Used Eberhardt Bread Roll Press for sale (19,686)

Condition: excellent (used), Year of construction: 2006, Dimension: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany. Hnodpoy Snlxofx Ab Nel

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm Hnsdoy Snkbepfx Ab Nsl locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t

Condition: good (used), Year of construction: 1994, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Hjdpfjy Sni Rjx Ab Nenl Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Hnedpfx Abjy Sniwe Nsl Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: used, empty load weight: 4,802 kg, maximum load weight: 13,198 kg, overall weight: 18,000 kg, axle configuration: 2 axles, first registration: 09/2023, next inspection (TÜV): 12/2026, suspension: air, tire size: 265/70 19,5, tire condition: 80 %, color: grey, Year of construction: 2023, front tire size: 265/70 19,5, rear tire size: 265/70 19,5, driver cabin: day cab, emission class: none, Equipment: ABS, truck registration, Reference no. for inquiries: 40755 Hueffermann, Hook Lift Trailer * Year of manufacture: 2023 * ABS, Anti-lock Braking System * Air suspension * Pneumatic coupling head (red + yellow) * Storage/toolbox * Galvanized * Inspections: HU / AU valid until 12/2026 * Suspension type: Air * Gross vehicle weight: 18,000 kg * Unladen weight: 4,802 kg * Payload: 13,198 kg * Permissible total weight: 18,000 kg * Axle manufacturer: SAF * Tire condition 1st axle: 80% -- 80% - Tire size: 265/70 R19.5 * Tire condition 2nd axle: 80% -- 80% - Tire size: 265/70 R19.5 * Tire sizes: 265/70 R19.5 * Front loading * Tipping function Disclaimer: Changes, prior sale, and errors reserved. More photos and videos available on our homepage. Our comprehensive service includes, for example: * Purchase / sale / rental of commercial vehicles Hodpfxoyic Hnj Ab Njnl * Fast and uncomplicated financing * Preparation of all (export) documents * Ordering of export/customs license plates * Vehicle reconditioning: new tarpaulins, lettering, painting, etc. * Professional loading and load securing * TüV inspections, registration service * Transfer and delivery of commercial vehicles Contact our trained staff—we will be happy to advise you.

Condition: used, Roll Forming Line Dreistern with Accessories Machine Bed Features: - Production direction: right to left - Axis spacing: 130 mm - 18 driven stations - 1x 9.2 kW DC motor Roll Former Stand Features: - Tool width per stand: 135 mm - Working shaft diameter: 30 mm - Working shaft connection: 20 mm with keyway - Fixed lower shaft - Axial adjustment - Adjustment range UW-OW: 60 - 100 mm Scope of Delivery: - Machine bed - Strip butt welding device - Entry table - Straightening unit - DC motor - Control panel - Operating console - 2 straightening roll holders - 3 gearboxes - 9 roll former stands - 36 universal joints Was operating flawlessly in production until dismantling at the customer's plant. Hodpfxsy Sm Sde Ab Nenl Coil decoilers and punching machines are also available from us as used equipment. For the reinstallation of the system, we can support you with: - Planning - Mechanical overhaul - Control system retrofit - Painting - Safety concept - CE documentation

Condition: used, mileage: 386,235 km, power: 353 kW (479.95 HP), first registration: 09/2013, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: blue, gearing type: mechanical, emission class: euro5, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), navigation system, EURO5, 1 BED, SUN VISOR, AIR CONDITIONING, ENGINE PTO, FRONT LEAF SUSPENSION 9000KG, REAR AIR SUSPENSION, LIFT AND STEER AXLE, DIFFERENTIAL LOCK, STORAGE BOX, BEACONS, FRONT HYDRAULICS FOR CRANE CONTAINER, TRAILER HITCH, WHEELBASE 3.60M, ENGINE BRAKE, NAVIGATION, 16-SPEED MANUAL GEARBOX, CB RADIO, MULTIFUNCTION STEERING WHEEL, ELECTRIC WINDOWS/MIRRORS, 32,000/44,000KG, HOOKLIFT HIAB MULTILIFT XR26S59, SLIDING HOOK, LOCKING SYSTEM, 26 TON CAPACITY, IN GOOD CONDITION!!! Hsdoy Rr Rvjpfx Ab Nenl

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Roll Forming Line Dreistern P3.100 with Accessories Machine Bed Features: Production direction: right to left Centre distance between axes: 330 mm 22 stations 18 driven stations (18 gearboxes) Quick-change plates Mechanical quick release clamps Coolant and lubricant piping 2 x 18.5 kW Bosch motors Roll Forming Stands Features: Tool width per stand: 275 mm Working shaft diameter: 50 mm Hedpfsy Sm A Aex Ab Nenl Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower shaft to upper shaft (UW-OW): 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower shaft to upper shaft ratio (UW-OW): 1:1 Scope of Delivery: Machine bed with gearbox carrier Infeed table Measuring wheel unit, pneumatic Special straightening unit 18 gearboxes 18 forming stands 2 Bosch motors 36 drive shafts The machine was running flawlessly in production until it was dismantled at the customer's site. Control system is not included. Decoilers and punching units are also available as used machines. The line can be easily extended with additional stations. We can support you with the reassembly of the line, offering: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Profiling Line Dreistern P3.100 with Accessories Machine Bed Features: Production direction: left to right Center distance: 330 mm 18 stations 16 powered stations (16 gearboxes) Quick-change plates Mechanical quick-release clamps Coolant piping 2x 18.5 kW Bosch motors Profiling Frames Features: Tool width frame: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower to upper shaft: 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower to upper shaft ratio 1:1 Scope of Delivery: Machine bed with gearbox support Infeed table Measuring wheel unit, pneumatic Special straightening unit 16 gearboxes 16 profiling frames 2 Bosch motors Hnjdpfx Abey Sm Aps Nel 32 cardan shafts The machine was working flawlessly in production until dismantling at the customer's site. Control system not included. Coil decoilers and punching units are also available used. The line can easily be extended with additional stations. We can support you with reassembly of the line: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: new, Year of construction: 2024, functionality: fully functional, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 175 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. Standard equipment Capacity (length - ton) 3050mm - 175t Installation height 530mm Outreach 450mm Stroke 265mm Servo drive Y1, Y2, X - 3 axles Control unit - DT 15 Manuel F. AKAS FPSC safety system Hsdpfetr Dk Eox Ab Nonl CE-Fiessler Akas Servo motor backgauge & linear guide & Ball screw system Manual crowning European tool holder Sliding front arms Options - DELEM 69S control unit (3D control) -Motorized crowning - 6 axes X=650mm Y1, Y2, X ,R , Z1, Z2 (6 axes controlled press brake) press brake) -Lower tool European M.460R.85 -European upper tool P135.75.R08

Year of construction: 2024, condition: new, Here a new AD-R 37220 is offered:Bending force: 220 tonsBending length: 3700Pass between uprights: 3100 mmHub: 265 mmInstallation height: 530 mmExtension: 410 mmTable height: 900 mmTable width: 104 mmY Fast speed: 160 mm/sec.Y Working speed: 10 mm/sec.Y Withdrawal speed: 120 mm/sec.X axes Working speed: 250 mm/sec.R axes Working speed (manual): 250 mm/sec.R axes Travel: 250 mm/sec.X axes Distance: 650Length: 4950 mmWidth: 1770Height: 2900Total weight: 14100 kgOptions:CE with manual F.AKAS II M -FPSC-B-C Safety cover Hnodpfxsd S I R Ts Ab Nol

Year of construction: 2024, condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data: AD-R 60400 Bending force: 400 tons bending length: 6050 mm passage between the uprights: 5100 mm stroke: 365 mm Installation height: 630 mm Abroad: 510 mm Optional foreign diameter: 750 mm | 1000 mm | 1250 mm Hjdofin Hwepfx Ab Nsnl table height: 1220 mm table width: 154 mm Y Fast speed: 120 mm/sec. Y Working speed: 8 mm/sec. Y Retraction speed: 100 mm/sec. X axes working speed: 250 mm/sec. R axes working speed: 140 mm/sec. R axes travel: 250 Engine power: 37 kW length: 7500 mm width: 2110 mm height: 3710 mm Weight approx. 35 tons With more than 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally renowned manufacturers in their sector, whose products are sold in 120 countries. With the branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here here we are your direct contact person from the ranks of Durmazlar, who will competently assist you with advice and practical support when it comes to machines for sheet metal processing. Our demonstration center gives you the opportunity to get an overview of our

Year of construction: 2024, operating hours: 32 h, condition: new, Make: DURMA Type: AD-S 30175 Year of construction: 2020* bending length: 3050 mm Press force: 1750 kN Hsdodx Nluspfx Ab Nenl Control: DELEM DA-66T Operating hours: 32 h Controlled axes Backgauge: X,R,Z1,Z2,+Delta X +/- 125 mm CNC controlled passage between the uprights: 2600 mm stroke length: 265 mm Installation height: 530 mm table width: 104 mm table height: 900 mm Stands projection: 410 mm travel range X-axis: 650 mm traverse speed X-axis: 500 mm/s travel range R-axis: 250 mm infeed speed: 160 mm/s folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1,Y2,X,R - X=650 mm Control: CNC Cybelec ModEva 19T - PC 1200 3D SW D-BEND 3D CAD/CAM import & simulation program CNC controlled motor-driven crowning European tool clamping system 60 mm die holder (only for European die system) Throat 410 mm 2 support arms movable from the front with T-slot and tilt stop Backgauge system: Siemens DC Servo motorized with linear guide and ball screw Protective covers CE Marking Extended equipment Safety system CE standard for EU: FIESSLER AKAS-3P motorised+FPSC (SAFETY PLC) Controlled axes Backgauge: X,R,Z1,Z2,+Delta X +/- 125 mm CNC controlled Control: DELEM DA-66T Hydraulic top tool clamping Wila NSCL-II-HC/UPB - PREMIUM - 250 t/m Hydraulic bottom tool clamping Wila NSCR-II-HC-CNC/UPB - PREMIUM - 300 t/m Powerpack for hydraulic clamping AP3-AP4 Bending aid -

Year of construction: 2024, condition: new, The DA-69T control offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The entire 3D machine setup includes multiple tool stations and provides immediate feedback on product feasibility and handling. DA-69T features: - 3D- and 2D- graphical touch screen programming mode - 3D representation in simulation and production - 17-inch TFT colour display with high resolution - Complete Windows Application Suite - Compatible with Delem Modusys (module scalability and adaptivity) - USB, peripheral interface - Open system architecture - Sensor Bending and correction interface - Profile-T3D offline software - great contribution to environmental protection, climate change and the greenhouse effect will thank us, the next generation will thank us too! - Fully electronic drive - Up to 30% higher productivity - Up to 50% energy savings through Start-Stop technology - Faster than hydraulic press brake - Reduced operating costs - Much lower service and spare parts costs (the electric press brake is technically much simpler and almost maintenance-free) - No harmful oil - quiet - efficient - independent of Hyd. Oil - Low noise operation - relaxed and stress-free bending - Complete work area - Touchscreen operation Machine dimensions: Hjdpfxsd Sak Sj Ab Nenl ( L x W x H ): 2.150 mm x 1.650 mm x 2800 mm Technical details: bending length: 1.250mm Free stand passage: 1.300 mm Press

Condition: new, Year of construction: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 175 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. Hnodjttatbopfx Ab Nel Standard equipment Capacity (length X ton) 3050mm x 175t Installation height 530mm Outreach 450mm Stroke 265mm Y1, Y2, X - 3 axes Control unit - DT 15 Manuel F. AKAS FPSC safety system CE F.AKAS BVLT light barrier and safety cages (for tandem press brakes) Servo motor backgauge & linear guide & Ball screw system (X) Manual crowning European style tool clamping system Sliding front arms Hydraulic block and valves in special design according to worldwide standard -Electrical equipment according to worldwide standard Selected options -Control unit - Delem 66S - NEW -Motorized crowning - X=650mm X,R, Z1, Z2 (6 axes controlled press brake) press brake) -Lower tool European M.460R.85 -European upper tool P135.75.R08

Condition: new, The DURMA AD-S 601000 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1000 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Technical details: - Model: DURMA AD-S 601000 - Pressing force: 1000 tons - Working length: 6 meters - Control: SKY22 (3D control) - Back stop: 6 axes (X1, X2, R1, R2, Z1, Z2) - Bending aid: AP3-AP4 integrated for optimized handling of heavy workpieces - Condition: As good as new, available immediately Features and advantages: Hnedpfx Abovwm A Is Njl - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the 6-axis back stop control - Support for heavy and large sheets thanks to integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.

Year of construction: 2024, condition: as good as new (ex-display), Hydraulic bending machine with variable axes HRB 3V by Durma Technical data: Bending size: 3100 mm Bending capacity Ødx1, 5:51 mm Bending capacity Ødx5: 60 mm On bending performance Ødx1, 5:39 mm Hnodpod E Ib Iofx Ab Nel Performance of the bending Ødx5: 35 mm Upper roller: 520 mm Bottom roll: Secondary roller: 470 mm Maximum roll width: length: 6600 mm Width: 2250 mm Height: 2670 mm Working height: 1920 mm Weight: 40500 kg Motor power: 45 kW + 18.5 Min. additional upper roller diameters: Oil tank capacity: 1000 litres More machines are demonstration ready for us in Staufenberg. Upon request we send more information.

Year of construction: 2024, condition: new, AD-S 40400 ABKANTPRESSEBending force / Bending force ton400Bending length / Bending length mm :4050Distance between columns :3400Y rapid speed / Express speed mm / sec: 100Y working speed / Working speed mm / sec: 8Y return speed / Return speed mm / sec: 80Crowning / Crowning -: Mot.Daylight / Installation height tool passage and penetration depth of your press brake mm: 630Table width / Table width mm: 300Table height / Table height mm: 1040Stroke / Stroke mm: 365Throat depth / Projection mm: 510Support arms / Support arms: 2 piecesBack gauge finger blocks / The backgauge is standard with two finger blocks amount: 2 piecesSpeed of travel in X-axis / Pressing force and speed of your press brake. X - Axle size / sec: 350Travel in X-axis / x-axis Travel directionmm: 750Speed of R-axis(max.) Speed R axis max. mm / sec: 300Travel in R-axis / R axis Travel directionmm: 250Motor power / Motor power kW: 37Oiltank capacity / Oil tank capacity lt: 450Length / Length mm: 5750Width / Widthmm: 2110Height / Heightmm: 3540Weight approx. / Weight approx.kg: 27760X=650mm X,R,Z1,Z2, /AL)CE with manual F. Akas ll M-FPSC-B-C (SAFTY PLC)Upper tool DurmaLower tool DurmaCentral control motor Price plus transport and commissioningWe look forward to hearing from you. Hodpfxod Rlk Hj Ab Nsnl

Condition: new, Year of construction: 2025, functionality: fully functional, operating hours: 30 h, ✅ 1. Metalworking companies with medium to high volumes 🔹 Series production / repeat parts If you produce many identical or similar parts, automation pays off as it reduces the cost per part and ensures consistent quality. 🔹 High production > 1,000 parts/month The higher the output, the faster the investment pays for itself through increased productivity. ✅ 2. Companies facing skilled labor shortages or high workloads 🔹 Difficulty finding or retaining qualified staff A robot can partially replace skilled operators and safeguard production capacity. 🔹 Night shifts / 24/5 production Hodpfx Abjyb I Azs Nsnl Robots can work longer and without fatigue → higher output without additional personnel. ✅ 3. Companies with complex bending processes or high quality requirements 🔹 Tight tolerances / minimizing errors A robot ensures consistent repeatability. 🔹 Complex downstream processes (e.g. handling, deburring, stacking) An integrated robot can take over tasks that would otherwise be performed manually. ✅ 4. Manufacturers facing tight deadlines or cost pressure Short delivery times required Automation reduces throughput times. 🔹 Cost pressure due to competition Longer machine utilization and lower unit costs improve competitiveness. ✅ 5. Future-oriented companies 🔹 Industry 4.0 / digitalization An automated press brake can often be integrated more effectively into IT/MES systems. 🔹 Scalable production If you plan to grow in the future, you have a flexible foundation.

Year of construction: 2024, condition: new, Control unit - with NC control Conical bending device Side roll positioning electronically synchronized via PLC Safety mechanism for welding (welding possibility) on the machine Machine body made of stress-relieved annealed steel 4 roll drive system - upper, and lower roller with hydraulic motor driven synchronized via planetary gear (ᐳ 430 mm) Electrical and hydraulic protection against overloads Hydraulically adjustable lower roller pressure Hydraulic roller brake, prevents the sheet from slipping back Hydraulic swinging out of the upper roller bearing, for easy removal of the formed sheet Safety wire Induction-hardened rollers (HRC 54), crowned ("crowning"). Variable speed Bending length: 2050 mm Bending capacity: 13 mm (d x 5) Bending capacity: 10 mm (d x 1.5) Top roll: 230 mm Bottom roll: 210 mm Maximum roll width: 30 mm Length: 3830 mm Width: 1160 mm Height: 1200 mm Motor power: 11 kW Weight: 4700 kg Hsdpfsdzzyfsx Ab Nenl

Year of construction: 2024, condition: new, Make: DURMA Type: AD-R 40400 Year of construction: NEW bending length: 4050 mm Hnodpfx Absd Hy Huo Nsl passage between the stands: 3400 mm Stroke: 365mm Installation height: 630 mm Throat: 510mm table height: 1050mm table width: 154mm Y high-speed: 140 mm/sec. Y working speed: 8mm/sec. Y retraction speed: 120mm/sec. X-axis working speed: 250mm/sec. R axes travel: 250 Engine power: 37 length: 5750 mm width: 2110mm height: 3540mm Weight: approx. 25000 kg Standard equipment Control: CNC Cybelec ModEva 19T CNC controlled motor-driven crowning European tool clamping system / or on customer request Durma clamping system Extended equipment: Safety system CE standard for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Controlled axes Backgauge: X1,X2,R1,R2,Z1,Z2 Control: DELEM DA-66T Delem 66T - 69T or Durma control is selectable DAM - Durma angle measuring system Hydraulic top tool clamping Wila NSCL-I-HC/UPB - PRO - 180 t/m Hydraulic bottom tool clamping Wila NSCR-I-HC-CNC/UPB - PRO Powerpack for hydraulic clamping D-BEND 3D CAD/CAM import & simulation program AP3 & AP4 Bending aid 750mm to 1500 mm selectable Parking area for support arms (1000mm) TANDEM preparation Laser bending line Oil heating Central lubrication manual or motorized Air conditioning for switch cabinet Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information on request

Year of construction: 2024, condition: new, SPECIAL ACTION: Folding press AD-S 1260 length/width/height: 2300mm/1550mm/2850mm Weight: 47000 kg Bending force: 60 tons bending length: 1250 mm Passage between stands: 1050 mm Stroke:160mm Installation height: 530 mm Throat: 450 mm table height: 900 mm table width: 104 mm Hnjdpfed R Dhpox Ab Njl Y High speed: 200 mm/sec. Y Working speed: 10 mm/sec. Control CYBELEC MODEVA 19T touch screen CE with manual F.AKAS II M -FPSC-B-C (SAFETY PLC) Europ. upper tool P97.75.R08 (one of them in pitch) Europ. lower tool M.460R.85 (one of them in pitch) Manual quick clamping Y1, Y2, X, R (4 axes) X=650mm X,R CNC controlled motorized crowning 60mm die holder (only for european dies) Overhang 410 sliding support arms at the front with T-slot, clip stop and guidance along the entire line Backgauge : Siemens DC Servo motorized & linear guide & ball roller system Support arms 2 pieces Stop finger 2 pieces With foot pedal Oil capacity: 100l Price is valid from Staufenberg. The machine can be viewed and demonstrated at any time by appointment in our demonstration centre in Staufenberg. Further machines are ready for demonstration at our premises in Staufenberg. We will be happy to provide you with further information upon request.

Year of construction: 2024, condition: new, YOU BUY DIRECTLY FROM THE MANUFACTURER Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data on request. Standard equipment Y1, Y2, X, R - 4 axes Control unit - CNC DT 15 Servo motor backgauge & linear guided ball screw system (X-R) CNC Crowning European type tool clamping system Movable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standard electrical equipment according to worldwide standard Optional equipment CE Manuel F. AKAS II M FPSC-B-C + safety covers with switch CE F. AKAS-LC II AKAS-3 M Motorised + FPSC (Safety PLC) CE BLVT safety - only for tandem machines Z1, Z2 Axes X1, X2 Axes R1, R2 Axles Delta X axis, +/- 250mm stroke or +/- 125mm CNC controlled Hnsdefirwmjpfx Ab Nsl X axis = 1000 mm - rear protection with light barrier AP3-AP4 Bending aid Height-adjustable laser angle measurement system Quick clamping system Hydraulic and pneumatic tool clamping system Upper and lower tool Lower tool positioning system Parking area Central lubrication system Oil cooler Additional stop finger and additional movable support arms Special packaging for overseas transports _____ With over 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced manufacturing facilities

Condition: new, Year of construction: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 320 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. DURMA press brake AD-S 30320 Standard equipment Capacity (length X ton) 3050mm x 320t Installation height 630mm throat 450mm Stroke 365mm Y1, Y2, X - 3 axes Control unit - DT 15 CE Fiessler Akas manual light barrier Servo motor backgauge & linear guide & Manual crowning European style tool clamping system Sliding front arms Hydraulic block and valves in special design according to worldwide standard Electrical equipment according to worldwide standard Options: Delem 66T Hnodpfx Abot Dvl Us Njl Motorized crowning Motorized X, R-axis backgauge X=650mm X and R Lower tool European M.460R.85 Top tool European P135.75.R08

Condition: new, Year of construction: 2025, The DURMA AD-S 611600 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1600 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Hjdovy Sraspfx Ab Nenl Technical details: - Model: DURMA AD-S 611600 - Pressing force: 1600 tons - Working length: 6 meters - Condition: As good as new, available immediately Features and advantages: - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the backgauge control - Support for heavy and large sheets thanks to the integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.