Used Cyclone Vortex for sale (261)

Condition: used, Used Niro Mobile Minor stainless steel laboratory spray dryer. This unit has an approximate evaporation rate of 1 to 7 kg/hr depending on product. Has stainless steel chamber approximately 800mm diameter x 915mm straight side. Chamber is lagged and clad. Has electric heater, cyclone and pipework. Unit is mounted on mobile frame. Includes stainless steel Niro centrifugal air operated atomiser. Click on the link below to see a video of the machine running. Iaedpjygvmrsfx Ab Nst

Condition: good (used), Year of construction: 2013, Central control WAGNER automatic powder spraying booth (pre-treated parts), incl. WAGNER SuperCenter powder supply unit (2013) Manual powder spraying system (small series, mixed colors) with guns Cyclone separator Block gas-heated water drying furnace. drying and baking furnace (incl boiler) Isdpfoyhbdfjx Ab Neat The powder-coated workpieces are fired in a natural gas-heated powder firing furnace Cooling after water drying Cooling after powder firing Handling system Automatic wastewater treatment capacity: max.: ~ 1 m³/h

Condition: like new (used), The system is a complete surf finisher system including suction station + undersize screening station + complete water treatment + water tank from Rösler. If required, including robot + handling portal. The components are transferred by robot to a portal with holders and immersed in the rotating surf container. The deburring performance is 20 seconds. Immersion time corresponds to about the same performance as 10-15 minutes. in a conventional vibratory finishing machine. Rotating work tank RMSF 4/800 1 piece round plastic container - Working tank diameter: 850 mm Working tank depth: 500 mm 1 pc. quick coupling for easy changing of the working container 1 pc. drive motor, power 7.5 kW 1 pc. dosing device D1-K/320 SF (circulating water) on stand 1 pc. stand for enemas in the working container 1 piece flow monitoring (by means of flow monitor) Undersize screening: 1 pc. Grinding wheel return system 1 piece underframe as a stable welded construction 1 pc. balancer for weight compensation (sanding pad + hose + nozzle) including mounting frame - Suspension for hose on the base 1 pc. vacuum generator for generating a negative pressure - Connection of the line system to the transfer device of the vibratory finishing system - Suction hose with nozzle, length approx. 5 m 1 piece collection container 500 liters as a cyclone separator - for receiving the process media that are sucked out of the working container, - for delivering the process media to the screening machine - incl. automatically operated gate valve and hose for returning the process media to the screening machine 1 pc. spray nozzles for rinsing out the collection container 1 pc. 2-hand control for flap 1 pc. dosing device DZ1-K Rösler screening machine R 12/6 SM-E - for undersize screening - Total length: 1,400 mm - Overall width: 1,160 mm - Screen area: 1,200 x 600 mm - Delivery height: 1,065 mm - Step in the separation zone: 1 x 40 mm - Drive power of vibration motors 2 x 0.525 kW - Vibration motors arranged laterally - Engine speed: 1500 rpm - Operating voltage: 400 V, 50 Hz, 3 Ph N/PE Rösler centrifuge Z 1000 ASS-II-Turbo with automatic sludge discharge consisting of: Centrifuge Z 1000 * Aluminum alloy centrifuge rotor * Speed: 2,050 rpm * Reduced stripping speed via frequency converter * automatically retractable paring knife * Amount of sludge per peeling cycle: up to 25 kg * automatic residual water drainage Isdpfxoyngito Ab Nsat * Long bearing service life due to special bearings that can be relubricated * electronic vibration monitoring * automatic rotor flushing Accesories 1 piece mud truck RSKM 30 1 pc. Combined waste water and circulation tank 700/700 liters 1 pc. flocculant dosing pump DP2 1 pc. Automatic post-dosing DZ-4/320 2 suction lances (vacancy monitoring) 1 pc. sound insulation package approx. 80 dB(A) 1 piece cooling unit RK 3 1 piece titration measuring kit for manual compound measurement

Condition: new, functionality: fully functional, machine/vehicle number: HR14477, Year of construction: 2025, load capacity: 3,500 kg, lifting height: 4,000 mm, fuel type: diesel, mast type: duplex, construction height: 2,750 mm, power: 37 kW (50.31 HP), fork carriage width: 1,260 mm, fork length: 1,200 mm, empty load weight: 4,922 kg, total length: 3,189 mm, drive type: Diesel, construction width: 1,330 mm, Off-road forklift Chassis number: HR14477 Iaedpoykgb Uefx Ab Nst Load centre of gravity: 500 Fork width: 125 mm Fork thickness: 45 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Duplex Condition: New device Technical condition: New Front tires size: CONTINENTAL RT20 165A5 31570 R15 22PR 8015 Front tires condition: New Rear tires size: CONTINENTAL RT20 136A5 700 R12 16PR 500S1 Rear tires condition: New Description: 12 month factory warranty / Max. 2000 operating hours 3rd valve, 4th valve, front work light, full cabin, CE certificate, interior mirror, joystick, rotating beacon, windshield wiper, LED, seat, Mast tilt valve Load suspension 3rd + 4th function Hydraulic kit Fixed connection for the 3rd + 4th hydraulic circuit Speed increase for hydraulic functions with cross lever Air-sprung fabric seat GRAMMER MSG95 Street lighting halogen front + rear Fender extension front metal 1300mm Reversing warning signal Lockable diesel tank cap Raised vertical exhaust on counterweight Cyclone filter

Condition: like new (used), Year of construction: 2020, System: 2-phase centrifuge, dewatering system in a double-deck container Manufacturer: Hiller Type: DP45N.422 VA HY Mach. No.: H6138 Year of manufacture: 2020 System: in a double-deck container, conveyor technology with side swivel conveyor, separate pump technology. System: demonstration system - as good as NEW! Isdpjv D Rlyofx Ab Noat Maximum permissible speed: 3500 l/min Permissible Density: 1.3 kg/m3 Inner diameter of drum: approx. 450 mm Material: All parts in contact with the media made of duplex steel Drum material: 1.4470 Drum wall thickness: 11 mm Max. operating pressure: 100 mbar Drum drive: size 200L Power: 30 kW Speed: 3000 rpm V/Hz: 400V, 50 Hz Hydraulic unit: PVRK07521L Power: 7.5 kW Control: FU Seepex pump: concentrate pump MD 006-12, see photos Macerator: Vogelsang, type RotaCut, RCQ-26G inline cyclone, BioCut and RCQ-33G inline cyclone see photos Spiral conveyor: Hiller see photos Polymer plant: GVU Technik Polymer Mix Station - technical data see photos Documentation: complete

Year of construction: 2025, condition: new, The Zig-Zag Air Separator by Koltex Plastic Recycling Systems enables efficient separation of bulk materials into fractions with different densities. The material to be separated is fed into the device via a rotary valve, ensuring even distribution across the entire cross-section of the separation channel. Sorting is carried out using an upward airflow generated by a high-performance blower. The air flows through the separator channel, lifting lighter particles while heavier fractions fall downward due to gravity. The specially designed Zig-Zag channel forces the material to pass through the airflow multiple times at each turn. Lighter fractions are effectively lifted and discharged through the top airflow, while heavier particles remain and fall, ensuring precise and efficient separation. The separator is equipped with advanced dust extraction cyclones with filters that eliminate dust emissions throughout the process. This ensures not only high separation efficiency but also environmental safety and workplace cleanliness. Iodpfxjvmxvfo Ab Nsat Koltex Plastic Recycling Systems also offers high-quality shredders, which can be integrated at the start of the process to create a complete grinding line with the separator. This solution enables comprehensive material processing, from shredding to precise separation, providing full control over the recycling process.

Condition: used, mileage: 929,800 km, power: 375 kW (509.86 HP), first registration: 11/2016, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2016, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, DAF XF460 FT SC Hydraulic Tractor Unit----Commercial Vehicles Göppl GmbH - DAF---- First registration: 02.11.2016 Equipment: * Space Cab cabin * Mechanical cab suspension * Central locking system * Adjustable roof spoiler * Air horns, 2 sets * 2 roof-mounted LED beacons * LED headlights * Sun visor Iodpfx Aeylrzceb Nsat * Side skirts * Driver’s seat: Luxury Air with armrest * Co-driver’s seat: Basic * Upper sleeper bunk * Lower sleeper bunk with Xtra Comfort pocket spring mattress and drawer * Refrigerator / coolbox * Navigation radio * CB radio * Truck telephone * Air conditioning * Auxiliary heater * Stand-alone cab climate control / parking heater * DAF Night Lock * Adaptive cruise control with FCW and AEBS * Preparation for pneumatic equipment * Glass roof hatch with electric control * Predictive cruise control * MX13 engine, 375 kW / 510 HP * Engine idle shut-off after 5 minutes * 12-speed AS-Tronic gearbox * AS-Tronic light * Rear axle ratio: 2.69 * ZF-intarder * Tires: - Front: 385/65R22.5 - Rear: 315/70R22.5 * ALCOA alloy wheels * Axle load monitoring * Wheelbase: 3.80 m * Suspension: - Front: Parabolic, 8.0 t - Rear: Air suspension, 13.0 t * Aluminium fuel tank: 845 litres * AdBlue tank: 90 litres * LED work lights behind cab * LED rear lights * Fifth wheel kingpin distance: 670 mm * Stone guard * PTO (Power Take-Off) * Single-circuit hydraulic system * Toolbox * Top-mounted air intake with cyclone separator * 12V auxiliary power supply in roof console * Tipping hydraulics with swing arm * Rubber floor mats * Transmission tunnel mat * Chrome wheel trims * Lift axle control switch * Waeco parking climate control system Vehicle had a maintenance contract.

Condition: new, Year of construction: 2026, Bio Machines has been designing production lines, manufacturing machinery, and providing assembly services for over 20 years. We offer both complete production lines and individual machines, tailored to your needs. Our solutions include: Pellet production lines Briquette production lines Drying systems: rotary and belt-type Hammer mills Moving floors Feed bins Wood chippers Chain, bucket, screw, and belt conveyors Cyclones Silos Pellet coolers Sawdust and pellet sifters Bagging machines for small bags and big bags Palletizing lines for bags And many other specialized machines Iaodpfxeylm Tyo Ab Njt

Condition: used, For sale: Salmatec Maxima 700 pellet press in full working condition, installed in a Rematec container with electrical cabinet and a tent shelter. Capacity – up to 3 t/h. The line includes: - Press and hammer mill: Salmatec – reliable German quality with high efficiency and durability. - Conveying and dosing equipment: Rematec – robust and precise material handling at every stage. - Additional equipment: cyclones, sieves, cooler, control cabinet, etc. - Tent shelter. Key advantages: - High production capacity – up to 3 t/h. - High-quality European manufacturer components. - Suitable for professional pellet production from wood biomass, agro-biomass or other raw materials. - Fully operational line – demonstration possible. - Available immediately. Ijdpfxsit I Rts Ab Neat Dismantling and transport are to be arranged by the buyer. We can recommend a company to assist with this process. The equipment can be inspected in full working order in Sweden. All foundation drawings and DWG files are available. Price: EUR 650,000

Year of construction: 1988, condition: ready for operation (used), A powder tower system, a chimney and a burner for the food industry or the milk processing industry, in particular for the production and drying of milk powder or similar products, are available. 1) Tall form dryer SPX Flow APV, type II K, year of construction: 1988, water evaporation capacity: 1000kg/h, products: MPC 80/MPC 85/WPC 60/MCN 85. Components of the powder tower system: drying tower, two collecting cyclones with rotary conveyors, feed cyclone, buffer tanks, lift inlet preheater, homogenizer, vibration filter, control cabinet with frame construction and two atomizer and nozzle systems. 2) Steel chimney Fűtőker, year of construction: 2022, diameter 1/2: 800mm/600mm, height: 20500mm. 3) Weishaupt WM-G20/3-A burner, year of construction: 2014, documentation available. On-site inspection is possible. Isdpfevmq Tiox Ab Neat

Year of construction: 2008, condition: ready for operation (used), A mechanical centrifugal dryer B+B Anlagenbau for plastic flakes and washed materials is available. 1) Mechanical dryer B+B Anlagenbau FH 50/150-V, year of manufacture: 2008, power: 30kW, max. relative humidity: 60%, machine dimensions X/Y/Z: approx. 4050mm/1150mm/3850mm, weight: approx. 1250kg. 2) Separation tank Weiss, material: stainless steel, machine dimensions X/Y/Z: approx. 3000mm/1500mm/1800mm. The motors and slides need to be overhauled. 3) Friction separator B+B Anlagenbau FAS 40-300, power: 22kW, speed: 1470rpm, max. relative humidity: 60%, separated material: PET/PE/PP. Total system dimensions X/Y/Z: approx. 6500mm/2100mm/3200mm, design: modular, cyclones: 2/bunker, process: conveying/separation/friction drying/final dewatering. Documentation available. An on-site inspection is possible. Iajdpfoxl Eltex Ab Njt

Condition: ready for operation (used), Year of construction: 2011, A complete pasta line with 2x Cappelletti forming sets is available. 1) Pasta Technologies Group SRL dosing and mixing unit for pasta ingredients such as flour, water, and micro-ingredients. 2) Combined mixer-sheeter Pasta Technologies Group SRL MASA 540, year of manufacture: 2022, dough sheet thickness range: 7mm–8mm, dough sheet width: 540mm, corrugated rollers: 3, pairs of smooth rollers: 1. 3) 2x forming machines GEA/Pavan MRW 540, year of manufacture: 2011, pasta types: Ravioli/Cappelletti, production output Ravioli/Cappelletti: 140/120 strokes/min, dough sheet width: 540mm, machine dimensions X/Y/Z: approx. 1800mm/1700mm/1300mm, weight: approx. 1200kg, filler frame weight: approx. 210kg. Includes 2x Cappelletti tools 3D. 4) Double conveyor belt and waste recovery unit. 5) Dough scrap return system Pasta Technologies Group SRL RS100 with cyclone. 6) Complete system control and management by Pasta Technologies Group QEHD. Documentation available. An on-site inspection is possible. Iaodow Dfgkopfx Ab Not

Condition: used, Year of construction: 1993, functionality: limited functionality, nominal heat output: 500 kW (679.81 HP), heating capacity: 500 kW (679.81 HP), operating pressure: 4 bar, Equipment: type plate available, Urbas reciprocating grate heating system with primary and secondary blower, cyclone, hydraulic fuel discharge with push rod (no auger), all hydraulically operated for coarse material. Some boiler passes are welded. Complete with control unit, has been in operation until now; plant is being dismantled due to relocation. Fireclay lining in very good condition. Iedpfx Aoyk Sgceb Nsat

Condition: new, power: 390 kW (530.25 HP), fuel type: diesel, overall weight: 32,000 kg, tire size: 315/80R22.5, axle configuration: 8x4, wheelbase: 4,850 mm, brakes: engine braking, color: silver, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, loading space volume: 14 m³, loading space length: 6,000 mm, loading space width: 2,380 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, steel body, integrated toolbox, 1x comfort seat, 1x bunk, seat heating, rear window, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, navigation system, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, fog lights, work lights, beacon, pendulum flaps, roof hatch, green environmental badge Wheelbase: 4,850 mm Body: Meiller three-way tipper body with chute approx. 14 m³ 8 t front axle, rear axle banjo 440 hypoid 13 t, electronic braking system with ABS and ASR, disc brakes with partial protection front and rear axles, electronic parking brake, condensate monitoring for compressed air system, front axle stabilizer, supplemental stabilizer for rear/trailing axle, aluminum front underride guard, seatbelt control, 1x lower bunk, residual heat utilization, additional hot water heater, extra thermal insulation, PSM 2nd generation, reverse warning system, illuminated Mercedes star, ClassicSpace, comfort central locking system, light and rain sensor, driving mode economy/power, Mercedes PowerShift 3, navigation system, MultimediaCockpit Interactive, pre-setup for toll collection, LED daytime running lights, high-performance engine brake, cyclone pre-filter for coarse dust, safety pack, ESP, lane keeping assist, distance control assist, attention assist, traffic sign assist, Active Brake Assist 5, driver airbag, rear engine PTO with hydraulic pump ISO 7653D. Isdpfeyhrawox Ab Neat Frame length approx. 6,800 mm! Frame height approx. 1,100 mm! New vehicle from stock with day registration on 16.12.2025! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors excepted!

Condition: ready for operation (used), System includes (1) Screw Compressor BOGE SF 75-2 (2) Cyclone Separator BEKO CLEARPOINT (3) Fine Filter BEKO CLEARPOINT (4) Refrigeration Dryer BEKO DRYPOINT RA eco (5) Catalytic Converter BEKO BEKOKAT CC 360 (6) Carbon Filter BEKO CLEARPOINT. Iaedshvizgopfx Ab Nst

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 9,595 kg, maximum load weight: 16,405 kg, overall weight: 26,000 kg, axle configuration: 6x6, wheelbase: 3,600 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, air conditioning, all wheel drive, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, Kz. Haus, 1x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, fog lights, leaf air suspension, tow bar air + light, aluminum tank, side. Aluminum underbody protection, roof hatch, green environmental badge Wheelbase: 3600 mm 9t front axle, Hydraulic Auxiliary Drive (HAD), rear axle crown gear 233 planets 13.4t, pipe rupture protection for brake system, electronic braking system with ABS and ASR, ABS can be switched off, disc brakes with partial protection on front and rear axle, electronic parking brake, condensate monitoring for compressed air system, front axle stabilizer, massage function for driver's seat, residual heat utilization, construction site filter, PSM 2nd generation, ClassicSpace, MirrorCam, comfort locking system, light and rain sensor, off-road driving program, Mercedes PowerShift 3, Classic Cockpit, preparation for toll collection, protective plate for tank, daytime running lights, high-performance engine brake, cyclone pre-filter for coarse dust, transmission oil cooling, ESP, lane keeping assistant, attention assistant, turning assistant, Active Brake Assist 5, tire pressure monitoring, auxiliary drive MB 131-2c Pump, engine output rear b flange 100mm 650NM. Frame length approx. 5700mm! New vehicle from stock with daily registration on June 23rd, 2022! ACCESSORIES INFORMATION WITHOUT GUARANTEE, changes, prior sale and errors reserved! - . Ijdpfx Absvi Rx Re Noat

Year of construction: 1988, condition: good (used), functionality: fully functional, The offer includes: Herbold feed conveyor, S&S metal detector, Herbold granulator with 8, 10, and 12 mm screen baskets, 7.5 kW extraction fan made from Hardox, dedusting system with cyclone and rotary valve for separating fines from the ground material, transfer fan for Big Bag filling, Big Bag station for two Big Bags with pneumatic switching, and control cabinet with overload protection. Iaodpjygv Uiefx Ab Not

Condition: used, Hosokawa Mikropul ACM 2/3 classifier mill used, with suction filter, suction cooler, fan, cyclone, piping, unfortunately the filter is missing Iaedpfx Asvcmc Eeb Net

Condition: used, mileage: 218,160 km, power: 330 kW (448.67 HP), first registration: 05/2017, fuel type: diesel, empty load weight: 16,150 kg, maximum load weight: 9,850 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,900 mm, next inspection (TÜV): 05/2024, brakes: engine braking, color: black, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, loading space volume: 11 m³, loading space length: 4,900 mm, loading space width: 2,420 mm, loading space height: 1,000 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace, Mercedes PowerShift 3, steel body, Mtlg. House, 1x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, power take-off, differential lock, work lights, rotating beacon, stowage box, leaf spring suspension, left-hand on-board suspension, air+light tow bar, aluminum tank, U-protection, roof hatch, crane at rear, emergency stop, grapple control, high seat, 2-point hydraulic outriggers, 1x hydr. extension, green environmental sticker Wheelbase: 3900 mm Body: Meiller 2-sided tipper body with Bordmatik left approx. 11m³ & rear crane Hiab Jonsered 1300RS79 with high seat, loading height approx. 1540mm. 8t front axle, rear axle disc wheel 300 planetary 13.4t, electronic brake system with ABS and ASR, disc brake with full protection on front and rear axle, ABS can be switched off, parking brake additionally on front axle, condensation water monitoring for compressed air system, stabilizer bar on front axle, stabilizer bar reinforced 2nd rear axle, leather steering wheel. rear axle, leather steering wheel, smoker's package, residual heat utilization, construction site filter, additional thermal insulation, PSM, ClassicSpace, comfort locking system, off-road driving program, Mercedes PowerShift 3, pre-installation for toll collection, tank capacity: 290l, protective plate for tank, LED daytime running lights, High Performance Engine Brake, protective plate under bumper, cyclone pre-filter for coarse dust, transmission oil cooling, Powertrain Pack 1, Protection Pack, Grounder, MB 123-10c MPA N-/M-Speed power take-off. Load diagram: 4m-2940kg, 6m-2100kg, 7m-1800kg! VIN: WDB96421610141255! Gripper available at an extra charge! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Iaodpfx Absvhmkaj Net - .

Condition: new, Year of construction: 2026, The front-opening sandblasting booth is a significant convenience for large and heavy workpieces. Telescopic actuators mounted in the door facilitate opening. As a standard, the sandblaster has a built-in dust extractor generated during sandblasting. Equipped with a set of nozzles, a gun and protective stickers for the visor. Machine description Dust-free operation of the device is ensured by the use of circumferential gaskets, which allows you to perform work in an environmentally friendly manner. The sandblasting hose is placed in the lower part of the collection container. Drain hole allows quick change of blasting material. The sand blaster is used for cleaning and processing various types of surfaces, e.g. removing rust, paint, deposits from metal surfaces, e.g. automotive parts, engines, fittings, housings, wheels, rims, etc. The following can be used as an abrasive: , silicon, glass beads, plastic sand, emery and other materials. KDP450TOP technical parameters CAPACITY 450L (0.45m3) AIR CONSUMPTION 400 - 1000 l/min OPERATING PRESSURE 4 - 8 BAR AIR CONNECTION 1/4" (INCH) QUICK RELEASE VIEW AREA 580 x 270mm DRAIN CONNECTION fi 64mm and 90mm CAB INTERNAL DIMENSIONS (Width x Depth x Height lowest/highest point) 1140 x 650 x 630mm DIMENSIONS 1260 x 1000 x 1600mm WEIGHT 105 kg Standard equipment DC15 cyclone exhaust Working field lighting - 12 V fluorescent lamp with 230 V power supply with switch 2 high-quality work gloves made of rubber, integrated with the device 2 suction (vent) connections with a diameter of 64 mm and 90 mm for connecting a suction device Sand blasting gun with four replaceable ceramic nozzles 4 pieces of replaceable protective film for the window, viewfinder front door with rubber perimeter seals for dust-free operation Isdpsm Nccxofx Ab Nsat Manual in English We kindly inform you that the device requires self-assembly. We kindly inform you that the device requires self-assembly. The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Condition: like new (used), Year of construction: 2023, functionality: fully functional, operating hours: 300 h, power: 15 kW (20.39 HP), input frequency: 50 Hz, volume flow: 10,000 m³/h, suction capacity: 10,000 m³/h, Equipment: CE marking, documentation/manual, as-new SMU, including cyclone with discharge via rotary valve Isdpfxsykb Nao Ab Njat

Condition: new, Year of construction: 2014, functionality: fully functional, UNUSED TEMA INDUSTRIAL DRYING PLANT – FLUID BED DRYER – COMPLETE SYSTEM A complete "Industrial Drying Plant manufactured by TEMA Process B.V. (Netherlands)" is available for sale. The system is based on a Shaking Fluid Bed Dryer technology and was originally designed for drying industrial materials such as sludge, minerals, chemical feedstocks and other high-moisture industrial products. The equipment has never been installed or commissioned and has been stored since delivery. Operating hours: 0 This is not just a dryer, but a complete industrial drying plant including conveying, filtration and control systems. --- # General Information Manufacturer: TEMA Process B.V. (Netherlands) System type: Shaking Fluid Bed Dryer / Cooler Year of manufacture: 2014 Condition: Unused – Never installed – Stored since purchase Iodpfsyrxwwjx Ab Nsat --- # Capacity * Water evaporation capacity: approx. 2.1 t/h * Dryer feed capacity: approx. 12,000 kg/h * Final product output: approx. 1,900 kg/h --- # Moisture Range Feed moisture: 40 – 60 % Final moisture: 10 – 15 % --- # Drying System * Shaking Fluid Bed Dryer with integrated cooling section * Drying air temperature: 120 – 250°C (nominal 190°C) * Direct fired natural gas air heater * Drying air flow: ~44,000 kg/h --- # Dryer Dimensions Fluidized bed area: 8.4 m² Dryer size: 7.3 m x 1.15 m --- # Energy Consumption Installed electrical power: ~218 kW Electrical consumption: ~160 kW Natural gas consumption: max. 190 Nm³/h --- # Scope of Supply (Complete Plant) The system includes the following equipment: Drying Unit * Shaking Fluid Bed Dryer / Cooler * Air supply system * Direct fired natural gas air heater * Recirculation fan * Combustion air fan * Cooling air fan --- Dust Separation and Filtration 2 Cyclone separators 1 Baghouse Filter Dust rotary valve Exhaust fan and ducting system 4 Explosion relief panels --- Material Handling System * Twin shaft paddle mixer * Granulator * Screw conveyors * Double screw conveyor * Bucket elevator * Product conveying system --- Automation and Control * MCC / PLC control system * Siemens S7-300 PLC platform * HMI operator panel * Upper control level ready for SCADA integration --- # Typical Applications The system can be used for drying various industrial materials including: * Industrial sludge * Minerals and mining products * Chemical raw materials * Recycling materials * Paper and pulp industry residues * Fertilizer and organic materials * Biomass and other industrial feedstocks --- Condition * Never installed * Never commissioned * Stored since delivery * Complete plant available --- Location Turkey The equipment can be inspected on site. Additional technical documentation and photos are available for serious buyers.

Year of construction: 2022, condition: like new (used), functionality: fully functional, A very rare opportunity to acquire a 3 year old 600 kgs per hour, complete hot wash recycling and cleaning line suitable for a range of rigid polymers to be size reduced and cleaned. Machinery has very low hours of operation, and is only available as a result of re-organisation of the companies operations. Materials are firstly delivered via a picking belt and metal detection tunnel, from a cage tipping device to a large Hot washing granulator. Size reduced materials then drop onto a vibrating sieve ,to separate the majority of dirty water, and then materials transfer to an inclined Archimedes screw delivering materials to a horizontal high speed centrifugal cleaner. After this cleaning the materials enter a large diameter vertical drying centrifuge with the finished materials then conveyed to a ZigZag air separator, before being blown to the cyclone over a double bagging tower. The fines separated at this stage are blown to a separate cyclone over a single bagging tower for fines and fibres etc removed by the ZigZag tower. Isdpfoxcnxdsx Ab Njat The entire line can be seen in operation in the UK and by special arrangement could be trialed with potential buyers materials. Used water caould be recycled through the system, but this is dependent upon the type of contamination to be removed. The entire line is of European manufacture, and all materials exposed to water are manufactured in Stainless Steel. Decommissioning, Transport, Installation and commissioning together with operator training can also be offered internationally to a buyer of the equipment.

Condition: ready for operation (used), functionality: fully functional, usable tank capacity: 3,650 l, 3 Enduramaxx brand propylene tanks of 3,650Litre capacity with 60 degrees cone. Iaodow A Sr Rjpfx Ab Not Dimensions: Without frame: 1400 mm Dia x 3150 mm High, With frame: 1400 mm Dia x 3460 mm High. The 3650L cone tank is used where 100% drainage is an advantage. The 60 deg. cone means that the liquid completely drains while helping address concerns with vortexing. The tank is rotationally moulded ensuring a consistent wall thickness and is manufactured from food grade polyethylene giving high impact and chemical resistance. Being UV stabilised the tank is suitable for outdoor as well as indoor use.

Condition: like new (used), Year of construction: 2024, As-new polishing machine OPTIMUM OPTIpolish GZ40P with variable-speed conversion featuring Siemens inverter and cyclone extraction system. For polishing wheels with a diameter of up to 350mm, maximum wheel width 35mm, wheel bore 20mm. Suitable for continuous and intensive industrial use. Heavy-duty industrial polishing machine; its high dead weight absorbs the already minimal vibrations. Maintenance-free, long-life induction motor with smooth operation, cast iron housing. Additionally equipped with: Variable speed drive using Siemens Sinamics V20 inverter. Circumferential speed adjustable from 34 m/s down to 6 m/s. Sturdy base with cyclone extraction integrated in the base, thus requiring minimal space. Sound-insulated. The base must be filled with concrete by the customer. Automatic start/stop feature: When the external device is powered on or off, the extraction system automatically switches on or off with a 2-3 sec delay. There is no need to operate the extraction system separately. According to hazardous substance regulations, residual dust is extracted after the machine shuts down. Iedpfeyglkyex Ab Noat The machine is located at 71334 Waiblingen-Beinstein and can, of course, be inspected by appointment. Please contact us for further information.