Used Hand-Operated Fly Press for sale (41,014)

Condition: used, mileage: 178,000 km, power: 66 kW (89.73 HP), first registration: 06/2012, fuel type: diesel, overall weight: 2,240 kg, next inspection (TÜV): 06/2027, color: white, gearing type: mechanical, emission class: euro5, number of seats: 2, total length: 4,324 mm, total width: 1,795 mm, total height: 1,837 mm, Year of construction: 2012, Equipment: ABS, central locking, soot filter, For sale here is a well-maintained Ford Transit Tourneo Connect equipped with the globally popular 1.8-liter diesel engine. * The vehicle is in good condition! * New general inspection and emissions test (TÜV) valid until 06/2027 * German vehicle * Euro 5 emission standard * 2nd owner * Regularly serviced Equipment: * Panel van * Truck registration (N1 category) * Tow bar * 2 seats * Radio * Electric windows * Central locking * And much more... Technical data: * Gross vehicle weight: 2240 kg * Curb weight: 1468 kg * Payload: 772 kg * Trailer load: 1200 kg Iijdjy Skk Ropfx Ab Neb Why choose us? * Attractive financing options through our partner bank * Nationwide delivery of your desired vehicle * Trade-in of your old vehicle at fair terms * Transit plates (5-day / customs registration) usually available the same day * Pickup service from airport or train station All vehicles are professionally prepared and hygienically cleaned! Special features: Ozone interior and ventilation system disinfection. Two-stage exterior polish, including paint correction and smart repair where necessary. All our vehicles have also undergone thorough maintenance, of course including new fluids, filters, and other essential services, so you don't have to worry about a thing. Optionally, we can present the vehicle at an independent inspection center or workshop of your choice. We are happy to have caught your interest and are at your full disposal around the clock. If you have any questions, comments, or special requests, please do not hesitate to contact us! For more information and insights into our business philosophy, visit our website. Special equipment: Smoker package, sliding side door right Further equipment: 3rd brake light, overhead storage in cab, driver airbag, Audio system 6000 CD (radio/CD player), exterior mirrors mechanically adjustable from inside, electronic brakeforce distribution (EBD), rubber mats in passenger/cargo area, seat belt tensioners, rear wing doors without windows, heating with recirculation, body: panel van, bulkhead grille behind driver, steering column (adjustable in height), engine 1.8 l - 66 kW TDCi CAT, radio preparation, wheelbase 2665 mm, spare wheel with standard tire, low-emission according to Stage 5/Euro 5, gear shift indicator, headlights with delayed cut-off, side protection strips, driver’s seat adjustable (3-way), seat package 1 / 9, steel rims 6x15, tinted windows.

Condition: good (used), Year of construction: 2021, functionality: fully functional, pressing force: 58 t, Very good condition, fully functional, low operating hours, year of manufacture 2021, pressing force 58 tons. Iodpjyzw U Ujfx Ab Neib New price: seen for €19,500 Pressure cylinder has been dismantled for transport, inspection possible by appointment. Further presses in stock.

Year of construction: 2019, condition: ready for operation (used), A Flying Probe Tester Seica Pilot V8 Next Series with inline handling module on the left for vertical tilting of the PCB and inline handling module on the right for horizontal tilting and rotating of the PCB is available. Flying Probe Test System Seica Pilot V8 Next Series: PCB clamping system: manual, double-acting, manual active test area: 538x610mm, active test area: 518x610mm, PCB dimensions: 540x610mm, min. PCB size: 20x20mm, PCB thickness: 0.3 to 5mm, max. component height: 37mm, PCB loading: vertical, UUT edge clearance manual/automatic: 2/6mm, length: 1750mm, width: 1030mm, height: 1995mm, weight: 1.4t. Test tools/techniques: FNODE signature analysis on the nets of the unit under test, standard analog and digital in-circuit test, vectorless tests, JSCAN and OPENFIX to test ICs for opens and shorts, PWMON net analysis with power-on of the assembly, continuity tests to detect open connections on the assembly, visual tests for detecting component presence, component absence and rotation, high-resolution color camera, optional functional tests and boundary scan test capabilities, optional on-board programming tools for digital components, with complete documentation. An inspection on site is possible. Iodpjy Sv S Hefx Ab Noib

Condition: reconditioned (used), Year of construction: 2009, operating hours: 22,029 h, functionality: fully functional, pressing force: 80 t, filling opening width: 1,400 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 600 kg, overall weight: 16,000 kg, power: 75 kW (101.97 HP), year of last overhaul: 2025, volume flow: 300 m³/h, Technical data baler: Manufacturer Avermann Maschinenfabrik GmbH & Co. KG, Germany Type AVOS 1410-45/80 Year of construction 2009 Operation hours 22,029 hours, as of December 2025 Press power main press 80kN Specific press force 103,9 N/cm² Feed channel 1,400 x 1,000 mm Theoretic cycle time 12 sec Theoretic throughput capacity 300 m³/h Bale size 1,100 x 750 (w x h), the length is variable Drive power 45 kW Connected load 75 kW Tying system 4-fold, vertical, fully automatic Throughput capacity at a bulk weight of 30 kg/cbm approx. 6,0 t/h bulk weight of 50 kg/cbm approx. 10,5 t/h bulk weight of 100 kg/cbm approx. 17,5 t/h Bale weight with a bale length of approx. 1.2 m up to 600 kg, depends on material SPS controller Siemens S7-300 Operating panel pulsotronic Baler dimensions built up 8,610 x 2,400 x 3,835 mm (l x w x h) Transport dimensions 8500 x 2450 x 2950 mm (l x w x h) Transport weight baler approx. 16 t Iijdpfxey R Nnfo Ab Nob Special equipment: Wear-resistant floor made of HARDOX steel Special press ram for pressing ‘difficult’ materials and loose bulk materials with small grain sizes Control cabinet air conditioning Machine foot elevation 200 mm Remark: The machine was serviced and partially overhauled in our workshop. The following work was carried out and parts replaced: • Dismantling of the press ram, disassembly into individual parts, reconditioning of the mechanics, replacement of the following plastic wear plates and rails: o Plastic wear rails left/right under the press ram o Plastic wear rails left/right above the press ram o Plastic main wear plate (support plate) in the centre under the press ram • Steel guide rails on the left/right in the frame • Replacement of the entire base plate, four-piece, made of wear-resistant HARDOX steel • Wire inlet rails in the press floor newly welded and smoothed • Replacement of the counter blade, two-piece, in the frame • Adjustment of the blade gap to approx. 2.5 mm • Dismantling of the binding and twisting unit, disassembly into individual parts, loosening of the mechanics, replacement of all deep groove ball bearings and axial ball bearings on the twisting shafts, wire blades cleaned and readjusted, chains greased and tensioned • Support roller in front of the twisting shafts replaced • All hydraulic hoses replaced • Oil filter and air filter replaced • Main hydraulic cylinder checked for leaks • The hydraulic oil is only one year old, has been chemically analyzed, is still in good condition, and has therefore not been changed but can continue to be used. • General maintenance work carried out Finally, the press was subjected to a machine test in manual and automatic mode; see the video for the machine function test. Comments: The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagram) for the press is available.

Condition: used, Year of construction: 1964, machine/vehicle number: 63/10.2995-96, pressing force: 1,200 t, total length: 5,300 mm, total width: 2,690 mm, total height: 9,300 mm, overall weight: 360,000 kg, Press force: 1,200 tRam stroke: 600 mmRam adjustment: 500 mmStroke rate: approx. 10 – 16 strokes/minShut height: approx. 1,250 mmDrawing equipment:Drawing cushion force: approx. 240 tDrawing cushion stroke: approx. 250 mmPneumatic ejector in ram:Force: approx. 95 tStroke: approx. 150 mmTable size: approx. 3,500 x 1,900 mmHeavy-duty mechanical eccentric press in robust double-column design from Schuler, suitable for industrial applications as well as classical forming and deep drawing processes.The machine features a press force of 1,200 t with a fixed ram stroke of 600 mm and a ram adjustment of 500 mm. The stroke rate ranges from approx. 10 to 16 strokes per minute, allowing flexible use depending on the application.The working area is designed with a table size of approx. 3,500 x 1,900 mm, offering sufficient space for medium to large tooling.A key feature is the movable / sliding press table, which significantly simplifies setup and tool change and makes the machine ideal for handling heavy tools.The integrated drawing equipment (drawing cushion) provides approx. 240 t of force with a stroke of 250 mm, enabling demanding forming and deep drawing operations.In addition, the press is equipped with a pneumatic ejector in the ram (approx. 95 t / 150 mm), supporting automated part removal. Installation height max.: 1,250 mm Weight approx.: 360,000 kg Machine table clamping surface: 3500 x 1900 mm Passage between the uprights: 3,600 mm Serial number: 63/10.2995-96 Pressing force max.: 1,200 t Dimensions (LxWxH) approx.: 5300 x 2690 x 9300 mm Year of construction: 1,964 Condition: in working order Terms of payment: 100% prepayment before pick-up Isdpfx Aoy S Nhzjb Noib Terms of delivery: From foundation under power: Yes

Condition: good (used), Year of construction: 2007, frame press GOMA PHA 3500 Door Press hydraulic Location Gorzów Wlkp. Conditions of delivery OWN RECEIVING Cost of delivery to be negotiated Startup type to be negotiated Description Iododntc Nepfx Ab Njib Comments Working space 3500 x 2300 mm 1000kG (daN) pressure, engine at hydraulic unit 2,2 kW lenght 3500 mm hight 2300 mm weight 2000 kg agrageate hydraulic

Condition: used, Year of construction: 1977, pressure 25 t throat 250 mm stroke 400 mm Iiedpey Sliujfx Ab Neb table surface area 600x480 mm ram surface Ø135 mm table height 980 mm weight of the machine ca. 1,5 t dimensions of the machine ca. 2000x2000x2700 mm

Condition: excellent (used), Year of construction: 2006, Dimension: 2650 x 2100 x 2100 mm Clamping Force: 635 KN Working pressure: 206 bar Piston diameter: Ø200 mm Stroke: 140 mm Daylight: 150/180 mm Heating plant dimension: 250 x 300 mm Max. mass of heating plant: 70 kg Oil reservoir: 100 l Rated power: 19.66 kW Heater capacity: 9.6 kW Vacuum motor power: 2,6 kW Between light curtain and mould area: 270 mm Isdpfxey Snlxj Ab Nsib Stroke of vacuum cover: 140 mm The vulcanizing press from manufacturer PAN STONE, model S-V-65-2RT-PCD, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. The machine was part of a production line responsible for manufacturing high-performance seals used in various industries. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: good (used), Year of construction: 1987, functionality: fully functional, Clamping unit heating capacity, 1 heating rod / 8 heating rod: 0,48 / 0,9 kW clamping force: 2 x 500 kN heating plate dimensions: 550 x 600 mm piston stroke: 250 mm diameter of piston, main cylinder: 240 mm diameter of piston, locking cylinder. 39 mm locking cylinder: 260 mm Return capacity: 2 x 600 kN dimensions: 2600 x 2100 x 2100 mm weight approx.: 5 t Iiodey Snkbepfx Ab Nsb

Condition: good (used), Year of construction: 1994, Clamping Unit: Clamping force: 7,000 kN Operating pressure: 250 bar Specific pressing pressure: 610 N/cm² Number of levels: 2 Installation height with 75 mm heating plate & 20 mm insulating plate: approx. 2x 190 mm Piston stroke: approx. 400 mm Piston 1 diameter: 543 mm Clamping force, rapid traverse: approx. 2 x 85 kN Retraction force: approx. 2 x 47 kN Operating pressure: 300 bar Piston 2 diameter: 60/40 mm Stroke: 400 mm Estimated weight: approx. 16 tonnes Hydraulic System: Pressure adjustment: 40 - 300 bar Flow rate regulation: 0 - 99 % Flow rate l/min (HD): 45 against 300 bar Drive power: 22 kW Tank dimensions (LxWxH): 1000 x 770 x 535 mm Closing Speed: Rapid traverse: approx. 40 - 50 mm/s Slow closing: approx. 0 - 20 mm/s Pressing speed: approx. 0 - 3 mm/s Iijdpfsy Sni Rjx Ab Nob Slow opening: approx. 0 - 20 mm/s Opening, rapid traverse: approx. 0 - 60 mm/s

Condition: used, Year of construction: 2005, functionality: fully functional, Clamping force: 4900 kN Working pressure: 206 bar Heating plate dimensions: 700 x 700 mm diameter of piston: 558,8 mm max. stroke: 250 mm daylight: 300 mm max. mass of heating plant: 560 kg capacity of oil tank: 1100 l rated capacity: 82 kW heating capacity: 56 kW enginge output, vacuum motor: 4 kW Stroke of vacuum cover: 200 mm dimensions: 3975 x 2935 x 2555 mmm Equipped with a crane runway (monorail) with three chain hoists Producer: STHAL Year: 2011 Lifting capacity: 3 x 400 kg Lenght of crane runway: ca. 3500 mm Iisdpsy Sniwofx Ab Njb Rolling chassis Lifting capacity: 400 kg Lifting height: 3000 mm stroke speed - main stroke: 4 m/min stroke speed - fine stroke: 1 m/min The vulcanizing press from manufacturer PAN STONE, was used by a renowned German company specializing in sealing technology and electromobility. This company is known for its high quality and innovation in seal production. It was always professionally maintained and repaired, which explains its excellent condition. This press offers you the opportunity to invest in proven technology that was utilized by a leading company in Germany.

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Profiling line Dreistern P3.100 with mobile cut-off unit and accessories Machine bed features: Production direction: right to left Axle distance: 330 mm Isdpfx Aoy Sm Eqjb Njib 48 stations 44 stations can be driven (44 gearboxes) Quick-change plates Mechanical quick-release clamps Coolant piping 1 x 42 kW Baumüller motor 1 x 15 kW Baumüller motor Profiling frame features: Tool width per frame: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft (6 pieces with adjustable lower shaft) Axial adjustment Adjustment range of lower/upper shaft: 80 - 170 mm Gearbox features: Worm gear ratio 1:21 Lower/upper shaft gear ratio 1:1 Mobile cut-off unit features: Travel distance: 1900 mm Profile rail guidance Ball screw drive Bosch servo motor Valve block with punching unit Folding table length: 3000 mm Emergency stop Scope of delivery: Machine bed with gearbox support Infeed table Measuring wheel unit, pneumatic Straightening device Strip filter unit 800 liters Hydraulic unit for separator 44 gearboxes 44 profiling frames 2 Baumüller DC motors 66 universal joints The system operated flawlessly in production until it was dismantled at the customer's facility. Control system not included. Strip unwinder and perforation unit are also available from us as used machines. The system can also be easily extended with additional stations. We can support you with the following when reassembling the system: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, mileage: 28,050 km, power: 103 kW (140.04 HP), first registration: 01/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, tail-lift, Internal vehicle number: 5587DX ----Why autonext GmbH? One of the largest commercial vehicle showrooms in Germany – always over 400 vehicles immediately available Largest selection – Best price More than 1,000 satisfied customers per year – Top customer reviews Iodpfxjy Sdq Dj Ab Neib WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear impression now: See the vehicle inside and out via the YouTube link: Top condition! 1 owner, German vehicle, non-smoker vehicle Fully maintained service history, only at Volkswagen Next service in 219 days New front and rear brakes Tail lift "DHOLLANDIA" Max. 500kg Climatic air conditioning Lashing rails in cargo area On request, we can retrofit a reversing camera. On request, we offer retrofitting of a towbar for only €599; if possible, also a towing capacity upgrade up to 3.5t ----Special equipment: * Audio system Composition Audio (radio, SD card slot, MP3 playback) * Bluetooth mobile phone interface * Towbar preparation (socket and cables) * Trailer stabilization program * 2nd battery with battery monitoring * Exterior mirrors electrically adjustable and heated * Climatic air conditioning (driver's cab) * Hinges for rear doors with enlarged opening angle * Reinforced stabilizers * 12V sockets in load/passenger area (2) * High wood paneling in load/passenger area * Lashing rails in cargo area – sidewall-mounted Standard equipment: Driver’s side airbag, Anti-lock braking system (ABS), Drive type: front-wheel drive, Exterior mirrors convex, left; exterior mirrors convex, right; LED indicators integrated in mirrors, Rubber floor covering in cab, On-board tools, Underbody aerodynamic panel, Twin headlights, Entry handle on rear pillar left, Entry handle on rear pillar right, Electronic Stability Program (ESP), Driver assistance system: Hill hold assist, Driver assistance system: Brake assist (HBA), Driver assistance system: Crosswind assist, Electric front windows, Laminated windscreen, 2 folding radio keys, 6-speed transmission, Grab handles at A-pillars, Rear wing doors without windows, LED interior lighting in cab, LED interior lighting in load/passenger area, Body/build: high roof van, Body variant: high roof in vehicle color, Fuel tank: 75 liters, Radiator grille with upper chrome strip, Full-height partition without window, Adjustable steering column (steering wheel), Headlight range adjustment, Truck registration, Engine 2.0L - 103 kW TDI, Multifunction display Plus, Rear fog lamp, Wheelbase 3640 mm, Tire repair kit, Diesel particulate filter, Low emissions as per Euro 6d-TEMP, Sliding door load/passenger area right, SCR system (AdBlue technology), Electromechanical power steering, Seat upholstery: fabric, Cab seats: adjustable passenger seat, Cab seats: adjustable driver seat, Start/stop system, 12V sockets in cab (2), Front bumper in grey, Daytime running lights, Lashing eyes in load area, Seat belt warning system (driver’s side), Electronic immobilizer, Heat-insulating glazing, Central locking with remote control and interior switch, Permissible gross vehicle weight 3.50 t. ----Main inspection (HU)/emissions inspection (AU) new on request. ----Warranty & "TÜV Profi Check" naturally available from us.

Condition: used, mileage: 44,050 km, power: 103 kW (140.04 HP), first registration: 01/2021, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, emission class: euro6, number of seats: 2, total length: 5,986 mm, total width: 2,040 mm, total height: 2,590 mm, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Internal vehicle number: 5840X Iiodpfx Aboy Sdqwo Njb ----Why autonext GmbH? One of the largest commercial vehicle showrooms in Germany. Always over 400 vehicles immediately available at Top Selection – Best Price. More than 1,000 satisfied customers per year – Excellent customer reviews. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Get a clear impression now: Via the YouTube link, you can see the vehicle completely from the outside and inside. Top condition! 1 owner, German vehicle, non-smoker vehicle Fully documented service history exclusively with Volkswagen New brakes front and rear As-new all-season tires at the rear Tail lift “DHOLLANDIA” max. 500kg Climatic air conditioning Load securing rails in the cargo area Rear-view camera retrofit available on request. Tow bar retrofit available on request for only €599. If possible, an increase of trailer load up to 3.5t is also available. ----Special Equipment: * Audio system Composition Audio (radio, SD card slot, MP3 playback) * Mobile phone interface Bluetooth * Tow bar pre-installation (socket and wiring) * Trailer stabilization program * 2nd battery with battery monitoring * Electrically adjustable and heated exterior mirrors * Climatic air conditioning (cab) * Hinges for rear doors with increased opening angle * Reinforced stabilizers * Power sockets (12V) in the cargo/passenger area (2 units) * Cargo/passenger area lining: High wooden panelling * Load securing rails in the cargo area, sidewall-mounted Standard Equipment: Driver’s airbag, Anti-lock Braking System (ABS), Drive type: Front-wheel drive, Exterior mirrors convex left & right, LED indicators integrated in exterior mirrors, Rubber flooring in cab, On-board tools, CW value underbody cover, Twin headlamps, Grab handle at rear left & right pillars, Electronic Stability Program (ESP), Driver assistance system: Hill Start Assist, Driver assistance system: Brake Assist (HBA), Driver assistance system: Crosswind Assist, Power windows front, Laminated windshield, 2 folding radio remote keys, 6-speed transmission, Grab handles A-pillars, Rear wing doors without windows, LED interior lighting in cab and load/passenger area, Body/Structure: Standard high-roof box van, Body variant: High roof in vehicle color, Fuel tank: 75 liters, Radiator grille with upper chrome trim, High cargo partition without window, Adjustable steering column, Headlight range adjustment, LKW registration, Engine 2.0 L – 103 kW TDI, Multifunction display Plus, Rear fog lamp, Wheelbase 3,640 mm, Tire repair kit, Diesel particulate filter, Low-emission according to Euro 6d-TEMP, Sliding door right in cargo/passenger area, SCR system (AdBlue technology), Electro-mechanical power steering, Seat trim/upholstery: Fabric, Adjustable passenger and driver seats in cab, Start/stop engine system, Power sockets (12V) in cab (2 units), Front bumper in grey, Daytime running lights, Lashing eyes in cargo area, Seat belt warning system (driver side), Electronic immobilizer, Heat-insulating glazing, Central locking with remote control and interior activation, Perm. gross weight 3.50 t. ----New roadworthiness (HU/AU) upon request. ----Warranty & “TÜV Profi Check” naturally available.

Condition: used, Year of construction: 2003, functionality: fully functional, machine/vehicle number: 3599, total height: 2,600 mm, total length: 2,200 mm, total width: 2,200 mm, overall weight: 16,300 kg, pressing force: 100 t, passage height: 1,200 mm, passage width: 1,200 mm, Hydraulic press (previously used for lamination of door panels) Iijdpfowt Axcjx Ab Nsb Pressing area: 1300x1100 mm Press cylinders: 4x D110 mm Maximum pressing force: 1000 kN The machine is currently disassembled and was fully operational until it was taken apart. For an additional charge, two compatible heating plates including control cabinet are also available.

Condition: used, Flying profile cutting machine for Dreistern P3.125 with accessories Production direction: left to right Travel distance: 2000 mm Aluminum carriage with shaft recirculating ball guide Height adjustment via hydraulic cylinder and wedges Disc spring clamping of height adjustment, hydraulically releasable Low-backlash Graessner gearbox with Rexroth servomotor Folding table: Roller guide Hydraulically folding Rollers recessed in the table Dimensions: 380 x 6200 mm Accessories: 7.5 kW hydraulic power unit with cooler and accumulator Infeed roller guide Hole index detection Hydraulic valves on the carriage Punching unit Separation device Original documentation Iedpfxey Sldfe Ab Noib In perfect working condition until disassembly at the customer's plant. Control unit not included. For integration into an existing roll forming line, we can support you with: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, mileage: 96,000 km, power: 130 kW (176.75 HP), first registration: 06/1996, fuel type: diesel, tire size: 305-70 22.5, axle configuration: 4x2, fuel: diesel, suspension: steel-air, Year of construction: 1996, Equipment: electric window regulation, = Additional options and accessories = - 4x2 - Air suspension - PTO (power take-off) - Sun visor Iiodpfxey Rtwkj Ab Njb = Further information = Front axle: Tyre size: 305-70 22.5; Steered; Tyre tread left: 20%; Tyre tread right: 20%; Suspension: leaf spring Rear axle: Tyre size: 305/70 R 22.5; Twin tyres; Tyre tread left inner: 20%; Tyre tread left outer: 20%; Tyre tread right inner: 20%; Tyre tread right outer: 20%; Reduction: single reduction; Suspension: air suspension Damage: none

Condition: new, Year of construction: 2024, functionality: fully functional, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 175 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. Standard equipment Capacity (length - ton) 3050mm - 175t Installation height 530mm Outreach 450mm Stroke 265mm Servo drive Y1, Y2, X - 3 axles Control unit - DT 15 Manuel F. AKAS FPSC safety system CE-Fiessler Akas Servo motor backgauge & linear guide & Ball screw system Manual crowning European tool holder Sliding front arms Iiedpotr Dk Eefx Ab Nsb Options - DELEM 69S control unit (3D control) -Motorized crowning - 6 axes X=650mm Y1, Y2, X ,R , Z1, Z2 (6 axes controlled press brake) press brake) -Lower tool European M.460R.85 -European upper tool P135.75.R08

Condition: new, Year of construction: 2024, Discover the powerful Durma press brake at our demonstration center in Saerbeck. As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 175 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. Standard equipment Capacity (length X ton) 3050mm x 175t Installation height 530mm Outreach 450mm Stroke 265mm Y1, Y2, X - 3 axes Control unit - DT 15 Manuel F. AKAS FPSC safety system CE F.AKAS BVLT light barrier and safety cages (for tandem press brakes) Servo motor backgauge & linear guide & Ball screw system (X) Manual crowning European style tool clamping system Sliding front arms Hydraulic block and valves in special design according to worldwide standard -Electrical equipment according to worldwide standard Iedpfettatbex Ab Njib Selected options -Control unit - Delem 66S - NEW -Motorized crowning - X=650mm X,R, Z1, Z2 (6 axes controlled press brake) press brake) -Lower tool European M.460R.85 -European upper tool P135.75.R08

Condition: new, The DURMA AD-S 601000 is a powerful hydraulic press brake that ensures the highest precision and efficiency in sheet metal processing. With a pressing force of 1000 tons and a working length of 6 meters, it is ideal for demanding applications, especially when processing large and thick materials. Technical details: - Model: DURMA AD-S 601000 - Pressing force: 1000 tons - Working length: 6 meters - Control: SKY22 (3D control) - Back stop: 6 axes (X1, X2, R1, R2, Z1, Z2) - Bending aid: AP3-AP4 integrated for optimized handling of heavy workpieces - Condition: As good as new, available immediately Features and advantages: Iijdpfx Absvwm A Ij Njb - High bending accuracy thanks to the latest CNC control - Robust construction for a long service life - Flexibility thanks to the 6-axis back stop control - Support for heavy and large sheets thanks to integrated bending aid The machine is available immediately and can be inspected on request. We are happy to provide you with further information or to arrange an appointment.

Year of construction: 2024, operating hours: 32 h, condition: new, Make: DURMA Type: AD-S 30175 Year of construction: 2020* bending length: 3050 mm Press force: 1750 kN Control: DELEM DA-66T Operating hours: 32 h Controlled axes Backgauge: X,R,Z1,Z2,+Delta X +/- 125 mm CNC controlled passage between the uprights: 2600 mm stroke length: 265 mm Installation height: 530 mm table width: 104 mm table height: 900 mm Stands projection: 410 mm travel range X-axis: 650 mm traverse speed X-axis: 500 mm/s travel range R-axis: 250 mm infeed speed: 160 mm/s folding speed: 10 mm/s Retraction speed: 100 mm/s Dimensions L/W/H: approx. 4250x1700x2750 mm Weight: approx. 11500 kg Standard equipment Y1,Y2,X,R - X=650 mm Control: CNC Cybelec ModEva 19T - PC 1200 3D SW D-BEND 3D CAD/CAM import & simulation program CNC controlled motor-driven crowning European tool clamping system 60 mm die holder (only for European die system) Throat 410 mm 2 support arms movable from the front with T-slot and tilt stop Backgauge system: Siemens DC Servo motorized with linear guide and ball screw Protective covers CE Marking Extended equipment Safety system CE standard for EU: FIESSLER AKAS-3P motorised+FPSC (SAFETY PLC) Controlled axes Backgauge: X,R,Z1,Z2,+Delta X +/- 125 mm CNC controlled Control: DELEM DA-66T Ijdpsdx Nluefx Ab Neib Hydraulic top tool clamping Wila NSCL-II-HC/UPB - PREMIUM - 250 t/m Hydraulic bottom tool clamping Wila NSCR-II-HC-CNC/UPB - PREMIUM - 300 t/m Powerpack for hydraulic clamping AP3-AP4 Bending aid -

Year of construction: 2024, condition: new, The DA-69T control offers both 2D and 3D programming, which includes automatic calculation of the bending sequence and collision detection. The entire 3D machine setup includes multiple tool stations and provides immediate feedback on product feasibility and handling. DA-69T features: - 3D- and 2D- graphical touch screen programming mode - 3D representation in simulation and production - 17-inch TFT colour display with high resolution - Complete Windows Application Suite - Compatible with Delem Modusys (module scalability and adaptivity) - USB, peripheral interface - Open system architecture - Sensor Bending and correction interface - Profile-T3D offline software - great contribution to environmental protection, climate change and the greenhouse effect will thank us, the next generation will thank us too! - Fully electronic drive - Up to 30% higher productivity - Up to 50% energy savings through Start-Stop technology - Faster than hydraulic press brake - Reduced operating costs - Much lower service and spare parts costs (the electric press brake is technically much simpler and almost maintenance-free) - No harmful oil Ijdpfjd Sak Ssx Ab Njib - quiet - efficient - independent of Hyd. Oil - Low noise operation - relaxed and stress-free bending - Complete work area - Touchscreen operation Machine dimensions: ( L x W x H ): 2.150 mm x 1.650 mm x 2800 mm Technical details: bending length: 1.250mm Free stand passage: 1.300 mm Press

Year of construction: 2024, condition: new, Here a new AD-R 37220 is offered:Bending force: 220 tonsBending length: 3700Pass between uprights: 3100 mmHub: 265 mmInstallation height: 530 mmExtension: 410 mmTable height: 900 mmTable width: 104 mmY Fast speed: 160 mm/sec.Y Working speed: 10 mm/sec.Y Withdrawal speed: 120 mm/sec.X axes Working speed: 250 mm/sec.R axes Working speed (manual): 250 mm/sec.R axes Travel: 250 mm/sec.X axes Distance: 650Length: 4950 mmWidth: 1770Height: 2900Total weight: 14100 kgOptions:CE with manual F.AKAS II M -FPSC-B-C Safety cover Iiedped S I R Tsfx Ab Njb

Year of construction: 2024, condition: new, Everything is configurable on demand, very short production & delivery time. We will be happy to provide you with further information on request. Technical data: AD-R 60400 Bending force: 400 tons bending length: 6050 mm passage between the uprights: 5100 mm stroke: 365 mm Installation height: 630 mm Abroad: 510 mm Optional foreign diameter: 750 mm | 1000 mm | 1250 mm table height: 1220 mm table width: 154 mm Isdpfx Aofin Hwob Nsib Y Fast speed: 120 mm/sec. Y Working speed: 8 mm/sec. Y Retraction speed: 100 mm/sec. X axes working speed: 250 mm/sec. R axes working speed: 140 mm/sec. R axes travel: 250 Engine power: 37 kW length: 7500 mm width: 2110 mm height: 3710 mm Weight approx. 35 tons With more than 60 years of experience in research and production of machines for sheet metal working, 8,000 machines produced annually in three technologically advanced production facilities covering a total area of 150,000 m², the Durmazlar Group and its DURMA machines are today among the internationally renowned manufacturers in their sector, whose products are sold in 120 countries. With the branch in Staufenberg near Gießen, Durma Maschinen GmbH is now an important part of the Central Hesse region. Here here we are your direct contact person from the ranks of Durmazlar, who will competently assist you with advice and practical support when it comes to machines for sheet metal processing. Our demonstration center gives you the opportunity to get an overview of our

Condition: new, Year of construction: 2025, functionality: fully functional, operating hours: 30 h, ✅ 1. Metalworking companies with medium to high volumes 🔹 Series production / repeat parts If you produce many identical or similar parts, automation pays off as it reduces the cost per part and ensures consistent quality. 🔹 High production > 1,000 parts/month The higher the output, the faster the investment pays for itself through increased productivity. ✅ 2. Companies facing skilled labor shortages or high workloads 🔹 Difficulty finding or retaining qualified staff A robot can partially replace skilled operators and safeguard production capacity. 🔹 Night shifts / 24/5 production Robots can work longer and without fatigue → higher output without additional personnel. ✅ 3. Companies with complex bending processes or high quality requirements 🔹 Tight tolerances / minimizing errors A robot ensures consistent repeatability. 🔹 Complex downstream processes (e.g. handling, deburring, stacking) An integrated robot can take over tasks that would otherwise be performed manually. ✅ 4. Manufacturers facing tight deadlines or cost pressure Short delivery times required Automation reduces throughput times. 🔹 Cost pressure due to competition Longer machine utilization and lower unit costs improve competitiveness. Iiedpeyb I Azsfx Ab Neb ✅ 5. Future-oriented companies 🔹 Industry 4.0 / digitalization An automated press brake can often be integrated more effectively into IT/MES systems. 🔹 Scalable production If you plan to grow in the future, you have a flexible foundation.