to the set rotation speed, it subjects its parts to, respectively, washing (degreasing), rinsing, passivation and drying processes (varies per the model). Since these processes are sequential and continuous, all processes are completed quickly and effectively within a single device. Full penetration is ensured by pressurized spraying and dipping effects in each section. It is a very functional model of us that is used particularly for washing the bolts, nuts, washers, or such small parts, fittings, nipples, couplers and fittings that are processed in CNC and automated machines in high quantities. Regardless of the metal type of the parts to be washed, they are fully compatible with steel, brass, aluminum copper or stainless steel materials. Since Dolfin Parts washing machines operate as closed loop, new water and new detergent are not used every time. While washing is performed for several times with the same tank, all the dirt remains in the washing cell. With this feature, it protects both nature and employees. Due to its high efficiency and performance, saves energy, water and labor. Ibedpev S Dk Sefx An Iec The device operates continuously in accordance with the values of the washing parameters that have been entered from the control panel before operation. Parts that come out of production in bulk can be loaded into our device in 3 different manners. 1. With Vibrating Loading Chamber, 2.With Lift Conveyor, 3. By coupling to our Customer's existing system, Do not hesitate to contact for more information. We produce for you with 40+ years of experience! We export to more than 30+ countries with quality and trust.

Condition: used, Year of construction: 1992, functionality: fully functional, machine/vehicle number: 66091, input voltage: 380 V, power: 0.37 kW (0.50 HP), type of input current: three-phase, The Martin Mechanic MAS 493/77 is an industrial quilting machine (a special stitching machine) used in the textile industry for quilting and tufting pillows or mattresses. Key technical features of the machine: Application: Specifically designed for heavy-duty materials such as garden cushions, standard pillows, and mattresses. Maximum thickness: Can quilt materials up to 130 mm thick. Quilting function: The machine automatically stitches decorative or reinforcing rings with a diameter ranging from 8 to 18 mm. Ibedpfxozzdule An Ioc If you are interested, please include your contact information in your inquiry.

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: 31 504, functionality: fully functional, cutting height (max.): 2,200 mm, cutting width (max.): 5,300 mm, saw blade diameter: 300 mm, overall weight: 700 kg, plate height: 80 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Maximum vertical cutting height: 2,200 mm Maximum horizontal cutting height: 2,100 mm Maximum cutting width: 5,300 mm Maximum cutting depth: 80 mm Isdpfx Anjz Ea Imo Iobc Saw blade diameter: 300 mm Saw blade bore: 30 mm MACHINE DETAILS Voltage: 400 V Current draw: 10 A Fuse rating: 16 A Power: 4.4 kW Shipping packages: 1 unit Dimensions & Weight Dimensions (L x W x H): 6,660 x 2,070 x 3,010 mm Weight: 700 kg FEATURES CE marking Horizontal cutting Vertical cutting

Condition: used, Year of construction: 1994, Cutting length 5300 mm, cutting height 2200 mm, cutting height 80 mm, manual feed, measuring system: scale, free-standing supports, rated current 21 A. Storage location: Nattheim. Iedpjytrhrsfx An Iebc

Condition: new, Year of construction: 2026, CORMAK HBS320 Metal Band Saw – Precision and Reliable Cutting The CORMAK HBS320 metal band saw is an efficient and professional solution for workshops and industrial facilities that require a reliable machine for precise cutting of pipes, profiles, and solid metal materials. Its robust construction, wide cutting angle adjustment range, and compatibility with material feeding equipment make it a versatile metal band saw for production and service applications. Main Advantages of the Machine - Cutting angles from -45° to +60° – enables mitre cutting in both directions without the need to reposition the material. - Powerful 1.5 kW motor – provides high power and stable operation, even when cutting hard materials. - Cast iron saw arm – resistant to vibrations and heavy loads, ensuring accuracy and long service life. - Precision blade guides – equipped with bearings and carbide inserts to extend blade life. - Safe operation – protective guards and safety microswitches protect the operator and stop the drive when necessary. - Cooling system with electric pump – improves cutting efficiency and facilitates chip removal. Construction and Technology The metal band saw features a welded steel frame and a stable base with an integrated coolant tray. The cast iron saw arm ensures the rigidity of the entire cutting system. Cutting is performed using a gravity-feed system controlled by oil flow through a hydraulic cylinder. The quick-clamping vice and movable bed allow efficient and secure material positioning. The machine offers two blade speeds: 44 and 88 m/min, as well as stepless adjustment of the saw arm feed rate. Cutting Precision and Efficiency Thanks to its robust blade guiding system, the metal band saw maintains high cutting accuracy, even during intensive operation. The cooling system, equipped with a separate coolant tank and pump, helps reduce cutting temperatures and minimise blade wear. Automatic drive shut-off after completion of the cutting cycle prevents excessive wear of the drive components. Applications The CORMAK HBS320 band saw for pipes and profiles is designed for cutting structural steel, stainless steel, tool steel, copper, aluminium, and plastics. It is ideal for metalworking workshops, toolrooms, steel structure fabrication companies, and small-batch or custom production facilities. Standard Equipment - Quick-clamping vice - Hydraulic cylinder with adjustable descent rate - Coolant pump with collection tray and chip drainage system - Two-speed blade drive - Safety microswitch system Optional Equipment - Roller table extension Technical Specifications CORMAK HBS320 Metal Cutting Band Saw Parameter Specification Max. cutting diameter (90°) Ø 260 mm Max. rectangular cutting capacity (90°) 320 x 160 mm Power supply 3-phase, 400 V Motor power 1.5 kW Saw arm descent adjustment Hydraulic cylinder Blade dimensions 2740 x 27 x 0.9 mm Blade speed 44 / 88 m/min Vice height 920 mm Iodpfx Anei D Dgwj Iebc Overall dimensions 1400 x 880 x 1550 mm Weight 280 kg

Condition: good (used), Year of construction: 2001, Max. panel size: 5600 x 2700 mm Saw motor: 18 kW Installation dimensions: 8539 x 13190 mm Max. panel thickness: 40 mm Max. stroke thickness: 110 mm Ibodpfszzpg Hox An Iec

Condition: good (used), Code: 0332 Brand: SALVADOR Model: SEL/600 - CE Standard Longitudinal panel saw for postformed strips and finished components with roller feed and unloader (SPLITTER) – CE Standard Technical data: Cutting width/REF mm 10–650 Cutting thickness mm 10-60 Crosscutting saw blade diameter mm 350 Scoring blade diameter mm 350 Crosscutting motor power Hp 5,5 Scoring motor power Hp 2 Carriage feed speed mt/min 15 Suction port diameter n° 2 mm 160 each Work surface height 900 mm Workpiece feed right/left The panel saw consists of a cutting unit composed by 2 aligned blades. One blade scores the material and the other performs the cut Ibjdpfx Asyu Uk Sjn Iec Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Roller diameter 80 mm Idler roller feeder width 800 mm Idler roller feeder length 3000 mm Stop guides Compressed air 6-8 atm Weight kg 1900

Condition: new, saw blade diameter: 303 mm, cutting length (max.): 5,300 mm, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, Equipment: scorer, Striebig Control18 6224 Cutting range: 6224 L: 5300 x Hvert: 2240 / Hhor: 2100 x D: 80 mm Saw frame - Production of the machine in the precision parts to 1/100 mm - Solid, self-supporting, firmly welded, torsion-resistant saw frame - TRK1 full-surface support wall made of birch plywood with integrated small parts support - Auxiliary fence profile with its own measuring tape and 3 auxiliary fences for repeat cuts - Automatic detection of the center support - Automatic roller blocking during the saw cut Saw beam - Sturdy, durable steel saw beam construction - Automatic saw beam locking with interface detection Saw unit - Backlash-free, smooth-running guides - Robust bearing of the motor carriage ensures high cutting precision - Powerful, high-torque 5.5 kW motor (7.5 hp) - More convenience thanks to largely automated operation - Laser-supported display of the horizontal cut - Automatic motorized carriage clamping - Automatic plunging and tilting of the saw motor - Pneumatic clutch for easy changeover to manual operation - SUPERSILENT sound insulation to reduce saw blade noise - Electromagnetic motor brake - ProLock Easy-Fix tool clamping system Control system - 12" touchscreen computer with optimum operator guidance - Multilingual operator guidance - Tool database guarantees high flexibility and absolute repeat accuracy - Fully automatic sawing sequence - Infinitely variable feed speeds 10-25 m/min - Selectable sawing cycle - End of panel detection - Constant return speed - Operating hours counter - Network connection - UPS 24VDC for touch PC (uninterruptible power supply) Ibedpsu Nhbyofx An Ijc - Automatic saw beam positioning ASP Ground adjustment - Digital measuring system DMS.x (horizontal axis for vertical cuts) - Electronic positioning system EPS.y incl. ABO (vertical axis for horizontal cuts) Design, ergonomics - STRIEBIG typical product design - Multiple awards (including the Swiss Design Award) - Functional and user-friendly ergonomics Mounting - Wall or free-standing installation possible - VSA scoring saw unit (infinitely adjustable scoring saw) - Paper holder - Small parts support, aluminum compl. (2-part) - Striebig cutting optimization STRIEBIG ExpertCut CON

Condition: used, Max. saw blade diameter: 800mm, feed speeds: 3, max. feed 80teeth/min, motors: 2. With dressing device and coolant system. All motor cables and switch connectors were replaced. The machine was completely dismantled, cleaned and workshop-overhauled. Documentation available. Inspection possible by appointment. Isdpez A Ekbjfx An Iobc

Condition: good (used), Year of construction: 2007, Code: 0325 Brand: STETON Model: REBECCA - CE Standard Panel saw with tilting blade and scoring unit for furniture, joinery, panels, wooden window frames, doors, plastics, composite materials and various - CE Standard - Year 2007 Technical data: Aluminium carriage length 1500 mm Useful squaring 1610 mm Blade tilt 90-45° Max blade diameter 350 mm Hole 30 Cutting height with blade at 90° - 115 mm Cutting height with blade at 45° - 95 mm Blade motor power 4 Hp Scoring unit blade diameter 100 mm Hole 20 Scoring unit motor power 0,75 Hp Parallelogram blade guard with protective cover Square width on table 1050 mm Ibodpjyt I D Nofx An Ijc Suction port diameter mm 120 and 60 Overall dimensions for transport mm 1700 x 1700 x 1450 h Weight kg 600

Condition: excellent (used), Year of construction: 2008, BÖSCH/HEWEMA universal miter fence A97 for panel saws When in the closed position, 90° angle cuts are performed. When adjusting the cutting angle, the two fence profiles are moved synchronously. Cuts can be made on both the front and rear supports. The saw angle is read on the scale disc. Ibjdpfx Aszbytlsn Isc

Condition: used, machine/vehicle number: 008441, Max. panel width: 1100 mm Max. panel length: 5700 mm Max forward speed: 30 mt/min Number of shafts: 1 Motor Power: 90 KW Ibjdpfx Anoyz Slbo Ioc