Used Doosan Nx 6500 Ii for sale (2,841)

Condition: used, Year of construction: 2015, turning diameter 210 mm turning length 1000 mm control Fanuc 31i max. turning speeds 5.000 min/-1 drive capacity - main spindle 15 kW max. torque 476 Nm bar passage 65 mm x-axis 250 mm z-axis 1050 mm x2-axis 150 mm z2-axis 1030 mm spindle hours ca. 700 h accessories: Lünette, Späneförderer In our opinion, the machine is in very good used condition and can be inspected under power by appointment. Technical details: - approx. 500 spindle hours Accessories: - Steady rest - Chip conveyor Ppedpsxq R Evefx Ag Der Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: excellent (used), Year of construction: 2020, operating hours: 3,833 h, functionality: fully functional, Turning center with infinitely variable swiveling milling head and Y-axis, motorized lower turret and sub-spindle. Manufacturer: Doosan Model: MX 2600 ST Year of manufacture: 2020 Condition: Very well maintained, machine comes from a site closure. Operating times: Control on: 13,127 hours Run time: 3,833 hours Machining time: 2,835 hours The upper head is fed by a tool magazine and can be rotated or milled at various angles. Even highly complex components can be fully machined without additional repositioning. CNC Control: Fanuc 31i-B Swing diameter over bed: 1000 mm Maximum turning diameter: 760 mm Maximum turning length: 1540 mm Pjdpfjywkw Iox Ag Depr Maximum bar diameter (manual/cont.): 76/76 mm Y-axis travel: 230 mm (±115 mm) Chuck (sub-spindle) ASA mount: A2-8 Spindle speed: 4,000 rpm AC motor power (cont./30min.): 22/26 kW Turning/Milling head B-axis rotation / indexing: 240° (±120°) Tool interface: Capto C6 Spindle speed: 12,000 rpm AC motor power (30min.): 15/18.5 kW Number of tools: 40 (Opt. 80) Turret Number of driven tools: 12 (12) Driven tool power: 7.8 kW/30min. Weight: 15.5 t.

Condition: used, DAEWOO PUMA 300 LB (Doosan) 2-axis CNC lathe Ppedpfx Asqfm A Ajg Djr CNC Fanuc 18T Hydraulic tailstock Condition: very good. This machine can be inspected in our warehouse, under power. Mimu machine tools Italy

Condition: used, Torni CNC Doosan Puma TW2600 2016 (low hours) complete with robot it can be inspected in our warehouse in Gussago BS Pjdpfx Asw Slx Ueg Depr

Condition: used, Vertical machining center Daewoo (Doosan) ACE VC500 The machine can be seen working in our warehouse in Gussago BS. Mimu Machine Tools Gussago BS Italy Vertical machining center - 2-pallet Daewoo ACE VC500 CNC Model Fanuc CNC version 18-M Spindle Taper toolholders iso 40 Power spindle 15 Kw RPM 10000 Number of tools 30 X-axis travel 760 mm Y-axis travel 510 mm Z-axis travel 570 mm Changer pallet yes Podpfetzgaqsx Ag Dspr Pallet dimensions 860x560 mm Maximum load allowed 300 Kg Swing type pallet yes High coolant pressure yes Cheap conveyor yes Brand Daewoo Model ACE VC500 Construction year 2000 DIMENSIONS AND WEIGHT Length 3600 mm Width 3700 mm Height 2935 mm Weight 9200 Kg The machining center is a machine tool equipped with numerical control capable of performing multiple mechanical operations with a single set-up on multiple surfaces of the same work piece. It is generally equipped with multiple axes of motion and a automatic tool exchange system and sometimes multiple pallets CNC type: FANUC 18-M Number of pallets: 2

Condition: used, functionality: fully functional, machine/vehicle number: 0039, Year of construction: 2021, operating hours: 849 h, load capacity: 3,000 kg, lifting height: 6,290 mm, free lift: 1,650 mm, fuel type: diesel, mast type: triplex, construction height: 2,850 mm, power: 45 kW (61.18 HP), fork length: 1,200 mm, empty load weight: 5,100 kg, total length: 2,730 mm, drive type: Diesel, construction width: 1,197 mm, Diesel forklift Chassis number: 0039 Pjdpjyvwt Hefx Ag Dspr Load center: 500 ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Condition: Ready for use and fully operational Technical condition: Good Front tires type: Superelastic Front tires condition: 80 - 100% Rear tires type: Superelastic Rear tires condition: 80 - 100% Sideshift, 3rd valve, 4th valve, rear work light, front work light, heater, full cab, CE certificate, safety light, interior mirror, LED,

Year of construction: 2016, condition: ready for operation (used), - USED - 7-AXIS TWIN-SPINDLE CNC LATHE MAX ROTATING DIAMETER: 800 mm MAX TURNING LENGTH: 350x2 mm MAX TURNING DIAMETER: 300 - 390 mm BAR CAPACITY: 76 mm SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 COUNTER SPINDLE: 3500 rpm; 22-26 kW; ASA A2-8 X1-AXIS TRAVEL: 255 mm X2-AXIS TRAVEL: 190 mm Y-AXIS TRAVEL: ± 60 mm Z1-AXIS TRAVEL: 800 mm Z2-AXIS TRAVEL: 900 mm RAPID FEEDS X-Y-Z: 20 - 7,5 - 24 m/min DRIVEN TURRET HEAD: 12 ; 12 POS; 4000 ; 4000 rpm; 5,5 ; 5,5 kW CONTROL UNIT: FANUC 31i-B WEIGHT: 12700 Kg OVERALL DIMENSIONS: 4050 x 2210 x 2480 mm ACCESSORIES: SWARF CONVEYOR ; Ppsdpsyyd Uljfx Ag Der PIECE CONVEYOR ; TOOL SETTER

Condition: ready for operation (used), Year of construction: 2017, travel distance X-axis: 1,050 mm, travel distance Y-axis: 570 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 18,500 W, number of axes: 3, This 3-axis DOOSAN DNM 5700 was manufactured in 2017. It features an X-axis travel of 1050 mm, Y-axis travel of 570 mm, and Z-axis travel of 510 mm. The machine includes a table size of 1300 x 570 mm and a maximum table load of 1000 kg. If you are looking to get high-quality machining capabilities, consider the DOOSAN DNM 5700 vertical machining centre we have for sale. Contact us for further details. • Operating hours: 1,495 h • Travels: • Rapid traverse (X/Y): 36 m/min • Rapid traverse (Z): 30 m/min • Spindle: • Torque: 117.8 Nm • Taper: CAT 40 • Table: • Size: 1300 × 570 mm Pjdpfoyv Ezrex Ag Dopr • Tooling: • Tool changer: 30 positions

Condition: used, machine/vehicle number: 26411, Year of construction: 2013, operating hours: 5,486 h, load capacity: 2,500 kg, lifting height: 3,950 mm, fuel type: diesel, mast type: simplex, construction height: 2,635 mm, Equipment: cabin, sideshift, .: 26411 Machine details: Year of manufacture: 2013 Load capacity: 2,500 kg Ppjdpfx Ageyu Tk Dj Dor Lifting height: 3,950 mm Indicated operating hours: 5,486 h Mast type: Standard Mast height: 2,635 mm Length/Width/Height: 2,500 / 1,160 / 2,210 mm Operating weight: 4,200 kg ---- Equipment: * Overhead guard * 3rd hydraulic valve * 4th hydraulic valve * Full cabin * Heater * Front work lights * Rear work lights ----- Attachments: * Side shifter * Fork positioner * Load backrest ---- Further machine information: ---- The stated operating hours are generally read-off hours. We are happy to offer you suitable transport. An additional 250–300 forklifts, attachments, and sweepers are immediately available for you. Rentals also possible! We are happy to buy your used machine. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. For trade buyers, the machine is sold as-is, not refurbished. All information is provided without guarantee; errors and changes excepted.

Condition: excellent (used), Year of construction: 2012, Doosan MX 2600 ST, Year 2012, Location: 78176 Blumberg Turning diameter: 760 mm Turning length: 1540 mm Control: FANUC Chuck diameter: 254 mm Bar capacity: 76 mm Spindle bore: 86 mm Swing over bed: 1000 mm X-axis travel: 630 x 220 mm Z-axis travel: 1585 x 1515 mm Y-axis travel: 230 mm Spindle speed: 4,000 rpm Spindle nose: A2-8 Milling spindle speed range: 10,000 rpm Tool changer: 80 positions Turret: 12 stations Tool holder: BMT 65 P, Capto Drive power: 26/22 kW Total power requirement: 100 kVA Machine weight: approx. 15.5 t Space required: approx. 6.1 x 2.7 x 3.0 m Equipped with sub-spindle, lower turret, driven tools, and 80-position tool magazine. Hydraulic hollow chuck system 12-position lower tool turret with BMT 65 P Chuck air-blow system for spindle 1 and spindle 2 Automatic central lubrication Contour milling with B-axis incl. 4-axis simultaneous machining Psdpjywax Iofx Ag Dspr Internal coolant supply on the sub-spindle Automatic tool measuring arm Electronic tool breakage monitoring 2-stage clamping pressure for main and sub-spindle Automatic shutdown after production end Hinged belt chip conveyor 2 x power chucks 200 mm 1 x radial AGW 1 x axial AGW Extended high-pressure and paper band coolant system 80-position tool magazine Further information available upon request. Commissioning and training available on request.

Condition: used, machine/vehicle number: 26412, Year of construction: 2016, operating hours: 9,925 h, load capacity: 5,000 kg, lifting height: 4,690 mm, free lift: 1,410 mm, fuel type: diesel, mast type: triplex, construction height: 2,317 mm, Equipment: cabin, .: 26412 Equipment details: Year of manufacture: 2016 Load capacity: 5,000 kg Lifting height: 4,690 mm Read operating hours: 9,925 h Free lift: 1,410 mm Mast type: Triplex Mast height: 2,317 mm Ppsdpfx Ajyg Df Aeg Der Length/Width/Height: 3,300 / 1,460 / 2,185 mm Operating weight: 7,550 kg ---- Features: * Overhead guard * 3rd valve * 4th valve * Full cab * Heater * Front working lights * Rear working lights ---- Further equipment information: ---- Operating hours are generally read off the display. We are happy to offer you suitable transport. Another 250 - 300 forklifts, attachments, and sweepers immediately available for you. Of course, also for rent! We are also happy to buy your OLD one. Do you have any questions? You can reach us during our business hours from 7:30 am to 4:00 pm. We look forward to hearing from you! We speak English. Interim sale and errors for this offer are expressly reserved. For dealers, the equipment is sold as-is, not refurbished. All information subject to change and errors excepted.

Year of construction: 2006, condition: ready for operation (used), A Doosan CNC lathe is available. Turning diameter: 300mm, turning diameter over bed/face slide: 550mm/390mm, max. turning length: 510mm, travel path X/Z: 205mm/580mm, rapid traverse: 24m/min, C-axis: 360°, bar capacity: 65mm, spindle bore: 76mm, speed: 4500rpm, tool stations: 12. Machine dimensions X/Y/Z: approx. 3500mm/1650mm/1800mm, weight: approx. 4250kg, control: Fanuc Series 18i-TB. Documentation vorhanden. An on-site inspection is possible. Pedpfx Ajyvuvxeg Djpr

Condition: excellent (used), power: 141.2 kW (191.98 HP), operation weight: 25,100 kg, chain condition: 70 %, Year of construction: 2017, operating hours: 7,494 h, Equipment: air conditioning, DOOSAN DX235LCR-5 Year: 2017 Operation hours: 7.494 hrs ROPS Pedpfx Agexlin Eo Dspr Radio back- drive camera Airco Hydr. 2 piece boom Stick : 3m central lubrication all hydr. lines (hammer-, gripper-, scissor-) Oil Quick 70/55 Schnellwechsler 1x Bucket with 1m width U/C: 70% good trackshoes 600 mm width engine with 141.2kW CE Operation weight: 25.1 to.

Condition: excellent (used), functionality: fully functional, Year of construction: 2012, operating hours: 8,200 h, load capacity: 9,000 kg, lifting height: 3,100 mm, fuel type: diesel, Equipment: cabin, Diesel forklift Machine make: DOOSAN Designation: D90S-5 Manufacture year: 2012 Meter readings (mtg): 8235 Unladen weight (kg): 12197 Lifting capacity (kg): 9000 Ppodpfx Agovfp Rde Dsr Lifting height (mm): 3100 Side shift forks Mast type: STD Fuel type: diesel After a major maintenance overhaul for more than €7,000 - new tires - new forks - regeneration of cylinders, - gearbox: discs + sealants - brakes: discs and bearings - all oils, fluids and filters Technical condition: used, very good

Condition: like new (used), Year of construction: 2018, operating hours: 3,621 h, functionality: fully functional, machine/vehicle number: ML272-000046, turning length: 1,074 mm, turning diameter: 550 mm, spindle bore: 102 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 30 rpm, travel distance X-axis: 300 mm, travel distance Z-axis: 1,080 mm, spindle motor power: 35,000 W, type of input current: three-phase, overall weight: 9,450 kg, mount diameter: 32 mm, The machine is in very good condition, maintains new parameters and accuracy. Can be tested. No warranty of any kind. Data subject to error. Sale reserved until deposit is received. Ppedsvri I Aepfx Ag Djr

Condition: ready for operation (used), Year of construction: 2023, functionality: fully functional, turning length: 300 mm, turning diameter: 300 mm, spindle bore: 52 mm, spindle speed (max.): 4,500 rpm, controller model: FANUC CNC, TECHNICAL DETAILS Max. turning diameter: 300 mm Max. turning length: 300 mm Spindle bore: 52 mm Main spindle speed: 4,500 rpm Tool turret: 12 stations MACHINE DETAILS Machine weight: 2,200 kg EQUIPMENT Horizontal CNC lathe High-performance main spindle Robust machine construction for high dimensional accuracy Tool turret with fast indexing Compact design with a small footprint Ppjdpfx Aoyvfvujg Der User-friendly CNC control High reliability and low maintenance Control: FANUC CNC

Condition: excellent (used), Year of construction: 2013, Doosan Puma MX2600ST Fanuc 31i-A with Manual Guide i Swing over bed: Ø 1000 mm Max turning diameter: Ø 760 mm Max part length: 1540 mm Bar capacity: Ø 76 mm Movement: X1: 630mm Z1: 1585 mm Y: 230 mm (± 115 mm) X2: 220mm Z2: 1515 mm A: 1550 mm Left/right spindle: Spindle speed: 4000 rpm Spindle nose: A2-8 Spindle power: 22/26 kW C-axis: 360° (0.001) Milling spindle: 12,000 rpm Spindle power: 15/18.5/22 kW Spindle taper: Capto C6 B-axis: 0.001° Lower turret: 12 stations, 4000 rpm, BMT65P Pjdpfx Agsv Hyf Uj Djpr Tool magazine: 40 positions Automatic tool measurement Swarf conveyor Coolant for driven tools Coolant through milling spindle 1.5 KW , 2.0 MPA , 21.6 l/min Coolant pump for lower turret 2.2 KW , 1.0 MPA , 30 l/min Cutting force monitoring

Condition: like new (used), Year of construction: 2022, 3-Axis CNC Lathe Type: Puma GT 2600 LM Manufacturer: Doosan Year of manufacture: 2022 New Fanuc i Series Plus touch control 12-inch Samchully hydraulic chuck Ppedpfoywthvjx Ag Djr Maximum turning diameter: 410 mm Maximum turning length: 1030 mm Spindle bore: 81 mm Spindle speed: 3500 rpm Turret: 12 positions BMT 55 Driven tool speed: 5000 rpm X: 265 mm Z: 1100 mm C: ±360° LNS chip conveyor Tool probe MT5 tailstock Including: 4 driven tool holders 2/2 8 standard tool holders Total: 12 pcs Documentation Machine as new, only 1,800 operating hours Available for inspection in our warehouse

Condition: good (used), Sperr & Lechner SL II A-100 Hydraulic Bookbinding Press Ready for operation. The machine is like new. The press has a built-in hydraulic unit. Piston rod area (main plate): 580x440mm Single piston rod area: 440x280mm. Irreplaceable in bookbinding for the production of books, pads, etc. Weight: 600kg. Psdpfxjywdmvs Ag Depr 380V power supply. Made in Germany.

Condition: used, functionality: fully functional, Year of construction: 2019, operating hours: 6,280 h, load capacity: 3,500 kg, lifting height: 5,205 mm, free lift: 1,700 mm, fuel type: gas, mast type: triplex, construction height: 2,515 mm, fork length: 1,500 mm, empty load weight: 5,500 kg, total length: 3,200 mm, drive type: Treibgas, construction width: 1,800 mm, LPG forklift Load centre: 500 Mast type: Triplex Pjdpjytkkfsfx Ag Djpr Technical condition: normal Front tyre type: Superelastic Front tyre condition: 80 - 100% Rear tyre type: Superelastic Rear tyre condition: 80 - 100% Sideshift, fork positioner, 3rd valve, 4th valve, rear working light, front working light, roof cover, windscreen, full free lift,

Condition: excellent (used), functionality: fully functional, Year of construction: 2021, operating hours: 1,604 h, machine/vehicle number: DHKCEAAHSM6051226, USED DOOSAN HYDRAULIC EXCAVATOR IN GOOD WORKING CONDITION MODEL : D80R Pjdpfx Agsy E Hb Sj Depr SERIAL : DHKCEAAHSM6051226 YEAR : 2021 HOUR : 1604

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 509 h, Doosan 77.55 Compressor – 3000 rpm – 8.6 bar – 35.5 kW – Weight 750 kg – 509 operating hours = Additional Information = Year of manufacture: 2022 Intended use: Construction Pedpfx Agsyrigvo Depr Contact Miguel Cubas for further information. = Company Details = We are located between Antwerp and Brussels along the A12 motorway, close to the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: like new (used), Year of construction: 2021, operating hours: 3,500 h, functionality: fully functional, spindle speed (max.): 6,000 rpm, rotational speed (max.): 6,000 rpm, chuck outer diameter: 152 mm, bar diameter (max.): 51 mm, We are offering this Doosan PUMA TT1300SYB CNC turning and milling center in like-new condition, year of manufacture 2021. Manufacturer: Doosan Model: PUMA TT1300SYB Year of manufacture: 2021 Condition: Like new Category ID: 1128 Type ID: 2239 Ppsdpfeyryymox Ag Der Machine type: CNC turning and milling center If you have any questions or require further information, please do not hesitate to send us a message or call us. For sale: Doosan PUMA TT1300SYB, almost new, from 2021, equipped with an automatic LNS SPRINT 565 S2 bar feeder, with driven tool stations and only 3,600 cutting hours. This is a high-end multitasking CNC lathe with dual synchronized spindles and dual Y-axis driven turrets, each with independent Y-axis movement. A unique machine in its category, designed for complete machining in a single setup. - Dual synchronized spindles - Dual turrets with driven tool holders - Upper and lower Y-axis (SYYB configuration) - Simultaneous machining on both sides - Drastically reduced cycle times - High precision and thermal stability - Spindle speed up to 6,000 rpm - Bar capacity up to Ø51 mm - 6” chuck - Prepared for automation and available with bar feeder for unattended production. Ideal for automotive, hydraulics, railway, aerospace, and highly complex technical components. Robust, productive, and extremely versatile machine. Premium configuration rarely found on the used machinery market. Special price: 170,000 EUR. WORKING HOURS: ONLY 3,500 CUTTING HOURS. Available for inspection and functional testing. A strategic investment for workshops looking to increase productivity, reduce lead times, and improve margins from day one.

Condition: used, Year of construction: 2018, operating hours: 5,156 h, 2018 | Doosan DX235LCR-5 | Used Tracked Excavator | 5156 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 115500 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 64 inspection points 58 approved ✅ 3 imperfect ℹ️ 3 issues ⚠️ 📌 Inspector's Comment: Crawler excavator Doosan DX235LCR-5 from 2018. short tail version. the boom measures 5.80m (basic boom 3.10m, adjustable part 2.90m) and the stick 2.40m. floor plate width 600mm. the condition of the machine corresponds to the value of the operating hours. the machine shows wear on pins and bushings corresponding to the age and mileage as well as the purpose of use, as well as signs of use (dents, abrasions, etc.). at the time of the inspection, the machine ran/functioned without any abnormalities. maintained machine. the sprocket/turas should be replaced. the customer has decided to keep the backhoe bucket after the inspection. the illustrated backhoe bucket is therefore NOT included in the sale! 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "33296 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? Psdsyfxv Topfx Ag Dopr We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: like new (used), Year of construction: 2022, functionality: fully functional, turning length: 725 mm, turning diameter over cross slide: 590 mm, turning diameter: 376 mm, spindle motor power: 30 W, spindle speed (max.): 2,800 rpm, spindle bore: 115 mm, travel distance X-axis: 280 mm, travel distance Z-axis: 830 mm, rapid traverse X-axis: 24 m/min, rapid traverse Z-axis: 30 m/min, torque: 1,112 Nm, bar passage: 103 mm, bar diameter (max.): 103 mm, quill stroke: 100 mm, quill diameter: 100 mm, quill travel distance: 100 mm, swing diameter over cross slide: 590 mm, spindle nose: A 2-11, swing diameter over bed slide: 720 mm, feed force X-axis: 9,465 N, feed force Z-axis: 17,379 N, Equipment: documentation/manual, rotational speed infinitely variable, As-new machine, only used for commissioning and combined with a Universal BIG 70 LoadAssistant holder. Can also be purchased separately. Ppjdpfsyud Uasx Ag Der