Used Eugen Laegler Floor Grinding for sale (11,950)

Condition: used, Year of construction: 1987, Technical details: grinding length: 600 mm grinding width: 350 mm workpiece height: 600 mm feed: 1 - 30 m/min magnetic plate size: 610 x 255 mm distance table - spindle center: min./max. 150 / 420 mm grinding spindle speed: 3000 U/min stroke of the table: min./max.: 200 / 650 mm total power requirement: ca. 4,0 kW Pedpfeu Ngicex Afgopt weight of the machine ca.: 2,5 t dimension machine xH: 1,5 x 1,9 x 2,0 m dimension coolant device LxWxH: 0,63 x 0,40 x 0,65 m Headstock: -vertical travel Y = 0.002 - 0.06 mm -adjustment = 0,001 - 2mm Cross slide: -transverse travel Z = 360mm -feed adjustment = 1 - 60mm/stroke -rapid traverse = 1.2 m/min. Dressing manual Cooling water unit with capacity 140Liter Equipment: -3x support feet -machine lighting accessories: -alignment device for grinding wheel holder *

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine xH: 1,28 x 1,0 x 1,75 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed Ppjdpfxeu Ngrqj Afgjt *

Condition: used, Technical details: grinding length: 630 mm grinding width: 250 mm workpiece height: 300 mm Table dimensions: 2050 x 340 mm magnetic plate size: 600 x 250 (110V) mm feed range: Tisch: 0,005 - 0,045 mm/Hub Psdpfx Afsu Ngkmogspt feed of spindle: 0,001 - 0,045 mm/Hub dimensions of grinding wheel: Ø 220 x 46 mm total power requirement: 8,5 kW dimension machine xH: 2,1 x 1,8 x 1,9 m dimension coolant device LxWxH: 0,8 x 0,31 x 0,5 m -Longitudinal table stroke = 700mm -transverse travel of table = 800mm Coolant pump *

Condition: used, Year of construction: 1984, Technical details: grinding length: 500 mm grinding width: 250 mm workpiece height: 250 mm table surface area: 530 x 200 mm magnetic plate size: L:460 x B:150 x H:87 mm table speed: 2 - 32 m/min table adjustment: Längsweg: 550 mm table adjustment: Querweg: 300 mm feed of spindle: 0,001 mm/Hub grinding spindle speed: 3.000 U/min dimensions of grinding wheel: max. Ø 250 x B:25; Bohung Ø 76 mm total power requirement: 4,3 kW weight of the machine ca.: 2,2 t dimension machine xH: 2,3 x 1,8 x 2,2 m dimensions of hydaulic: L: 500 x B: 480 x H: 680 mm dimension coolant device LxWxH: 0,65 x 0,45 x 0,8 m The machine is currently equipped with a grinding wheel Ø 240 x 22mm. On the table there is a permanent magnet plate with 30 induction fields, operated by a hand lever. Operation via swiveling control panel. Podou Ngkyopfx Afgjpt no dressing device incl. oil collecting tank; grinding wheel holder and available documentation *

Condition: used, Year of construction: 1994, Technical details: grinding diameter: 198 mm grinding length: 200 mm z-axis: längs:240 mm Ppedpfeu Ng A Nox Afgst x-axis: quer: 340 mm control: Tschudin CNC E 9034B grinding wheel diameter: 500 mm centre height: 100 mm Distance between centres: 300 mm max. workpiece weight between centres: 100 kg interface: RS 232 total power requirement: 16 kVA weight of the machine ca.: 4,5 t space requirement of the machine approx.: L:3,1xT:3,2xH:2,0 m Plunge type grinding automatic technical specifications: - grinding spindle tool intake: 203,2mm - grinding spindle not swiveling - workpiece spindle swivelling : +30° to -90° - tailstock collet cone = MK 3 - control: ISO - and graphically programing equipment: - electronical balancing device : AB 100 T.K. - grindig wheel changing aid - grinding disc dressing device (also for grinding forms programable) - cooling system with paper filtering system - Measuring device (out of function, integrated measuring control not connected) *

Condition: used, Technical details: swing diameter: 200 mm centre distance: 450 mm cross travel: 245 mm longitudinal feed: 830 mm table speed: 0,05-4,5 stufenlos m/min revolution per minute: Schleifspindel 1780, 2050 U/min revolution per minute: Werkstückspindel 50-500 U/min dimensions of grinding wheel: 350x32x127 mm Table dimensions: 2200x280 mm table swivelling to both sides: 9°vor+10°zurück Grad total power requirement: 6,0 kW weight of the machine ca.: 2,2 t dimensions of machine: 2,2x2,05x1,6 m Universal Center Grinding Machine without internal grinding device! - for precision grinding of outer, inner such as cone surfaces Ppedpfx Aeu Ng Dgjfget - feed of grinding headstock via hydr. or manual possible - table feed hydraulic stepless - grinding spindle swivelable with 60 degrees - workpiece headstock 90 degress swiveable with tapper MK4 - tailstock tapper MK 3 equipment: - dressing device/extruder - coolant tank incl. pump and supply i.D. *

Condition: used, Technical details: grinding diameter: 260 mm grinding length: 1000 mm centre height: 130 mm clamping length: 1000 mm feed:: per Hand headstock adjustment: 280 manuell mm total power requirement: ca. 6,0 kW Ppsdou Ng Dtepfx Afgst weight of the machine ca.: 1,5 t dimension machine xH: 2580 x 1750 x 1630 mm Non-circular grinding machine - (crankshaft grinding machine) Used for grinding crankshafts, camshafts, etc. Machine table: - rotatable right/left: 6° each - clamping surface workpiece 1240 x156mm Grinding headstock: - headstock adjustment 150mm to workpiece axis - rotatable right/left 90° in two planes - feed by hand manual 280mm - grinding wheel/grinding wheel = 350x32x127mm internal grinding spindle type Fortuna SJ 60 x 250L Workpiece headstock: - speed 25 - 65 - 155 - 400 rpm - rotatable by hand adjustment, +/- 90°. - center height 130mm Equipment: Tailstock equipped with dressing device, quill quick clamp with center point. Machine is available for demonstration. *

Condition: used, Technical details: workpiece length: 600 mm pivoting angle: 100 Grad tilting and declining: re/li:30° Grad grinding wheel dia. (used wheel): 175x35 mm total power requirement: ca. 1,5 kW weight of the machine ca.: ca. 250 kg dimensions L x W x H: L.0;85xB:0;7xB:1;6 m Carbid Metal Tool Grinding Machine (chisel grinding machine) version double grinding disc machine Ppedsu Ng Hbepfx Afgst grinding disc = diamond grinding disc with 175x35mm drill cutting edge via tilting lever *

Condition: used, Year of construction: 1987, Technical details: grinding diameter max.: 40 mm workpiece length: 700 mm table adjustment: 0-50 mm table adjustment: abrichten=25 mm cross table: quer/transversal=80 mm number of spindle speeds: 3000 U/min total power requirement: 3,3 kW weight of the machine ca.: 0,8 t space requirements of the machine approx.: T:1,5xB:1,5xH:1,5 m Application area for types of grinding such as: - 3 facet cut; cross cut, 3 edged drill countersinks; spiral drill right spin - grinding area for drills Ø 5 - 40 mm , right spin (5-40mm possible, but chuck to clamp 3-15mm only available and installed on machine!) - max. grindable drill length approx. 700mm with a tip angle of 140 degrees - cutting speed of grinding wheel 25m / second - central lubrification - central coolant device The machine is including accessories see pictures! * Psdpju Ng Hnofx Afgept

Year of construction: 1984, condition: used, Technical details: material Ø max: 120 mm suitable for: Laborarbeiten feed:: Stufe 1: 0,05 Doppelhub mm feed:: Stufe 2: 0,1 Doppelhub mm air pressure - required: 5 - 6 bar Number of working hours: 2649 h connected load: 5 kVA machine length: 1200 mm machine width: 800 mm machine height: 1900 mm machine weight: ca. 850 kg Laboratory Test Grinding Machine Ppjdpfx Aou Ng Sdefgst - precision grinding machine for laboratory work (e.g., steel and ice samples for spectral analysis) - automatic grinding machine with electronic control (in electric cabinet) - automatic feeding of the grinding spindle - workpiece holder = electro-magnetic - 380V; 50Hz; 3 phases - pot grinding wheel Ø 200x 100mm and drill hole Ø 51mm - coolant device available *

Condition: excellent (used), Year of construction: 2001, XYZ 1224 Surface Grinding Machine Electro Magentic Chuck 304 x 609mm Max. Longitudinal Grinding Length 609mm Max. Cross Grinding Length 304mm Max. Distance from Table Surface to Spindle Centre 508mm Max. Longitudinal Hydraulic Travel 660mm Longitudinal Travel Variable 5 – 25m/min Cross Travel Automatic Increment 0.1-10mm Cross Travel Automatic Travel 304mm Cross Feed Handwheel Per Revolution 5mm Cross Feed Handwheel Per Graduation 0.02mm Down Feed Handwheel Per Revolution 2mm Down Feed Handwheel Per Graduation 0.01mm Spindle Motor Speed 3000rpm 50Hz Spindle Motor Power 5hp Hydraulic Motor Power 1Hp Standard Wheel Dia. 355mm Standard Wheel Width 38mm Stand Wheel Bore 127m Machine Weight 1700kgs Foot Print (LW) 3550 x 2550mm Supplied with: Pedpfey R N Aisx Afgopt 2 Grinding Wheels Balancing Unit Coolant & Dust extraction Toolbox Hydraulic Tanks Diamond Wheel Dresser 415V Electrics Machine Pads & Levelling Bolts Low Volt Work Lamp For Sale with Jet Machinery Ltd Jet Machinery Stock No: #79197 Machine Serial Number: 134046 Cost: £11,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 1971, grinding length 700 mm Pjdpfx Afjy T Sbyegopt grinding width 500 mm Magnetic table 700 x 500 mm In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 1990, grinding length 600 mm Psdpfx Aey Tpqrjfgept grinding width 375 mm workpiece height 350-375 mm

Condition: used, turning speed range - grinding spindle 4500 U/min max diameter of the vice bore 17,5 mm Psdpswlvrgofx Afgjpt max. radius to grind max. 10 mm max. lateral adjust. of milling cutter 10 max. longitudinal adjust. of milling cutter 40 max. angle for relief grinding 45 Grad weight of the machine ca. 125 kg Operating instructions available including collet set, grinding wheel flange wrench and the following special accessories: - Aluminium oxide grinding wheel - 3 diamond grinding wheels, different versions - 1 additional grinding wheel holder with diamond grinding wheel - Dressing diamond - Grinding dust cover

Condition: used, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 05/2015, next inspection (TÜV): 12/2026, total length: 25,500 mm, total width: 40,000 mm, Year of construction: 2015, Equipment: ABS, * Advertisement/Vehicle No.: MTE17A * Office: * WhatsApp: * Mobile: * E-mail: * Website: Rental of various trucks + semi-trailer trucks + trailers for short-term or long-term rental, 7.5t from €699.00 and 18t from €1,000.00 per month, available on short notice! Please contact us. 1x Knapen sliding floor K 100, SAF axle + lift axle, tires 385/65 R 22.5 front/rear + lift axle, TÜV (technical inspection) valid until 12-26, main inspection valid until 06-26, main inspection can be renewed for an extra charge! ???? Special offer???? Acquire a complete truck and semi-trailer combination with a MAN TGX 18.4 "special price on request" > contact us directly via WhatsApp! Net price - trade-in possible - Rental/financing/leasing brokerage - Subject to changes, prior sale, typographical errors and mistakes! We only deal with well-maintained German vehicles. Our services: all customs and export documents, Euro 1 * Short-term license plates / 5 days * Customs license plates / 30 days * Vehicle delivery Pedpfxoy T Dq He Afgopt * Vehicle pickup * Main inspection and safety check Our contact details and opening hours: Office: * WhatsApp: * Mobile: * E-mail: * Website: * Monday - Friday: 09:00 - 18:00 * Saturday: by appointment

Condition: good (used), functionality: fully functional, SINUS – Magnet by JUNG model HF 50 RD Width x Depth: 450 x 175 mm Ppodpfsy Ugfvjx Afgst Pitch: 9 mm

Condition: used, functionality: fully functional, grinding length: 1,000 mm, grinding width: 300 mm, Surface grinder BPH 300/1000. Ppodpfx Afjy Uz D Hsgjt

Condition: used, axle configuration: 3 axles, first registration: 01/2018, loading space length: 13,380 mm, loading space width: 2,480 mm, loading space height: 2,760 mm, suspension: air, tire size: 385/65R22,5, wheelbase: 1,300 mm, Year of construction: 2017, Tyre size: 385/65R22,5 Suspension: air suspension Drive: Wheel Empty weight: 7.200 kg Pedpfx Ajucy Agjfgspt Carrying capacity: 34.800 kg GVW: 42.000 kg

Condition: used, Year of construction: 2015, WEINIG - Rondamat 1000 CNC High-precision knife grinding machine - Automatic data import of CNC programs from the Moulder Master - Fully automatic sharpening and production of profile knives from a solid blank - Fully automatic re-sharpening of straight planer knives and profile knives in the cutterhead Grinding of planer knives in the cutterhead with standard knife projection is possible. Used machine Rondamat 1000 Year of manufacture: 2015 Grinding unit: Robust spindle carrier with precise guides for concentricity accuracy under 0.005 mm Motorized radial adjustment for various grinding wheel diameters Back relief angle fully automatically adjustable Lateral relief angle fully automatically adjustable Grinding spindle with HSK interface for fast, repeatable grinding wheel changes and high concentricity accuracy. In combination with the grinding wheel magazine, the wheel change can be carried out automatically. HSK 50 F Grinding wheel diameter min./max. 150/200 mm Grinding wheel width (Borazon, diamond) 2-3-4-10 mm Grinding wheel bore 60 mm Grinding spindle drive 1.5 kW Grinding spindle speed, frequency-controlled 1500-3000 rpm Relief angle grinding: - radial, on knife back 10°-30° - lateral depending on the profile contour 0-20° Accessories: 3 grinding wheel holders for grinding wheel diameter 200 mm LED light for the machine interior Extras: Automatic grinding wheel measurement via optical measuring system for positioning the grinding wheel on the grinding support Measurable diameter min. - max. 145-200 mm Automatic tool changer for changing grinding wheels between profiling and finish grinding - 3 magazine slots Grinding wheel, Borazon, for profile knives in HSS and Stellite, wheel diameter 200 mm, B 151 - radius 2 mm Grinding wheel, Borazon, for profile knives in HSS and Stellite, wheel diameter 200 mm, No. 930062010, B 46 - radius 1 mm, finish grinding Grinding wheel, Borazon, for straight grinding in HSS and Stellite, wheel diameter 150 mm, No. 920072015, B 126 - width 10 mm, rough grinding 3 additional grinding wheel holders - HSK spindle for grinding wheel diameter 200 mm Coolant system: Top cooling via plastic articulated hose and from below via the knife support directly at the grinding point prevents overheating of knives even with high stock removal Dosing of coolant flow via a central distributor with stainless steel ball valves Automatic coolant cleaning through a conveyor filter system Soiled filter paper is automatically removed Coolant tank approx. 70 l Coolant additive 5 l Coolant pump motor 210 watts Ppedpfxoyzaz Rs Afget Tool holder: System "PowerLock" 360 For grinding PowerLock tools and large-bore tools - Max. tool weight 80 kg - Tool holder with manual HSK quick-clamping system - Spindle can be switched for right and left tools - Max. tool width 360 mm - Max. tool cutting circle 300 mm - Min. tool cutting circle 90 mm - incl. PowerLock adapter for mounting conventional tools, shank diameter 40 mm Additional HSK clamping unit Additional part fixture Automatic processing of two tools in one operation.

Condition: used, Year of construction: 1974, mechanical ja Pjdpfxjy Ty Rpe Afgspt centre distance 2000 mm weight of the machine ca. 7,9 t

Condition: used, Year of construction: 1974, mechanical ja centre distance 2000 mm weight of the machine ca. 7,9 t Pjdpsy Ty Riofx Afgspt

Condition: used, Year of construction: 1970, mechanical ja centre distance 2000 mm Ppodpfxjy Ty N Ss Afgot weight of the machine ca. 7,9 t

Condition: good (used), Year of construction: 2007, functionality: fully functional, Technical details grinding length 600 mm grinding width 400 mm workpiece height 375 mm Additional information CNC Precision Surface and Profile Grinding Machine Grinding area: 600 x 400 x 375 mm Grinding spindle motor: 3.7 kW Table drive: hydraulic Cross-axis drive: electromechanical Grinding wheel: 300 x 50 x 76.2 mm Peripheral speed: 10 - 32 m/s Electromagnetic plate: 600 x 400 mm with holding force control and automatic magnetic pole reversal for demagnetizing Features: Partially enclosed, open-topped loading compartment with a sliding door Cleaning kit for cleaning the work area with hand-held impulse nozzle Holder for prism arm with single-point diamond, MK 0 Grinding spindle speed control with V-constant controller Universal paper filter unit UPF 100, tank capacity approx. 280 liters Ppedpfx Ajy Tt Hqsfgjt Coolant pump: 20 liters/minute at 1.5 bar With mud box Machine light Grinding wheel flanges

Condition: like new (used), 200 m² Nedcon Mezzanine Platform approx. 29.5 m x 6.7 m 🧰 Product Features • Column grid: 6.3 m x 5.9 cm • Dimensions: approx. 29.5 m x 6.7 m • Condition: Used, excellent condition, like new, see photos • Height: Top edge of platform 370 cm • Load capacity: 500 kg/m² • Flooring: 38 mm high-density chipboard, white underside, coated top surface Offer includes: 68 Sigma profiles 12 uprights 63 pieces of 38 mm high-density chipboard, coated on both sides, 2.4 m x 1.45 m 4 cross braces Assembly material (screws, ...) Ppsdpfx Afexgq Snsgst Railings, stairs, transfer points, transfer locks, ... can be custom-made for an additional charge. 💰 Price € 19,900 net excl. VAT • Quantity discount: on request • Shipping costs: Europe-wide on request • Delivery time: Available immediately • Viewing and collection: possible at any time by appointment Constant stock of more than 5,000 linear meters of pallet racking from various manufacturers (Technical data, specifications and prices subject to change and prior sale! Please refer to our GTC. All prices excl. VAT ex works.)

Condition: used, Year of construction: 1999, functionality: limited functionality, CNC Cylindrical Grinding Machine for Sale – STUDER S40 (1999) We offer for sale a STUDER S40 cylindrical grinding machine, year of manufacture 1999. The machine is in working condition. It is equipped with one grinding spindle and a turret wheelhead suitable for both external and internal grinding operations, making it a versatile solution for precision machining. Control system: FANUC 16 Key Features: Ppsdpfxoy Elz De Afgot External and internal grinding capability Turret wheelhead Reliable FANUC 16 control system Solid and proven STUDER build quality Operator manual. Delivery Terms: EXW (Ex Works) The machine is available for inspection upon request. For more information, photos, or pricing, please get in touch.