Used Extrusion Plant for sale (3,898)

Condition: used, used dividing system used dividing system consisting of: infeed system Manufacturer: Systraplan Year of manufacture: 1989 Technical data - Siemens S5 control system - Portal infeed system with suction crossbeam - 1 stacking station - 2 stacking stations for collecting protective sheets - Buffer roller conveyor before the infeed system - 1 additional buffer station Dividing saw Manufacturer: Anthon Type: LNB-LNB150 63/33 22 Year of manufacture: 1994 Technical data - Siemens S5 control system - Package height: max. 150 mm - Saw carriage with scoring saw and main saw Paternoster with 2 levels Type: MRB-HUBKORB-EHK-3 Technical data - For collecting identical packs of strips for optimal utilization of the cross-cut saw Destacking Liftomat Manufacturer: Holzma Type: HAU A 25/8, HAU B 25/8, HAU A 25/12, HAU B 25/12 Year of manufacture: 2004 Technical data - 4 storage spaces with roller conveyor lifting station (Liftomat) - Pit required - Buffer roller conveyor after destacking Waste disposal system consisting of a cut-off machine and a shredder Cut-off machine Manufacturer: Holzma Type: Cut-off machine Year of manufacture: 1996 Shredder Manufacturer: Masur Type: LZ 800 Year of manufacture: 2003 Nwjdpfx Aozuzigoi Ton Technical data - Cut-off machine for longitudinal sections - Conveyor belts and consolidation of longitudinal and cross-cut sections - Horizontal shredder Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: used, functionality: fully functional, Year of construction: 2009, operating hours: 6,000 h, machine/vehicle number: 66642, Coarse material screening plant 6 m³ feed hopper with steel plate belt feeder CAT C4.4 (3054) with 75 kW Double-deck screen box: 3,660 x 1,370 mm Feed capacity: up to 300 t/h Transport weight: approx. 23,000 kg including various spare screen decks Nwsdeznl Hiepfx Ai Ten

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) Njdpfx Aezg Dx Uoi Tswn - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Year of construction: 2023, operating hours: 500 h, condition: like new (used), number of feeding trays: 2, Scope of supply of the system The offer includes: 1. Mixer • Concrete mixer with a capacity of 9 m³. • Mixer screw inside the mixer has been renewed and reinforced. • The mixer is driven by a powerful electric motor. • The mixer is mounted on four load cells (each with a load capacity of 20 t) for precise weighing of the materials to be mixed. 2. Trough screw conveyor 1 • Conveying system for feeding the mixer. 3. Trough screw conveyor 2 • Conveying system for discharging the finished mixed material. 4. Liquid feed • Dosing of liquid components via a pumping system from Flux. 5. Electronic control • Electronic control with a mobile operating unit for weighing and dosing based on the weight increase of the material in the mixer. Mode of operation • The mixer is installed on load cells. The current material weight is displayed on the display at all times. • For example, if a total mixture of 4,500 kg is to be produced, this can be dosed precisely according to a predefined mixing ratio, e.g. 80% main material (3,600 kg), 10% additive (450 kg), 7% additive (315 kg) and 3% additive (135 kg). • The smaller additives are pre-weighed and fed into trough screw conveyor 1 via the additive hopper using a travelling carriage from big bags. • Subsequently, the main material is conveyed into the mixer via trough screw conveyor 1 until the desired total weight of 4,500 kg is reached. • After that, the feed is stopped via the trough screw conveyor. • The mixing process then takes place according to the requirements. In our application, the mixing time was approximately 20 minutes. • After the mixing process is complete, the material is discharged via trough screw conveyor 2. To do this, the direction of rotation of the drive motor is switched at the control panel and the discharge screw conveyor is switched on. • The finished mixture can then be filled directly into containers or loaded into transport vehicles (in our case, a push-off trailer or manure spreader). Mixing process based on weight percentages 1. The main material is fed into the trough screw conveyor via the large stainless steel hopper, which then conveys the material into the mixer. In our case, this consisted of solid components from biogas waste. 2. Additional components can be added directly from big bags onto the main material using a second stainless steel hopper and a traverse. This ensures pre-mixing during the conveying process. In our application, biochar and bentonite were added. Njdjzmyviepfx Ai Tjwn 3. Liquid components are sprayed directly into the mixer. In our case, we used EMa (activated effective microorganisms) for this purpose. Optionally, the push-off trailer/manure spreader can be purchased.

Condition: used, Year of construction: 2019, operating hours: 5,532 h, Equipment: ABS, all wheel drive, soot filter, Finished SD2500WS PLUS T4F* weather protection canopy * Air conditioning * Seat heating * Auxiliary heater * Leveling system/cross-slope control * Automatic centralized lubrication system for paver and/or screed * Infinitely variable hydrostatic drive * Front axle is a tandem swing axle * Diesel engine Cummins QSB 6.7 - EUIV(T4f) * All-wheel drive (2 x rear wheels + 4 x front wheels) * Pave Manager 2.0 Advanced * PLC electrical system (CAN bus), ECO mode, 24 V electrical system * Wheel track stone deflector * Mixing material hopper with individual control * Hydraulic front hopper * Support rollers with shock absorption * Reversible slat conveyor with double bars and individual control of conveyor belt halves * Automatic shutdown via mechanical paddles * Hydraulic screw conveyor with height scale * Two reversible screw halves (380 mm) * Ultrasonic sensors in the screw conveyor * Hydraulic screed locking * Side-mounted operator station with weather protection canopy * Variable control panel with push buttons and 7" multifunction display * Two heated Grammer comfort seats * Four LED headlights (2 x front + 2 x rear) * Dynalink Advanced - Telematics system * Hydraulic system for Pave Manager Adv. * SD2500WS THERMO with LightAssist (Paver) ----Vario screed V 5100 TV PM+* Vario screed with gas heating * Basic width 2.55 m, hydraulically extendable to 5.1 m * Compaction system: tamper and vibration * Bottom plate Hardox 500 * Hydraulic adjustment of roof profiles * Two external controls incl. leveling electronics * Leveling system Mobamatic 2+1 * FRONT WHEEL DRIVE CAN BE ACTIVATED FOR WORK ----Additional equipment and accessories* Screw 380 mm 4.42 m * Connection kit V5100/6000 Njdpfsy T Ukdox Ai Tjwn * Rotating beacon * Fire extinguisher * First aid kit * Smoke extraction system * RESTRICTED SD2500WS THERMO * Hydraulic system for Pave Manager Adv. * LightAssist (Paver) * Lighting for screw conveyor * LED headlights screed left + right * 12V socket * TEMPERATURE MEASUREMENT SCREW CONVEYOR * Spray system 25L with hose * High-performance front-wheel drive * Tool set * SetAssist (Transport position) * TRUCKASSIST ADVANCED * Thermomaterial hopper * Folding material guide * Weather protection house * Hydraulic oil drain hose * STVZO - Lift axle * Infrared temperature measurement preparation * Operating manual + parts list (USB) * Operating manual * Parts list * Set of drawings A3 * Leveling system Mobamatic 2+1 * Vario screed V 5100 TV PM+ * Side guards OBT approved (G) PM * Spirit level screed * Holder for cross-slope Moba * Holder for height sensor MobaGrade 1x * Screed width measurement * LightAssist (Screed) * DYNAPLUS12 ----Vehicle number 12111 Errors and prior sale excepted.

Condition: used, Plant for the conditioned milling of malt into grist and for the subsequent storage of the grist. In a conditioning screw conveyor, the malt is moistened with water at 60°C before being ground into grist in the 6-roll mill (Künzel, 1966). The conditioning water is pre-treated in a water treatment system (Täuber, 2019). The grist is collected in a funnel-shaped grist hopper mounted on legs and fed into the grist transport system. Additional title: 6-roll mill for conditioned dry grinding; built between 1966 and 2019 Nodpfx Aoziy U Dji Tewn Capacity: 1200 kg/h Features: 6-roll mill; conditioning screw; water treatment

Condition: used, Complete beer clarification system, comprising the following main components: - Diatomaceous earth cartridge filter (Filtrox, 1979) with a capacity of 27.1 hl and a filter area of 26.62 m². Refurbishment work was carried out by Steinecker in 2002. - Cartridge membrane filter (H&K, 2011) with 24 filter cartridges and a filtration capacity of 200 hl/h - Buffer tank for unfiltered wine (Gross, 1979) with a capacity of 61.5 hl - Buffer tank for filtered wine (Gross, 1979) with a capacity of 10 hl - PVPP dosing vessel (1981) - Diatomaceous earth dosing vessel (1979) Additional title: Complete filtration system with buffer tanks and dosing for filter aids Nwsdozizq Tjpfx Ai Ten Filtration capacity: 18000 l/h Material: Contact surfaces from stainless steel Features: Cartridge filter; cartridge membrane filter; 2 x buffer tanks; 2 x dosing vessels; various pipes, valves and sensors

Condition: used, CIP system comprising a total of 7 tanks, of which: - 1 tank with a capacity of 60 hl, used as a buffer water tank - 5 tanks, each with a capacity of 30 hl (built in 1992), for acid, buffer water, Desi and 2 x lye - 1 tank with a capacity of 20 hl (built in 1992) for fresh water Other system components: - 2 centrifugal pumps - Heat exchanger - Conductivity measurement - Various pipework and valves Additional title: 7-tank CIP system with pumps and heat exchanger Nwjdpfx Aiezi Anao Ton Volume stacked water tank: 6000 l Volume 5 x tanks for cleaning solutions: 3000 l Volume fresh water tank: 2000 l Material: stainless steel Position: vertical vessels each on 3 feet Features: 7 x CIP tanks (comprising 1 x 60 hl, 5 x 30 hl and 1 x 20 hl); 2 x centrifugal pumps; heat exchanger; conductivity measurement; various pipework and valves

Condition: new, Year of construction: 2015, Storage location number: 100636087 Nwedpfx Aozkz Rpei Ton Transport dimensions (L x W x H): 0 x 0 x 0

Condition: excellent (used), functionality: fully functional, ELMAG SER-FC-CS45 painting line for joinery 1. Automatic transport system with: – Trolleys: 40 units – Max. permissible total weight: 6000 kg – Trolley length: 3000 mm – Feeding system: automatic – Trolley rotation: automatic 2. Painting booth: – Dimensions: 4080 x 2000 x 4000 – Power: 4 kW – Flow rate: 14,000 m3/h 3. Flow coating system: – Length: 4000 mm – Valve height: 4500 mm – Usable working height: 2500 mm – Pump flow rate: 500 l/min – Valve construction: stainless steel – Capacity of the paint valve: 200 l 4. Drying chamber: – Dimensions: 13,000 x 2900 x 4100 5. Air purification system (inlet + recirculation filters): – Air flow: 7000 m3/h – Painting line compressor Nwodpfx Ajzk Epcji Tsn – Air purification system (inlet and recirculation filters) Air flow: 15,000 m3/h – Thermal power: 110,000 kcal/h

Condition: new, Year of construction: 2026, operating hours: 10 h, functionality: fully functional, total width: 3,000 mm, total length: 3,000 mm, total height: 2,800 mm, IFP - KP 100 WTR Metal Degreasing and Cleaning System Key Specifications: - New system: Year of manufacture 2026 - Usable media: Water with cleaning additive - Basket dimensions (LWH): 670 / 480 / 300 [mm] - Throughput: approx. 4 batches/hour - Filling volume: 1130 liters - Connection power: 33 kW - Compressed air: 6 bar - System weight: 2600 kg System Equipment - Fully enclosed system design - Rotating and pivoting mechanism - Front loading - 3 x Flood pre-treatment tanks (heated) Njdpfx Aozf Hp Toi Tswn - 1 x Process filter cleaning tank - 1 x Process filter rinsing tank - 1 x Process filter rinsing tank 2 - Surface rinsing - Glass door - Electropolished work chamber - Oil separator - Hot air drying - Vacuum drying - Sliding table with two positions - Dosing system for cleaning agents - Ultrasonic 1 kW / 25 kHz (power adjustable) - Spraying via four nozzles - 12" touch panel - Automatic water replenishment

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, For sale: a used CHP unit with few operating hours, hardly used. Nwsdpfxszcwhvo Ai Ten Natural gas. Details: see nameplates.

Condition: new, Year of construction: 2023, functionality: fully functional, feed rate X-axis: 6 m/min, working width: 1,300 mm, total length: 4,885 mm, total height: 2,400 mm, total width: 3,780 mm, type of input current: three-phase, working height: 900 mm, input voltage: 380 V, input frequency: 50 Hz, energy consumption: 17 kWh, warranty duration: 12 months, DIMENSIONS OF PAINTED COMPONENTS The line will ensure good qualitative results under all operating conditions, provided that components with incorrect parameters are eliminated at the beginning, such as: • Bent, warped components; • Components with defects that would render them unsuitable for use even after painting. • Maximum length 2500 mm • Minimum length 350 mm • Maximum width 1300 mm • Minimum width 50 mm • Maximum thickness 60 mm • Minimum thickness 5 mm • Maximum deflection 10 mm • Average temperature 15-35 °C • Minimum temperature -5 °C • Relative humidity % • Operating speed 2 [2-3] m/min • Operating height 900 mm MATERIAL • Wood and wood-based materials END PRODUCT • Furniture • Outdoor furniture SHAPE • Shaped components TYPES OF PAINTS • Solvent-based paints • Water-based paints FINISH • Transparent • Matte (< 25) • Pigmented • Semi-matte (30-40) MITO B2: MITO B2 SPRAYING AUTOMAT Spraying automat with 2 arms, dry air filtration system, and conveyor belt. Machine designed for continuous coating of various types of profiled panels. Spraying in continuous mode on any type of panel. No paint mist on the underside of the panels thanks to the 1650 mm conveyor belt. Robust machine construction. Excellent access to the interior through glazed areas, access doors, and retractable parts. Components are transported by a CFB belt transport system with a sealed edge, driven by a motor with a frequency inverter. The outer side of the belt is located outside the cabin to allow vapor containment. The axis is driven by a brushless motor and a toothed belt, ball bearings. Guarantees the best feed, acceleration and deceleration parameters, allowing for maximum coating quality. New and patented PLENUM (patented air diffusion system). Thanks to flow studies, better paint management (savings), better machine cleaning, and better coating quality are achieved. Unique management of component transport with precise speed control prevents soiling of the lower part of the components during acceleration/deceleration. Control electrical cabinet, located at the machine entrance on the service side, with electrical installation and connection channel to the machine. Wide, robust and efficient double-zone with a filter section. Flow regulated by a frequency inverter. Tanks with supports for Columbus filters Fire-resistant ATEX cat. 2G exhaust fan HCD type belt cleaning and paint recovery system. Perfect belt cleaning, maximum paint recovery ensured by the patented system from Cefla and the CFB belt with sealed edges. Cleaning system motor with inverter 1.50 kW. Easy access system, components removable from the front, ergonomic layout. Color and product change in seconds (including a spare set). 2 opposite arms with fixed holders for 4 guns, manual height adjustment. Spraying equipment (pumps, guns) and adaptations are not included in the offer. Nwedpezq Axzjfx Ai Ton 2 paint feed circuits with element recirculation and paint filters. Stainless steel fittings.

Condition: used, Year of construction: 2010, “Cleaning in Place” (CIP) system, consisting of the following components: - 400-liter stainless steel tank serving as a hydrostatic circulation tank - 7.5-kW feed pump (Packo) for pumping 25 m³/h against 4.1 bar - 4.0 kW return pump (Packo) for pumping 25 m³/h against 2.0 bar - Shell-and-tube heat exchanger (Weinbrenner) for heating a flow rate of 25 m³/h from 55 °C to 75 °C with 790 kW - 4-channel chemical dosing system (ProMinent) for lye, acid, disinfectant, and additive - Temperature measurement - Conductivity measurement (E+H) - Inductive flow meter (E+H) - Control cabinet with touchscreen display - Various piping and valves Additional title: Cleaning system for cleaning pressurised tank cellars Volume circulation tank: 400 l Length: 2,5 m Width: 3,0 m Njdpfeztwu Asx Ai Town Height: 2,9 m Operation / Control: Simatic S7 Material: contact surfaces from stainless steel Position: on stainless steel frame with feet Features: Circulation tank; 2 centrifugal pumps; shell-and-tube heat exchanger; 4-channel chemical dosing system; control cabinet with touch panel; flow measurement; conductivity measurement; temperature measurement; various pipes and valves

Year of construction: 2024, condition: excellent (used), functionality: fully functional, Complete extrusion line / extrusion system including packaging technology For sale is a complete, fully operational extrusion system for food products. The system consists of several coordinated components and covers the production process from mixing the raw materials through extrusion, drying, and cooling to packaging. The mixer is designed for batches of up to approximately 300 kg. The installed single-screw extruder achieves – depending on the raw materials used, the recipe, and the process parameters – a production output of approximately 70–90 kg per hour. Scope of supply / components of the extrusion line: 1. Mixer – designed for up to approximately 300 kg 2. Single-screw extruder – output approximately 70–90 kg/h 3. Conveyor screw / conveyor system 4. 3 × product or intermediate hoppers 5. Drying oven / belt dryer – approximately 5 meters long 6. Exhaust and ventilation system 7. Cooling system / cooling drum 8. Doypack packaging machine 9. Flowpack packaging machine The system enables a largely continuous production process from raw material preparation to the finished, packaged end product. Technical design All components were manufactured in Ukraine and are CE-certified. All parts and surfaces that come into direct contact with the product during the production process are made of stainless steel. The entire production line has a length of approximately 28 meters in the configuration shown. Individual machines and components can be arranged differently if necessary, depending on the available production space. Possible applications The extrusion system is suitable, for example, for the production of: Puffed and snack products rice or grain-based products cereals and extruded products functional snacks other extrudable food products The actual production output and the final product depend on the raw materials, recipe, die, and the respective extrusion and drying parameters. Nwodpfx Aeztkxbei Tjn Inspection of the system is possible after prior appointment. We will be happy to provide further technical information, images, and details on the individual machines upon request. It is also possible to purchase the individual machines separately. The price list is as follows: 1. Mixer – designed for up to approximately 300 kg - €5,000.00 2. Single-screw extruder – output approximately 70–90 kg/h - €15,000 3. Conveyor screw / conveyor system - €2,500.00 4. 3 × product or intermediate hoppers - €1,000.00 per hopper 5. Drying oven / belt dryer – approximately 5 meters long - €20,000 6. Exhaust and ventilation system - €500.00 7. Cooling system / cooling drum - €2,000 8. Doypack packaging machine - €18,000 9. Flowpack packaging machine - €15,000

Condition: used, Year of construction: 2014, operating hours: 1,322 h, functionality: fully functional, machine/vehicle number: G3791, power: 550 kW (747.79 HP), total height: 3,700 mm, total length: 12,000 mm, total width: 2,950 mm, overall weight: 5,810 kg, Equipment: documentation/manual, 2G avus 500 plus – Gas-fired combined heat and power (CHP) plant – 550 kW For sale is a 2G gas-fired combined heat and power (CHP) plant, type avus 500 plus, with an electrical output of 550 kW. Njdpfezxqd Ijx Ai Tewn The plant was built in 2014 and is in used, fully functional condition. On April 19, 2023, a completely new gas engine was installed, and on December 9, 2024, an engine preservation procedure was carried out upon decommissioning of the plant (installation reports are available). The new engine has 1,322 operating hours. Technical data Manufacturer: 2G Energietechnik GmbH Type: avus 500 plus Year of construction: 2014 Serial number: CO0414C-ELLB-550054 Electrical output: 550 kW Power supply: 400 V / 50 Hz Rated current: 794 A Total operating time: 69,481 h Operating hours since last maintenance: 1,322 h Weight: approx. 5,810 kg Dimensions (L × W × H): approx. 12,000 × 2,950 × 3,700 mm Condition and documentation The CHP plant is used and fully functional. Documentation and manuals are available. The chimney shown in the picture can be purchased if required. Location: Neuenkirchen-Vörden, Germany An inspection of the plant is possible after prior appointment. If you are interested or have technical questions, please send us an inquiry. We will provide further information and documents upon request.

Condition: excellent (used), functionality: fully functional, fuel type: diesel, overall weight: 38,800 kg, Year of construction: 2023, operating hours: 1,707 h, Conveyor belts: hydraulically foldable Engine type / engine power: C4.4 Tier 4 Final / 102 kW Transport weight: approx. 38,800 kg Engine manufacturer: Caterpillar Transport dimensions: 18,500 x 3,200 x 3,400 mm (L x W x H) Volume of feed hopper: 10 m³ Njdszxq N Rspfx Ai Tswn Grizzly screen: hydraulically foldable with remote control Screen area, lower deck: 5,490 x 1,524 mm Screen area, upper and middle decks: 6,100 x 1,524 mm Screening plant type: classifying screen with three screen decks Throughput: up to 600 t/h (application-dependent)

Condition: excellent (used), Year of construction: 2008, operating hours: 84,000 h, functionality: fully functional, power: 526 kW (715.16 HP), type of cooling: air, input frequency: 50 Hz, Jenbacher J312GS hours: 84,000 hours overhaul at 60,000 hours. Year: 2008 Nwedjzwpnpjpfx Ai Ton Rated power: 526KW Frequency: 50HZ Very well looked after unit was installed in a hospital and serviced and maintained regularly.

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 12389, Equipment: documentation/manual, We are offering this used FAT T1 regeneration system, manufactured in 2013. 1. Brief Description For sale is a thermal sand regeneration system from the German manufacturer FAT Förder- und Anlagentechnik GmbH. The system is currently in operation and is being sold solely due to a capacity expansion at the site. The sale is not due to any technical or economic deficiencies. The system has only been operated in a production hall and is in very good technical and visual condition. 2. Technical Data Manufacturer: FAT Förder- und Anlagentechnik GmbH Type: T1 Factory Number: 12389 Year of Manufacture: 2013 Fuel: Natural Gas Thermal Output: 350 kW Regeneration Temperature: approx. 850 °C Throughput: approx. 850 to 1,300 kg/h Sand System: PEP-SET / Cold Resin Systems Volatilization Loss: up to approx. 0.1% Installation: Production Hall Availability: Dismantling from mid-September 2026 3. Scope of Supply The scope of supply includes:  Frequency-controlled sand dosing via screw conveyor  Sieve  Magnetic Separator  Thermal Regeneration Furnace  Cooler Sand/Air Cooler (Recuperation) Air/Water Cooler Chilling Unit  Control Cabinet  PLC Control  Electrical Equipment Nwedjzhvagepfx Ai Ton  Pneumatic Components  Original FAT Documentation Not included in the scope of supply:  Dust extraction system, as it is connected to a central extraction system  Sand conveyor after the cooler The system is currently connected to the existing central dust extraction system of the plant. 4. Performance Features The system was designed for the regeneration of chemically bonded molding materials and achieves excellent regeneration results. Special Features:  Volatilization loss up to approx. 0.1%  High regenerant quality  Economical natural gas operation  Robust FAT construction  Proven industrial continuous operation  Complete technical documentation available 5. Documentation Scope The following documents are complete:  Operating Instructions  Maintenance Instructions  Circuit Diagrams  Pneumatic Diagrams  Installation Plans  Layout Drawings  Water Installation Plans  FAT Construction Drawings  Technical Documentation (2 folders) + Switchgear Planning The completeness of the documentation has been verified. 6. System Condition The system is in continuous production operation until dismantling. Advantages for the buyer:  Functional demonstration possible during operation  Inspection possible by appointment  Documented system condition  Weather-protected hall installation  Weather-independent dismantling and loading 7. Dismantling and Availability Dismantling is expected to be possible from mid-September 2026. The system is located inside a production hall and is very easily accessible for dismantling and loading operations. 8. Reason for Sale The system is being sold solely due to a capacity expansion at the production site. The existing system meets all technical requirements and is in functional condition. 9. Inspection Inspections and functional demonstrations are possible by prior appointment. Qualified interested parties will be provided with further technical documents, drawings and photo documentation upon request. If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 2007, Koenig Mini Rex 4000 bun roll machine 2-pocket drum and pistons SKG54-AKG70 Nwedpfsvpvv Iox Ai Ten weight range 25-140 grams cap. pcs/h 4000 year of build 2007

Year of construction: 2019, condition: new, Preparation of a written offer / cost estimate for a powder coating system from the company Romer. Nwjdpfx Aisc Sd D Se Ten

Condition: good (used), overall weight: 41,000 kg, Year of construction: 2004, operating hours: 5,500 h, Single-toggle jaw crusher Nedpetpaktofx Ai Tswn Inlet: 1,000 x 650 mm Finished product: approx. 0/70-0/200 mm Feed hopper, vibrating feeder Electric drive with 220 kVA generator Side and main discharge conveyor Overhead magnet

Condition: refurbished (used), Chamber filter press 1200x1200 Application: gravel works / tunnel construction Number of filter plates: available in different designs and number of plates Nedpfx Aierq I Iwj Tswn Filter pressure: 15 bar Filter cloths: optional in coordination with the medium Piston diaphragm pump: optional Available: pre-configured from stock or according to customer requirements Condition: refurbished - rebuilt also according to customer requirements

Condition: refurbished (used), functionality: fully functional, Extrusion Screen Changers - Continuous Screen Changers Double Piston Filter - - Immediately available, on request also with control, hydraulic unit. When making your request, please let us know your desired capacity and the material so that we can offer you the right filter. Nwedpjh Itl Sefx Ai Ten

Condition: new, Year of construction: 2025, machine/vehicle number: 421159679, Mobile jaw crusher on tracked chassis The VULCANO crusher is the most modern and compact machine in its category, weighing 25 tons and representing the latest generation. The feed hopper, with road-legal loading dimensions and the option to fold down the conveyor belt, enabling transport even on trailers, makes it versatile for transport and just as quick to set up. From arrival at the construction site to the moment the crushing process begins, only the time required for warm-up is needed. Equipped with state-of-the-art control and operating systems, it is simple and user-friendly, and also environmentally friendly. The HCS control system (Hydraulic Crushing System) actively supports the automatic operation of the machine, guaranteeing the highest profitability in terms of maintenance costs and productivity, making it unparalleled. The structural reinforcement between the frame and the crusher gives the machine the highest robustness against stresses. The special design of the supporting structure guarantees excellent access to all machine parts during maintenance operations. The GI CRUSHER VULCANO certainly offers convincing and unparalleled performance both in natural stone applications and in recycling, as well as for rental purposes. Production capacity: approx. 190 tons/hour Patented HCS system Proportional valve with "Load Sensing" for system optimization and a reduction in fuel consumption of approx. 30%. Optional pre-screening Gap size hydraulically adjustable, even during the crushing process Fast locking system with wedges and folding cylinders Discharge height 2750 mm Dust extraction Tank pump Magnet separator Warranty: 1 year or up to a maximum number of operating hours from the start of operation of the plant. Technical data: Jaw crusher 830 x 580 mm Crushing gap from 30 to 160 mm Feed hopper 3.5 m³ - 1800 x 2970 mm Grizzly feeder 770 x 2750 mm Main conveyor belt 800 x 8700 mm Nwjdpfx Aiohd I Sbo Ten 4-cylinder diesel engine with constant speed 82 HP / 60 kW, emission stage V Control panel Tracked chassis 400 x 2920 mm Weight: kg Transport length 10850 mm or 9170 mm with folding discharge belt Transport width: 2520 mm Transport height 3100 mm Further information: Application: Construction, Drive: Crawler