Used Doosan Dnm 5700 for sale (486)

Condition: used, Heating fan, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating coil -Handover: in its current condition as inspected -Fan motor: missing -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 -Power: kW -Fan: missing Fpjdpfx Afovrdr Noujn -Operating pressure: max 10 bar -Dimensions: 800/710/H740 mm -Weight: 27 kg

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1985, machine/vehicle number: 3ROLL 4000 X 6 MM, roller (bottom) diameter: 300 mm, roller diameter: 310 mm, roller length: 4,050 mm, working width: 4,000 mm, sheet thickness steel (max.): 6 mm, sheet thickness aluminum (max.): 6 mm, sheet thickness copper (max.): 6 mm, overall weight: 11,000 kg, total length: 5,700 mm, total width: 1,500 mm, total height: 1,700 mm, type of input current: three-phase, working length: 4,000 mm, Equipment: documentation/manual, emergency stop, 3 ROLL PLATE BENDING MACHINE WITH PREPINCHING capacity plate roll 4000 x 6 mm Plate width 4000 mm Fjdpfxjvn I Hcs Afuspn Thickness plate rolling 6 mm Pyramid 3 rolls with pre-pinch cylindrical plate rolling Conical plate rolling Rollers surface length 4050 mm Top roll 310 mm Side rolls 300 mm Datasheet power rollers rotation 15 Hp -3 rolls driven rotation with gear unit power bending- prebend side lower rollers 7,5+7,5 Hp Cene bending attachment rollers tiltable for plate conical forming - hardened contrast pad roller type Hydraulic open front drop-end , top-roll tilt-up wide opening for unloading Console electric on wheels, electric push buttons commands remote Digital readouts rollers position repetability safety and emergency installiton machine in working condition dimension 5700 x1500 x H1700 mm weight 11 Ton

Condition: new, Year of construction: 2025, Planer: Working table dimensions 400 x 1800 mm Cutting block diameter 70 mm Shaft rotation speed 5700 rpm The dimensions of the knives 400 x 20 x 3 mm Max. 4 mm table adjustment Thicknesser: Working table dimensions 400 x 760 mm Fsdog S Nx Dopfx Afuepn Feed speed 7 m / min Working height 4 - 220 mm Bohring agregate: Working table dimensions 250 x 500 mm Longitudinal / transverse / vertical travel 205/95/90 mm Spindle (M18 * 1.5-S) 0-16mm General parameters: Three-phase motor power 4.0 - 3.0 HP - KW Weight 410 kg Machine has spiral roller Machine is extremely efficient and accurate. The cast iron structure of the body allows for safe and effective processing of even large elements.

Condition: new, Year of construction: 2025, Planer: Working table dimensions 400x1800 mm Cutting block diameter 70 mm Shaft rotation speed 5700 rpm The dimensions of the knives 400x20x3 mm Max. 4 mm table adjustment Thicknesser: Working table dimensions 400x760 mm Feed speed 7 m / min Working height 4-220 mm General parameters: Three-phase motor power 4.0 - 3.0 HP - KW Weight 380 kg The cast iron structure of the body, the exact limiter of the cross cut and the excellent quality of workmanship allow to achieve the best machining results. Machining is extremely efficient and accurate. The cast iron structure of the body allows for safe and effective processing of even large elements. Fodpog S N Agefx Afuopn

Year of construction: 2007, condition: as good as new (ex-display), “UNUSED – Schenck SLG 2.500 x 5.700 mm“ for Sale Find our complete stock on our website. Manufacturer: Schenck Type: SLG Size: 2.500 x 5.700 mm Deck: 1 Fert. No.: VO35406.A01 Year of Manufacture: 2007 Fodeglvw Ijpfx Afuopn

Condition: used, mileage: 1,064,970 km, power: 294 kW (399.73 HP), first registration: 09/2002, fuel type: diesel, empty load weight: 10,900 kg, maximum load weight: 7,100 kg, overall weight: 18,000 kg, tire size: 315 / 60 R 22,5, axle configuration: 4x2, wheelbase: 5,700 mm, brakes: constant throttle, color: green, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro3, suspension: steel-air, total length: 9,400 mm, total width: 2,550 mm, total height: 4,000 mm, loading space volume: 49 m³, loading space length: 7,000 mm, loading space width: 2,430 mm, loading space height: 2,900 mm, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, low noise, parking heater, seat heater, tail-lift, Vehicle location: Bovenden, Lg. House, high roof, 1x comfort seat, 2x recliner, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, radio, cruise control, center console, electric roof, auxiliary heating, switch 16, ABS (anti-lock braking system), constant throttle, lifting+lowering, differential lock, air-suspended, low-noise G1, portal doors, storage box, tail lift aluminum, upright Wheelbase: 5700 mm Body: Summer body with intermediate floor adjustable from 1,400 to 1,850 mm Loading lift Dhollandia 1000kg ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Fodpfx Afsvhg T Ieujpn - .

Condition: good (used), fan heater, heater, heat exchanger, air heater, air heater, duct air heater, duct air heater, heating register -Manufacturer: Kampmann, air heater heat exchanger -Type: Tip 5000 2-stage 157000573036 -Power: 11.4/14.7 kW -Fan: Ziehl-Abegg -Operating pressure: max 10 bar -Number: 2x air heaters available Fpedpou Scqhsfx Afusn -Price: per piece -Dimensions: 800/710/H730 mm -Weight: 49 kg/piece

Condition: new, Type 400C Surface planer: Table dimensions 400х1800 mm Cutterblock diameter 70 mm Cutterhead rotating speed 5700 rpm 3 knives 400x20x3 mm Max table adjustment 4 mm Thickness: Table dimensions 400x760 mm Max cutting depth 4 mm Fpjdpfx Asd Nl Sfjfuon Feed speed 7 m/min Cutterblock rotation speed 5700 rpm Max working height 220 mm Min working height 4 mm Mortising: Table dimensions 250х500 mm Longitudinal stroke 205 mm Trasversal stroke 95 mm Chuck (SX) 16 mm Chuck rotation speed 5700 rpm Motor 3 kW Accessories: service wrenches, guards on mortise chuck, planer guide. Weight 390 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, turning diameter over cross slide: 350 mm, turning length: 300 mm, turning diameter: 280 mm, spindle bore: 53 mm, spindle speed (max.): 5,000 rpm, spindle speed (min.): 5 rpm, travel distance X-axis: 160 mm, travel distance Z-axis: 330 mm, spindle motor power: 11,000 W, rapid traverse X-axis: 20 m/min, rapid traverse Z-axis: 24 m/min, total height: 1,550 mm, total length: 2,050 mm, total width: 1,600 mm, overall weight: 3,200 kg, bar passage: 45 mm, chuck outer diameter: 203 mm, bar diameter (max.): 45 mm, controller model: Mitsubishi M50, Doosan Puma 240C CNC Lathe Available for sale is a production-ready Doosan Puma CNC Lathe. This machine is a highly reliable shop workhorse featuring a solid, single-piece cast iron bed with traditional box guideways for heavy-duty cutting and superior vibration dampening. Equipped with the factory Big-Bore package, this lathe pairs a large chuck capability with an expanded through-hole bar capacity, making it an ideal choice for high-mix job shops and heavy-duty turning applications. Key Machine Characteristics * Chassis Construction: Engineered with wide box guideways that offer exceptional tool life and heavy dampening for aggressive roughing cuts on tough alloys. * Bar & Chuck Capacity: Upgraded spindle configuration that allows the machine to process significantly larger raw bar stock than standard models in its class. * Compact Footprint: Delivers maximum frame rigidity and heavy cutting power without taking up excessive shop floor space. * Control System: Powered by a highly dependable and industry-standard Fanuc operating platform known for its stability and ease of programming. Fpedpfx Ajzluudofusn * Versatility: Perfectly balanced for short-to-medium length workpieces requiring high torque and consistent dimensional accuracy.

Condition: used, mileage: 1,400 km, power: 43 kW (58.46 HP), first registration: 07/2008, fuel type: diesel, overall weight: 4,900 kg, color: orange, gearing type: mechanical, suspension: other, operating hours: 1,400 h, Equipment: air conditioning, all wheel drive, HU/AU new, 08.07.2008 1,400 operating hours 43 kW 2,746 cm³ industrial front loader Diesel All-wheel drive Cabin Air conditioning Hydraulic shuttle Turf tires Agricultural tires possible Permissible total weight 4,900 kg FOR US, CONDITION AND GUT FEELING ARE DECISIVE, PRICE IS SECONDARY. For further questions, Mr. Faller will be happy to assist you at the following number. //*TRADE-IN, PART EXCHANGE OR LEASING OF YOUR VEHICLE, AS WELL AS FINANCING POSSIBLE! All information provided without guarantee* More offers can be found on our homepage: The description and stated data do not constitute a binding agreement and are not guaranteed. The only legally binding document is the purchase contract concluded at the dealership. Subject to errors and prior sale! Fpedpfsvidc Aex Afuen

Year of construction: 2020, operating hours: 1,133 h, condition: used, LIAB Grabenmeister GM4 tracked trench cutter, year of manufacture: 2020, hours: only 1,133, cutting width: 70-450 mm, cutting depth: 300-1,500 mm, engine: Doosan [57 kW/79 hp], hydraulic crawler drive, adjustable undercarriage, transport speed: 6 km/h, 300 mm steel track with rubber padding, weight 4,400 kg, length: 5,800 mm, width: 2,000 mm, height: 2,300 mm, in good condition!, ready for immediate use! Upon request, we will provide you with a leasing or financing offer. Mr. Mihm (Tel. ) will be happy to assist you. You can find further information on our website. Errors and prior sale excepted! = Further Information = Fpedpfsy T Uvmsx Afuen Please contact Tobias Ebert for more information.

Condition: used, Technical details: x-Travel: 530 mm table cross travel (Y-axis): 5200 mm w-axis: - mm drilling depth in one stroke: ca. 4000 mm metrical thread cutting: 0,25 -560 M total power requirement: 35 kW bed width: 560 mm centre distance: 5700 mm centre height: 500 mm swing diameter over bed: 1000 mm turning diameter over support: 800 mm range of feed in x - axis: 0,0063 - 4,0 mm/U range of feed in y - axis: 0,0063 - 4,0 mm/U spindle bore: 135 mm range drill spindle revolution per minute: max.1400 U/min range drill spindle revolution per minute: min. 7,1 U/min speed steps work spindle: 24 steps tailstock taper MT: MK 6 tailstock quill stroke: 300 mm dimension machine approx.LxWxH: 12,0 x 2,5 x 2,0 m Fedszxlv Eopfx Afujpn The machine was retrofitted/overhauled in 2007. Special-purpose machine suitable for deep-hole drilling and/or heavy-duty turning operations. Inch thread range: 1/16 – 80 TPI 3-jaw chuck, chuck diameter: Ø 315 mm 2 steady rests Faceplate: Ø 800 mm without jaws PARAT quick-change tool holder, Type 4 3 pices Coolant system HEIDENHAIN PT 880 4-axis DRO Boring bar for deep-hole drilling Drilling head for deep-hole drilling Infinitely variable boring-bar feed Various accessories *

Condition: reconditioned (used), operating hours: 629 h, functionality: fully functional, fuel type: gasoline, empty load weight: 350 kg, HAKO JONAS 900 V Sweeper New air filter Machine usage: only 629 hours Fodsz Dtdfspfx Afuspn New main roller brush (PPL 1.0 + wire) combined with a new side brush (PPL 0.9 + wire) ensures excellent sweeping results New 12V 44Ah starter battery Built-in warning light A high-performance dust extraction turbine and new sealing skirts around the main brush prevent fine dust from rising during sweeping. The machine features a large debris flap for collecting larger waste. The unit has undergone a comprehensive, meticulous overhaul; operating fluids and parts—such as bearings, drive belts, and sealing skirts—have been replaced with new ones. Each unit we offer features actual photos; you are buying the exact machine shown. TECHNICAL DATA: Model: Jonas 900 V Engine: Petrol Sweeping width (mm): 700 Sweeping width with side brush (mm): 950 Sweeping speed (km/h): 6 Hopper capacity (l): 60 (2x30) Filter area (m²): 3 Dimensions L x W x H (mm): 1500 x 1000 x 1330 Weight ready for operation (kg): ~350 INCLUDED: NEW air filter NEW main roller brush (PPL 1.0 + wire mix) NEW side brush (PPL 0.9 + wire mix) NEW starter battery (12V 44Ah) NEW roller skirt/seals Built-in warning light Waste hoppers (2x 30L) KEY FEATURES: Ergonomically designed cockpit and centrally positioned operator seat ensure excellent visibility of the cleaning area. The Jonas 900 V sweeper is the perfect machine for efficient, cost-effective sweeping of multi-level car parks, warehouses, production facilities, and outdoor areas. Petrol engine ensures high operational flexibility. Wide working width (950 mm) ensures high area coverage/productivity. Clear and intuitive control panel.

Condition: good (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 06-13795, Technical characteristics: Work Area: - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece: - Maximum nominal module (in steel with tensile strength approx. 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity: - Maximum table load (including fixtures): 150 kg - Maximum force exerted by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): ~45° Cutter Spindle: - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment: - Operating voltage: 400 - 480 V - Control voltage: 24 V - Magnetic voltage: 24 V - Cable cross-section: 16 mm² - Connected power: 15 kW - Protection: 50 A Dimensions: - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm Fodpfx Afexwlmusuopn - Weight: 5700 kg Main Features and Capabilities: - Vertical design: Optimal chip evacuation and easy loading/unloading - CNC control: Siemens Sinumerik 810D/840D - High precision: Positioning accuracy via Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or rotation zero-point definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor Machine status: Operational (WORKING)

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 06-13796, Technical characteristics: Work Area - Elevation: 160 mm - Minimum center distance between table axis and spindle: -30 mm - Maximum center distance between table axis and spindle: +150 mm - Minimum distance between table surface and cutter spindle: 275 mm - Maximum distance between table surface and cutter spindle: 345 mm - Manual transverse displacement of the column: ±20 mm - External diameter: 250 mm - Bore diameter: 100 H7 mm Workpiece - Maximum nominal module (in steel with a tensile strength of approximately 600 N/mm²): 3 mm - Minimum pitch diameter (internal gearing): 60 + d0s mm - Maximum external diameter (internal gearing): 280 mm - Maximum width of the toothed band: 42 mm - Maximum stroke length for tooth cutting: 50 mm - Maximum spindle travel: 70 mm Load Capacity - Maximum load on the table (including fixtures): 150 kg - Maximum force applied by the tailstock: 1,500 kg - Maximum achievable helix angle (hydrostatic guide): approx. 45° Cutter Spindle - External diameter: 85 mm - Cutter holder bore: 45 H3 mm Electrical Equipment - Operating voltage: 400 - 480 V, Control voltage: 24 V, Magnetic voltage: 24 V, Cable cross-section: 16 mm² - Connected power: 15 kW, Protection: 50 A Dimensions - Overall dimensions: Length = 2980 mm, Width = 1650 mm, Height = 2165 mm - Weight: 5700 kg Fedpexwl N Ajfx Afuepn Main Features and Capabilities: - Vertical design: Ensures optimal chip evacuation and easy loading/unloading. - Control: Siemens Sinumerik 810D/840D - High Precision: Positioning accuracy by Heidenhain linear scales - Measuring system: Marposs T25 (for angular alignment or zero-point rotation definition) - Oil filtration and cooling system - Magnetic chip extraction conveyor

Condition: used, mileage: 575,000 km, power: 235 kW (319.51 HP), first registration: 09/2015, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 9,883 mm, loading space width: 2,484 mm, loading space height: 2,286 mm, Year of construction: 2015, Equipment: ABS, air conditioning, tail-lift, Manufacturer Scania Model P320 6x2?4 Carrier Supra 1250 Mt 9.80 m. Refrigerator truck Year 2015 Condition Good Serial Number YS2P6X20005392286 Ref. nr. 768012 Reg. date: 11-09-2015 Engine: D9 Hk: 320 Km: 575000 Gearbox: Opticruise (GR875) Eurotype: 6 Diesel tank: 1 Tank liter: 400 L Rear view camera: ? Cabin heater: ? Air conditioning: ? Cabin type: CP14L Navigation: ? Radio: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 315/70R22.5 Cover% left 40% 30% 70% Front suspension: Springs Suspension rear: Air Wheelbase: 5700 mm Total weight: 26000 Kg Net weight: 13050 Kg Load capacity 12950 Kg Inside length: 9883 mm Internal width: 1658 + 826mm Interior height: 2286 mm Lift Brand: Zepro Lift capacity: 2500 Kg Remote control: ? Refrigerator brand: Carrier Supra 1250 Mt Fpodsxu Tawopfx Afuon Refrigerator year: 2015 Engine hours 12602 Double compartment: ?

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2021, operating hours: 3,269 h, load capacity: 2,500 kg, lifting height: 3,670 mm, fuel type: gas, mast type: telescopic, construction height: 2,480 mm, motor manufacturer: Doosan, fork length: 1,200 mm, tire condition: 80 %, front tire type: superelastic tires (black), front tire size: 23x9-10, rear tire type: superelastic tires (black), rear tire size: 21x8-9, overall weight: 4,113 kg, total height: 2,480 mm, total length: 2,650 mm, total width: 1,200 mm, fuel: liquid petroleum gas (LPG), motor model: PM02V, Equipment: sideshift, STILL RX 70-25 T – LPG forklifts TECHNICAL DATA Lifting capacity: 2.500 kg Lifting height: 3.670 mm Closed height: 2.480 mm Mast: Standard (2W367) Fork length: 1.200 mm Fork carriage: FEM 2A Drive: 4-Zyl. Treibgas Engine: Doosan PM02V Tyres: Superelastik 23x9-10 (80%) / 21x8-9 (50%) Service weight: 4.113 kg Length: 2.650 mm Width: 1.200 mm Year of manufacture: 2021 Operating hours: 3.269 h Condition: working condition EQUIPMENT 3rd valve, 4th valve, Rear work lights, Front work lights Fsdpfx Afoz Aqgqouopn ATTACHMENTS Sideshift Internal no.: 1202041 Location: 14974 Ludwigsfelde bei Berlin Unilift GmbH & Co. KG – inspected used forklifts from Ludwigsfelde near Berlin.

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 235 h, load capacity: 230 kg, mast type: telescopic, lifting height: 15,700 mm, lifting power: 230 kg/m, platform length: 760 mm, platform width: 1,550 mm, overall weight: 7,112 kg, empty load weight: 6,882 kg, transport length: 6,500 mm, transport width: 1,700 mm, transport height: 1,980 mm, construction height: 1,980 mm, fuel type: hybrid, fuel tank capacity: 50 l, tire size: 240X55 D17,5, tire condition: 100 %, drive condition: 100 %, wheelbase: 2,050 mm, ground clearance: 160 mm, color: orange, 🚀 JLG M450AJ HYBRID | 2017 | 235 Hours | Articulating Boom Lift 🔹 JLG M450AJ Hybrid articulating boom lift for sale, in excellent technical and cosmetic condition. This 2017 machine has exceptionally low operating hours, only 235 hours from new. Following a comprehensive technical inspection, it is fully operational and ready for immediate use without any additional investment. 📋 Technical Specifications 🏭 Manufacturer: JLG 🔧 Model: M450AJ Hybrid 📅 Year of Manufacture: 2017 ⏱️ Operating Hours: 235 hours ⚡ Drive Type: Hybrid (Electric + Diesel) 📏 Working Height: 15.72 m 📐 Platform Height: 13.72 m ↔️ Horizontal Reach: Up to 7.89 m 🏋️ Platform Capacity: 230 kg 🚜 Type: Self-Propelled Articulating Boom Lift ✅ Features and Benefits ✔️ Hybrid drive system – ideal for both indoor and outdoor applications ✔️ Quiet and emission-free operation in electric mode ✔️ Excellent horizontal reach thanks to the articulating boom design ✔️ Proportional controls for precise and smooth operation ✔️ Non-marking tires ✔️ Compact transport dimensions ✔️ Ideal for installation, maintenance, servicing, and construction work 🏭 This machine is perfectly suited for warehouses, logistics centers, industrial facilities, production plants, commercial buildings, and construction sites. Fpsdpoz Itcvofx Afuen ⭐ With only 235 operating hours from new, the machine shows minimal wear and remains in outstanding condition. It is one of the lowest-hour JLG M450AJ Hybrid units currently available on the used equipment market. 🤝 Why Choose FT Logistics? FT Logistics specializes in the sale of forklifts, sideloaders, multidirectional forklifts, warehouse equipment, and material handling machinery. We provide carefully selected equipment, professional technical support, and expert advice to help customers choose the right machine for their specific requirements. 📦 Our inventory includes a wide range of equipment from leading manufacturers, available for immediate delivery. 🌍 Our Services 🚛 Transport arrangements throughout Europe 📄 Assistance with export procedures and documentation 🔧 Technical support 💻 Online machine presentations 📸 Additional photos and videos available upon request 📞 Please contact us for further information, pricing details, or a tailored offer. We offer a wide selection of forklifts, sideloaders, multidirectional forklifts, and warehouse equipment to suit a variety of industries and applications. 🏢 FT LOGISTICS Quality You Can Rely On. Service You Can Trust.

Condition: excellent (used), mileage: 659,732 km, power: 265 kW (360.30 HP), first registration: 04/2012, fuel type: diesel, axle configuration: 8x2, fuel: diesel, color: blue, driver cabin: day cab, gearing type: automatic, emission class: euro5, number of seats: 2, loading space length: 8,350 mm, loading space height: 1,070 mm, Year of construction: 2012, Equipment: ABS, central locking, crane, cruise control, electric window regulation, power mirror, = Additional options and accessories = - Additional steering axle - Air horn - Aluminum fuel tank - Beacon(s) - Radio/CD player - Sun visor - Toolbox = Remarks = Crane Number of hydraulic extensions: 3 Number of support legs: 2 Number of extra functions: 2 Remote control: ✓ Load Hook: ✓ Meter capacity: 10 m Capacity kilo: 5700 kg = More information = General information Number of doors: 2 Cab: single Registration number: 2ESA293 Axle configuration Front axle 1: Steering Front axle 2: Steering Rear axle 1: Double wheels Rear axle 2: Steering Weights Empty weight: 17.370 kg Carrying capacity: 14.630 kg GVW: 32.000 kg Functional Crane: PALFINGER PK 26002, year of manufacture 2012, behind the cab Height of cargo floor: 107 cm Condition Technical condition: very good Visual appearance: very good Financial information Price: On request = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Fedpfoz N H Sujx Afujpn Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2025, operating hours: 1 h, empty load weight: 2,320 kg, Lovol M504C (compact) tractor with cabin, available from stock, leasing also possible! Year of manufacture 2025, NEW, 4-cylinder, 50 HP, STAGE V diesel DOOSAN engine, BLACK EDITION, power steering, front loader lifting capacity 1390 kg (pallet approximately 1000 kg), lifting height 263 cm, extra hydraulic function on the front loader, including Dutch registration (also can be converted for Belgium), side gearshift, reversing gearbox (forward/reverse in all gears with a lever on the steering wheel), super comfortable cabin, LED lighting at the rear, air conditioning, adjustable steering wheel, luxurious sprung seat, gearbox 4 low/4 high, driving speed min/max (km/h) 2.37/38.46, own weight (kg) from 2,320, dimensions L x W x H (mm) 4136x1950x(2657/2822), hydraulic output l/min 40 l/min, double-acting valve 2 pcs, dimensions three-point linkage Cat II, live PTO, PTO revolutions 540/1000, rear lifting capacity (kg) 3520, detachable front loader with Euro quick hitch/bucket and forks, additional cost €4500,- excluding VAT, trade-in and delivery possible, 2-year factory warranty. €26,150,- excluding VAT, Lovol M504C without front loader. €29,350,- excluding VAT, Lovol M504C with front loader as shown. You can already have a Lovol M504C in blue with a 3-cylinder 50 HP Stage V engine for €24,850,- excluding VAT. Lawn tires XL (Galaxy Garden Pro) instead of standard, additional cost €2100,- excluding VAT. Lawn tires XXL instead of standard, additional cost €2685,- excluding VAT. Leasing possible for entrepreneurs: email/message your company registration number (for Belgium, your VAT number) and you will receive a non-binding quote/credit check as soon as possible. (calculation for M504c without front loader) Fpedpfx Afjz N T R Deusn LEASE 60 months €505,- LEASE 72 months €439,- LEASE 84 months €390,-

Condition: used, Year of construction: 2007, Work table dimensions: 3050 x 1240 mm Passage opening: 170 mm Travel range X-Y-Z: 3500 x 1790 x 340 mm Main milling head: Electric spindle with HSK 63 F tool holder Speed range of 600 - 24000 rpm, continuously adjustable via inverter Motor power 8.5 kW from 12,000 rpm (S1) Clockwise/counterclockwise rotation Rotary axis Vector (C-axis): For use with angular gearheads. Angular gearhead Mimatik HSK 63 F Tool changer RAPID 12 (travelling type) Drilling head F11 with grooving unit - 7 independent vertical spindles (4 right and 3 left) - 4 horizontal spindles (1+1 spindles in the X-axis / 1+1 in the Y-axis) Integrated, independent grooving saw unit with saw blade DM 120 mm Work table ALU Vacuum pump 250 cbm/h Power 5.5 kW Max. vacuum (connection) 0.9 bar Control: ESA-GV KVARA 6 with Office PC User interface: Xilog Plus Operating system: Windows XP Fjdpfxjzr H Ivj Afujpn Cable remote control Central extraction port: 200 mm Weight: approx. 2700 kg Space requirement: approx. 5700 x 4100 x 2600 mm without control cabinet Control cabinet 600 x 800 x 1900 mm Storage location: Supplier

Condition: ready for operation (used), Year of construction: 2015, - USED - FIBER LASER CUTTING MACHINE WITH PALLET CHANGER and LOADING/UNLOADING SYSTEM X-AXIS TRAVEL: 4000 mm Y-AXIS TRAVEL: 2000 mm Fpodpfjxqtx Sjx Afuon Z-AXIS TRAVEL: 115 mm RAPID FEEDS X-Y-Z: 245 m/min WORKING AREA: 4000 x 2000 mm ADMITTED LOAD ON TABLE: 1250 Kg SOURCE: TRUDISK 5001 ; 5000 W WEIGHT: 15000 Kg OVERALL DIMENSIONS: 10900 x 5700 x 2400 mm NOTE: LIFT MASTER COMPACT LOADING/UNLOADING SYSTEM

Condition: refurbished (used), Year of construction: 2006, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 625 mm, rapid traverse X-axis: 36,000 m/min, rapid traverse Y-axis: 36,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller manufacturer: FANUC, controller model: Series 0i-MC, spindle speed (max.): 12,000 rpm, spindle motor power: 18 W, BRAND: DOOSAN-DAEWOO MODEL: MYNX NM-510 CATEGORY: VERTICAL MACHINING CENTERS YEAR OF MANUFACTURE: 2006 CNC CONTROL: FANUC Series 0i-MC MACHINE WEIGHT: 7,500 kg MACHINE DIMENSIONS: - Length: 4,165 mm - Width: 2,600 mm - Height: 3,043 mm Spindle Spindle taper: ISO 40 Spindle speed: 12,000 rpm Spindle motor power (cont./30 min): 15 / 18.5 kW Working Capacity X axis: 1,020 mm Y axis: 510 mm Z axis: 625 mm Distance spindle nose – table surface: 150 – 775 mm Distance spindle center – column: 557 mm Table Table dimensions: 1,200 x 500 mm Table load capacity: 800 kg Feed Rates Rapid traverse (X/Y/Z axes): 36,000 / 36,000 / 32,000 mm/min Cutting feed rate (X/Y/Z axes, linear interpolation, max): 8,000 mm/min Tool Changer Tool holder taper: DIN 69871-A40 Shank: DIN 69872-A40 Tool magazine capacity: 30 stations Maximum tool diameter (adjacent tools full/empty): Ø 90 / Ø 150 mm Maximum tool length: 300 mm Maximum tool weight: 8 kg Accessories Coolant tray + high pressure pump (15 bar) with through-spindle coolant Fpsdexxlmwopfx Afusn Chip conveyor Spindle line air conditioner + transformer Manuals, electrical diagrams, and CE Declaration

Condition: used, Year of construction: 2006, DOOSAN DAEWOO PUMA 240 Lathe YEAR OF FIRST INSTALLATION: 2007 CNC FANUC Series 21i – TB IMPECCABLE MACHINE LIKE NEW, CONNECTED Fpedpfx Afoyuqacjusn ANY TEST POSSIBLE CHUCK DIAMETER: 220 mm MAX. SWING OVER BED: 550 mm MAX. SWING OVER CARRIAGE: 390 mm MAX. TURNING DIAMETER OVER BED: 350 mm MAX. TURNING LENGTH FROM CHUCK: 562 mm BAR CAPACITY: 65 mm SPINDLE SPEED: 45 – 4,500 RPM SPINDLE MOTOR POWER: 15 / 18.5 kW TRAVELS: X: 242 mm Z: 580 mm TOOL TURRET: 12 POSITIONS CHIP CONVEYOR TOOL PRESETTER COMPLETE WITH ALL DOCUMENTATION

Year of construction: 2012, condition: ready for operation (used), - USED - WIRE EDM MACHINE WITH AWF X-AXIS TRAVEL: 750 mm Y-AXIS TRAVEL: 500 mm Z-AXIS TRAVEL: 410 mm U/V-AXIS TRAVEL: ± 100 mm RAPID FEEDS X-Y-Z: 1,3 m/min MAX  PIECE WEIGHT: 3000 Kg MAX PIECE SIZE: 1300 x 1000 x 405 mm TABLE SIZE: 1100 x 875 mm DRAFT ANGLE / DRAFT HEIGHT: ± 15 °; 360 mm WIRE SPEED: 0-15 m/min WIRE DIAMETER: 0,20-0,36 mm CONTROL UNIT: MITSUBISHI 3D Advance Fpsdpfoytkdrox Afuen WEIGHT: 5700 Kg OVERALL DIMENSIONS: 3495 x 3143 x 2633 mm NOTE: CNC Z AXIS; WIRE CRUSHER; LINEAR SCALES ON X and Y AXIS; 20 Kg REEL OF THREAD UNIT