Used Cable Laying Machine Tiger-Schlitzi Ohne Antrieb - Year 2023 for sale (83,550)

Condition: excellent (used), Year of construction: 2007, Operating hours are shown in the photos. Isdszcvwvopfx Ah Aoti

Condition: excellent (used), Year of construction: 2002, 6 axles Operating hours approx. 50,000 hours. Itjdpfx Ahjzcvwcs Aoi

Condition: excellent (used), Year of construction: 2002, Operating hours: approximately 39,000 hours. Isdezcvvfopfx Ah Aoti

Condition: used, Thread rolling machine UPWS 25. Itodpszd Rf Njfx Ah Aei

Condition: used, mileage: 1,600 km, first registration: 07/2010, fuel type: gas, empty load weight: 3,175 kg, maximum load weight: 1,825 kg, overall weight: 5,000 kg, axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel, front tire size: 6.50 -10, rear tire size: 225/75 R 16,5, Equipment: cabin, trailer coupling, Vehicle location: Bovenden, short wheelbase, rear window, automatic transmission, leaf spring suspension. Body: Tractor unit, 1,600 operating hours. Tractor unit with Vortec GM gas engine, kilometers = operating hours. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Iedpei Rpm Nefx Ah Ajti

Condition: used, mileage: 3,439 km, first registration: 07/2010, fuel type: gas, empty load weight: 3,175 kg, maximum load weight: 1,825 kg, overall weight: 5,000 kg, axle configuration: 4x2, color: white, driver cabin: day cab, gearing type: automatic, suspension: steel, front tire size: 6.50 -10, rear tire size: 225/75 R 16,5, Equipment: cabin, trailer coupling, Vehicle location: Bovenden, short wheelbase, rear window, automatic transmission, leaf spring suspension Itedsi Rpqaepfx Ah Aei Type of vehicle: Tractor unit, 3,439 operating hours, equipped with a Vortec GM gas engine, mileage = operating hours. ACCESSORY INFORMATION PROVIDED WITHOUT GUARANTEE, subject to changes, prior sale, and errors!

Condition: excellent (used), XYZ SLX 555 x 3M CNC Lathe (2016) Stock Number 2851 Protrak SLX CNC Swing over bed 560mm Swing in gap 935mm Swing over cross slides 350mm Distance between centres 3000mm Spindle bore 104mm Additional Features Protrack SLX Control Drilling Attachment 4 Way Toolpost 3 Jaw Chuck Isdpfox Hp I Rox Ah Aeti 3 Point Steady

Condition: excellent (used), XYZ 1500 Turret Milling Machine (Ex College) 2 Axis Newhall DRO Spindle Taper R8 Spindle speeds to 500 – 3500rpm Table Size 1069 x 228mm X – 610mm Y – 305mm Knee Travel: Z – 362mm 415V Electrics Itodpfxsy N Ak Rs Ah Aoi Year 2014 Serial Number 103080 Stock Number 2867

Condition: used, Year of construction: 2011, Fully functional Itodpozd Tlrsfx Ah Aji

Condition: used, Year of construction: 2021, operating hours: 247 h, functionality: fully functional, machine/vehicle number: Tecto DC2 BS, input voltage: 400 V, total width: 1,170 mm, total length: 3,750 mm, total height: 1,230 mm, temperature: 2 °C, type of input current: three-phase, cooling capacity: 3,845 kW (5,227.74 HP), ambient temperature (min.): 4 °C, control cabinet height: 1,230 mm, control cabinet length: 3,750 mm, control cabinet width: 1,170 mm, overall weight: 300 kg, Refrigerated counter on 2 levels for displaying refrigerated goods. The bottom level is for wrapped accessories. The top level is for dispalying fresh seafood / meat / cheese / deli. Excellent Italian quality. There are fridge in both levels. Model: Tecto DC2 BS. Cooling requirement: 3845W (for 24/7 use) Color code: RAL7035 / RAL9006 Lengt: 3,75 meter Itjdsy T Iimepfx Ah Aei Depth: 1,17 meter Hight: 1 meter 23,5 cm Cooling maschine: Split R452a Need electrician, plumber and refrigeration technician to install it.

Year of construction: 2021, condition: good (used), 1 x Box Taping Machine Model: AS523S Year: 2021 Itsdey T Nbdopfx Ah Aoi

Condition: good (used), Schmedt PraLeg XL 18-60 Case in machine + Schmedt PraForm 21-50 Press Manufactured in 2022. Schmedt PraLeg XL 18-60 Book Hanger Machine in good condition, ready to operate. The machine hangs a book block into a prepared hardcover. Two gluers, smooth glue thickness adjustment. Format: Block height: 80 – 450 mm Block width: 110 – 450 mm Block thickness: 2 – 80 mm Production rate: approx. 200 – 300 pcs/h Power supply: 230V Weight: 300 kg Made in Germany. Isdpfxszdazbs Ah Ajti Schmedt PraForm 21-50 Book Press Book press with groove cutter. Made in Schmedt, Germany. The machine is in very good condition, ready for production. Technical specifications: Maximum format: 420 x 520 x 100 mm Weight: 220 kg Power supply: 230 V + compressed air. Price is for a set of two machines.

Condition: good (used), EBA 551-06 Paper Cutting Machine The machine is in very good condition. Ijdozdayqjpfx Ah Asti A high-performance, precise hydraulic cutter – for small and medium-sized printing houses, bookbinding shops, and digital printers. Equipped with programmable controls, it is designed for low-volume, frequently changing orders. Control: Program storage capability Data entry via a decimal keypad Electronic digital display with 1/10 mm accuracy Electronic handwheel with stepless rear stop speed adjustment Machine diagnostics with on-screen error indicator Program start with the „start” button MM/INCH switching Hydraulic knife and pressure beam drive Photocells Cutting line Side tables Foot pedal for pressure adjustment Safety guards on the rear table Technical data: Cutting length: 550 mm Infeed depth: 570 mm Stack height: 95 mm Front table depth: 460 mm Minimum final offcut: 32 mm Power supply: 230 V / 50 Hz Power: 1.5 kW Weight: 350 kg The set includes: spare knife, cutting stick, operating tools, instructions.

Condition: good (used), Minipack Torre Mailbag Packaging Machine Iodpfszdavxex Ah Aeti This machine is in excellent condition and ready for production. The photos show the actual product. Made in Italy. Manufacturer’s description: The Mailbag is a compact digital bagging system, ideal for packaging brochures, newspapers, and books. Powered by a single-phase power supply (airless), it’s easy to use with wheels, and the system can be easily moved from one location to another with minimal fuss. A product, such as a magazine, inserted into the feeder activates a photocell, detects the package, and moves the bag and product into the sealing system. A combination of transverse and longitudinal seals closes the package and creates a seal for the next product. The finished package gently falls into the receiving hopper at the bottom of the machine. Technical data: Production speeds, depending on package and film dimensions (up to 1200 pph) Min. package width: 160 mm Maximum package width: 250 mm Min. package length: 100 mm Maximum package length: 360 mm Maximum film thickness: 30 microns Machine dimensions: 600 mm x 840 mm x 1050 mm Weight: 144 kg Power supply: 230V Power consumption: 0.6 kW

Condition: good (used), Year of construction: 1988, functionality: fully functional, WE OFFER AN POWERFULL MANDREL TUBE BENDING MACHINE IT CAN WORK UP TO 110mm tubes bending. MACHINE CAN BE AS WELL RETROFFITTED TO A CNC CONTROL...WITH ADDITIONAL SEVERAL SERVO MOTORS, TO ROTATE HEAD AND MOVE FORWARD. IT HAS CLAMPING SISTEM AND ALL RAILS SAM AS FULL CNC. Machine comes with a lot of tools accessoriess. Machine just turn on and work, ready for operation, Tools from 60 up to 100mm 6 SETS OF TOOLINGS INCLUDED + MANY ACCESSORIESS AND TOOLS Iedpfxjvk I The Ah Aeti We can organize transport and loading.

Year of construction: 2015, condition: good (used), Description Features - PCB Control Board Isdpfjvk Upvox Ah Aeti - PCB Control Panel to Clear Inform Error Message - Well Heating Blade System to Ensure Film Clean Cutting - Well Heating Elements to Ensure Fast and Stable Heating to Achieve Perfect Shrinking Specifications Manufacturer EKH Model -455 Condition Used Power supply 220/230/240V., 50/60HZ., 1-PHASE Maximum consumption power 3.77Kw Effective power consumption 1.6-2.3Kw Sealing dimension Depth 420mm X Length 550mm Maximum height of package 250mm Machine dimension Length 1320mm X Width 820mm X Height 645mm Maximum dimension of film 600mm X Ø250mm

Condition: ready for operation (used), functionality: fully functional, DESCRIPTION OF MACHINE INCLUDED A LOT BELTS A Löser abrasive belt grinding machine offers the most flexible grinding / linishing on the market today. The combination of basic machine plus a variety of contact arms and attachments offers dozens of possible applications for many different purposes. There are over 20 standard attachments available for this machine allowing it to be used for centerless grinding, internal polishing, grinding of hollow bodies and small radius and turbine blade finishing to name but a few. Fields of application of these abrasive belt grinding machines include: *Foundries *Medical engineering *Aircraft industry *Vehicle construction *Mechanical engineering *Specifications Abrasive belt grinding machine, type KS 350 *Grinding belt length 3000-4000 mm *Grinding belt width 5 - 75 mm Loser KS 350 Belt design features:: *Drive motor 4 kW (standard design) with fitted variable speed inverter drive *Drive wheels of 100 - 280 mm diameters = 3 - 46 mtr./sec. belt speed *Mechanical belt tensioning *In case of a belt break the drive is immediately disconnected. Therefore, the risk of an accident is eliminated. *Contact disks of 50 - 400 mm diameters, with a wide choice of grinding attachments for any kind of surface finishing Iedpfxswxrnwo Ah Asti * DC injection breaking unit fitted. *Maintenance-free, dust-proof contact disk bearing with permanent lubrication, contact disk change in less than 1 minute. *LÖSER abrasive belt grinding machines open up new fields of application for belt linishers that in the past could not be processed with normal belt grinders. *When using 3 to 4 m long grinding belts, the 3-contact wheel system ensures the constant and optimal belt speed no matter which contact disk diameter is being used. *Driven by the motor pully, the three pully system allows the belt which is constantly tensioned a higher degree of torque at the same motor rating. *When working with Scoth-Brite disks or belts or with felt polishing belts, the drive can be infinitely adjusted even for speeds as low as 3 mtr. /sec. Due to the advantages offered by the 3-contact point system, any required surface finishing is possible using contact disks from 50 to 400 mm, contact rolls or contact rollers from 15 to 50 mm, contact belts of 6 or 30 mm width, polishing brushes, polishing disks and polishing belts.

Condition: excellent (used), Year of construction: 2007, Hangcha forklift CPCD 80-RW14, 8 ton lifting capacity, with side shifter and automatic fork adjustment. Very good condition, technically perfect, from second owner. Original operating hours only 1170, year of manufacture 2007. 6-cylinder Isuzu engine, dry and flawless. Engine starts immediately, even at minus 10 degrees Celsius. New service, new rear tires. Lifting height 4m, overall height 3.2m, fork length 1.8m; including fork extensions to 2.8m. Lighting, indicators, etc. With cabin, air conditioning, heating – everything works. Own weight 11,490 kg. Itodpfxeyk Hwvo Ah Asi

Condition: new, functionality: fully functional, Year of construction: 2026, BPM-120 CRACK SEALING MACHINE TICAB LLC (Trade Industrial Company AB) — a leading manufacturer of road maintenance equipment in Europe — offers you a cost-effective solution for efficient local repair of asphalt concrete surfaces: the BPM-120 crack and joint sealing machine. Main Application: The BPM-120 fills cracks and joints on asphalt roads, parking lots, sidewalks, airfields, and other road infrastructure facilities. Designed for small- and medium-scale projects! BPM-120 Technical Specifications: • Bitumen emulsion tank: 120 liters • Bitumen pump: capacity up to 10 l/min, working pressure up to 5 bar • Feed system: manual spray wand + 2 m hose (non-heated) • Mixing: manual • Bitumen heating system: diesel burner • Temperature control: automatic (maintains preset temperature) • Purge system: allows cleaning of hose and spray wand after work is completed Thoughtful design for your comfort and safety! Advantages of the BPM-120 model: • Compact size and mobility • Easy to maintain and operate • Direct heating with diesel fuel (no oil layer) • Energy-efficient fuel consumption • High-quality crack and joint sealing ensures pavement durability • Simple construction guarantees reliability in operation Price: • €13,000 without trailer • €15,200 with trailer Itodpfx Ajvrialsh Aei Delivery Terms: • Production time: up to 20 business days after order confirmation • Warranty: 12 months • Delivery: from the manufacturer’s warehouse • Support: manual, technical assistance, video instructions Contact us today for a personalized consultation! Choose equipment that delivers results — send your inquiry now!

Condition: excellent (used), Year of construction: 2015, operating hours: 300 h, XYZ 560 Mini Mill 3 Axis Vertical Machining Centre Manufactured 2015 Siemens 828D Control Ex college machine less than 300hrs. Spindle Speeds 8000rpm Spindle Motor 15hp Spindle Taper BT40 Tool Magazine 12 Tools Tool Change Time 8secs X Axis Travel 560mm Y Axis Travel 400mm Z Axis Travel 500mm Table Size 610 x 370mm Spinde to Tabel 100 – 600mm XYZ Rapids 20m/min Cutting Feeds 1-20m/min Max. Table Load 300kg Iedsy R Srgepfx Ah Aoti T Slots 16mm Machine Weight 3100Kgs *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79162 Machine Serial Number: MF491 Cost: £27,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2017) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Ijdpfxey R Rdhe Ah Aoti Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Indexing Toolpost Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. 3 Point Fixed Steady Travelling Steady Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79001 Machine Serial Number: SLM00072 £55,000.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, roller diameter: 60 mm, working width: 1,050 mm, sheet thickness (max.): 1 mm, roll metal bending machine Isitan 1050 X 1.2mm Manual 3 roll Bending Machine, excellent condition for sale manufacturer: Isitan 1050X1.2 max sheet width: 1050mm Ijdpfjwk Rlxox Ah Ajti max sheet thickness: 1.2 mm Wire grooves at the ends of the rollers Conical bender roller diameter: 60mm Upper roller removable for easy workpiece removal machine dimensions: length: 130cm height: 100cm width: 65cm weight: 240kg

Condition: excellent (used), Year of construction: 2010, XYZ SMX 5000 3 Axis CNC Bed Milling Machine ProtoTRAK SMX Control Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Manufactured 2008 Table: 1930 x 355mm 4 off T Slots size 15.9mm Max load 850kgs Travel: X – 1524mm Y – 596mm Z – 584mm Itedpjy Ni Ivsfx Ah Asi Dims: W - 5805mm D – 2530mm H – 3143mm Weight - 3100Kgs For sale with *Jet Machinery Ltd* Stock No: 79199 Serial No: 11273 Price: £24,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2012, XYZ SMX 4000 ProtoTRAK CNC Bed Milling Machine ProtoTRAK SMX Control Year of Manufacture 2012 Spindle: 7.5Hp – Programmable 70 – 5000rpm ISO40 Quill Dia 105mm Table: Ijdpfx Aeyzf Naoh Asti 1474 x 355mm Max load 850kgs Travel: X – 1,060mm Y – 596mm Z – 520mm Dims without travels: W - 2370mm D – 2485mm H – 2660mm Weight - 3100Kgs For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79167 Machine Serial Number: 10836 Cost: £22,500.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 2017, XYZ 2000 Turret Milling Machine (2017) (Ex College) 3 Axis Newhall DRO (X, Y & Knee) Spindle Taper R8 Spindle speeds to 500 – 4200 rev/min Table Size 1270 x 254mm Table Travel: Iedpfx Aexxb Rreh Aoti X - 812mm Y - 406mm Knee Travel: Z - 406mm Quill Travel Z - 127mm For sale with Jet Machinery Ltd Jet Machinery Stock No: #79047 Machine Serial Number: 12907 Cost: £9,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.