Used Falc Soil Tiller for sale (551)

Condition: new, functionality: fully functional, machine/vehicle number: 0029226067, Year of construction: 2026, load capacity: 1,400 kg, lifting height: 4,620 mm, free lift: 1,518 mm, fuel type: electric, mast type: triplex, construction height: 2,050 mm, fork length: 1,150 mm, empty load weight: 1,040 kg, total length: 1,933 mm, drive type: Elektro, construction width: 790 mm, High-lift pallet truck Chassis number: 0029226067 Gusdpfjyng N Hex Alxeb Load center: 600 mm Fork width: 185 mm Fork thickness: 55 mm Mast type: Triplex Condition: New device Technical condition: New Front tire type: Vulkollan Front tire size: 230 x 70 Front tire condition: New Rear tire type: Polyurethane Rear tire size: 85 x 100 Rear tire condition: New Battery voltage: 24V Battery capacity: 210Ah Battery manufacturer: Midac Aquamatic Battery type: PzS Battery year of manufacture: 2026 Battery condition: New Description: Start via key switch, standard version, top battery removal, mast guard made of wire mesh, 1 hydraulic valve function, proportional lift/lower control on the tiller head.

Condition: new, functionality: fully functional, machine/vehicle number: 0029226065, Year of construction: 2026, load capacity: 1,200 kg, lifting height: 4,340 mm, free lift: 1,418 mm, fuel type: electric, mast type: triplex, construction height: 1,950 mm, fork length: 1,150 mm, empty load weight: 1,005 kg, total length: 1,933 mm, drive type: Elektro, construction width: 790 mm, High-lift pallet truck Chassis number: 0029226065 Load center: 600 mm Fork width: 185 mm Fork thickness: 55 mm Mast type: Triplex Gujdoyng Ipopfx Alxsb Condition: New machine Technical condition: New Front tyre type: Vulkollan Front tyre size: 230 x 70 Front tyre condition: New Rear tyre type: Polyurethane Rear tyre size: 85 x 100 Rear tyre condition: New Battery voltage: 24V Battery capacity: 210Ah Battery manufacturer: Midac Aquamatic Battery type: PzS Battery year of manufacture: 2026 Battery condition: New Description: Start via key switch, standard configuration, lateral battery removal, mast guard made of wire mesh, 1 hydraulic valve function, proportional lift/lower control on tiller head

Condition: ready for operation (used), GASTEC Detector Tubes indicate concentrations directly by way of a calibrated scale printed on the tubes. At GASTEC, we endeavour to achieve highest quality detector tubes for analysing airborne gases/vapours, as well as pollutants in soil and water through our advanced state-of-the-art research and development. Through our efforts we have acquired a solid reputation among our customers in virtually all sectors of industry, commerce and society. Tubes are now available for more than 500 different applications. Guedsy D D Tcopfx Alxob

Condition: new, functionality: fully functional, machine/vehicle number: diverse, Year of construction: 2026, load capacity: 1,500 kg, lifting height: 115 mm, fork length: 1,150 mm, empty load weight: 120 kg, total length: 1,622 mm, drive type: Lithium-Ionen, construction width: 685 mm, Low-lift pallet truck Chassis number: Various Gedjyng Ezspfx Alxeub Load centre distance: 600 mm Fork width: 160 mm Fork thickness: 58 mm Condition: New machine Technical condition: New Front tyres type: Polyurethane Front tyres size: 140 x 55 mm Front tyres condition: New Rear tyres type: Polyurethane Rear tyres size: 80 x 93 mm Rear tyres condition: New Battery voltage: 48V Battery capacity: 10Ah Battery manufacturer: Hyster Battery type: Lithium-ion Battery year: 2026 Battery condition: New Description: Compact and lightweight design, lateral load support rollers, electric drive, electric lifting and lowering, key-operated controls, travel possible with tiller in vertical position for maximum efficiency in confined areas, emergency direction-reverse switch, ergonomic multifunction tiller with LCD display for maximum operating hours, hour meter, and onboard diagnostics.

Condition: good (used), functionality: fully functional, Year of construction: 2010, working width: 3,000 mm, color: red, Hello I have for sale Kverneland EG 85 Vario 6 skid plow on 300 head, the machine in continuous operation, below its parameters: Distance between bodies (cm) 85 Head 300 Type of protection Non - Stop (spring) + additional Casing plowing width (cm) 30 - 50 cm Clearance under the frame (cm) 70 - 75 c Number of bodies 6 I invite you to purchase. Guodpfxsuaziio Alxeb

Condition: used, Year of construction: 2015, WEINIG - Rondamat 1000 CNC High-precision knife grinding machine - Automatic data import of CNC programs from the Moulder Master - Fully automatic sharpening and production of profile knives from a solid blank - Fully automatic re-sharpening of straight planer knives and profile knives in the cutterhead Grinding of planer knives in the cutterhead with standard knife projection is possible. Used machine Rondamat 1000 Gsdpfsyzaz Rsx Alxeub Year of manufacture: 2015 Grinding unit: Robust spindle carrier with precise guides for concentricity accuracy under 0.005 mm Motorized radial adjustment for various grinding wheel diameters Back relief angle fully automatically adjustable Lateral relief angle fully automatically adjustable Grinding spindle with HSK interface for fast, repeatable grinding wheel changes and high concentricity accuracy. In combination with the grinding wheel magazine, the wheel change can be carried out automatically. HSK 50 F Grinding wheel diameter min./max. 150/200 mm Grinding wheel width (Borazon, diamond) 2-3-4-10 mm Grinding wheel bore 60 mm Grinding spindle drive 1.5 kW Grinding spindle speed, frequency-controlled 1500-3000 rpm Relief angle grinding: - radial, on knife back 10°-30° - lateral depending on the profile contour 0-20° Accessories: 3 grinding wheel holders for grinding wheel diameter 200 mm LED light for the machine interior Extras: Automatic grinding wheel measurement via optical measuring system for positioning the grinding wheel on the grinding support Measurable diameter min. - max. 145-200 mm Automatic tool changer for changing grinding wheels between profiling and finish grinding - 3 magazine slots Grinding wheel, Borazon, for profile knives in HSS and Stellite, wheel diameter 200 mm, B 151 - radius 2 mm Grinding wheel, Borazon, for profile knives in HSS and Stellite, wheel diameter 200 mm, No. 930062010, B 46 - radius 1 mm, finish grinding Grinding wheel, Borazon, for straight grinding in HSS and Stellite, wheel diameter 150 mm, No. 920072015, B 126 - width 10 mm, rough grinding 3 additional grinding wheel holders - HSK spindle for grinding wheel diameter 200 mm Coolant system: Top cooling via plastic articulated hose and from below via the knife support directly at the grinding point prevents overheating of knives even with high stock removal Dosing of coolant flow via a central distributor with stainless steel ball valves Automatic coolant cleaning through a conveyor filter system Soiled filter paper is automatically removed Coolant tank approx. 70 l Coolant additive 5 l Coolant pump motor 210 watts Tool holder: System "PowerLock" 360 For grinding PowerLock tools and large-bore tools - Max. tool weight 80 kg - Tool holder with manual HSK quick-clamping system - Spindle can be switched for right and left tools - Max. tool width 360 mm - Max. tool cutting circle 300 mm - Min. tool cutting circle 90 mm - incl. PowerLock adapter for mounting conventional tools, shank diameter 40 mm Additional HSK clamping unit Additional part fixture Automatic processing of two tools in one operation.

Year of construction: 2026, condition: new, -Professional vibrating screen -Sieve material into 2 or 3 fractions -Removable grids for quick replacement and/or cleaning -Under-screen vibrator -Equipped with a professional electro-vibrator, it allows continuous operation. - Perfect for screening mats. granular, pellets, seeds, legumes, flours, sawdust, soil etc. -Precise and fast screening -Very low maintenance costs -Vibrating grid dimensions 500mmx1000mm, grid holes according to your specifications * -Three-phase 380V or single-phase 220V operation on request - Wheels for movement, two fixed and two swivel with brake Gsdpjd Nrgqofx Alxsub -Solid construction -Made in EU

Year of construction: 2026, condition: new, functionality: fully functional, power: 0.7 kW (0.95 HP), overall weight: 557 kg, total length: 1,306 mm, total width: 1,876 mm, total height: 1,993 mm, input voltage: 230 V, Equipment: documentation/manual, emergency stop, type plate available, Applications & Customer Benefits: Godpfx Aswyl Efelxoub The ASCO VS Compact One Deck vibration screen ensures efficient separation of soil, gravel, wood chips, and construction waste for recycling, construction, agriculture, and landscaping. Its flexible design improves productivity and simplifies material handling across diverse operations. Key Features: • Semi-mobile, foldable design for easy transport and setup • Adjustable screen angle for precise material adaptation • Quick-change screen decks supporting multiple mesh options • Dual vibration motors for high screening performance • Modular system for fast expansion and operational flexibility Tech Highlights: L 1,31 m · H 2 m · W 1,88 m · Qmax 18-23 t/h · Power 2 x 0,35 kW · Weight 557 kg · Bucket width 1,6 m

Condition: new, Year of construction: 2026, Hot Air Lance HL-1 is a high-quality and efficient equipment. Hot Air Lance for pavement crack sealing preparation is a self-contained mobile unit for cleaning and drying of cracks, joints, potholes and chips in asphalted and concrete road surfaces, before pouring them with bitumen or bitumen polymeric materials. Powerful hot air flow removes moisture and particles of debris, grass, soil, dust, dirt, small stones, etc. leaving cracks dry, clean and ready to be filled with bitumen materials. Reasons to Buy Hot Air Lance from TICAB Gsdpfjvpqp Aex Alxoub • Low price because of no mediators. • Always in stock. • 1-year warranty. • Full support from the manufacturer. Technical specifications: - Propane gas (consumption 5 kg / h); - Gas working pressure: 0.2-0.3 bar; - Gas bottle capacity - 50 l; - Compressor unit weight - 107 kg; - Output air temperature: not less than 400 ° C; - Hot Air Lance weight - 6 kg - Hot Air Lance length: 1500 mm; - Wheeled stand weight: 4kg; - Compressor capacity - 600 l / min; - Engine power: 7 hp.

Year of construction: 2025, operating hours: 7 h, condition: new, functionality: fully functional, Our semi-mobile electric stone conveyor for sorting rollable materials such as stones. To be placed directly behind a drum screen for the separation of stones from green waste, compost, or soil. Easily powered via a 16-amp electrical connection. The conveyor angle and belt speed are adjustable. Demonstration unit from 2025 with Gedsrhkpzopfx Alxeub

Condition: used, functionality: fully functional, Year of construction: 2020, operating hours: 99 h, load capacity: 2,000 kg, fuel type: electric, drive type: Elektro, Low-lift pallet truck Load centre: 600 mm Condition: Refurbished, without warranty Technical condition: Very good Battery voltage: 24V Battery capacity: 225Ah Battery type: PzS Description: Prices are non-binding, ex stock, plus freight and VAT. No warranty or returns. Inspection by appointment possible. Our general terms and conditions apply. Standard tiller, pedestrian operated, PIN code, steel foot protection, tandem polyurethane fork rollers, Topthane drive wheel, polyurethane support wheel, medium battery compartment. Gjdpfxsyczikj Alxoub

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 2,273 h, load capacity: 2,000 kg, fuel type: electric, fork length: 1,150 mm, drive type: Elektro, Pallet truck (low lift) Load centre: 600 Condition: Refurbished, no warranty Technical condition: Very good Battery voltage: 24V Battery capacity: 225Ah Battery type: PzS Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty or returns. Inspection possible by appointment. Our general terms and conditions apply. Godpeyczidofx Alxjub Platform manually foldable with protective guard, standard tiller, mechanical steering 8.0 km/h, PIN code, single fork rollers, polyurethane drive wheel, single support wheel, compact premium battery compartment

Condition: new, functionality: fully functional, power: 50 kW (67.98 HP), fuel type: diesel, color: orange, Year of construction: 2026, Equipment: all wheel drive, hydraulics, IRUS Crawler – Mowing, Mulching & Forestry Maintenance Model designation: various models Base price: €53,000.00 (smallest machine) Mowing & Mulching • Mowing on slopes and steep terrain (depending on model, up to approx. 60° incline) • Roadsides, embankments, levees • Solar parks, wind farms, utility corridors • Orchards & extensive grassland • Tall growth, shrubbery, blackberries (with flail mower) • Mulching instead of mowing → material remains on the ground and decomposes Forestry & Landscape Maintenance • Maintenance of reforestation areas • Removal of undergrowth in the forest • Keeping paths, aisles, and logging roads clear • Preparing areas for new plantations Municipal & Construction Applications • Railway embankment maintenance • Mowing along highways & federal roads • Operations in hard-to-reach terrain • Use on landfill or recultivation sites With Attachments (very important!) Depending on the configuration, you can use e.g.: • Flail mower • Sickle bar mower • Rotary mower • Snow blower or snow blade • Sweeper • Winch • In some cases also rotary tiller / forestry mulcher This makes the IRUS Crawler usable all year round. ️ Operation & Safety • Radio remote control → work from a safe distance • Very low center of gravity → extremely stable on slopes • Ideal for locations where use of a tractor or manual labor would be too dangerous Cost-effectiveness • Saves labor time & personnel • Replaces manual brush-cutting • Especially interesting for: o Contractors o Municipalities o Landscaping companies o Forestry operations ✅ Rental & demonstrations available! We are happy to offer rental solutions and organize demonstrations (also on challenging terrain), to help you find the right IRUS Crawler including attachments for your application. Contact: Gsdpfx Aljyim Uvexsub Henne Nutzfahrzeuge GmbH Authorized Mercedes-Benz Unimog General Representative JCB Sales and Service Partner Hans-Grade-Straße 2 · 04509 Wiedemar Marlon Schütz – Sales Municipal Special Equipment

Condition: used, functionality: fully functional, Year of construction: 2021, operating hours: 1,449 h, load capacity: 1,200 kg, lifting height: 2,700 mm, free lift: 166 mm, fuel type: electric, mast type: duplex, construction height: 1,840 mm, fork length: 1,150 mm, drive type: Elektro, Pedestrian stacker Load center: 600 Mast type: Duplex Condition: Refurbished without guarantee Technical condition: very good Battery voltage: 24V Battery capacity: 225Ah Battery type: PzS Description: Prices are subject to change, ex stock, plus freight and VAT. No warranty and no returns. Inspection possible by appointment. Our general terms and conditions apply. Pedestrian tiller, standard hydraulics, PIN code, finger guard Plexiglas, single polyurethane fork rollers, drive wheel Friction, support wheel Premium, medium battery compartment. Gujdpfx Aloyczh Tjxob

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,500 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) Godpsmhh Dhefx Alxoub - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,500 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments Gedpfjmhh Dzox Alxsub - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Gsdod Tbbdspfx Alxeub - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: Gujdpfx Aomhhx Ijlxsb - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard Gujdpfjmhhyaox Alxeb - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand Gusdsh Ek Daopfx Alxob - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Gjdpfxemhh Anj Alxsub When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard Gsdpfxsfdkb Us Alxjub - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Gsdpsguk Dkofx Alxeub Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) Guedpfsmidyfox Alxsb - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. Guodsmkixwspfx Alxob The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.