Used Hose Clamps 25 Pieces for sale (31,506)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 5,400 kg, maximum load weight: 33,600 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 2,960 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further Information Chassis Fine-grained steel welded structure, lightweight design, fifth wheel with interchangeable 2 kingpins Curved front end, patented Telescopic support in the center; uncoupling with load is not possible; when uncoupled, the vehicle must lean backwards. Support wedges + holder Underrun protection, foldable Half-shell fenders Integrated fender holder, surface designed to deflect stones Splash flaps behind the last axle in asphalt design, attached to the fender with a hinge, with the option to be hooked onto the top of the fender, shortened fender Towing hook at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension 1st axle: automatic lift axle, incl. forced lowering and start-assist Hot-dip galvanized lift axle mechanism Braking System 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 tamper-proof coupling heads at the front, without connecting line EBS, electronic brake system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raising and lowering valve Vehicle driving stability system Wheels & Tires 385/65R22.5 Steel rims, factory silver "TPMS" according to ECE R 141, display via the towing vehicle's display, via EBS, without installation in the truck (this must be a prerequisite in the truck. Only for base tires). Electrical System 24 Volt, multi-chamber lights, yellow LED lighting on the sides coupled with the turn signal "flashing side lights" 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pin tamper-proof sockets at the front, without connecting cable Hydraulics High-pressure cylinder max. 250 bar, with HDK screw fitting, fixed part, NW 48 mm Actuation hydraulically via truck auxiliary drive Body Steel round body, Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinder with access ladder on the front wall. Membrane back wall Rear wall as a swing gate, externally mounted with double hook locking. 2 clamping screws with cam locks on the sides at the bottom. Side walls continuous 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized design Body in insulated version, Fliegl Asphalt Profi Thermo, body insulated at the front, sides, bottom and rear with Fliegl Isotherm. BASIC cover, tarpaulin cladding Standing platform + access ladder, connection plate for air/electrical and brake connections with large clearance for the best possible operation. Roll-up cover on one side for stowing on the right side, with central locking on the left side Country of registration/signage Germany Test approval according to EC 2007/46 Body stability according to EN 12642 24/7 service hotline Kedpfxji Rix Ie Anwjdn Manufacturer certificate for thermal vehicles according to RS 10 - 2013 prepared for license plate holder, single-row Warning sign according to ECE - 70 Paintwork Frame DB 7350 Novagrau "10 years warranty against rust perforation" Support feet galvanized Body/ Side tarpaulin RAL color, solid color Roll-up cover RAL 7035 light gray Thermal insulation a

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,750 kg, maximum load weight: 30,250 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,450 mm, loading space volume: 25 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,000 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer needs. Further information Chassis, semi-trailer, tipper Fine-grained steel welded construction, in a basic lightweight design, drawbar plate with 2 interchangeable kingpins Curved front closure, patented 24 tons, 2-speed landing gear, single-sided operation, with a straight lower part, without thrust compensation Underrun protection, foldable Half-shell fenders Tow hitch at the rear Axles + suspension SAF disc brake axles with a 430 mm disc diameter Axle/chassis laser-aligned to reduce tire wear and fuel consumption Axles in off-road design Air suspension Kdsdpfx Ansi Ri Nfewon 1st axle, automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rusting Braking system 2-line compressed air braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 keyed coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by tractor units that ensure the effectiveness of the ABS! with raising and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display via the tractor unit's display, via EBS, without truck installation (this must be available in the truck. Only on standard tires). Electrical system 24 volts, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides, linked to the turn signal ("flashing side marker lights") 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole keyed sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw fitting, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Tippers Steel round tipper body in Stone Master design made of highly wear-resistant HB 400/450 steel. Sloping front wall with externally mounted hydraulic cylinders and a ladder on the front wall. Greenline - conical and aerodynamic tipper body shape Shovel and broom holder on the outside of the front wall. Membrane - rear wall Rear wall as a pivoting flap with a double-hinge hinge, externally mounted with 2-fold hook lock. 2 clamping screws with cam locks on the sides at the bottom. Side walls are continuously 4 mm thick, floor is 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with ladder, connecting plate for air/electricity and brakes with ample space for optimal operation. Rolltarp, one-sided for storage on the right, with central locking on the left Registration country/signs Germany with Dekra inspection and certificate (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline prepared for license plate holder, single-row Contour marking with reflective strips according to ECE R 048, white on the sides and red at the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rusting Support legs, black coated Tipper body, RAL color of your choice, solid color Rolltarp, RAL color of your choice, solid color Available in a thermally insulated version!

Condition: used, Year of construction: 2018, Manufacturer : SPXFLOW Lightnin Model : HP-25 A Year: 2018 Type : Stirrer Kdjdpfezcznyjx Anwon Diameter of the stirring blade: 110 mm Length of the stirring shaft: 825 mm Shaft diameter: 12.5 mm Required pressure: 6 bar Manual pin-type lifting system Lifting stroke: 36 cm Maximum width of a container: 72 cm Dimensions: floor to >mixing head (lower position): 55 mm Dimensions: floor to >agitator head (top position): 415 mm Dimension : 110 x 103 x 150 cm Technical documentation available

Condition: used, Year of construction: 2018, operating hours: 18,735 h, lifting height: 4,870 mm, free lift: 1,620 mm, fuel type: electric, mast type: triplex, fork length: 1,190 mm, fork width: 1,150 mm, total height: 2,260 mm, total length: 2,320 mm, total width: 1,190 mm, color: silver, Empty weight: 4.651 kg Lifting capacity: 2.500 kg - Year: 2018 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 516345J00644 - Operating hours: 18735 - Lifting capacity: 2500kg - Lifting height: 4864mm - Overhead clearance: 2260mm - Free lift: 1620mm - Fork length: 1190mm - Maximum fork width: 1150mm - Minimum fork width: 200mm - Number of wheels: 4 Wheels - Attachment: Side-shift, Fork positioner - Options: Full cabin, Joystick, Free-lift, Work lights - Mast: Triplex - Drive: Electric - Battery information: Kedezcyzlepfx Anwsdn - └ Brand/Type: 4 PzS 620 - └ Battery year of construction: 2019 - └ Capacity: 620Ah - └ Battery voltage: 80V - Transport dimensions: 2328mm x 1199mm x 2260mm (l x w x h) - Transport weight [kg]: 4651kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Tess van den Boom

Condition: like new (used), number 4 Stück weight 3,8 kg/Stück range L-W-H 180 x 70 x 90 mm Mounting block B50 - (Item No. Holding force 50 kN) This mounting block, made from high-strength aluminium, is an ideal complement to clamping elements in the MQ series and, to a limited extent, the S series, where clamping heights vary. Applications include forming technology and machining technology --> Height = 90 mm --> Length = 180 mm Ksdpfx Anjzdk Epjwedn Price per unit, discount available for bulk purchases

Condition: used, Year of construction: 2000, functionality: fully functional, total width: 1,000 mm, total length: 3,650 mm, total height: 1,850 mm, overall weight: 600 kg, 1 Hambi Mattenschneidemaschine TV 25 V, working width 2.50 m, year of manufacture 2000, max. 12 mm single bar or 8 mm double bar, cutting time forward/backward approx. 13/10 sec. Connected load 3 kW. Ksdjvxtc Dopfx Anwedn

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, Hydraulic press brake LVD PPEB-EQ 80/25 CADMAN CNC Year of manufacture: 2006 Serial number: 30734 Technical specifications Pressing force: 800 kN Ksdpfey Avnpsx Anwedn Working length: 2,500 mm Distance between uprights: 2,050 mm Stroke: 200 mm Distance table – ram: 400 mm Gap: 400 mm Table width: 150 mm Approach speed: 130 mm/s Working speed: 11 mm/s Return speed: 115 mm/s Weight: 6,200 kg Motor: 7.5 kW Control CADMAN CNC, 6 axes • Back gauge X-mono-R-Z1-Z2 • LVD style upper tool

Condition: good (used), Code: 0414 Brand: SCM MINIMAX Model: ME 25 - CE Standard Automatic edge bander for joinery, furniture, custom-made furniture, panels, doors, kitchens and various – CE Standard – Year 2017 Technical data: Thickness of roll edge 0,4–3 mm Max edge thickness 5 mm Min/max panel height 12/50 mm Panel feed speed 7 mt/min Work surface height 904 mm Min panel length/width 190/65 mm High-grip toothed feed belt Panel support roller conveyor along the entire length of the machine Composition: Kdjdpfjzfapmox Anwsn Gluing unit: Glue tank capacity 1 kg – Motor power 0,18 Kw End cutting unit: Motor power 0,37 Kw – End trimming blade diameter 90 mm Z 20 – Blade rotation speed 12000 rpm Overlapping trimming unit: Upper and lower motor power 0,75 Kw – Vidia cuttersn diameter 75 mm Z 4 – Cutter rotation speed 12000 rpm Edge scraper unit for finishing Pvc/Abs edges Glue scraper unit for removing any excess glue Suction inlet diameter 120 mm Overall dimensions mm 1950 x 700 x 1250 h Weight kg 430

Year of construction: 2020, condition: excellent (used), functionality: fully functional, Graco Tank-Free Hotmelt Delivery System Invisipac HM 25 Year 2020 For delivering and dispensing hot melt adhesive pellets. For professional use only. 1200 psi (8.3 MPa, 83 bar) Maximum Working Pressure 400°F (204°C) Maximum Fluid Operating Temperature 100 psi (0.7 MPa, 7 bar) Maximum Air Inlet Pressure Proven adhesive savings, unsurpassed reliability. Unlike conventional tanks and many "tankless" systems, the InvisiPac system's patented Melt-on-Demand technology ensures a constant flow of adhesive that melts quickly and is dispensed instantly. You save adhesive and costs due to unplanned downtime for maintenance. With the InvisiPac system's robust reporting capabilities, you have the data you need to make smart decisions for your line that can increase efficiency, reduce costs, minimize downtime, and improve productivity. Kodpfx Aewigbmjnwjdn Better performance: No clogged nozzles; No carbon-filled containers; Fast startup in as little as 10 minutes; Improved operator safety; High performance with a sustainable component; Greater cost savings; Consistent adhesive viscosity; No material damage; Little to no waste; Better dispensing control; Use the adhesive of your choice

Condition: good (used), Thread cutting chuck, thread chuck, tap chuck, milling tool, thread cutting attachment, quick-change thread cutting chuck, quick-change thread chuck Kdjdozcu Srepfx Anwjn -Manufacturer: Holex, Thread cutting chuck, quick-change thread chuck, 7 pieces -Type: 335620-10 -Size: M5 to M20, see photos -Submission/Price: complete -Transport dimensions: 330/120/H70 mm -Weight: 4.4 kg

Condition: excellent (used), CTS Temperature Test Chamber T-40/25 Technical Data Manufacturer: CTS Clima Temperatur Systeme Type: T-40/25 Temperature Range: -40 °C to +180 °C Test Chamber Volume: 25 liters Temperature Change Rate: Heating: 8.0 K/min Cooling: 6.5 K/min Temperature Deviation over Time: ±0.5 to ±1 K Test Chamber Dimensions (W x D x H): 350 x 240 x 300 mm External Dimensions (W x D x H): 595 x 580 x 860 mm Electrical Data: Rated Voltage: 230 V 1/N 50 Hz Rated Power: 1.86 kW Rated Current: 8.53 A Protection Class: IP20 Refrigerant: R404A Filling Quantity: 0.8 kg Operating Pressure: 25 bar Ksdpfx Anozcxmtjwodn Test Pressure: 20 bar Features: LCD control panel Digital setpoint/actual value display RS232 interface Stainless steel test chamber material 1.4301 Window 200 x 200 mm Lockable door Air-cooled refrigeration unit EASYLog data logger 3 stainless steel shelves Weight: approx. 90 kg For the safety of our customers, the following work will be carried out on the offered climate chambers in advance: 1. Functional check and replacement of necessary components 2. Refilling with legally compliant refrigerant, if necessary 3. Leak test with certificate 4. Documented test run after successful inspection Condition: used Scope of supply: (See picture) Inspection possible by appointment. Loading can be arranged. (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: excellent (used), functionality: fully functional, mileage: 19,000 km, power: 164.75 kW (224.00 HP), first registration: 12/1998, fuel type: diesel, axle configuration: 4x4, wheelbase: 3,600 mm, fuel: diesel, color: red, driver cabin: other, gearing type: mechanical, Equipment: additional headlights, all wheel drive, differential lock, fog lights, trailer coupling, truck registration, MAN TLF 16 / 25 bodywork Metz, all-wheel drive Crew cabin for 1 + 5 Differential locks Kdedowhfl Uspfx Anwjn around 19,000 km First registration 12 / 1998 2400L tank Light mast at front wall of body Perimeter lighting Roof box Storage for power/lighting Snow chains PA cabin S-attack hose reel Branch guard Martin siren system Front flashers New inspections (roadworthiness/emissions/safety) available upon request at extra cost Price upon written enquiry -Sale only to authorities and commercial customers-

Condition: good (used), 9 pieces, each with a circuit board Removed from an Arburg 420 C Selogica Kjdpfx Aszdktgenwedn 100 EUR per piece 600 EUR for the entire set

Condition: ready for operation (used), Column drill press GILLARDON GB 25 -Drilling capacity / steel 32 mm -Drilling capacity / cast iron 35 mm -Speed range - stepless 60 - 1800 rpm Kdjdpfx Anjzdb H Sewsn -Direction of rotation / right - left -Morse taper MK 3 -Overhang 290 mm -Quill travel 175 mm -Table area 450x360 mm -Table height adjustment by means of hand crank -Threading device -Coolant system -Drill chuck -Analog speed display -Foot switch -Emergency stop -Documentation Dimensions: L x W x H 0.7 x 0.7 x 2 meters / Weight: 490 kg Errors and omissions excepted.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: Syst.no. 105, Used roller conveyor from the manufacturer Mannesmann Demag 3m straight pieces, come from a 2-story transport system. Kdjdpfx Aewliuzsnwsn 1 piece 3m long; Negotiable price for larger purchase quantities!! Other parts also available, please ask.

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm Ksdjx Suzaopfx Anwedn * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: used, functionality: fully functional, Year of construction: 2015, operating hours: 5,475 h, load capacity: 2,500 kg, lifting height: 3,670 mm, fuel type: electric, mast type: simplex, construction height: 2,525 mm, fork carriage width: 1,040 mm, fork length: 1,200 mm, drive type: Elektro, Electric 4-wheel forklift Load center: 500 Mast type: Standard Condition: Refurbished, without warranty Kedpfx Anjyn Amhjwsdn Technical condition: very good Front tire type: Non-marking Front tire condition: 80 - 100% Rear tire type: Non-marking Rear tire condition: 80 - 100% Battery voltage: 80V Battery capacity: 620Ah Battery type: PzS Description: Overhauled, serviced, and inspected according to FEM 4.004 (UVV). Completely repaired, serviced and checked. Side shifter, fork positioner, 3rd valve, 4th valve, rear work light, front work light, heater, full cabin, safety light, rotating beacon.

Condition: good (used), Electronic self-centering through-feed clamping device NC400 control unit Adjustable dimensions: Length: from a minimum of 250 mm to a maximum of 2500 mm Kdedezfpulspfx Anwen Width (depth): from 180 mm to 780 mm Minimum height: 300 mm, maximum height: 1300 mm

Condition: excellent (used), functionality: fully functional, Eccentric press Inventory No. 01 Manufacturer: ter Hart Type: EP 25 Press force: 25 tons * Stroke adjustment: 6 to 60 mm * Adjustable ram: 35 mm * Table dimensions: 360 x 320 mm * Installation height: 275 mm * Overhang: 175 mm * Foot pedal operation Kdjdpfx Anjzcf Hyowen * Connection: 1.5 kW * Weight: 850 kg * Control panel with emergency stop (2 units)

Condition: excellent (used), functionality: fully functional, Eccentric press Inv. No. 02 Manufacturer: ter Hart Type: EP 25 Pressing force: 25 tons Kdodpfozcf E Ajx Anwsn * Stroke adjustment: 6 to 60 mm * Adjustable ram: 35 mm * Table dimensions: 360 x 320 mm * Installation height: 275 mm * Overhang: 175 mm * Foot pedal operation * Connection: 1.5 kW * Weight: 850 kg * Control panel with emergency stop (2 units!!!)

Condition: used, Year of construction: 2015, operating hours: 12,440 h, functionality: fully functional, travel distance X-axis: 250 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 185 mm, nominal power (apparent): 30 kVA, spindle speed (max.): 42,000 rpm, input voltage: 415 V, type of input current: three-phase, Matsuura Lumex Avance-25 – Hybrid Additive Manufacturing System (used) For sale is a Matsuura Hybrid Additive Manufacturing System, Lumex Avance-25. This system combines additive manufacturing (sintering) and subsequent machining (milling) in a single process. As such, the system is particularly suitable for applications where functional surfaces or precise geometries are to be machined directly after the build. The system is designed as an open system: build parameters can be adjusted and further developed at the user’s discretion and based on their own experience. This also makes it ideal for research purposes and for the development of new material and process parameters. The Lumex Avance-25 is configured for titanium; the air filter and extraction system are explosion-proof for powder handling. The following powder types can be used: Martensitic steel II (1.2709) Stainless steel 630 Stainless steel 316L Cobalt chrome Nickel alloy 718 (Inconel 718) Aluminum Si10Mg Titanium 6Al4V (with corresponding shielding gas supply) Kodpfxjy Drwvs Anwedn It is possible to build with other materials or powder types if the build parameters are appropriately determined. Details: Year of manufacture: 2015 Spindle hours: 12,439 Laser hours: 3,476 Possible build size: approx. 250x250x180 Max. table load: 90 kg Laser power: 40-400 watts (variable adjustment) Laser wavelength (nm): 1070 +/- 5 Tool positions for milling tools: 20 Accessories: Lumex CAD/CAM system Basic and Advanced function for sintering Basic and Advanced function for milling Geometry processing Simulation Generation of process data Transfer of process data Support function for processing and quality 1x Ruwac industrial vacuum cleaner 1x Ruwac wet separator NA35 for potentially explosive materials.

Condition: new, functionality: fully functional, Year of construction: 2024, operating hours: 5 h, load capacity: 2,500 kg, lifting height: 4,700 mm, fuel type: diesel, mast type: triplex, power: 36 kW (48.95 HP), fork carriage width: 1,470 mm, fork length: 1,200 mm, empty load weight: 4,350 kg, total length: 3,084 mm, drive type: Diesel, construction width: 1,350 mm, Rough terrain forklift Load center: 500 ISO class: ISO Class 2 = 1,000 - 2,500 kg Mast type: Triplex Transmission: Hydrostatic Speed class: 20 Condition: New Technical condition: very good Front tire type: Pneumatic Front tire size: 300-15 Front tire condition: 80 - 100% Rear tire type: Pneumatic Ksdpfx Anezc Samjwsdn Rear tire size: 7.00-12 Rear tire condition: 80 - 100% Description: The MSI 25 is a versatile mast forklift and unique in its class. It can be used in the wood and paper industry, in recycling, in logistics applications, etc. Whether in industrial buildings, in the yard, or on light terrain, the hydrostatic transmission, combined with the powerful engine and two large-diameter drive wheels, enables precise and smooth operation. This machine ensures daily productivity gains. For efficient maneuvering, the MSI 30 features a steering axle with an integrated cylinder, giving it a very small turning radius. Thanks to the numerous available attachments, the MSI 30 is extremely versatile and suitable for lifting, loading, unloading, and storing long loads. It has a lifting capacity of 3.0 t. Side shifter, 3rd valve, half cab, full cab, full free lift, CE certificate.

Condition: used, Year of construction: 2003, Used machine Year of manufacture: 2003 Equipment and technical data: - Motor 15 kW - 400 V - 3000 rpm - Dust extraction port diameter 250/300 mm - Dimensions: approx. 900 x 750 x 1000 mm - Weight: approx. 190 kg Kdjdpfxszdlwgs Anwsn Availability: short-term Location: 63934 Röllbach

Condition: new, Year of construction: 2021, weight / kg Kdjdpfjzcq N Tox Anwen

Year of construction: 2025, condition: excellent (used), functionality: fully functional, We offer an unused single-screw extruder from stock. The system was operated exclusively for test purposes and is therefore in excellent, near-new condition. Ideal for laboratory use, material development, small-scale production, or custom extrusion applications. Kdedpexxim Ijfx Anwsn Technical Data & Features • Screw diameter: 30 mm • L/D ratio: 25:1 • Condition: unused / only test runs • Drive: 4 kW SEW motor with gearbox • Heating zones: 4 zones with temperature controllers • Control cabinet: included in scope of delivery • Die: strand die can be adapted or manufactured new upon request • Design: robust laboratory / pilot-scale construction • Mobile: base plate with heavy-duty castors – easy to position Special Features • Very compact design • Ideal for filament, profiles, lab trials and material testing • Barrel and screw in excellent condition (see photos) • Immediately available from stock