Used Cv Instruments Hardness Testing Device, Hardness Tester for sale (22,143)

Condition: used, Chroma Type: ATE 17020 The Chroma 17020 is a highly professional, modular test system for lithium-ion & other battery pack qualification. Particularly strong in: - Lifetime testing, BMS verification, and validation of complex charging cycles - High energy recovery – up to 85% efficiency - Flexible expansion through numerous channels or higher current ranges - Enterprise deployment with extensive safety features & data persistence Technical data – Chroma ATE 17020 PTS Feature Specification Model: Chroma ATE 17020 PTS System type: Regenerative battery pack test system (charge/discharge test) Channel output: 600 W to 60 kW (modular and scalable) Total output: Up to 600 kW (depending on configuration) Ijdswwrxaopfx Ab Njat Voltage range: 20 V / 60 V / 100 V / 200 V / 500 V Current per channel: Depending on module: from a few amps up to >300 A per channel Parallel operation: Yes, for higher current up to 2,600 A Current and voltage accuracy: ±(0.05% of reading + 0.05% of range) Power accuracy: ±0.1% Transition time (charge/discharge): < 50 ms Sampling rate (measured data): up to 50 kHz (with BatteryPro) Data logging: Cyclic, 10 μs – 1 s / memory for 60 min power failure Test modes: CC, CV, CP, CC-CV, DCIR, pulse, drive cycle, dynamic profiles Number of channels: Up to 60 channels (expandable) Communication: CAN, S-Bus, Ethernet, USB Software: Chroma BatteryPro (test programming, real-time monitoring) Protection functions: OVP, UVP, OCP, UCP, OTP, reverse polarity, wire loss, delta V/I, etc. Energy recovery: Yes – up to 85% energy efficiency, grid-friendly (THD < 5%) Cooling: Fan cooling, low waste heat due to energy recuperation Temperature monitoring: Optionally integrable, range 0–90°C ±2°C Dimensions & weight: Depending on configuration (e.g. 19″ rack, approx. 300 kg) Mains connection: 3-phase, 400 V AC (depending on model) Applications: E-mobility, battery development, quality assurance, cell research Weight: approx. 455 kg Condition: used Scope of delivery: (See picture) (Specifications and technical data are subject to change and errors excepted!) If you have further questions, we are happy to assist you by phone.

Condition: excellent (used), TA-Instruments Iaedpfshukh Nsx Ab Njt Type: TMA Q400 TMA Thermomechanical Analyzer Performance: Temperature range (max.) -150 to 1,000 ˚C Temperature accuracy ± 1 ˚C Furnace cooling time (air cooling)

Condition: excellent (used), Oxford Instruments Here we offer you an INCAx-act Analytical Drift Detector. Microanalysis of elements including boron and above Operating temperature Normal mode 10-25 degrees Operating temperature extended mode 10-30 degrees Storage temperature -25 to 40 degrees and 8 to 80% humidity non-condensing Operating humidity Iasdpfx Aohx Nchjb Not

Condition: used, Tank capacity (litres) 100 Motorized pumps Up to 2 external each tank Iaedjvpfhyopfx Ab Not Dosing capacity Max. 50 cc/sec. per pump Remote technical support

Condition: used, functionality: fully functional, Amatek Inc. AC Power Source, REV.A, 7000 486 2, 5001iX 400 411 413 Model: 70004862 Type: 5001iX400411413 Condition: Used Technical data: 400-480V AC 50-60Hz 8000VA General information: Iaodpfx Absw D Dtpj Nst Output power: 5000 VA AC (output) Output voltage: 0–150 VAC / 0–300 VAC (switchable) Output frequency: 16–1000 Hz (frequency generator function) Phases: 3 Interfaces: LAN, USB, RS-232, GPIB (IEEE-488) Control: Front panel with LCD, rotary knob, keypad AC/DC power source and high-performance power analyzer

Condition: good (used), functionality: fully functional, MKS Instruments. Inc. RF Generator 13.56MHz, 10.5kW, QL10513, SurePower Model: QL10513 Type: SurePower Isdpfx Aeuyi Uijb Nsat

Condition: good (used), functionality: fully functional, MKS Instruments. Inc. plasma generator, AX7670 60 R, ASTRONi Model: AX767060R Iaedpfxouyi U Ae Ab Njt Type: ASTRONi 200-208V AC 50/60Hz 30A

Condition: good (used), Various measurement cards & racks from NI available, see listing: To be sold completely or in parts Photos are exemplary NI PXI-1045 189105K-01L 2 units NI PXI-2569 100 SPST Relay Module NI PXI-6528 Isolated Digital I/O NI PXI-4072 6 1/2 digit FlexDMM NI PXI-2532 512-Crosspoint Matrix 2 units NI PXI-6251 M Series Multifunction DAQ NI PXI-8331 MXI-4 2 units Iedpfjwpgy Aex Ab Njat NI PXI-6232 M Series Multifunction DAQ 10 units NI PXI-1031 90871D-01 Rev1.1 NI PXI-8196 Embedded Contr 191435B-712 without Expresscard NI PXI-6229 M Series Multif DAQ 191332B-11 191334A-11 NI PCI-6527 185681D-01 NI PCI-GPIB IEEE488.2 188513E-01L SCB-68 182469-01 terminal board TBX-68 83420 DAQ Termination Board 3 units SCXI-1331 184268C-01 Rev. 3.1 2 units Cable 188841B-02 SH37F-SH37M-2 10 units See also my other test and measuring equipment. We also buy.

Condition: like new (used), Device like new The new Discovery Hybrid Rheometer (DHR) series represents the latest technological advancements from the global leader in rheology. It combines a patented advanced drag cup motor, second-generation magnetic bearing, Force Rebalance Transducer (FRT), and a new, patent-pending True Position Sensor (TPS) in a single-head hybrid rheometer. Iodjx E Sm Hepfx Ab Noat DHR offers unprecedented performance and delivers unmatched precision for direct strain control, direct stress control, and normal force measurement. DHR includes all the popular TA innovations, such as patented Smart Swap geometries and the widest range of commercially available temperature systems and Smart Swap accessories. The result is the most advanced and versatile rheometer platform imaginable. The HR-1 model is a robust, precise, and field-proven rheometer. HR-1 utilizes state-of-the-art Discovery Hybrid Rheometer technology in a platform ideal for production control, asphalt manufacturing, and a wide range of general viscosity and viscoelasticity measurements.

Condition: like new (used), Year of construction: 2007, Angle saw ECO INSTRUMENTS PDS Angle ranging from 45 to 90 degrees For precessing georgian bars and regular spacer bars Isdpfx Abeiy Du Do Nsat Year of production: 2007 Excellent condition Functioning, tested Available immediately

Condition: good (used), Year of construction: 2007, max. wheel diameter 500 mm gear width 200-400 mm module 12 turning speeds 0-3250 U/min bracke pressure bis max. 95 Nm inner taper Konus #39 Control Fanuc 16 total power requirement 15 kW weight of the machine ca. 6 t dimensions of the machine ca. 2.350 x 2.240 x 2.500 mm Iajdpfxsvr Hf Eo Ab Nst HIGHLY FLEXIBLE TESTING OF HARD, FINISHED AND GREEN SPIRAL BEVEL AND HYPOID GEAR SETS The T 60 bevel gear testing machine is a CNC testing machine with three linear axes for the fully automatic hard and soft testing of spiral bevel and hypoid gear sets with a 90° axis angle. It offers versatile objective and subjective testing options with speeds up to 3,250 min and braking torques up to max. 95 Nm.

Condition: good (used), workpiece diameter between centers: 2,286 mm, The No. 61 Angular Hypoid Tester is designed to test large bevel and hypoid gears up to 90" diameter and with shaft angles from 0 - 135 degrees. Spur, helical and internal gears can also be accommodated. The drive or pinion spindle can be rotated in either direction at a recommended spindle speed of 600 RPM. It is mounted in a head which is vertically adjustable on a column, so that the spindle can be offset either above or below the center line of the gear spindle for testing hypoid gears. The pinion head column is adjustable angularly in a horizontal plane to permit testing of gears of any shaft angle from 0 - 135 degrees. Specifications: Centerline of Drive Spindle to Nose of Brake Spindle (90 degrees shaft angle and without face plate): 38-1/2" Max. / 7-5/8" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and without face plate): 60" Max. / 10" Min. Centerline of Brake Spindle to Nose of Drive Spindle (90 degrees shaft angle and with 54" face plate): 60" Max. / 28" Min. Centerline of Brake Spindle to Centerline of Drive Spindle (For Spur Gears): 56" Max. / 6" Min. Distance Between Nose of Brake Spindle and Nose of Drive Spindle (for spur gears): 36-1/2" Max. / 0" Min. Offset of Drive Spindle Either Above or Below Centerline of Brake Spindle: 10" Range of Shaft Angles: 0 - 360 Degrees Maximum Diameter of Gear: 90" Diameter of Face Plate: 54" Outboard Bearing: 3" Diameter Hole Spindles: RPM of Drive Spindle Pulley Set No. 1: 100 - 400 RPM of Drive Spindle Pulley Set No. 2: 250 - 600 Diameter of Taper Hole (large end): 6" Taper Per Foot: 3/4" Iasdpfx Abjrtrzdj Nst Depth of Taper: 8" Hole Through Spindle: 5-1/2" Net Weight of Machine: 20,000# Net Weight of Machine W/Outboard Support and Bed Plate: 24,000#

Condition: good (used), Year of construction: 2002, Clampable cutter head type (max.) 460 mm Cutter head weight (max.) 150 kg Mounting disc diameter for cutter heads (Ø) 360 mm Mounting cone for cutter heads Nominal diameter Ø 58,227 mm travel -z axis 200 mm diagram-drawing enlargement ±10 - ± 500 µm weight of the machine ca. 2,3 t dimensions of the machine ca. 2 x 1,5 x 2,03 m In the manufacturing process for spiral-toothed bevel gears, the quality of the gear cutting gear cutting tools used plays a decisive role. Particularly in high gear cutting quality and a long service life can only be achieved with precisely can only be achieved with precisely adjusted cutterheads. The Oerlikon cutterhead setting and testing device CS 200 enables quick and easy setting of the individual knives and simple adjustment of the individual knives, it checks the position and documents the measurement results. The measuring sequence on the CNC-controlled testing device is partially automated: The individual actions for carrying out the actions for carrying out the sequence are displayed on the screen via the operator guidance. The positioning of the individual knives in the cutter head and the height of the knife tips is largely automatic thanks to a special sequence and is simultaneously documented by means of a run-out diagram. A subsequent measuring sequence checks the radial position of the inner and outer cutting edges of all knives in the cutterhead. If individual test parameters on the knives do not correspond to the the tolerance specifications, this can be individually repositioned. The combination of semi-automated setting sequence, operator-guided set-up actions and automatic operator-guided set-up actions and automatic measuring sequence, cutterheads can be can be set conveniently, quickly and with high precision. Iaedpfx Abow N S E Ae Net Operator-guided setting and test sequence - Graphic display of the cutter head design and the measurement results with tolerance check - Instructions for the operator in plain text Instructions for the operator in plain text (without coded information) - Simple assignment of the measurement results to the knives - Documentation of the setting and measurement results via printer- Setting and test sequence suitable for ARCON®, RSR, Spirapid, SPIRON®, TRI-AC® types - Interface for neutral data

Condition: like new (used), mileage: 160,000 km, fuel type: diesel, overall weight: 19,000 kg, axle configuration: 2 axles, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Year of construction: 2021, MULTIPLE UNITS AVAILABLE 19T & 16T EURO 6 WITH 290 HP & 250 HP BOX BODY TAIL LIFT TRACKING SYSTEM Iodpfxsy Sgpce Ab Nsat AIR CONDITIONING CAMERA INSPECTED

Condition: used, centre height 250 mm weight of the machine ca. 120 kg Iodpfx Ajy Sux Sjb Nsat Reversible clamp with angle scale and three-jaw chuck Dimensions: Chuck diameter 255 mm 60 mm bore Center height 250 mm Base area 350 mm x 400 mm Item Features: Our offers are used items, i.e. can Soiling, storage marks, damage, such as scratches and color defects may also be present. Errors in technical data and description reserved

Condition: used, length 1020 mm Isdpfx Absy Sur So Nsat width 580 mm depth 520 mm weight of the machine ca. 590 kg

Condition: good (used), Year of construction: 1998, Tool setting device, tool presetting device, milling cutter setting device -Z-axis: 630 mm -unit of analysis -360 degree protractor -Dimensions: 570/1720/H1875 mm Ijdpfxspam Avo Ab Njat -Weight: 387 kg

Condition: used, Cooling unit, cooling water recooler, water chiller, chiller O. Hellwig Year of manufacture: approx. 1995 Cooling capacity: approx. 8 kW Rated power of cooling unit: 3 kW Refrigerant: R422D Water tank volume: approx. 35 liters Iedpfjpu R Ncex Ab Neat Circulation pump flow rate: 40 liters/min Pump output: 0.63 kW Water connections: 1/2 inch Power supply: 380 Volt, 50 Hz - Temperature setting via rotary potentiometer Space requirement (L x W x H): 1100 x 750 x 140 mm Weight: 285 kg

Condition: used, Plasma cutting unit, plasma cutting machine MESSER GRIESHEIM Type Plasmastar HA 95 Serial No. 4040323 Year of manufacture: 1990 Power: 95 Amp. - 60% duty cycle 45 Amp. - 70% duty cycle Adjustment range: 2 steps Cutting capacity: 25 mm (clean cut) Severance cut up to 45 mm Hand torch: PHC 95/140 Power supply: 380 Volt, 50 Hz, 32 Amp. plug Iedpfx Absyah R Ns Neat - Water-cooled - New hand torch BINZEL ABICOR, Type Abiplas Cut 200 W - 6 meter hose package length - Operating manual Space requirements (L x W x H): 900 x 480 x 850 mm Weight: 160 kg Very good condition

Condition: used, Electric chain hoist, electric hoist, crane GIS type 150 / F serial no.: 1502802 year of construction 1981 lifting capacity 1500 kg hook path 4 meters Iaodjgi E Evepfx Ab Net Main hoisting speed 4 m/min. Fine lifting speed 1 m/min. - Electric trolley with one speed for double T-beam - 2 load lines good condition

Condition: used, Impulse shielding gas welding machine REHM type RMP 400 Hybrid (REHM-Mega-Puls) Pulse welding unit with inverter welding power source Serial no. Year of manufacture 1998 Power output 400 Amps = 60% duty cycle 320 Amps = 100% duty cycle Continuously adjustable range Mains connection 400 Volt, 50 Hz, 32 Amp plug - separate 4-roller wire feed unit with connecting hose package meters - digital display for voltage and current - pulse welding function with single and double pulses - 2-stroke and 4-stroke welding function - 4 meter Binzel hose package with central connection - water-cooled Iodpfxewa Uwds Ab Njat - shielding gas pressure regulator - MIG/MAG pulse arc welding - MSG double pulse welding - MIG/MAG welding Space requirement L x W x H 1150 x 510 x 1350 mm Weight 200 kg good condition

Condition: used, Electric chain hoist, electric hoist, crane STAHL type T510-8 / 2.0 2/1 Fab. No. 1524132 Year of construction 1997 lifting capacity 2000 kg hook path 4 meters Main hoisting speed 4 m/min. Fine lifting speed 1 m/min. load strands 2 Cable length control bottle approx. 0,9 meter rated power 1,6 kW / 0,36 kW Rated current 4.3 A / 2.5 A Mains connection 400 Volt, 50 Hz - Suspension eye on the top of the crane Isdpfskwh H Asx Ab Njat - emergency stop weight 75 kg good condition

Condition: used, Tool presetter GILDEMEISTER-DE VLIEG Type EGS 5045 / Microset DPS 100 Serial No. 83-10-102 Year of construction 2002 Iaedpfx Aehbal Dsb Nst Travel distance X-axis approx. 400 mm Travel distance Z-axis approx. 400 mm Tool holder in mounted rotary table: Ø 50 mm Pitch circle diameter of the tool holders in the mounted rotary table Ø 340 mm Inner cone in the mounted rotary table Ø 245 mm Tool mounting plate as rotary table with 8 mounting holes Ø 50 mm Centering diameter of the mounted tool holder plate: Ø 102 mm Swivel-mounted flange holder with centering diameter: Ø 102 mm Swivel-mounted flange holder with outer diameter: Ø 155 mm Swivel-mounted flange holder with 3x M10 mounting holes, bolt circle: Ø 130 mm Mains connection 230 Volt, 50 Hz - Microset DPS 100 measuring electronics - Rotary table with 8 tool positions - Interfaces: 1x RS232, 2x measuring system (X/Z) - Profile projector with screen Ø 100 mm magnification 20x and two circular screens - Fixed focusing screen with crosshairs - Axis movement via manual quick adjustment with pneumatic clamping - Fine adjustment via hand wheels - Rotatable rotary table with pneumatic clamping - Metal substructure with 3 drawers Space requirement L x W x H 1100 x 1000 x 800 mm Weight 400 kg good condition

Condition: used, MIG / MAG Pulse Gas-Shielded Welding Machine FRONIUS Type TransPulsSynergic - TPS 330 Art. No.: 4.075 Serial No.: Year of manufacture approx. 2000 Output: 330 amps = 50% duty cycle (DC) Ijdjyv H Elopfx Ab Neat 300 amps = 60% duty cycle (DC) 210 amps = 100% duty cycle (DC) Stepless adjustment range Open circuit voltage approx. 50 V Open circuit voltage approx. 30 V Power supply: 400 V, 50 Hz, 32 A plug - Digital display for voltage and amperage - Pulse welding function - Various welding programs selectable Welding methods: MIG/MAG/TIG (programmed and manual modes) 2-stroke, 4-stroke, 4-stroke special, and spot welding - Welding control with program memory and disk drive for external program storage - Separate 4-roller wire feeder FRONIUS Type VR 152 with connecting hose package approx. 1.5 meters - 4-meter BINZEL hose package with central connection - External Fronius water cooling unit Type FK 71 - Welding gas pressure regulator - Supplied with 1.2 mm welding wire Space requirements (L x W x H): 900 x 660 x 1550 mm Weight: approx. 160 kg Good condition – fully functional – ready for demonstration

Condition: used, 4 INGERSOLL adjustable chuck jaws for face plate Chuck jaws for lathe chuck, mechanical clamping device, clamping block No: 39.02.10000 / 501.397 Jaw width 70 mm Jaw length 180 mm Jaw carrier height 150 mm Iajdpeu Axzkofx Ab Net Base plate 325 x 265 mm - Stepped jaws for turning as turning and drilling jaws - Jaw adjustment via trapezoidal threaded spindle - Jaw carrier with 6 recesses 40 x 30 mm for fastening - Distance between recesses 280 x 133 and 220 x 90 mm (centered) Dimensions L x W x H 325 x 265 x 215 mm Weight per jaw 36.5 kg Weight of all 4 jaws 146 kg Good condition