Used Gernert Schweißtechnik Robotic Welding Cell for sale (8,416)

Condition: like new (used), Year of construction: 2018, Laser Welding Robotic system for welding steel, stainless steel. Bwedpfx Adoh Ad E Uj Ajl Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA HP20RD.(Payload: 20kg, H-Reach: 2017mm, Robot Mass: 293kg, 2010.04) 1 x YASKAWA DX100 controller.(2010.05). 1 x IPG YLS-4000.(2017). 1 x IPG CHILLER.(2017). 1 x HIGHYAG BIMO LASER WELDING HEAD(S.N.:BIMO2W17013). Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Bwodpst Hw D Dsfx Ad Ajl Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: B0508A0463, TRUMPF TruBend Cell 5000 – Robotic Bending Cell | Year 2015 Press brake: TruBend 5230 Bodpfx Ajw Eilysd Aewl Robotic bending system: BendMaster Control system: TASC 6000 (robot and press brake programmed via the machine interface) Press brake specifications: Pressing force: 230 tons Bending length: 4,250 mm Year of manufacture: 02.2015 Serial number: B0508A0463 Operating hours: Machine operating time: 33,789.3 h Hydraulic system: 8,528.8 h Press beam time: 1,119.9 h Description: Fully automated bending solution – the TruBend Cell 5000 is designed for high-volume, precision production. The integrated robot enables efficient bending with minimal operator intervention. Condition: Very good, regularly maintained Dismantling, loading, and transport can be arranged.

Condition: as good as new (ex-display), Fronius TPS 4000 CMT ✅ Scope of delivery: ➤Fronius TPS 4000 CMT power source ➤Fronius FK 4000 ➤Fronius VR 7000 CMT wire feeder ➤Fronius Robacta CMT hose package or CMT hand hose package ➤Fronius intermediate hose package ~1.5m ➤Fronius RCU 5000i ➤Fronius Interbus Rugged Line interface ➤Ground cable 3-4m ➤Pressure regulator from Messer (new) The prices listed start at ... euros. Prices/offers are customized based on the device configuration. CMT (Cold Metal Transfer) technology is particularly known for its high precision and flexibility when welding thin materials and delicate components. Unlike traditional MIG/MAG welding processes, CMT uses a controlled, pulsating wire feed, which transfers the welding wire very precisely into the weld pool. This minimizes spatter, enables excellent heat input control, and reduces distortion and discoloration of the material. We always have several machines in stock in different versions. Ask for a personalized configuration / additional options. ---- AVAILABLE FOR IMMEDIATE DELIVERY PROPER INVOICE A viewing is possible in Vienna, Austria! ✔ Insured shipping on a pallet is no problem! ✔ ✅Questions✅Questions✅ Questions: ✅Questions✅Questions✅ Questions✅ ►►►What is the condition of the machines? ►►► To explain, we buy like-new used devices, disassemble them, inspect everything, replace any worn parts if necessary, and only then, after successful test welding, is the device released for sale. "All" devices are clean and have neither burn holes in the displays nor countless burn holes or dents scattered throughout the device! You're buying an item from us that's ⭐worth seeing and doesn't look completely finished! ►►►Do we receive an invoice when you purchase from us? Yes, you receive a proper invoice from us. If you have a valid VAT ID, we can issue a net invoice if the requirements for intra-community delivery within the EU are met. ►►►What payment options are available? Prepayment or cash upon personal pickup ►►►Is insured shipping possible? Yes, we will be happy to send you the purchased set, well packaged and insured, on a Euro pallet. ►►► ►►►Is there a warranty? We sell the machines at one-third the original price and unfortunately don't have the flexibility to offer a warranty. You are welcome to test the devices on-site and pay in cash. ►►►Why buy from us? Bsdswbixrspfx Ad Aowl We are experts in this Fronius welding machine series and always have 60-80 devices in stock – exclusively Fronius, no other manufacturers! We are experts in these devices and don't sell anything we don't know about.

Condition: as good as new (ex-display), JUNE OFFER. FOR THE WHOLE OF JUNE -10% off all welding machines Bjdshzhynopfx Ad Aewl We offer welding machines in a wide variety of configurations and always have several sets in stock. CMT / ROBOT / CMT UNIVERSAL hose packages or HOLLOW SHAFT robots. Everything in stock and available immediately! Don't hesitate to request your customized configuration! We also have a wide variety of spare parts -30% -50% -70% in stock. Just send us a quick email, call us, or WhatsApp us. CMT MACHINES at 1/3 the new price! - 66% DISCOUNT ALL MACHINES CAN BE VIEWED IN VIENNA and PURCHASED WITHOUT WAITING! The prices listed are all starting from ... euros. The prices/offers are created individually according to the device configuration. .) Fronius power source (TPS 4000 CMT) .) Fronius cooling unit (FK 4000) Vufdfi .) Fronius VR CMT wire feeder .) Fronius intermediate hose package .) Fronius trolley .) Fronius hose package CMT robot .) Fronius RCU 5000i Example images of the product. Please see the numerous YouTube videos on the topic of CMT! Also available via WhatsApp and Viber Stocked in Vienna 1230 (Vienna) Shipping on pallets available for an additional charge: Austria approx. 180 euros Germany approx. 230 euros Europe upon request All prices are starting from prices. You can configure the devices with us. Robot device or handheld device. Long connecting hose package or short. Various hose packages to choose from. Synchropuls. 270 400 or 500 amp units in stock. CMT versions available as handheld or robotic. It's best to call us. We'll discuss your application and give you an initial price estimate.

Condition: like new (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: EQWDCOM, type of input current: AC, ZDI Quality Welding Consumables, Wires, Rods Bsdpfx Adeyaw Hao Ajwl TIG Welding, Robotic Welding, Qualified Manufacturer, Quality Guaranteed. Wires, Rods, Stainless Steel, Nickel and Nickel Based Alloys, Strip Cladding. ERNiCrMo-3, ERNiCrMo-4, etc.

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 20225202986, overall weight: 50 kg, load capacity: 12 kg, arm reach: 1,300 mm, pivoting range: 360 °, Equipment: documentation/manual, TECHNICAL DETAILS Bwedpfsy D I Ikox Ad Aol Load capacity: 12.5 kg Arm reach: 1,300 mm Swivel range: 360° MACHINE DETAILS Control cabinet width: 500 mm Control cabinet height: 500 mm Input voltage: 240 V Input current: 8 A Type of input current: Alternating current (AC) Total weight: 50 kg EQUIPMENT Manual Controller Teach pendant Original packaging and documentation

Condition: new, Year of construction: 2025, functionality: fully functional, total height: 4,500 mm, total width: 7,500 mm, total length: 1,000 mm, Product Description Industrial 4-in-1 Fiber Laser Welding Machine – Model LMH1500 Top performance at a fair price! Our new LMH1500 model featuring a 1500 W Raycus CE-certified laser source offers four integrated functions for professional metalworking: ✅ Key Features: Laser welding – precise, deep, and virtually distortion-free Laser cutting – ideal for thin sheets up to approx. 4 mm Laser cleaning – effectively removes rust, paint, and oxidation Weld seam cleaning – instantly cleans seams right after welding 📌 Technical Specifications: Laser power: 1500W Raycus (CE-certified) Wavelength: 1080 nm Optical fiber: 10 meters Cooling: Integrated water cooling Operating modes: Welding, cleaning, cutting, pulse Voltage: 3×400V / 50–60 Hz Welding speed: up to 120 mm/s Dimensions (L×W×H): approx. 1000×760×450 mm Weight: approx. 170 kg 📦 Scope of Delivery: 1× LMH1500 Fiber Laser Welding Machine 1× Handheld welding gun including nozzles 1× Automatic wire feeder 1× Laser safety goggles 1× Operating manual (German) 1× CE declaration of conformity Bedpsw Tfbrofx Ad Ajwl 1× Risk assessment according to Machinery Directive 💼 Areas of Application: Suitable for stainless steel, galvanized sheet metal, aluminum, copper, brass, and more. Ideal for workshops, mechanical engineering, metal fabrication, body shops, or maintenance operations. 🔒 Certified & Safe: CE certificate including risk assessment according to EU directives. Delivered with all required documentation. 📍 Manufacturer / Distributor: TEC-POINT GmbH Kupferstraße 10, 33378 Rheda-Wiedenbrück 🚚 Shipping & Invoice: By freight forwarding (pallet shipping) within Germany & the EU – shipping costs on request. 🧾 Invoice with VAT shown will be issued. ✅ Buy now and have it delivered ready for immediate operation!

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, load capacity: 10 kg, Are you looking for a flexible and versatile cobot for your production process? This UR10e is an excellent choice. The robot is pre-owned but is in fully functional technical condition and comes equipped with the latest software. This ensures you benefit from optimal performance and compatibility with the newest applications. Bodpfxoy Ip Uae Ad Aswl The UR10e is renowned for its precision, ease of use, and wide range of applications. Whether it’s pick-and-place, assembly, palletizing, or machine tending – this robot can handle it all. What you can expect: - Fully operational UR10e cobot - Latest software installed - Ready for direct use in various applications - Reliable performance you would expect Note: Cosmetic scratches are present on the wrist joint motors. This has no effect on the robot’s operation and is clearly shown in the photos, so you know exactly what you are purchasing. In summary: a powerful and versatile cobot in excellent technical condition, with only minor signs of use. Interested or have questions? Feel free to get in touch!

Year of construction: 2004, condition: excellent (used), Offered from an insolvency is a DC TIG welding machine Manufacturer Migatronic Model Pilot 2400 Year of manufacture 2004 Machine No. 04050694 Technical data: 380 volts Bjdpfefthy Rox Ad Aewl Welding range 5-240Amps Welding power: 240Amps at 35% ED 170Amps at 100% ED 2/4 beat Pulse function HF ignition additional water cooling KG 2 No.25730509 220 Volt 8meter burner package with ground cable ---- without pressure reducer-- Dimensions in mm approx. 510x370x220

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: IRB2600-20/1.65 IRC5 (RW5), load capacity: 20 kg, arm reach: 1,650 mm, controller manufacturer: ABB, controller model: IRC5, teach pendant manufacturer: ABB, Equipment: documentation/manual, IRS Robotics® Refurbished industrial robot. 100% complete and fully functional: robot arm, controller, all cabling, and teach pendant. Includes our warranty and a detailed 77-Point Protocol evaluation performed by our in-house robotics engineers. Brand: ABB Type: IRB2600-20/1.65 Controller: IRC5 (RW5) Payload: 20 kg Reach: 1650 mm Year of Manufacture: 2022 IRS Robotics® refurbished: 77-Point Protocol – fully tested on our test benches, new oil/grease, new batteries, fully cleaned, painted in your desired RAL colour. Bjdsy Iptijpfx Ad Aswl Includes Accuracy Status Measurements (repeatability, accuracy, backlash). About: Our daily reliable business is the delivery of refurbished A-brand robots: ABB – KUKA – YASKAWA. Established 2002. We ship worldwide.

Condition: excellent (used), Spot welding tongs Dalex Type 3011/2 Throat depth 250 mm Rated power 2.4 KVA 380 Volt Bodpfjy Inwgjx Ad Ajwl

Year of construction: 2023, condition: used, We offer this used Weber Ultrasonics Saphir Digital Manual Station ultrasonic welding machine, year of manufacture 2023. Approximately 92,500 units have been produced with this machine. Sonotrode TR35Ti Frequency: 35 kHz Power: 1000 W 230V AC Stroke measurement system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N Bwsdpfx Adsyimqwe Ael If you have any questions or require further information, please feel free to send us a message or call us.

Condition: new, Year of construction: 2025, functionality: fully functional, IMPACT 4in1 from stock Europe MANUAL FIBER LASER 4 IN 1 MACHINE WITH DOUBLE WIRE FEEDING SYSTEM WELDING – CLEANING – CUTTING – WELD CLEAN the IMPACT FL 3000 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it possible that you can use it for Cleaning , cutting and welding. The device ensures a lower cost of use: the energy consumption is about 10-20% of the usual welding processes, and the welding speed is 3-10 times faster than traditional arc and argon welding or plasma welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A welding machine with extra functions as cleaning and cutting from 1,5 Kw together cut at least 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. when you are interested we can send you a complete offer. Bodpfevca Nrex Ad Aowl we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders so that welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: new, Year of construction: 2025, IMPACT 4in1 from stock Europe the IMPACT FL 1500 is the most modern Laser - Welding - Cleaning and Cutting machine in one. Special software and parameter setting in this laser machine make it posible that you can use it for Cleaning , cutting and welding. Most customers use a welding machine in max 20% of the time, the same is for Cleaning and fine cutting. A weldong machine with extra functions as cleaning and cutting from 1,5 Kw together cust atlast 25 till 30.000 euro. so we bring for 50% of the investment cost the same solution and also with the function cutting and cleaning steel and other materials. Bjdpfsu Nf Nzox Ad Ajwl when you are interested we can send you a complete offer. we deliver 3 in 1 machine from 1,5 - 2 and 3 Kw include wire feeder include in the price the 3 kw have 2 wire feeders sothat welder can shift quickly. 1,5 and 2 Kw need 1 phase 220 volt. 3 Kw is on 3 X 380 volt. Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, intake vacuum (max.): 23 mbar, suction capacity: 6,000 m³/h, intake manifold diameter: 300 mm, filter area: 30 m², total height: 3,000 mm, total length: 2,963 mm, total width: 1,006 mm, overall weight: 1,550 kg, year of last overhaul: 2023, AL-KO Mobil-Power Jet 300 7.5kW with Rotary Valve This is the previous model of today’s highly successful Power Unit series. The system was completely upgraded in 2023. A new control unit meeting current standards has been installed, so the unit essentially operates like the latest models. The attached rotary valve enables the transfer of chips for further processing, for example into containers, big bags, ductwork, or briquetting systems. We are happy to assist you with the planning, installation, and expansion of the system. - Inlet diameter: 300 mm Bjdpfxey Iv Tis Ad Aowl - Machine control (optional) for up to 8 machines - Fan motor and nominal capacity: 7.5 kW / 400 V / 50 Hz - Minimum airflow: 5,089 m³/h - Nominal airflow: 6,000 m³/h - Negative pressure at connection: 2,280 Pa - Filter surface: 30.0 m² - Filter material: Category M, electrically conductive - Residual dust content: H3 (max. 0.1 mg/m³) - Integrated extinguishing system - Rotary valve approx. 960x250 mm inlet and outlet

Condition: good (used), Year of construction: 2002, 6-axis articulated robot with control and programming device. Bwodpfx Ajwrx Uksd Ael KRC Software V5.2.14 Includes ZEPOL milling head type 90/150/4 of 3kW and 2850rpm with some tools.

Condition: refurbished (used), Year of construction: 2016, machine/vehicle number: R-00594, load capacity: 270 kg, arm reach: 2,655 mm, controller manufacturer: R-30iB B-Size, teach pendant manufacturer: A05B-2255-C101#EGN, Refurbished FANUC R-2000iC/270F manufactured in 2016.10. The robot comes with an R-30iB B-Size controller including iPendant.   Our experts extensively tested the robot, after which we conducted a maintenance service according to the manufacturers’ specifications. The grease is examined for the amount of iron particles, indicating the corresponding axes' condition. Only robots in excellent mechanical condition will be completely refurbished, ensuring a long-term solution for our customers. This enables us to deliver our robots with a warranty term of 12 months as standard!   Brand: FANUC  Model: R-2000iC/270F Model Number: A05B-1337-B201 Year of Manufacture Robot: 2016.10 Warranty term (months): 12   Payload (kg): 270 Reach (mm): 2655 Bsdpfx Adoy Id Ius Aewl Repeatability (mm): ± 0.05 Controlled Axes: 6-axis Installation Type: Floor Mount Weight (kg): 1320   Controller: R-30iB B-Size Year of Manufacture Cabinet: 2016.10 RCC Length (m): 7   Teach Pendant: A05B-2255-C101#EGN Teach Pendant Cable Length (m): 10

Condition: new, Year of construction: 2024, functionality: fully functional, hose package length: 8,000 mm, New and unused – a unique opportunity. Two welding machines for sale: one DC and one AC/DC unit. For sale is an EWM Tetrix XQ Expert 230 DC, a modular TIG/MMA inverter welder of the latest generation, water-cooled, mounted on a stable trolley. Ideal for workshops, industry, or skilled trades – delivering utmost precision, cutting-edge technology, and long-lasting quality made in Germany. Processes and Features: - TIG DC and TIG pulse - activArc® and spotArc® Bwedpjy I Aapofx Ad Aol - MMA, MMA pulse, MMA Cel, MMA Cel pulse - 2-stroke / 4-stroke operation - Factory-prepared for water cooling, offered here with integrated cooling unit - Splash-proof (IP23) - Generator-compatible, even with long mains cables - Wide mains voltage tolerance - LED status bar for color-coded operation status indication - Temperature- and speed-controlled fan for quiet and clean operation - Robust housing with impact-resistant plastic cover - Welding current adjustment range: 3 A – 230 A - Duty cycle at 40°C: 230 A / 45% | 205 A / 60% | 170 A / 100% - Complete documentation included The unit can be picked up in 8460 Marthalen. An invoice with VAT shown can be provided upon request.

Condition: used, manufacture Nelson Type FSE 100 / FSE 500 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Includes welding head, hoses, and control cabinet. Bedoy Ihbxopfx Ad Ajwl 15 x Nelson FSE 100 + N4 Inverter 5 x Nelson FSE 500 + N4 Converter Price per unit. Accessories, tools, and clamping devices shown are only included if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale reserved.

Condition: refurbished (used), Year of construction: 2010, HOLTEC round timber infeed LINCK infeed conveyor EV40 LINCK V40 LINCK turning device DV55 Bwsdpfjy Ivugsx Ad Aol LINCK infeed conveyor EV40 LINCK V40 LINCK double profiling unit VPP34 LINCK circular saw VS66 LINCK board separator SEA LINCK turning device DV35 LINCK centering unit ZZP LINCK double profiling unit VP34 LINCK circular saw MKV LINCK splitter wedge SEK

Condition: ready for operation (used), MachineSeeker Description Heavy-duty 6-axis industrial robot designed for high-payload automation applications. The KR210 R2700 offers excellent reach, strength and repeatability, making it ideal for demanding production environments. Specifications: Payload Capacity: 210 kg Maximum Reach: approx. 2700 mm Axes: 6 Repeatability: ±0.06 mm Robot Weight: approx. 1100 kg Mounting Options: Floor or Ceiling Controller: KRC2 / KRC4 (depending on configuration) Suitable for: Palletising Welding Machine Tending Bwedpfxjynirwo Ad Ael Material Handling Cutting & Machining Packaging & Assembly Reliable, high-performance industrial robot with large working envelope, built for continuous heavy-duty operation.

Condition: new, Year of construction: 2020, operating hours: 100 h, functionality: fully functional, load capacity: 14 kg, controller manufacturer: Omron, controller model: TM14, input voltage: 230 V, We offer this like-new Omron TM14 industrial robot, year of manufacture 2020, with less than 100 operating hours. The complete Omron TM14 cobot includes vision system, gripper, controller, and software. Fully operational and immediately deployable. Interesting for a customer looking to automate quickly without an integration process? If you have any questions or require more information, feel free to send us a message or call us. Bedpfx Adjyvklve Ajwl

Condition: used, Year of construction: 2012, operating hours: 10,000 h, functionality: fully functional, The FANUC M-10iA is a compact and versatile 6-axis industrial robot, ideally suited for high-speed handling, assembly, and machine loading applications. Paired with the proven R-30iA controller, this system delivers a reliable and high-performance automation solution for a wide range of production environments. With a payload capacity of up to 10 kg and a reach of 1,420 mm, the standard M-10iA covers a broad spectrum of applications. Its slim design and low weight allow for flexible integration—even in confined spaces. The high axis speed enables short cycle times, significantly boosting productivity. The repeatability is ±0.08 mm, ensuring precise and reproducible results, even in demanding applications. The R-30iA controller stands out with its rugged industrial design, high process reliability, and extensive expansion options. It supports numerous fieldbus and communication interfaces, allowing for seamless integration into existing production systems. Technical highlights: - Payload: 10 kg - Reach: 1,420 mm - 6 axes - Repeatability: ±0.08 mm - Compact design Bwsdpjy H Ekuofx Ad Ael - R-30iA controller with comprehensive integration capabilities The FANUC M-10iA is the ideal solution for companies seeking a flexible, fast, and reliable automation system. Especially suited for handling, assembly, packaging, machine loading and unloading, and general production tasks. If interested, we are happy to provide further technical details or prepare a customized quotation.

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, WE Flexmaster 400 laser welding machine Year of manufacture: 2010 Laser unit TruDisk 3302, Trumpf company Cooling unit P805-17640, Termotek company Material: black sheet metal and stainless steel sheet Sheet thickness: 0.6 - 2.0 mm Bwsdpov Ipcfefx Ad Ajl Pipe diameter: 80 - 600 mm Pipe length: 100 - 1250 mm