Used Guss Planar Disk for sale (716)

Condition: used, mileage: 172,240 km, power: 240 kW (326.31 HP), first registration: 01/2013, fuel type: diesel, empty load weight: 15,290 kg, maximum load weight: 10,710 kg, overall weight: 26,000 kg, tire size: 315/80R22.5, axle configuration: 6x2, wheelbase: 3,900 mm, brakes: engine braking, color: orange, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: air, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, cabin, cruise control, immobilizer system, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, 1x comfort seat, double bench seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, raised exhaust, automatic, lifting+lowering, rotating beacon, air-suspended, aluminum tank, last axle hydr. steered, aluminum side bumpers, roof hatch, green environmental badge Wheelbase: 3900 mm Body: Waste collection body Haller EEV engine, front axle air-sprung, 7.5 t front axle, rear axle H7 13 t disk wheel 300, axle load measuring device, Telligent trailing axle hydraulically steered, ABS, ASR, stop brake, disc brakes on front and rear axle, front underride guard, Stabilizer reinforced for NLA, lifting/lowering device, starting aid, parameterizable special module (PSM), pre-installation for toll collection, on-board diagnostics 2, Allison automatic transmission 3200 P, engine brake with constant throttle, automatic daytime running lights, radiator guard at the bottom, rear engine output torque 600 Nm. Rcjdpfx Abevhnlfj Tjf With retrofitted Proventia NoXBuster exhaust gas purification system! ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, mileage: 139,090 km, power: 265 kW (360.30 HP), first registration: 09/2011, overall weight: 26,000 kg, fuel type: diesel, color: white, axle configuration: 6x2, maximum load weight: 9,700 kg, empty load weight: 16,300 kg, tire size: 315/80R22.5, wheelbase: 3,900 mm, brakes: constant throttle, driver cabin: day cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, Mtlg. house, 2x comfort seat, seat heating, rear window, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, Telligent gearshift, switch 16, ABS (anti-lock braking system), traction control system (ASR), constant throttle, power take-off, raised exhaust, differential lock, fog lights, work lights, storage box, leaf-air suspension, low-noise G1, last axle hydr. steered, U-protection, aluminum side bumpers, rear outlet, roof hatch, green environmental badge Rsdpfx Aovhn Ersb Tecf Wheelbase: 3900 mm Body: Müller suction and flushing trailer type Canalmaster F 105 E approx. 10.5m³ (8000l sludge chamber/2500l water chamber) Axle load measuring device, 8t front axle, rear axle H6 13t disk wheel 440, Telligent trailing axle hydraulically steered, Telligent brake system with ABS and ASR, disc brakes on front and rear axle, Front underride guard, additional rear/trailing axle stabilizer, parameterizable special module (PSM), starting aid, pre-installation for toll collection, distributor cockpit, Telligent circuit II, on-board diagnostics 2, reversing alarm, transmission oil cooling, tank capacity: 400l, driver airbag, Driver Pack Standard, power take-off independent of transmission MB 1.0, transmission lock independent of transmission NA (NMV). ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 1 kg, total length: 123 mm, total width: 102 mm, total height: 25 mm, input voltage: 5 V, type of input current: DC, warranty duration: 24 months, Nalbantov N-Drive Industrial is a USB floppy disk drive emulator designed as a replacement for legacy 3.5" floppy drives used in CNC machines, industrial controllers, textile machines and other professional equipment. The unit replaces the original floppy drive and allows the machine to read virtual floppy disks from a standard USB flash drive. It is supplied configured according to the target machine/interface. Application: Replacement for legacy floppy disk drives in CNC machines, industrial controllers, embroidery machines, textile machines, laboratory equipment and other professional systems. Additional information: The listed price is for 1 pc, excluding shipping, import duties, taxes and customs fees. We ship worldwide by DHL. Standard shipping for 1 pc is usually EUR 32. For multiple units, combined shipping discounts may apply. This is a new retrofit USB floppy drive emulator for CNC and industrial machines. Please send us the machine brand/model and, if possible, a photo of the original floppy drive or control panel so we can confirm compatibility. Main Features Configurable hardware interface for many legacy floppy drive systems Plug-and-play installation No additional drivers required Same size and connector layout as a standard floppy drive Supports standard USB flash drives Up to 100 virtual floppy disks on one USB flash drive No moving parts for improved reliability Stainless steel front panel Laser-etched front panel markings LED display for virtual disk selection Supplied with USB flash drive, software, manual and technical support Panel Controls Selection Buttons Used to select the virtual floppy disk number. The selected virtual disk will be loaded from the USB flash drive. LED Display Shows the currently selected virtual floppy disk number. Green Status LED Indicates drive activity. The LED flashes or remains lit while the connected machine is reading or loading a virtual floppy disk. USB Port Used for inserting a compatible USB flash drive. Supported Interface File System: FAT12 / MS-DOS Optional: custom file systems depending on the machine Disk Size: 1.44 MB / 720 KB Optional: 160 KB, 180 KB, 320 KB, 360 KB, 640 KB, 1.2 MB Floppy Drive Type: 3.5" Optional: 5.25", slim floppy drive format Rotation Speed: 300 rpm Optional: 360 rpm Drive Select / Signals: DS0, DS1, MO, DC signal Optional: Ready signal Floppy Interface Connector: 34-pin Optional: 26-pin, 24-pin Important Compatibility Note: Configuration may vary depending on the specific machine, controller, floppy interface and disk format. The N-Drive Industrial is configured according to the target equipment before shipment. Software Compatibility The included software is supported by: Windows XP Windows Vista Windows 7 Rcsdpoza U Uzefx Ab Tsf Windows 8 Windows 10 Windows 11 Windows Server 2008 Optional support: Windows 98 Windows Me Windows 2000 Mac OS Dimensions: Length: 12.3 cm / 4.8 in Width: 10.2 cm / 4.1 in Height: 2.5 cm / 1 in Package Includes Nalbantov N-Drive Industrial USB floppy disk drive emulator Prepared USB flash drive Software for transferring data from old floppy disks to USB flash drive User manual Mounting instructions Technical support 2-year warranty

Condition: good (used), Year of construction: 2007, Ref. -No.: 10473 Manufacturer: HEDELIUS Type: C60 - 2000 Year of construction: 2007 Type of control: CNC-Steuerung Control: Heidenhain iTNC 530 Rodpfx Aszc Dzpob Tocf Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 620 mm Z-Travel: 520 mm Table Height: 860 mm Max. Workpiece Weight: 2000 kg Max. Tool Length: 330 mm Max. Tool Diameter: 80/125 mm Clamping Area: 2500 x 600 mm T - groove width: 18 mm T - slot spacing: 100 mm Numbers Of Tools In Magazin: 30 Turning Speed Range - Stepless: 30 - 8000 RPM Max. Torque: 198 Nm Rapid Travel X/Y/Z: 45000 mm / min Number of radial T-slots: 5 Machine length: 5400 mm Machine width: 3300 mm Machine Height: 3000 mm Weight Of The Machine Ca.: 10,5 t Further information: Distance spindle nose - table: 100 - 620 mm Tool clamping: disk spring Machine can be inspected under power by arrangement.

Condition: used, Double chamfering line TFA3/D/12.5 Tube facing & bevelling The MAIR TFA3/D/12.5 double chamfering line is a high-performance industrial solution designed for simultaneous facing and internal/external bevelling of steel tubes. The line is capable of processing two tubes at the same time, finishing both ends with high precision and repeatability. Engineered for demanding production environments, this chamfering line is suitable for carbon steel tubes, hot or cold rolled, pickled or zinc-aluminium coated. Thanks to its CNC-controlled chamfering units, automated tube handling and integrated chip removal and blowing systems, the MAIR TFA3/D/12.5 ensures high productivity, consistent quality and reduced manual intervention. Scope of supply The complete MAIR TFA3/D/12.5 double chamfering line is composed of: · Accumulating table for single-tube extraction via chain conveyors · Walking beam system for synchronized transport of two tubes · Two CNC chamfering machines, each equipped with: - Heavy-duty welded steel frame - Double chamfering unit with servo-driven linear movement - Tube clamping devices with interchangeable jaws - Toolholder disks for facing and internal/external bevelling - Hydraulic tool locking system (Morse taper) - Centralized lubrication system - Presetting bench for toolholders - Control panel · Chip conveyors located under the machines · Driven rollways and adjustable tube clamping stations · Blowing station for internal tube cleaning with adjustable system · Set of tooling (to be confirmed) Redpfx Aboyl Upvj Tocf Technical data · Manufacturer: MAIR · Model: TFA3/D/12.5 · Application: Double tube facing and inside/outside bevelling · Tube diameter range: 17.2 – 89 mm (3/8" - 3") · Tube length: 4 – 12.5 m · Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated) Tube diameter range: 17.2 – 89 mm (3/8" - 3") Tube length: 4 – 12.5 m Material: Carbon steel strip (hot rolled, cold rolled, pickled or zinc-aluminium coated)

Condition: good (used), Year of construction: 2019, functionality: fully functional, Design: Tabletop machine - Manual operation via 2-hand start - Ergonomic working with comfortable mushroom-shaped push buttons - Innovative emergency stop on the machine table - Emergency stop lighting visualizes machine status - Machine table 300 x 300 mm - Overhang (to the center of the sonotrode) 197 mm Model: FUSION CONSOLE P Rodpfozil I Aex Ab Tocf 1 Deflection-free machine stand - Patented brackets for maximum parallelism between the sonotrode and the workpiece - Ensures drive tracking for a stable process SERVO DRIVE 1 Fully electric servo drive - Height adjustment completely electric - Freely selectable start position for the shortest cycle time - High speed up to 240 mm/s - Stroke 300 mm with absolute position measurement POWER PACK P 1 High-precision force measurement with force sensor - Force 5 – 1000 N - Fast force control over the entire force range PROCESS MONITORING 1 Welding process control model FUSION - Industrial PC with 17.3" color touchscreen - Welding types: distance relative, distance absolute, energy, time, power - Amplitude, force, or speed profiling with up to 5 steps - Comprehensive quality control with graphical display - Reliable monitoring of welding and process parameters - Easy setting of tolerance limits with setup assistant - Sequence setup for clear configuration of additional functions - 25 user levels with password protection - Productivity overview with piece and shift counters - Recipe management for up to 300 welding parts 1 UPS – uninterruptible power supply - Secure process documentation even in the event of a power outage 1 Standard control cabinet with electrical components and main switch - Dimensions approx. 450 x 600 x 300 mm PRODUCTIVITY 1 Vibrating tool holder, screwed - With indexing of the sonotrode alignment - Ergonomic holder made of aluminum - Easy replacement of the entire vibrating tool 1 Adjustment plate - Size 280 x 280 mm - Easy planar-parallel alignment of the workpiece to the sonotrode - Universal hole pattern for easy fixing of the fixture CONNECTIVITY 4.0 Comprehensive connection options and machine interfaces - Variable interfaces for up to 4 peripherals - USB & LAN connection for easy process data processing - Troubleshooting and assistance via remote service from MS Service Ultrasonic: 20 kHz with 1000 W 1 Digital ultrasonic generator soniGEN 20 /1000 - Frequency 20 kHz - Power 1000 W - Amplitude stabilization - Automatic sonotrode scan - Load compensation 1 Piezoelectric ultrasonic converter soniCON 20 kHz - Protection class IP54 - High-quality HF connector 1 Amplitude transformation piece soniAMP 20 kHz - Ratio 1:1 - Material: Titanium Please refer to the data sheet for technical specifications.

Condition: used, Slotted disks, window milling tools, indexable inserts, window construction tools Rsdpfx Abob A S Tbo Tjcf -Slit disk milling tool for: wooden windows -ZUANI LOGIFIX -Socket: Ø 50 mm -Weight: 6.8 kg

Condition: used, Double bench grinder, bench grinder, column grinder, column grinder Rodjc Ibywopfx Ab Tocf -Motor power: 3.3 kW -Speed: 1400 rpm -Grinding disks: Ø 400 x 50 mm -Operating voltage: 380 volts -Dimensions: 800/1120/H1540 mm -Weight: 434 kg

Condition: used, machine/vehicle number: 8354, disk of circular saw-Ø: 350 mm cutting area at 90° round: 90 mm cutting area at 90° square: 160 x 70 mm cutting area in mitre at 45° square: 120 x 60 / 60 x 80 mm cutting speed: 30 m/min Rjdpjby Hikefx Ab Tjcf engine: 1,1 kW space needed: 1000 x 1250 x 1380 mm

Condition: used, Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter Rcedpfx Asciv S Hsb Tjf -Outer: Ø 300 mm -Height: 12 mm -Disk milling cutter -Socket: Ø 60 mm -Number: 3x milling cutters available -Price: per piece -Weight: 12.7 kg

Condition: good (used), Year of construction: 2000, functionality: fully functional, Wide belt sander SCM Sandya 40 M1 Year of manufacture 2000 S/N AE/020761 Manufacturer SCM Group S.p.A Italy Sanding width 1.350 mm Workpiece thickness min 4-170mm 1 sanding unit, calibration 250mm diameter Roller hardness °Shore 55 Vacuum table Main motor 11 kW ( 15 HP) Sanding belt length 2,620 mm Feed max 19 m/min Feed stepless Fixed working height 900 mm Sanding belt blow-off device Electropneumatic segment control Belt change side left SYEL CN 51 control unit Carpet feed with speed controller Electronically controlled sanding belt oscillation Main motor with disk brake Rubber-coated pressure rollers Automatic carpet centering Automatic table positioning Air requirement Nl/min 15 Operating voltage 400V/ 50 Hz Total power 40 Amp Rcodpfxetttafs Ab Tjf Dimensions: L x W x H= 1917mm x 2134 x 2365mm Weight approx. 2540 kg

Condition: excellent (used), Welding current max.: 5kA Welding force: 45-150N Closing stroke: pneumatic Welding pressure: pneumatic, resetting unit with disk spring Force adjustment: Proportional valve Electrode shape: cylindrical, 6mmØ --- Welding control: optional (according to recommendation) --- equipped with: - Base body with welding heads on aluminum Rodpjtq Ez Eefx Ab Tocf - Modular design - Electrodes top and bottom with feed cylinder - Welding head top F120K with repositioning unit - pneumatic valve units - Pneumatic air cooling unit for electrodes - Workpiece carrier on dovetail guide, for exact positioning to electrodes positioning to electrodes --- Warranty 6 months --- Training + commissioning on request --- Spot welding electrodes + spare parts available from stock --- Further information on our homepage

Condition: excellent (used), AGATHON 150 SL2 Centerless cylindrical grinding machine TECHNICAL DATA Working wheel: Diameter: 150 mm width: 50 mm Bore: 50 mm Regulating disk: Diameter: 100 mm Width: 50 mm Bore: 40 mm Workpiece diameter: Minimum: 0.1 mm Maximum: 12 mm Max. Length for plunge-cut grinding: 49 mm Weight: 750 kg Connected loads: 3 X 380 V / 50 Hz Compressed air: 5-6 bar Dimensions: Machine: 1000 x 500 x 880 mm Electrical cabinet: 1550 x 540 x 420 mm Coolant tank: 750 x 550 x 700 Rjdpfxjr Hdi Aj Ab Tjcf SCOPE OF OFFER U.A: (list not exhaustive): Grinding wheels regulating wheels Spare flange mandrel Grinding pads Complete operating documentation Exact scope of offer according to photo gallery We assume no liability for the accuracy, completeness and up-to-dateness of the information provided.

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: AV0572, SPINNER TC800 with X=360mm, Z=900mm travel in a 45-degree inclined bed design with hardened and ground guide rails WITH driven tools WITH Y-axis POWER TURRET - WITH driven tool stations all tool stations can be driven on turret disks with a pitch circle or on the inner pitch circle designed as a servo turret Tool holder on the turret, System BMT65 Number of tool stations in the turret: 12 SPINDLE 1 in a version up to 3,400 rpm - 85mm As an integrated motor spindle, with water cooling in modern synchronous technology with a hydraulic collet chuck, bar capacity 85mm, speed range 0-3,400 rpm, Pmax 80 kW / 930Nm Spindle nose DIN55026/A8 FOOT SWITCH TAILSTOCK in the program, movable by connecting to the Z-axis, hydraulically clamped to the bed. With an additional integrated hydraulic quill and bearing for a fixed center. FOOT SWITCH DIRECT MEASURING SYSTEM in the X-axis Control system SIEMENS 840DE with the following basic scope: - SPINNER - SPIOS 24" touch operating panel for I4.0 applications - Operating panel with adjustable height, rotatable and tiltable for best ergonomics - incl. engraving cycles - 24" liquid crystal flat color screen with multi-touch functionality - User memory 2 GByte - 15 zero-point offsets - 1 free USB interface - Ethernet interface standard SPINNER MULTI-CONTROL-WHEEL on the operating panel, integrating the following functions into a single control element: Rjdpjrbhd Njfx Ab Tecf - Handwheel function in jog mode - Feed override in automatic mode - Start button and feed influence in single-block setup mode, automatically resetting to 0% at the end of the sequence -> all important functions of the setup mode integrated into one control element - SHOPTURN - 4-axis machining with a rotary axis - 3D SIMULATION of the finished part - REMNANT MATERIAL DETECTION - DXF reader CHIP CONVEYOR as a hinged belt conveyor, discharging to the right, incl. integrated coolant tank and conveying pump. HIGH-PRESSURE PUMP 15 bar CARTRIDGE FINE FILTER MEASURING PROBE for tool measurement in the working area incl. quick-change coupling STANDARD DOCUMENTATION in German consisting of a machine manual and CNC manuals is delivered in digital form on the control system. STANDARD PAINTING two-tone in light gray RAL7035 and blue-gray RAL5008 Electrical design EUROPEAN STANDARD as follows: Operating voltage 3x400V +/-10% Mains frequency 50Hz (+/-2%) TN system (5-conductor) Notes: The price includes warranty services only within Germany. In the case of new and demo machines, the pictures are not necessarily of the individual machine, but of comparable machines. Accessories shown, such as clamping devices or tool holders, are only included in the scope of supply as listed in the technical description. Please ask for a detailed offer ex works. Visit our factory near Munich or one of our showrooms. We may have other offers for comparable machines. Subject to prior sale.

Condition: used, mileage: 231,984 km, power: 355 kW (482.67 HP), first registration: 04/2021, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, loading space volume: 45 m³, loading space length: 7,060 mm, loading space width: 2,480 mm, loading space height: 2,550 mm, Year of construction: 2021, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, DAF XF 480 FAN6x2 ALU tipper VIN: G349375 Chassis / add-on parts: * Wheelbase: 4,600 mm // 1,400 mm * Full / air suspension * Lift / steering axle * Alcoa Dura Bright aluminum wheels * Tires: 315/70 R.22.5 * Condition: V.~70/80% M.~50% H.~70% * 1 x Alutank * 1 x AD Blue tank * 1 x hydraulic tank * 1 x Bevola stainless steel storage box * Foldable underride guard Cabin: * SSC / Super Space Cab * 2 couches * Auxiliary heating * Automatic air conditioning * Auxiliary air conditioning * Radio CD / CB radio * AUX, USB, BT * ACC / LDWS * Sky-Lights * DAF Night-Lock Body: * Lück ALU rear tipper * Dimensions: 7.06 m x 2.48 m x 2.55 m / approx. 45 m³ * Standing platform * Roll-up tarpaulin * Front cylinder * Rear door with pneumatic locking system * Mud-tight Engine / gearbox: * 12,902 cc // 480 HP / 355 KW // EURO 6d * ZF TraXon transmission / automatic * ZF Intarder * Differential lock Weights: * Total weight: 26,000 kg * Unladen weight: 12,370 kg * Payload: 13,630 kg Other: * German vehicle * 1 previous owner * Maintenance history available _____ 2 axle LÜCK tandem trailer VIN: L41662 * Air suspension lifting + lowering * 2 x SAF with disk brakes * Alcoa Dura Bright aluminum wheels * Tires: 385/65 R.22.5 * Residual profile: V.~80% H.~30/80% * Roller tarpaulin * Haacon front stabilizer * Rear Haacon drop supports * Folding underride guard Superstructure: * Lück ALU rear tipper * Dimensions: 7.05 m x 2.49 m x 2.55 m * Volume: approx. 45 m³ * Standing platform * Roll-up tarpaulin * Front cylinder * Rear door with pneumatic locking system * Mud-tight Weights: * Total weight: 18,000 kg * Unladen weight: 4,900 kg * Payload: 13,100 kg Other: * German vehicle * 1 previous owner New general inspections / safety tests or weight reductions/additions are possible on request. We will be happy to assist you in obtaining export/transfer license plates, and it is also possible to transfer your purchased vehicles within Germany. Please contact us at ---- We speak the following languages: German, English and Russian!---- No liability for printing & typing errors, changes, prior sale and errors excepted!----Who are we ? Leible Nutzfahrzeuge is a family business based in Kehl am Rhein. Thanks to our many years of experience in the reconditioning and sale of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible Nutzfahrzeuge lies in the sale of new and used commercial vehicles. A large number of vehicles can be found on 11,000 square meters. Our corporate philosophy is characterized by fairness and reliability. As customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person to assist them with the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load your purchased vehicles. Organizing special transports We are happy to help you organize special transports. Rjdpsqiydgjfx Ab Tocf Daily numbers / export license plates We will be happy to help you obtain export license plates/short-term license plates. Completion of customs formalities

Condition: new, Year of construction: 2025, Model 2022 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction Rcedofdr Thjpfx Ab Tef - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Condition: good (used), Year of construction: 2001, functionality: fully functional, Used machine MAKA PM 270 R 5-axis CNC machining center for machining wood, plastic and aluminum. Machine in mobile portal design, with rack and pinion drive. Year of manufacture: 2001 Technical data: CNC control BWO 900C, for 5-axis machining. Integrated PC with 1MB memory and 3.5" floppy disk drive. Mobile control panel stand. Working areas in 5-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 5,600 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) Working areas in 3-axis operation, with tool diameter 60 / length 160 mm: Y-axis: 6,000 mm X-axis: 1,350 mm Z-axis: 420 mm / with 180 mm fixture height (vacuum suction cup) A-axis 540° (rotation axis) B-axis 200° (swivel axis +/- 100°) Rapid traverse speed X/Y axis 45 m/min. Z axis 24 m/min. A/B axis 10 m/min. Milling unit: - 1 universal unit for 5-axis milling with 50° inclined head, power max. 12.5 kW, speed continuously adjustable up to 17,000 rpm, milling spindle water-cooled. - 1 NC height-adjustable chip collection system with slat curtain. Tool magazine: - ISO 40 tool interface for automatic tool change system. - 1 chain tool magazine with 32 spaces for tools up to D = 90 mm, with sorted storage up to max. 160 mm. (Three spaces are required for this). Machine table: - 10 support tubes on linear guides with pneumatic release device for quick positioning. - 2 control circuits for "lifting/lowering" stops - 2 control circuits for "lifting/lowering" slide rail - 2 control circuits for "clamping/loosening" pneumatics - 2 vacuum control circuits with button for clamping and automatic reset through CNC programming. - 1 chip conveyor belt integrated in the base frame, for removing chips and small waste up to max. approx. 100 x 100 x 100 mm. Redpfx Ajvmywqob Tocf Tools: Tools are not included in the scope of delivery! The system can be delivered including various tool holders upon request. We would be happy to make you a separate offer for this. Vacuum supply: - 1 vacuum pump, approx. 140 m³ suction power, including a tank with a capacity of 250 liters for quick vacuum build-up. - 10 vacuum supports with various suction plates. - Various clamping devices for posts and curved parts. - Raise/lower stops to position components. Other: - Automatic central lubrication. - Control cabinet with air conditioning unit. - Projection laser Work safety: - Mobile protective cabin with safety bumpers on the operator side.

Condition: used, mileage: 495,419 km, power: 350 kW (475.87 HP), first registration: 02/2020, fuel type: diesel, empty load weight: 8,039 kg, maximum load weight: 9,961 kg, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 3,700 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, Vehicle location: Bovenden, Wheelbase: 3700 mm front axle air-sprung, 8t front axle, rear axle Hypoid 13t disk wheel 440, electronic brake system with ABS and ASR, disc brakes on front and rear axle, electronic parking brake, secondary water retarder, condensation water monitoring for compressed air system, aluminum front underride guard, residual heat utilization, comfort bed top & bottom, BigSpace, LED ambient lighting, electric parking cooler, auxiliary hot-water heating, additional thermal insulation, electric lifting roof, MirrorCam, comfort locking system, rain/light sensor, economy/power drive program, Mercedes PowerShift 3, LED daytime running lights, navigation system, Multimedia Cockpit, Remote Online, pre-installation for toll collection, bi-xenon headlights, headlight cleaning system, automatic high/low beam and cornering lights, High performance engine brake, Safety Pack, Powertrain Pack 2, Climate Package, Economy Package, Interior Chrome Package, ESP, Lane Keeping Assist, Distance Assist, Active Brake Assist 5, Attention Assist, Traffic Sign Assist, Permanent Cornering Assist, Tire Pressure Monitoring, Driver Airbag, Fridge. Fin: W1T96340610444016 Multiple available, prices from 41.900,00€-43.900,00€ depending on mileage! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Redpovhi Izefx Ab Tocf - .

Condition: used, mileage: 249,210 km, power: 320 kW (435.08 HP), first registration: 04/2011, overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 6x2, maximum load weight: 7,560 kg, empty load weight: 18,440 kg, wheelbase: 4,200 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro5, suspension: steel-air, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, immobilizer system, low noise, onboard computer, power assisted steering, seat heater, traction control, Vehicle location: Bovenden, mtl. house, 2x comfort seat, seat heating, electric mirror, heated mirror, electric window left, electric window right, air conditioning, sun visor, cruise control, electric glass roof, ABS (anti-lock braking system), traction control (ASR), constant throttle, auxiliary drive, exhaust raised, automatic, fog lights, rotating beacon, storage box, leaf-air suspension, aluminum tank, noise reduction G1, last axle hydr. steered, U-protection, aluminum side bumpers, radio remote control, green environmental badge Wheelbase: 4200 mm Superstructure: Kroll suction and flushing superstructure approx. 12m³ (8500l sludge chamber/3500l fresh water) with radio control 9t front axle, axle load measuring device, rear axle H6 13t disk wheel 440, Telligent trailing axle hydraulically steered, disc brakes on front and rear axle, Telligent brake system with ABS and ASR, Front underride guard, additional stabilizer rear/trailing axle, sliding/lifting roof electric in glass version, starting aid, PSM, distributor cockpit, comfort locking system, Telligent gearshift II, pollen filter, reversing alarm, on-board diagnostics 2, transmission oil cooling, tank capacity: 300l, power take-off independent of transmission MB 1.4. High-pressure pump: Hammelmann, 1221 operating hours Rodpfx Aevhkmleb Tscf Vacuum pump: Wittig, 3340 operating hours ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, Unwinding and rewinding reel for coil material, HMS type BA 1.5-06/80 Machine No. Year of manufacture 1991 Rodpjhx R Etjfx Ab Tecf Coil weight max. 8000 kg Coil outer diameter max. 1600 mm (with loading carriage) Coil outer diameter max. 2000 mm (without loading carriage) Diameter of the coil running disk Ø 1700 mm Coil inner diameter, spreading range 460-520 mm Coil width, nominal width max. 630 mm Width of the spreading jaws 750 mm Height of the reel crown above the base plate 1500 mm - Drive of the reel crown via hydraulic motor with gearbox and gear - Pneumatic trailing brake on the reel crown TWINFLEX - Hydraulic operating brake - Hydraulic stop brake - Hydraulic spreading of the reel crown, centrally via wedge slide system - Hydraulic pressure arm with hydraulically driven double rocker roller - Coil loading carriage with 12 ton lifting capacity and 300 mm stroke - Reel on above-ground travel frame with motorized lateral travel drive - Hydraulic unit located nearby (also used for other functions on a conveyor system) - Without electrical control cabinet (or, there is an electrical control cabinet that supplied the entire conveyor system) Transport dimensions L x W x H 3500 x 1900 x 2500 mm Own weight approx. 5 tons Good condition - not electrically operational.

Condition: new, Year of construction: 2025, Model 2025 - the marking hero among the laser markers! Metal - plastics and much more! Easy. Simple. Precise. - EZCAD 3 (real 64bit map) with up to 4 axes - Windows Professional 64bit - Intel I3 or I5 with 8Gb and ultra fast M2 hard disk - 23" TFT screen for fatigue-free work - Professional MOPA fiber laser source JPT with 20 Watt output power and up to 600 kHz (optionally with variable pulse width and up to 2000 kHz for color start marking) - Scanner unit "DigiScan Eco 10" for detail and precision. - T-slot plate or threaded hole plate for easy mounting and positioning of your workpiece - large viewing window with certified glass - Scanning area approx. 100 x 100 mm (optional 150/200/300 mm) - manual height adjustment with focus finder - Housing with man. Door easy and safe marking. - Professional marking software in German language - Barcode and QR Code support - Serial number function - Batch scanning from Excel file, network or database! - Laser parameter finder per matrix via 2 parameters (e.g. frequency to speed, frequency to power) - TCP IP connectivity. Various commands can now be transmitted to the software via TCP protocol. This allows the easy integration of external components like camera position detection etc. - Industry 4.0 over the TCP/IP protocol the status can be processed at any time - Inputs and outputs for automation - New look and feel. A fresh design, for even clearer and more pleasant operation - 3D preview for rotary axis machining - Performance increase of up to 50% through 64Bit Technology - Improved stability - Optionally up to 4 axis controls WITHOUT switching via PLUGins. - Optional DEEP engraving (Slicer software with control of the Z axis) - New algorithms increase the engraving speed for hatching. - Completely redesigned galvo generation (Eco, Hi-Speed & 3D) with 2x laser pointer for visual checking of the focus position. - LED-illumination of the marking area for good illumination - Connection possibility for external suction - Start button and EMERGENCY STOP on the housing - Software suitable for Windows 10 - USB cable to connect to the computer - Operating instructions and operating software in German As an option we offer among others =ᐳ Base with castors and space for computer and suction =ᐳ IPG or SPI fiber laser sources in different powers =ᐳ motorized and automatic height adjustment =ᐳ Scanlab equipment =ᐳ suitable suction =ᐳ Automation for placement, conveyor belts and much more! =ᐳ 3D marking and engraving function. =ᐳ automatic focus adjustment via special laser sensor =ᐳ Rotating unit in different versions =ᐳ motorized slides in X and Y =ᐳ Interlock system for lettering WITHOUT protective housing, but only PSA (personal protective equipment) for bulky parts incl. training in our training center Schweinfurt! Rjdpsg H Tn Isfx Ab Tecf Our engraving lasers are manufactured in our Schweinfurt factory! Therefore individual wishes are possible at any time! =ᐳ Made in Schweinfurt! Pictures may contain options! We are your partner for laser engraving machines and laser engravers. No matter if manual or automatic laser marking machine. We would be pleased to submit you an offer.

Year of construction: 1987, condition: good (used), machine/vehicle number: 108922, disk of circular saw-Ø: 400 mm cutting area at 90° round: 130 mm cutting area at 90° square: 305 x 40 mm cutting area in mitre at 45° round: 130 mm cutting area in mitre at 45° square: 245 x 40 mm cutting speed: 10 m/min Rsdpfjhz T Hfjx Ab Tjcf engine: 380 V, 1,7 kW space needed: 1100 x 1000 x 1900 mm weight: 700 kg

Year of construction: 2005, condition: excellent (used), functionality: fully functional, elumatec SBZ150 Profile Machining Centre 6.0 m 5-axis control. Efficient machining of aluminium and steel profiles Working length: 6,000 mm Description: Short tool change times; Automatic tool changer for eight standard tools and three special tools (saw blade, special milling cutter diameter 50 mm, angle head or special milling cutter diameter max. 100 mm); Six-sided machining; Underside machining with angle head (option); Rapid base positioning (up to 60 m/min) of the processing unit in the X-axis; Low-wear direct drive; With automatic clamp detection and positioning; Dual-circuit clamping system with two pneumatically retractable stops; Standard with automatic central lubrication system; Robust machine bed for a working length of 6,000 mm; Continuous support table; Clamping system with integrated six-row recirculating roller units and linear guides. 5-axis industrial PC control, with 3 axes for path control; High-dynamic three-phase servo drives with resolver and digital servo controller; Swivel angles of the A and C axes freely programmable; With color screen and disk drive; Memory capacity of over 200,000 sets; 3 serial and 1 parallel interface for online connection; Barcode scanner, label printer, etc. Integrated network card 10/100 MBit, RJ 45 port (network connection by customer’s IT administrator) Analog modem (customer must provide an analog telephone line) Technical data: Travel range X-axis: max. 6,240 mm Max. travel speed 60 m/min. Travel range Y-axis: 1,000 mm Max. travel speed 30 m/min Travel range Z-axis: 635 mm Max. travel speed 30 m/min. Swivel angle A-axis: 0-90° freely programmable Swivel angle C-axis: 0-355° freely programmable Further details on the milling range see drawing no. 150 05 17 08 Max. processing length for face machining left + right: 6,000 mm (with tool length 150 mm) Positioning accuracy: X-axis +/- 0.1 mm / 1 m length Y-axis +/- 0.1 mm Z-axis +/- 0.1 mm Milling spindle: Speed [rpm]: up to 100–22,000 Power [kW]: 15 Tool holder: HSK-F 63 Milling cutter diameter: 100 mm max. Saw blade diameter: 400 mm Tool length: max. 150 mm from nominal taper. Included accessories: Automatic tool changer (without tool holders); Dual-circuit clamping system with 2 pneumatically retractable material stops; Automatic clamp detection and positioning; 8 horizontal pneumatic material clamping units; Rodpjw A Rv Ijfx Ab Tscf Tool presetting gauge Front light barrier Saw blade D400 with mount Angle milling head Important: The profile machining centre is fitted as standard with front light barriers. Any necessary side or rear guarding must be supplied on-site by the customer or please request an offer for safety fences from us. Incl. Angle milling head for underside machining

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, Kawasaki RS05L robot with E-Controller and enclosure Rodpfezmrn Dex Ab Tecf Control system: E-Controller Number of axes: 6 Max. payload: 5 kg Max. working range: 902 mm Year of manufacture: 12/2012 Scope of delivery: Robot, control system, cables, teach pendant, wiring diagrams, floppy disk drive for data backup. Used – shows normal signs of wear. Further details, article numbers and images available on request. Two weeks commissioning guarantee. No further warranty. In addition, spare parts are constantly available in stock. The robot is fully functional and can be inspected at any time. Free loading / ex works. The stated amount is net. The legally required value-added tax of 19% will be added at checkout. You will receive a proper invoice with the VAT shown. Collection on site in 74722 Buchen/Hainstadt. Shipping or freight costs vary depending on the quantity, weight, and desired delivery conditions. Shipping costs to foreign countries on request – please specify country, city, and postal code. Freight costs on request – please specify delivery address.

Condition: reconditioned (used), Year of construction: 1984, Universal Tool Milling Machine DECKEL FP 3 Rcodexuh Rdepfx Ab Tef With 3-axis active digital display Heidenhain TNC 11 Year of manufacture: 1984 Travel: X 500 / Y 300 / Z 400 mm Speed range: 25 – 2500 rpm Including the following accessories: - Rigid angle table, 850 mm x 400 mm clamping surface - Swiveling rotary table Ø 450 mm with dividing disks - Slotting head - Movable vertical milling head - Extendable quill for drilling - Infinitely variable feed via potentiometer - Various milling arbors SK 40 / S22 x 2 - Chip tray - Automatic central lubrication pump for X, Y, Z axis - Machine lamp - Coolant system - 4 machine feet - Operating manual