Used Filling Line for sale (11,966)

Condition: used, 72”x 0.5” x 60,000Lb Braner Turret Type Loop Slitting Line Braner Turret Type Loop Slitting Line is used for coil metal cross cutting with maximum width 72”, maximum 0,5” metal thcikness and 60,000Lb coil capacity Make: Braner Year New: 1996 Material Thickness: .060″ – .500″ Material Width: 12″ – 72″ Coil Weight: 60,000Lb Line Speed: 120 – 250 feet per minute Coil ID: 20″ – 24″ Coil OD: 75″ Slitting Cap: .500″ / 4 cuts – .125″ / 40 cuts Entry L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Control Panel Mandrel Uncoiler Powered Hold – Down Roll Outboard Bearing Support Hydraulic Feed-Up Drive Water Cooled Brake Hydraulic Peeling Table Driven Entry Pinch Rolls Adjustable Edge Guides Entry Mechanical Crop Shear Two Turret Type Slitting Heads Arbor Diameter: 12″ Powered Arbor Adjustment Powered Head Rotation Motor: 100HP DC Drive Iaodpfx Abern Sqho Net Lots of Knives & Tooling Two (2) Scrap Winders Powered Open / Close Heavy Duty Design Looping Pit Cross Over Table Drag Board Tension Stand Material Feeding Table Recoiler Hydraulic Drum Powered Push Off Hydraulic Over-Arm Separator Outboard Bearing Support 300HP DC Motor Drive Exit L-Type Coil Car Hydraulic Lift & Traverse Self Contained Hydraulics Upgraded Siemens Digital Drives, Electrics, Controls, Knives & Tooling

Condition: used, Coil Width: 12″ – 60″ Material Thickness: .015″-.135″ Coil ID: 20″-24″ Speed: 180 fpm Direction: Left to Right Entry Floor Standing Coil Car Mandrel Uncoiler with Powered Expansion Motorized Hold-Down Roll Feed-Up Drive Hydraulic Peeler 9-Roll Coil Straightener with 4″ Work Rolls Driven Entry Pinch Rolls 40HP Motor Adjustable Hump Table Mechanical Shear Belt Conveyor with Positive Stop Device Air Gate Sheet Stacker, with Two Section of Gravity Rolls Iaedpfxeihf Tps Ab Not

Condition: used, Cut-to-length line Delta-Alcos 72”x0.5”x60,000Lb (A3770) Make: Delta / Alcos Material Width: 36" - 72" Thickness Capacity: .048" - .530" Weight Capacity: 60,000Lbs Coil ID: 16" - 24" Coil OD: 72" Yield Strength: 50,000PSI Direction: Right to Left Coil Storage Conveyor Entry Coil Car Hydraulic Lift and Traverse Cone Uncoiler DC Motorized Brake Sliding Base Wichita Cooled Brake Powered Hold-Down Roll Hydraulic Peeling Table Powered In & Out Set of Driven Pinch Rolls Delta Corrective Plate 4-Hi Leveler Number of Work Rolls: 9 Work Roll Diameter: 8" Work Roll Width: 82" Powered Up & Down Back-Up Flights DC Motor & Drive Delta Corrective 4-Hi Leveler Number of Work Rolls: 19 Work Roll Diameter: 4" Work Roll Width: 82" Motorized Back-Up Flights Powered Work Roll Adjustment DC Motor & Drive Alcos Mechanical Shear Down Cut Shear Driven Entry Pinch Rolls Pneumatic Clutch & Brake AC Motor Drive Alcos Drop Type Stacker 40' Sheet Length Driven Exit & End Conveyrors Touch Screen Digital Panel Iodpeixqg Nofx Ab Nsat Operator Push Botton Station Digital Read Outs Hydraulics, Electrics, Controls, Presently Installed

Condition: used, 72″ x .187″ x 20,000Lb Universal Slitting Line Material Width: 12″ – 72″ Material Thickness: .015″ – .187″ Coil Weight: 20,000Lb Coil ID: 20″ Coil OD: 72″ Direction: Left to Right Entry Floor Standing Coil Car L-Type Design Hydraulic Lift & Traverse Mandrel Uncoiler Powered Hold-Down Roll Iaodpfx Ajihf Twob Net Hydraulic Expansion Air Cooling Brake Sliding Base Hydraulic Peeling Table Slitting Head Arbor Diameter: 7″ Powered Arbor Adjustment 100HP DC Motor Knives & Tooling Recoiler Powered Push-Off Hydraulic Over-Arm Separator Hydraulic Expansion 100HP DC Motor Exit 2-Arm Turnstile Arm Width: 72″ Powered Rotation Complete Slitter with Electrics, Hydraulics, Controls, Tooling

Condition: used, machine/vehicle number: 007924, Position 1: Panel Feeding and Loading BARBERAN-RFU-4-C-1700 Position 2: Brushing Machines BARBERAN-RFU-4-C-1700 Position 3: Calender BARBERAN-RFU-4-C-1700 Position 4: Gluing Machine BARBERAN-RFU-4-C-1700 Position 5: Continuous Cycle Presses BARBERAN-RFU-4-C-1700 Position 6: Panel Stacking and Offloading BARBERAN-RFU-4-C-1700 Iedpfswu Agcsx Ab Nsat

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: K-89404748-10327777, type of input current: three-phase, total width: 2,134 mm, total length: 4,268 mm, total height: 2,750 mm, input voltage: 460 V, input frequency: 60 Hz, 3 phase, 460v (5) Washing valves, (1) Fill head Capacity: 30-90 kegs/hr (15.5gll clean and fill time: 2 mins) Compatible keg sizes: 7L to 58L (239mm to 425mm D x 320mm to 610mm H) Also compatible with disposable Petainer kegs Iaodev Ncmyspfx Ab Net Filling Accuracy +/- 0.19% Integrated exterior and interior washing, racking, filling, control, and exit conveyor w/ slide Requires de-install in Michigan, USA. Contact us for details!

Condition: used, Year of construction: 2000, Used Rondo line. Ijdpex Swucefx Ab Nsat We also have the following items listed on the side. Hoba B.v. HSA 5 (year 2012), Kemper Multimatic (year 2004), Plus three Varimixer Bear ERGO Mixers (year 2003-2006) All these items are available together, plus the mixers for 60,000 EUR, plus packaging and shipping.

Condition: used, Year of construction: 2004, functionality: fully functional, input voltage: 400 V, We offer this used Kemper Multimatic spiral mixer, year of construction 2004. Manufacturer: Kemper Model: Multimatic Year of construction: 2004 year Condition: used Category ID: 1005 Type ID: 187 Machine type: Dough line for hamburgers and hot dog buns Iasdpfx Ajx R Ugmsb Njt We also have the following items listed on the side. Hoba B.v. HSA 5 (year 2012), Rondo ZGP665.C (year 2000), Plus three Varimixer Bear ERGO Mixers (year 2003-2006) All these items are available together, plus the mixers for 60,000 EUR, plus packaging and shipping. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: excellent (used), Year of construction: 2019, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 8135.44, cutting height (max.): 100 mm, cutting depth: 300 mm, Great saw always cuts to 0.5 for age hardy used Ijdpfx Abeyngnio Njat

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, 1 x Carnitech twin-lane pin-bone removing and packing line. This machine is designed for removing pin-bones ensure a high product quality and helps to achieve a maximum yield at shorter time. Head end first and skin side down, the salmon fillets are conveyed to the pin-bone head on a pvc belt. Carnitech pin-bone removers treat the fillets very gently. This system is suitable for processing both salmon and trout. Type - CT 2612. Serial number - 98 949. Pin-Boner Date of manufacture - 2000 (refurbished approx 2 years ago). Packing Line Date of manufacture - 2023/24. Capacity / Output - up to 36 fillets / minute. Size of fillet - between 0.5 kg up to 4 kg. Iaedpfx Abjy Swi He Njt

Condition: used, PSW Industrial Spray Booths / Paint Line with Conveyor, Extraction & Wash Chamber – Used Description: A substantial PSW industrial spray booth / paint spray line system, suitable for coating, spraying and finishing applications. The installation includes enclosed blue spray booth sections, overhead conveyor track, extraction/ventilation units, ducting, filtration and wash chamber equipment. This is a robust, heavy-duty industrial setup formerly used in a production environment. PSW Spray booths system includes associated air handling/extraction equipment, control panels, compressed-air filtration/regulation, spray area sections and conveyor hangers. The system would suit a buyer looking for a complete used spray booth installation for refurbishment, relocation, spares, or re-commissioning subject to inspection and compliance checks. Key features: PSW Spray booths industrial spray booth system Enclosed booth sections with access/opening points Overhead conveyor rail with multiple hanging brackets Extraction / ventilation units and ductwork included Wash chamber section Air filtration / compressed air regulation equipment Control panels and gauges present Large-capacity industrial construction Suitable for paint, coating or finishing operations Available for removal from site Details: Manufacturer: PSW Spray booths Iedpfx Asy Rflyjb Neat Type: Industrial spray booth / spray line system Water wash / washing chamber indicated Tank capacity plate show approximately 900 litres Spray booth number 051479 Rinse aid solution Condition: Used industrial equipment. The booths are currently installed and complete, but they have been idle and should be inspected by the purchaser. There are signs of normal industrial use, overspray, paint wear and age-related cosmetic marks. Sold as seen, with no warranty implied unless otherwise agreed.

Condition: used, Norpak Magazine Sorting and Polywrapping Line, Variable Size Infeed Hopper A4 - A5, In Leaf Capability, 4 Document Feeder A4 - A5, Poly Wrap Station with Heated Sealer Bars & Cut Off, Outfeed Conveyor, 8m x 3m Foot Print, Including Extraction System. S/No. 0701047 (Selection of Polywrap & Potato Starch film) Location: These lots are located in Aldridge, West Midlands, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Iasdpfx Asy Sg S Rsb Not

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 Ijdpfxey R Tk Rs Ab Noat HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Condition: like new (used), functionality: fully functional, gearing type: hydrostat, fuel type: electric, Year of construction: 2024, operating hours: 500 h, Complete uPVC Window & Door Fabrication Line – Ready To Operate Iedpsy Sbu Tofx Ab Noat Modern and clean fabrication setup suitable for manufacturing uPVC windows and doors. The line is in very good condition, fully functional and ready for immediate use. Manufactured by Özgenç Makina. Ideal for start-up business or expansion of an existing fabrication company. Setup includes: * Cutting and welding machinery * Corner cleaning equipment * Work tables and storage racks * Air compressor and accessories * Clean workshop environment * 3 phase ready setup Well maintained and lightly used. Can be sold as machinery only or together with the workshop setup by separate negotiation. Viewing welcome by appointment. Transport can be arranged at buyer’s cost. Serious enquiries only. Price is £34.590

Condition: used, Year of construction: 2020, material thickness 0,5-50 mm material width 1500 mm feed 4 m/min Operating hours 900 h The machine was completely overhauled in December 2015The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop Ijdoy S Diaepfx Ab Nsat If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: used, Year of construction: 2002, DRAW-SIZE-WARPING LINE FOR FILAMENT YARNS TO PROCESS POY (FROM BOBBINS) INTO FULLY DRAWN SIZED WARP BEAMS : MAKE : SUCKER-MUELLER - HACOBA TYPE : NZB-Z WW : 180 cm YOC : 2002 ( USED ONLY 4 YEARS!, then stored ) SPEED : 500 M/ MIN EQUIPPED WITH : Iaedpfsy Spl Hox Ab Nst - WAXING ROLL - 2 HOT AIR DRYING CHAMBERS (1995) 150˚C - 9 STEAM DRYING CYLINDERS 180cm ( 1995) 130 ˚C - YARN TENSION CONTROL SYSTEM BY ‘TENSOSCAN’ - YARN DRYING CONTROL SYSTEM BY ‘PLEVA’ - YARN BREAKAGE INSPECTOR BY ‘CAMSCAN’ CREEL WITH BOBBIN CARRIAGE MAKE : ROSTONI TYPE : RCS/GB/1344 YOC : 1995 NO. OF BOBBINS : 1344 EQUIPPED WITH : - MOVABLE TENSIONER FRAME - EYE GUIDE BOARD - TENSION VARIATION SIZING KITCHEN MAKE : MARIOTTI & PECINI YOC : 2002 CAPACITY : 700 LITERS INOX TUB + INOX STOCK TUB 700 LITERS WITH ASSEMBY BEAMER 300CM MAKE : SUCKER-MUELLER TYPE : WN YOC : 1985 BEAMNING SPEED : 150 M/MIN WW : 300 CM BEAM DIA : MAX 1000 MM BEAM WIDTH : 3000 MM ( ROLL WIDTH 3200MM) - LEAVELING DEVICE SYSTEM ( FOR 8 SECTION BEAMS) - WITH TENSION CONTROL SYSTEM FOR WARPBEAMS - WITH 2 x DOUBLE DECK BEAM STAND FOR 10 BEAMS & 6 BEAMS BY SUCKER MULLER ( 1987) TYPE AB50

Condition: used, Year of construction: 2020, functionality: fully functional, Complete Used Peeling Line Complete used peeling line for sale, two available. This line was installed in 2020 and decommissioned at the start of 2025. Each line was previously doing up to 14 tonnes of product a week, can be used for potatoes, carrots, swede, parsnips etc. Each line consists of: Bin tipper dimensions (with frame) approx 2.670 m wide x 1.91m tall x 2.240 m long Large boat hopper. Conveyor belt width 500mm x belt length 1900mm long Elevator with hopper into peeler 3700mm high x 400mm wide Vegetable/potato batch peeler Waste water unit Surge tank with water sprayer Roller inspection table 900mm wide x 2.9m long Incline slatted conveyor Belt 400mm wide x 2800m long Surge tank 600mm wide x 2.3m long Dip Wheel Drywhite container Weigher & bagger with metal detector Ijdewak Aiepfx Ab Noat Also includes waste conveyors and all associated control panels. This can be sold as two complete line, one complete line or as individual machines depending on your requirements.

Year of construction: 2022, condition: used, 10 Bin Food Grade Multi Head Filling Machine complete with Loading Hopper with 300kg Capacity, Hopper feeds Bucket Elevate on Machine demand and applies product into Multihead Bins to service Doypack Machines. Can be set up on dual floors (as pictured) or utilise Tower Framework. All Multihead Bins are serviceable and can be cleaned down, PLC Controls allow programming both in Multihead Element but also on the Doypack Machines. (2022). Country of Origin: United Kingdom Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Offers considered prior to auction Iodpfx Ajy Rzfvjb Noat

Year of construction: 2024, condition: new, This battery filling system is suitable for traction batteries with 12 cells, 24 volts. Price is excluding VAT. Also in stock: battery filling system 24 cells, 48 volts --> 319 ex VAT; battery filling system 40 cells, 80 volts --> 389 ex VAT. Iasdpfxoy Sm Iro Ab Net

Condition: good (used), With this jug, you automatically refill your battery with demineralized water. Indispensable! Price includes shipping costs within the Netherlands. Iasdpfxoy Sm Hhj Ab Njt

Operating hours: 200 h, condition: ready for operation (used), functionality: fully functional, Complete Equipment Sale for Cheese/Dairy Production 1 - 500 l/h ATA brand pasteurizer, three-phase 1 - Horizontal cheese press, capacity for 48 kg, 4-position 1 - 150 l ricotta vat, three-phase 2 - 300 l refrigeration cabinets with three levels of separation 1 - 220 l coagulation vat, three-phase 1 - 150 l coagulation vat 2 - Hand wash sinks 2 - Work tables 1 x 1.70 m 1 - Vacuum machine 40 - Stainless steel cheese curing racks 0.64 x 0.52 m Ijdpfx Ajy Rv Edjb Njat 2 - Rack trolleys for racks 1 - Stainless steel table with shelves 0.6 x 1.45 m 1 - Table with sink and sliding doors 0.6 x 1.45 m 3 - 30 liter aluminum cans 2 - 50 liter aluminum cans 1 - Boot washer 1 - 600 liter refrigerated milk tank

Condition: good (used), For sale: Baking trays with gutters brand: SASA Iodpjrt Uw Rsfx Ab Neat number of pieces in total: 550 baking trays total price: €25,000 dimensions: Length: 200 cm width: 80 cm height: 5 cm gutter width: 9.5 cm number of gutters per plate: 21 gutters The baking trays come from a current Mecatherm Line See also the photos All as good as new and still provided with a Teflon layer and all the plate are stainless steel. Viewing is possible on location If you have any questions, we'd love to hear from you! Kind regards, Leo Holland for sale: baking trays with gutters brand: SASA total number of pieces: 550 baking trays total price: 25,000,- dimensions: Length: 200 cm width: 80 cm height: 5 cm width gutter: 9.5 cm number of gutters per plate: 21 gutters See also the photos All as good as new and still provided with Teflon layer and all plates are made of stainless steel The baking trays come from a current Mecatherm Line Viewing is possible on location If you have any questions, we would like to hear from you! kind regards, Leo Holland

Condition: like new (used), Year of construction: 2020, Ficep Raz 601 (also known as Nozomi) Ijdpfx Abjxq Rpnj Noat Automatic 9-axis CNC thermal coping robot Section size [min. mm]: 80x10 Section size [max. mm]: 610x450 Plasma torch [qty]: 1 Infeed length: 16 m Outfeed length: 16 m

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, DG Line 6500 Automatic Perforating/Creasing Machine with Low Pile Feeder. The PIT STOP DG Line 6500 is perfect for companies offering print-on-demand services and requiring high-quality results from digitally printed materials, with fast and straightforward operation. The format is suitable for digital printing and also for book covers (books on demand) with an extension to 50×85 cm, or standard operation at 50×70 cm without the extension. Additionally, the PIT STOP DG Line 6500 can be equipped with a standard perforating kit (optional extra), which is programmable directly via the user display. Sheet Size Min / Max: 8×10 cm / 50×70 cm (extendable to 50×85 cm with optional feeder extension) Sheet Weight: 80 to 400 g.s.m. Programs: 20 programs with up to 20 operations each Iedpfx Asy Spaqjb Nsat Minimum Creasing Distance: 0.1 mm A4 Production (1 crease): up to 6,500 sheets per hour Power Supply: 230 V, 50 Hz, single-phase Power Requirement: 2 kW Net Weight: 180 kg Dimensions: 150 x 75 x 120 cm

Condition: ready for operation (used), Year of construction: 2006, Twelve dosing systems with volumetric progressive cavity pumps ViscoTec (Z and L versions) with collection hopper are available. Dosing volume range: 7.5ml/rev, flow rate range: 75ml/min-937.5ml/min, dosing accuracy: +/-1%, max. speed: 125rpm, max. dosing pressure: 30bar, max. inlet pressure: 10bar. Documentation available. An on-site inspection is possible. Iaodoy S A N Sepfx Ab Njt