Used Fronteq Flwp 7.5 for sale (2,343)

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs Lodpfx Ajyug Hxsiijhg • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: new, Year of construction: 2019, functionality: fully functional, cooling capacity: 157.5 kW (214.14 HP), type of input current: three-phase, type of cooling: water, overall weight: 820 kg, input voltage: 400 V, total width: 1,000 mm, total length: 1,600 mm, total height: 1,950 mm, warranty duration: 6 months, heating capacity: 175 kW (237.93 HP), Watercooled chiller/Heat pump Climaveneta NX W Y H 0502 157.5 kW/175 kW Cooling capacity: 157.5 kW / 44.78 tons (12/7 — 35°C) Heating capacity: 175 kW / 49.76 tons (40/45 —7°C) Year of manufacture: 2019 Options: Heat pump Refrigerant circuit: 1 pcs. Heat exchanger: Plate Compressors: 2 pcs. Bitzer GSD80295VLB4-2 (scroll) Type of refrigerant: R454B Dimensions: 1.6x1x1.95 m Weight: 820 kg Working hours: 59/80 h. Lhodpfx Aov Nkbxoiiog Condition: Outlet CONDITION, TESTING & READINESS The chiller / kaltwassersatz / undergoes seven stages of technical inspection and operational parameter verification. It is also tested at our own test station, with connection to water (or glycol) and adjustment of parameters according to your requirements. After testing, you will receive a detailed report with the operating performance and the overall condition of the chiller. The chiller / kaltwassersatz / is ready for transport and commissioning. Our engineers will assist you with cooling capacity calculations, selection of the appropriate cooling scheme, and configuration of the required equipment options. WARRANTY & SUPPORT The quality of the equipment is confirmed with a warranty ranging from 6 to 36 months. LOGISTICS - Worldwide delivery available - Support with loading, export documentation, and logistics coordination Get a detailed consultation. Photos, videos, and a full testing report can be provided immediately upon request.

Condition: good (used), Tires with rim, trailer tires, heavy-duty tires, heavy-duty wheels, forklift tires -Manufacturer: Bridgestone, J-Lug tire with inner tube -Tire size: 7.50-15 -Quantity: 1 tire available Ledpfxjyx S Taj Aiiehg -Dimensions: Ø 775 x 185 mm -Weight: 37 kg

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 7,500 kg, total length: 3,134 mm, total width: 1,738 mm, type of input current: three-phase, rotary table diameter: 1,200 mm, overall weight: 3,000 kg, height adjustment type: hydraulic, torque: 6,350 Nm, welding current (max.): 600 A, warranty duration: 12 months, Equipment: foot remote control, Hydraulically height-adjustable rotary tilting table Maximum load: 7,500 kg Face plate diameter: 1,200 mm Lhodjt Hfrcspfx Aiiog Height of faceplate: 900mm-2,084 hydraulic Height of 90° tilted faceplate: 710mm-1,894mm Tilting range: 135° hydraulic Faceplate speed: 0.04-1 rpm electromotive Operation: Manual remote control and two-pedal foot switch

Condition: good (used), Year of construction: 2020, Geared motor, electric motor, electric geared motor, spur geared motor -Type: LR87/D132S4/47.58/M1/270 i 47.58 with forced cooling fan -Speed: 30.47 rpm -Power: 5.5 kW Lodpfx Aijyug E Isiohg -Shaft: Ø 50 x 100 mm -Design: B3 -Protection rating: IP54 -Quantity: 1 piece available -Price: per piece -Dimensions: 885/320/H300 mm -Weight: 115 kg

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, pressing force: 962 t, stroke length: 200 mm, table width: 1,400 mm, table length: 2,750 mm, working width: 1,400 mm, operating temperature: 135 °C, operating pressure: 290 bar, workpiece height (max.): 200 mm, workpiece weight (max.): 250 kg, cylinder diameter: 270 mm, opening width: 200 mm, plate width: 1,400 mm, pressure: 25 bar, temperature: 150 °C, We are offering this used ITALPRESSE MARK C/ 14-27.5/2 veneer press, year of manufacture 2014. Machine type: MARK/C 14-27.5/2 Serial number: 184450514 Rated voltage: 400 V Frequency: 50 Hz Year of manufacture: 2014 Single-level through-feed press system with top ram Machine is in perfect working condition Meets CE safety standards The machine can also be purchased together with other machines as part of a complete production line. Heating plate dimensions: 1400 x 2750 mm Number of heating plates: 2 units Number of levels: 1 unit Cylinder stroke: 200 mm Daylight opening: 200 mm Feed side: 1400 mm Specific pressure at 100%: 25 Kg/cm² Total pressing force: 9620 kN Cycle time: 2-30 min Operating temperature: 135°C Max. surface operating temperature: 150°C Intended heating medium: thermal oil Number of press cylinders: 6 units Diameter of press cylinders: 270 mm Return cylinders: 4 units Operating pressure: 290 bar Closing speed: 50 mm/sec Opening speed: 50 mm/sec Operating voltage: 400 V Mould data: External mould dimensions: 1340 x 2540 mm Max. mould weight: 250 kg Mould cover dimensions: 1200 x 2400 mm Moulds are not included in this offer but can be supplied at additional cost Lhjdpfxsyxp Twj Aiijg Powered infeed roller conveyors: Dimensions: 1400 x 3500 mm Feed speed: 8-40 m/min Light barrier control Electropneumatic shaking device for the upper Mylar film Electronic flatness control Automatic switching to pressing speed Compressed air equipment in the lower press table Cylinder support plates are insulated and drilled from solid material for water cooling Feed speed with frequency control Powered outfeed roller conveyors, dimensions: 1400 x 3500 mm Electrical control cabinet / Siemens S7 PLC control panel Dismantling and collection at buyer’s own expense Pick-up location: A-8265 Kroisbach an der Feistritz If you have any questions or require further information, please send us a message or give us a call.

Condition: used, Berriola / Yaskawa Electric CIMR-MTIII-7.5K Varispeed Control Unit including drive plate YASKAWA JPAC-C342 Manufacturer number: CIMR-MTIII-7.5K Lhedpfsytycdsx Aiieg

Condition: new, Year of construction: 2023, total length: 6,700 mm, total width: 1,500 mm, total height: 2,950 mm, warranty duration: 12 months, overall weight: 2,200 kg, power: 12 kW (16.32 HP), Machine height : ~2.950 mm Machine width : ~1.500 mm Machine width with open doors : ~2.950mm Machine length : ~2.950 mm Table diameter : 1.200 mm Maximum work piece height : 500 mm Maximum table capacity : 500 kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 4'' Filter : PC2 (1.500m3/h) Total installed power : ~10,5 kW Application for sandblasting truck rims: YES Application for sandblasting pipes from 1’’(24mm) to 8’’(203mm) :YES This type of machine can be assembled before delivery, it takes just a day to prepare it for work. The machine is in stock. A test of the machine in our premises is possible with prior notice Ljdsvr Tbaepfx Aiishg

Year of construction: 2023, operating hours: 4 h, condition: new, machine/vehicle number: 017-2023, Machine height : ~2950mm Machine width : ~1500mm Machine width with open doors : ~2950mm Machine length : ~2950mm Table diameter : 1200mm Maximum work piece height : 500mm Maximum table capacity : 500kg Number of blast wheels : 1 x 7.5kW E-Eco Frequency inverter for turbine : 1 pcs Blasting time : Adjustable PLC : Siemens S7 1200 + TP 4'' Filter : PC2 (1.500m3/h) Total installed power : ~10,5kW Lhedpfxoi Dprns Aiisg This type of machine can be assembled before delivery, it takes just a day to prepare it for work. Machine is on stock.

Condition: used, fuel type: diesel, fuel: diesel, Year of construction: 2022, operating hours: 509 h, Doosan 77.55 Compressor – 3000 rpm – 8.6 bar – 35.5 kW – Weight 750 kg – 509 operating hours = Additional Information = Lsdpfxsyrigve Aiiohg Year of manufacture: 2022 Intended use: Construction Contact Miguel Cubas for further information. = Company Details = We are located between Antwerp and Brussels along the A12 motorway, close to the port of Antwerp. Opening hours: Monday to Friday, continuously from 8:30 am to 7:00 pm.

Condition: ready for operation (used), Year of construction: 2018, number of axes: 3, This 3-axis Coord3 ARES NT-L 10.7.5 CNC was manufactured in 2018. It features a high-precision RENISHAW PH20 motorized indexing probe head, RENISHAW UCC controller, and a robust aluminum alloy frame. The machine includes a black granite worktable with threaded holes for secure workpiece fixation. Ideal for detailed 3D measurements with a maximum speed of 500 mm/sec and acceleration of 1700 mm/sec². Contact us for further details regarding this machine. Additional equipment • Air-cooled drying system • CE compliance certification • Equipped with an air filter and regulator system • High-precision RSF optical scales and sensors Machine Benefits Technical Machine Benefits Lsdpfx Aisyaiz Neijhg • Air cushion bearings for structure support and increased measurement accuracy • Pneumatic counterbalance for the vertical probe holder • Automatic fall protection for head in case of air outage • All geometric and measurement checks executed under stable temperature conditions (20°c) as per iso 10360/2 standards • Resolution: 0. 0001 mm • Measurement accuracy: iso 10360/2 mpee = 2. 1 + 3. 0l/1000 μm • Maximum speed in 3d measurement: 500 mm/sec • Acceleration in 3d measurement: 1700 mm/sec² Extra Information Control Unit RENISHAW UCC controller kit TouchDMIS measurement software DELL AIO computer with 24” LCD TouchScreen monitor Tools RENISHAW PH20 motorized probe head 3 RENISHAW TP20 magnetic probe modules RENISHAW TCR20 probe changer RENISHAW 23-piece stylus kit 25 mm diameter ceramic calibration sphere with certification Mount Position (Assembly) Machine frame made from aluminum alloy Slide surfaces hardened with a special process Black granite worktable with high wear resistance and threaded holes

Condition: new, axle configuration: > 3 axles, Year of construction: 2026, Further information here: Lhedpfx Ajv D Abmsiijg

Condition: new, maximum load weight: 44,000 kg, overall weight: 61,000 kg, axle configuration: 3 axles, Year of construction: 2026, Further information here: Lhjdov D Abtepfx Aiijg

Condition: new, overall weight: 49,500 kg, axle configuration: 3 axles, Year of construction: 2026, 3-axle MULTIMAX PLUS low-bed semi-trailer, air-suspended and hydraulically forced-steered axles. Technical Data MultiPLUS-Z-3L-UB-12AT-9.60-17.5-2.54-GR Speed: 80 km/h Legal Gross vehicle weight: 49,500 kg / 31,500 kg Fifth-wheel load: 18,000 kg Axle load: 31,500 kg / 31,500 kg Gooseneck length approx.: 3,900 mm Gooseneck width approx.: 2,480 mm King pin trailing radius (rearwards) approx.: 2,100 mm Saddle height loaded approx.: 1,205 mm Loading platform length approx.: 9,600 mm Extendable by approx.: ? Loading platform width approx.: 2,540 mm Lodpfx Ajizu Ntoiijhg Loading height at max. load approx.: 890 mm Suspension travel approx.: -55/+145 mm Axle spacing: 1,360 mm Gross vehicle weight depending on fifth-wheel load: Yes Special permit is required for exceeding country-specific regulations. Technical Description Gooseneck: Gooseneck in SNT Design for optimized loading platform length, length approx. 3,900 mm, rear with chamfer approx. 1,000 mm x 6°. Technical fifth-wheel load: 18,000 kg. For tractor units: 4 x 2 and 6 x 2. Loading platform: Loading platform, length approx. 9,600 mm with rear chamfer approx. 900 mm x 6°. Loading platform behind the gooseneck hydraulically raisable and lowerable, length approx. 3,000 mm, loadable up to approx. 9,000 kg. Ramps: DR-10-900-4920-GR-HV-AXS A pair of two-part AXS steel ramps approx. 4,920 mm long and approx. 900 mm wide. Open grating surface. Hydraulically folding ramp tips. Ramps can be hydraulically shifted individually by approx. 235 mm outwards and approx. 365 mm inwards. Maximum load capacity and approach angle per technical data sheet: C470319 Maximum ramp angle with lowered loading platform: 9° Axles and Suspension: BPW axles and suspension, all axles hydro-mechanically forced-steered. Technical axle load: 12,000 kg Air suspension with lift/lower valve. Axle tool kit. Tyres: 235/75 R 17.5 3PMSF twin tyres. Manufacturer of our choice Load index 143/141J (144/144F) Braking system: WABCO EBS-E braking system according to EU regulations. Without connecting cable to tractor unit. Lighting system: 24-volt lighting system in "ASPÖCK-NORDIK full LED" version as per EU regulations. (ASS 3) Metalizing: Complete HRM metalizing (High Resistance Metallisation) Complete steel structure shot blasted, then hot-finished with ZINACOR 850 (Zinc 85% - Aluminium 15%). Painting 6K final treatment: Complete steel structure shot blasted after welding. 1 coat zinc-based primer, 1 coat bonding primer. Final painting with 2 coats 2K (acrylic) single-colour in RAL shades of your choice, then cavity sealing with special wax. Rims in silver. Multi-colour and special painting at extra cost. Steel construction: Steel structure made of high-strength fine-grained steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa) Welders certified to DIN-EN 287-1. MAG welding process to EN ISO 4063. Protective gas M21 per EN ISO 14175 Front wall of steel, plug-in, approx. 400 mm high Connection board for supply lines to the tractor unit at the height of the outer frame profile. ASPÖCK-UNIBOX at the front plug connection board with sockets 24N, 24S & 15-pin. 24N connection according to ISO-1185 24S connection according to ISO-3731 15-pin connection according to ISO-12098 If your pin configuration deviates from the ISO standard, please inform us. “Anderson” socket at the front connection board. Rema 78051-00 & Amp. 150 V. Cable for supply to electro-hydraulic unit and/or electric winch (35 mm²,

Condition: good (used), Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer, industrial heavy-duty trailer -Manufacturer: AWI Maschinenbau, heavy-duty transport wagon with 1-axle turntable steering -Type: PDV 3.0 To 1.8x7.5 m -Platform: 7615/1800/H1000 mm -maximum weight allowed: 3 t -Tires: Solid rubber tires 415/100-305 -Overall dimensions: 9135/1860/H1000 mm Lhodpoyhaxnsfx Aiisg -Transport dimensions: 7615/1860/H1000 mm -Weight: 860 kg

Condition: good (used), Year of construction: 2010, The device has been well maintained. Comp. air Pmax: 13 bar Refr. Pmax High: 18.7 bar Electrical connection values: 230 V / 50Hz, Kw 1 Ph Lhjdpfx Aijvmqkhsieg Width: 460 mm Depth: 500 mm Height: 830 mm Weight: 60 kg

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: HAW07.5-2-22-T96, overall weight: 100 kg, total length: 600 mm, total width: 400 mm, total height: 900 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), operating pressure: 250 bar, Equipment: hydraulics, Hydraulic power packs from 1.1 to 22 KW output ⦁ Drive type electric motor - petrol engine - diesel engine or PTO driven ⦁ Hydraulic oil tank 36L - 96L - 144L - 250L or according to customer requirements ⦁ Hydraulic pump Gear pumps or axial piston pumps Lsdpfx Ast U Uiasiishg ⦁ Additional components such as valves and control technology ⦁ Tank size 36L - 96L - 144L - 250L or according to customer requirements (customer drawing)

Condition: used, Year of construction: 2007, machine/vehicle number: 001491U, For Sale Used single-girder overhead crane ± 7.550mm x 500 kg Lsdpfx Ajw I N T Uoiijhg

Condition: used, color: other, We have a stock of >100 axles. Please contact us if you can't find what you are looking for. Lhjdou At D Tspfx Aiiog

Year of construction: 2020, condition: used, Gear motor, electric motor, electric gear motor, flat gear motor Ljdpfx Aep Swvnoiiohg -Manufacturer: ZHE JIANG, geared motor type BRF37-YO.18-69.33-M1-I -Speed: 19 rpm -Engine: ZHE JIANG type YS 6324 -Power: 7.5 kW / 1330 rpm -Shaft: Ø 25 x 50 mm -Protection rating: IP 55 -Quantity: 2x geared motor available -Price per piece -Dimension: 430/190/H1800 mm -Weight: 18 kg/pc.

Condition: used, mileage: 608,100 km, power: 220 kW (299.12 HP), first registration: 01/2018, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, loading space length: 7,500 mm, loading space width: 2,450 mm, loading space height: 2,400 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, tail-lift, * Special equipment: * Refrigerated box body by STS * Movable partition wall * Aluminium floor * Two lashing rails each on right and left * Thermoking T1000 R electric/diesel refrigeration unit * Night power socket incl. cable for reefer power supply * BÄR tail lift with 2 t lifting capacity * Leather steering wheel * Lane keeping assist Lhodpfx Aiexafgteijg * Stability control assist * Attention assist * Active Brake Assist 5 * Adaptive cruise control * Reversing camera * Air conditioning * Low engine tunnel storage compartment * Over-windscreen storage with lid * Comfort package * 220 Ah battery * 24V/100 A electrical preparation in cab * 12-speed PowerShift transmission * Manual roof hatch (steel) * Heated fuel filter * 390 litre aluminium fuel tank * Enhanced engine brake * Reinforced engine compartment encapsulation * Wheelbase variant 5500 mm * Rear overhang 2400 mm * Acoustic reverse warning system (external sounder) * Tail lift control switch * Additional remote key * Fleet management system interface * Circuit breaker * 12V / 15A socket in passenger footwell * 24V socket in passenger footwell * Camera preparation * Additional water heater * Further equipment: * Emission standard EURO 6 * Front axle 8.0 t * Heated front-view mirror * Two-line trailer brake system * Tyres (front axle): 385/55R22.5 12/12 mm tread * Tyres (rear axle): 315/70R22.5 12-14 mm tread * Spare wheel * 24V / 15-pin trailer socket * Exhaust outlet to vehicle centre * Batteries positioned side by side * Rear axle differential lock * Compressed air connection in cab * Air unit with condensate monitoring * Driver assistance system: Attention Assist (fatigue sensor) * Driver assistance system: Autonomous emergency braking (Active Brake Assist) * Driver assistance system: Lane Keeping Assist * ClassicSpace cab, 2.30 m wide, 320 mm tunnel * Vehicle contour marker lights, LED * Suspension: leaf/air * Electric windows * Tinted windscreen * AdBlue tank: 60 litres * Central locking system * Air intake at front * Two-stage air compressor * Heated air dryer * Engine: 7.7 litre – 220 kW inline 6-cylinder diesel (OM 936) * Kerb view mirror * Disc brakes front and rear axles * Remote control key * LED flashing side marker lights * Cab seats: functional passenger seat * Front mudguards * 12V socket in passenger footwell * Tachograph / EU control device * Toll pre-equipment * Front axle drop type * Gross vehicle weight 18.00 t * and much more. * Subject to error, change and prior sale.

Condition: excellent (used), mileage: 310,824 km, power: 132 kW (179.47 HP), first registration: 03/2015, fuel type: diesel, axle configuration: 4x2, fuel: diesel, color: yellow, gearing type: automatic, emission class: euro6, Year of construction: 2015, Equipment: ABS, air conditioning, crane, cruise control, electric window regulation, fog lights, power mirror, soot filter, spoiler, = Additional Options and Accessories = - Low noise - Speed limiter - Air suspension - Air horn - Particulate filter - Stability control - Toolbox - Power take-off (PTO) = Additional Information = Axle configuration Front axle: steered Functional Mast: Telescopic (2 sections) Mast height: 9.5 m Lifting capacity: 990 kg Lifting height: 950 cm Crane: PALFINGER PK4200, year 2015, mounted behind cab Body brand: PALFINGER PK4200 CE marking: yes Condition Technical condition: very good Visual condition: very good RENAULT D7.5 180 4X2 + PALFINGER PK4200 CRANE Lhodpfxevl S Ulj Aiisg EURO 6 L PACKAGE 180 HP DRIVE 4X2 WHEELBASE 430 CM AIR SUSPENDED CAB WITH AIR CONDITIONING AND 3 SEATS AUTOMATIC TRANSMISSION TOOLBOX OPEN FLATBED PLATFORM WITH REMOVABLE ALUMINIUM SIDE WALLS LENGTH 485 CM WIDTH 230 CM LOAD FLOOR HEIGHT IN THE MIDDLE 85 CM!!! ALUMINIUM CHEQUERED PLATE FLOOR LASHING EYES PALFINGER PK 4200 CRANE 2X HYDRAULIC EXTENSION 2X OUTRIGGER SUPPORTS MAX LIFTING CAPACITY 990 KG MAX LIFTING CAPACITY AT 650 CM 550 KG MAX WORKING HEIGHT 950 CM EXTRA FUNCTION FOR ROTATOR ROTATOR FOLLOW US ON INSTAGRAM: GEURTSTRUCKS WIR SPRECHEN DEUTSCH HABLAMOS ESPANOL WE SPEAK ENGLISH

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 300 kg, volume flow: 60 m³/h, pressure (max.): 10 bar, tank capacity: 500 l, Equipment: documentation/manual, refrigerant dryer, type plate available, PROD. MARK TYPE MSM7.5D TM500 S/N ITJ874643 YEAR 2024 CAPACITY (kW) 7.5 OUTPUT (m3/min) 1 m3/min Lhjdpevrcucofx Aiijg CIS (bar) 10 BUILT-IN DEHUMIDIFIER YES ON 500L TANK DOCUMENTS YES NEW/USED NEW

Condition: good (used), Year of construction: 1978, hardness tester, hardness measuring machine, hardness tester, hardness tester, universal hardness testing machine -Manufacturer: Reicherter, hardness tester according to Brinell/Vickers and Rockwell on solid base -Type: Briviskop BVR 187.5 H -Projection: 250 mm -Test height: 280 mm -Accessories: see photos -Total dimensions: 1200/700/H1730 mm Lhsdpfxou Ha U Ts Aiieg -Weight: 256 kg

Condition: used, Year of construction: 2007, operating hours: 6,325 h, lifting height: 8,500 mm, fuel type: electric, mast type: triplex, battery manufacturer: Sunlight, battery capacity: 700 Ah, battery voltage: 48 V, fork length: 1,200 mm, color: other, Empty weight: 3.860 kg Battery: 700 Ah, 48 V, Year of manufacture 2016, Brand of battery Sunlight Lifting capacity: 1.600 kg Maximum passing height: 317 cm Fork carriage: Sideshifter Please contact Bas Sindorf for more information Lsdpfx Asv D Ehvjiishg