Used Continous Form Collator for sale (6,744)

Condition: used, machine/vehicle number: 007818, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Corner Rounding Unit: yes Ibedpfowu Ab Tjx An Ioc Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3000 mm Max feed speed: 40 m/min Operating Units Right Side: 12 nr Operating Units Left Side: 12 nr

Condition: excellent (used), Year of construction: 2017, machine/vehicle number: S/N 320.09.003.17,, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 4,150 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of slots in tool magazine: 8, controller manufacturer: WoodFlash 4.1, total height: 2,510 mm, total length: 11,848 mm, total width: 4,850 mm, overall weight: 4,500 kg, table length: 3,200 mm, table width: 2,100 mm, controller model: H10 CNC Control, Windows 10, feed length X-axis: 4,150 mm, feed length Y-axis: 2,560 mm, feed length Z-axis: 280 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, spindle motor power: 10,000 W, nominal power (apparent): 28 kVA, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, spindle speed (max.): 24,000 rpm, table height: 895 mm, Equipment: documentation/manual, CNC Machining Center 3-Axis CNC Router Format 4 Profit H10 2232 S/N 320.09.003.17 Year of manufacture: 2017 Tool holder: HSK63F Axis travel: X-axis = approx. 4,050 mm, Y-axis = approx. 2,560 mm, Z-axis = approx. 280 mm, Including 2 vacuum pumps Becker VTLF2.250/0-79, Year of manufacture: 2017 Including loading table and discharge conveyor 8-position tool changer Working area approx. 2,800 x 2,060 mm Ibjdpfx Anoxy Abhs Ioc Slot saw unit for X and Y directions Horizontal drilling in X and Y, two spindles each, drilling unit DH 16, Vertical drilling: 5x in Y direction, 7x in X direction, main spindle approx. 10 kW X-axis speed approx. 100 m/min, Y-axis speed approx. 100 m/min, Z-axis speed approx. 30 m/min

Condition: excellent (used), Year of construction: 2022, machine/vehicle number: S/N 320.01.001.22, functionality: fully functional, input voltage: 400 V, travel distance X-axis: 4,150 mm, travel distance Y-axis: 2,560 mm, travel distance Z-axis: 280 mm, workpiece length (max.): 3,120 mm, workpiece width (max.): 2,160 mm, workpiece height (max.): 105 mm, number of slots in tool magazine: 8, controller manufacturer: WoodFlash 4.1, total height: 2,510 mm, total length: 11,848 mm, total width: 4,850 mm, overall weight: 4,500 kg, table length: 3,200 mm, table width: 2,100 mm, controller model: H10 CNC Control, Windows 10, feed length X-axis: 4,150 mm, feed length Y-axis: 2,560 mm, feed length Z-axis: 280 mm, feed rate X-axis: 25 m/min, feed rate Y-axis: 25 m/min, feed rate Z-axis: 15 m/min, spindle motor power: 10,000 W, nominal power (apparent): 35 kVA, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 100 m/min, rapid traverse Y-axis: 100 m/min, spindle speed (max.): 24,000 rpm, table height: 895 mm, CNC Machining Center / 3-Axis CNC Router Format 4 Profit H102232 S/N 320.01.001.22, year of manufacture 2022, with control system, HSK63 tool holder, Axis travel: X-axis = approx. 4,050 mm, Y-axis = approx. 2,560 mm, Z-axis = approx. 280 mm, including 2 Becker VTLF2.250/0-79 vacuum pumps, year of manufacture 2021, including loading table, discharge conveyor, 8-position tool changer, working area approx. 2,800 x 2,060 mm, groove saw unit in X and Y direction, horizontal drilling in X and Y direction, two spindles each, DH 16 drilling unit, Ijdpsxy Abuofx An Isbc vertical drilling: 5x in Y direction and 7x in X direction, main spindle approx. 10 kW, X-axis speed approx. 100 m/min, Y-axis speed approx. 100 m/min, Z-axis speed approx. 30 m/min.

Condition: good (used), Direct from catering butchers which closed recently. Commercial model with extended hopper and extended outfeed conveyor. Complete with paper interleaver and auto wipe function (needs compressed air for this function). Ibsdpfxjt I E T Ao An Ioc

Condition: new, Year of construction: 2026, overall weight: 70 kg, inner dimension length: 1,200 mm, inner dimension width: 800 mm, inner dimension height: 800 mm, load capacity: 1,500 kg, total length: 1,240 mm, total width: 835 mm, Hello Iedoupurkopfx An Isbc I sell new Gitterbox containers with A5 format pockets Weight 70kg Load capacity 1000kg Stacking 1 + 3 pcs. Ral 7030 gray-stone Dimensions 1240X835X970 height. Price 125 eur/net/piece. Sale only on VAT invoice

Condition: good (used), Impact protection, crash protection, shelf protection, column protection, column impact protection, shelf impact protection, corner crash protection -Impact protection: Shelf impact protection, corner bumper protection -Type: L-shape -Height: 400 mm -Quantity: 5 pieces available -Price: per piece/ 95€ for the whole set. -Dimensions: 310/150/H400 mm Ibjdpfjvrdk Ssx An Ioc -Weight: 6.6 kg/piece

Year of construction: 1985, condition: reconditioned (used), REFORM Type AR 10, Type 40H Face grinding machine Year of manufacture: 1985 30 kW grinding motor Modicon control system Ibodpfx Ansd E Np Ej Iec Magnetic control, 6 stages Magnetic size: 1000 mm x 300 mm Segment head diameter: 460 mm Segment dimensions: 90 x 38 x 180 mm Number of segments: 1 set = 8 pieces Grinding motor feed: 0.01 mm - 0.1 mm, continuously adjustable Hydraulic oscillating drive New power cables between machine and control cabinet

Condition: new, Year of construction: 2025, curl forming machine 2,05m New! Ijdpfocg Tn Nex An Iobc Direct from the manufacturer! Width: 2050 mm Max. Sheet thickness: 0.65 mm for Rm 400 MPa Shaft diameter: 16 mm Pipe diameter 31.8 / 3.6 Weight: 15 kg We are looking forward to your contact!

Condition: used, Hand lever shears, hand tin snips, tin snips, sheet metal snips Ibedpfechlyfsx An Ijc -Scissors: 100 x 5 mm -Dimensions: 280/100/H980 mm -Weight: 10 kg

Year of construction: 1995, condition: good (used), machine/vehicle number: 2103, 2 Colours Iodpfjfuwmqox An Ijbc Quick Action Clamps Water Dampening Colour Rollers Water Rollers

Condition: refurbished (used), ROLLFORMING MACHINE PRODUCING SQUARE PROFILES WITH 5 TONES OF TOOLS MADE IN ITALY Iedpfx Ajfgl Aqsn Iobc

Condition: good (used), Used stainless steel container / transport container / IBC Last use: Chemicals Tank cleaned and with hazardous materials approval until 10/22 Item number: 10495 Volume: 500 liters Type: Standing in galvanized stacking frame Material (in contact with the medium): 1.4301 / AISI304 Design: Single-walled Bottom: Curved Top: Curved Operating pressure according to nameplate: +0.1 bar Container dimensions: Overall width: 1200 mm Overall length: 1000 mm Overall height: 1000 mm Materials: Inside: 1.4301 / AISI 304 Exterior parts: Galvanized steel Equipment: Nameplate: Yes Outlet diameter: approx. 70 mm Outlet type: Ball valve Outlet valve: Yes Manhole cover 400 mm with clamping ring Iodpfx Ansflrhqe Isbc

Condition: good (used), Transformer, converter, three-phase autotransformer, three-phase transformer Ibodokzpmujpfx An Ioc -Manufacturer: Trasfor, transformer Trafo 1 PH Snl from CNC milling machine Mikron WF 51C/155 -Type: TNM1m2k5/E -Technical data: see photo of the nameplate -Dimensions: 180/160/H215 mm -Weight: 25.5 kg

Condition: used, Single-column hydraulic press, DUNKES Type HZT 2.5 Machine No. H94-2558, Year of manufacture 1994 Clamping force 2.5 tons Overhang 180 mm Table surface 420 x 300 mm Through-hole in the table 60 x 185 mm Ram surface Ø 40 mm Dowel hole for clamping Ø 20 mm Ram stroke 160 mm Maximum installation height 250 mm Rapid traverse downward 65 mm/sec Rapid traverse upward 160 mm/sec Working speed 8.3 mm/sec Isdpfx Aoh Uhqysn Isbc Table height above floor 950 mm Hydraulic operating pressure 135 bar Hydraulic tank capacity approx. 100 liters Drive power 1.5 kW Power connection 400 volts, 50 Hz - Installation height can be increased by shortening the piston rod by 80 mm - Pressure and stroke limitation - 2-hand operation on the machine - Stroke counter - Safe press control with 2 monitored hydraulic valves - UVV 11.064 VGB 7.n.5.2 (for manual insertion operations) - 32047 operating hours recorded - Electrical wiring diagram and hydraulic diagram available Space requirement L x W x H 1100 x 980 x 1950 mm Weight 700 kg Very good condition

Condition: good (used), Year of construction: 1971, with magnetic table Ibedpfx Anomccvaj Iec max. grinding length 2500 mm a frequency converter was retrofitted for infinitely variable speed of the grinding motor also a paper filter was retrofitted for filtering the cooling water

Year of construction: 2000, condition: used, turning diameter 530 mm turning length 1500 mm control Fagor Ijdpfx Aneiu A Daj Iobc centre height 260 mm swing diameter 475 mm swing diameter over flat guideway 530 mm swing diameter over bed slide 315 mm bed width 350 mm spindle bore 80 mm spindle taper innen MK5 turning speeds 2 turning speed range 0-650/650-2500 U/min feed range 0 - 7000 mm/min rapid traverse 10 m/min diameter of quill 72 mm quill travel 180 mm weight of the machine ca. ca. 3,5 t dimensions of the machine ca. L/B/H 3,50x1,50x180 m

Condition: used, Year of construction: 1994, workpiece diameter 110 mm grinding length 410 mm Isdpfx Aot Hw Nmsn Ijbc clamping length 20 mm total power requirement 0,25 kW weight of the machine ca. 500 kg dimensions of the machine ca. m Profile Tool Grinder for Chamfer Angles, accessories

Condition: new, Year of construction: 2026, power: 300 kW (407.89 HP), Ball Mill for Mining & Fine Powder Making: A ball mill is a fundamental grinding device widely used in mining, metallurgy, cement, and chemical industries. It is designed to grind ores and other materials into fine powder through impact and attrition between steel balls and the material inside a rotating cylindrical shell. In mining plants, ball mills are essential for ore beneficiation, while in powder-making industries, they ensure uniform particle size and high surface area for further processing. Working Principle The ball mill operates on the principle of impact and friction. As the cylindrical shell rotates around its horizontal axis, the grinding media—usually steel or ceramic balls—are lifted along the inner wall by centrifugal force and friction. When they reach a certain height, they fall freely, striking and grinding the material below. This repeated motion breaks down the material into fine particles. The process can be carried out in dry or wet conditions depending on the application. Structural Composition Ijdoq Ngafepfx An Ijbc A standard ball mill consists of several main components: Feeding part: Ensures uniform material input through a feeder or screw conveyor. Discharging part: Can be grate type or overflow type, depending on the discharge method. Rotating part: The cylindrical shell made of steel plates, lined with wear-resistant liners. Transmission system: Includes motor, reducer, small transmission gear, and electrical control. Grinding media: Steel or ceramic balls of various diameters for efficient grinding. The internal liner design and ball size distribution are optimized to achieve maximum grinding efficiency and minimal energy consumption. Technical Details/Typical Specifications: Feeding size: ≤25 mm Discharge size: 0.074–0.4 mm Capacity: 0.65–615 t/h (depending on model and material hardness) Cylinder speed: 18–38 r/min Power: 18.5–4500 kW Liner material: High manganese steel, rubber, or alloy steel Grinding media load: 30–45% of cylinder volume Operating Modes: Dry grinding: Used for materials that must remain moisture-free, such as cement clinker, limestone, and quartz. Wet grinding: Common in ore beneficiation, where water or slurry improves grinding efficiency and particle uniformity. Application in Mining and Powder Production In mining operations, ball mills are used after crushing to further reduce ore size and liberate valuable minerals. They are integrated into grinding circuits with classifiers, hydrocyclones, and flotation systems. The ground material is classified by size, and oversized particles are returned to the mill for regrinding. This closed-circuit system ensures consistent product fineness and efficient energy use. In fine powder production, ball mills are used to produce materials such as silicate, ceramic powder, refractory materials, and chemical raw materials. The uniform particle size achieved by ball milling enhances product quality and performance in downstream applications. Conclusion A ball mill is an indispensable piece of equipment for both mining and fine powder making. Its ability to grind materials into fine, uniform particles makes it vital for ore beneficiation and industrial powder production. With flexible configurations, high efficiency, and reliable operation, modern ball mills provide a cost-effective and energy-efficient solution for large-scale grinding, ensuring consistent quality and productivity across diverse applications.

Condition: good (used), Year of construction: 2002, Industrial robot Manufacturer: Kuka Type: KR30-2 (older model) Year of manufacture: 2002 Reach: 2000 mm Weight: 880 kg Payload: 30 kg Kuka KRC2 controller Weight 185 kg Processor 733MHz Operating system: Win95 Software version: V4.1.7 Isdpjq Rd N Rofx An Iobc Kuka teach pendant KCP2 Kuka connection cables 51026ä

Condition: good (used), 400mm wide screw feed former with recent control screen upgrade by GEA. Has been used for production of vegetarian products. Can be supplied with other machines to make a complete coating and frying line. Iedpfx Aog E S H Rsn Ijbc

Year of construction: 2025, condition: new, KDT-03 Trimming Machine 380V Ibedpofwmvhsfx An Iec Grooving machine – 380V powered electric grooving machine, equipped with a foot pedal with an emergency switch, has a retractable lower shaft. Includes 6 sets stones shown in the picture. Easy and convenient machine operation. Technical specifications Range of processed sheet metal: 1.2 mm Roller diameter: 62mm Dimensions length height: 900x450x1350 (mm) Weight: 135kg

Condition: new, Year of construction: 2025, Mechanical sheet metal guillotine METFORMER HCO-2x2000mm The guillotine is made entirely of steel, the structure is solid and heavy. Simple design with good looks. It is easy to use. This guillotine is widely used for cutting thin and medium steel sheets in light engineering, hardware manufacturing. The blade is made of a super strong steel alloy. Ijdpfxofwmydo An Iobc Technical data: Model, HCO-2x2000, Engine power, kw, 3.0, Maximum sheet thickness (mm), mm, 2, Number of knife changes, pcs, 4, Length, mm, 2800, Width, mm, 1260, Height, mm, 1300, Weight, kg, 1350,

Condition: new, Year of construction: 2025, MDPE-1 SPOT WELDER portable 1 kVA High-performance transformer 2 levels of power regulation Electronic current and time control Possibility to work with 230V power supply The range of welded sheets: to 1 + 1 mm Iodpfsf Eyvvsx An Ijbc Width: 110mm Length: 460mm Height: 300mm Weight: 12,5kg Power supply: 230V

Condition: new, Hamburger forming machine, Sind, NEW Capacity: 1000 pieces / hour Hamburger forming diameter: 90 mm to 120 mm Ibodohx Nmgepfx An Iec

Year of construction: 2005, condition: excellent (used), machine/vehicle number: 3.65-00001, WITH COUNTING STATION Isdepr Ut Nopfx An Iobc Wiring Diagram No.: 8.62-00001 Equipment / Additional information: Consists of: -Infeed conveyor -Machine -Counting station -Discharge belt