Used Felder Abricht-Dickenhobelmaschine Ad7-41 for sale (3,696)

Condition: as good as new (ex-display), Year of construction: 2025, Jointer-thicknesser with TERSA quick-change system for planer blades. With TERSA quick-change system for blade changes in seconds. TERSA planer blade system enables particularly quiet operation. Helically toothed steel infeed roller for consistent and even material feed. Robust jointer tables made of ribbed cast iron, milled and stress-relieved, making them insensitive and permanently flat. Large, swiveling fence for precise jointing, can be repositioned at 90°/45°, with quick-clamp. Jointer table opens to the rear. Powerful motor. Robust steel/cast iron construction. Long-hole drilling device can be retrofitted. Equipment details: TERSA planer blade shaft. No more adjusting and screwing. Blade changes in seconds. Self-locking. Particularly quiet. Perfect planing result. Blsdpfodqy Uqjx Amzok Jointer Standard equipped with TERSA quick-change system for planer blades. Large-sized jointer tables. The jointer and thicknesser tables made of cast iron guarantee maximum smoothness and vibration-free operation. Thicknesser With the powerful thicknesser feed, workpieces up to 200 mm high can be planed. The helically toothed infeed roller guarantees consistent feed. Changing from jointer to thicknesser is done in seconds with a single action. Drive Sturdy chain drive. Drive sprockets made of steel. Solid cast iron bearing housing. Planing unit Solid anti-recoil devices prevent the workpiece from kicking back. 3-blade TERSA shaft ensures an optimal planing result. Special equipment features Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. Scope of delivery: Large fence, can be repositioned at 90°/45° for precise jointing with quick-clamp. TERSA planer blade shaft. Model: minimax fs 30g TERSA Article No.: 5503036 Technical data ---Technical data, jointer--- Total length of tables: 1200 mm Feed table length: 580 mm Table height: 900 mm Working width: 300 mm Max. chip removal: 3 mm ---Technical data, thicknesser--- Dimensions of thicknesser table: 450 x 300 mm Min./max. working height: 3/200 mm Feed speeds: 6 m/min. Planer shaft diameter / planer blades: 62 mm / 3 pcs. Speed: 5500 rpm Motor 400V/50Hz/S6 40%: 1.8 kW Extraction nozzle diameter: 2 x 120 mm Weight: 140 kg

Condition: new, Year of construction: 2025, FS 41 classic Tersa – Jointer-planer with TERSA quick-change cutterhead system With TERSA cutterhead for ultra-fast cutter blade changes TERSA cutterhead system enables particularly quiet operation Helically toothed steel infeed roller for consistent and uniform wood feed The particularly long, one-piece jointer tables allow for easy planing of workpieces Large jointer fence can remain in its position when the jointer tables are opened Rear-opening jointer tables The high machine weight ensures maximum precision and smooth operation Powerful industrial motor Robust steel/cast iron construction Model: FS 41 Classic Tersa Bsdecnxayjpfx Amzolk Item No.: 5503414 Technical data ---Technical data, jointer--- Total length of tables: 1800 mm Feed table length: 920 mm Table height: 870 mm Working width: 410 mm Max. chip removal: 4 mm ---Technical data, planer--- Dimensions of planer table: 605 x 420 mm Min./max. working height: 3 / 230 mm Feed speeds: 7 m/min Cutterhead diameter/cutter blades: 72 mm / 3 pcs. Speed: 5200 rpm Motor 400V/50Hz/S6 40%: 5.0 kW (6.6 hp) Dust extraction port diameter: 2 x 120 mm Weight: 270 kg Tersa cutterhead No more adjusting and screwing Cutter blade changes in seconds Self-locking Particularly quiet Planing unit Massive anti-kickback devices prevent workpiece kickback 3-blade Tersa cutterhead for optimal planing result Wood feed Helically toothed steel infeed rollers for a constant and uniform wood feed without marks 13 teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Dust extraction hose connection The dust extraction ports of the jointer (1) and planer (2) point in the same direction The hose connection is made from only one side No hose is needed that extends around the machine

Condition: new, Year of construction: 2025, Description Technical data Scope of delivery Accessories Optional equipment Ideal for demanding craftsmen and carpenters The particularly long, one-piece planing tables enable easy planing of workpieces. The work tables are made of gray cast iron, making them robust and permanently flat. Rear, simultaneously opening planing tables with spring support for quick and convenient adjustments. Thanks to the permanently mounted dust extraction hood, it is not necessary to disconnect and reconnect the dust extraction hose during adjustments, which saves valuable working time. The helically toothed steel infeed roller ensures a constant and uniform feed of the wood. The rubber outfeed roller at the end of the thicknesser ensures a uniform outfeed of the wood. Material feed with four speeds Thickness planer table adjustment via handwheel with integrated display for planer height DIGITAL version: with electric thickness planer table height adjustment and digital display On/off switch in operator position Powerful industrial motor The high machine weight ensures maximum precision and smooth operation. Preparation for long-hole drilling device Quality Made in Italy Dimensions and weights Bedpfjff Hdpox Amzelk Length approx. 2250 mm Width/depth approx. 1370 mm Weight approx. 695 kg Planer Total length of the tables 2250 mm Maximum chip removal 5 mm Fence length 1200 mm Fence height 150 mm Dust extraction connection Dust extraction nozzle diameter (thicknesser) 1 x 120 mm Drive power Main motor 7 kW Installation information Space required (length) 2250 mm Space required (width/depth) 1440 mm Explanation of space required: The dimensions take into account maximum travel distances or usable lengths. Thicknesser Thickness planer table length 850 mm Thickness planer table width 520 mm Working height min. 3 mm Working height max. 240 mm Working length min. 220 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Planing cutterhead Type TERSA Diameter 120 mm Number of planing knives 4 pcs Speed 5000 min¯¹ Planer width max. 520 mm Feed Speed 5/8/12/18 m/min

Condition: new, Year of construction: 2025, Jointer-Thicknesser minimax fs 41es TERSA Bsdpfjlht Htex Amzslk Maximum configuration for the professional user. Article number 5503431 Brand Holzkraft / SCM Helically toothed steel infeed roller for consistent and uniform material feed, enabling chip removal starting from 0.2 mm (with a minimum workpiece thickness of 3 mm) – ideal for economical planing of precious woods. Models with a TERSA cutterblock for seconds-fast planer blade changes and particularly quiet operation. Material feed with two speeds. Particularly long jointer tables enable easy and precise jointing of workpieces. Work tables made of grey cast iron, annealed and stress-free, making them insensitive and permanently flat. Tables that open simultaneously towards the rear for short setup times. Thickness table adjustment via handwheel with numerical display for planing height. High machine weight for maximum precision and smooth operation. Powerful industrial motor. Robust steel/grey cast iron construction. Quality – Made in Italy. TECHNICAL DATA Dimensions and Weights Length (product) approx. 2200 mm, Net weight approx. 450 kg Width/Depth (product) approx. 1160 mm Jointer Total length of tables 2200 mm, Jointer fence length 1200 mm Working height 905 mm, Jointer fence height 150 mm Chip removal max. jointer 5 mm Connection for dust extraction Dust extraction nozzle diameter thickness 1 x 120 mm Thicknesser Thickness table length 775 mm, Working height thickness max. 240 mm Thickness table width 410 mm, Chip removal max. thickness 5 mm Working height thickness min. 3 mm Electrical Data Power drive motor 5 kW, Mains frequency 50 Hz Connection voltage 400 V Planer cutterblock Planer cutterblock type TERSA, Planer cutterblock speed 5000 min⁻¹ Planer cutterblock diameter 95 mm, Planing width max. 410 mm Number of planer blades 4 pcs Feed Feed speed 6 / 12 m/min SCOPE OF DELIVERY Jointer fence with round bar guide & auxiliary fence Two feed speeds Tersa cutterblock Location: In stock, 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, 4-knife cutterhead for optimal planing results Smooth operation thanks to the precision unit and the heavy cast-iron construction Front steel infeed roller with helical gearing for optimal feed rate Satin-finished steel outfeed roller, optionally with a rubber roller in the outfeed The work table is mounted on four large columns, ensuring maximum stability under all working conditions. The thickness table adjustment is done via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Standard with two feed speeds, comfortably selectable from the operator's side Powerful industrial motor Stable steel and cast iron construction Equipment details: Work table Mounted on four large spindles, which ensure maximum stability under all working conditions A special lifting device ensures that the table position is maintained perfectly, even without locking TERSA planing cutterhead No more adjustment and screwing Planer knife change in seconds Self-locking Particularly quiet Thickness table adjustment on S 41 elite s via a handwheel with a numerical display for the set planing height (accurate to 1/10 mm) Dimensions and weights Length approx. 900 mm Width/Depth approx. 1070 mm Weight approx. 361 kg Dust extraction connection Dust extraction nozzle diameter for thicknessing 120 mm Drive power Main motor 5 kW Installation information Space requirement Length 1070 mm Space requirement Width/Depth 900 mm Space requirement Height 1100 mm Explanation of space requirement: The dimensions take into account maximum travel distances or usable lengths. Machine body Length 1040 mm Machine body Width/Depth 900 mm Length 3000 mm Width 1600 mm Explanation of working area: Please add the specified dimensions to the space requirement to obtain the recommended free installation area for the machine. Thicknessing Thickness table Length 423 mm Thickness table Width 775 mm Working height min. 3 mm Working height max. 240 mm Working length min. 180 mm Maximum chip removal 5 mm Electrical data Connection voltage 400 V Planer cutterhead Type TERSA Diameter 95 mm Number of planer knives 4 pcs Speed 5000 min¯¹ Bjdpod Hx Hnsfx Amzjlk Planer width max. 410 mm Feed Speed 6/12 m/min

Condition: used, mileage: 279,430 km, power: 260 kW (353.50 HP), first registration: 08/2015, fuel type: diesel, number of seats: 41, gearing type: mechanical, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, bathroom, electronic stability program (ESP), navigation system, onboard kitchen, parking heater, * Our internal number: 1014 * NEW PAINT in 05/2026 * MB Tourismo RH K * Vehicle registered and in operation - mileage and condition may therefore vary. * CLUTCH and dual-mass flywheel replaced in September 2025 * In September 2023, over EUR 24,000 net was invested in this vehicle, including, among other things, through Evobus, with a new turbocharger, new retarder, air conditioning compressor serviced, all V-belts and idler/tensioner pulleys replaced, transmission sealed, oil pan sealed, oil change, etc. * First registered 08/2015 * First owner + Will registration * Mileage - original * 6-speed manual transmission * 39+1+1 seats / adjustable sideways and rearwards * Three-point seat belts * Tables on the back of the seats * DVD and monitor * TINTED GLASS * Retarder * Cruise control * Distance control cruise control * ABS, ESP, EBS * Fog lights * Immobilizer * LED lighting * Brake assist * Lane keeping assist * Rear view camera * Toilet * On-board kitchen * Nozzle ventilation * Reading lights * Ski box compartment * Trailer hitch * Central locking * Raise/lower * USB connection * NEW TIRES ON FRONT AND REAR AXLE in August 2025 * Vehicle length: 10.32 / 2.55 / 3.37 m+ * etc. * PICK-UP PRICE - FINAL PRICE! Bledpfsy U A S Sjx Amzek * All information without guarantee * Subject to prior sale * We refer to our terms and conditions

Year of construction: 1997, condition: good (used), Output: 55.6 kW Two cooling circuits: 2 x 27.8 kW Blodpfsg A Rq Eox Amzjk Refrigerant: R 22 (uncharged) Year of manufacture: 1997

Condition: excellent (used), DREHER MILL S26 / 41 VS with cyclone and fan Bledpfxsgphqcs Amzjk Power: 11 KW Rotor diameter: 260 mm Rotor width: 410 mm 4 rotor knives, 2 rows of stator knives Inlet cross section approx. 260 x 410 mm Brqvu3zxfl Cutting mill with integrated noise protection. For plastic processing pipes, profiles, injection molding

Condition: excellent (used), SCM Casadei C 41 C Universal Combined Woodworking Machine with FT 200 Dust Extractor For sale is an SCM Casadei C 41 C universal combined woodworking machine, manufactured in 2016. The machine was purchased new from Hudek Zagreb d.o.o. and has been used in production. It is fully operational and can be inspected and tested by prior arrangement at its current location in Antunovac, Croatia. The machine combines several woodworking operations in a single compact unit: Surface planing Thickness planing Sawing Spindle moulding Drilling and mortising Scoring Sliding-table operation Machine identification: Manufacturer: SCM Industria S.p.A. Make: SCM Casadei Model: C 41 C Type: C 41 Designation: Universal combined woodworking machine Year of manufacture: 2016 CE-certified version Country of manufacture: San Marino Machine weight: 628 kg Planer and thicknesser: Working width: 410 mm Surface planer table length: 1,800 mm Thicknessing capacity: 3.5–230 mm Bledpfjznbyxox Amzsk Thicknesser feed speed: 7 m/min Circular saw: Tilting saw unit: 90–45° Maximum saw-blade diameter: 315 mm Maximum cutting height: 100 mm Maximum rip-cut width on the right: 900 mm Scoring unit Sliding table Sliding table: Sliding-table length: 2,310 mm Spindle moulder: Spindle speeds: 3,500 / 7,500 / 10,000 rpm Spindle diameter: 30 mm Usable spindle height: 120 mm Drilling and mortising unit: Table travel: X 160 / Y 105 / Z 115 mm Wescott drill chuck: 0–16 mm Electrical and safety equipment: Three motors: 3 × 5.0 kW Power supply: 400 V, three-phase Frequency: 50 Hz Rated current shown on the machine nameplate: 10 A Motor brakes Emergency-stop button CE version Included equipment: An FT 200 dust extractor, rated at 1.1 kW, including a flexible extraction hose, is included with the machine. Condition and availability: Condition: used and operational Previously used in production Availability: immediately Inspection and test run possible by prior arrangement Location: Antunovac, near Osijek, Croatia Price: €7,500 plus VAT The price is negotiable for a serious buyer following an inspection of the machine.

Condition: good (used), mileage: 180,400 km, power: 121 kW (164.51 HP), first registration: 01/2019, fuel type: diesel, axle configuration: 4x2, wheelbase: 4,330 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: mechanical, number of gears: 6, emission class: euro6, number of seats: 3, total length: 7,020 mm, total width: 2,160 mm, permissible axle load (axle 1): 1,850 kg, permissible axle load (axle 2): 2,800 kg, loading space length: 43,500 mm, loading space width: 21,000 mm, loading space height: 4,000 mm, Year of construction: 2019, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power assisted steering, power mirror, tail-lift, trailer coupling, = Additional Options and Accessories = - Automatic low beam headlights - Passenger seat - Euro 6 emission standard - Driver airbag - Remote central locking - Cruise control - Height-adjustable driver's seat - Rain sensor - Bumpers in body color - Partition with window = Additional Information = General Information Number of doors: 2 Cab: single License plate: VSP-41-H Technical Information Number of cylinders: 4 Engine displacement: 2,299 cc Front axle: Max. axle load: 1850 kg; steered Rear axle: Double tires; Max. axle load: 2800 kg Weights Unladen weight: 2,921 kg Payload: 1,579 kg GVWR: 4,500 kg Functional Tail lift: D'HOLLANDIA DHLM.10, rear door, 750 kg Maintenance, History, and Condition APK (Technical Inspection): valid until 07/2027 Technical condition: average Optical condition: good Bjdpfx Amszin Daezslk

Year of construction: 2002, condition: used, diameter 180 mm workpiece length 0 mm work piece width 1350 mm Bodpet Hw Shofx Amzjlk total power requirement 65 kW weight of the machine ca. 7.500 kg dimensions of the machine ca. m

Condition: used, mileage: 652,100 km, power: 220 kW (299.12 HP), first registration: 01/2016, fuel type: diesel, number of seats: 41, gearing type: automatic, next inspection (TÜV): 06/2027, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), Our reference number: 1191 Mercedes-Benz Citaro C2 LE Output: 220 kW Emission class: Euro 6 Vehicle class: M3 First registration: 01/2016 * Automatic transmission D/N/R * 41 seats * 57 standing places * LAWO destination display front/side/side/rear * LAWO SicmaControl control unit * Electric sunblind * Electric driver's window * Reversing camera * Camera monitoring of door 2 (rear) * Air conditioning * Radio * Mechanical folding ramp * Multi-purpose area - wheelchair / stroller space * Convector heater Bsdjzi Ri Sepfx Amzolk * Blind spot camera system, on the right side - Rosho - Yellow & Red triangle -> Danger * Digital tachograph * GorbaTime clock * Original mileage * Driver's door with cash box insert * Several poster mounting options * STOP button * VEHICLE STOP indicator * Signage: foil / glued * Paint color: white Note: Vehicle may be registered - mileage and condition may vary The customer is obliged to independently verify the condition and equipment of the goods / vehicle! All information without guarantee We reserve the right of interim sale We refer to our general terms and conditions.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, planing width: 410 mm, number of blades: 3, - Planing cutterhead with 3 knives - Self-adjusting planing knives - Planing width 410 mm - Surfacing length 2600 mm - Max. stock removal 230 mm - Motor power 4 kW / 5.4 hp Bledpfx Ajzidtkomzek - Dust extraction port Ø 120 mm

Condition: good (used), Gear motor, electric motor, three-phase motor, electric gear motor -Speed: 41 rpm -Power: 0.12 kW -Construction: B3 angle -Diameter shaft: 9 mm -Protection class: IP 21 -Dimensions: 210/150/H135 mm Blodocdga Topfx Amzok -Weight: 2 kg

Condition: good (used), Contactor, semiconductor contactor, contactor -Max. 30 kW 660 V -Price: per piece Bjdpfx Ajb A N Akjmzelk -Quantity: 17 pieces available -Weight: 2 kg

Condition: used, Vernier caliper, caliper, vernier caliper -Manufacturer: Holex, digital caliper .: 41 5528 800 -Measuring range: 0-300 mm -Measurement accuracy: 0.01 mm -Quantity: 1x calipers available Blodjr A H Sqepfx Amzek -Dimension case: 1060/280/H50 mm -Weight: 3,3 kg.

Condition: good (used), Conveyor belt, belt conveyor, transport belt, belt conveyor, steep conveyor, steep conveyor belt, chip conveyor, chip conveyor belt -Conveyor belt: Transport belt with base frame -Speed: 41 m/min -Belt width: 480 mm -Conveyor length: approx. 4000 mm -Motor/transmission: SEW Vector, 0.55 kW / 110 rpm -Overall dimensions: 4540/730/H1090 mm -Weight: 300 kg Bjdpfxoh Ak Ule Amzolk

Condition: good (used), Pallet rack, heavy-duty rack, high-bay rack, boltless rack, storage rack stand -Pallet rack: Boltless rack 2 bays / rack length 3900 mm -Field width: 1800 mm Bjdpfew Thy Dex Amzolk -Shelf height: approx. 3200 mm -Stands: 3 pieces 3155/1240/100 mm -Cross braces: 20 pieces 1865/60/240 mm -Shipping/Price: complete -Transport dimensions: 3200/1250/H660 mm -Total weight: 352 kg

Condition: good (used), pallet rack, heavy-duty rack, high-bay rack, boltless rack, storage rack stand -Manufacturer: SSI Schäfer, pallet racking boltless racking 6 bays / rack length 17100 mm -Field width: 2700 mm -Shelf height: approx. 3500 mm -Stands: 7 pieces 3600/1105180 mm -Cross braces: 30 pieces 2770/65/250 mm -Shipping/Price: complete -Transport dimensions: 3620/1150/H1050 mm -Total weight: 726 kg Bljdpfxsw R Raho Amzok

Condition: good (used), Interchangeable jaws, top jaws, three-jaw chucks -for: Power chucks -4 sentence: hard cheeks -7 sentence: soft cheeks Bodpfob A R I Tox Amzjlk -With ground groove and pointed tooth pitch: 1.5 mm -Price: complete -Weight: 6 kg

Condition: good (used), Fan, blower, electric motor, blower, radial fan, emergency ventilation fan, flue gas fan, axial fan, axial ventilator, axial fan -Manufacturer: Ziehl-Abegg, axial fan -Type: FE050-4EK.41.V7 -Power: 0.78 kW / 1250 rpm Blodpfxeizxq Ao Amzok -Fan: Ø 585 mm -Number: 1x fan included -Price: per piece -Dimensions: 585/585/H185 mm -Weight: 13 kg/pc.

Condition: used, Backhoe bucket, excavator bucket, demolition bucket, trenching bucket, excavator bucket -Excavator bucket: heavy design, very stable -Width: 410mm -Height: 630mm -Depth: 1050 mm -Hole: bore Ø 45 / 52 mm, dimensions see photos -teeth Bjdpsttc Sxefx Amzjlk -the holder on the spoon: can be changed by us for an additional charge -Transport dimensions: 1050/410/H710 mm -Weight: 116 kg with pallet

Condition: good (used), Wood router bit inserts, knife inserts, form cutter inserts Blodpfxeb A St Ts Amzek -Blade width: 60 mm -Blade thickness: 2 mm -For milling cutters: Ø 180 mm Price: complete -Weight: 2.3 kg

Condition: good (used), geared motor, electric motor -Speed: 41 rpm -Power: 0.37 kW -Design: B14 angle -Shaft diameter: Ø 30 mm -Brake: 24 V -Protection class: IP 65 -Weight: 29 kg Bsdpsb A Ngcofx Amzolk

Condition: used, Gearboxes, pinion gears, angular gears, transmission gears -Translation: 41:1 Bljdpfxjd Rzc Ej Amzsk -Drive shaft: Ø 18 x 25 mm -Hollow shaft: Ø 40 x 130 mm -Price: per piece -Number: 2 pieces -Dimensions: 300/150/H260 mm -Weight: 12.5 kg/piece