Used Cyclone Vortex for sale (274)

Condition: used, This listing is for 1 of 2 Fisherbrand F2 Vortex Mixer Nsdpfx Anoxzgvrsvswk

Condition: used, This listing is for a Hook and Tucker Rotamixer vortex mixer Nodpfx Ansxzhk Rovjwk

Condition: used, This listing is for a Grant Instruments PV-1 Vortex Mixer Ideally sized for personal use, the Grant-bio PV-1 vortex mixer is compact, with a low profile and small footprint, to sit in almost any location. The PV-1 is so small that it will fit in your hand – yet there is no compromise on performance. The reliable motor produces regulated and reproducible agitation throughout the speed range. It is also extremely quiet. With variable speed from 750 to 3000 rpm, the PV-1 can be used for gentle through to vigorous mixing and pellet resuspension in 0.5mL, 1.5mL, and 15mL tubes. Adjustable speed control: 750 to 3000 rpm ‘Continuous’ or ‘touch’ operation For tubes up to 20 mm diameter Pressure sensitive cup accommodates tubes up to 20mm diameter Reliable and extremely quiet motor produces regulated and reproducible agitation throughout the speed range Extremely easy to operate – select either ‘continuous’ or ‘touch’ operation and turn the knob to adjust the speed from 750 rpm to 3000 rpm In ‘touch’ mode, agitation starts in response to pressure on the pressure sensitive cup. Exceptionally compact with a low profile and small footprint – fits into almost any location Rubber suction pads hold tight to the work surface and prevent the unit from ‘walking’ – they also absorb vibration and prevent its transmission to the workbench Nwjdpfx Anexzg Eyovek

Condition: ready for operation (used), * Brand: Sotres Njdpfxjywm S Is Anvswk * Model: dewatering screen with cyclone * Dim. screen surface: 4300 x 1200 mm * with: two pieces vibration motor of each 4 kW * Dim. cyclone: length 3800 mm , Diameter 1000 mm. * incl.: Warman pump, type 10/8 with 75 kW e-motor. * Incl.: steel construction.

Condition: ready for operation (used), * Brand: Sotres * Model: dewatering screen with cyclone. * Dim. screen surface: 2800 x 1100 mm * Screen opening: 12 x 1 mm Nodpfxjywmv Hs Anvewk * with: two pieces vibration motors of each 2 kW * Incl.: springs. * Dim. cyclone: length 3500 mm, diameter 1100 mm. * incl.: steel construction * incl.: tank * incl.: Warman pump with e-motor , type 8/6.

Condition: ready for operation (used), * Brand: Schauenburg * Model: cyclone Nwodpfx Aneywmptsvsk * Length: 3100 mm * Diameter: 880 mm * On stock: 3 pieces.

Year of construction: 2025, condition: new, functionality: fully functional, Cyclone LZA 800, heavy-duty version, incl. internal wear plate Diameter: 800 mm, total height: 2500 mm Nwedpfjxyzpwex Anvsk Designed for a volumetric flow rate of approx. 5000 m³/h Upper section of cyclone: - Diameter: 800 mm - Height: 800 mm - Material thickness: 3 mm - Internal wear plate: 5 mm (bolted) - Immersion tube Ø350 mm - Inlet nozzle Ø250 mm with beaded edge - Bolt-on flange t=6 mm - Coated in RAL 7035 light grey Lower section of cyclone: - Diameter: 800 mm - Height: 1500 mm - Material thickness: 3 mm - Outlet nozzle Ø300 mm with beaded edge - Bolt-on flange t=6 mm - 2 mounting brackets - Coated in RAL 7035 light grey Other cyclone models in both heavy-duty and light-duty designs, as well as accessories such as rotary airlocks, conveying fans, wind sifters, etc., are available on request.

Condition: new, Year of construction: 2025, ⭐⭐⭐⭐⭐ (5.0) ⚡ Top Service | Fast Delivery | Excellent Support ✈️ Delivery Time: Only 8 Weeks ✅ Energy Efficiency Class A+++ ☀️ 2-Year Warranty Buy Directly from the Manufacturer – Benefit from Over 40 Years of Experience in Surface Coating Technology! 💶 Flexible Financing Options: Maintain liquidity with our attractive hire purchase, leasing, and warranty programs. Contact us today for details! 🌀 Mono Cyclone & Jet-Pulse Filter Unit for Large Powder Coating Systems Ideal for operations that require efficient powder recovery: Powder is collected beneath the mono cyclone, sifted through a mesh, and transferred to the color station via pneumatic pumps. From there, it is automatically fed back into the powder coating guns. ✔ Key Advantages: No need for an exhaust air duct Clean and convenient powder recovery process Compatible with all automatic powder coating booths Suitable for walk-in type booths as well Optional: Use the Jet-Pulse filter unit alone for an environmentally friendly, recovery-free setup Nwsdpfx Asdy E A Senvek 🔄 High-Efficiency Recycling Technology Only 4% material loss Maximized powder reuse Fully compatible with Proton MA-RYC-PRO Color Station for optimized performance in automated systems 👉 More details available in our listings or on our website. 🎨 Color Options: Our standard color combinations: Yellow-White Anthracite-White Custom RAL colors are also available upon request – please note that additional charges apply. ✅ Your Benefits at a Glance: Fast delivery in 8 weeks Direct from the manufacturer Energy-efficient (A+++) Comprehensive warranty & support Flexible financing models State-of-the-art powder recovery system

Condition: new, ⭐⭐⭐⭐⭐ (5.0) 36 Ratings ✈️ Free shipping : 25 days delivery ✈️⚡️ Top service ⚡️ Fast delivery ⚡️ Great support! ✅✅✅Energy class A+++✅✅✅ ✳️Keep your liquidity! We offer a variety of financing models to ensure your investment has the best chance of success. Contact us today to learn more about our hire-purchase, warranty or lease programs. ✳️ ✅MC 9 ►Number of filters: 9 ►Filter dimensions: 1850 * diameter 160mm ►Suction power: 4500 m3/h ►Electric motor power: 3 KW / hour ⭐Offer Price €6,000 EXCL.SHIPPING*⭐ ✅MC 17 ►Number of filters: 17 ►Filter dimensions: 1850 * diameter 160mm ►Suction power: 6500 m3/h ►Electric motor power: 5.5 KW / hour ⭐Offer Price €6,850 EXCL.SHIPPING*⭐ ✅MC 26 ►Number of filters: 26 ►Filter dimensions: 2500 * diameter 160mm ►Suction power: 8500 m3/h ►Electric motor power: 7.5 KW / hour ⭐Offer Price €9,000 EXCL. SHIPPING*⭐ ❗❗❗Apply dozens of colors in your cabin.❗❗❗ ► Would you like to reuse the sprayed paint ❓ In this case, in filtered booths, you need to use different filters for each color. If you use a monocyclone you save on filter costs and can easily reuse the sprayed paint. ⚡️⚡️⚡️Upgrade your existing filter cabinet with a monocyclone. This way you don't have to resort to different filters when using dozens of different colors. ✳️Why a monocyclone ❓ ✨1 - According to the opinion and advice of environmental controllers, it is the better choice. Because a monocyclone does not need a connection for a trigger. ☘️ ✨2 - A monocyclone ensures occupational safety.⚠️ In the event of a filter breakdown in filter cabins, the ventilation ducts can be blocked with powder paint. This blockage can cause a fire. Mono cyclones avoid this possibility. ✨3 - Green Technology. ♻️ Drilling your filters into filter booths creates a situation where paint is sprayed into your paint shop. Your workshop gets dirty and paint particles fly into the air you breathe. The mono cyclone reduces the pollution in the paint shop and provides a better ecological environment for the health of the employees and for the environment. ✨4 - Provides quick color change⌛ This saves time and paint, as the booth can be cleaned quickly. ✨5 - Economical☀️ Nwedpfx Aeggx E Dsnvsk The mono cyclone bag filters do not require color changes. It offers reusability with its washable feature. ✍️✍️Order the right mono cyclone for your current cabin now. ⚡️⚡️⚡️Our mono cyclones have their own control panels. They are supplied with 2 suction funnels, suction hoses and connecting clamps for connection to your existing filter cabin. ‍⚕️‍⚕️‍⚕️ ►►You can easily mount your mono cyclone with 2 holes on the back wall of your filter cabin. ⭐Follow us for new campaigns⭐ ☀️ 2 YEAR WARRANTY ☀️ ☀️We have CE certificates for all our machines and ATEX certificates for the necessary machines.☀️

Condition: used, Year of construction: 2004, Used IMA model VORTEX 075 stainless steel high share mixer/granulator. - Manufacturer: IMA Njdpfx Aswm Atmjnvewk - Model: Vortex 075 - Vessel capacity: 85 litre total capacity, working capacity min/max 8/40 kg - Vessel lid and outlet valve are pneumatically operated - Includes: local control panel and switchboard Mixing system: - Impeller agitator is driven by 3,0 kW motor, maximum speed 118 rpm - Chopper is driven by 1,5 kW motor, speed 3000 rpm

Condition: like new (used), functionality: fully functional, Year of construction: 2024, operating hours: 75 h, power: 16.92 kW (23.00 HP), fuel type: gasoline, gearing type: hydrostat, Agria 5900 Taifun Professional Hydro equipment carrier Technical details: Kawasaki 2-cylinder four-stroke petrol engine 23hp with electric start Gearbox: stepless hydrostatic drive with single-disk dry clutch Speeds: Forward: 0-7 km/h, Reverse: 0 - 3.6 km/h Steering bar: rubber-mounted and height and side adjustable without tools Steering: power steering (handle active steering) Tires: 23 x 8.50 - 12 AS Standard equipment: tires, service and parking brake, operating hour meter, manual start, electric starter, socket Fuel: unleaded petrol Weight: approx. 221.00 kg Special features: Intuitive steering with minimal effort thanks to Holm active steering Patented easy-control control unit for intuitive control Powerful professional motors guarantee sufficient power for all attachments Portal axle for shifting the center of gravity depending on local conditions and the attachment used Clearly visible even in poor visibility conditions thanks to LED safety lighting Standard support foot for convenient parking of the machine without an attachment Hydraulic safety valve: for secure hold even on steep slopes Optimized air intake reduces Nwjdpfx Anjv Ecdksvsk sucking in of dirt and dust Central parking brake Stepless hydrostatic drive for ideal adjustment of the working speed Robust and low-maintenance construction for continuous use under the toughest conditions Standard with operating hour counter Agria mounting flange for positive and non-positive connection between the base and attachment Powerful motors guarantee fast work with professional attachments Easy movement of the machine even without the engine running by releasing the wheels Possible Attachments Green space management: mowing, mulching, baling and belt rake Soil management: reversing tillers, harrowing Property and path maintenance: weed removal, snow clearing, snow blowing, spreading, sweeping Woodland maintenance: chopping bushes This Agria 5900 Cyclone Hydro tool carrier was built in 2024, has around 75 operating hours and has been used as a demonstration machine to date. The Cyclone is in as good as new overall condition, with minor signs of wear and tear, ready for immediate use. Sold as a used machine with no return, guarantee or warranty. Net price €18,479 // Gross price €21,990 - Inspection / test drive possible - Shipping costs €180 nationwide by freight forwarder! - Financing / leasing can be requested individually for you!

Condition: used, Year of construction: 2021, total height: 1,800 mm, total length: 1,200 mm, total width: 1,000 mm, overall weight: 150 kg, hose length: 10,000 mm, space requirement height: 1,800 mm, space requirement length: 1,200 mm, space requirement width: 1,000 mm, transport length: 1,200 mm, transport width: 1,000 mm, transport height: 1,800 mm, tank capacity: 50 l, No. 04521 Cyclone pre-separator ESTA ZA 50 Unused, year of construction 2021, in new condition Filter relief for very large amounts of dust The stationary cyclone pre-separators are installed upstream of the actual filter unit and are used to pre-separate dry and free-flowing dusts. Medium and coarse dust particles are already separated in advance so that only the fine dust still needs to be filtered. This reduces the operating costs of the entire extraction system. Cyclone pre-separators achieve a separation efficiency of more than 90% with an average particle size of at least 150 microns. Top cyclone diameter 282 mm Cyclone height 1458 mm Dust container 50 liters Top connection pipe diameter 50 mm Container connection pipe diameter 82 mm Including approx. 10 m suction hose, diameter 50 mm Transport dimensions approx. 1200 x 1000 x 1800 mm LWH Weight approx. 150 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Nedpfx Aox Upqhenvswk Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: as good as new (ex-display), I will sell a mill with a rotor from Retsch Condition as new. The mill with a rotor TWISTER was designed specifically for preparing a food sample (e.g. feed) for NIR analysis. The optimal shape of the rotor and grinding chamber leads to the generation of an air stream that transports the ground material to the integrated cyclone with a sample bottle. The air stream protects the sample from heating, which means grinding without losing moisture. Supplied with the device, they guarantee optimal grinding, so there is no need to recalibrate the NIR spectrometer. It is possible to choose one of three rotor speeds to perfectly adapt the device to the application requirements. Cleaning the mill is quick and easy because the air flow leads to the complete removal of material from the grinding chamber. This is another RETSCH cyclone mill that guarantees the highest level of sample preparation and reproducible milling results for NIR analysis, making the analysis itself reliable and its results repeatable. APPLICATION EXAMPLES feed, corn, pasta, feed, pharmaceutical products, rice, soy, tobacco, cereals, ... PRODUCT ADVANTAGES ideal for grinding feed, cereals, grains and other similar products 3 adjustable speeds cyclone separator with 250 ml bottle for quick sample collection no sample contamination thanks to easy and quick cleaning convenient control panel 900 W long-life motor Applications grinding for NIR analysis Fields of application medicine / pharmacy, agriculture, food / feed Input material fibrous, soft Principle of operation pressure, friction Input size* < 10 mm Final fineness* < 250 µm input size / material quantity* < 250 ml Speed setting 10 rpm Rotor speed 52 / 62 / 72 m/s Njdpfx Anjrvxqxjvswk Rotor diameter 98.5 mm Sieve sizes 1 mm / 2 mm Drive linear motor Drive power 900 W Electrical data various supply voltages Mains connection 1-phase W x H x D in closed position 449 x 427 x 283 mm Net weight kg Standards / Standards CE

Condition: used, Specifications: Speed 200 to 2500rpm Orbit diameter 4.2mm Nwodpfoylwifox Anvsk Dimensions (w x d x h) 135 x 215 x 78mm Net weight 3.2kg Good working condtion. Please check out our other listings as well.

Year of construction: 2008, condition: like new (used), PERISSINOTTO 45Kw pump. Production 25 cubic meters / hour Nodou Avu Ujpfx Anvjwk No.2 dryer screen vibrators are missing, we can supply them new, price separately.

Condition: ready for operation (used), Year of construction: 2023, operating hours: 1,809 h, total width: 2,000 mm, total height: 1,800 mm, overall weight: 1,650 kg, controller manufacturer: SIEMENS, controller model: S7 with SIMATIC HMI Touch Panel, product length (max.): 2,400 mm, Circular Metal Saw manufactured in 2023. This PRESSTA EISELE PROFILMA 502 features a powerful 7.5 kW saw drive with a maximum saw blade speed of 2,850 rpm. It offers a cutting capacity of 270 x 150 mm and a maximum profile width of 270 mm. The machine includes a Siemens S7 control system with a touch panel for enhanced operation. If you are looking to get high-quality cutting capabilities, consider the PRESSTA EISELE PROFILMA 502 machine we have for sale. Contact us for further details. Technical Specifications • Saw Drive Power: 7.5 kW (7,500 W) • Duty Cycle: S6 • Saw Blade Speed: Max. 2,850 rpm • Power Supply: 400 V, 3-phase, 50 Hz • Current Consumption: 16 A • Operating Pressure: 6–8 bar Cutting Capacity • Maximum Cutting Width: 270 mm • Maximum Cutting Height: 150 mm • Maximum Cutting Diameter: 270 mm • Maximum Round Material Capacity (90°): 190 mm • Maximum Profile Width: 270 mm • Section Length Range: 3–4,000 mm • Minimum Remnant Length: From 75 mm (depending on profile) Saw Blade • Saw Blade Diameter: Ø550 mm • Saw Blade Bore: Ø40 mm Control System • PLC: Siemens S7 • HMI: SIMATIC Touch Panel • Controller: CPU 315 • Safety System: Flexisoft • Functions: • Piece counter • Batch multiplier for bundle processing • Cycle time display • Chain dimension management • Fault diagnostics Connectivity • Remote Access: IXON router with VPN connection Material Feed System • Drive Type: Electronic servo drive • Feed Stroke: 800 mm • Drive Mechanism: Ball screw spindle • Maximum Profile Length: 4,000 mm • Feed Support: Lift/lower roller support Saw Feed • Feed Type: Motorized • Feed Adjustment: Stepless • Cutting Direction: Bottom to top Clamping System • Type: Pneumatic horizontal and vertical clamping • Clamping Position: Feed and discharge sides • Pressure Control: 6 individual pressure regulators Nwsdpfx Anszi S R Rovjk Lubrication • Lubrication Type: Intermittent spray system • Reservoir Capacity: 1 L • Features: • Level monitoring • Automatic shut-off Safety Features • Complete safety enclosure • Sound-insulated machine frame • Automatic machine shut-off at end of material stock • Cutting gap extension to protect cut surfaces Material Support • Infeed Conveyor: 740 mm roller conveyor with intrusion guard • Outfeed Table: 450 mm Pertinax support table with intrusion guard Extraction • Extraction Ports: 2 × Ø100 mm Chip Extraction Unit • Model: MG 3 (Italyvacuum Vortex 58 FT) • Year of Manufacture: 2022 • Motor Power: 3 kW • Voltage: 400 V / 3~ (±5%) • Current Consumption: 7.2 A • Weight: 130 kg • Features: • Integrated cyclonic separation system • Contactless antistatic system Additional Information • Machine can be inspected under power.

Condition: used, 2021 VetterTec 304L Stainless Steel Spray Drying & Flash Drying System Approximately 500 kg/hr evaporation rate with 316L stainless steel pressure nozzle atomizer Spray Chamber dimensions: 11'6" dia. x 28'8" high Cyclone dimensions: 4'3" dia. x 21' high Bag Filter dimensions: 9'8" dia. x 28' high Designed for combustible powder service Drawings available via Dropbox Link Additional Information: The primary dryer is a VetterTec 138-inch diameter pressure-nozzle spray dryer with dehumidified inlet air, cyclone recovery, pulse-jet baghouse, and exhaust fan. It is paired with a 12-inch flash dryer polishing system for finishing moisture removal and product conditioning. Spray Dryer approximate evaporation rate: 500 kg/hr Flash dryer water removal: approximately 75–150 kg/hr Dry solids handling: 150–500 kg/hr, depending on product density and moisture Chamber Diameter: Ø3505 mm (138 in) I/S Chamber Height: Cylindrical section ≈ 3968 mm (156 in), Cone section ≈ 2679 mm (105 in) Approximate vessel height: 6.6 m (21.8 ft) Chamber Volume ~47 m³ Chamber Height ~6.65 m Atomizer: Single pressure nozzle (316L stainless steel) Airflow Pattern: Co-current, 10,000–18,000 m³/hr Cyclone Diameter: 1295 mm (51 in) Cyclone Weight: 1200 kg Rotary Valve: 8 in Construction AISI 304L Sanitary Components: FDA silicone gaskets, tri-clamps Design Temp: 200°C Design Pressure: +0.3 barg Design Vacuum: -20 mbar Nwodpfjzunvaex Anvjk Estimated Evaporation: 450–600 kg/hr Bag Filter: - Pulse-jet cleaning system - Solenoid manifold - Pulse header - Blow tubes - Explosion vent panel - Vibrator - Rotary valve discharge

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Njdszw H Rujpfx Anvjwk Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler

Condition: new, Year of construction: 2026, functionality: fully functional, Plastic processing line/installation or stand-alone machines for various applications. 1) Single-shaft shredder/mono-rotor shredder (various sizes), 18.5 kW or 30 kW Nwjdpfx Aszv S Hronvek 2) Conveyor belt with head pulley magnet or discharge screw, discharge height 2 meters 3) Grinding mill/crusher, 1000 series, 45 kW 4) Discharge system with silo/cyclone, blower, and big bag system/frame, and double outlet (stainless steel), outlet height 2.3 meters. In stock, viewing and testing possible by appointment. Machines and equipment can also be purchased separately. Call us or send an email. For information: Please include your first name, last name, company name, and valid phone number in all requests.

Condition: new, mileage: 1 km, power: 425 kW (577.84 HP), fuel type: diesel, tire size: 325/95 R 24, axle configuration: 6x6, wheelbase: 42,000 mm, fuel: diesel, fuel tank capacity: 390 l, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 16, emission class: euro3, suspension: steel, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, electric window regulation, power assisted steering, retarder, traction control, - Autoradio - CD - Power windows front - PTO - Sun visor - Tool box - Transportation - Twin wheels - Xenon headlights The Mercedes-Benz Arocs 4058 AS 6x6 heavy-duty tractor is for sale and configured for specialised transport operations where maximum traction, pulling capacity and drivetrain durability are essential. Powered by the 15.6-litre Mercedes-Benz OM473 EURO-3 engine producing 578 HP and 2,800 Nm of torque, this permanent 6x6 tractor combines Mercedes PowerShift 3 with a reinforced heavy-duty drivetrain, Turbo Retarder Clutch and Grounder off-road specification. With a gross vehicle weight of 40,000 kg and a gross train weight of up to 180,000 kg, this Arocs is designed for heavy haulage, mining transport, low-loader operations and demanding project logistics. Heavy-duty coupling equipment, factory PTO and N3G off-road classification further increase its versatility. Available through Schaften Automotive for worldwide export. QUICK HIGHLIGHTS ✔ Mercedes-Benz Arocs 4058 AS Heavy-Duty Tractor ✔ Permanent 6x6 All-Wheel Drive ✔ Mercedes-Benz OM473 15.6L EURO 3 Engine ✔ 578 HP (425 kW) ✔ 2,800 Nm Torque ✔ Mercedes PowerShift 3 ✔ PowerShift Advanced ✔ Turbo Retarder Clutch ✔ Gross Train Weight up to 180,000 kg ✔ Grounder Off-Road Specification Nwjdpfxjy Rt Nmj Anvek ✔ N3G Off-Road Vehicle Classification ✔ Heavy-Duty JOST JSK38C 3.5" Fifth Wheel ✔ 36-Tonne Fifth-Wheel Mounting Plate ✔ Factory Mercedes-Benz PTO ✔ Heavy-Duty Front & Rear Coupling Equipment ✔ ClassicSpace L-Cab with Sleeper Bed 578 HP Mercedes-Benz OM473 for Heavy Transport Heavy transport requires more than high engine output. The Mercedes-Benz Arocs 4058 AS is powered by the proven 15.6-litre Mercedes-Benz OM473 inline six-cylinder diesel engine, producing 425 kW (578 HP) and 2,800 Nm of torque. Combined with Turbocompound technology and a EURO 3 emission configuration, the OM473 provides the pulling power required for heavy trailers, specialised transport combinations and demanding project operations. Mercedes PowerShift 3 with PowerShift Advanced manages power delivery through the G 280-16 transmission, while the Turbo Retarder Clutch provides additional support during heavy starting, manoeuvring and controlled operation with high combination weights. Permanent 6x6 Grounder Configuration Traction becomes critical when heavy transport leaves paved roads. This Arocs uses a permanent 6x6 drivetrain with a Mercedes-Benz VG 2800 transfer case, front differential lock and heavy-duty planetary rear axles. The Grounder specification and N3G off-road classification further prepare the truck for demanding operating environments. A 9-tonne front axle, two 16-tonne rear axles and heavy-duty leaf-spring suspension provide the robust chassis foundation required for continuous operation with high loads. Additional construction-site filtration, cyclone dust filtration, elevated air intake and metal headlamp protection help protect the vehicle during operation in dusty, rough and remote environments. Built for Heavy-Duty Trailer & Push-Pull Operations Specialised transport places exceptional demands on the connection between tractor and trailer. The Mercedes-Benz Arocs 4058 AS is equipped with a heavy-duty JOST JSK38C 3.5-inch fifth wheel mounted on a reinforced...

Condition: used, mileage: 238,000 km, power: 350 kW (475.87 HP), first registration: 09/2020, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Year of construction: 2020, Equipment: ABS, air conditioning, navigation system, parking heater, We are very pleased that our offer has aroused your interest and would like to assure you that you can purchase a good and affordable vehicle with a traceable service history at our company! Special equipment: Storage compartment above the windshield with a cover, front axle load 9.0 t, trailer brake 2-line, audio system: digital radio DAB / DAB+, step with handrail on the roof, CB radio, air horn, cab: steel-sprung, comfort, suspension: rear springs 2x13.0 t, suspension: front springs 9.0 t, 4 leaves, remote online function, speed limiter system, transmission 12-speed - type: G 330-12, rear axle bevel gear 300, hydraulic pump (Meiller pump - 7 pistons - 275), automatic climate control, comfort telephony (Bluetooth) with inductive charging cradle, mudguards, rear axle, aluminum, air intake behind the cab, air filter: cyclone air filter, reinforced engine brake, navigation system, frame overhang 800 mm, smoker's package, retarder, reversing warning audible (warning signal outside), rear window, lower bunk, rear cross member reinforced, interface for fleet management system, drawers under the dashboard, circuit breaker, seat cover / upholstery: passenger seat velour, seat cover / upholstery: driver's seat velour, seats in the cab: driver's seat with massage function, seats in the cab: driver's seat comfort suspended seat, seats in the cab: driver's seat backrest foldable, sun visor outside, steel rims 11.75x22.5 (on the front axle), 24V socket in the passenger footwell additionally, underride guard at the rear foldable, preparation for auxiliary headlights, preparation for cooler box / refrigerator, auxiliary heater (water) Other equipment: Njdpfezwbc Ejx Anvewk Emission standard EURO 6, axle configuration: 6x4, approach / front mirrors heated, trailer socket 24V / 15-pole, Arocs 5, exhaust to the right outside, battery 170 Ah, batteries arranged side by side, cockpit multimedia, compressed air connection in the cab, compressed air tank steel, compressed air unit with condensate monitoring, compressed air unit medium, automatic switching for headlights (light sensor), cab: cab step movable, cab: tilting device hydraulic, cab: M ClassicSpace, 2.30 m, tunnel 170 mm, cab version: ClassicSpace, cab floor with engine tunnel 170 mm, cab: width 2.30 m, cab: height 600 mm, cab version: M, storage flap outside left, storage compartments with cover behind the driver and passenger seat, suspension: leaf / leaf, electric window lifter, windshield tinted, generator 100 A, urea tank (AdBlue): 60 liters, manual sunroof (steel), body / structure: chassis for tipper, comfort central locking system, fuel tank: 290 liters steel, left, steering power pump unregulated, steering wheel with multi-function, steering oil cooling, air compressor 2-cylinder, air dryer heated, engine 12.8 liters - 350 kW R6 diesel (OM 471), engine version OM 471, auxiliary drive MB 131-2c, type of use: local transport, wheelbase not defined, wheelbase version 3600 mm, ramp mirrors, waste heat recovery, disc brakes with full protection, disc brakes front and rear axle, key with remote control (2), protection plate under the front bumper, side marker lights LED flashing, seats in the cab: passenger functional seat, stabilizer front axle, steel rims 9.00x22.5, 12V socket in the passenger footwell, front bumper corners in steel design, tachograph / EC control unit, daytime running lights automatic, Truck Data Center 7 (fleet management system), preparation for toll collection

Condition: used, Year of construction: 2019, operating hours: 500 h, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, Shredding/chipping machine Vecoplan VHZ 1300, hammer mills CPM, fan and cyclone filter JFK. The machine is in good condition and has only been in operation for approximately 500 hours. The line is complete with all conveyors. Nsdsympx Uopfx Anvswk

Year of construction: 2003, condition: ready for operation (used), Plastic processing machine manufactured in 2003. This DREHER S 42/65 GFS-15 GR features a powerful 45 kW drive motor and a working width of 650 mm. It includes a protective soundproof enclosure and a granulator function, along with various additional equipment such as a Z-conveyor belt and a discharge extraction station. If you are looking to get high-quality plastic processing capabilities, consider the DREHER S 42/65 GFS-15 GR machine we have for sale. Contact us for further details. Nedezwg Efspfx Anvswk - Drive Power: 45 kW- Motor Speed: 1,470 rpm- Motor Specifications: VEM motors GmbH, 45 kW, 400/690 V, 50 Hz- Rotor Diameter: 420 mm- Working Width / Rotor Width: 650 mm- Feed Opening: approx. 420 × 650 mm- Rotor Cutting Bars: 5 pieces- Stator Cutting Bars: 2 pieces- Enclosure / Features: Protective / soundproof enclosure, granulator function - Additional Equipment & Accessories: - Rotor Feature: Auxiliary flywheel fitted- Soundproof Booth: Segmented steel construction with 100 mm mineral wool insulation, forced ventilation fans, 3 access doors- Discharge & Extraction Station: Granulate extraction fan (5.5 kW motor, 230/400 V), cyclone ZA 160 with pneumatic material diverter, dust filter- Spare Parts: 1 extra set of cutting blades (5 rotor cutting bars, 2 stator cutting bars)

Condition: like new (used), functionality: fully functional, power: 242 kW (329.03 HP), gearing type: automatic, fuel type: diesel, color: yellow, operation weight: 24,200 kg, tire condition: 90 %, shovel volume: 4.2 m³, Year of construction: 2024, operating hours: 505 h, Equipment: UVV, additional headlights, air conditioning, all wheel drive, cabin, low noise, Hyundai HL970A Year of manufacture: 2024 Operating hours: approx. 505 Cyclone pre-air filter Cab air compressor Standard brake accumulator Safety boom lock Remote-controlled door 4 front LED cabin lights Voltage converter 24V LED beacon 360° surround view monitor (AAVM) Radar LED driving lights LED combination lights Second monitor Single brake pedal Piping for 3rd hydraulic circuit Bekamax central lubrication system Piping for quick coupler Joystick steering Standard lifting frame With emergency steering Ride control 5-speed transmission (torque converter) Quick coupler ISO SW (Volvo mount) Triangle TB5 radial tires Transmission underguard Nwjdpfx Ansyr Scyovok Control valve block (MCV) with 3 sections Air-suspended, heated seat Hydraulic oil - VG46 Accelerator pedal with ECO switch Without Bmair filter system Standard paint finish Fingertip 3-slider, electric Rear window roller blind Wheel chock Axle cooling - front & rear Hydraulic differential Rear axle without differential lock Universal bucket 4.2 m³, bolt-on cutting edge Standard bucket 4.6 m³ with teeth available at extra cost

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, Turning / milling center with counter spindle with 10 CNC axes (X1, X2, Z1, Z2, Y1, Y2, B1, B2, C1, C2) Control: FANUC 31:iA Main Spindle Power: 15/11 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Nwjdpfxezvx T So Anvjk Counter Spindle Power: 11/7,5 kW bar material dia.: 51 mm spindle revolution: 5.000 min-1 Turning and milling spindle Power: 7,5/3,7 kW Turning and milling spindle speed: 12.000 min-1 max. rotation length turret bottom: 1.005 mm Slide cross X1 / X2 / Z1 / Z2 / B2: 455 / 222,5 /1.090 / 1.005 / 1.008 mm Slide cross Y1 / Y2: +/- 70 / +20, -50 mm Swivel range B1 axis: +/- 95 ° Linear rack magazine incl. support robot CNC support steady rest Coolant cyclone filter system incl. 2 pcs. coolant pumping spindle oil cooler