Used Engel Engel Insert 200 V / 60 Rotary (2013) for sale (61,602)

Condition: ready for operation (used), Siemens 1FT6084-8AH71-3EG1 synchronous servo motor, serial number: YFL897214602008, used, in good condition, 100% functional, scope of delivery as shown in the photos. Rjdey U Eg Sepfx Ammou

Condition: excellent (used), Year of construction: 2015, ENGEL victory 650/120 tech (25.109 h) (S&P 3793) Manufacture year: 2015 Redpfey Uka Djx Ammju Operating hours: 25,109 Stunden Screw: 35 mm Injection pressure: 2400 bar Stroke volume: 192 cm³ Clamping Force: 120 t Tie bar distance: 740 x 680 mm Mould installation height min.: 300 mm Plate distance max.: 800 mm Dimensions: 5100 x 1500 x 2350 mm Eeight: 7000 kg Connected load: 22 kW Automatic door, Corepuller 1x, Airvalve, Hotrunner, price when new 122.000,- € etc... Price: on request contact: Mr. Ralf Schulz

Condition: excellent (used), Year of construction: 2018, ENGEL duo 8160H/860W/1700 combi Machine type: ENGEL duo 8160H/860W/1700 combi Year: 2018 Machine version: 2-component machine Injection unit arrangement: H/W arrangement, one above the other, distance 300 mm Clamping force: 17,000 kN Min./max. mould height: 800 / 1,600 mm Max. opening stroke: 2,550 mm Max. platen distance: 3,350 mm Rotary table diameter: 2,250 mm Mould weight: DS: 30,000 kg AS with rotary table: 21,590 kg Total: 36,586 kg AS without rotary table: 25,790 kg Rotary table weight: 4,200 kg Injection unit 1 / 3660H Nozzle: hydraulic shut-off nozzle Nozzle radius: R35 Nozzle bore: Ø8 mm Screw diameter: 105 mm Max. stroke volume: 4,070 cm³ Max. shot weight PC-ABS: 4,600 g Max. shot weight PP: 3,700 g Max. shot weight PA6 GF30: 5,500 g Max. shot weight TPU: 4,960 g Rsdpfezatkhsx Ammsu Injection unit 2 / 500W Nozzle: open nozzle Nozzle radius: R35 Nozzle bore: Ø4 mm Screw diameter: 50 mm Max. stroke volume: 432 cm³ Max. shot weight TPV 55 Shore: 390 g Max. shot weight EPDM 65 Shore: 483 g Tie bars / platens Tie-bar spacing horizontal: 1,850 mm Tie-bar spacing vertical: 1,415 mm Tie-bar diameter: 265 mm Centring rings Nozzle side: 1K Ø250 mm / 2K Ø200 mm, pitch 300 mm Ejector side: Ø250 mm Centring groove DS: 300 mm below nozzle centre, 100 × 32H8, depth 18 mm Ejector Max. ejector stroke: 300 mm Central ejector: without Thread: M20 Ejector rod diameter: Ø50 mm Limit monitoring connector: 4-pin Core pullers AS: 4× + 1× proportional valve DS: 4× + 1× proportional valve Core in: SKM13IR3 / alternative SKM10IR2 Core out: SKS13IR3 / alternative SKS10IR2 Limit monitoring connector: 16-pin according to Euromap 13 Valve gate control Hydraulic: 16-fold / SKM10IR2 / SKS10IR2 Pneumatic valves Ejector side: 1× blow function Nozzle side: 1× blow function Mould temperature control Ejector side: 16 circuits Nozzle side: 16 circuits Machine-side water connection: Hasco N9 Tool-side water connection: USA system DME N9 / alternative N6 Mould heating 64 control zones 8 plugs for sensors and heating 16-pin Robot / handling Robot: ENGEL viper 60-RC 300 Travel Z: 3,320 mm Travel X: 1,500 mm Travel Y: 2,600 mm C-axis: 210 Nm B-axis: 210 Nm Automation Conveyor belt for parts deposit Belt width: 1,600 mm Light barrier Special features iQ weight control Gas-assisted processing / blowing agent processing Injection compression moulding Cavity pressure sensors MuCell prepared, not yet installed Electrical data Main connection A: 3×400V + N + PE / 50 Hz Nominal current A: 0 A Rating A: 250 kW Main fuse A: 630 A Short circuit current rating: 10,000 A Control voltage: 230V AC / 24V DC Main connection B: Nominal current B: 210 A Rating B: 150 kW Main fuse B: 250 A

Condition: used, mileage: 129,748 km, power: 345 kW (469.07 HP), first registration: 04/2021, fuel type: diesel, empty load weight: 12,435 kg, maximum load weight: 13,565 kg, overall weight: 26,000 kg, tire size: 385/65 22,5, tire condition: 40 %, axle configuration: 6x2, wheelbase: 4,800 mm, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2021, operating hours: 129,748 h, front tire size: 385/65 22,5, rear tire size: 385/65 22,5, Equipment: ABS, air conditioning, cabin, cruise control, differential lock, fog lights, onboard computer, parking heater, sliding door, trailer coupling, truck registration, Reference no. for inquiries: 40201 Volvo FH 460 * Year of manufacture: 2021 * ABS, Anti-lock Braking System * Trailer coupling * EBS, Electronic Braking System * Power windows * Cab * Automatic climate control * Air suspension * Lift axle * Power steering * Heated seats * Auxiliary heater * Cruise control * On-board computer * Differential lock * Rear-steering axle * Duomatic air connection * 2x7-pin connector * 15-pin connector * Digital tachograph * CB radio * Distance keeping assistant * OBU pre-equipment * Refrigerator * Electric windows & mirrors * AdBlue tank * Fog lights Redpfoy Ar Dysx Ammeu * Comfort suspension seat * Toolbox * Multifunction steering wheel * Lane change warning * Hydraulic locking * Transmission type: Automatic * Suspension: Leaf / Air * Perm. total weight: 26,000 kg * Curb weight: 12,435 kg * Payload: 13,565 kg * Perm. total weight: 26,000 kg * Tyre condition 1st axle: 40% -- 40% - Tyre size: 385/65 R22.5 * Tyre condition 2nd axle: 40%|40% -- 40%|40% - Tyre size: 385/65 R22.5 * Tyre condition 3rd axle: 30% -- 30% - Tyre size: 385/65 R22.5 * Wheelbase: 4,800 mm * Tyre sizes: 385/65 R22.5 * Body: VDL S-21,6200 * Hydraulic container locking * Extendable underrun protection * Additional spotlights * Beacon lights * Engine PTO (power take-off) * On request, we will be happy to send you a video and additional photos. Disclaimer: Subject to change, prior sale and errors excepted. Further pictures and videos can be found on our website. Our comprehensive services include, for example: * Purchase / sale / rental of commercial vehicles * Fast and uncomplicated financing * Handling of all (export) documents * Arranging export / customs license plates * Vehicle preparation: new tarpaulins, lettering, painting, etc. * Professional loading / load securing * TÜV inspections, registration service * Transfer of commercial vehicles Please contact our trained sales staff, we will be happy to advise you.

Condition: not inspected (used), Year of construction: 2010, machine/vehicle number: 61015538, This Engel injection molding machine, model victory 1050/220 tech, manufactured around 2010, will be auctioned off in our online auction "Site Closure Wirthwein Friedberg GmbH & Co. KG - Machines, Tools, Workshop Equipment, etc." along with an MB Conveyors conveyor belt, manufactured in 2012, and a motan mixing unit, manufactured in 2024. You can find this and many other items from the field of injection molding technology, production & workshop equipment, temperature control units, lifting technology, eroding machines, measuring instruments, transport & social area equipment, etc. on our RESTLOS auction platform! Engel injection molding machine Nameplate data: Manufacturer: Engel No.: 177100 Year of manufacture: 2010 (partially covered, presumably) Type: victory 1050/220 tech Weight: 12,200 kg motan mixing unit Nameplate data: Manufacturer: motan holding Designation: Mixing unit Model: Mixing module - 2l - MB Rated voltage (UN): 24 V DC Control voltage (Us): 24 V DC Current (IL): 2.7 A Max. weight (mmax): 8 kg Year of manufacture: 2024 Serial number (SN): 677A01A24 14293 RA: BM02A Rodpfxsy Uzdas Ammeu CE marking: present UKCA marking: present MB Conveyors conveyor belt Nameplate data: Manufacturer: MB Conveyors Model: N-CPR LOW-COST Year of manufacture: 2012 Registration No.: B20032 Voltage: 400 V CE marking: present as shown in the pictures without any other items shown in the pictures Functionality untested

Condition: used, mileage: 236,195 km, power: 90 kW (122.37 HP), first registration: 05/2010, fuel type: diesel, overall weight: 12,000 kg, axle configuration: 2 axles, color: white, gearing type: mechanical, emission class: euro5, loading space length: 6,100 mm, loading space width: 2,300 mm, loading space height: 2,400 mm, Equipment: air conditioning, tail-lift, * DAF 45.160 EEV 4x2 * Leaf spring suspension at the front * Air suspension at the rear * Flatbed with tarpaulin Rodpfx Amsy U S Ucjmeu * Palfinger tail lift, max. 2000 kg * Body length: 6.10 m * Body width: 2.45 m * Body height: 2.40 m * Manual transmission * Engine displacement: 4462 cm³ * Power: 117 kW / 159 hp * Tare weight: 5510 kg * Payload: 6105 kg * Gross vehicle weight: 12000 kg * Wheelbase: 4300 mm * VIN: XLRAE45FF0L357997 * Euro 5 EEV * Year of manufacture: 2009 * Tel./WhatsApp:

Condition: used, mileage: 76,695 km, power: 115 kW (156.36 HP), fuel type: diesel, overall weight: 3,180 kg, maximum load weight: 1,080 kg, first registration: 04/2010, emission class: euro4, number of seats: 3, ORIGINAL PANELED VAN RIGHT HAND DRIVE HIGH ROOF MEDIUM WHEELBASE LOADING COMPARTMENT MEASURES: LENGTH =3.5m WIDTH=1.85m HEIGHT=1.94m SINGLE WHEEL CAPACITY 1080KG GVW: 3180KG EMISSION: EURO 4 For information Rsdsv S I Alspfx Ammou

Condition: good (used), Year of construction: 2001, Ref. no.: 18092 Manufacturer: ENGEL Type: ES 1350H 200W / 300HL-2F Year of construction: 2001 Clamping unit Clamping force: 300 ton Opening stroke: 855 mm Platen size (h x v): 1050 x 650 mm Injection unit Screw diameter: 60 +35 mm Injection volume: 735 +135 cm³ Shot weight: 662 + 122 g Injection pressure: 1834 +1620 bar Measurements and weight Dimensions: 7,75 x 2,35 x 2,6 m Machine weight: 24780 kg Further information: ENGEL ES 1350H200W/300HL-2F — 2K Injection Moulding Machine This machine from the prestigious Austrian manufacturer ENGEL, built in 2001, features a clamping force of 300 tonnes and a true 2K L-configuration in horizontal layout. Redpfx Amswm Iy Eomju Motor and Hydraulic System The machine is equipped with a powerful electric motor coupled to a high-pressure hydraulic pump group. The electric motor continuously drives the hydraulic pump, providing pressurised oil flow throughout the entire system. This pressurised oil feeds the clamping cylinder, the injection pistons of both units, and the ejector system. The thick red hydraulic hoses visible behind Unit B carry this high-pressure oil flow — both units are supplied via independent hydraulic circuits, allowing Unit A and Unit B to operate simultaneously without influencing each other. Operating Principle The two independent injection units are positioned at 90° to each other — in an L-shape. The mould is locked with 300 tonnes of clamping force. Unit A injects the primary material into the mould at 1834 bar. Immediately afterwards, Unit B injects the second material or colour from a 90° angle into the same mould at 1620 bar. The two materials bond at a molecular level inside the mould, cooling is completed and the ejectors push out the finished 2K part as a single piece. No gluing, screwing or assembly is required — two materials emerge as one single part in a single cycle. Applications Automotive interior and exterior trim parts, large technical plastic components, parts combining a rigid body with a soft grip surface, two-colour large-surface parts.

Condition: ready for operation (used), Center distance: 2000mm, center height: 280mm, swing over bed: 560mm, swing over gap: 785mm, swing over carriage: 350mm, bed width: 350mm, spindle bore: 105mm, spindle speed range: 25-200/ 200-1500rpm, longitudinal feed range: 0.059-1.646mm/rev, cross feed range: 0.020-0.573mm/rev, metric threads: 0.2-14mm, quill diameter: 75mm, quill travel: 180mm, quill taper: MT 5, motor power: 7.5kW, length: 3340mm, width: 1150mm, height: 1460mm, weight: 2.72t. Equipment: 3-axis digital readout ES-12 V with LCD display, 3-jaw chuck PS3-315mm / D8, max. steady rest passage diameter: 180mm, max. follow rest passage diameter: 120mm, foot pedal with brake function according to CE, protective device for quick-change tool post, LED machine light, initial filling with Shell Tellus 46, two center points, frequency inverter, digital speed display, slip clutch, rapid traverse longitudinal and cross, coolant system, quick-change tool post with 4 holders, change gears, reduction sleeve, chip splash guard, operating tools. An on-site inspection is possible. Rodpfjy Tx Nwsx Ammsu

Condition: like new (used), Year of construction: 2024, clamping force: 2,700 kN, ENGEL DUO 36060/2700 TECH Manufacturer: ENGEL Model: DUO 36060/2700 TECH Clamping Force: 2,700 t (27,000 kN) CLAMPING UNIT Clamping force: 27,000 kN Opening stroke: 3,300 mm Max. daylight: 4,100 mm Min. mould height: 800 mm Max. mould height: 2,200 mm Tie bar spacing (H × V): 2,180 × 1,750 mm Platen dimensions (H × V): 2,970 × 2,640 mm Opening force: 770 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.6 s INJECTION UNIT Screw diameter: 190 mm L/D ratio: 25:1 Screw stroke: 850 mm Shot volume: 24,100 cm³ Theoretical shot weight PS: approx. 21.9 kg Injection rate: 2,620 cm³/s Injection pressure (regenerative): 1,300 bar Maximum injection pressure: 1,600 bar Screw speed: 85 rpm Maximum screw speed: 100 rpm Screw torque: 24,000 Nm Reduced torque at max. speed: 20,400 Nm Plasticizing rate (3-zone screw): 238 g/s Plasticizing rate (barrier screw): 296 g/s Rodpfxoy U Hu Rj Ammsu NOZZLE Nozzle stroke: 1,300 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 12 Installed heating power: 160.9 kW DRIVE UNIT Installed motor power: 355 kW Reload pump motor: 3 kW Hydraulic oil tank capacity: 3,500 l COOLING REQUIREMENTS Cooling capacity: 66.9 kW Water consumption (32°C inlet): 5.88 m³/h Options: Engel VIPER 90 robot Rectable tie bar (movable) Hotrunners: 160 cores: 3+3 Cascades: 72

Condition: like new (used), Year of construction: 2024, clamping force: 24,000 kN, ENGEL DUO 23060/2400 TECH Manufacturer: ENGEL Redpey U Hphjfx Ammsu Clamping Force: 2,400 t (24,000 kN) CLAMPING UNIT Clamping force: 24,000 kN Opening stroke: 3,200 mm Max. daylight: 4,000 mm Min. mould height: 800 mm Max. mould height: 2,000 mm Tie bar spacing (H × V): 2,020 × 1,620 mm Platen dimensions (H × V): 2,700 × 2,430 mm Opening force: 614 kN Opening force with pressure pad: 1,600 kN Dry cycle time (Euromap 6): 5.4 s INJECTION UNIT Screw diameter: 150 mm L/D ratio: 25:1 Screw stroke: 680 mm Shot volume: 12,020 cm³ Theoretical shot weight PS: approx. 10.9 kg Injection rate: 2,121 cm³/s Injection pressure (regenerative): 1,601 bar Maximum injection pressure: 1,900 bar Screw speed: 90 rpm Maximum screw speed: 115 rpm Screw torque: 18,600 Nm Reduced torque at max. speed: 14,550 Nm Plasticizing rate (3-zone screw): 235 g/s Plasticizing rate (barrier screw): 322 g/s NOZZLE Nozzle stroke: 1,100 mm Nozzle contact force: 210 kN EJECTOR Ejector stroke: 400 mm Ejector force forward: 420 kN Ejector force return: 420 kN HEATING SYSTEM Heating zones incl. nozzle: 10 Installed heating power: 97.4 kW DRIVE UNIT Installed motor power: 265 kW Hydraulic oil tank capacity: 1,600 l COOLING REQUIREMENTS Cooling capacity: 45.2 kW Water consumption (32°C inlet): 6.6 m³/h Cores: 3+3 Heating zones: 160 Cascades: 56

Condition: new, Year of construction: 2025, power: 260 kW (353.50 HP), motor manufacturer: Battery System: LIFePO4, General information Field of application: Construction Weights Empty weight: 5.787 kg Functional Generator capacity: 260 kVA Dimensions of cargo space: 278 x 185 x 228 cm CE mark: yes Other information Frequency: 50 Voltage: 400 Drill equipment: Tank, Control Panel Emission level: Stage V / Tier V Redpfxow A Haie Ammeu Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel - Tank

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Perkins 4016TAG1A, General information Field of application: Construction Weights Empty weight: 5.847 kg Rsdpfxoyqmhne Ammeu Functional Generator capacity: 2.000 kVA Dimensions of cargo space: 575 x 230 x 302 cm CE mark: yes Other information Fuel consumption: 277.6 Liter at 75% Load Generator: Leroy Somer LL9224F Frequency: 50 Voltage: 400 Drill equipment: Control Panel Production country: CN Additional information Please contact Team DPX for more information = Additional options and accessories = - Control Panel

Condition: excellent (used), Year of construction: 2007, operating hours: 102,000 h, clamping force: 6,500 kN, DUO 5550/650 Advanced Year 2007 Clamping force: 6500 kN Screw: D90, S6, tempered, with flight armouring and ionitriding, abrasion resistant Control unit: CC200 A01 Languages: Slovenian (SL), German (DE) Operating hours: 102,000 1x core mowing platen 1x core pull, additional, on movable platen Mold height increase of 200 mm Variant C, according to the technical sales manual (Min. mold height remains standard, max. mold height increases, platen stroke remains standard, max. platen distance remains standard) Connections for external filter station 8x mold heating control Expansion module for 8 temperature measuring or control points Standard 8-way cooling water flow regulator (0-10 l/min) Rsdey Ug Ahopfx Ammou Cooling water flow regulator, 10-way Magnetic mold clamping platen system TECNOMAGNETE, temperature resistant up to 120 degrees C, incl. interface Euromap 70.1, nozzle adaptation and assembly ENGEL ROBOTER TYPE ERC 63-F X-Max. travel distance: 100 mm Total Y-axis length: 900 + 900 mm (tandem) Z-total: 2360 mm C-axis (125 Nm) 2 switchable vacuum/compressed air circuits RC 200 integrated with C30 E handheld control unit

Condition: ready for operation (used), Siemens 1FT6084-8AH71-3EG1 synchronous servomotor, serial number: YFM712281102003, used, good condition, 100% fully functional, scope of delivery as per photos. Rjdpfxjy Srkro Ammju

Condition: good (used), Year of construction: 2004, Ref. no.: 18255 Manufacturer: ENGEL Type: Victory 750 / 180 tech Year of construction: 2004 Clamping unit Clamping force: 180 ton Opening stroke: 750 mm Distance between tie bars: 960 x830 mm Mould height min.: 500 mm Opening width: 1250 mm Injection unit Screw diameter: 45 mm Injection volume: 318 cm³ Rodpfxswm Iz Ne Ammeu Shot weight: 302 g Injection pressure: 1769/2360 bar Measurements and weight Machine weight: 13500 kg Robot Producer: Wittman Type: W743 Year: 2009 Further information: ENGEL Victory 750/180 Tech – Power, Flexibility and Reliability with Tie-Bar-Less Technology The ENGEL Victory series was specially developed for technical plastic processing and is known as a professional injection moulding machine series offering high energy efficiency and maximum mould flexibility. Unlike conventional tie-bar machines, this series provides a much more flexible working area thanks to its tie-bar-less clamping system. ⸻ 🔍 Advantages of the ENGEL Victory Series ✔ Tie-Bar-Less Design The biggest advantage of the world-renowned ENGEL Victory series is its tie-bar-less construction. This system offers several important advantages: • Larger moulds can be installed easily • Easier access for complex mould geometries • Reduced mould changeover times • Easier robot integration • More efficient use of production space This technology is especially advantageous for automotive, technical plastic parts, packaging and industrial applications. ⸻ ✔ Wittmann Robot Integration The machine has been operated together with a Wittmann robot. Robot specifications: • Wittmann W743-0424 • Year of manufacture: 2009 • Payload capacity: 25 kg • X-axis: 1200 mm • Y-axis: 1600 mm • Z-axis: 4000 mm This configuration provides major advantages for automated production processes. ⸻ 🔍 Machine Operating System The ENGEL Victory Tech series operates with a servo-hydraulic system. ✔ Hydraulic System: • Clamping unit • Injection movements • Ejector system • Mould movements are driven by a high-performance hydraulic system. ✔ Thanks to the servo-controlled hydraulic system: • Only the required amount of energy is consumed • Power consumption is significantly reduced • Quieter operation is achieved • Production stability is improved Unlike older conventional hydraulic machines, the machine does not run continuously at full power. The servo pump system operates only when needed, providing the following advantages: • Lower energy costs • Reduced heat generation • Longer component lifetime • More stable processing conditions

Condition: new, Year of construction: 2025, 600 mm 500 mm 400 mm 1000x500 mm 1200x250 mm Rodewp Tqbjpfx Ammsu 40-3200 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2025, 600 mm 500 mm Redpewp Trrsfx Ammju 400 mm 1000x500 mm 1200x250 mm 40-3200 U/min DIN 2080 ISO 40

Condition: new, Year of construction: 2026, 600 mm 500 mm 400 mm 1000x500 mm 1200x250 mm 40-3200 U/min Rjdpeyiu Rzofx Ammsu DIN 2080 ISO 40

Condition: new, Year of construction: 2023, 600 mm 500 mm 400 mm 1000x500 mm Rjdpfx Ajwp Tm Asmmsu 1200x250 mm 40-3200 U/min DIN 2080 ISO 40

Condition: ready for operation (used), Siemens 1FT6082-1AF71-3AG1 synchronous servomotor SN: EJ393759602001, used, in good condition, 100% functional, scope of delivery as shown in the photos. Rodpfx Amsw Erayjmeu

Condition: ready for operation (used), Year of construction: 2002, operating hours: 14,500 h, functionality: fully functional, clamping force: 2,500 kN, screw diameter: 60 mm, displacement volume: 735 cm³, injection pressure: 1,481 bar, injection weight: 662 g, mold height (min.): 250 mm, ejector stroke: 250 mm, plate length: 650 mm, plate width: 1,050 mm, installation height: 850 mm, Machine in operational condition. Includes handling robot from ENGEL. Rjdoyuayrepfx Ammsu

Condition: used, Year of construction: 2022, operating hours: 7,148 h, functionality: fully functional, machine/vehicle number: 252315, clamping force: 17,000 kN, screw diameter: 120 mm, displacement volume: 7,729 cm³, mold height (min.): 800 mm, ejector force: 230,000 N, ejector stroke: 300 mm, opening stroke: 2,550 mm, plate length: 2,420 mm, plate width: 2,170 mm, pressure: 2,300 bar, type of input current: three-phase, input frequency: 50 Hz, For sale is a modern and fully equipped production cell consisting of an ENGEL DUO 12060/1700 hydraulic injection molding machine and an ENGEL VIPER 60 RC300 Integrated linear robot. The machine was manufactured in 2024 and is designed for the production of large technical parts, automotive components, industrial containers, and parts with high quality requirements. ENGEL DUO 12060/1700 Injection Molding Machine Key parameters: - Clamping force: 17,000 kN (1700 tons) - Injection unit: 12060 - Screw diameter: 120 mm - Injection volume: up to 7729 cm³ - Injection pressure: up to 2300 bar - Injection rate: up to 1875 cm³/s - Opening stroke: 2550 mm - Maximum mold platen distance: 3350 mm - Platen dimensions: 2420 × 2170 mm - Drive power: 176 kW Rjdpfsy Tuhiex Ammou - Control system: ENGEL CC300 - Control language: Polish / English Machine equipment: - ENGEL ecodrive servo hydraulics energy-saving system - iQ weight control - iQ clamp control - iQ melt control - Autoprotect process monitoring - 92-zone mold heating control - Hydraulic and pneumatic core pulls - Ceramic heaters - Cylinder insulation - ecograph / ecobalance system - MES preparation – EUROMAP 77 / OPC UA - Complete Euromap interfaces - Extended mold cooling - Special design for the automotive industry - PL documentation - Special industrial ENGEL coating Includes ENGEL VIPER 60 RC300 Integrated robot Complete automation of production integrated with the machine. Robot parameters: Model: ENGEL VIPER 60 RC300 - Payload: up to 47 kg - Z-axis stroke: 4280 mm - X-axis stroke: 1800 mm - Y-axis stroke: 2600 mm - Servo axes B and C - Full integration with CC300 - HOP C10 operator panel - Automatic lubrication - PL/EN control - FB100 conveyor belt included - Complete safety guarding

Condition: ready for operation (used), Siemens 1FT6082-8AH71-4EG1 servo motor, SN: YFT130495602003, used, in good condition, 100% functional, scope of delivery as per photos. Rodpfey Rchrox Ammeu

Condition: ready for operation (used), Control panel for OKK MCV-500 machine with Fanuc A860-0200-T021 pulse generator, used, good condition, fully functional, scope of delivery as shown in the photos. Rsdoy Rci Njpfx Ammsu