Used Hesse By Lfss Hkp 60 for sale (22,956)

Condition: used, Year of construction: 2023, load capacity: 4,990 kg, lifting height: 4,700 mm, fork length: 1,600 mm, total length: 4,470 mm, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 - Steigfähigkeit mit Last % 8,9 - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 Fsdpjxd E Dmsfx Afuepn - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 - Anhängerkupplung, Art Bolzen

Condition: used, Year of construction: 2023, load capacity: 4,990 kg, lifting height: 6,040 mm, fork length: 1,600 mm, total length: 5,120 mm, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 - Steigfähigkeit mit Last % 8,9 Fpedpfoy Aznbjx Afusn - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 - Anhängerkupplung, Art Bolzen

Condition: used, Year of construction: 2023, load capacity: 8,000 kg, lifting height: 4,500 mm, fork length: 1,800 mm, total length: 5,360 mm, - Bedienung: Sitzgerät - Tragfähigkeit/Last: 8000 kg - Lastschwerpunktabstand: 900 mm - Achslast mit Last vorn/hinten kg 21306/2124 - Achslast ohne Last vorn/hinten kg 7097/8333 - Spurweite vorn/hinten mm 1561/1432 - Neigung Hubgerüst/Gabelträger vor/zurück α/β 5/8 ° - Höhe Hubgerüst eingefahren 2710 mm - Kupplungshöhe mm 520/670 - Gabelträger ISO 2328, Klasse/Typ A, B ISO IV A - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4999 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 5199 - Wenderadius mm 3049 - Kleinster Drehpunktabstand mm 877 - Fahrgeschwindigkeit mit/ohne Last km/h 14/17 // 18/20 4 - Hubgeschwindigkeit 5 mit/ohne Last m/s 0,28/0,37 // 0,36/0,48 - Senkgeschwindigkeit 5 mit/ohne Last m/s 0,53/0,42 - Zugkraft mit/ohne Last N 27997/28295 - max. Zugkraft mit/ohne Last N 44000 - Steigfähigkeit mit/ohne Last % 15,5/22,5 - Max. Steigfähigkeit mit/ohne Last % 16,0/23,0 - Beschleunigungszeit (15 m) 5 mit/ohne Last s 7,9/6,8//6,9/6,1 - Betriebsbremse Mechanisch/hydraulisch - Batterie nach DIN 43531/35/36 A, B, C, nein DIN 43536 A - Batteriespannung V 80 - Batteriekapazität K5 Ah 1120 (-1240) // 1085 - Energieverbrauch 45 VDI-Arbeitsspiel/Stunde kWh/h 17,7 - Umschlagleistung 5 t/h 456 // 476 - Energieverbrauch bei Umschlagleistung kWh/h 17,2 // 21,9 - Arbeitsdruck für Anbaugerät bar 250 - Ölstrom für Anbaugeräte l/min 60 - Schalldruckpegel LpAZ (Fahrerplatz) 2 dB(A) Fjdpfx Aszlk R Isfuspn

Condition: used, Year of construction: 2023, load capacity: 4,990 kg, lifting height: 4,700 mm, fork length: 1,600 mm, total length: 4,500 mm, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 Fpedpfxezluw Eo Afusn - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 - Steigfähigkeit mit Last % 8,9 - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 - Anhängerkupplung, Art Bolzen

Condition: ready for operation (used), functionality: fully functional, FOR SALE: BRUDERER BSTA 60 High-Speed Stamping Press With Automatic Strip Feeder BBV 300/200 600 kN | 100–800 spm | Fully automatic | Top-tier Swiss quality Technical Highlights: Nominal force: 600 kN Stroke rate: 100–800 strokes per minute Max. feed length: 200 mm. Year: Unknown (No ID Plate) / Tested under power: 2025 Drive power: 30 Hp Fedpoxz Ugxsfx Afujpn Control voltage: 24V AC Power connection: 440VAC / 50Hz Adjustable stroke: 20 / 25 / 31 / 38 / 45 /51 / 58 / 64 / 70 / 76 mm Shut/Ram height adjustment: 80 mm Working Dimensions: Max tool installation width: 620 mm Strip pass width: up to 320 mm Ram area: 800 × 500 mm Table area: 620 × 680 mm Max strip width: 300 mm Max feeding pitch: 200 mm Max material thickness: 6 mm Feeding angle: 180 Deg Machine Dimensions: Machine footprint (L × W × H): 2210 × 2075 × 2190 mm Weight (approx.): 8,000 kg Equipment Includes: Feeder BBV 300 – fully synchronized mechanical strip feeder system Integrated control cabinet Pneumatic clutch and brake Adjustable stroke and shut height Compressed air connection: 6–10 bar Oil cooling unit included Ready for integration with peripheral systems Machine in excellent technical and visual condition Fully tested Immediate availability from Europe Worldwide shipping available Contact us today for pricing and further technical details. Let us help you upgrade your production line with Swiss precision engineering.

Condition: as good as new (ex-display), Year of construction: 2025, Special price *available upon request New: With the frequency converter option, up to 45% state funding is possible. Combination of: mütek briquetting press MPP 60 + extraction unit MMJET 350 *Approved for indoor installation *Both individual machines are fully manufactured and in stock; they only need to be connected to each other 1. Technical data of briquetting press: Our best-selling briquetting press, a classic. + Proven, simple technology for extremely low failure rates + 25 years of experience, continuous development, and know-how + Several thousand machines in operation with satisfied customers + Excellent price-performance ratio Commodity code: 84793010 Briquette diameter: 50 mm Front bushing: 50 mm Briquette stroke max.: 40 mm Briquette stroke opt.: 40 mm Throughput (material-dependent): up to 60 kg/h* *depending on the bulk density *based on a bulk density of 200 kg per cubic meter Motor power: 5.5 kW, 400 volts / 50 Hz / 3-phase Overall dimensions of the system: 2.2 x 1.1 x 2.8 m (L x W x H) Height - 2.8 m (special container) Delivery in 2 components possible Weight: approx. 1200 kg Oil quantity: 110 liters Silo diameter: 1000 mm Pump: 27 liters Fpsdpfx Afsd Su Hxeuon Hydraulic pre-compressor Option cooling press clamp: no Option cooling hydraulic oil: yes Option level monitoring: yes CE compliant 2. Technical data of clean air extraction unit MMJET 350: Extraction port diameter: 350 mm Motor: 11 kW Extraction nozzle on the left (when standing in front of the dust bin) Residual dust content:

Condition: good (used), Year of construction: 2015, Horizontal baling press Dixi 60 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2015 Fpsdpfoz A T E Hsx Afusn Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2015 Drive power: 7.5 kW, 400 V / 16.5 A Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Materials: Paper, cardboard, film The press is in good condition. It has been inspected and tested by us. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We accept no liability for the information provided or any errors. This offer is non-binding, subject to prior sale, and can be withdrawn at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: ready for operation (used), Year of construction: 2002, clamping force: 1,000 kN, screw diameter: 25 mm, Hydraulic injection moulding machine manufactured in 2002. This Arburg 420 C 1000-150/60 features a clamping force of 1,000 kN and a maximum mold height of 750 mm. It includes a screw diameter of 25/22 mm and a maximum injection volume of 54/30 cm³. If you are looking to get high-quality injection moulding capabilities, consider the Arburg 420 C 1000-150/60 machine we have for sale. Contact us for further details. • Space between columns: 420 x 420 mm • Maximum mold height: 750 mm • Minimum mold height: 350 mm • Screw diameter: 25/22 mm • Maximum injection volume: 54/30 cm3 • Maximum injection pressure: 2500/2340 Bar Fsdpfx Afjz Dk Sgeuopn • Centering ring: 125 mm • Hot runners in the machine: 2 • Core puller: 1

Condition: new, maximum load weight: 2,130 kg, overall weight: 3,000 kg, axle configuration: 2 axles, loading space length: 3,140 mm, loading space width: 1,750 mm, loading space height: 350 mm, total length: 4,500 mm, total width: 1,930 mm, total height: 1,260 mm, Year of construction: 2026, Humbaur three-way tipper with electric pump and steel grid extension – HTK 3000.31 Our price: €7,850 including 19% VAT, 6.4% delivery costs, and registration documents. Individual configurations and numerous accessory and equipment options such as grid or steel sheet extensions, tarpaulins, supports, ramps, and more are available upon request. Also available with a total weight of 3,000 kg and 3,500 kg. Description: The HTK three-way tipper not only impresses with our usual high-quality standards. It is equipped with a practical hand pump, which can also be easily replaced with an electric hydraulic pump if required. An electric pump is installed in the trailer. This makes tipping your load no longer a challenge, but a breeze! Technical data: * Trailer type – Two-axle * Construction type – Aluminum * Rear tipping – 45° * Three-way tipping – 45° * Weight – 870 kg * Total weight – 3,000 kg * Payload – 2,130 kg * Internal length – 3,140 mm * Overall length – 4,500 mm * Internal width – 1,750 mm * Overall width – 1,930 mm * Internal height – 350 mm + steel grid extension 60 cm * Overall height – 1,260 mm + steel grid extension 60 cm Fpedpfxez Dqgwe Afusn * Loading height – 745 mm * Tires – 13 inches Standard equipment: V-shaped drawbar, hot-dip galvanized * Chassis and tipping platform, hot-dip galvanized * Tipping platform made of steel, manufactured in one piece * Humbaur multi-function lighting * Side walls made of anodized aluminum, completely removable * Rear flap, hinged * Tie-down rings mounted in the platform floor, tensile force 800 kg per tie-down ring * Support wheel * Planking shaft as preparation for aluminum planks for easy retrofitting

Condition: new, Year of construction: 2023, load capacity: 4,990 kg, lifting height: 4,700 mm, fork length: 1,600 mm, total length: 4,470 mm, - Bedienung Sitzgerät - Lastabstand mm 525 mm - Achslast mit Last vorn/hinten kg 11475/1283 - Achslast ohne Last vorn/hinten kg 3814/3954 - Bereifung Superelastik - Spurweite vorn/hinten mm 1104/932 - Neigung Hubgerüst vorwärts/rückwärts α/β ° 7/5 - Sitzhöhe bezogen auf SIP (niedrige Variante) mm 1342 - Arbeitsgangbreite bei Palette 1000 x 1200 quer mm 4370 - Arbeitsgangbreite bei Palette 800 x 1200 längs mm 4570 - Wenderadius 2645 mm - Kleinster Drehpunktabstand 729 mm - Fahrgeschwindigkeit mit Last km/h 20 - Fahrgeschwindigkeit ohne Last km/h 20 - Hubgeschwindigkeit (Plus*//Standard-Performance) mit Last 0,39/0,31 - Hubgeschwindigkeit ohne Last m/s 0,45 - Senkgeschwindigkeit mit Last m/s 0,5 - Senkgeschwindigkeit ohne Last m/s 0,5 Fpodpfx Afexd Ep Nsusn - Zugkraft mit Last N 6750 - Zugkraft ohne Last N 7430 - Max. Zugkraft (Plus//Standard-Performance) mit Last N 22590/19000 - Max. Zugkraft (Plus//Standard-Performance) ohne Last N 22560/19090 - Steigfähigkeit mit Last % 8,9 - Steigfähigkeit ohne Last % 15,5 - Max. Steigfähigkeit (Plus//Standard-Performance) mit Last % 20,4/13,8 - Max. Steigfähigkeit (Plus//Standard-Performance) ohne Last % 27,5/27,5 - Beschleunigungszeit 15 m (Plus//Standard-Performance) mit Last s 6,3/7,4 - Beschleunigungszeit 15 m (Plus//Standard-Performance) ohne Last s 5,7/6,2 - Betriebsbremse Hydraulisch betätigte Lamellenbremse - Batteriespannung V 80 - Umschlagleistung (Plus//Standard-Performance) t/h 324/315 - Arbeitsdruck für Anbaugeräte bar 250 - Ölstrom für Anbaugeräte l 50 - Schalldruckpegel (Fahrerplatz) dB(A) 66 - Humanschwingung: Beschleunigung nach EN 13059 m/s2 0,42 - Anhängerkupplung, Art Bolzen

Condition: used, Year of construction: 2007, x-travel 730 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain turning speed range - main spindle max. 18.000 min/-1 power capacity - main spindel 10 / 15 kW max. Torque 130 / 87 Nm tool taper HSK-A63 swivellable NC: ° table surface area 1.000 x 600 mm T-slots 9x 14 x 63 mm table diameter 600 mm rotatable C: 360 ° max. table load 500 kg number of toolpositions 60 pos. tool taper HSK-A63 total power requirement 40 kVA weight of the machine ca. ca. 11,0 t Fpodpfx Ajwpw E Nofuon dimensions of the machine ca. 4,5 x 4,5 x 3,5 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 monoBLOCK - 5 Axis - NC-Rotary-Table - Swivel-MillingHead

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 11,689 h, load capacity: 6,000 kg, lifting height: 4,150 mm, fuel type: electric, mast type: telescopic, construction height: 3,010 mm, fork length: 2,000 mm, drive type: Elektro, Diesel forklift Fjdpfx Asu D Tdcsfuopn Load center: 500 ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Telescopic Gearbox: Electromechanical Technical condition: Very good Front tires Type: Superelastic Front tires Size: 355/65-15 Rear tires Type: Superelastic Rear tires Size: 250-15 Sideshift, fork positioner, 3rd valve, 4th valve, rear working lights, front working lights, heating, soot filter, full cab, safety light, , single pedal, mini-lever

Condition: ready for operation (used), Year of construction: 1998, spindle motor power: 28,000 W, spindle speed (max.): 12,000 rpm, travel distance X-axis: 600 mm, travel distance Y-axis: 700 mm, travel distance Z-axis: 600 mm, total height: 2,700 mm, total width: 4,500 mm, overall weight: 11,700 kg, product length (max.): 4,500 mm, number of axes: 3, This 3-axis DECKEL MAHO DMC 60 U was manufactured in 1998. It features impressive X, Y, and Z-axis travels of 600 mm, 700 mm, and 600 mm respectively, along with a maximum spindle speed of 12,000 rpm. The machine includes a robust table size of 630 x 500 mm and a maximum workpiece weight capacity of 800 kg. If you are looking to get high-quality milling capabilities, consider the DECKEL MAHO DMC 60 U mill-turn centre we have for sale. Contact us for further details. • Rapid traverse (X/Y/Z): up to 30 m/min • Table: NC rotary-tilting; size 630 × 500 mm; • Spindle: up to 28 kW; • Number of tools: 120 (o "Tool capacity: 120") • High-pressure coolant: 40 bar • Coolant tank: 1,000 liters • Tool magazine/ATC: automatic tool changer • Machining capabilities: simultaneous 3-axis milling; contouring; drilling; tapping; boring; complex surface machining; aerospace and automotive component manufacturing • Construction/design: high-rigidity universal machining centre; integrated rotary-tilting table; full 3-axis interpolation; precision linear guideways • Dimensions (approx.): length 4,500 mm; width 2,500–4,500 mm; height 2,500–2,700 mm • Typical applications: aerospace components; medical parts; tool & die manufacturing; automotive components; precision mechanical engineering Additional equipment • Internal coolant system • Chip conveyor Fedpfozcp Alsx Afuepn • Touch probe • Tool setter • Tool measurement system (Blum / Renishaw, depending on machine) • Electronic handwheel • Automatic pallet changer (RS4 versions)

Condition: good (used), Year of construction: 2001, Manufacturer Mayfran Type D 60 Type chip conveyor Condition used Dimensions Length 3500 mm Width 620 mm Height 1550 mm Height 350 mm Fpodpfx Ajvu R Ddofujn

Condition: used, Year of construction: 2003, x-travel 630 mm y-travel 560 mm z-travel 560 mm control iTNC 530 Heidenhain Main spindle: turning speed range - main spindle 20 - 12.000 min/-1 power capacity - main spindel 15 / 10 kW max. Torque 125 Nm tool taper MAS BT 40 swivellable B: 103 ° feed: feed speeds 20 - 10.000 mm/min rapid traverse X-axis 26 m/min rapid traverse Y-axis 26 m/min rapid traverse Z-axis 20 m/min Resolution 0,001 mm input unit 0,001 mm work table: surface area 1.000 x 600 mm Fpsdpsvn Utcsfx Afuon rotary table dia. 600 mm number of T-slots 8 / 1 T-slot - width 14 H12 / 14 H7 T-slot - distance 63 mm max. table loading capacity 350 kg rotatable C: 360 ° Tool-Presetter: number of toolpositions 24 pos. max. tool diameter 80 mm max. tool-dia with free toolbox 130 mm max. tool length 315 mm max. tool weight 8 kg total wight max. 100 kg total power requirement 26 kVA weight of the machine ca. 6,7 t dimensions of the machine ca. 4,0 x 4,0 x 3,0 m CNC - MachiningCenter Universal DECKEL MAHO - DMU 60 T - 5-Axis - controled NC-Swivel-Milling-Head ( B-Axis ) - Rotary Table integrated in Working-Table ( C-Axis )

Condition: new, Year of construction: 2026, machine/vehicle number: MH-FJ-1AWS_2, The VOGEL MH-FJ-1AWS carton sealing machine has a side drive belt system. The machine is specially designed for cartons in smaller formats. Carton formats: Length 160 - ∞ mm Width: 90 - 320 mm Height: 60 - 280 mm Fodpsz E Iqiofx Afuspn Technical data: Length 1,090 mm Width 890 mm Weight 85 kg Operating voltage 220 V CE marking Accessories: For our VOGEL carton sealer program we offer rollers, leading and trailing tables, roller conveyors.

Condition: excellent (used), CATALOGUE NUMBER: 6935 TECHNICAL DATA - Shaft width: 630 mm - Number of knives: 4 pcs - Maximum thickness of the workpiece: 210 mm * Top: - Feed pawls - Toothed infeed shaft, pull-type - Pressure rollers - Planing shaft - Pressure rollers - Smooth outfeed shaft, pull-type * Bottom: - Adjustable rollers in the lower bed: 2 pcs - Motor: 4.4 kW - 2 types of feed speed - Dimensions (L/W/H): 1220x950x1060 mm - Weight: 750 kg ADVANTAGES - German-made - Used thicknesser, very good condition Net price: 12,900 PLN Fodezr U Dxjpfx Afuspn Net price: 3,000 EUR Net price calculated based on an exchange rate of 4.30 PLN/EUR (Prices may be subject to change in the event of significant exchange rate fluctuations)

Condition: new, V160mm/120mm L200mm Fpodpelp Hvhofx Afujn

Condition: used, Year of construction: 2011, operating hours: 48,000 h, machine/vehicle number: IntNr231180, DMG Gildemeister CNC Multi-Slide Automatic Turning Machine MSL 60/7 Year of manufacture: 2011 Machine on-time: 56,000 hours Automatic cycle hours: 48,000 hours CNC control: FANUC 31i – Model A, 7 axes Technical specifications - Number of axes: 7 - Number of spindles: 2 MAIN SPINDLE - Max. bar diameter: 60 mm - Spindle speed: 5,000 rpm - Spindle drive power: 7.5 kW COUNTER SPINDLE (on turret) - Max. bar diameter: 42 / (60) mm - Spindle speed: 5,000 rpm - Spindle drive power: 3.7 kW Driven tools (turret): - Tool drive power: 3.7 kW - Max. speed: 6,000 rpm Back-side machining: - 4 fixed tool stations - Capacity for up to 14 tools possible Fodpfx Afoz E N S Ujujpn Bar feeder: FMB Turbo 5-55 / 3200 / A Year of manufacture: 2008 Bar diameter: 5 – 55 mm Bar length: 3,200 mm Chip conveyor included Machine can be inspected under power by appointment. Technical data, details, and prior sale subject to change and error.

Condition: used, functionality: fully functional, Year of construction: 1989, operating hours: 8,775 h, load capacity: 3,000 kg, lifting height: 3,175 mm, fuel type: diesel, mast type: free lift with telescopic boom, gearing type: automatic, empty load weight: 5,380 kg, color: red, Equipment: 3rd hydraulic function, cabin, lighting, pallet forks, Cab with heating (driver's door included), side sliding door (disabled), German-made engine. For sale to commercial businesses only, with no warranty of any kind. Fedpfx Ajz E R Hyefujpn Loading possible.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,351 kg, axle configuration: 3 axles, first registration: 02/2023, total length: 13,550 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2023, Equipment: cooling unit, full service history, power assisted steering, Technical specifications FP 60 SMART. THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation Insulated double rear doors (FP, NX17) foam with double s/steel lockrods Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4009mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). 1 insulated ventilation flap in the left hand rear door at the top Tyres Information Front left - 7 mm Front right - 5 mm Fjdpfx Aszcykaefuopn Middle left - 9 mm Middle right - 9 mm Rear left - 5 mm Rear right - 5 mm

Condition: used, Manufacturer: BYD Gardner Model: micro-gloss 60° Used Fjdpfsz Hm Ayjx Afujpn

Condition: new, bore capacity in steel (diameter) 35 mm throat 230 mm bore stroke 125 mm spindle taper ISO 40 spindle turning speed range 115 - 1750 U/min 560 mm 175 mm table surface area 1000 x 240 mm max. distance between table and spindle-nose 375 mm connected load frequency 400 V total power requirement 0,85/1,5 kW weight of the machine ca. 0,95 t dimensions of the machine ca. 1,3 x 1,2 x 2,1 m Domestic equipments: automatic feed and handwheel. Drill chuck with MK4 holder Digital depth display Fodpfx Afsu Imkdsuopn Left / right switch. Emergency stop switch Pivot head swiveling Spindle protection. Small toolbox Machine base and X-axis feed optional.

Condition: new, table length 900 mm table width 600 mm table height 700 mm Fpodpfx Asupxmfsfusn weight of the machine ca. 90 Kg dimensions 0,9 x 0,6 x 0,7 m

Condition: used, Indramat TRK 6-4U-380/60-G0 TSS10/633 Fedpfx Afsz Hz N Ujuspn