Used Eht Multipress 135-30 for sale (25,632)

Condition: new, empty load weight: 454 kg, maximum load weight: 896 kg, overall weight: 1,350 kg, loading space length: 2,500 mm, loading space width: 1,300 mm, loading space height: 1,500 mm, loading space volume: 4.9 m³, color: grey, construction height: 2,080 mm, working width: 1,780 mm, Hydraulics, automatic reversing, hot-dip galvanizing, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - Availability: IMMEDIATELY! - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Gross vehicle weight: 1,350 kg - Unladen weight: 454 kg - Payload: 896 kg - Interior dimensions: 250 x 130 x 150 cm (L x W x H) - Overall exterior dimensions: 385 x 178 x 208 cm (L x W x H) - Loading sill height: 54 cm - Tires: 185R14C - Brake: yes - Support wheel: yes, automatic - Incl. vehicle documents (letter) Vehicle documents (letter) - 100 km/h: at extra charge Standard equipment: - Multiplex walls 15 mm plastic-coated. - 2 rear doors lockable with VA espagnolette lock - 2 handles at the front make it easier to maneuver the trailer. - Hinges, locks and fastening materials made of stainless steel. - Loading floor height 55 cm - Multiplex wooden floor with 15 mm anti-slip surface. - TÜV-approved load securing system: 6 fixing brackets integrated in the side edge. - Bolted V-drawbar. - Fully welded and fully bath galvanized running gear - interior light - maintenance-free rubber spring axle from BPW - automatic reverse drive - BPW overrun hitch and parking brake - 13-pin plug - lighting recessed in rear frame with reversing light - large safety lighting with integrated rear fog light Accessories optionally available: - Rear supports mounted, the pair - 100km/ approval with wheel shock absorbers - Lashing rails, anchor rails, additional load securing, locking beams, tension belts, etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We have been Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - Specialist dealer & repair workshop for over 30 years - Delivery throughout Germany possible with surcharge! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Bjdpsu Hthysfx Amzjlk

Condition: new, empty load weight: 330 kg, maximum load weight: 1,020 kg, overall weight: 1,350 kg, loading space length: 2,500 mm, loading space width: 1,300 mm, loading space height: 370 mm, loading space volume: 1.3 m³, color: silver, construction height: 1,320 mm, working width: 1,780 mm, Hydraulics, automatic reverse, hot-dip galvanized, unbraked, * IMMEDIATELY AVAILABLE * Technical data: - Type: New vehicle with 2 years TÜV from first registration - TÜV: 2 years - Floor: Multiplex screen printing with anti-slip surface - Permissible total weight: 1.350 kg - Unladen weight: 330 kg - Internal dimensions: 250 x 130 x 37 cm (L x W x H) - External dimensions: 382 x 178 x 132 cm (L x W x H) - Loading sill height: 54 cm - Tires: 185R14C steel rim - Brake: yes - Support wheel: yes, automatic - Incl. Vehicle documents (letter) - 100 km/h at extra charge Standard equipment: - Anodized aluminium drop sides with profile channel from the outside-Accessories such as lashing eyes, tarpaulin buttons, hooks or hammerhead bolts can be easily fitted without drilling. - Finnish quality wooden floor - aluminium tailgate in proven Hapert look - dropside retaining ropes on tailgate - sturdy eccentric locks for the tailgate recessed in the dropside profile - very sturdy welded steel frame - frame completely hot-dip galvanized - many options available hot-dip galvanized - many sturdy cross members for high point loading - side wall struts on the sides (optimum lateral stability) - with integrated lashing holes - perforated railing on three sides 6cm (Combi-Protectrail) can also be used with locking bars and lashing straps - round holes 25mm, Slotted holes 54x25mm - 6 lashing brackets recessed inside the side edge TÜV certified to 1000DaN / kg - Maintenance-free rubber spring axle from BPW - Automatic reverse drive - BPW overrun device and parking brake - Hinges for tailgate welded to the frame - and with hooks for securing loads such as nets - Very sturdyvery sturdy bolted V-drawbar REINFORCED - steel mudguards - 13-pin plug - reversing lights - generously dimensioned safety lighting - integrated rear fog light - lighting recessed in rear frame - position lights in white at the front - preparation for rear supports - automatic support wheel in the middle Accessories optionally available: - High front grille, 40 cm removable - Tarpaulin + bows - Supports, grilles, side wall attachments, nets etc. New vehicle with warranty and TÜV. We are happy to offer you suitable financing !, Descriptions and pictures are protected by copyright !!! Over 800 trailers immediately available for you! We are for over 30 years Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix - specialized dealer & repair - workshop - delivery Germany-wide with surcharge possible! Anhänger Zentrum BAUMANN GmbH Dinxperloer Str. 389 46399 Bocholt - Errors, omissions and prior sale excepted - Bodju Htx Sepfx Amzolk

Condition: new, * IMMEDIATELY AVAILABLE * Includes side door / internal lashing rails / 100km/h approval / rear support stands / double rear doors TECHNICAL DATA • Brand: Blyss • Model: F1326HD • Vehicle type: Box trailer • Vehicle condition: New vehicle • First registration: Not registered • MOT/Inspection: 2 years from first registration Blsdpex Tvgyofx Amzek • Internal dimensions (LxWxH): 262 x 135 x 150 cm • External dimensions (LxWxH): 419 x 189 x 205 cm • Loading height of floor: 50 cm • Gross vehicle weight: 1,300 kg • Unladen weight: 495 kg • Payload: 805 kg • Chassis: Low loader (wheels next to the body) • Tyres: 165R13C • Suspension: KNOTT rubber-axle suspension • Jockey wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Reinforced bolted V-drawbar • Hot-dip galvanized frame • Multiplex floor panel, 15mm • Superstructure made of plywood with plastic-coated walls • Plywood roof • Double rear doors with lockable rotary bar lock • 2 x manoeuvring handles at the front • 6 recessed lashing rings fitted to the floor • Lashing rails mounted at a uniform height on both interior sides, h = xx cm • Forced ventilation on side walls: 2 x interior vents • Maintenance-free KNOTT rubber suspension axles • Shock absorbers including 100 km/h approval • Side door hinged on front right, can be locked from inside and outside • 2 x rear supports for safe loading even when uncoupled • Automatic reverse mechanism • KNOTT overrun hitch and parking brake • Plastic mudguards • 13-pin plug • Reversing lights • Large dimensioned safety lighting • Integrated rear fog light • Recessed tail light cluster • Automatic jockey wheel Optional accessories (available on request): • Motorcycle wheel chocks • Motorcycle tie-down straps • Tie-down straps • Additional lashing rings • Lashing rails on the walls and floor for ratchet straps & load bars • Load bars • Interior lighting • Reversing lights • and much more New vehicle with warranty and MOT. - Financing or leasing available - Nationwide delivery possible - All prices include VAT - Vehicle registration documents can be sent in advance, or temporary German export plates can be provided - Export plates with customs clearance available Descriptions and images are copyright protected!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 800 trailers immediately available! We have been an authorised dealer & service workshop for Brian James, Humbaur, Hapert, Unsinn, Cheval Liberté, Koch, Debon, Stedele, TPV, Tohaco, Vezeko, Variant, and Vlemmix for over 30 years. - Subject to errors, prior sale, and changes -

Condition: new, * IMMEDIATELY AVAILABLE * Includes internal lashing rails / 100 km/h rating / rear supports / rear ramp TECHNICAL DATA • Brand: Blyss • Model: F1326HD • Vehicle Type: Box Trailer • Vehicle Condition: New Vehicle • First Registration: None • TÜV/HU: 2 years from first registration • Internal dimensions (LxWxH): 262 x 135 x 150 cm • External dimensions (LxWxH): 419 x 189 x 205 cm • Loading height from ground: 50 cm • Gross vehicle weight: 1,300 kg • Unladen weight: 495 kg • Payload: 805 kg • Chassis: Low loader (wheels positioned beside the body) • Tyres: 165R13C • Suspension: KNOTT rubber spring axle • Jockey wheel: Yes, automatic • 100 km/h approval: Yes DESCRIPTION • Reinforced, bolted V-drawbar • Hot-dip galvanized chassis • 15 mm multiplex floor plate • Body made from plywood – plastic-coated side walls • Plywood roof • Access ramp with gas struts, non-slip • 2 front manoeuvring handles • 6 recessed lashing eyelets in the floor • Internal lashing rails on both sides at one height, h= xx cm • Forced ventilation on the side walls: 2 internal vents • Maintenance-free KNOTT rubber spring axle • Shock absorbers incl. 100 km/h approval • 2 rear supports for safe loading, even when unhitched • Automatic reversing system • KNOTT overrun and parking brake • Plastic mudguards • 13-pin plug • Reversing light • Large, high-visibility safety lighting • Integrated rear fog lamp • Rear frame lighting recessed • Automatic jockey wheel Accessories available on request: • Motorcycle wheel chocks • Motorcycle tie-down straps • Lashing straps • Additional lashing points • Lashing rails on walls and floor for tension belts and load bars • Load bars • Interior lighting • Reversing lights • and much more New vehicle with warranty and TÜV. - Financing or leasing available - Nationwide delivery available Bsdpfx Amox Tvggezelk - All prices include VAT - Registration documents can be sent in advance or temporary plates (Germany) can be provided - Export plates including customs clearance available Descriptions and images are protected by copyright!! Anhänger Zentrum BAUMANN GmbH Dekkers Waide 17 46419 Isselburg Over 800 trailers available immediately from stock! We have been specialized dealers and service workshop for Brian James / Humbaur / Hapert / Unsinn / Cheval Liberte / Koch / Debon / Stedele / TPV / Tohaco / Vezeko / Variant / Vlemmix brands for over 30 years. - Subject to errors, omissions, and prior sale -

Condition: ready for operation (used), Year of construction: 1999, sheet width 3200 mm plate thickness 4.0 mm ST distance between columns 3300 mm upper clamping bar adjustment 400 mm Adjustment folding beam 80.0 mm pivoting angle 180 Grad clamping capacity max. 200 KN rear stop 10.0 - 1600 mm oil volume 160 Liter Bsdpfsxaa A Nox Amzelk total power requirement 9.8 kW weight 8500 kg range L-W-H ~ 4900 x 2000 x 2300 mm From a maintenance workshop Good / well-maintained condition (!!) - in checked conditions - machinevideo - ?v=RY-amZooeX4 Equipment: - Robust CNC folding machine - CNC control unit - CYBELEC "DNC 80 PP" * Swiveling control panel, front right * 2D graphic display for display and multiple simulation * 2D graphic programming * Easy handling - CNC electro-motorized backgauge * Travel range 10.0 - 1,600 mm * Pneumatic / lowerable stop fingers * Adjustment speed max. 250 mm/sec. * Rear sheet support table with brushes - Electro-motorized lower beam adjustment (S axis) - Electro-hydraulic pivoting movement of the lower beam - Pneumatic upper tool clamping - Pneumatic lower tool clamping - 1x freely movable double foot switch - Original operating instructions + wiring diagram/hydraulic diagram Special accessories included: - 1x split set of goat's foot upper tools, H = 150 mm (not complete) - 1x split set of goat's foot upper tools, H = 200 mm (not complete) - 1x split bending/lower tool - Rear sheet support with brushes

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, stroke length: 240 mm, throat depth: 300 mm, controller model: CYBELEC DNC 880S, bending force (max.): 175 t, distance between stands: 3,050 mm, TECHNICAL DETAILS Pressing force: 175 t Bending length: 4,050 mm Distance between uprights: 3,050 mm Throat depth: 300 mm Stroke: 240 mm Stroke speed (down, unloaded) max.: 140 mm/s Working speed max.: 9 mm/s Stroke speed (return) max.: 130 mm/s Distance table/punch min.: 370 mm Distance table/punch max.: 610 mm MACHINE DETAILS Control: CYBELEC DNC 880S Total power requirement: 15 kW Controlled axes: Y1, Y2, X, R Dimensions & Weight Space requirement: approx. 5.89 x 3.6 x 3.16 m Blodpfx Asygw Ahjmzjk Machine weight: approx. 15 t EQUIPMENT CNC crowning 4x backgauge fingers (manually adjustable) Foot switch 1 set of upper tooling 1 set of lower tooling 2x front sheet supports Side and rear safety guards Operating manual

Condition: ready for operation (used), Year of construction: 2006, This Durma AD-S 30135 press brake was manufactured in 2006. It features a ModEva 10S control unit and has accumulated 39,801 working hours. With a bending length of 3050mm and a tonnage capacity of 135t, it's designed for robust performance. Consider the opportunity to buy this Durma AD-S 30135 press brake. Contact us for more information. Additional equipment Bljdoyaincspfx Amzsk • Additional Tool Set: Sold separately Machine Benefits Technical Machine Benefits • Cnc operated axes: y1, y2, x, r (3-axis press brake) / manually operated axes: z1, z2 • Bending length: 3050 mm / tonnage: 135 t

Condition: used, HSA module 45/60 / 76A 6SN1135-1DA13-0GA0 Sinumerik 840C was taken from a STAMA MC 330 machining center. Works flawlessly. Bodpfxjylz Hze Amzjlk

Condition: ready for operation (used), Year of construction: 2000, pressure 85.0 t chamfer lenght 2050 mm distance between columns 1650 mm column arm 400 mm stroke 240 mm dayligth 320 - 560 mm ajustment speed 150 mm/sec working feed 15.0 mm/sec return speed 150 mm/sec back stop - adjustable 5.0 - 1000 mm table width 110 mm work height max. 1050 mm operating pressure max. 297 bar compressed air 4.5 - 6.0 bar oil volume 200 l operating pressure 340 bar total power requirement 7.5 kW weight of the machine ca. 5900 kg Bsdpfxsxab Ugo Amzjlk range L-W-H 4100 x 2100 x 2750 mm with increased installation height / piston stroke well-maintained condition (!!) - in checked condition - machine video - ?v=ikl6RNZWeiU Equipment: - CNC electro-hydraulic press brake - including CYBELEC CNC control * swiveling control panel at the front right * external screen - CNC axis adjustment: Y1 - Y2 - X - R - Z1 - Z2 - I + CNC crowning - CNC electro-motorized back stop (X axis) * Travel range .. 5.0 - 1,000 mm * Travel speed .. 250 mm/sec. - CNC electro-motorized height adjustment of the back stop (R axis) * Travel range .. 70 - 235 mm * Travel speed .. 100 mm/sec. - CNC electro-motoric adjustment of the stop fingers (Z axes) * Travel range Z1 .. 405 - 1.565 mm * Travel speed .. 1.000 mm/sec. * Travel range Z2 .. 485 - 1.645 mm * Travel speed .. 1.000 mm/sec. - CNC electro-motoric table crowning - CNC pneumatic die displacement (I axis) - EHT pneumatic tool clamping - upper tool - EHT manual tool clamping - lower tool * Tool holder 90.0 mm + 13.0 mm possible - 1x freely movable 2-hand/foot control - 2x front, stable support arms including "sliding system" - side protective device (swinging doors) - rear protective device (swinging door) - original operating instructions + circuit diagram etc. * Special accessories included: - Oil cooler for use in continuous operation

Condition: used, Year of construction: 1985, sheet width 3100 mm plate thickness 4.0 mm thickness at "Niro-steel" 2.5 mm cutting angle adjustment 1.0 ° back stop - adjustable 10 - 1000 mm adjustment speed 180 mm/s down holder 21 Stück strokes per minute 18 - 31 oil volume 160 L Control ELGO P8511 column arm 200 mm distance between columns 3050 mm 0 max. 300 bar voltage 400 V main drive 9.0 kW weight of the machine ca. 4800 kg. dimensions of the machine ca. 3660 x 2070 x 2140 mm from a maintenance workshop Equipment: - electro-hydraulic sheet metal shear "swing cut" - machine frame = all-steel welded construction - ELGO NC control model P8511, control panel at the front left Bljdpfxoxab Tvj Amzsk * for positioning the electro-motoric rear stop * target/actual position value input possible * adjustment by three-phase motor via toothed belt - support table with ball rollers * there are recessed grips between the table plates - front finger guard - hydraulically acting sheet metal hold-down device - 1x freely movable foot switch - emergency stop button at the front - movable scrap switch - original operating instructions + circuit diagram Special accessories included: - EHT pneumatic sheet metal holding device for thin sheet metal cuts - 1x EHT extra long side stop 3.000 mm with mm scale & support foot - 1x EHT extra long support arm with 3.000 mm with scale & Support foot - EHT additional support arms with mm scale

Condition: used, Year of construction: 1992, pressure 125 t chamfer lenght 3100 mm distance between columns 2550 mm throat 250 mm stroke 120 mm ajustment speed 70.0 mm/sec working feed 7.0 mm/sec return speed 60.0 mm/sec dayligth 325 mm table width 180 mm work height max. 915 mm oil volume 150 ltr. total power requirement 12.5 kW weight of the machine ca. 9100 kg. range L-W-H 3200 x 1325 x 2470 mm well-maintained condition from a maintenance workshop (!!) Equipment: - simple, conventional electro-hydraulic press brake * with torsion shaft for parallelism of the upper beam - electro-motor-driven back stop, with ball screws (X axis) * with 2x manually adjustable stop fingers * fine adjustment via handwheel at the front, with analog position display - electro-motor-driven adjustment of the immersion depth (Y1+Y2 axis) * with digital position display - swiveling operation, left-hand side Bledjxaaulspfx Amzsk - split deer foot + pointing tool - 1x rotatable Multi V universal die block - 1x freely movable 2-hand foot control - operating instructions

Condition: used, empty load weight: 300 kg, maximum load weight: 1,050 kg, overall weight: 1,350 kg, loading space length: 2,510 mm, loading space width: 1,300 mm, loading space height: 1,500 mm, tire size: 195/70r14c, Sturdy, braked low-loader with a high cover, manufactured by ANSSEMS, model BSX1350 251x130. As standard equipment, the Anssems covered trailer with brakes features aluminum sideboards, a cover and frame, internal locking mechanisms, external lashing points, profile channels for mounting accessories or securing the load, a very stable welded steel frame, side rails, a front headboard, a front flap, pull-out supports for the tailgate, a support wheel, and a V-drawbar. We also offer accessories for Anssems car trailers, such as a flat cover, net hooks, a corrugated grid attachment, a sideboard attachment, a rear support set, a toolbox, lashing points, lashing straps, and a lock. --- You can find all our cost-effective offers on our website. Germany-wide delivery is possible (except for the islands)! Please ask us for the prices. --- PKW-Anhänger-Center Ahrens Moordeicher Landstraße 37 28816 Stuhr near Bremen Tel: 0 Fax: Bedpfx Amjgf Nxzezjlk Pick-up times: Monday - Friday – hours Pick-up is not possible on Saturdays!

Condition: used, Year of construction: 1994, sheet width / mm plate thickness / mm distance between columns / mm Manufacturer: EHT Type: TSS 20-25 Year of construction: 1994 Max. Cutting length: 2250 mm Max. Sheet thickness: 20 mm Bljdpfxouddh Ao Amzsk Strip width min / max: 10/1000 mm Distance between the consoles: 2530 Height above the ground: 900 mm Table length without extension arms: 3030 mm Oil volume: 800 l Max. Pressure: 280 bar Operating voltage: 400V Control voltage: 230 V. Nominal current: 87 A. Weight: 15.8 to Dimensions L x W x H: 3500 x 2500 x 2400 mm Accessories / special equipment Pneumatic cutting gap adjustment Cutting length limitation Roller conveyor elevation bracket Hand protection 1 bay Multitron control Multitron PS 80; ELCO 85 P Lower knife height adjustment

Year of construction: 1981, condition: good (used), Spindle motor for CNC lathe MAZAK SLAT TURN 30, year of manufacture 1981. Bjdpfxexr Dhyo Amzelk

Condition: used, functionality: fully functional, Year of construction: 1987, machine/vehicle number: 101536, Offered for sale is a hydraulic guillotine shear Manufacturer: Eisen und Hammerschmidt GmbH Model: TSS4-20 Year of manufacture: 1987 Serial No.: 101536 Capacity: 4 mm Working width: 2,000 mm Control: ELGO Type P8511 Light curtain system by SICK Used, fully functional condition. Collection by purchaser; assistance with dismantling/transport can be arranged if required. Bodpfxsx Da D Uo Amzelk — If you are interested or have any questions, please feel free to send me a message. Viewing on site by appointment possible. Further metalworking machinery such as bench drills, press brakes, column drilling machines, eccentric presses, heavy-duty racking, welding tables, MIG welders, compressors, etc. – please take a look at my other listings. Location for viewing and collection: 12277 Berlin Domestic price net plus VAT or Net export price Collection only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. Further photos and technical details available on request. All information is subject to change without notice. Errors and prior sale reserved. For further questions, please call Nous parlons Français / Мы говорим по-русски We speak English / Noi vorbim românește Viber / WhatsApp / Skype We handle all customs and registration matters for an additional charge. For an extra fee, we can transfer the vehicles to the port.

Condition: good (used), Filling, capping, and labeling line for "PET" bottles, designed for calm liquids such as oil, vinegar, juices, nectars, etc. The set includes the following components: 1) PROSPOMASZ MONO-30 piston filler - Adjustable output: up to 3,000 bottles (packages/hour) - Number of dosing heads: 8 - Number of capping heads: 4 - Bottle volume: 200 - 1000 ml - Package dimensions: ~ Diameter: 50 - 110 mm ~ Height: 150 - 330 mm ~ Minimum bottle neck diameter: 18 mm - Weight: 1,100 kg - Installed power: 0.75 kW - Year of manufacture: 2003 - Machine dimensions: ~ Length: 1,500 mm Bledpfxowyddys Amzok ~ Width: 1,150 mm ~ Height: 2,300 mm The machine is currently set up for 1000 ml bottles. Additional format change parts for 500 ml bottles included. The set also includes many spare parts and seals. 2) Foil labeler (hot-melt roll-fed) - Manufacturer: JAWOTECH s.r.o. - Model: Tech - Lab HM - Capacity: up to 4,000 bph - Weight: 300 kg - Installed power: 4.0 kW - Year of manufacture: 2018 - Machine dimensions: ~ Length: 2,000 mm ~ Width: 1,200 mm ~ Height: 1,800 mm Automatic hot-melt application system by NORDSON, professional grade. The machine is configured for labeling 1 L bottles. Other bottle sizes require entry component adjustment. 3) Slat conveyors with a total length of 850 cm. Used machines, fully operational, regularly serviced. Video footage of the machines in operation prior to disassembly is available. Photos show the current condition in our warehouse.

Year of construction: 1987, condition: ready for operation (used), An EHT hydraulic guillotine shear refurbished in 2023 is available. Cutting length: 3000mm, max. sheet thickness steel/VA: 4mm/2mm, backgauge: 10mm-1000mm, adjustment speed: 180mm/s, stroke rate: 18-31 strokes/min, oil volume: 160l. Machine dimensions X/Y/Z: approx. 3700mm/2100mm/2150mm, weight: approx. 4800kg, operating hours: 44024h. The cylinders, blades and hoses were overhauled in 2023. On-site inspection is possible. Bjdpfx Ajwrhwusmzslk

Year of construction: 2018, condition: excellent (used), Detection head 350 x 200 mm Useful height 145 mm Intralox belt 1350 x 300 mm With ejection of defective products in closed container Bljdpjtwq I Ejfx Amzsk Year of construction 2018

Condition: like new (used), Year of construction: 2017, functionality: fully functional, operating hours: 205 h, working width: 3,000 mm, control type: CNC control, degree of automation: automatic, For Sale: Salvagnini B3 ATA 135/3000 – Year 2017 A high-performance Salvagnini B3 ATA 135/3000 hybrid press brake from 2017 is available for sale. This model combines the precision of electric actuation with hydraulic power, ensuring rapid setup times, low energy consumption, and outstanding repeatability. Equipped with the ATA (Automatic Tool Adjuster) system, it is ideal for production environments requiring frequent tool changes and short-run batches. Key Features: - ATA Automatic Tool Adjuster for rapid tool configuration - Hybrid technology: energy-efficient, quiet operation, and excellent accuracy - High repeatability and fast cycle times - Suitable for both small-batch and serial production - Robust frame and premium Italian engineering Technical Specifications: - Maximum bending force: 135 tons Blsdpfx Aexykxnjmzok - Working length: 3000 mm - Table length: 3060 mm - Distance between side frames: 2640 mm - Throat depth: 435 mm - Approach/return speed: 250 mm/s - Bending speed: 15 mm/s - Maximum stroke: 350 mm - Table–ram opening: 600 mm - Total machine length: 4310 mm - Overall width: 1735 mm - Overall height: 3295 mm - Average energy consumption: 1.5 kWh - Machine weight: 11,700 kg - Year of manufacture: 2017 Highlights: - Quick setup thanks to ATA system - Very low operating costs - Hybrid drive ensures smooth operation and precise bending - Ideal for subcontractors, metal fabrication, and flexible production lines

Condition: new, Comparable to Durma, Baykal, Ermaksan, etc. Bending length: 3,020 mm Pressing force: 135 t Approach speed: 140 mm/s Bending speed max.: 10 mm/s Return speed: 130 mm/s Stroke: 320 mm Installation height: 550 mm Throat depth: 450 mm X-axis travel: 750 mm X-axis speed: 300 mm/sec R-axis travel: 250 mm R-axis speed: 100 mm/sec Clear distance between frames: 2,555 mm Machine length: 3,730 mm Machine width: 2,300 mm Total height: 2,850 mm Table height: 900 mm Motor power: 15 kW Oil tank: 190 l Machine weight: 9,500 kg Bodpfoq Rdtqox Amzjlk (Technical data may vary depending on equipment) Standard features: - 3 CNC axes (Y1, Y2, X) - Double-guided, stable, and precise ram - Robust, double-guided backgauge - Manually adjustable, double-guided stop fingers on linear guides - Adjustable front support arms with height adjustment - Lateral and rear safety covers - Lower die adapter rail, 60 mm - Manual upper tool clamping system (Promecam system) - Manual crowning - Foot switch with emergency stop - 380 V, 50-60 Hz, 3-phase - LED lighting Recommended options: - Dener DA 66T control - Fiessler AKAS 2M laser finger protection - FPSC Safety PLC (manual) - X and R axes with servomotors - CNC crowning for high bending accuracy - 2 additional stop fingers - Other working lengths and thicknesses available with suitable accessories! -

Condition: excellent (used), Year of construction: 1997, Rip and cross saw REMA DMLK 30 Bledpfxsfv Hpho Amzok Producer of REMA Machine model / type DMLK 30 Year of production 1997 Machine category Longitudinal and transverse saw Location Gorzów Wlkp. Conditions of delivery PERSONAL COLLECTION Cost of delivery Customer cover Startup type to be agreed Description Comments - after the technical review - very good condition - year of production 1997 TECHNICAL PARAMETERS: main engine 3.9 kW trolley length 1370 mm blade diameter 300 mm angle adjustment 0 - 45 " height adjustment cutting height max. 90 mm cutting width on the right side 885 mm ruler length 1350 mm ratchet extended receiving table two kinds of blade rotation speed 3700 and 5000 RPM The protractor visible in the photos is an additional option for PLN 400 net dimensions: length / width / height 135 x 85 x 135 cm weight ~ 320 kg

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, controller model: Cybelec ModEva 10S, empty load weight: 16,300 kg, bending force (max.): 170 t, working length: 4,050 mm, TECHNICAL DETAILS Press force: 170 t Bending length: 4,050 mm MACHINE DETAILS Control: Cybelec ModEva 10S Machine weight: 16,300 kg EQUIPMENT Lasersafe 2 sheet supports Die shifting Crowning Pneumatic tool clamping top and bottom Controlled axes: Y1, Y2, X, R, Z1, Z2 Bledpfx Amoxwnv Eezok Tool cabinet with tools

Condition: reconditioned (used), Year of construction: 1990, functionality: fully functional, controller model: Cybelec ModEva 12S, working width: 8,050 mm, bending force (max.): 320 t, distance between stands: 7,550 mm, Conversion 2009: - motorized die shift 111-112: mechanically and electrically NEW Bljdpjw Sttaofx Amzjk - Backgauge X-R: mechanical and electrical NEW - Automatic punch clamping: mechanical and electrical NEW - CNC control: mechanical and electrical NEW - Safety valves NEW - Measuring rulers NEW - Control valves Y1 - Y2 NEW - Main hydraulic pump NEW TECHNICAL DETAILS Pressure: 320 t folding length: 8050 mm Stand width: 7550 mm Control system: Cybelec ModEva 12S EQUIPMENT - CNC-controlled backgauge x-direction and R-direction - Motorized die displacement M1 and M2 - 2 x pneumatic bending aids at the front - Pneumatic sheet holding unit - Automatic tool clamping at the top - motorized crowning

Year of construction: 1998, condition: good (used), functionality: fully functional, machine/vehicle number: 107856, new seals on hydraulic cylinders TECHNICAL DETAILS material length: 6050 mm sheet thickness: 6 mm (450 N/qmm) passage: 6050 mm upright projection: 100 mm Control system: ELGO P8721 number of support arms: 4 stop range (from cutting line): 10 - 1000 mm Adjustment speed: 70 mm/s MACHINE DETAILS machine length: 7000 mm machine width (without support arms): 2350 mm machine width with supporting arms: 3440 mm machine height: 2550 mm Machine weight: 21000 kg Oil tank. 300 l Connected load: 18 kW Material: aluminum 1,2 mm Bodpfxsl N Ufyo Amzolk EQUIPMENT motorized backgauge 1 side stop sheet holding-up system

Condition: new, Year of construction: 2026, neu 2026 080186 prompt, Zwischenverkauf v Türkei 81476 € 1309.77 € 1 69300 € 135 to 3050 mm Y1 / Y2 / X und RAchse 265 mm 2600 mm 450 mm 530 mm hydraulisch 160 mm/s 10 mm/s 120 mm/s 500 mm 500 mm/s 350 mm/s 250 mm 900 mm 150 l 15 kW 4250 mm 1700 mm 2850 mm 9580 kg Special campaign Special price and SKY 22 control free of charge Standard accessories: 4 axes (Y1, Y2,X and R) CNC control SKY 22 - intuitive touch-screen control (simple drawing of the bending outline with your finger) 21,5“ in full HD - with 2D and 3D working screen - direct programming of the bending angle - user friendly programming in dialogue form optionally in 2D or 3D mode - 2D and 3D simulation of the bending sequence - automatic tool selection in 3D mode - automatic calculation of the blank sheet size Bsdpfx Ajwirtnemzjlk - bending order calculation - graphic product and tool memory - correction possibility - USB and Ethernet interfaces for import, backup and programm transportation - OS: Windows - IGES, STEP, DXF files import servo motorized back gauge on linear guides and ball screws back gauge finger blocks on double linear guides CNC crowning table upper tool 1010/A /75°/0.8/105, devidedand cranked 4-V die block 60x60 2009 (V = 16,22,35 and 50 mm) laser safety device Fiessler AKASmounted on the upper beam linear guided sheet support arms according to CE rules oilfilling users manual in English or German ADVANTAGES OF AD-S COMPAIRED TO PBF: - more stroke, installation height and throat - higher approach and retraction speed of the top beam - higher backgauge speed - backgauge finger on double instead of single linear guide - more options available such as: additional backgauge axes (e.g. Z1/Z2, Delta X, up to 6 axes), bending aids, laser angle measuring system, tandem design, other CNC controls ...