Used Centauro T-Star for sale (72,196)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,810 kg, maximum load weight: 34,190 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 12,660 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle to meet your specific requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications. Chassis for semi-trailer containers Fine-grained steel welded construction, semi-trailer plate with replaceable kingpins Container mounts: 1 x 40-foot with gooseneck tunnel Transport of filled tank containers is not permitted. Without rear height adjustment and without foldable center supports, transport of containers without a tunnel is not possible. Front container guide, plug-in type 24-ton, 2-speed support jack, single-sided operation, with straight lower section, without thrust compensation Wheel chocks with holders Aluminum side impact protection Galvanized steel underrun protection Half-shell fenders With anti-spray flaps per EC Rear bumper Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/chassis laser-measured to reduce tire wear and fuel consumption Offset wheelbase mm (combined transport) up to 44-ton gross train weight Lhedpfx Agszlkgcjtek Air suspension 1st axle: automatic lift axle, including forced lowering and start-up assist, operated by 3 brakes (start-up assist is functional up to a 30% axle load exceedance and up to a maximum speed of 25 km/h) Brake system 2-line air brake system; color-coded lines for easy servicing. Spring-loaded parking brake EBS, Electronic Braking System with front EBS socket, without connecting cable Warning: The trailer may only be towed by vehicles that ensure the effectiveness of the ABS! With lift & lower valve Vehicle stability control system Axle load detection via EBS CAN bus signal, for display in the cab; truck must be equipped accordingly; no truck installation required. Wheels and tires 385/55 R22.5, brand selected by the manufacturer Steel rims, factory silver Electrical System 24 volts, multi-chamber lights, LED taillights and brake lights, yellow LED side lighting 2 white front position lights 2 white/red rear lane-marking lights 1 x 15-pin socket at the front, without connecting cable LED work lights on both sides (activated via reverse light) Additional LED work light(s) at the rear, activated via reverse light Operating Instructions The specified gross weight is technically possible; however, depending on the load, the gross weight may not be achieved while complying with the permissible axle, support, and fifth-wheel loads Special permit required if the total train length exceeds 16,500 mm Caution: Transport of filled tank containers is prohibited! Country of registration/plates Germany With DEKRA approval and certificate (per §13 EC - FGV) Prepared for single-line license plate holder Warning sign per ECE - 70 Contour marking with reflective strips per ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau *10-year warranty against rust-through* or hot-dip galvanized *15-year warranty against rust-through* Support legs black coated Customized transport solution Configure your Fliegl vehicle to meet your requirements. The vehicle shown is an example. Production and equipment are customized according to customer specifications.

Condition: excellent (used), Year of construction: 2001, For sale is a used CENTAURO bandsaw 600 with a cutting width of 580 mm. The saw is in very good condition and has been serviced and inspected by our specialist staff. (Fully operational) Technical specifications: - Wheel diameter: 600 mm - Cutting height: 350 mm - Cutting width: 580 mm - Tilting table - Bandsaw blade length: 4480-4580 mm - 3 HP (2.2 kW) motor, 400 Volt Lhedjy Ex Scepfx Agtsk The bandsaw is located in A-8561 Söding and can be inspected at any time during our business hours. Subject to prior sale! Related terms: bandsaw, saws, saw, band Reference: R-R001W

Condition: new, Year of construction: 2026, functionality: fully functional, CNC Milling Machine startech cn k with Store Equipment BRAND NEW MACHINE Compact 3-axis machining center for milling and engraving, suitable for tool diameters up to max. 60 mm with shank diameters up to max. 16 mm. Spindle drive via a powerful 2.4 kW motor. Intuitive, user-friendly machine software for PC included, featuring an open interface compatible with various CAD/CAM programs. Technical Data: - Work table: 760 x 1170 mm - Spindle speed: 24,000 rpm - Maximum workpiece dimensions X: 915 mm - Maximum workpiece dimensions Y: 610 mm - Maximum workpiece dimensions Z: 176 mm - Number of drilling spindles: 1 - Maximum tool diameter: 60 mm - Maximum travel speed X-axis: 5 m/min - Maximum travel speed Y-axis: 5 m/min - Maximum travel speed Z-axis: 2.5 m/min - Suction connection nominal diameter (external): 40 mm Includes: - 5 pneumatic suction cups For positioning on the work table Simple workpiece clamping Lsdjyx Dzvopfx Agtehk - Pneumatic working pressure: 6.5 bar - Compressed air requirement: 120 l/min Incl. wetCAT 141 RS-TOOL M-Class Wet & Dry Vacuum Cleaner by CLEANCRAFT - For extraction of dust from, e.g., hardwood, plaster, paint, concrete - Automatic filter cleaning - Air volume: 4560 l/min - Dust class: M - Container capacity: 41 l - Hose diameter: 33 mm - Sound pressure level: 74 dB(A) - Power input: 1.1 kW - Max. device socket connection: 2.4 kW - Connection voltage: 220 – 240 V - Mains frequency: 50 / 60 Hz List price (RRP): €14,789.00 Available at short notice Shipping available at additional cost

Condition: excellent (used), functionality: fully functional, Hexagon Probe head Tesastar M incl. - Head - Controller - on demand probe (€ 500,--) Lhedpfxjykiwre Agtek

Year of construction: 2020, condition: new, Exhibition machine with AD 2000 Year of construction 2020 Compressor system HOS Suction capacity approx. 650 l/min Filling capacity approx. 520 l/min Explanation Filling capacity at 6 bar working pressure Maximum pressure 10 bar Tank capacity 270 l Number of cylinders 2 Lodpfx Agoxg Ux Eotehk Number of compression stages 2 PU 1 Dimensions and weights Length approx. 720 mm Width/depth approx. 720 mm Height approx. 1770 mm Weight approx. 160 kg Electrical data Output power 4 kW Supply voltage 400 V Mains frequency 50 Hz Noise emission Sound pressure level Lp 80 dB(A) Explanation Sound pressure level Sound pressure level at 1 m distance according to DIN 45635 T 13 Availability: short term Storage location: Flörsheim

Condition: excellent (used), For sale: SEW-Eurodrive WA20/T geared motor with a three-phase DR63M6/BR/TH motor and an integrated 24 V DC electromagnetic brake. The unit is 100% functional, tested, and ready for operation. Before sale, the geared motor was thoroughly inspected and operates flawlessly. The motor housing has some broken cooling fins, which are clearly shown in the pictures. This damage is purely mechanical and does not affect the proper operation, performance, or reliability of the unit. Apart from that, the geared motor shows normal signs of wear and tear resulting from use. Technical specifications: Manufacturer: SEW-Eurodrive Gearbox model: WA20/T Motor type: DR63M6/BR/TH Power: 0.12 kW Supply: 3×230/400 V AC, 50 Hz Motor speed: 900 rpm Output speed: 15 rpm Gear ratio: i = 60 Torque: 32 Nm Lhodpsznaq Nofx Agtjk Electromagnetic brake: 24 V DC Protection class: IP54 Insulation class: F Rated current: 1.00 A (230 V Δ) / 0.57 A (400 V Y) Power factor (cos φ): 0.65 Duty cycle: S1 Weight: 9.46 kg

Year of construction: 2022, condition: used, Weber CR 9 MDM Hatz Diesel Vibratory Plate / Year of Manufacture: 2022 / Electric Start / DEMO Unit Selling price: €9,990.00 net / €11,888.10 gross Technical data Engine: Hatz Diesel Engine power max.: 11.0 (15.0) kW/HP Weight: 740 kg Centrifugal force: 100 kN Frequency: 65 Hz Working width: 75 cm The reversible soil compactors in the CR series impress with their high compaction performance and maximum efficiency. For compaction work ranging from classic road and civil engineering to paving, they are therefore the first choice. Balanced running characteristics, high smoothness and low hand-arm vibration ensure a high level of operator comfort. - Precise, stepless, electro-hydraulic switching of forward and reverse operation via fingertip control - Engine protection - Throttle cable and hydraulic switching protected and routed in the guide rod - Low hand-arm vibration - Fatigue-free working with the height-adjustable handlebar - Protection of machine and engine by protective frame and complete engine fairing - Reduced maintenance effort due to the self-adjusting centrifugal clutch - Easy service, as all maintenance components are easily accessible - Safe and quick loading thanks to large, foldable lifting eye - Secure lashing for transport thanks to additional eyelets in the engine console - Increased operator comfort thanks to electric start with operating hour counter, engine oil and battery voltage monitoring - Areas of application: road and civil engineering, trench construction, garden and landscape construction, sub-base for paving, compaction of paving and compaction of sand, gravel or stone Lodpeznrtijfx Agtehk We have a very large selection of different vibratory plates in our warehouse, which are immediately available! Please contact us for this at . If desired, we will also be happy to provide you with a financing offer. We are an official Weber MT sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Westtech sales and service partner. We are an official Magni telescopic handler sales and service partner. We are an official DMS sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. We are an official Seppi M. sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Weber MT range for you! Errors and prior sale excepted! Internal No: 071417 = More information = New: Yes Unladen weight: 740 kg Engine brand: Hatz Please contact Marius Herden for further information.

Condition: used, functionality: fully functional, Year of construction: 2007, machine/vehicle number: 2451458, load capacity: 750 kg, lifting height: 26,200 mm, platform length: 5,600 mm, platform width: 1,300 mm, overall weight: 18,770 kg, transport length: 5,600 mm, transport width: 1,320 mm, transport height: 4,100 mm, fuel type: electric, color: blue, Equipment: all wheel drive, differential lock, Technical Specifications - Year of manufacture: 2008 - Drive: Electric 4WD - Working height: 28.20 m - Platform height: 26.20 m - Platform extension: 2.20 m - Load capacity: 750 kg - Platform dimensions (L x W): 5.60 x 1.32 m - Overall dimensions (L x W x H): 5.60 m x 1.32 m x 4.10 m - Total weight: 18,770 kg - Load capacity: 750 kg - Travel speed: 0.5 - 2.3 km/h - Max. gradeability: 25% Lhodpozmdxujfx Agtek All-wheel drive, all-wheel steering, foldable guardrail, fully functional, normal signs of use.

Condition: used, Year of construction: 2013, lifting height: 13,500 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 7.590 kg Lsdpjv Tiwtofx Agtshk Functional Lifting capacity: 750 kg Working height: 1.550 cm CE mark: yes Condition General condition: average Technical condition: average Visual appearance: average Other information Delivery terms: EXW Transport dimensions (LxWxH): 4,65x2,44x2,26 Production country: NL Additional information Please contact Christian Theißen for more information Manufacturer: Holland Lift Model: Monostar Q-135EL24 Year of build: 2013 Condition: Used Data: Max. working height: 15,45 m Max. platform height: 13,45 m Lifting capacity: 750 kg Lifting capacity on extension: 750 kg Drive type: Battery Platform dimensions LxW: 4,23 x 2,26 m Platform length pushed out: 6,02 m Total dimensions LxW: 4,65 x 2,44 m Height transport position with railing: 3,02 m Height transport position without railing: 2,26 m Movable up to working height: 15,45 m Ground clearance: 0,16 m indoor use only: neo Empty weight: 7.590 kg Special features: white wide tires, high load capacity, large platform.

Condition: used, mileage: 445,000 km, power: 169 kW (229.78 HP), first registration: 11/2017, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, emission class: euro6, Year of construction: 2017, Equipment: ABS, electric window regulation, fog lights, power assisted steering, power mirror, spoiler, tail-lift, = Additional options and accessories = - Disc brakes - Immobilizer - Radio - Radio CD player - Roof Spoiler Lodpfeznvphex Agtshk - Speed limiter = Remarks = Mercedes Atego 1223, 2017, 445,000 km Euro 6, Frigoblock cooling, Engine won't start - but it does turn over. = More information = Front axle: Steering Rear axle: Double wheels GVW: 11.990 kg Tail lift: tail lift Cooling engine: engine driven = Dealer information = Bank data: Rabobank Account: 39.33.10.655 IBAN: NL73RABO0393310655 Swift code: RABONL2U - Always check our bank details before transaction! - Reservation of vehicles is not possible without a deposit. - Writing and text errors are reserved for all vehicles offered.

Condition: excellent (used), power: 191 kW (259.69 HP), fuel type: diesel, color: white, lifting height: 56,080 mm, first registration: 06/2014, mast type: telescopic, Year of construction: 2014, Purpose: Construction Drive: Wheeled Number of cylinders: 6 Mast: Telescopic (4 sections) Mast length: 56.08 m Lifting capacity: 110,000 kg Ledpfx Agjwudg Djtehk Superstructure brand: TEREX TR110 QUADSTAR 1100 + JIB Technical condition: very good Visual condition: very good

Condition: used, maximum load weight: 35,350 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 06/2026, next inspection (TÜV): 06/2027, Equipment: ABS, Excerpt - Equipment Frame 10110.122 Regular ladder frame in lightweight steel construction with continuous cross members. 10115.010 With chassis frame pre-tension. 10300.108 Coupling plate approx. 8 mm thick, with a 2-inch drawbar eye according to DIN 74080 / ISO 337. Chassis I 17160.010 Axle lift mechanism on axle 1. I 17165.103 Axle lift control fully automatic, load-dependent. Starting assistance: Activated by pressing the brake 3 times. 30% overload up to a speed of 25 km/h. 18330.700 Manufacturer of choice: Kögel - Three-axle unit, with disc brakes Ø 430 mm, approx. 120 mm mounting depth. Air suspension with approx. 180 mm travel. Vehicle tires I 20540.037 Tires 6x 385/65 R 22.5 BRIDGESTONE R179 XM 160 K (158 L). Chassis components 20110.010 Kingpin supports (manufacturer of choice: Kögel) mechanical with leveling foot, approx. 24 t lifting capacity. Single-sided operation on the right side in the direction of travel. I 21070.117 Splash guard system (spray mist suppression) according to Regulation (EU) No. 109/2011 for three-axle unit with tires 385/65 R22.5, consisting of 1 pair of quarter-circle fenders in front of the axles, 1 pair of straight fenders with splash flaps between the 1st and 2nd axles, and 1 pair of quarter-circle fenders with splash flaps behind the axles. 21300.001 2 chock blocks with holder. I 22070.008 Deletion of the standard side protection. I 25010.170 Storage box for storing: 10 side panels, folding battens and rear door or rear flap. Fully enclosed, protected against spray, simultaneously serves as side protection. I 25090.220 Ground clearance (front) approx. 220 mm. I 25620.101 2 plastic toolboxes, waterproof, dimensions (internal) approx. 545 x 400 x 400 mm. Installed at the rear, 1x on the left and 1x on the right. I 26110.005 Deletion of access ladder. 27510.010 High, rigid underrun protection at the rear made of steel according to ECE-R58. I 71800.020 1 pair of retractable warning boards for overwidth loads, retroreflective red/white, with LED lighting, spiral cable and plug connection. Arrangement in the front and rear vehicle area. Brake/Air suspension system 32110.057 EBS system 2S/2M with stability program (includes ABS/ALB function), EBS plug connection ISO 7638, (without connection lines), parking brake as spring brake, external pneumatic connections as well as external EBS diagnostics connection via ISO 7638 plug connection. I 32125.010 EBS system (manufacturer of choice). 33420.040 Air suspension system incl. 1 lifting and lowering valve, mounted on the left behind the axle unit in the direction of travel. Driving position is automatically adjusted. 34320.001 2 non-interchangeable coupling heads at the front, ISO 1728. 34410.010 Air reservoir for brake system and air reserve made of steel (EN 286-2). Floor 40510.120 Plate floor approx. 30 mm thick. I 40513.020 Floor sealed around the perimeter. I 40542.023 Girder pockets for square tube inserts approx. 80 x 80 mm, Lhsdpfx Aszrkbgegtok arrangement according to drawing J9: 8 pieces of girder pocket rails (18 girder pockets per rail: 4 pieces each on the outside + 10 pieces in the middle). Superstructure I 46538.010 Meets superstructure strength according to EN 12642 XL (VDI 2700). Tested for a payload of approx. 27,000 kg. Front wall I 40532.260 Storage for max. 20 square tube inserts approx. 80 x 80 mm (length approx. 1,990 mm) on the inside of the front wall. I 41710.201 Front wall approx. 2,000 mm high with volume corner supports made of steel, with profi

Condition: new, bore capacity in steel (diameter) 30.0 mm throat 293 mm bore stroke 140 mm morse taper 3 MK table: 515 x 360 mm turning speeds 225 - 4300 U/min column diameter 115 mm distance spindle /table 132 / 724 mm engine output 1.0 / 1.6 kW weight 260 kg Machine height 1790 mm NEW ALZMETALL MODEL RANGE 7 "TFT - LCD display with touch function: Lsdpfx Aexaap Asgtshk * Spindle speed setpoint * Actual speed display * Integrated drilling depth display * with touch zero point transfer * Virtual drilling depth scale in the display * Machine status displays and warnings in the display * Service information * Selectable user language: DE / EN / FR / ES / IT / NL / RU. Furnishing: - Infinitely variable speed setting by means of an adjusting lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - counterclockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Main switch, lockable - Right and left rotation by contactor control - Control voltage 24 volts - Protection class IP 54 - Painting: DD textured paint, signal white RAL 9003 PANTONE 7545c, black

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 540 mm, cutting width (max.): 880 mm, control type: manual, actuation type: electric, total height: 2,700 mm, total length: 1,800 mm, total width: 1,250 mm, overall weight: 720 kg, table height: 980 mm, Equipment: CE marking, motor brake, – Made in Italy – Year of manufacture: 2019 TECHNICAL SPECIFICATIONS: – Wheel diameter: 900 mm – Max cutting height: 540 mm – Max cutting width: 880 mm – Table height from the floor: 980 mm – Table dimensions: 1170 x 800 mm – Max/min blade length: 6300 / 6100 mm – Max blade width: 50 x 0.8 mm – Motor power: 11 kW – Feed motor power: 0.37 kW – Feed with pneumatic clamping – 10 feed speed settings: 1 - 25 m/min – Roller guide for the feed – Table adjustable for angle: 0° - 20° – Outlet: 2 x Ø 120 mm – Machine dimensions (L / W / H): 1800 x 1250 x 2700 mm – Weight: ~720 kg Lhjdpfx Agozim Nnotsk

Condition: as good as new (ex-display), Year of construction: 2026, operating hours: 1 h, lifting height: 4,700 mm, fuel type: electric, Drivetrain Drive: Wheel Weights Empty weight: 990 kg Functional Lifting capacity: 200 kg Working height: 670 cm CE mark: yes Condition General condition: very good Technical condition: very good Visual appearance: very good Lsdpfx Asztip Segtehk Other information Transport dimensions (LxWxH): 1,48/0,7/1,99 Surface type: Slab Additional information Please contact Tobias Mayr for more information

Condition: used, Year of construction: 2015, fuel type: diesel, Lifting capacity: 230 kg Please contact Gebrauchtgeräte Center for more information Lhsdpfxozkppgj Agtsk

Condition: used, Year of construction: 1994, Second-hand machine Year of manufacture: 1994 Features and technical specifications: Roller diameter 500 mm Motor 1.8 kW Power supply: 430 V Upper precision guide lower guide Telescopic blade guard Cast iron band saw wheels Cast iron table, tiltable up to 36° with automatic motor brake Lodpfszk N Rkex Agtjhk Blade tension indicator Max. cutting height 260 mm Max. cutting width 480 mm Extraction nozzle 100 mm L x W x H 965 x 660 x 1925 mm Weight 280 kg Availability: at short notice Location: 63934 Röllbach

Condition: used, mileage: 1,275,000 km, power: 375 kW (509.86 HP), first registration: 01/2019, fuel type: diesel, overall weight: 32,000 kg, axle configuration: 3 axles, gearing type: automatic, emission class: euro6, total length: 10,600 mm, total width: 2,600 mm, total height: 4,000 mm, loading space length: 8,100 mm, loading space width: 2,500 mm, loading space height: 2,660 mm, Year of construction: 2019, Equipment: ABS, air conditioning, electronic stability program (ESP), soot filter, tail-lift, VOLVO FH 500 I-PARK COOL TRS COOLING VAN BEURDEN BOX WITH TAIL LIFT, EXCELLENT CONDITION Box: Cool/Freeze/Flowers Frigo Van Beurden 28 Cooling: Carrier TRS Iceland, temperatures from -30 to +30 degrees Tail Lift: Dhollandia 2,000 kg First Registration: 2029 TÜV (Technical Inspection): 06/2026 Mileage: 1,275,000 km Engine Power: 375 kW (500 hp) Transmission: Automatic Box Dimensions (L x W x H): 810 x 250 x 266 cm (internal) Truck Dimensions (L x W x H): 1060 x 260 x 400 cm (external) Unladen Weight: 13,960 kg Load Capacity: 14,040 kg Permissible Total Weight: 28,000 kg GCW (Gross Combination Weight): 50,000 kg Color: Red and Beige Suspension: Leaf springs (front), air suspension (axle 2 and 3) Emission Class: Euro 6 C Axle Configuration: 6x2 Tire Axle 1: 385/65 R22.5 L40% R40% Tire Axle 2: 315/70 R22.5 L40% R40% Tire Axle 3: 385/65 R22.5 L40% R40% Extras: Automatic transmission, engine brake, auxiliary air conditioning, auxiliary heater, cooling system, 2 beds, radio/CD player, TRS Carrier Iceland cooling system, temperature control between -30 and +30 degrees Celsius, fully insulated body (year 2028), extremely robust and in perfect condition, 3x stainless steel load securing rails in the floor and ceiling (incl. 3 bars), 1x horizontal load securing rail, numerous additional lights, pneumatic Rockinger trailer coupling, lift axle, ABS, EBS, complete service history available, directly from the first owner, immediately available and ready for use. Can be delivered with the following trailer: 2-AXLE BURG TRAILER VAN BEURDEN INSULATED BOX TRAILER TRS ICELAND Box: Cool/Freeze/Flowers Frigo Van Beurden Chassis Manufacturer and Type: BURG BPM 00-20 TCZXX Cooling: Carrier TRS Iceland First Registration: TÜV (Technical Inspection): 08/2026 Internal Dimensions (L x W x H): 712 x 250 x 285 cm Unladen Weight: 5,700 kg Load Capacity: 14,300 kg Permissible Total Weight: 20,000 kg Suspension: Air suspension Axles: BPW axles with drum brakes Tire Size: 265/70 R19.5 Tire Tread Depth Axle 1: L30%, R30% Tire Tread Depth Axle 2: L30%, R30% Extras: Carrier TRS Iceland refrigeration unit, ABS, EBS, BPW axles with drum brakes, spare wheel, fully insulated box body from Van Beurden, 3x stainless steel rails in the floor and ceiling, 1x horizontal load securing rail, additional headlights, rear doors, rear bumper, complete service history available, immediately available and ready for use. Further information: * Payload: 18,245 kg * Type | Axle 1: Michelin R * Tire Size | Axle 1: 385/65 R22.5 * Tire Tread Depth Inside Left | Axle 1: 40% * Tire Tread Depth Inside Right | Axle 1: 40% * Maximum Axle Load | Axle 1: 9,000 kg * Type | Axle 2: Michelin R * Type | Axle 3: Michelin R * Tire Size | Axle 2: 315/80 R22.5 * Tire Size | Axle 3: 385/65 R22.5 * Tire Tread Depth Outside Left | Axle 2: 40% * Tire Tread Depth Inside Left | Axle 2: 40% * Tire Tread Depth Inside Left | Axle 3: 40% * Tire Tread Depth Outside Right | Axle 2: 40% * Tire Tread Depth Inside Right | Axle 2: 40% Lhodpszi I S Defx Agtsk * Tire Tread Depth Inside Right | Axle 3: 40% * Maximum Axle Load | Axle 2: 11,500 kg * Maximum Axle Load | Axle 3: 7,500 kg * Wheelbase: 677 cm * Tail Lift | Manufacturer: DHOLLANDIA * Tail Lift | Load Capacity: 2,000 kg * Price on Request: Yes * Position | Axle 1: Front * Brand | Axle 1: Other * Brake Type | Axle 1: Disc Brakes * Suspension

Condition: used, Year of construction: 1990, x-travel 0600 mm y-travel 500 mm z-travel 500 mm table-size 500 mm feed range 2- 10.000 mm/min rapid traverse 10 m/min Tool bore ISO 40 Lhodpfxsyq Sk Ue Agtek turning speed range 0- 6300 U/min main drive DC 8 kW CNC control Dialog 11 total power requirement 23 KVA weight of the machine ca. 5050 kg dimensions of the machine ca. 3,0x2,5x2,0 m CNC milling machine with Dialog 11 control, housing arround working area, rotary table as a 4th axe and ATC with 40 Positions. Machine has been refurbished by FPS in 2010.

Condition: used, Year of construction: 2000, x-travel 3000 mm y-travel 1400 mm z-travel 1500 mm table-size 3200 x 1100 mm control TNC 430 B spindle turning speed range 60 - 4000 U/min spindle taper ISO 50 feeds mm/min table load 10 t milling drive 24 kW Center of spindle to wall or column 1229 mm total power requirement 50 kW weight of the machine ca. 22 t dimensions of the machine ca. 6,5 x 3 x 3 m Lhjdpfx Aozrpnxogtek control: Heidenhain TNC 430 B digital. Universal milling head is automatically swivable and turnable in 1,5° steps. Machine has a 20 position ATC, a chip conveyor, an adaptable high speed spindle (30.000 rpm) and a mist cooling arrangement. Machine in program for 25.616 hours.

Year of construction: 2025, condition: new, Tank capacity: 50 l Suction capacity: 365 l Lodpoxnhqdofx Agtjhk Motor power: 2.7 kW / 230V

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 32 [mm] - Travel : 310 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 7,5 [kW] - C axis indexing precision : 0,001 [°] COUNTER-SPINDLE - Max. bar diameter : 32 [mm] - Spindle speeds : 7.000 [rpm] - Spindle power : 3,7 [kW] - C axis indexing precision : 0,001 [°] GUIDE BUSH HOLDER 1 - Number of positions : 11 - Number of motorized positions : 5 - Live tools speed : 5.000 [rpm] - Live tools power : 1,2 [kW] END ATTACHMENT Lodpfx Agsyxr Uqstjhk - Number of positions : 4 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 POWER SUPPLY - Supply voltage : 200 [V] - Total installed power : 6,2 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 2.711 x 1.275 [mm] - Machine height : 1.705 [mm] MACHINE HOURS - Number of working hours : 18436 [h] - Number of spindle hours : 14949 [h] EQUIPMENT - CNC : Fanuc 32i-B - 3 colors status lamp - Rotating guide bush - Coolant tank - Bar loader : FMB TURBO 3- 36 - Ejection of workpiece - Parts catcher - Parts conveying strip - Fire extinguisher * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Electric transformer

Condition: used, TECHNICAL DETAILS - Number of axes : 7 - Number of spindles : 2 MAIN SPINDLE - Max. bar diameter : 20 [mm] - Max. machining length : 205 [mm] - Spindle speeds : 10000 [rpm] - Spindle power : 3.7 [kW] - C axis indexing precision : 0.001 [°] COUNTER-SPINDLE - Max. bar diameter : 20 [mm] - Spindle speeds : 8000 [rpm] - Spindle power : 2.2 [kW] - C axis indexing precision : 1 [°] - Number of guide bush holders : 1 GUIDE BUSH HOLDER 1 - Number of positions : 10 - Number of motorized positions : 4 END ATTACHMENT - Number of positions : 7 SECONDARY OPERATION - Number of positions : 4 - Number of motorized positions : 4 - Live tools speed : 8000 [rpm] POWER SUPPLY - Supply voltage : 400 [V] - Total installed power : 7 [kW] WEIGHT & DIMENSIONS - Machine floor space : 2200 x 1200 [mm] - Machine height : 1700 [mm] - Machine weight : 2200 [kg] MACHINE HOURS - Number of hours under power : 107555 [h] - Number of working hours : 91025 [h] Lhodpfx Aoy Dim Iegtok - Number of spindle hours : 54783 [h] EQUIPMENT - CNC : Fanuc 300is-model A - Rotating guide bush - Parts catcher - Parts conveying strip - Ejection of workpiece - Coolant tank

Condition: like new (used), Year of construction: 2013, functionality: fully functional, input voltage: 400 V, compressed air connection: 6 bar, year of last overhaul: 2025, Useful print format 100x140 cm. Maximum frame size 160x120 cm. Ljdpfjy Rykqox Agtjhk Micrometric horizontal/vertical adjustment of the vacuum bed. Rear off-contact adjustment (known as Sincoprint) with a knob located at the front of the machine, within easy reach of the operator. 3-position selector: manual, single, and automatic, with end-of-print dwell time adjustment before the print carriage lifts. Timer for automatic operation regulation. Dual-function pedal: left pedal starts the machine, right pedal activates sheet vacuum during registration phase. Squeegee and counter-squeegee speed adjustable by potentiometer. INSTALLATION INCLUDED.

Condition: used, mileage: 217,407 km, power: 206 kW (280.08 HP), first registration: 07/2018, fuel type: diesel, tire size: 315/70R22,5, axle configuration: 4x2, wheelbase: 4,300 mm, fuel: diesel, color: white, gearing type: automatic, emission class: euro6, suspension: steel, loading space length: 5,300 mm, loading space width: 2,460 mm, loading space height: 2,200 mm, Year of construction: 2018, Equipment: air conditioning, crane, electric window regulation, Tyre size: 315/70R22,5 Lsdozt Ntwspfx Agtjhk Suspension: leaf suspension Rear axle: Double wheels Drive: Wheel Empty weight: 11.310 kg Carrying capacity: 7.690 kg GVW: 19.000 kg Mast: telescopic (2 parts) Make of bodywork: PALFINGER PK 14.501K SLD5 = Additional options and accessories = - PTO - Tipper hydraulics