Used Citizen L32 Vii for sale (190)

Condition: excellent (used), Double side - Independent Machine (or 1st and/or 2nd in a line) Edges (tape) thickness in rolls (min/max) mm 0,6 - 3 Panels thickness (min/max) mm 8 - 60 / Working width (min/max) mm 225 - 3000 Numerical Control Power Control PC 22 /Software: Wood Commander Adjustable feeding speed (m/min ) 15 - 32 Distance (center-axes) of the Disappearing Dogs (mm) 400 Ledsp N D Ngspfx Akyjrn SIZING PART (for each side): Anti-chipping Milling Unit 1 x Kw 4,5 / Hogging Units KD 11 (2 x Kw 6,6) EDGE-BANDING PART (for each side): Glueing Unit (Hot Melt + Quick Melt Unit) A3 + SERVO Band Pressure zone "A" Edge coils supporting unit (No. 2 reels) Snipping (end-cutting) unit HL 84 (2 x Kw 0,22) Rough Trimming unit (2 x Kw 0,55) Fine Trimming unit 2 x Kw 0,4 Corner Rounding unit (Contour Trimming) FF 12 (4 x Kw 0,4) LEFT SIDE: 2 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 2) 0°-90° RIGHT SIDE: 1 x Jumping Milling Unit (for grooving) UF11 (Kw 4 x 1) 0°-90° Profile edge scraping unit PN10 (PNEU) Finish processing unit (Glue scraper + Buffing unit) FA 11

Condition: good (used), Year of construction: 1993, Power generator is in good working condition. Lrsdoyh U Tqepfx Akyjn Technical details shown on machine plate.

Year of construction: 2001, condition: excellent (used), functionality: fully functional, machine/vehicle number: 3063, used Leistritz Micro27/GL-32D laboratory twin-screw extruder, machine no. 3063 Year of manufacture: 2001 Motor power: 10.5 kW Screw speed up to 500 rpm Screw diameter: 27 mm Cylinder material: 1.8550 nitrided Nitriding layer 0.5-0.6 mm Screw material: 1.2379 Ledpfxoyc Sfpe Akyorn Volumetric dosing Brabender mounted on the gearbox and included in the scope of delivery. Single temperature control unit included in the scope of delivery. Atmospheric degassing, without blind plug Documentation in German available in paper form. tool with nozzle 1 hole approx. 3 mm Condition: used, functionally tested, as is, without warranty You are welcome to view this (and other) extruders at our warehouse in Königswinter The machine can be switched on and demonstrated when empty. The screw has been removed and cleaned.

Condition: used, Year of construction: 2017, operating hours: 3,135 h, 2017 | Haulotte HTL3210 | Used Telescopic Forklift | 3135 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 34000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 59 inspection points 56 approved ✅ 1 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: Good operating telehandler , Some things to fix are the window maybe front window also ( full off scratches) , the end off the mast has a little bend (not real bad but its noticeable ) left front light burst , rear mast plate is missing 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40510 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed Ljdpfeyuytrox Akysrn ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: good (used), Year of construction: 2011, machine/vehicle number: 12355, Offer 25080 Movable panel rack with 10 movable material stands Technical specifications: - Stand - Shelf dimensions / support dimensions W 3000 x H 1800 mm - Shelf depth / footprint 180 mm - Maximum load per shelf: 2000 kg - Slide-in support bracket - Track rail L 4750 mm Lodpfx Aov Ra Idjkysrn - Total space requirement approx. L 4750 x H 2200 x D 4000 mm - Weight approx. 3000 kg

Condition: excellent (used), 4-SIDES LINE of Double-side Sizing and Edge Banding. Workpieces dimensions: min. mm 195 x 250 x 60 / max. mm 1200 x 2500 x 60 Lodpfx Ajiztxyokyorn Composed of the following machines: KZ0400a) Infeed table "HOMAG" Mod. TBL 100/25/12/S with motorized rollers Adjustable feeding speed 7-40 m/min KZ0400b) 1st Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 325/M1/C Adjustable feeding speed 15-40 m/min - with PC 22 SIZING: Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Grooving Unit UF11 (Kw 4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) KZ0400c) Turning Station "HOMAG" Mod. TDL 310 / 25 / 12 (from lengthwise to crosswise) Adjustable feeding speed 20-60 m/min KZ0400d) 2nd Double-side Sizing & Edge Bander "HOMAG" Mod. KFL 326/M2/C Adjustable feeding speed 15-32 m/min - with PC 22 SIZING: Anti-chipping (1xKw 4,5), Double-Hogger KD10 (2 x Kw 6.6) + GLUEING: A3 with 2 reels BANDING: End-trimming HL84 (2xKw 0.22), Overlapped Trimming BF10 (2 x Kw 0.55), NC controlled Fine Trimming PF20 (2 x Kw 0.4), Contour Trimming (Corner rounding) FF32 (4 x Kw 0.4), Free space, Profile Scraper PN10, Finish (Glue Scraper + Buffing) MINIMUM EDGE LENGTH 70 MM (Part thickness for narrow parts max. 25 mm, Edge thickness max. 2 mm, Cycle speed: max. 20 T/min, Feed rate max. 20 m/min.)

Condition: good (used), Serial No. A5E03915601 FS:07 Input: 30AC 400-480V 47-63Hz 10.1A Output: 30AC 0-Input V, 0-550Hz. 7.7A Lredpfx Aoyrqf Hokyon Engine 3kW / 4hp Width: 70 mm Height: 195 mm Depth: 163 mm Weight: 1392 g Condition: Good, second-hand

Condition: ready for operation (used), Year of construction: 2012, operating hours: 8,300 h, functionality: fully functional, spindle speed (max.): 6,400 rpm, bar diameter (max.): 32 mm, controller model: TX 8 i-p, workpiece length (max.): 245 mm, TECHNICAL DETAILS Main Spindle Max. bar capacity: 32 mm Max. workpiece length (swiss turning): 245 mm Lrodpfxoyn Imyj Akyjn Max. workpiece length (short turning): 125 mm Max. spindle speed: 6,400 rpm Sub Spindle Max. bar capacity: 32 mm Max. clamping length for workpiece: 250 mm Max. spindle speed: 6,000 rpm Upper Turret Number of stations: 10 All driven Max. speed: 12,000 rpm Lower Turret Number of stations: 9 All driven Max. speed: 12,000 rpm Backworking Unit Number of stations: 8 Driven stations: 3 (T12, T13, and T14) Speed T12 & T14: 12,000 rpm Speed T13: 4,000 rpm MACHINE DETAILS Spindle hours: 8,300 hours Control system: TX 8 i-p EQUIPMENT Parts conveyor Chip conveyor Coolant pump 20 bar IFS oil mist separator Bar feeder FMB turbo 3-36

Condition: ready for operation (used), Year of construction: 2013, operating hours: 55,000 h, spindle speed (max.): 8,000 rpm, overall weight: 7,000 kg, controller manufacturer: TRAUB, controller model: TX8i-s, number of axes: 7, This 7-axis TRAUB TNL 32-7 horizontal turning machine was manufactured in 2013. Ideal for precision turning operations, it offers robust performance and reliability. Consider the opportunity to buy this TRAUB TNL 32-7 horizontal turning machine. Contact us for more information. Additional equipment • Coolant pump 3 bar / Coolant pump 8 bar • Swarf conveyor, hinged belt type H=1000 mm • Linear encoder X-axis for revolver top/bottom • Fabric filtration for coolant: grade of filtration ca. 30-40 µm Lrsdpfoyrd H Dex Akyjn • High-pressure coolant pump 20 bar • CO2 fire fight system Kraft & Bauer Machine Benefits Technical Machine Benefits • Max bar diameter: 32 mm • Spindle stock stroke: 305 mm • Auto bar loader: fmb lsk38-3200, max. Bar length 3200 mm • Top revolver: x/y/z/h-axis, 10 tools dual drive • Bottom revolver: x/y/z/h-axis, 9 tools same drive; counter spindle independent drive • Conveyor belt for finished parts with gripper • Machine worked only with cutting oil

Condition: ready for operation (used), Year of construction: 2014, spindle speed (max.): 8,000 rpm, number of axes: 9, This 9-axis TRAUB TNL 32 swiss type turning machine was manufactured in 2014. It features a TX8i-s control with a 64-bit RISC CNC/PLC processor, color TFT display, and electronic handwheel. The main spindle supports a 32 mm bore, and the machine includes a sub-spindle with a C-axis. It offers a dual-driven upper tool turret and a lower turret with nine tool holders. Consider the opportunity to buy this TRAUB TNL 32 swiss type turning machine. Contact us for more information. • Control: TRAUB TX8i-s CNC/PLC with 64-bit RISC processor and fiber-optic PC; color TFT flat-panel display; electronic handwheel • Software/extensions included: Polyform (C-axis programming), Helical (3D Y-axis interpolation), tapping without compensating chuck, parting tool breakage monitoring, parting tool ejection monitoring, axis shutdown, T-ATC • Main spindle: Motor spindle with hollow clamping system; 32 mm bore/bar capacity; C-axis max speed 8,000 rpm • Max stroke: 305 mm (L version) / 127 mm (K version) • Sub-spindle: Partial hollow clamping, C-axis; cleaning unit mounted on lower tool turret Ljdpfx Akex D Drcjyorn • Upper tool turret: X/Y/Z/H/B axes; 10 tool holders; dual drive • Lower tool turret: X/Y/Z/H axes; 9 tool holders; combined drive; separate counter-spindle operation • Measuring/feedback: Glass scales on X-axis (upper and lower turrets); rotary encoder on C-axis • Back working: 8-position back table with combined drive for up to 3 tools; prepared for internal coolant supply • Clamping: Clamping direction reversal device and counter clamping pressure device on main and counter spindles • Coolant system: Standard system with 3-bar and 8-bar pumps (50 Hz) in a 500-liter tank; additional 28-bar pump (50 Hz), 19 l/min flow rate • Extraction: Connection D 150 mm for central extraction Additional equipment • None specified (no robots, bar feeder, chip conveyor, or external automation listed)

Condition: used, mileage: 108,879 km, power: 170 kW (231.14 HP), first registration: 11/1993, fuel type: gasoline, color: red, gearing type: automatic, number of seats: 2, This listing is for a repaired accident vehicle. Ledpfx Asyra N Ujkyern

Condition: new, mileage: 500 km, power: 107 kW (145.48 HP), fuel type: diesel, overall weight: 3,500 kg, wheelbase: 3,682 mm, gearing type: mechanical, Equipment: ABS, central locking, electronic stability program (ESP), immobilizer system, onboard computer, Special features - EURO 6D Temp - 6-speed manual gearbox - Air conditioning - Cruise control - Radio CD with Bluetooth - LED daylight - Electrically adjustable and heated rear-view mirrors - Electric windows - Electric immobilizer - 3 seats - Driver's seat with armrest - Height and depth-adjustable steering wheel - On-board computer - Central locking with remote control Lodotu Ilpepfx Akyorn Body Aerial work platform KLUBB KL32 - Working height: 12,5m - Lateral outreach: 7.3m - Rotation: 360° - Basket loadable up to 120kg - Remote control - Motor start / stop function - Shelves for tools (can be extended as required) - 220V connection in the basket The hydraulic pump is driven by a 3 kW 12V electric motor Price stated in the offer as a basis for negotiation! 2 year manufacturer's warranty - Renault 3 new vehicles. Immediately available from our warehouse in Langenfeld/ Germany. - COC Document francais available, - Interior fittings, parquet floors and wooden walls, - On request we can change many things for you, according to your your business, - Free delivery to your home. We offer various aerial work platforms from 10m to 20m. If you have not found what you are looking for, you can send us your search request. Leasing rate from €750 per month plus VAT. This is a non-binding leasing offer from COMCO Leasing GmbH, subject to a final check. This offer is only valid for commercial customers based in Germany. We are also happy to advise you personally and individually, just contact us

Condition: excellent (used), Desoutter CVI II Controller with Angle Screwdriver Manufacturer: Georges Renault (Desoutter) Controller: CVI II Angle Screwdriver: 01C11200 CVI II Controller From simple start-up operations to complex sequence applications—with up to 20 phases and 250 cycles—for optimal speed, accuracy, and ease of use with every connection. The controller features various interfaces, including an Ethernet port, an RS232 port, 7 logic inputs, and 8 logic outputs (24 volts). The CVI II controller can operate an ER series handheld power tool or an EM series stationary screwdrive. It is important to note that the CVI II can also be used in combination with a sensor-controlled angle screwdriver such as the Desoutter ERA40J, which has a torque range of 8 to 40 Nm and a 3/8" drive. Storage Capacity Between 2,500 and 8,500 tightening results per station, depending on the number of cycles and operating mode (asynchronous or synchronous). Tightening Strategies – Torque and Angle Monitoring – Angle and Torque Monitoring – Torque and Angle Monitoring – Torque and Angle Rate – Prevailing Torque – Yield Strength – Stall Torque – Torque and Angle – Plastic Zone Detection – Additional Torque and Angle Sensors – Self-Tapping – Current Monitoring Connectable Tools: Angle Screwdrivers / Stick Screwdrivers / Pistol Screwdrivers / Stationary Screw Spindles Dimensions (L x W x H): 400 x 400 × 330 mm Weight: 30 kg Financing through our bank is also available. komplett-konzept.leasingo.de Find more items – new and used – in our shop! Lrsdpfx Akowxv Hkeyjn International shipping costs on request!

Year of construction: 2022, condition: used, For inquiries about the attachment, Mr. Herden will assist you (by phone). Westtech Woodcracker CL320 Felling Grapple / in stock & immediately available / Year of manufacture: 2022 / DEMO unit / like new Price: €8,890.00 net / €10,579.10 gross Lrodpfx Aoyix N Uskyen Cutting diameter softwood (mm): 400 Cutting diameter hardwood (mm): 320 Grapple opening = shear opening (mm): 1,060 Own weight (basic – fully equipped) (kg): 620 – 1,170 Recommended main circuit oil flow (l/min): 70 – 150 Recommended main circuit operating pressure (bar): 280 Recommended auxiliary circuit oil flow (l/min): 45 – 60 Recommended auxiliary circuit operating pressure (bar): 200 Carrier vehicle operating weight (t): 12 – 20 We have many adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and available immediately. Our warehouse holds a wide selection of various Westtech products, all immediately available! Mr. Herden will be happy to assist you (by phone). Upon request, we can also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete range of Westtech Woodcracker products! Errors and prior sale excepted! Internal ref. no.: 121059-F = More information = New: No Part suitable for: Application in forestry Please contact Marius Herden for further information.

Condition: not inspected (used), Year of construction: 1999, GRAM Cooling compressor. Maximum working pressure - 25bar. Working temperature, Max - 100grader. Working temperature, Min -10grader. Medium - REFRIG Scope - B. Lsdpfx Aehg Tpaskysrn Capacity - 7 Liter SCHORCH electric motor. Type - KN7250M-AB01B-Z. 110kW.

Condition: refurbished (used), DKV III Throughfeed Press with Brake Unit Refurbished Available either with original hydraulic motors or converted to servo motors Options: - Chain threading device - Traveling cross-cut saw Function: For pressing finger joints without stops (in continuous operation). The upper and lower plate chains provide feed force. Following brake plates transfer the required longitudinal press force to the wood via friction. Advantages: - High output despite relatively slow feed rates - Absolutely no vertical finger offset at the joints Technology: Heavy-duty 2" plate chain, pneumatically lift/lowerable Floating brake elements Lrjdpfx Asv T Aqyjkysn Pressing force measurement via contact manometer Height adjustment electric Maximum pressing force adjustable and dependent on feed speed and wood cross-section, 4500 daN at 32 m/min 2200 daN at 70 m/min Feed speed adjustable 10-70 m/min Drive power Feed unit adjustment 1 kW Brake adjustment 1 kW Hydraulic motors 45 kW Technical data: Wood width 90 - 180 mm Wood thickness 20 - 80 mm Thickness-width ratio 6:10 Wood cross-section for 15/16.5 mm fingers max. 90 cm²

Condition: used, Level limit switch, level measuring device, sensor, switch, level transmitter -Type: Nivotester FTL325N-F1E1 -Number: 6x available Lrjdpfx Akjd Tvuhjyon -Price: per piece -Weight: 140 g

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, power module, U/E module -Manufacturer: Siemens, servo controller Sinamics G110 CPM110 AIN -AC Drive: Type G110 CPM110 AIN 6SL3211-0AB17-5UA1 -Individual components: see photos -Number: 3x module available -Price: per piece Lrodpfxsnah Dks Akyon -Dimensions: 150/90/H140 mm -Weight: 0.9 kg/piece

Condition: good (used), Frequency converter, frequency inverter, drive converter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, converter, power module, U/E module -Manufacturer: Siemens, Sinamics servo controller -AC Drive: Type G110 CPM110 AIN 6SL3211-0AB15-5UA1 -Number: 2x module available -Price: per piece -Dimensions: 150/90/H140 mm Ledpfopvqyrex Akysrn -Weight: 0.9 kg/piece

Condition: good (used), pneumatic power clamps, horizontal clamps, compact clamps, clamping devices, pneumatic power clamps -Type: 82L32-143C8H0 -Quantity: 4 available -Price: per piece -Weight: 2.1 kg/piece Ljdpfxjb A H E Ie Akyjrn

Condition: used, Pneumatic rotary cylinder, swivel drive, pneumatic cylinder, air cylinder, swivel linear unit -Festo type: DSL-32-50-270-P-S2-CC-KF -Piston: Ø 32 mm Ledsd S Dahopfx Akyorn -Stroke: 50 mm -Swivel angle: 0 to 272° -Max. Pressure: 8 bar -Dimensions: 335/105/H105 mm -Weight: 3.7 kg

Condition: used, PLC control, supply unit, converter, power module, U/E module Lrjdjfivi Uepfx Akyen -Power module: Simatics Power Module 240 6SL3224-0BE23-0AA0 -Input: 3 AC 380 - 480 V 10.2 A 50/60 Hz -Output: 3 AC 7.7 A. -Power: 3 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 155/270/H235 mm -Weight: 4.6 kg

Condition: used, PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE21-5UA0 Lrsdpfx Akofivkboyon -Input: 3 AC 380 - 480 V 4.8 A 50/60 Hz -Output: 3 AC 4.1 A -Power: 1.5 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 230/75/H240 mm -Weight: 2.4 kg

Condition: used, PLC control, supply unit, converter, power module, U/E module -Power module: Simatics Power Module 240 6SL3224-0BE21-1UA0 -Input: 3 AC 380 - 480 V 3.8 A 50/60 Hz Lsdpfx Akofivkcsyorn -Output: 3 AC 3.1 A -Power: 1.1 kW -Control unit: Simatics Control Unit CU240S PN F 6SL3244-0BA21-1FA0 -Dimensions: 230/75/H240 mm -Weight: 2.4 kg

Condition: used, mileage: 95,862 km, power: 96 kW (130.52 HP), first registration: 11/2019, fuel type: diesel, color: white, gearing type: mechanical, Equipment: ABS, airbag, central locking, cruise control, immobilizer system, onboard computer, Special features - ABS - Radio - Airbag - On-board computer - Power steering - Cruise control - Driver’s seat with armrest - Electric windows - Electronic immobilizer - Central locking with remote control - Ladder rack - The vehicle is equipped with a new genuine particulate filter valued at €2,300. Superstructure Aerial Work Platform Time Versalift ETL-32-125 - Working height: 12.5 m - Lateral outreach: 7.3 m - Basket capacity up to 120 kg - Rotation: 360° - Remote control - Engine start/stop function - Electric emergency pump - Hour meter - Flashing beacons - 220V socket in the basket The vehicle is fitted with an aerial work platform (model Time Versalift ETL-32-125), mounted on a Renault Master. This telescopic platform is ideally suited for maintenance, installation, and inspection work at heights of up to approximately 12.5 m. An ideal vehicle for municipalities, utility companies, telecommunications, or trades businesses. All platform functions are operational and have been checked by our workshop. The vehicle is ready for registration. German papers, TÜV, and UVV are included free of charge. Additional features such as tow bar, lighting, shelving, and more are available on request. ACR-Juretzki Nutzfahrzeughandels GmbH – Your reliable partner for used commercial vehicles All vehicles offered by us are owned by ACR-Juretzki Nutzfahrzeughandels GmbH. All presentations are made exclusively with original photos taken in-house – guaranteeing full transparency regarding the actual condition of the vehicle. Our vehicles undergo extensive reconditioning in our own specialist workshop prior to sale – including mechanical, bodywork, and paintwork. Therefore, they are optimally prepared for the next technical inspection. In addition, we guarantee the authenticity of the stated mileage. Trust is good – verification is better: On request, the vehicle can be inspected by independent inspection organizations such as TÜV, DEKRA, or KÜS – including remote inspection. Our service offer for you: - Delivery of your vehicle to your desired location - Complete handling of export formalities, including export license plates - Custom financing and leasing options - Trade-in of your current vehicle - Installation of special equipment on request Looking for something specific? Ledpfx Akewz Ik Hsyern If you currently can’t find a suitable vehicle for your company in our inventory, contact us – we will be happy to assist you. For technical details, additional photos, or a personal consultation, we are always at your disposal. All stated prices are net prices. The contents of our website are created with the greatest care and updated regularly. Nevertheless, they are for general information only and do not replace individual advice. Only the information in the purchase contract is legally binding. Subject to changes, errors, typographical mistakes, and prior sale.