Used Hedelius C80/2300/8 for sale (36,715)

Condition: used, mileage: 19,000 km, power: 100 kW (135.96 HP), first registration: 05/2000, overall weight: 7,495 kg, fuel type: diesel, color: red, next inspection (TÜV): 10/2026, gearing type: mechanical, emission class: euro2, loading space width: 2,290 mm, loading space length: 2,870 mm, loading space height: 1,600 mm, Year of construction: 2000, total length: 6,430 mm, total width: 2,400 mm, total height: 2,960 mm, number of seats: 9, Equipment: ABS, parking heater, 1st owner. Small volunteer fire department vehicle, directly from active service. Decommissioned 07/2026. Original, with only slightly over 19,000 total kilometers driven. Last service and TÜV (German vehicle inspection) at 18,138 km "without any detected defects". Service always performed at the local Iveco/Fiat authorized workshop, consistently until recently. 9 seats. WEBASTO AirTop 32 S auxiliary heater. Fire engine LF 8/6 with MAGIRUS body from 2000. 600-liter water tank. With tank heating. Rear pump FP 8/8 with 118 operating hours. Light mast between the body and the cabin. 24-volt and compressed air supply at the driver's side step. Iveco 4-cylinder in-line diesel engine with 3908 ccm, Euro 2, which starts and runs perfectly. 6-speed manual transmission. Differential lock on the rear axle. 86 km/h top speed according to the documents. Robust truck chassis with leaf spring suspension. Power steering. ABS and ASR. Radio. Electrically adjustable exterior mirrors. Unladen weight according to the documents: 5035 kg. Permissible total weight: 7495 kg. Overall vehicle dimensions: Length: 6430 mm / Width 2400 mm / Height 2960 mm. The box body has an internal dimensions of approximately 2.87 m long / 2.29 m wide / 1.60 m high. Roof is walkable with a large toolbox on the left; the toolbox lid is easily operated with gas springs. Swappable trailer hitch with 2000 kg towing capacity (braked) or 1500 kg (unbraked) (ball and pintle hitch). Lrodpfezpgphex Aa Rer Tires: MICHELIN with snow flake symbol, DOT 2020. Size: 205/75R17.5. Condition: 6 tires, almost new. Batteries 2x NEW in 2025. Prepared for digital radio communication. The special signal system with front flashing lights is functional. The Martin horn has been removed and is no longer available. The fire engine has minor signs of wear and is generally well-maintained. The vehicle was handed over to us in operational condition after being taken out of service. The Iveco with MAGIRUS Weisweil body is immediately available here. The necessary manuals with wiring diagrams and some documents are included; the service booklet was only filled out at the beginning, but all essential original documents from Iveco are available. There are 2 original Iveco vehicle keys that work easily and identically in all 4 doors and also in the ignition lock. The equipment compartment locks and flaps are all easy to operate. The Iveco recently received some new parts. According to the mayor, this vehicle has not been involved in any accidents. It was recently replaced with a new vehicle according to plan. The vehicle is expressly offered here as an "operational vehicle". If the vehicle is not to be used again as an operational vehicle in the future, then the special signals must be completely removed and all vehicle markings must be removed. This offer applies only to commercial enterprises, freelancers of all kinds, as well as to authorities and emergency services of all kinds. Sale to private individuals is excluded. Subject to prior sale and errors. The offer is subject to §25a UStG / differential taxation. This means that no VAT can be calculated separately. At the same time, no VAT will be added to the purchase price. (A regular invoice will of course be issued even with differential taxation. For commercial buyers, such as industrial fire departments, it can alternatively be invoiced including VAT if required.)

Condition: used, Year of construction: 2008, functionality: fully functional, Equipment: documentation/manual, Tornos lathe Ledpfx Aaozp E D Re Rjrr Fanuc CNC control Micro 7 model Year 2008 IEMCA bar feeder ELITE 112 model Type 32L Year 2010

Condition: like new (used), functionality: fully functional, machine/vehicle number: ST 1005-8/2 1/1, Year of construction: 2021, lifting height: 8,000 mm, chain length: 9,000 mm, load capacity: 500 kg, lifting speed: 133 mm/s, fine lifting speed: 33 mm/s, type of input current: three-phase, The overhead crane is in like-new condition and has been used very little. The chain is well-maintained and greased. Manufactured and calculated by Ralf Brinkmann GmbH. Transport within Switzerland and export can be arranged; the buyer bears the costs. Technical data: Load capacity: max. 500 kg Runway type: IPE runway beam Runway length (fixed): 12,000 mm Runway length (movable): approx. 9,595 m of which 4,615 mm (extending from the building) System consisting of: 12.00 m IPE runway beam for attachment to the existing concrete ceiling (2 pieces of 6,000 mm each with connecting elements) - Mounting plate on top - 9.59 m IPE runway beam, for movement on the "ceiling rail". intended for attachment via the following travel units. Additionally, it has two counter-pressure rollers, at the rear. Eyelet for attaching the hand trolley to be able to retract the telescopic rail, at the rear end of the telescopic rail. 2x hand travel unit for manual movement of the telescopic rail 4x set of end stops (stoppers) designed as bolted angles 2x C-rail system / cable management system for supplying power to the electric chain hoist / electric travel unit (no ideal control!) 1x hand trolley, for retracting the telescopic rail. 1x STAHL Crane Systems electric chain hoist ST 1005-8/2 1/1 Manufactured according to the rules of the EC Machine Directive, Device Safety Act, and BGV. Lifting mechanism operating mode according to DIN EN 13001-2: HD1 Motor classification (FEM/ISO): M4 Load-bearing component classification (FEM/ISO): M5 Protection type EN 60529: IP55 Designed for operation in an indoor environment, ambient temperature -20 to +40°C Lifting mechanism load capacity 500 kg Lifting height 8.00 m Lifting speed 2.00 / 8.00 m/min Power (nominal) 0.20 / 0.80 kW Design data, see product information / motor data sheet Duty cycle 20 / 40 % Load chain galvanized Travel unit electric travel unit, short overall height Travel speed 5.0 / 20.0 m/min Power 0.07 / 0.32 kW Duty cycle 20 / 40 % Flange width 200 mm Electrical system Contactor control Operating voltage 400 V Control voltage 48 V System frequency 50 Hz Control unit STH incl. 6.80 m control cable Paint finish Hoist - Topcoat polyurethane 80 µm Topcoat lifting mechanism in RAL 7021 color, Lredpfx Aozn H Twoa Rer black gray Topcoat control box and fan cover in color RAL 6018, yellow-green Note: Overload protection and emergency lowering by slip clutch (must not be operated under normal conditions) Equipment - Travel switch on both sides - Lifting end switch for upper hook position - Guide for cable-mounted power supply, 505 mm - Radio remote control with emergency control unit STH (transmitter Quadrix, receiver FSE308 with integrated horn (91 dB) and signal light, charger, replacement battery, belt clip, adhesive symbols) Documentation: - Installation declaration according to Directive 2006/42/EC for machinery - Test book - Load capacity labeling according to UVV standards - Operating manual for cranes Currently, the crane is disassembled and stored in a hall in Switzerland, near the German border.

Condition: used, machine/vehicle number: 007276, Max. panel width: 800 mm Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Lrodpjt H Tx Dofx Aa Rsr Lifting capacity: 4500 Kg

Condition: used, machine/vehicle number: 006432, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Ljdpfx Aot Hmq Hea Rjrr Max feed speed: 25 m/min Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: used, machine/vehicle number: 007275, Max. panel width: 800 mm Lsdot H Tvvjpfx Aa Rsrr Max. panel length: 2500 mm Max. panel stack height from the ground: 1650 mm Lifting capacity: 4500 Kg

Condition: used, functionality: fully functional, empty load weight: 2,580 kg, Year of construction: 2011, load capacity: 8,000 kg, Heavy-duty trailer Condition: Ready for operation and fully functional Technical condition: Good Description: Tandem trailer – 2-axle trailer MÜLLER MITTELTAL ETS-TA-B 10.7 – payload 8,000 kg – unladen weight 2,580 kg – permissible total weight 10.7 tons – galvanized low-loader with sturdy (mechanical) access ramp, ramp length approx. 2m – lighting system 12V – internal loading area length 5.50 m – internal width 2 m – total length incl. drawbar 7 m – loading height 60 cm – side walls approx. 35 cm high – good tires Lrodszqxh Eopfx Aa Rjr

Condition: used, mileage: 395,000 km, power: 368 kW (500.34 HP), first registration: 04/2009, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: white, gearing type: automatic, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, crane, Manufacturer Scania Model R500 8X4 EFFER 1355 8/S Winch Euro 5 Year 2009 Condition Good Serial Number XLER8X40005216034 Ref. nr. 218159 Reg. date: Engine: V8 Hk: 500 Km: 395000 Gearbox: Opticruise GRS905 Eurotype: 5 Diesel tank: 1 Tank liter: 350 Mirror camera: ? Rear view camera: ? Cabin heater: ? Air conditioning: ? Number of beds: 1 Cabin type: CR19 Leather seats: ? Radio: ? Refrigerator: ? Disc brake: ? ABS: ? Engine brake: ? Tire Size: 385/55 - 385/55 - 315/70 - 315/70 Lodpfxezqxt Io Aa Rerr Cover% left 60 - 60 - 40 - 80% Front suspension: Air Suspension rear: Air Wheelbase: 4300 mm. Toolbox: ? Total weight: 32000 kg. Net weight: 26000 kg. Crane Manufacturer: EFFER 1355 Tonsmeter: 135 Remote control: ? Year: 2008 Extension extension (hydraulic): 8 Deferral extension (manual): 1

Condition: good (used), Three-phase motor, electric motor -Manufacturer: ADDA, Electric motor type C160L-8/6 -Power: 3.5 kW -Speed: 720 rpm -Shaft: Ø 42 x 110 mm -Design: B3 -Protection class: IP 55 -Number: 3x motors available -Price: per piece -Dimensions: 635/320/H410 mm Lodev Inflepfx Aa Rorr -Weight: 87 kg/unit

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 3 h, machine/vehicle number: SX8T_8, pressure (max.): 8 bar, Exhibit: Compressor Kaeser SX 8 T (8 bar) with integrated dryer with SIGMA CONTROL 2 Year of construction: 2024 Operating hours: 3 Bh Lrsdsvntmuspfx Aa Rer Techn.Daten: Volume flow at 8 bar: 0.80 m³ / min Motor power: 5.5 kW pressure dew point: +3°C Electrical connection: 400 V / 3/50 Hz Dimension W x D x H: 590 x 915 x 970 mm Weight: 200 kg Connection compressed air: G 3/4 " Sound pressure level: 64 dB (A) Visit our store in Erlangen. On more than 450 square meters of exhibition space you will find a large number of used and new compressors

Condition: used, Year of construction: 2004, functionality: fully functional, working width: 230 mm, planing height: 160 mm, spindle diameter: 40 mm, planing width: 230 mm, working height: 160 mm, total width: 230 mm, total length: 5,000 mm, overall weight: 6,600 kg, spindle speed (max.): 8,000 rpm, spindle speed (min.): 8,000 rpm, rotational speed (min.): 8,000 rpm, workpiece height (max.): 160 mm, workpiece width (max.): 230 mm, input voltage: 400 V, table length: 2,500 mm, shaft diameter: 40 mm, number of spindles: 8, extraction connection diameter: 140 mm, Equipment: motor brake, WEINIG profiler, model Powermat 1000, equipped with: lower horizontal shaft, right spindle, left spindle for all widths, right spindle, upper horizontal shaft, lower horizontal shaft, upper horizontal shaft, lower horizontal shaft. CNC on left spindle, upper horizontal shafts, finishing lower horizontal shafts. 8,000 rpm motors, equipped with PowerLock, 80 mm spindle stroke, metric counter of produced linear meters, grooved table, feed speed: 36 m/min. Lrodpfxey Aywue Aa Ror

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 2 h, machine/vehicle number: 101957.01, Exhibit available immediately: New Kaeser SK 25 - 8 bar screw compressor Controller SIGMA CONTROL 2 Pressure: 8 bar Nominal power: 15 kW Lodev Ammkjpfx Aa Rorr Delivery rate: 2.52 m³ / min Sound level: 67 dB (A) Compressed air outlet: 1 " Dimensions length x width x height: 750 x 895 x 1260 mm Weight: 320 kg Operating hours: 2.0 Visit our store. We always have a large selection of new and used compressors in stock!

Year of construction: 2021, condition: excellent (used), used 7.5 kW screw compressor ALMIG with integrated refrigeration dryer and 270 liter compressed air tank and time-controlled steam trap and Controller Air Control mini Type: COMBI 8/270D Year of construction: 2021 Hours: 2600 Operating pressure: 10 bar (ue) Delivery quantity at 10 bar (ue): 1020 liters / min Installed motor power: 7.5 kW Protection class / insulation class drive motor: IP 55 /ISO F Operating voltage: 400V ~ 50 Hz Sound pressure level (EN ISO 2151): dB (A) 64 Compressed air connection: G 3/4 " Lodpfoiqym Hsx Aa Rsrr Length: 1180 mm Width: 770 mm Height: 1680 mm Weight: 460 kg Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 20,600 kg, maximum load weight: 5,400 kg, overall weight: 26,000 kg, axle configuration: 6x2, wheelbase: 5,550 mm, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 6,340 mm, loading space width: 2,480 mm, loading space height: 500 mm, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, crane, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, Lg. Haus. Features include: 1x comfort seat, 1x sleeper berth, seat heating, electric mirrors, heated mirrors, left and right electric windows, air conditioning, sun visor, radio-CD, cruise control, navigation system, auxiliary heater, ABS (anti-lock braking system), traction control (ASR), retarder, power take-off, automatic transmission, hydraulic lifting and lowering, differential lock, fog lights, work lights, rotating beacon, storage box, air suspension, trailer coupling with air and electric connectors, aluminum fuel tank, steerable and liftable rearmost axle (hydraulically steered), lashing rings, container locking system, underrun protection, side aluminum underrun protection, swinging tailboards, roof hatch, rear-mounted crane, emergency stop, grab control, folding type, 4-point hydraulic outriggers, radio remote control, 8x hydraulic extensions, green environmental sticker. Wheelbase: 5,550 mm. Body: flatbed body with aluminum side panels, TwistLock locks for 20" containers, rear-mounted Hiab X-HiPro 548 E-8 crane, radio remote, 8.5t front axle, ABS, EBS, full emergency braking assistant, Eco retarder, disc brakes on front and rear axles, MAN EasyStart hillholder, emergency braking signal, MAN TipMatic 12.26 DD gearbox with retarder 35, steered and liftable trailing axle, stabilizer on front and rear axles, LED daytime running lights, cornering light, high beam assistant, 4kW additional water heater, lower sleeper berth, refrigerator, ESP, ASR, lane departure warning, driver alert system, MAN Media System Navigation Professional, NTX/10c auxiliary drive. Ljdpozbiy Uefx Aa Rorr Load diagram: 2.2 m – 18,000 kg; 4.6 m – 9,900 kg; 6.1 m – 7,200 kg; 7.8 m – 5,300 kg; 9.6 m – 4,100 kg; 11.4 m – 3,300 kg; 13.4 m – 2,680 kg; 15.5 m – 2,240 kg; 17.5 m – 1,940 kg; 19.6 m – 1,720 kg! Loading height approx. 1,200 mm! Winch available for an additional charge (€25,000 net)! A detailed specification is available on request. New vehicle from stock with day registration 09.08.2023. Accessories information provided without guarantee; subject to change, prior sale, and errors excepted.

Condition: like new (used), Year of construction: 2019, Krauss Maffei KM 2300-12000 MX Injection Moulding Machine Year of manufacture: 2019 🏭 Manufacturer: Krauss Maffei Machine type: KM 2300-12000 MX Clamping system: fully hydraulic Control: MC5 – industrial computer with integrated 19” colour touchscreen display 🔧 Clamping unit Clamping force: 23,000 kN Maximum mould opening force: 1,610 kN Platen dimensions (W × H): 2,850 × 2,450 mm Ljdpfswxdrbex Aa Rsrr Tie bar clearance (W × H): 2,020 × 1,620 mm Opening stroke: 3,000 mm Mould height (min.–max.): 800 – 1,800 mm Maximum daylight: 3,800 mm Ejector stroke: 400 mm Ejector force: 400 / 200 kN 🧩 Injection unit Screw diameter: 105 mm Injection pressure: 2,296 bar Shot volume: 5,195 cm³ Shot weight (PS): 3,689 g Screw speed (standard): 103 rpm Plasticising rate (PS): 241 g/s Nozzle radius: 28 mm Nozzle orifice: 8 mm ⚡ Electro-hydraulic equipment Pump motor power: 132 kW Heater power: 93 kW Number of cylinder heating zones: 7 Dry cycle time (Euromap 6): 8.2 s Oil tank capacity: 2,440 l 📐 Dimensions and weight Net weight with control cabinet: 121 t Machine dimensions (L × W × H): 14.42 × 4.39 × 3.44 m

Condition: used, Year of construction: 2005, 2005 | Iveco Trakker AD410T44 8×4 | Used Tipper Truck | 395935 kms 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 35400 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 45 inspection points 40 approved ✅ 5 imperfect ℹ️ 0 issues ⚠️ Lrodpfjzrm Dkex Aa Rsr 📌 Inspector's Comment: Good overall and operating condition. See detail below. Technical checks up to date until February 5, 2027. 13-liter engine with high torque, the gearbox works very well. Disc brakes on axles 1 and 2 (good condition) and drum brakes on axles 3 and 4. Trailer socket for signaling and ABS (no brake handles, GTWR 40T). The vehicle is first-hand with a complete history. Recent repairs: cylinder head gasket, flywheel, and clutch kit at 394360 km; gear linkage and steering ball joints at 373171 km; starter at 383861 km; axles and bushings for pivots on axles 1 and 2 at 297850 km. Gearbox overhaul at about 250000 km. Round dump body length 5800 mm. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40818 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Year of construction: 2006, condition: used, Complete Automatic PET Edible Oil Bottling and Packaging Line – 8,000 Bottles/Hour Lrjdpfx Aaozmd Uis Ror Complete fully automatic production and packaging line for filling edible oil into 1.0 L PET bottles, with a production capacity of approximately 8,000 bottles per hour. Our asking price is EUR 520,000 net, ex works Shtip, North Macedonia. The price is negotiable, and we are open to considering reasonable offers. The line covers the complete production and packaging process, from PET preforms to finished automatically palletized products. The complete line includes: SIAPI EAS 50.100/8 – PET stretch blow moulding machine, 8 cavities Bottle air conveyor and conveying system AVE Industries RVM 30/8 – filling and capping monoblock, 30 filling stations and 8 capping stations Nitrogen injection system Bottle conveyor system AVE Industries 8T H/M E1 – automatic labelling machine AVE Industries CP3-20 – automatic shrink wrapping / packaging machine with heat tunnel Conveyor systems AVE Industries PABR-80 – automatic palletizing system Main specifications: Application: Edible oil Bottle material: PET Bottle size: 1.0 L Line production capacity: approx. 8,000 bottles/hour Main equipment year of manufacture: 2006 Fully automatic production and packaging line The equipment is offered as a complete integrated production line for PET bottle blowing, edible oil filling, capping, labelling, shrink wrapping and automatic palletizing. The complete line is currently installed, in operation and fully functional. Interested buyers can inspect the line and see it running under actual production conditions by prior arrangement. The line is located in Shtip, North Macedonia. Additional technical documentation, photographs and videos of the equipment are available upon request. The complete line is offered for sale as one unit.

Condition: used, machine/vehicle number: 008244, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Laser Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Lredox Swgfepfx Aa Rer Maximum panel thickness: 60 mm Operating Units: 8 nr

Year of construction: 2007, condition: used, Second-hand machine Second-hand ISC mobile piston compressor, type P-K 270/8/50 Part No.: 2007/12 006769 Year of manufacture: 2007 Motor power: 1.8 kW Motor speed: 2,850 rpm Lodpfx Aezk Nv Tea Rerr Flow rate: 270 l/min Max. pressure: 8 bar Tank capacity: 50 l Availability: at short notice Location: Solingen

Condition: new, Year of construction: 2026, Professional 8-Ton Log Splitter – Robust Construction and Long Service Life The professional 8-ton log splitter is designed for efficient wood splitting with maximum reliability and durability. Its solid construction and high-quality splitting wedge ensure long service life and trouble-free operation. The machine is intended for splitting logs with a diameter of up to approximately 450 mm. Its stable and robust design provides excellent performance and consistent results. The splitter is equipped with a hydraulic cylinder featuring an automatic piston return function, ensuring smooth and efficient operation. Device description Side support tables included – make feeding and positioning logs easier. Powerful and reliable 230 V electric motor – rated power of 3.0 kW, with temporary power increase up to 3.5 kW during heavy-duty operation. Safe operation compliant with EU standards – equipped with a two-hand control system for increased operator protection. Hydraulic system filled with 4 litres of oil – the machine is ready for immediate operation after purchase. Angled splitting wedge – improves wedge penetration into the wood. 4-way splitting wedge included as standard – allows splitting logs into four pieces in a single operation. Adjustable stop rod – allows the return height of the wedge to be set according to user requirements. Hydraulic oil level indicator – enables easy monitoring of the oil level. Lredpfx Aeridpaea Rsr Transport wheels – provide convenient movement of the machine. Operating manual included. Comfortable transport handle – simplifies handling and relocation. Recommended hydraulic oil viscosity: HL32. The original, reliable hydraulic pump ensures long-lasting and maintenance-free operation. Reliable hydraulic pump! Technical specifications Parameter Value Motor 3 kW (4.1 HP) / 230 V Splitting force 8 tons Maximum log length 520 mm Log diameter range 80–450 mm Wedge feed speed 0.029–0.04 m/s Wedge return speed 0.15 m/s Maximum hydraulic pressure 265 bar Hydraulic oil tank capacity 4 l Overall dimensions 1070 × 800 × 1500 mm Weight 120 kg

Condition: new, Year of construction: 2026, Professional 8-Ton Log Splitter – Robust Construction and Reliable Performance The professional 8-ton log splitter is designed for efficient and safe wood splitting. Its solid construction and high-quality splitting wedge ensure long service life and reliable operation. The machine is designed for splitting logs with a diameter of up to approximately 450 mm. Its stable and durable construction guarantees excellent working results even under demanding conditions. The log splitter is equipped with a hydraulic cylinder featuring an automatic piston return function, ensuring smooth and efficient operation. Device features Side support tables included – make loading and positioning logs easier. Reliable and powerful 230 V electric motor – 3.0 kW power, with the ability to temporarily increase output up to 3.5 kW during heavy loads. Safe operation compliant with EU standards – equipped with a two-hand control system for maximum operator safety. Pre-filled hydraulic oil system (4 litres) – ready for immediate use after purchase. Angled splitting wedge – improves penetration into the material and reduces splitting resistance. 4-way splitting wedge included – allows logs to be split into four pieces. Adjustable stop rod – enables setting the wedge return height according to the user's needs. Hydraulic oil level indicator – allows quick monitoring of the oil level. Transport wheels – provide convenient mobility. Operating manual included. Comfortable transport handle – makes moving the machine easier. Recommended hydraulic oil viscosity: HL32. The original, reliable hydraulic pump ensures long-lasting and trouble-free operation. Reliable hydraulic pump! Technical specifications Parameter Value Motor 3 kW (4.1 HP) / 230 V Splitting force 8 tons Maximum log length 520 mm Log diameter range 80–450 mm Wedge travel speed 0.029–0.04 m/s Lsdpfewymwcox Aa Rerr Wedge return speed 0.15 m/s Maximum hydraulic pressure 265 bar Hydraulic oil tank capacity 4 l Overall dimensions 1070 × 800 × 1500 mm Weight 120 kg

Condition: used, TECHNICAL DETAILS - bar clearance : 5-20 [mm] - maxi part length (without counter operation) : 100 [mm] - maxi part length (with counter operation) : 80 [mm] - spindle rotation speed : 5 000 [rpm] - spindles maxi power : 15 [kW] - drilling/tapping maxi power : 3.7 [kW] Lrsdpjuhaq Ujfx Aa Ror - number of numerical axes : 23 - number of cross slides : 8 - counter operation slide : 1 - end units : 7 - number of sub-spindle : 1 - sub-spindle motor power : 1.1 [kW] - dimensions : 5880 x 1400 x 1950 [mm] - weight : 7 200 [kg] EQUIPMENT - TORNOS PNC DECO control - HIRTH teeth drum locking - high pressure pump - chips conveyor - turning tools-holders - IEMCA PRA 40/33F bar feeder - number of hours 31600

Condition: used, TECHNICAL DETAILS - Pressure : 4 [t] - Execution : * number of mounts : 2 - Fix table : * length : 210 [mm] * width : 210 [mm] - Press frame : fix - Hole in the table : diameter 80 [mm] - Number of punches : from 50 to 150 [p/min] - Adjustable slide : 40 [mm] - Fix travel : 27 [mm] - Max height for tooling : 148 [mm] - Passage through mounts - Longitudinal : 230 [mm] - Electric connection : 380 [Volt] - Total installed power : 0.75 [CV] - Weight : 640 [kg] - Floor space (length x depth x height) : 1100 x 1000 x 1500 [mm] Lsdpfxjuhakbs Aa Rsrr

Condition: new, operating pressure: 2,000 bar, high-pressure hose length: 10,000 mm, fuel: diesel, overall weight: 243 kg, warranty duration: 24 months, temperature: 80 °C, TECHNICAL DATA OF THE KARCHER HDS 8/20 D WASHER: Model: HDS 8/20 D Series: Professional Condition: NEW Lodpfov Tafbsx Aa Rerr Thread type: KARCHER !EasyLock series Drive: DIESEL engine Pressing capacity (l/h): 800 Working pressure (bar/MPa): 200 Maximum water temperature (°C): 80 Fuel consumption (kg/h): 5.9 Fuel tank (l): 30 Weight (kg): 243 Dimensions (length x width x height) (mm): 1130 x 910 x 920 EQUIPMENT OF THE KARCHER HDS 8/20 D WASHER: Pressure gun: Karcher Professional !EasyForce Advance High-pressure hose: Karcher Professional - Longlife series 10M, DN8, 315BAR - !EasyLock Spray lance: Karcher Professional 1050 mm !EasyLock Nozzle: Karcher Professional POWER pressure nozzle !EasyLock. 25° flat stream nozzle. Flat high-pressure stream with high surface efficiency and good dirt loosening force. RELIABLE | DURABLE | ERGONOMIC Economical diesel engine - independence from external power sources. Compliant with the requirements of the EU STAGE V emission standard. Electric start. Comfortable handle for easy maneuvering of the device. Durable frame protecting the device from damage. Possibility of transport by crane, e.g. on a construction site. Safety valve on the high-pressure pump and water filter. The water filter protects the pump from impurities in the water. Thanks to the operating parameters of 200 bar and 800 l/h flow, the device will cope well in all conditions, even the most difficult ones. Large, puncture-resistant wheels. SDS reduces pressure pulsations in the high-pressure system of the device and thus extends the life of all pump elements on the high-pressure side. EASY!Force technology reduces the force needed to hold the gun trigger to zero. The device also has an EASY!Lock equipment mounting system that allows 5x faster equipment change than a traditional thread system. The device is completely new and factory-packed

Condition: used, Year of construction: 2007, 410 mm 430x410 mm capacity 90 degrees: round 410 mm Lodpfx Ajztft Toa Rsrr capacity 90 degrees: flat 700x410 mm 410 mm 500x410 mm 320 mm 320x410 mm dimensions of saw-band 5800x41x1,3 mm total power requirement 5,5 kW weight of the machine ca. 3.500 kg dimensions of the machine ca. 3500x2800x2000 mm