Used Containerised Water Heater for sale (10,502)

Condition: good (used), Oil water separator with pre-separation Tank volume (litres) 228.4 Iajdpsg Db R Asfx Ab Net Compressor capacity max m³/min 58,5 Condensate inlet connection 3 x G1/2, 1 x G1 Filling volume in l 158.8 Filter capacity in l 1 x 37.2 / 1 x 40.3

Condition: new, functionality: fully functional, fuel type: gas, Year of construction: 2026, Equipment: 4 in one shovel, Infrared Asphalt Heater MIRA-1 Infrared Asphalt Heater MIRA-1 by TICAB TM is compact and powerful device. Best for small patch repairs. It is quite reliable and highly effective in use SPECIFICATIONS: - Propane fuel. - Controls - mechanical. - 2 gas bottles. - Consumption - 5-5.5 kg / h (depending on the outside temperature). - Weight 120 kg. Effective in the repair of: • Potholes. Iedpfxoq Rcrqs Ab Nsat • Raising manhole and utility covers. • Failed pavement joints. • Joint asphalt repair.

Year of construction: 2022, condition: good (used), functionality: fully functional, Equipment: Isdpfxoyvzzbe Ab Njat ✔ Plastic spray nozzles ✔ Level protection with probe ✔ Programmable heating ✔ 5 bar pressure pump ✔ Oscillating spray pipes ✔ Fan ✔ Lift-up door ✔ Trolley with oil drip tray Useful volume: 1170 x 600 mm Max. load: approx. 750 kg Tank volume: max. 610 litres Power consumption: 25 kW – 40 A Cleaning pressure: 5.1 bar Pump capacity: 24 m³/h Sale exclusively to businesses, commercial traders, freelancers, and public institutions. Consumer goods purchase is excluded. The device is used and sold without any liability for material defects. Warranty, guarantee, returns, and exchanges are excluded from this sale. Exceptions apply to claims based on intentional or fraudulently concealed defects, as well as claims for damages relating to injury to life, body, or health, and in cases of gross negligence or intent.

Condition: not inspected (used), Year of construction: 2020, operating hours: 4,809 h, functionality: unexamined, operating pressure: 2,500 bar, overall weight: 2,030 kg, rotational speed (min.): 650 rpm, rotational speed (max.): 1,800 rpm, water tank capacity: 80 l, TECHNICAL DETAILS Working pressure: 600 - 2,500 bar Flow rate: 9 - 26 l/min Drive power: 160 kW / 132 kW motor Speed range: 650 - 1,800 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 2,240 x 1,550 x 1,780 mm Total weight: 2,030 kg Input voltage: 400 V Power connection: 400 V / 50 Hz Fuse protection: 250 A Operating pressure water inlet: 2.0 - 8.0 bar Max. inlet temperature: +40 °C Water tank capacity: 80 l Pump speed range: 220 - 610 rpm Engine oil capacity: 10 l Isdpfxsyx Uwue Ab Njat Noise level: 75 dB Operating hours: 4,809 h EQUIPMENT High-pressure pump with frequency converter (continuous operation 24 h/day) Standard accessories

Condition: ready for operation (used), Year of construction: 2021, Aermec ANL 202 Q Chilled Water Recooler Approximate dimensions: 1750mm x 750mm x 1450mm (W x D x H) Weight: approx. 450 kg Cooling capacity: 43.00 kW Year of manufacture: 2021 You are welcome to arrange a viewing appointment. We can also organize cost-effective shipping for you! You will receive a proper invoice. For international customers, a net invoice can be issued, provided you have a valid VAT ID. Subject to prior sale. Visit our shop to see our other offers as well. Isdpfxjywtpmj Ab Nsat All company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Please note that technical specifications may vary and errors in the item description cannot be ruled out and are subject to change.

Condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: AC, Aquamix 32 Water Mixing and Dosing Unit Fully automatic water mixing and dosing device with automatically controlled pre-running and numerical input Technical specifications: Temperature inlets: 3 (with ice water) Dosing range: 0.1 l – 999.9 l Temperature control range: +0.5°C to +70°C Temperature accuracy: +/-2°C Dosing accuracy from 1 l: +/-0.1 l Iajdpfx Absygdays Nst Water flow at 3 bar: up to 30 l/min Water connection: 3/4" external thread Power supply: 100 – 240V; 50Hz Dimensions (W x H x D): 300 x 300 x 170 mm Used device We have additional units in stock!

Condition: refurbished (used), Year of construction: 2017, functionality: fully functional, High pressure pump from PTV WJ3030B-1Z waterjet cutting machine. Iedpoyxmmzjfx Ab Njat Pump, reducer, main motor of 37 kW, flush valve are overhauled. H2O Jet intensifier 60K 301001-1-R.

Condition: used, Year of construction: 2005, operating hours: 45,000 h, machine/vehicle number: LC514, Used Bottling Line SIDEL for still water up to 12000 bph Main features of the bottling line The used SIDEL bottling line for still water up to 12000 bottles per hour delivers high standards of productivity and precision. Moreover, the system produces 12000 bottles per hour, making it suitable for medium high production capacities. The line processes PET containers, handling formats ranging from 0.33 L to 1.5 L. Additionally, this line applies a volumetric filling system, ensuring accurate dosing for each bottle. It supports containers with neck types between 25 and 29 mm, thereby improving compatibility with various market standards. Furthermore, the system exclusively processes still water, maintaining a specific and dedicated production flow.  Details of the equipment in the Used Bottling Line SIDEL for still water up to 12000 bph The Sidel SBO 8 blow molding machine, manufactured in 2005, forms the bottles at the core of the process. Notably, this machine transforms preforms into finished bottles using high pressure compressed air. Therefore, SIDEL technology ensures precise shaping and optimizes PET material usage, minimizing waste. Iodpevgva Uofx Ab Nsat Filling Monoblock The Sidel 36 36 9 filling monoblock, also from 2005, performs rinsing, filling, and capping in a single compact unit. This design maximizes space efficiency and reduces transfer times between stages. Consequently, the volumetric filling system delivers precise dosing, which ensures the final product quality. Labeling Machine The PE Labellers ROLLMATIC labeling machine, from 2005, applies wrap around labels to containers. Advanced technology positions labels accurately, thus enhancing the finished product appearance. This system works perfectly for PET water bottles, meeting the line speed and quality requirements. Shrink Wrapper The Sidel Cermex shrink wrapper, from 2005, performs secondary packaging. Specifically, the machine uses shrink film to create compact and secure packs. As a result, this process enhances logistics and product distribution while protecting items during transport. Conveyors in the Used Bottling Line SIDEL for still water up to 12000 bph The line operates with a complete system of conveyors, both air and ground. These conveyors maintain a continuous and uninterrupted flow between production stages. Additionally, the conveyors minimize downtime and ensure high operational efficiency. Technical advantages of the line This used bottling line delivers reliability and robustness, even with its 2005 manufacturing date. Moreover, all machines ensure a long operational life and reduce maintenance costs. The system efficiently bottles still water, ensuring a specific and contamination free process. Furthermore, SIDEL machinery integrates seamlessly with complementary components, such as the labeling machine and shrink wrapper, to maintain a uniform production flow. With a speed of 12000 bottles per hour, this line supports companies with consistent production demands. Conclusion The used SIDEL bottling line for still water up to 12000 bottles per hour provides a reliable and highly efficient solution for the bottling sector. Therefore, with robust machinery and an optimized configuration, it meets the needs of technicians and experts requiring a complete solution for producing PET water bottles.

Condition: used, Year of construction: 2023, functionality: fully functional, pressure: 1,000 bar, operating pressure: 1,000 bar, fuel: diesel, overall weight: 1,430 kg, rotational speed (min.): 1,800 rpm, rotational speed (max.): 1,800 rpm, temperature: 45 °C, power: 356 kW (484.02 HP), pump capacity: 196 l/min, water connection: 40 mm, We offer this used Woma 550Z high-pressure water jet, year of manufacture 2023. Perfect working condition. Selling without truck. Model: 550Z Order number: 2612301766 Serial number: 9.911-511.07/107.10 Transmission ratio: 4.60 Rotational speed: 1800 rpm Manufacture date: 07.2023 Mass: 1430 kg Max inlet temperature: 45 °C Port diameter: 40 mm Power: 356 kW Flow rate: 196 l/min Pressure: 1000 bar Iodpjywyg Ejfx Ab Neat If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, overall weight: 90 kg, total length: 4,900 mm, type of input current: AC, input voltage: 230 V, fuel: domestic gas H, input frequency: 50 Hz, gas tube heater Solaronics TU.E 23 more pieces in stock production year: 2020-22 heat output: 23kw gas burner + exhaust fan pipe length: 2x 4.9 meters G20.1 Nominal connection pressure: 25 mbar Nominal gas consumption: approx. 2.5 m3/h Gas connection: 1/2 " Connection voltage: Ijdpjq Hu Afefx Ab Njat IP21 AC 230V 50Hz

Condition: good (used), SANYO Water Heat Exchanger Model: SGP-WE170J2 Power source: 220-240 V AC, 1 phase, 50 Hz Maximum electrical power: 9 kW, 0.05 A (continuous operation) Device protection: IP24 Cooling capacity: 50 kW Heating power: 60 kW Heat input (HS) (cooling): 43.5 kW Heat input (HS) (heating): 46 kW Refrigerant: R407C Design pressure high pressure side: 30 bar Design pressure low pressure side: 16 bar If you need more information. We are here to help! Please contact us using the form or give us a call Isdsd Tlixspfx Ab Neat Your ad has been automatically translated. Translation errors are possible

Condition: used, Year of construction: 2006, machine/vehicle number: LC564, Used bottling line SIDEL for still water in PET bottles 25200 bph The used bottling line SIDEL for still water in PET bottles 25200 bph provides a complete solution for bottling still water. Currently, the line remains connected to power, so buyers can test it directly. SIDEL designed the system in 2006 to handle PET bottles ranging from 350 ml to 1.5 liters. As a result, the line maintains high productivity and flexibility. General line data This used bottling line SIDEL for still water in PET bottles 25200 bph processes up to 25200 bottles per hour. Specifically, it uses 30/25 neck-type bottles, which match standard formats across the industry. SIDEL equipped the line with a SB014 blow molder featuring 14 cavities. Furthermore, the filling and capping monoblock includes 40 filling valves and 10 capping heads, making it suitable for still products. Main installed machines The line includes, among other components, an AF high-pressure compressor (model CE46A) and a Fusheng low-pressure compressor (model SA110A). In addition, a BAC cooling tower manages process temperatures effectively. The SIDEL SB014 blow molder, which includes a hopper, feeder, and dust remover, connects directly to the SIDEL SFGL40/10 filling machine. Consequently, the line maintains efficiency across all stages. Labeling and packaging SIDEL integrated a Rollquattro labeler that applies roll-fed wraparound labels with precision. Moreover, a shrink-wrapper creates stable multi-pack bundles using plastic film. The VANTA WSD-B350 carton packer, built in 2011, handles up to 35 cartons per minute. Likewise, a palletizer automates the end-of-line phase, thereby preparing products for shipment. Conveying system and internal logistics The conveying system uses SIDEL-built conveyors throughout the process. Accordingly, the line ensures uninterrupted flow from the blow molder to the palletizer. Thanks to this automation, the system reduces manual intervention and improves consistency. In contrast to fragmented setups, this configuration enhances operational control and reduces downtime. Operating conditions and advantages This used bottling line SIDEL for still water in PET bottles 25200 bph operates under power and remains available for on-site testing. In practice, the integration of SIDEL machines improves performance while simplifying maintenance. As such, operators can rely on uniform quality and long-term reliability. Applications and compatibility Iaodpfxjw Ahfyj Ab Net The line suits facilities bottling still water in PET containers of multiple sizes. Importantly, its modular design enables quick format changes with minimal disruption. Because of this, companies can adapt to different production requirements. Notably, the system supports both small batches and high-volume output. T...

Year of construction: 2017, condition: used, New: Yes Height: 235 cm Cargo space capacity: 4.450 l Tyre size on axle 1: 560/60r22.5 Tyre size on axle rear: 560/60r22.5 Iajdpfx Ajytd Dfjb Nst

Year of construction: 2010, operating hours: 1,480 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 1873076, We are offering this very well-maintained Uhde high-pressure pump for waterjet, HPS 4022, year of manufacture 2010. Manufacturer: Uhde High-Pressure Pump for Waterjet Model: HPS 4022 Year of Manufacture: 2010 Condition: Very good Category ID: 34 Machine Type: Uhde HPS Waterjet High-Pressure Pump If you have any questions or require further information, please feel free to send us a message or give us a call. Iodpsygmhtofx Ab Neat

Condition: used, Year of construction: 2018, operating hours: 806 h, functionality: fully functional, total width: 2,030 mm, total length: 4,450 mm, total height: 2,090 mm, pressure: 3,000 bar, operating pressure: 3,000 bar, fuel: diesel, overall weight: 2,925 kg, water tank capacity: 150 l, volume flow: 1.08 m³/h, fuel tank capacity: 200 l, type of cooling: air, noise level: 85 dB, power: 144 kW (195.79 HP), year of last overhaul: 2026, pump capacity: 18 l/min, Equipment: rotational speed infinitely variable, type plate available, Complete unit in mobile design with soundproof enclosure + accessories, consisting of: (€7,500) 5x hose DN8-20m-3010bar-2x9/16-LH-S 6x complete connector set 9/16 4000 BAR 1x hose DN8-10m-3010bar-2x9/16-LH 1x hose DN5-5m-3010bar-9/16UNF-LH 1x compressed air line DIN10, 20m 1x high-pressure gun HP3000S-E-24V incl. body support and DSA 1x Speedy 3000 1x Orbimaster 2500 0.80-9/16-18UNF LH 1x rotary union TD3000-SCS-9/16 1x plug-in foot switch, 2-channel, 24VDC Iedpfex Svnbsx Ab Nsat 2x cable drum with cable, 50m 2x bursting disc, operating pressure 3000bar 10x filter cartridge 1µm various nozzles

Condition: good (used), Year of manufacture 2008, 3,160 operating hours, newly serviced, very well maintained, NEW HD pump by FALCH Iaedpjwy Ellsfx Ab Not

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW XDNC 2.01 software controller with full instructions. Iedpeh Txlcefx Ab Nsat Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: new, Year of construction: 2026, Brand new system from one of the world's largest manufacturers, Dardi International / Flying Bridge design, 4x2 m cutting area, 2-D, linear guides with ball screws on all three axes, Yaskawa motors with controllers. Delivery time approx. 6-8 weeks, directly available in our showroom in Elsenfeld with the following configuration: Many machines of the same type can be inspected in advance in Benelux, Switzerland, Germany, etc. Please contact us. Iaedsx Ig Siopfx Ab Njt -- Other sizes available on request ---- Machine - 2x4m cutting area with stainless steel tank and wave-shaped steel supports, individually replaceable - ESA PC control WIN 11 - IGEMS 2-D CAD/CAM programming system incl. automatic nesting to minimize material waste - 1 cutting head, 2-D version - Handwheel - High-pressure supply via rotating joint - Automatic central lubrication - High-pressure supply via base profile and shut-off valve - Allfi® abrasive feed system 1.3 tons, fully automatic - Allfi® abrasive dosing system 2.0, pneumatic-free and continuously adjustable - KEYENCE light barriers for CE compliance - IGEMS and operator training as well as on-site installation available at extra cost Price ex works Elsenfeld. We are the European distributor for Dardi International with 27 years of experience in high-pressure waterjet systems. At extra cost: - BFT Ecotron 40.37+ high pressure pump - Aqualon High Pressure Pump AQRO S50c 37 KW / 3.8 l/min Optional manual swivel head available at extra cost – see pictures.

Year of construction: 2022, operating hours: 50 h, condition: excellent (used), functionality: fully functional, input voltage: 230 V, input frequency: 50 Hz, DGUV certified until: 04/2027, type of input current: AC, Chilled Water System Langheinz L 130 High peak cooling performance with ice bank stainless steel construction TOP technology 220V connection Iasdpfxsxmq Tlj Ab Net Used device with warranty Option: Maintenance contract delivery service commissioning & operator training More bakery machines in stock!

Year of construction: 2007, condition: ready for operation (used), Cutting dimensions X/Y: 2000mm/3000mm, Z-axis stroke: 230mm, machine tolerance: +/-0.05mm/m, repeatability: +/-0.025mm/m, simultaneous movement: 56m/min, max. cutting speed: 30m/min, max. material thickness: 200mm, max. load capacity: 790kg/m², max. workpiece weight: 4740mm, max. clamping material thickness: 50mm, max. pump pressure: 3800bar, max. working pressure: 3600bar, machine weight: approx. 11300kg, working hours: 18111h. Documentation available. An on-site inspection is possible. Iasdpfxeyttwuj Ab Nst

Condition: used, machine/vehicle number: LC594, Technical Specifications & Performance Data This complete PET bottling line is engineered for carbonated water and soft drinks, delivering consistent output and reliable quality for beverage production. It combines high-efficiency blowing, isobaric filling, labeling, packaging, and end-of-line automation into a cohesive used bottling line suitable for second hand industrial packaging operations. Production speed: 13,000–14,000 bottles per hour Containers: PET bottles, neck finish 28 1881 Blow molder: Sidel SBO10, 10 cavities Preform handling: Sidel EBH 2050 preform hopper Air conveyor: Sidel-Alsim Rinser/Filler/Capper monoblock: Sidel-Alsim PET Trybloc Asmojet 1T RV-P 48/60/10K Rinser: 48 clamps, 1 water treatment Filler: 60 isobaric valves Capper: 10 heads Premix/Mixer: Sidel-Alsim, 30 m³/h output Bottle dryer: ACI Labeling machine: Krones Contiroll, rotary, 15 dishes, PET wrap-around, roll-fed Shrink wrapper: Acmi Fenix, film-only configuration Iaedpfxeydn A Hs Ab Nst Handle applicator: Smipack HA 35-50-70 Palletizer: Alsim Valiant 1I 1P, fully automatic, push-type Pallet wrapper: PM Pragometal OBS Rotomatic Standard Advanced Automation & Control Systems The line integrates component HMIs and automatic control features at each station to streamline operation and changeovers. The isobaric filling block ensures precise filling for carbonated beverages, while the roll-fed rotary labeling system supports continuous, high-speed label application. Quick-change mechanical adjustments and format components help maintain uptime and reduce setup times in beverage production environments. Production Line Integration Capabilities Designed for inline operation from preform loading through palletizing, the system features smooth bottle transfer via air conveyors and synchronized starwheels in the filling monoblock. It integrates upstream blowing with downstream labeling, shrink wrapping, handle application, and palletizing, creating a complete packaging machinery solution. The line is suitable for carbonated water and soft drinks and supports multiple PET bottle formats and heights associated with the 28 1881 neck finish. Machine Condition & Maintenance History This second hand line is available for sale and is presented in ready-for-operation condition. Component years range from 1996 to 2019, reflecting a well-curated selection of bottling equipment. Buyers can arrange inspection to assess performance, equipment condition, and overall line integration prior to deployment in beverage production. Operational Performance & Versatility Optimized for carbonated products, the isobaric filler provides accurate CO₂ retention and foam control. The Sidel blow molder delivers stable bottle quality, while the Krones Contiroll rotary labeler ensures precise PET wrap-around label application at the stated throughput. Downstream packaging includes film-only shrink wrapping and automated handle application for multipacks, with automated palletizing and pallet wra...

Condition: used, Year of construction: 2000, machine/vehicle number: LC574, Technical Specifications & Performance Data This used bottling line is a complete isobaric PET solution engineered for high-volume beverage production of still water, sparkling water, and carbonated soft drinks. Built around robust Krones and Simonazzi process equipment with a Sidel SBO14 S2 blow molder, it offers dependable industrial packaging performance with consistent product quality. Line type: Used isobaric PET complete bottling line (second hand) Nominal speed: up to 18,000 bottles/hour (configured for 2.0 L PET; format-dependent) Bottle formats: 0.10 L and 2.0 L; additional formats possible with change parts Container type: PET (air-conveyed handling) Product range: Water (still and sparkling), CSD Core technology: Isobaric rinsing/filling/capping monoblock with downstream labeling and end-of-line packaging Line composition: Approx. 14 integrated machines including blow molder, air conveyors, rinser, isobaric filler, capper, labeler, packer/shrink wrapper, palletizer, stretch wrapper, inspection and coding modules Main manufacturers: Krones, Simonazzi; blow molder: Sidel SBO14 S2 Years: Main line 2000; blow molder 1999 Condition: Ready for operation; safety features included Advanced Automation & Control Systems Centralized PLC/HMI control coordinates blow molding, rinsing, isobaric filling, capping, labeling, and end-of-line functions. Recipe management supports format and product changeovers, with synchronized conveyors and VFD-driven motors to maintain constant flow at high speed. Line accumulation and defective-bottle rejection are integrated to minimize downtime and scrap. Automation level: Fully integrated, recipe-based operation Operator interface: Intuitive HMI with alarm diagnostics and production reporting Electrical: Industrial 3-phase supply (typical 400–460 V, 50/60 Hz; to be confirmed on inspection) Safety: Interlocked guards, emergency stop network, and category-rated safety circuits Production Line Integration Capabilities Designed for seamless integration across the packaging hall, the line interfaces upstream with preform handling and syrup room/premix systems and downstream with packers, palletizers, and warehouse logistics. Fast format change procedures and clearly defined change parts enable efficient switching between bottle sizes and product SKUs. Compatible with standard beverage production utilities (CIP, CO₂, chilled water) Interfaces available for inspection systems, laser/inkjet coding, and vision verification Modular conveyors allow adaptation to plant layouts and future upgrades Machine Condition & Maintenance History This second hand complete bottling line is in ready-for-operation condition with safety protections installed. The equipment has been maintained in a production environment and inspected for functional performance. Maintenance records, documentation, and layout drawings can be made available for review during a technical visit. Isdpfxew D E Ubo Ab Noat Operational Performance & Versatil...

Condition: excellent (used), mileage: 100 km, first registration: 07/2007, fuel type: diesel, fuel: diesel, Year of construction: 2007, Technical condition: good Visual condition: very good Iasdpfsyntpysx Ab Not Contact Andre, Henri or Andre for further information.

Condition: used, Power source for orbital welding machine MESSER GRIESHEIM - POLYSOUDE PS204 Water cooling unit for orbital welding machine MESSER GRIESHEIM - POLYSOUDE RC200 Iasdpot Awm Dsfx Ab Not Welding power source, inverter welding machine POLYSOUDE PS 204 + RC 200 Year of manufacture: 1997 Power source serial no.: 9885186 Cooling unit serial no.: 97861? Output: 200 amps = 20% duty cycle 90 amps = 100% duty cycle Power supply: 230 volts, 50 Hz, Schuko plug - Remote control cable type BP 1436 with 7.5 m connection cable - Adjustable output from 1 to 200 amps - DC only - HF ignition - Cooling water unit for torch cooling - 44,895 operating hours (read) - Operating and maintenance manual included Space requirements welding machine (L x W x H): 550 x 360 x 500 mm Space requirements cooling unit (L x W x H): 550 x 360 x 550 mm Weight welding machine: 45 kg Weight cooling unit: 25 kg Good condition Sold without accessories The price refers to a set consisting of 1x power source and 1x water cooler.

Condition: new, power: 316 kW (429.64 HP), fuel type: diesel, tire size: 315/80R22.5, axle configuration: 6x4, wheelbase: 4,500 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro3, suspension: steel, Year of construction: 2024, Equipment: air conditioning, = Further options and accessories = Isdpfxsymnzzj Ab Noat - Leaf suspension = Notes = Fuel tank: 290 ltr. Air conditioning Equipped with water tank 10,500 ltr Container frame water tank on twistlocks, 20 ft Tank year of manufacture: 1999 Side-mounted engine enclosed in box Dual manhole covers on top for easy access Two rear ladders: one chassis-mounted and one container-mounted Support legs for freestanding water tank container = Further information = Transmission: ZF16TX2240TO, automatic Year of manufacture: 2024 Tyre size: 315/80R22.5 Suspension: leaf suspension Front axle: steered Gross vehicle weight: 33,500 kg