Used Gaser Enrobeuse Paneuse Practic-240 for sale (4,163)

Condition: good (used), Three-jaw chuck, three-jaw lathe chuck -Mouth size: Ø 240 mm -without: interchangeable jaws -Conical mounting type: Ø 102 mm Iiedpfjdq Tt Rex Ab Neb -Weight: 29 kg

Condition: good (used), Frequency converters, frequency converters, drive converters, controllers, inverters -Manufacturer: Siemens, Sinamics Power Module 240 Iodpfegcvnpox Ab Nsib -Input: 3 AC 380-480 V 31.5 A 50/60 Hz -Motor: IEC 7.5/11 kW -Dimensions: 340/190/H290 mm -Weight: 12.7 kg

Condition: used, Gratings, grating, light grilles, insert grilles, insert grilles, stair treads, safety steps, grating step, step -Grating step: 800 x 240 mm -Total height: 70 mm -Struts: wall thickness 2 mm -Bar height: 25/10 mm -Gratings: hot-dip galvanized Iedpfx Asrrzd Reb Nsib -Number: 1x grates available -Weight: 6kg

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers Iiodpfolug Swox Ab Njb -Transport roller: diameter 240 mm -Transport width: 750 mm -Shaft: Mounting Ø50 x 175 mm -Quantity: 1x transport roller available -Total dimensions: Ø 240 x 1100 mm -Weight: 82 kg/piece

Condition: used, fixed point, fixed center point, fixed Morse taper, fixed centering point, centering points -fixed centering point: Ø 240 mm Ijdpfx Ajrlpn Ujb Neib -Receptacle: Ø 40 mm -Dimensions: Ø 240 x 305 mm -Total weight: 21.4 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Manufacturer: Röhm, three-jaw chuck Chuck size Ø 240 mm -Passage: Ø 53 mm -Bolt circle: Ø 70 mm -Weight: 27 kg Ijdpfx Ash Szbdjb Nsib

Condition: good (used), Bezel, stick, lynette Ijdpfxsd S Iyus Ab Neib -max. passage: Ø 240 mm -Tip height: 290 mm -Edition: ball bearings -Technical drawing: in the photos -Dimensions: 760/130/H610 mm -Weight: 125 kg

Condition: used, Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams, lifting cylinders -Hydraulic cylinder: single-acting stroke 240 mm -Piston rod: Ø 130 mm Isdpspk Iqpofx Ab Nsib -Hole circle: Ø 205 x 14 mm -Dimensions: Ø 230 x 465 mm -Weight: 57 kg

Condition: used, fan, blower, fan wheel, cross-flow fan, cross-flow blower, cross-flow ventilator, roller fan -Fan blower cross-flow fan -Engine: EMI 105B-50110/3 -Voltage: 230V / 110/300 W / 1100 rpm Iodeunn H Eopfx Ab Neib -Fan wheel: both sides Ø 150 x 240 mm -Dimensions: 1040/220/H200 mm -Weight: 10 kg

Condition: used, rubber damper, engine damper, clutch, rubber coupling -Rubber coupling: rubber damper engine damper -Dimensions: see photos -Total dimensions: 240/210/H130 mm -Weight: 4.5 kg Iiedpfouzn Evsx Ab Nob

Condition: used, Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel Isdsmch U Repfx Ab Nsib -Manufacturer: SIEMENS, Operator Panel OP20/240-8 -Type:6AV6 542-0BB15-2AX0 -Dimension: 250/235/H45 mm -Weight: 1.1 kg

Condition: good (used), Conveyor belt rollers, transport rollers, replacement rollers, conveyor belt, roller conveyor, support rollers -Transport roller: diameter 240 mm -Transport width: 1150 mm -Shaft: Mounting Ø50 x 185 mm -Quantity: 1 piece available -Total dimensions: Ø 240 x 1520 mm -Weight: 88 kg Iodpfeltrfbex Ab Neib

Condition: used, Electric motor, three-phase motor -Voltage: 240/415 V -Power: 0.12 kW -Speed: 680 rpm -Shaft: Ø 15 x 85 mm -Construction: B14 -Protection class: IP 33 -Price: per piece -Number: 5x available Iiodpfx Aodkf Iieb Nsb -Dimensions: 295/185/H140 mm -Weight: 7 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck Iiodpfx Abeduiwve Neb -Chuck size: Ø 240 mm -Camlock: 3-bolt mount, hole circle Ø 140 mm, short taper Ø 102 mm -Throughout: Ø 77 mm -Weight: 29 kg

Condition: used, Pneumatic cylinder, air cylinder, pneumatic stamp, air stamp, standard cylinder -Manufacturer: Atlas Copco, standard cylinder type C4-200-40 -Stroke: 240 mm -Piston rod: Ø 40 mm -Number: 2x cylinders available -Price: per piece Ijdpogrzvkjfx Ab Noib -Dimensions: 320/280/H470 mm -Weight: 34 kg/piece

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: 240 mm -Mounting flange: M80 x 6 mm -without: interchangeable jaws -Weight: 26 kg Iiodpfx Abjdrwlqs Njb

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Throughout: Ø 77 mm -Weight: 18 kg Iedpfsdz Smkjx Ab Neib

Condition: used, PLC control -Type: Simatic 6ES5 240-1AA21 Isdeb Nkt Ujpfx Ab Njib -Number: 1x available -Price: per package -Weight: 0.5 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -without: interchangeable jaws -Throughout: Ø 77 mm Ijdpfx Abjduacds Nsib -Weight: 18 kg

Condition: used, Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 240 mm Iiodpfxofgb Uxj Ab Nsb -Inside diameter: 103 mm -Hole circle: Ø 133 mm -Dimension: Ø 240/H160 mm -Weight: 7.6 kg

Condition: used, Simatic panel, operator panel, machine control, interface panel, control panel, operating unit, control panel Isdpfshzzcvox Ab Njib -Manufacturer: SIEMENS, Operator Panel OP20/240-8 -Type: 6AV3520-1EL00 -Dimension: 310/220/H135 mm -Weight: 2.8 kg

Condition: used, Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 240 mm -Throughout: Ø 77 mm -Weight: 18 kg Iijdpfxedryd So Ab Nob

Condition: new, machine/vehicle number: c3dd8c834afed73501f8074af, empty load weight: 3 kg, maximum load weight: 20 kg, overall weight: 24 kg, axle configuration: 3 axles, tire size: 385/55 r22,5, Further information Chassis Changing turntable Fine-grained steel welded construction Front stop, longitudinally adjustable and foldable 2 pairs of removable guide rollers, front and rear 4 container locks with sturdy outriggers on 20-basefor swap bodies 7.15 and 7.45 Turntable with strong ball bearing slewing ring 2 wheel chocks with holder Aluminum side bumper Steel underride guard Front half-shell mudguards and rear half-shell mudguards 2 stainless steel storage box, w=600/h=400/t=500 mm, with polished door, lockable 1 pair of warning signs, double LED illuminated, extendable to 3,000 mm at the rear, rear only 1 preparation plug for retrofitting warning signs at the front for customers Towing equipment Trailer turntable Drawbar with tested 40 mm towing eye Drawbar mechanically adjustable in length by 6 x 100 mm and lockable (drawbar length approx. 1,900 - 2,500 mm) Drawbar height adjustment via spring Axles + suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-measured Reduction of tire wear and fuel consumption Air suspension with lift & lower valve Wheels and tires 385/55 R22,5 manufacturer's choice Factory silver steel rims Brake system 2-line compressed air brake system Spring-loaded parking brake 2 interchangeable clutch heads at the front, with connecting cables to the motor vehicle, EBS, electronic brake system with EBS plug at the front, with connecting cable Attention: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! Electrical system 24 volt, multi-chamber lights, amber LED lighting at the side 2 white position lights at the front 2 white/red lane departure lights at the rear Removable rotating beacon 1 additional LED work light(s) at the rear, switched via reversing light Ijdpfxsi Riylo Ab Noib 2 LED work lights on both sides (1x left, 1x right) (switched via reversing light) 1 x 15-pin plug at the front, with connecting cable, Country of registration / plates Country of registration: Germany with Dekra approval and certificate (according to §13 EG - FGV) 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective strips in accordance with ECE R 048, white at the sides and red at the rear Paintwork Hot-dip galvanized frame incl. passivation 15-year warranty against rusting through Drawbar KTL black

Condition: used, functionality: fully functional, machine/vehicle number: 6128193, Year of construction: 2010, operating hours: 5,507 h, load capacity: 2,400 kg, lifting height: 200 mm, fuel type: electric, battery capacity: 375 Ah, battery voltage: 24 V, fork length: 1,150 mm, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), empty load weight: 1,020 kg, BT LPE240 / M Pallet truck, year of manufacture 2010 Details: BT LPE240 / M Year of manufacture: 2010 Work hours (h): 5507 Lift height (mm): 200 Lift capacity (kg): 2400 Fork length (mm): 1150 Weight (kg): 1020 Front wheels: Polyurethane Rear wheels: Polyurethane Battery YOM: 2015 Iedpsx Sx I Rofx Ab Neib Battery capacity (Ah): 375 Battery voltage (V): 24 Drive wheel is new

Condition: good (used), Machine vice, sturdy vice, drill press vice -Jaw width: 215 x 40 mm -Clamping depth: max. 240 mm Iijdpfjfxg Nfsx Ab Nsb -Tension: centric -Dimensions: 460/280/H135 mm -Weight: 35 kg