Used High-Performance Wire Feeder For Welding System for sale (51,180)

Condition: good (used), Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 25,300 mm Number of bays / rack row: 09 pcs. 2,700 mm each Number of levels plus floor level: 02 pcs. Technical data on volume: Pallet spaces per bay: 09 pcs. Pallet spaces per rack row: 81 pcs. Total pallet spaces: 81 pcs. issued from: Loading equipment: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet ( max. ): 1,000 kg The scope of delivery includes: 10x pallet rack uprights, used Material color: blue Upright type: A103 Upright profile: 100 x 79 x 3.00 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( bolted framework ) 2,300 mm high Hsdpfjtq Sm Hsx Ab Nenl 1,100 mm deep 36x pallet rack beams, new Material color: RAL 2001 orange Box profile: 110 x 50 mm Beam type: 2C-S 1115 Clear width: 2,700 mm Agraffe: G.E. - 3 Max. load per pair of beams 3,000 kg, with evenly distributed load 72x integrated locking pin, new Material color: orange To secure the longitudinal beams against unintentional lifting out 40x bolt anchor, new Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x shims, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven ground 01x load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Currently available from stock: 23 pcs. Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: as good as new (ex-display), Year of construction: 2023, operating hours: 200 h, The system is located in the BIBUS Austria Democenter and can be inspected and tested at any time. The device can process a total of 14 materials - in addition to common plastics such as ABS, PLA, TPU and Carbon PA, high-performance polymers such as Ultem, Peek, CarbonPeek and Helios-Peek are also available. Four material-dryer are included in the delivery, Hnedpfjibikwjx Ab Nol Payment terms: Cash in advance, excluding transport and commissioning - these costs are charged depending on the location.

Condition: good (used), Technical data of the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Setup technical data: Number of rack rows: 01 pcs Length per rack row: 27,990 mm Number of compartments per rack row: 10 pcs Number of levels plus floor level: 03 pcs Hjdpfjyay D Iex Ab Nenl Volume technical data: Pallet locations per compartment: 12 pcs Pallet locations per rack row: 120 pcs Total pallet locations: 120 pcs Assumed configuration: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum weight per pallet: 1,100 kg Scope of delivery includes: 11x pallet rack frames, used Material colour: Sendzimir galvanized Frame type: P95 Profile dimensions: 90 x 75 x 2.5 mm Including horizontal and diagonal braces, frame guards, and baseplates Frames are pre-assembled (bolted truss design) Height: 4,100 mm Depth: 1,050 mm 60x pallet rack beams, used Material colour: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Max. load per pair of beams: 3,300 kg (evenly distributed load) Note: The functionality of the beams is not affected by the holes; SSI project with heat-dust plates that were bolted on as per manufacturer’s instructions! 120x safety pins, used Material colour: Sendzimir galvanized To secure the crossbeams against unintentional lifting 44x anchor bolts, new Manufacturer: Hilti Model designation: HST2 V3 M12x105 5-25 Version: carbon steel, galvanized Approved for: cracked concrete 44x shims, used Version: completely galvanized For leveling the rack frames standing on uneven ground 01x load capacity sign With specifications for bay and shelf loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your points of contact in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is offered for collection only. Any additional transport or shipping of this item is subject to extra costs, which can be requested from us separately depending on the delivery location and scope.

Condition: good (used), Technical Data of the Pallet Racking System: Racking system: SSI Schäfer Type: PR 600 Technical Data of the Installation: Number of racking rows: 01 pcs Length per row: 22,500 mm Number of bays per row: 08 pcs Number of levels incl. ground level: 02 pcs Volume Specifications: Pallet spaces per bay: 09 pcs Pallet spaces per row: 72 pcs Total pallet spaces: 72 pcs Based on: Load carrier: Euro-pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Max. weight per pallet: 1,100 kg Scope of delivery includes: 09x pallet rack uprights, used Material finish: Sendzimir galvanized Upright type: P113 Profile dimensions: 100 x 100 x 2 mm Incl. horizontal and diagonal braces, upright protectors and foot plates The uprights are pre-assembled (bolted truss construction) Height: 4,000 mm Depth: 1,100 mm 32x beam pairs, used Material finish: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5-hook Max. load per beam pair: 3,300 kg (with evenly distributed load) Note: The load-bearing capacity of the beams remains functional despite the holes— SSI project with thermal dust panels as per manufacturer's specifications screwed on! 64x safety pins, used Material finish: Sendzimir galvanized For securing the longitudinal beams against accidental lifting 36x anchor bolts, new Manufacturer: Hilti Type: HST2 V3 M12x105 5-25 Design: Carbon steel, galvanized Hedpfoyaxmhex Ab Nsnl Approved for: cracked concrete 18x levelling plates, used Design: fully galvanized For levelling uprights standing on uneven floors 01x load capacity sign With information on bay and compartment loads, manufacturer and order number Dimensions: 420 x 297 x 3 mm Your contacts in our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information on the item: This item is only available for collection. Any requested transport or shipment of this item will incur additional costs, which can be requested separately from us depending on delivery location and scope.

Condition: used, Year of construction: 2007, machine/vehicle number: 1369, Einbrenn-System Kodak TSO-850 High-Speed Thermo-System / Baking-System Kodak-TSO-850 High-Speed Thermo-SystemYear 2007 - Serial-No. 1369 Arbeitsbreite / Working width max. 850mm Elektrischer Anschluss / Power supply: 400V / 50Hz / 40A Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test Hedpfxsh Aya Ie Ab Njnl

Condition: good (used), Technical data for the pallet racking system: Racking system: SSI Schäfer Type: PR 600 Technical data for the setup: Number of racking rows: 01 unit Length per racking row: 14,040 mm Number of bays per row: 05 units Number of levels plus ground level: 02 units Volume data: Pallet locations per bay: 09 units Pallet locations per row: 45 units Total pallet locations: 45 units Assumptions: Load carrier: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Maximum pallet weight: 1,100 kg Scope of delivery includes: 06x pallet racking frames, used Material finish: Sendzimir galvanized Frame type: P73 Profile dimensions: 90 x 75 x 2.5 mm Incl. horizontal and diagonal bracing, frame protectors, and base plates Frames are pre-assembled (bolted truss design) Height: 3,600 mm Depth: 1,050 mm 20x pallet racking beams, used Material color: RAL 4002 red violet Box profile: 120 x 50 mm Beam type: TRV1-270-125-30 CE Clear span: 2,700 mm Connector: 5 HK (hooks) Maximum load per pair of beams: 3,300 kg, with evenly distributed load Note: Functionality of the beams is ensured despite holes (SSI project with heat protection plates bolted as per manufacturer’s specifications) 40x safety pins, used Material finish: Sendzimir galvanized Hodpsyapf Ijfx Ab Nonl For securing the longitudinal beams against unintended lifting 24x wedge anchors, new Manufacturer: Hilti Type: HST2 V3 M12x105 5-25 Material: Carbon steel, galvanized Approved for: Cracked concrete 12x shims, used Material: fully galvanized For leveling racking frames placed on uneven floors 01x load sign With specification of bay and shelf loads, manufacturer, and order number Dimensions: 420 x 297 x 3 mm Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: This item is only offered for collection. Additional transport or shipping of this item is subject to extra costs, which can be quoted separately depending on delivery location and scope of delivery.

Condition: good (used), We are selling a Merkle W 300 DC TIG direct current welding machine Hnsdpou Sqqiofx Ab Nsl TIG direct current range: Open circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A HSB 60 % ED (10 min.) 320 A HSB 80 % ED (10 min.) 300 A DB 100 % ED: 260 A (40°C) Primary continuous power: 9.5 kVA primary continuous current: 13.7 A primary maximum current: 19 A Weight: 130 kg Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder

Condition: new, - Fast cutting saw for solid material / profile up to 75mm - autom. loading magazine for bars up to 6300mm length and 3t weight - feed via ball screw - single stroke with 600mm - SIEMENS - electronics / drive / control - good parts / first cuts are sorted Hnsdpfxjggytqo Ab Nel - on request with conveyor unit for sawn parts - robot connection possible - incl. suction

Year of construction: 2014, condition: good (used), functionality: fully functional, High-performance fan Zenner, type VTZ 710/63/1 special, built in 2014, consisting of control cabinet, frequency converter, cell lock Hjdpfx Aoybb A Ijb Nsnl Technical data Manufacturer: Zenner Ventilatoren Type: VTZ 710/63/1 special Year of construction: 2014 Volume: 4.72 m³/s Max. temperature: 80°C Density: 1.2 kg/m³ Total pressure: 5,000 pa Speed: 2900 rpm Motor: 55 kW Voltage: 400/690 V / 50 Hz Weight: approx. 800 kg The fan is intended for transporting paper/cardboard. The material is also chopped up. The machine is in good condition. It was checked and tested by us in 28816 Stuhr. You can find the video on our website or on our YouTube channel. Viewings, even under power, are possible at any time by arrangement. Video calls are possible on request. We are happy to answer questions about the machine by phone from Monday to Thursday from 8 a.m. to 2 p.m. On Friday we are there for you from 8 a.m. to 1 p.m. Please note: All technical data refer to information provided by the manufacturer. We accept no liability for the information provided or for any errors. The offers are subject to change, subject to prior sale and can be revoked at any time. Viewings are possible by arrangement. The sale takes place ex location, without warranty or guarantee.

Year of construction: 1970, condition: good (used), functionality: fully functional, Stenner RESAW VHL 48 manufacture Stenner UK S/N J2103 year 1970 (original photos coming soon) Principal Dimensions and data: Diameter of saw pulleys: 48"= 1220mm Width of saw pulley face-standard 5" (127mm) Width of saw pulley face-optional 5 1/2" (140mm) Maximum width of saw - standard 5 1/2" (140mm ) Maximum width of saw-optional 6" (150mm)A Minimurn length of saw 25" 8" (782mm) Maximum height of top saw guide above table 28" (710mm) Table height from floor level 31 1/2" ( 800mm 9 Overall height from floor level 9.1" ( 2770mm) Overall width 8.1" (2460mm) Speed of saw pulleys,r.p.m. 8,000 (2440m/min) Horse power range 30 kW Size of fast and loose pulleys 20"x6 1/2" Feed speeds, standard; f.p.m. or m/min. 0-140 (0-42.6m) Shipping Specification : Standard Machine : Net weight, lbs. 3583 kg The VHL 48 is a band resaw of advanced design embodying many new features resulting from a close study of user-operator requirements, and the necessity to provide fast and accurate sawing coupled with ease of operation, reduced operator fatigue, low maintenance, and increased safety. The design caters fully for these essential factors which contribute to a markedly high level of operating efficiency. The machine is primarily designed for the planning mill and joinery shops. The thin bandsaw gives the machine a high timber recovery rate; the loss due to saw kerf being very low. Compared with a circular radial-arm resaw, the VHL is faster, less wasteful, and uses less power for a given class of work general The VHL is made only as, a left-hand machine, i.e. the saw pulleys run in an anti-clockwise direction when looking in the direction of the feed. Hedpfx Absvuhumo Nsnl The drive is normally arranged to give a saw speed of 8,000 feet permin. (2440m l/min.) Main Drive The main drive is applied to the bottom saw pulley spindle which is prepared for vee belt, flat belt, or flat belt fast and loose pulleys to suit the proposed driving unit. Complete electric motor drives, up to 40 H. P. and for most current supplies can be provided; they include two vee pulleys, set of vee belts, belt guard, motor with slide rails, starter and a master stop button which is fitted to the machine base close to the sawyer's position. horizontal rollers The horizontal rollers are 6" (152mm) diameter and extend the full opening on the fence side and 6" (152mm) beyond the table on the open side; they are normally free-running idle rollers. They can be supplied hydraulically driven as optional equipment, either with the machine or after installation; the rollers are then driven in synchronism with the main feed rolls, by a separate motor. The drive is arranged so that the open-side roller at the outfeed end rotates in the reverse direction to facilitate the return of timber to the sawyer. The roller in front of the saw is moveable sideways to permit rapid saw changing.

Condition: new, functionality: fully functional, Year of construction: 2026, The wobbler feeder is a feeding system that delivers superior performance, especially when handling large, sticky, and moist materials. Its structure, consisting of rotating elliptical rods, creates a vibrating motion during material flow. This motion separates fine materials from larger particles and provides consistent feeding to crushers and screens. As a result, clogging is prevented and the overall efficiency of the plant is increased. Widely used in the mining, aggregate, and recycling industries, wobbler feeders are typically placed in front of primary crushers. This ensures that the material undergoes pre-screening in the initial stage. Its ability to operate without clogging, even with sticky and clayey materials, makes it an ideal solution for demanding conditions. Its mechanically simple design, ease of maintenance, and long-lasting performance keep operating costs to a minimum. With these features, wobbler feeders are a reliable choice for all plants requiring a continuous and balanced material flow. Wobbler Feeder Technical Specifications Body Liners: HARDOX 450 – 10 mm Feeding Capacity: 150 - 200 t/h Weight: 18.5 tons Dimensions: 4,000 x 1,000 mm Wobbler Motor: 14 x 3 kW, 1500 rpm, GAMAK brand Gearbox: Heavy-duty type Walking Platforms: Available Steel Feet: Available Why Choose CONSTMACH Wobbler Feeders? Hsdpfx Aboxpvh Te Nonl CONSTMACH wobbler feeders stand out with their high-quality, durable materials, heavy-duty gearboxes, and ease of maintenance. Each one is designed to offer long-lasting, low-cost operation. HARDOX body liners provide maximum resistance to wear, while the adjustable design easily adapts to different material types. CONSTMACH is a trusted name in the industry for its production quality, engineering support, and after-sales service. Invest in a wobbler feeder with the CONSTMACH guarantee for the continuity and performance of your facility. What Do We Do at Constmach? Constmach is a leading machine manufacturer offering a wide range of products designed to meet the needs of the construction and mining industries. Our product portfolio includes concrete block making machines, stationary and mobile concrete plants, stone crushing machines, stone crushing and screening plants, sand washing machines, sand making machines, asphalt plants, conveyor belt systems, jaw crushers, and mobile crushing plants. With its high quality standards, innovative production approach, and customer-focused solutions, Constmach stands out as a reliable brand in both national and international markets. Our products continue to be the preferred choice of industry professionals due to their durability, efficiency, and long-lasting performance.

Condition: used, This listing is for the Spectrum Labs KrosFlow KR2i TFF System The unit is in full working condition and is ready for immediate release The KR2i TFF System is a versatile tangential flow filtration system, suitable for running volumes from 2 mL up to 10 L. It consists of a pump, tablet controller, scale, module stand, and real-time data collection software. The KR2i can mount up to two pump heads, allowing users to add an additional one if desired. Hodpfx Abexwc Euj Nsnl Key Features of KR2i TFF System: Hollow fiber filter for 2 mL to 10 L / Flat sheet cassettes can process 12 mL to 15 L Auxiliary pump (900-1893): 600 RPM SAW-KR21 Scale: Capacity up to 20 kg with readability of 0.2 g Scale platform size: 18 x 18 cm Tablet control for ease of operation and real-time monitoring IP33-rated plastic enclosure is easy to clean Assortment of accessories included (see photos) The KR2i pump is designed to handle abrasive slurries, corrosive fluids, and highly viscous fluids with minimal wear. The system ensures that the fluid only comes into contact with the tubing and tube material, eliminating valves that could clog and making the inner surfaces easy to clean. With its compact footprint and versatility, the KR2i is an ideal choice for small-volume, R&D-scale microfiltration and ultrafiltration

Condition: new, Year of construction: 2024, functionality: fully functional, saw blade diameter: 480 mm, GERD WOLFF GLS-160 High-performance circular saw Introducing the new generation of High-Performance Metal Circular Saws, seamlessly blending precision and efficiency with German quality. Our High-Performance Metal Circular Saw machines are setting the standard in metalworking thanks to their innovative technology, allowing for precise and effortless cutting of steel of any kind. From 10 millimeters to an impressive 250 millimeters in steel diameter, our machines cut with utmost accuracy within seconds. At the core of these machines are their automatic functionalities, coupled with an advanced ball screw spindle and an automatic material feeding system. This combination ensures not only maximum precision but also impressive speed. A Siemens motor and Siemens PLC screen guarantee reliable performance and easy control. Moreover, our High-Performance Metal Circular Saw machines feature a special system for quick and convenient blade changes. The hydraulic material tension provides secure fixation of the workpiece during the cutting process. Additionally, a programmable misting system is integrated to ensure optimal lubrication and cooling of the saw blade, extending the tool's lifespan. With our servo and driver technology, you have full control over your manufacturing processes, allowing you to optimize production and achieve the highest quality standards. Hnodpfetrk S Nox Ab Nel Choose our High-Performance Metal Circular Saw machines and embrace the future of metalworking – precise, efficient, and reliable. Hochleistungskreissäge, Präzisionssäge, Industriekreissäge, Starkstromsäge, Metallsäge, Präzisionsschneidemaschine, Schwerlastkreissäge, Großsäge, Industrie-Kreissäge, Kreissägeautomat, Metallkreissäge, Leistungssäge, Profi- Kreissäge, Sägeautomat, Grobschneidemaschine, Industrie-Metallsäge, Säge mit großer Leistung, Produktivitätssäge, Große Kreissäge, Schneidemaschine für industrielle Anwendungen, Schnellkreissäge, Industrie-Hochleistungssäge, Industrie-Sägemaschine, Schneidemaschine für schwere Anwendungen, Hochleistungs- Schneidemaschine, Industrie-Maschinensäge, Starkstromkreissäge, Automatische Metallsäge, Industriepräzisionssäge, Großraumsäge, High-Performance Circular Saw, Precision Saw, Industrial Circular Saw, Heavy-Duty Circular Saw, Metal Cutting Saw, Precision Cutting Machine, Heavy-Duty Cutting Saw, Industrial Saw, Power Circular Saw, Metal Circular Saw, Precision Cutting Saw, Professional Circular Saw, Automated Circular Saw, Large Circular Saw, Precision Industrial Saw, Industrial Metal Saw, High-Power Cutting Saw, Productivity Saw, Big Circular Saw, Industrial Cutting Machine, Fast Circular Saw, Heavy-Duty Industrial Saw, Industrial Saw Machine, Heavy-Duty Cutting Machine, High- Performance Cutting Machine, Industrial Machine Saw, Power Circular Saw, Automatic Metal Saw, Industrial Precision Saw, Large Capacity Circular Saw.

Condition: used, Forming area max. (length,width) / mm max. depth of product positive / mm max. depth of product negative / mm Technical specifications: Roll diameter approx. 420mm Projection in width approx. 415mm Projection in height approx. 265mm Hnedewgi Siopfx Ab Njl Table size approx. 605 x 600 mm Belt speed 18 - 562 m/min. 8 levels Saw band length min./max. 3150 / 3260mm - Saw band speed over 4 gear stages and 2 engine speeds - Saw blade butt welder IDEAL BS 0-16 with scissors and whetstone - swiveling work table in 2 axes Dimensions: approx. L x W x H 950 mm x 750 mm x 1900 mm Weight 600kg with table feed Description has been adopted.

Condition: as good as new (ex-display), 600 Kg load capacity welding rotary table adjustable in height with plate diameter 1000mm height min. 0,65m, max. 1,530m speed from 0,01 - 1,1 rpm inclination up to 135 hand and foot remote control with speed indicator very robust Hnjdpfod D D Hljx Ab Nel

Condition: new, Year of construction: 2025, 1000 Kg load capacity welding rotary table adjustable in height with through hole 200mm plate diameter 900mm height horizontal min. 0,8m, max. 1,6m height tilted min. 0,6m, max. 1,4m speed from 0,1 - 1,2 rpm length 2000mm width 1000mm Inclination up to 135 Hodpsf Ezdcofx Ab Nenl hand and double - foot remote control with speed indicator very robust

Condition: like new (used), Year of construction: 2018, Rated Loading: 3000 Kg Rotating speed: 0,05 ~ 0,6 U/min Tilting speed: 0,5 rpm Worktable size: 1200mm Tilting angle: 0~120° Rotating Power: 1,5 Kw Hsdpfx Abjdt Rhgs Nonl Hydraulik Motor Power: 3 KW Speed adjusting way: VFD Worktable height: 960mm ~ 1910mm Hydraulik system pressure 10 MPa

Condition: new, Year of construction: 2024, 1000 kg load capacity complete set incl. hand and double foot remote control Welding rotary table height adjustable with through hole 200mm Hnodpfx Absid Etij Nel plate diameter 900mm Height horizontal min. 0,65m, max. 1,25m height tilted min. 0,45m, max. 0,95m speed from 0,01 - 1,1 rpm Tilt up to 135 hand and foot remote control with speed indicator very robust

Condition: new, Year of construction: 2023, Protec KT 3000 HV, Hydraulic height adjustable Load 3000 KG Manual remote control with digital display Double foot remote control Height approx. min. 700mm tilted to center, height max. 1400mm diameter faceplate 1400mm Tilt angle min. 135 Speed 0,05 to 0,9 rpm. Hedeifw Hdspfx Ab Nenl Motor power 3 KW

Condition: good (used), various counter bearing support blocks, rollers 5-fold adjustable for transverse and longitudinal rotation to relieve e.g. the welding rotary table or to transport pipes different versions Height adjustment in steps or stepless different heights Hnjdpfx Aol Dwnljb Nel The carriers themselves have a load capacity of up to 8 tons prices from 480.-€ to 850.-€

Condition: new, Year of construction: 2024, Welding rotary table Protec KT 10 000 HV Complete set incl. hand and double foot remote control Digital display for speed Hydraulic height adjustment Tilting range 0 to 130 Dimensions: height tilted min: 1080mm height tilted max: 2200mm height horizontal min: 1400mm diameter of the clamping disk 2000mm length 3250mm, width 1780mm Hsdpfxsk S D N Eo Ab Nsnl speed from 0,05 to approx. 0,6 rpm.

Condition: as good as new (ex-display), Year of construction: 2019, 1200 Kg load capacity welding rotary table, very robust speed infinitely variable from 0,05 to 0,9 rpm Hodpfsfg Uv Hsx Ab Nenl Diameter turntable 1200mm inclination up to 120 height horizontal 950mm, tilted to middle 720mm hand and foot remote control length 1,35m x width 1,2m

Condition: new, Year of construction: 2024, 600 kg load capacity Hjdpog Tdpgjfx Ab Njnl Welding turntable height adjustable with through hole 100 mm Plate diameter 700mm Horizontal height min. 0.65m, max. 1.25m Height tilted min. 0.45m, max. 0.95m Speed from 0.01 - 1.3 rpm Tilt up to 135° Hand and foot remote control with speed display very robust

Year of construction: 2018, condition: like new (used), Dumeta welding rotary table hydraulic height adjustable 500 Kg load capacity welding turntable height adjustable with through hole 100 - 200mm plate diameter 700mm Height horizontal min. 0,6m, max. 1,2m height tilted min. 0,40m, max. 1,0m Hnodpfx Aehua Dqjb Nsl speed from 0,11 - 1,25 rpm Weight 750 Kg Tilt up to 135 hand and foot remote control with speed indicator very robust

Condition: as good as new (ex-display), 600 Kg load capacity welding rotary table adjustable in height with through hole 100 - 200mm plate diameter 700mm height horizontal min. 0,65m, max. 1,25m height tilted min. 0,45m, max. 0,95m speed from 0,01 - 1,1 rpm Tilt up to 135 hand and foot remote control with speed indicator Hsdpfsfxpfmsx Ab Nsnl very robust