Used Fortuna Semi-Automatic for sale (25,873)

Condition: new, The SPECIAL 411 MS MACC is a semi-automatic band sawing machine for the cutting of solid bars and profiles of small dimensions, with high efficiency and excellent precision. Dcodefh R Tyepfx Ad Njg The robust structure gives the machine the necessary rigidity and precision to the cutting unit. The belt drive is equipped with a two-speed motor and the special gearbox complete with gear is in bronze with the worm screw hardened and ground. The flywheels are suitably sized and the belt guides are sturdy and made with watertight invitation bearings and adjustable widia plates. The electromechanical microswitch control can be used to tension the belt with the rotation of the blade. Equipped with an accident prevention safety device on the flywheel cover and on the blade, the machine is completed by a swivel table to support the material and the vice with the rapid approach device. Functioning. Start the cutting cycle using the start button, the machine: 1. closes the vice and drives the belt motor 2. make the arch descend for the cut 3. the bow returns to the starting position 4. stop the belt motor 5. open the vice Possibility of manual cutting Cutting speed (m/min) 38-77 Cutting thickness (mm) 1.2 Cutting range From 45 sx 60° dx Stop for cuts of the same size Adjustable Electropump for belt cooling 0.06 kW

Condition: new, Used MACC 320 MS Semi-automatic sawing machine Good New " CE " Data sheet attached. Ready for delivery unless sold The basic characteristics of the machine (stiffness of the blade support, flywheel sizing, belt guides, belt tensioning) have been carefully studied to avoid the belt yielding, increase the duration, improve the linearity and the cutting time. Vertical rotation on pivot with adjustable conical bearings without backlash. Dodpfxofibfao Ad Njcg Belt drive with two-speed motor and special reducer with bronze gear and hardened and ground worm screw. Appropriately sized flywheels. Sturdy belt guides with watertight bearings and adjustable widia plates. Tensioning of the band obtained by means of an electromechanical device with blade rotation microswitch control. Accident prevention safety device on the flywheel cover, on the control knob and on the blade. Cutting thickness 1,2 mm Cutting range from 0 to 60° right Adjustable stop for cuts of the same size 0.06 kW electric pump for belt cooling Operation: start of the cutting cycle by start button, the machine: 1. closes the vice and drives the band motor 2. lowers the arc for cutting 3. the bow returns to the starting position 4. stops the band motor 5. opens the vice Possibility of manual cutting ACCESSORIES ON REQUEST : SINGLE-PHASE motor 69 m/1′ Speed variator from

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium size with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt drive with two-speed motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control Dcedpfx Adofibd Te Nsg Accident prevention safety device on the flywheel cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Adjustable stop for cuts of the same size Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Jaw height 200 mm Clamp jaw length 185 mm Worktop height 760 mm Machine weight 820 kg

Condition: new, Semi-automatic band sawing machine for cutting solid bars and profiles of medium and large dimensions with high efficiency and excellent cutting precision. The robust structure gives the machine the necessary rigidity and precision to the cutting unit. Belt control with inverter driven motor and special gearbox with bronze gear and hardened and ground worm screw. Suitably dimensioned flywheels Sturdy ribbon guides made with watertight invitation bearings and adjustable widia plates Belt tension obtained by means of an electromechanical device with microswitch blade rotation control. Accident prevention safety device on the fly cover cover and on the blade Cutting thickness 1.5 mm Cutting range 60°sx 60°dx Dodpfsfh R Tuex Ad Njcg Brush belt cleaning device Hydraulic power unit motor 0,37 kW 0.09 kW electric pump for belt refrigeration Clamp jaw height 250 mm Jaw length 200 mm Worktop height 760 mm Machine weight 1250 kg 12260 N

Year of construction: 1997, condition: excellent (used), A used very good condition cold circular saw from EISELE equipped with 370mm circular saw blade, infinitely variable hydro-pneumatic feed, pneumatic material clamping, coolant device and documentation. Speed: 17/ 34 rpm Cutting range: Round 90°/ 45° r. l./ 30° r. 130/ 130/ 105mm. square 90°/ 45° r. l./ 30° r. 120x120/ 100x100/ 90x90mm rectangle 90°/ 45° r. li/ 30° r. 200x100/ 140x100/ 100/100mm Dcedpfx Adskfp D To Nog Pneumatic connection 7 bar working height 900mm Machine dimensions WxDxH 865x1332x2175mm Weight 460kg Further tech. Data see pdf. document Tech. Data and dimensions: Errors excepted

Condition: new, Year of construction: 2022, IN STOCK -- Semi-automatic metal bandsaw machine with high cutting precision! With this machine, miter cuts up to 45° on the left and up to 30° on the right are possible (swivel range 45° on the left and 60° on the right) Technical data: ● Cutting range: - 90° round: 280 mm / square: 240 mm / rectangular: 420 x 200 mm - 45° right round: 260 mm / square: 240 mm / rectangular: 260 x 200 mm - 30° right round: 170 mm / square: 160 mm / rectangular: 160 x 160 mm - 45° left round: 200 mm / square: 180 mm / rectangular: 250 x 100 mm ● Drive power: 0,9-1,5 kW / 400 V / 50 Hz ● Band saw speed: 35 / 70 m/min ● Saw blade dimensions: 3270 x 27 x 0,9 mm Basic equipment: ● Hydraulic control of the saw frame ● Automatic height limitation of the saw frame via contact sensors ● Easy and convenient clamping of the material via a hydraulic short-stroke cylinder ● Hydraulic cutting pressure regulation ● Simple, continuous adjustment of the saw for miter cuts Dcjdpfxomf T Hpj Ad Neg ● Electrical blade tension monitoring with saw blade breakage control

Condition: as good as new (ex-display), Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! CAN SHARPEN MAX 406MM DIAMETER CUTTERS !!! The G-716 Semi-automatic Cutterhead Grinder is used to sharpen 178mm to 406mm diameter eased edge, milled to pattern, and fingerjoint cutterheads. Worktable traversing is automatic and has adjustable stops. Cutterhead indexing is manual. Each knife is held against a positive stop while being ground !!! No Index Plate To Change No index plate to change when working with heads with different numbers of knives. The use of an index plate assumes that the knives and head separations are uniform throughout, which is often not the case. If the height of the knife is high or low, then the front face of the knife will vary from knife to knife making the task of grinding difficult. The one constant is the back face of the knife, therefore the use of an indexing stop against the back face will provide for accurate indexing regardless of the irregularities in the knives and head slots. Head Indexing and Wheel Feed: Manual Minimum / Maximum Diameter Cutterhead: 7″ Min./16″Max. 178mm Min./ 406mm Max. Worktable Feed: Air / Oil Travel (maximum): 12″ 305mm. Adjustable Limits: Proximity Switch Speed: Dsdpfxeq Dzi Te Ad Njcg Fully Adjustable Index Method: Manual index after each knife is ground. Grinding Spindle: 1-1/2 HP Wash Down Duty TEFC Motor 3600 RPM, Dual ABEC 7 Precision Bearings, with Sealed Lubrication. 8″ (203mm)Diameter Grinding Wheel (9″ 229mm Diameter Max.) Coolant System: 15 Gallon Tank with Casters, Sediment Tray Full View Sight Glass, 5 GPM Pump (120VAC) Wash Down Hose Included Specifications Grinds 7″ to 16″ diameter eased edge, milled to pattern, and finger joint heads Automatic traversing worktable with adjustable travel limits Manual indexing of knives against a positive stop with grinding position pneumatic brake allowing precision indexing without the need of an index plate High precision 1-1/2 HP grinding spindle with sealed lubrication Recirculating adjustable flow flooded coolant system with wash down hose Fully enclosed grinding chamber with viewing windows and task light Grinding wheel feed allows unattended operation. New Proscale.

Condition: used, Year of construction: 2015, functionality: unexamined, For sale: Semi-automatic capsule filling machine for capsule production. Currently set up for size 0 capsules, complete with a vacuum pump. Also included is a semi-automatic capsule counter that automatically counts out the set quantity of capsules while packaging is being placed. (Both machines are being sold together as an inseparable package.) The equipment has seen very little use (only for production testing) and has been stored in a warehouse for many years. I cannot fully guarantee the technical condition of the capsule filler; however, when connected to power, all motors run properly, but a full technical inspection is recommended. The capsule counter has been checked and operates correctly, quickly counting the specified quantity (in multiples of 5 pieces). Details below: Capsule Filler: Manufacturer: Minsheng Pharmaceutical Machinery Co. Ltd Model: DJ-C Semi-automatic capsule filling machine Year of manufacture: 2015-7 Country of production: China Output: up to 10,000–25,000 capsules/h Machine weight: 330 kg Power supply: 400V 50Hz (3-phase) Power: 3.1 kW Manufacturer warranty period: out of warranty Availability: ready for pickup (to be confirmed) Dimensions: 135x70x160 cm Dcodpsw D Et Djfx Ad Njg Note: The capsule filler has visible dents on the housing (see photos) caused during transport, but the working elements are not damaged. Capsule Counter: Manufacturer: Minsheng Pharmaceutical Machinery Co. Ltd Model: HA-1 Capsule counting and filling machine Year of manufacture: 2015-7 Country of production: China Output: up to 10,000–25,000 capsules/h Machine weight: 330 kg Power supply: 220V 50Hz (1-phase) Power: 60 W Manufacturer warranty period: out of warranty Availability: ready for pickup (to be confirmed) Dimensions: approx. 150x70x50 cm The listed price is net. A VAT invoice is issued. For EU companies, 0% VAT for intra-Community supply. Assistance in organizing transport to the customer is possible. This is a courtesy listing; price and availability to be finally confirmed. The equipment is CE-marked (no manual or other documentation is included). We reserve the right to amend or withdraw the listing at any time without notice. This listing does not constitute a commercial offer as understood by commercial law.

Condition: new, Year of construction: 2025, power: 7.5 kW (10.20 HP), cutting height (max.): 700 mm, cutting width (max.): 1,100 mm, cutting speed: 80 mm/min, warranty duration: 24 months, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 24 MONTHS MECHANICAL - 12 MONTHS ELECTRICAL ROUND MAXIMUM DIAMETER: 700MM RECTANGULAR MAXIMUM DIAMETER: 700X1100MM SQUARE MAXIMUM DIAMETER: 700X700MM Dsdpfjvzh Duex Ad Njcg STANDARD MOTOR DRIVEN TABLE COLUMN TYPE SEMI-AUTOMATIC VARIABLE SPEED CONTROL PRECISION HEAD LANDING SYSTEM ASK FOR A QUOTE FOR MORE DETAILS.

Year of construction: 2025, condition: new, ECOSPIR TS These are very robust and largely maintenance-free machines that not only impress with their external design, but also with their sophisticated and well-thought-out technology. Dsdpehfdf Eofx Ad Nscg Technical specifications: • Operation via TOUCH SCREEN • Storage of 8 wrapping programs • Turntable diameter 1500 mm • Turntable permanent load 1200 kg • Pallet height max. 2200 mm • Connection value 240 V, 50 Hz 1.5 KW • Speed of the film carriage • Adjustment of foot and head wraps • Cross windings / spiral one-way winding • Height detection by photocell • can wrap black products or stretch film (optional) • CE marked machine Warranty: 24 months (single-shift operation),

Year of construction: 2025, condition: as good as new (ex-display), ECOSPIR EV These are very robust and largely maintenance-free machines that not only impress with their external design, but also with their sophisticated and well-thought-out technology. Technical specifications: • Operation via TOUCH SCREEN • Storage of 8 wrapping programs • Turntable diameter 1650 mm • Turntable permanent load 2000 kg • Pallet height max. 2200 mm • Connection value 240 V, 50 Hz 1 KW • CE marked machine Warranty: 24 months (single-shift operation), Dcodpfjmt Du Nox Ad Njg Options: Ramp for pallet truck & electric ant (Price on request)

Year of construction: 2025, condition: new, ECOSPIR EV These are very robust and largely maintenance-free machines that not only impress with their external design, but also with their sophisticated and well-thought-out technology. Technical specifications: • Operation via TOUCH SCREEN • Storage of 8 wrapping programs • Turntable diameter 1500 mm • Turntable permanent load 2000 kg • Pallet height max. 2200 mm • Connection value 240 V, 50 Hz 1 KW • CE marked machine Dcedshfdc Ropfx Ad Nsg Warranty: 24 months (single-shift operation),

Condition: new, Year of construction: 2025, power: 7.5 kW (10.20 HP), cutting height (max.): 1,100 mm, cutting width (max.): 1,600 mm, warranty duration: 12 months, STANDARD FEATURES - INDEPENDENTLY MOVABLE DOUBLE HYDRAULIC VICE - LINEAR FAST DOWN SYSTEM - VARIABLE RIBBON SPEED CONTROL - VARIABLE HEAD DOWN SPEED CONTROL - HYDRAULIC RIBBON TENSION SYSTEM - TABLE DRIVE SYSTEM - SAFETY SWITCHES - CHIP CONVEYOR - MOTORIZED CHIP BRUSH - 1 BAND SAW BLADE - 24 MONTHS MECHANICAL 12 MONTHS ELECTRICAL WARRANTY - COUNTRY OF ORIGIN TURKEY Dcedpfovvcp Uox Ad Nog TECHNICAL SPECIFICATIONS CAPACITY ROUND (MM) 1100 CAPACITY SQUARE (MM) 1100X1100 CAPACITY RECTANGULAR (MM) 1100X1600 SAW SIZE (MM) 67X1.6X11630 SAW SPEED (M/MIN) 20 – 80 MAIN MOTOR (KW) 7.5 HYDRAULIC MOTOR (KW) 1.5 ABSORBENT PUMP (KW) 0.09 VOLTAGE (V) 380 FREQUENCY (HZ) 50 WORKING HEIGHT (MM) 535 MACHINE DIMENSIONS (MM) 5390X1760X2875 WEIGHT (KG) 8000 WE PRODUCE ANGLED AND STRAIGHT CUTTING MODELS UP TO 220MM – 3000MM MORE CONTACT US FOR MORE INFORMATION

Condition: new, Year of construction: 2025, power: 11 kW (14.96 HP), cutting height (max.): 1,500 mm, cutting width (max.): 2,500 mm, warranty duration: 12 months, STANDARD FEATURES - INDEPENDENTLY MOVABLE DOUBLE HYDRAULIC VICE - LINEAR FAST DOWN SYSTEM - VARIABLE RIBBON SPEED CONTROL - VARIABLE HEAD DOWN SPEED CONTROL - HYDRAULIC RIBBON TENSION SYSTEM - TABLE DRIVE SYSTEM - SAFETY SWITCHES Dedpfxevvcpzj Ad Nocg - CHIP CONVEYOR - MOTORIZED CHIP BRUSH - 1 BAND SAW BLADE - 24 MONTHS MECHANICAL 12 MONTHS ELECTRICAL WARRANTY - COUNTRY OF ORIGIN TURKEY TECHNICAL SPECIFICATIONS CAPACITY ROUND (MM) 1500 CAPACITY SQUARE (MM) 1500X1500 CAPACITY RECTANGULAR (MM) 1500X2500 SAW SIZE (MM) 80X1.6X15650 SAW SPEED (M/MIN) 20 – 80 MAIN MOTOR (KW) 11 HYDRAULIC MOTOR (KW) 2.2 ABSORBENT PUMP (KW) 0.09 VOLTAGE (V) 380 FREQUENCY (HZ) 50 WORKING HEIGHT (MM) 600 MACHINE DIMENSIONS (MM) 7500X2150X3440 WEIGHT (KG) 21000 WE PRODUCE ANGLED AND STRAIGHT CUTTING MODELS UP TO 220MM – 3000MM MORE CONTACT US FOR MORE INFORMATION

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-technology, high-efficiency, high-safety saw. X45 is an advanced high-accuracy up-cut saw for small-profile cutting of straight or mitered aluminium parts up to ±85°. Two-hand button-press cutting with full saw guarding (including tunnels on each side) preventing access to the cutting area. Category 3 safety design with a dual-channel safety relay and a reset button. Electronically settable up-stroke point to any position (without a sensor) for shortest cutting distance. Advanced chip collection design with up to 94% chip collection efficiency and up to 8× less chips to clean from your saw / floor compared to traditional saws. • Ø450 mm TCT saw blade with powerful 3.0 kW drive motor • Ergonomic usage design with blade changed from the front of the machine • AS / NZS 4024:2014 Category 3 safety standard, with safety relay and two-hand cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • Electronic lockout of the blade / machinery panels preventing access to rotating assemblies also during spin-down. • Safety switch detection of opening of the access panels triggering an e-stop. • 2× vertical and 2× horizontal clamps with adjustable clamp pressures. • Adjustable saw mitre angle to ±85° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light Dodev Iccfjpfx Ad Nscg • 2× Ø100 mm points for chip collection • Optional 3.8 kW vacuum chip extractor

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the aluminium profiles you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. Dedemb U Tuepfx Ad Necg High-speed aluminium processing with precision PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø700 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Bulk aluminium manufacture • Mitered aluminium structures manufacture • Windows and doors manufacture • Blinds, shades and furniture manufacture • Fabricated aluminium structures manufacture • Aluminium facades manufacture

Condition: new, Year of construction: 2026, Skyrocket your steel cutting productivity and eliminate strenuous labour associated with steel cutting with a semi-automatic saw based on precision servo-motor actuation. Automatic detection of the material placed to cut with the machine setting itself to the shortest cutting stroke needed without you needing to adjust any limit sensors. Automatic detection of saw motor overload and reverse to alleviate. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø400 mm HSS blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Semi-automatic cutting with adjustable saw feed rate and blade RPM (20-100) • Spindle and drive unit immersed in oil solution for smooth performance and long service life • Mitering locking device stops at 45° left straight 90° and 45° right • Industrial ball-screw actuator with servo motor control of the saw stroke • Auto-detect of the material size results in short stroke & cut times without user input • Saw overload detection with feed modulation • Fully integrated flood coolant system • Every new unit comes with brand new HSS blade for ferrous cutting • Optional AS / NZS 4024:2014 safety guard with tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on press of a button • Safety switch disabling the saw operation when guard it up Dsdpemcbk Rjfx Ad Nscg Highly suitable for: • Steel fabrications manufacture • Agricultural manufacture • Caravans and trailers manufacture • Doors and gates manufacture • Retail steel sales

Condition: new, Year of construction: 2026, Supercharge your aluminium cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the aluminium size you may need to cut. Suitable for bundle-cutting many profiles at once and with high-precision. High-speed aluminium processing with precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Dcodemb U Tfjpfx Ad Neg Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: new, Year of construction: 2026, Upgrade your aluminium production to a high-speed, high-safety, OHS compliant saw. Djdemb U Tbepfx Ad Nscg A420 is a simple to use saw for small-profile cutting of straight or mitered aluminium parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Spray-mist blade lubrication system • Air gun and LED interior light • Ø100 mm attachment point for chip collection • Optional 2.2 kW vacuum chip extractor Highly suitable for: • Windows and doors manufacture • Commercial office manufacture • Data centres manufacture • Linear lighting manufacture • Blinds and shades manufacture • Composites manufacture

Condition: new, Year of construction: 2026, Do you cut hardened or stainless steels on a cheap abrasive saw? Upgrade your production to a high-safety, PLC controlled, industrial hot saw. Dodomcbk Uopfx Ad Nscg S200 is a semi-automatic abrasive (hot) cutting system designed for cutting stainless and hardened steels, as well as matrix-type materials like rubbers, threads, carbon fibre, which require high RPM cutting. Suitable for single or (bundled) multiple tubes cutting at once. Full pneumatic liftable guard (including tunnels 900 mm either side) preventing saw access and safely capturing all sparks from the cutting process. Opening and closing of the guard with a press of a button for a full unimpeded saw table access with safety switch disabling the saw on lifting of the guard. Saw cooling by forced air circulation and convection design. Optional vacuum extraction system for dust collection. • Ø200 mm abrasive cutting disc with 1.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • Precision machined and balanced high-RPM spindle and drive unit • Precision 90° cuts with smooth performance and long service life. • 2x vertical clamps with adjustable clamp pressure • Adjustable feed control of up / down cutting cycle. • Rapid blade changeover system minimising time. • Air gun and LED interior light • 1× Ø100 mm attachment points for dust collection • Optional 2.2 kW vacuum extractor Highly suitable for: • Stainless and hardened steels manufacture • Hydraulic tubing manufacture • Composite / matrix materials manufacture • Carbon fibre manufacture • Fiberglass manufacture

Condition: new, Year of construction: 2026, Upgrade your timber production to a high-safety, OHS compliant saw. A420 is a simple to use saw for high-speed cutting of softwood in straight or mitered parts (up to ±75°). High-safety operation with a two-hand press cutting and full saw guarding (including 900 mm tunnels each side) preventing access to the saw as well as uncontrolled offcuts ejection. Pneumatic liftable guard opening and closing with a press of a button. Safety switch disabling the saw on guard up. • Ø420 mm TCT saw blade with 2.2 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards with safety tunnels 900 mm each side of the saw • Safety guard liftable on a press of a button for unimpeded saw table access • Safety switch disabling the saw operation on guard up • 2× vertical and 2× horizontal clamps with adjustable clamp pressure • Adjustable saw mitre angle to ±75° • Moveable back fence for increased cutting capacity • Air gun and LED interior light • Ø100 mm attachment point for chip collection Dcjdomb U T Hepfx Ad Nsg • Optional 2.2 kW vacuum dust extractor Highly suitable for: • Planters and boxes manufacture • Light timber manufacture • Decorative manufacture • Woodcraft manufacture • Furniture manufacture

Condition: new, Year of construction: 2026, High-speed timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table, and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.5 sec for a complete up-down saw motion. • Ø460 mm TCT blade with 5.5 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guards 300mm on each side of saw blade • Adjustable T-clamp with adjustable saw up-down cutting feed rate • Flat precision ground table, assuring cutting accuracy • 3x 100mm dust extraction outlets Dsdpfemcaahex Ad Necg • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 120-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914mm diameter blade models Highly suitable for: • Frame and truss manufacture • Pallets manufacture • Windows and doors manufacture • Furniture manufacture • Bulk timber cutting

Condition: new, Year of construction: 2026, Supercharge your timber cutting productivity with one of the most flexible, large-capacity saws around. A550 is designed for high mitre angle cutting with a huge ±75º saw mitre range supported by a large capacity blade to provide genuine high-angle cutting capability but without compromising on the timber size you may need to cut. Suitable for bundle-cutting many timbers at once and with high precision. High-speed timber processing with high-powered motor and precision PLC controlled motion. Pneumatic-actuated safety guard opening and closing with a press of a button for full unimpeded saw table access. Safety switch disabling of the saw on guard up. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW dust vacuum extractor • Optional automated mitre control system Highly suitable for: • Frame and truss manufacture • Sheds manufacture • Furniture manufacture • Mitre timber structures manufacture • Bulk timber cutting Dcsdpfx Aomb U T Rjd Nsg

Condition: new, Year of construction: 2026, No matter what job you need to cut A700 is the only saw you will ever need. With the largest capacity in its class and massive ±75º mitre angle range capability, it is designed for genuine high mitre angle cutting without compromising on the size of the timber you may need to cut. Suitable for bundle-cutting many timbers at once and with high-precision. High-precision timber processing with PLC controlled motion. Pneumatic actuated safety guard, opening and closing with a press of a button for a full unimpeded saw table access. Safety switch disabling the saw on lifting of the guard. Optional CNC controlled saw mitre angle positioning with touch-pad screen control. Dodpfx Adjmb U T Us Njcg • Ø550 mm TCT saw blade with 4 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation • Overhead safety guard with safety tunnels 900 mm each side of the saw • Safety guard pneumatically liftable on a press of a button • Safety switch disabling the saw operation on guard up • 2x vertical and optional 2x horizontal clamps with adjustable clamp pressure • Mitre angle ±75° with pin locating at 0°, ±15°, ±22.5°, ±30°, ±45°, ±60°, ±75° • Spray-mist blade lubrication system • Air gun and LED interior light • 2× Ø100 mm attachment points for chip collection • Optional 2.2 kW chip vacuum extractor • Optional automated mitre control system Highly suitable for: • Windows and doors manufacture • Mitered aluminium structures manufacture • Aluminium fabricated structures manufacture • Composites manufacture • Blinds, shades and furniture manufacture • Aluminium retail sales

Condition: new, Year of construction: 2026, High-capacity timber processing with high-powered motor and PLC controlled motion. Solid steel construction with machined saw table and high-power induction motor to cut through hardwood with ease. Hyper-fast cutting capable with up to 0.8 sec for a complete up-down saw motion. • Ø600 mm TCT blade with 11 kW drive motor • AS / NZS 4024:2014 safety standard, two hand press cut operation Dcedjmcaawjpfx Ad Njg • Overhead safety guards 600 mm on each side of the saw blade • Flat precision ground table, assuring cutting accuracy • Adjustable T-clamp, for material height variation • 3x 100mm dust extraction outlets • Fully enclosed blade housing • Spindle lock for easy blade removal • TCT 160-tooth saw blade included • Available in either right or left hand configuration to suit work flow • Also available 455, 600, 762 and 914 mm diameter blade models Highly suitable for: • Retail timber sales • Doors manufacture • Pallets manufacture • Furniture manufacture • Bulk timber cutting