Used Festo Mppe-3-1/2-6-010B for sale (124,205)

Condition: excellent (used), axle configuration: 3 axles, first registration: 11/2011, tire size: 385/55/22.5, Year of construction: 2011, Lifting roof Separate floor/two-cylinder system Giedpfxoyxw A Ts Alxst Independent operation Remote control = Further information = Tyre size: 385/55/22.5 Rear axle 1: Steered; Tyre tread left: 65%; Tyre tread right: 65% Rear axle 2: Tyre tread left: 65%; Tyre tread right: 65% Unladen weight: 10,800 kg Technical condition: very good Visual condition: very good

Condition: used, functionality: fully functional, load capacity: 3,500 kg, Multi-pallet fork ISO class: ISO class 3 = 2,500 - 4,999 kg Condition: Ready for use and fully operational Technical condition: good Giedpfjyzdfgjx Alxst Description: ISO 3A (51 cm) Capacity 3,500 kg Sideshift Opening range 560-2,410 mm Width 1,670 mm Forks 1,150 mm ID OS1933

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Gijdpfouxfu Nsx Alxjt Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Year of construction: 2026, condition: new, Bosporas Machinery is a manufacturer of coil processing lines, roll forming lines and press feeding systems, delivering high-performance and customized industrial solutions worldwide. Our compact coil slitting lines are designed for efficient and precise slitting of light and medium gauge materials. These systems offer flexible configurations ranging from entry-level compact lines to more advanced solutions with integrated straightening units. The lines are engineered to provide stable operation, consistent slit quality and optimized production efficiency while maintaining a compact footprint and cost-effective investment level. AVAILABLE CONFIGURATIONS 1 mm | 1300 mm | 4 Ton | Pitless Compact Slitting Line 3 mm | 600 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) 3 mm | 600 mm | 6 Ton | Slitting Line with Straightener Unit 3 mm | 1000 mm | 6 Ton | Compact Slitting Line (Pinch Roller Feeding) Gedpjyzbm Usfx Alxsit SYSTEM CONFIGURATION OPTIONS Depending on production requirements, the line can be supplied with: Straightener unit for improved material flatness and feeding stability Pinch roller feeding system for compact and cost-effective operation Single pit or pitless design based on layout requirements TECHNICAL RANGE Material Thickness: 0.3 – 3 mm Coil Width: up to 1300 mm Coil Weight: 4 – 6 Ton Slitting Accuracy: ±0.1 mm MAIN LINE COMPONENTS Hydraulic decoiler (expanding mandrel system) Coil loading system (optional) Infeed system with pinch rollers or straightener unit Slitting head with precision knife adjustment Scrap winder system Tension unit and separator system Recoiler with hydraulic mandrel Electrical control and automation system (HMI controlled) ENGINEERING FEATURES High precision slitting performance Adjustable slitting knives with fine positioning system Robust gearbox-driven slitting head Stable tension control system Compact and modular machine design Bidirectional operation capability OPERATIONAL ADVANTAGES Flexible configurations for different budgets and needs Compact design for limited factory space Stable and continuous production Easy operation and maintenance Short lead time compared to European manufacturers APPLICATION AREAS Steel service centers Sheet metal processing companies HVAC and construction materials Automotive sub-suppliers General metal processing industries

Condition: excellent (used), Used boltless shelving units Upright type S3 Height: approx. 446 cm (can also be shortened) Depth: 50 cm Longitudinal beams type S1 Length: 150 cm Godpfx Aljxxdkusxsit Double-section shelves: 90 cm + 60 cm Price applies to 11 uprights and 100 shelves, making 15m of racking Multiple sets available Delivery possible

Condition: good (used), Electric motor, three-phase motor -Manufacturer: ABM Greiffenberger, electric motor type 3 DF 1/132 Sa-2 -Power: 5.5 kW -Speed: 2890 rpm -Shaft: Ø 38 x 65 mm -Design: B5 -Protection class: IP 54/55 -Number: 2x available -Price: per piece Giedpfx Ajwkr Rvslxjt -Dimensions: 430/300/H250 mm -Weight: 36 kg

Condition: good (used), Electric motor, three-phase motor Gisdpfewktbpsx Alxet -Manufacturer: ABM Greiffenberger, electric motor type 3 DF 1/132 Sb-2 -Power: 9.2 kW -Speed: 2840 rpm -Shaft: Ø 38 x 80 mm -Design: B5 -Protection class: IP 54/55 -Dimensions: 450/300/H250 mm -Weight: 43 kg

Condition: used, fuel type: electric, Hydraulic pump, oil pump, hydraulic power pack, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor -comes from a Still forklift -Drive: 40 V 2.5 kW -Dimensions: 340/225/H300 mm Giedpfx Alecwqdfoxjt -Weight: 32 kg

Condition: good (used), Thread cutting head with Stehler jaws, thread cutting die -inch thread: 1/2"-3/4"-1" inch Gijdpfsb A N U Rox Alxet -Weight: 5 kg

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutting -inch thread: 1/2"-3/4" inch Giedsb A Rabjpfx Alxet -Weight: 4.5 kg

Condition: good (used), Thread cutting head with Strehler jaws, thread cutting die, Thread cutting machine, pipe thread cutter Giodpfxeb A Rluo Alxjt -inch thread: 1/2"-3/4" inch -Weight: 6 kg

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, total length: 1,200 mm, total width: 700 mm, total height: 2,000 mm, shelf length: 1,200 mm, load capacity per storage section: 140 kg, frame height: 2,000 mm, Equipment: double-sided, Used shelving. Modular, boltless shelving unit in very good technical condition. Galvanized shelf unit warehouse number: #77 METALSISTEM Giedpfxjvnzmcj Alxet Dimensions relevant to the price offer: - Frame/upright height up to 200 cm (we also have 250 cm height available) - Depth: 70 cm - Shelf width: 120 cm - Maximum shelf load: 150 kg with 4 shelves per section - For racks with fewer than 3 sections, shelf load capacity is 100 kg per shelf - Shelf adjustment every 5 cm The given price is for 1 add-on set to attach to the next section: 1 set includes: 1 upright/frame/side + 4 shelves To create a free-standing rack, 2 sets are required Section dimensions: Width – 120 cm Height – 200 cm Depth – 70 cm Shelf dimensions: Width – 120 cm Depth – 70 cm Approx. 2100 meters of this racking in stock Please browse our other listings for warehouse shelving

Year of construction: 2008, condition: like new (used), We sell a package of 26 cooling systems - Alfa Laval brand evaporators, all of which work on the glycol cooling system. The systems are powered at 220V or 380V or have an interchangeable power supply system according to the user's needs. The year of manufacture of the systems is 2008. We can sell also piece by piece not only as a package upon request. Commercial unit coolers designed for use in small and medium cold rooms from 10 up to 400 m³. Models designed for easy maintenance with immediate access to inspection areas. This series is available as a DX evaporator and brine unit cooler. Finned coil - H(C)FC Inner grooved Cu tubing ø 12 mm, triangular tube pitch - Brine Smooth Cu tubing ø 12 mm, triangular tube pitch - Corrugated Alu-fins - Fin spacings 4, 5.5, 6, 7, 8, 10 and 11 mm. • 1 to 4 AC fans, ø 250 mm up to ø 500 mm, drawing through the coil. Fan motors 230V/50-60Hz/1ph or 400V/50-60Hz/3ph in two noise levels (H/L). Motors with dynamically and statically balanced external rotors, manufactured in accordance with VDE 0530/12.84. • Corrosion resistant materials: coil frame AluZinc, casing strong and durable sheet metal, powder-coated RAL 9002. • Hinged drip tray and side covers for easy installation and maintenance. • Sufficient space for mounting of expansion valve inside the casing. Giedsg N Db Hspfx Alxet • Mounting brackets allow flush ceiling mounting. • Fitted with schräder valve on the suction connection for testing purposes. • Pumped system available on request. • Stickers indicate fan direction and refrigerant in/out. • Delivery in mounting position. Coolers are mounted on wooden beams. Installation can take place with the use of a forklift. 1 AlfaCubic series (BL, GL, RL) 2 Refrigerant system (E = dry expansion, W=water/glycol, 3 Noise level (H=high, L=low) 4 Fan diameter (25=250, 35=350, 40=400, 50=500 mm) 5 Number of fans (1 to 4) 6 No. of tube rows (A=4, B=6, C=8) 7 Phases (S= single-phase, D= 3 phases Δ connection) 8 Motor voltage (230V, 400V) 9 No. of circuits 10 Packing (CR=crate) 11 Casing material (AP= powder coated, SS= stainless steel) 12 Defrost system (A= air, E= electric defrost, HG= hotgas) 13 Fin material/coating (AL=aluminium, EP= epoxy coated aluminium) 14 Fin spacing (4, 5.5, 6, 7, 8, 10 and 11 mm) 15 Tube material (Cu=copper) The evaporator coils of these units are high performance and are built-in 1/2 ”fluted copper tube and fin corrugated aluminium with gaps of 3.5, 6 and 8mm. The frame, made of aluminium sheet, is provided with protection collars. This frame has the application of thermostatic expansion valves. Regarding their exterior structure, they are manufactured in aluminium painted in high resistance RAL-9018 polyester colour. The vibrations in these machines are avoided thanks to the fact that their entire structure is compact and highly rigid. All its parts are easily removable for maintenance. These evaporators are fitted as standard with helical fans with high-performance protection grilles and are equipped with 315 or 350mm motors. diameter. Single-phase for 230V 50Hz, with a degree of protection IP-54, with external rotor and low consumption. All motors are connected to a watertight general box, according to IP-55 regulations. Finally, defrosting is carried out with 230V electric heaters built in armoured stainless steel tubes. Its vulcanized ends avoid derivations and are inserted inside the battery and the tray. They are connected to a watertight junction box. Application: Lo

Condition: new, Festo EMMS-ST-87-S-S-G2 stepper motor 1370482 SN:MN-0001012, unused in opened original packaging, 100% functional, scope of delivery as per photos Gisdpfx Alji D H Smoxst

Condition: new, Festo DGSL-12-50-Y3A Mini slide 543979 ,unused in sealed original box, 100% functional, scope of delivery according to photos Gedpfx Alei D U Iuoxeit

Condition: new, For sale: professional electronic circulation pump Wilo Stratos 50/1-9 – high-efficiency, energy-saving, designed for heating and cooling systems. Technical specifications Manufacturer: Wilo Model: Stratos 50/1-9 Power supply: 1~ 230 V, 50/60 Hz Power: 25–490 W Current: 0.20–2.15 A Connection: DN50 (2”) Connection: flanged Operating pressure: PN6 / PN10 Protection class: IPX4D Max. medium temperature: up to 110°C Energy Efficiency Index: EEI ≤ 0.20 (ErP) Year of manufacture: 2015 Made in: Germany Condition Technically fully functional Very good visual condition Condition as shown in the photos Applications Heating systems Cooling systems Industrial and commercial buildings 📦 Possible shipping or personal collection 🧾 Invoice available Gsdpsyhhn Djfx Alxjit 🌍 Export sales also possible

Condition: excellent (used), For sale: Professional tube deburring machine TUBOGRAT, manufactured by the German company Tracto Technik Spezialmaschinen. The device is designed for processing tube ends and removing internal and external burrs. Ideal for workshops, production, and installation purposes. Robust construction ensures long and trouble-free operation. Technical data Manufacturer: Tracto Technik Spezialmaschinen KG Gedpfxoyvgp Tj Alxjit Model: TUBOGRAT TG 138 Diameter range: 6 to 42 mm Rotational speed: 180 rpm Direction of rotation: left Power supply: 380 V Phases: 3 Frequency: 50 Hz Power: 0.12 kW Current: 0.4 A Condition Device in good technical condition Visible signs of use Machine is operational

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Gijdpfxexmt Eqo Alxst

Condition: new, 6 GN *1/1 bain marie + heated plate -Dimensions: 2335*1100*900 mm -Related options: Top and alcove decoration -Built-in element CCS3G -Built-in element PCV2G -Buffet stand with LED lighting -Glass Gedpoxwchvofx Alxjit

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO type PAS43SBG1800 / BMH1002T07F2A Year of manufacture: 2012 Vertical stroke via Schneider Electric linear axis PAS43SBG1800 Travel: 1800 mm Travel per revolution: 20 mm Maximum speed: 1 m/s Drive element: ball screw Guide type: recirculating ball linear guide size 20 Payload: 60 kg Maximum speed, ball screw: 3000 rpm Motor type: Schneider Electric BMH1002T07F2A Rated voltage: 240 Vrms Rated power: 1.912 kW Rated speed: 3500 rpm Max. current draw: 29.4 A Horizontal travel: 670 mm via Festo pneumatic cylinder Gripper opening: 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper jaws open pneumatically - Unit mounted on welded square tube frame Total weight: approx. 380 kg Overall dimensions (W x H x D): 1280 x 2950 x 1150 mm Very good condition Nearly identical linear unit under stock number 59700 Drive controller 61488 = suitable for linear units 59702 + 59700 Gjdpfx Aow Uc T Ijlxoit

Condition: new, Pneumatic Cylinders / Cylinders: 1. FESTO Type: DSBG - 160 - 735 - PPVA - 3 (new). Diameter: 160 x 735 2. Type: BOSCH / REXROTH - 4 units. Giodjyvwc Ijpfx Alxot 3. Type: BOSCH / REXROTH - 2 units.

Condition: new, For sale: professional electric motor from the renowned German manufacturer Bauknecht Antriebstechnik. The motor is brand new – ex-stock. It has never been used in operation and may have only minor storage marks visible in the photos. Godpfx Asyv R Tgjlxsit Robust, industrial-grade construction – ideal for demanding applications. 🔧 Technical specifications: Manufacturer: Bauknecht Antriebstechnik Model: 3~Mot 160M Power: 11 kW Speed: 2930 rpm Voltage: 380 V Current: 22 A Frequency: 50 Hz Protection class: IP54 Insulation class: B Duty type: S1 (continuous) Cos φ: 0.88 Design: IMB5 (flange-mounted)

Condition: used, Linear unit, linear axis, gantry axis with servo drive, synchronous servo motor, electric slide, loading unit, linear guide with servo motor and pneumatic gripper SCHNEIDER ELECTRIC / FESTO Type PAS43SBG1800 / BMH1002T07F2A Year of manufacture 2012 Vertical stroke via linear axis Schneider Electric PAS43SBG1800 Travel distance 1800 mm Travel distance per revolution 20 mm Maximum speed 1 m/s Drive element Ball screw drive Guide type Recirculating ball bearing guide size 20 Payload 60 kg Maximum speed ball screw 3000 rpm Motor type Schneider Electric BMH1002T07F2A Rated voltage 240 Vrms Rated power 1.912 kW Rated speed 3500 rpm Current consumption max. 29.4 A Horizontal travel 670 mm via Festo pneumatic cylinder Gripper opening 600 - 670 mm - Pneumatic gripper on guide carriage - Gripper opens pneumatically - Unit is mounted on welded square tube frame Giedpfxogf Ix As Alxjt Total weight approx. 380 kg Overall dimensions W x H x D 1280 x 2950 x 1150 mm Very good condition Almost identical linear unit under stock number 59702

Condition: used, Pneumatic cylinder FESTO DNU-40-125-PPV-A 14137. Giedpfxslkchre Alxst

Condition: as good as new (ex-display), Year of construction: 2017, Siemens BD2 BD-2 busbar - busbar system Compatible with the Klöckner Möller BD 2 rail including connector, end cap and holder Type BD2 - 400 amp - 5 pole (L1 L2 L3 N PE) Are available : 41.6 running meters (13x 3.2m) 400A rail, almost as good as new 19.2 running meters (6x 3.2m) 630A rail, used (Klöckner Möller) Voltage Ui max. 660V, frequency 16.66 - 60 Hz Tap-off boxes with the following current strengths are also available: 25 - 50 - 125 - 160 - 250A Gedpfjcumxcox Alxoit We can offer you a complete system. Prices are per linear meter The dismantling was carried out by a qualified electrician. Busbars are in MINT condition!!!! Please inquire about lengths or accessories! Stock items, available immediately!!! ----- old Kloeckner Moeller BD1 system still available! Busbars, corner parts, feeds and outlet boxes for the old Kloeckner Moeller BD1 / BD 1 system in stock!!! Please ask ! Are you also looking for a crane system? Demag KBK systems, column slewing cranes, wall slewing cranes are available multiple times!!!!