Used Hydac Hydraulic Filter Ventilation Filter for sale (23,556)

Year of construction: 1981, condition: good (used), machine/vehicle number: 3626, OFFER 21448 Technical data: - max. working width 2540 mm - max. cutting capacity St 40 4 mm - motorized cutting angle adjustment - cutting gap adjustment by means of graduated adjusting screws - number of hydraulic clamping bars 14 pcs - motorized rear stop with positioning 10 - 1000 mm - number of strokes depending on cutting angle and cutting length 23 per minute - hydraulic drive 400 V / 7.5 kW Bsdpfxjhhc Ixo Afwjdg - table height 1030 mm - space requirement approx. W 2500 x H 1630 x D 2150 mm - weight approx. 3600 kg - including: - sheet metal lifting with pneumatic assistance - front angle stop + support arms - electronic cutting depth adjustment - cutting line illumination - electric foot switch

Condition: as good as new (ex-display), Year of construction: 2020, pressing force: 400 t, Hydraulic 400 to column press suitable for continuous shift operation, with these basic data: a) Closing speed 100 - 450 mm/sec. b) Opening speed 50 - 250 mm/sec ( adjustable via touch screen ) c) Pressing speed 5 - 60 mm/sec ( adjustable via touch screen ) d) Piston accumulator with approx. 4 nitrogen bottles e) Table size (clamping surface) 2700 x 1700mm ( seen from the front, between the columns ) f) Total table size 3400 x 1700mm g) 28 T-slots according to customer requirements h) Table, ram and press head are annealed stress-free. i) column diameter 250 mm j) slide size 3400 x 1700mm (clamping surface 2700 x 1700mm ) k) Total size of the machine approx. 3900 x 2200 ( at the bottom ) x 5700 mm height l) Oil temperature monitoring ( adjustable via touch screen ) m) Automatic lubrication ( adjustable via touch screen ) n) Free positioning of the ram ( adjustable via touch screen ) o) KEYENCE light barriers 14 mm on front and rear side p) Circuit oil cooling ( adjustable via touch screen ) q) Pressure holding valve 0 to 600 sec. ( adjustable via touch screen ) r) Table top size 3400 x 1700mm, plane milled s) Laterally monitored doors, 1200mm high, 1000mm wide Bdjdpfjg Iihwjx Afwog t) RITTAL control cabinet, 2200 mm wide, up to 20 m from the press u) Pressure setting from 50 to 400 tons ( adjustable via touch screen ) v) Travel limitation optionally via pressure or position w) Programming mode, set-up mode, single stroke + continuous stroke (adjustable via rotary switch ) x) Swivelling control panel with 15 inch touch screen monitor y) Two-hand operation on both sides z) Prepared for automatic material feed ( SIEMENS S 7 1500 ) aa) Machine body primed and painted bb) assembly, commissioning, instruction against separate charge The hydraulics of the presses we offer are completely based on BOSCH-REXROTH/Parker/HAWE components. In the switch cabinet only components are used (SIEMENS) which are easily available in Germany. The safety technology comes completely from SICK except for the light barriers. The control system is supplied by SIEMENS. ( S 7 1500 ) as well as the touch screen monitor with 15 inch. The SIEMENS remote maintenance unit SECOME -Ethernet is included in the scope of delivery. SPECIAL FEATURE: the design chosen by us with two press cylinders and the piston accumulator make it possible to supply the full power with a main motor of 90 kW. Below under 1.3 the technical details Technical data Press design Press design Column press Thermally neutral 80 - 120 °C Number of operating sides 2 sides Forces Pressing force max. 4,000 kN Free ripping force max. 600 kN Pressure build-up time Closed tool steel to steel Max. 2 sec. Dimensions - intended minimum tool height 600 mm Max. Opening width 1600 mm Stroke and min. opening 1000/600 mm Table height above floor 820 mm Height above floor (headroom) approx. 5700 mm Hall height min. 7000 mm Parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.17 mm/m Weight Total weight of the press without operating materials approx. 52 To Speeds ( see attached cycle diagram ) Fast closing 100 - 450 mm/s Pressing speed At F max.

Condition: new, Year of construction: 2021, pressing force: 17 t, Here are the technical data of the offered machine: If the press does not exactly match your requirement profile, please click to request an individual offer exactly according to your needs: Contact us for an individual offer HIDROBRASIL manufactures presses exactly according to your requirements at surprisingly low prices! Technical data + information: Hydraulic 17 T single column press Single column press with 17 T capacity, suitable for continuous shift operation, with these basic data: a) Traversing speed 10 mm/sec. downwards, b) opening speed up to 25 mm/sec c) starting pressing speed 10 mm/sec. d) table size 400x400 mm e) ram size 200x200 mm, with T grooves and central cylinder clamping f) Overall size approx. 1150x800x1750 mm g) oil temperature display on oil tank h) pressure adjustment from 5 T to 17 T ( adjustable by knob ) i) Hand lever operation with two speeds j) Machine body powder-coated, or double-painted k) Control cabinet supply line from above with 3000 mm cable and 16 Ampere plug l) assembly, commissioning, instruction against separate calculation Press design Single column press Thermally neutral 80 - 120 °C Number of operating sides 1 side Forces Press force max. ( at 250 bar ) 170 kN Free ripping force max. 10 kN Pressure build-up time Closed die Steel to steel Max. 2 sec. Dimensions Max. Opening width 250 mm Stroke and min. opening 100 mm Table height above floor 850 mm Height above floor (headroom) approx. 2200 mm Hall height min. 2.500 mm parallel deviation at 20°C +/- 0,1 mm Deflection Determined at max. clamping force with 70% occupancy < = 0.3 mm/m Weight Total weight of press without operating materials approx. 1 to Speeds Fast closing with 10 mmSec. Press speed 10 - 0 mmSec Sound pressure Sound pressure level, measured at 1.5m height at the control panel according to DIN 45635-T16-KL3 max. 78 db(A) Bdodpfx Aegrki Sjfwjg Hydraulics Number of pressing cylinders 1 pcs. Operating pressure max. 250 bar Pressing pressure build-up time . 2 sec. Pressure accuracy during pressing stroke +/- 5 bar Main pump Gear pump approx. 6 L/min Oil volume approx. HLP 46 MW 100 liters Ambient temperature max. 40 °C Oil temperature max. 55 °C Flow temperature °C Electrical system Main supply 400 V AC Control voltage hydraulic pumps 24 24 V DC V DC Frequency 50 Hz Hydraulic connection Main motor 2.2 kW Total connection Approx. 3 kW Design The press is designed as an oil-hydraulic single-column press. The hydraulic system and the tank are located on the top and inside of the press, respectively. Hydraulic unit The hydraulic system is mounted on the top of the press. Safety devices For the scope of delivery described, the press complies with the valid safety regulations according to UVV, as well as with the standards and directives valid for the EU, in each case in the latest version. Electrical system / control system The control cabinet with control, power and safety components is located on the right side of the press. The press is operated by a hand lever control.

Year of construction: 2023, condition: new, New machine Stainless steel model 24 months warranty Advantages: + Excellent price-performance ratio + Robust hydraulic dough divider with a rectangular stainless steel frame + Complete machine with stainless steel cladding + Mobile machine + Teflon-coated cutting and punching grids, easy to replace + Food-grade plastic pressing segments + Stainless steel blades for dividing dough pieces up to a maximum of 19 kg of dough, 20-piece division + Enables traditional, manual dividing and shaping of dough + Punching grid: profiled POM plastic blades, food-grade, for excellent sealing of the dough edges + Ideal for very soft doughs (baguettes, ciabatta, focaccia, sourdough breads, rye breads) + Smooth-running and dust-protected motor + Easy and quick to clean + Fast supply of spare parts within 1-2 working days STANDARD accessories, included in the price: Bsdpfsivdp Nox Afwodg + 2x Teflon-coated stainless steel grids (see PDF / grid catalog) + 1x Soft-Press base, for gentle punching of the dough OPTIONAL accessories, available on request: - Stainless steel tray trolley incl. 14 trays + lids, adapted to the DivOtrad system + €890.00 net / trolley + €100.00 net transport / trolley - Dough tray for cooling / storing the dough after dividing, with lid + €49.50 net / tray - Additional Teflon grids (see PDF / grid catalog) + €350.00 net / piece - Additional Teflon grids with POM plastic blades (1- and 2-piece division, see PDF / grid catalog) + €620.00 net / piece Technical data: - Motor power: 2.2 kW - Protection: 16A-CEE plug - Connection values: 400 V - 3Ph - 50Hz - Dimensions: --- Lid open: 720 x 632 x 1700 mm (W x D x H) --- Lid closed: 720 x 632 x 1200 mm (W x D x H) - Net weight: 285 kg

Condition: new, axle configuration: 3 axles, Year of construction: 2025, GVN Trailer 3 Axle Exclusive Lowbed Bjdpfxoqxbcno Afwodg    Please get contact with us for more informaiton;  

Condition: good (used), Code: 0158 Brand: ITALPRESSE Model: LOCK FORM SYSTEM AIR - CE Standard Hydraulic air membrane press with loading and unloading - CE Standard 3-D coated on one face lamination of veneer to panels shaped or profiled on one face and flat on the other to produce cabinet door raised panels, drawer fronts, desk tops, table tops, kitchen tops, etc. Bdedepvk Diepfx Afwsg 3-D lamination of plastic foils (PVC, PPE, ABS, Transfer foil ) to panels sheped or profiled on one face to produce: cabinet doors, drawer fronts, desk tops, table tops, kitchen tops, store fixture components, room doors, etc. Platen dimensions mm 2650 x 1250 Piece height mm 55 Pressure control manometer Automatic pressure reset Opening timer

Condition: excellent (used), functionality: fully functional, Year of construction: 2009, DURMA CNC vertical cutting hydraulic shear model VS 4020 of 4080 x 20mm, with CNC Cybelec mod 60, motorized stop, installed power 45Kw, in a pre-owned condition, year 2009, 29 tns Bdedpfx Aonpxqaofweg

Condition: as good as new (ex-display), Year of construction: 2025, Hydraulic CNC press, 100 tons (1,000 kN) pressing force Siemens SPS1200 series 10" Beijer display Stroke 400 mm Table size 790 mm x 600 mm Feed speed 110 mm Return speed 140 mm Bdodpfonp Ndhsx Afwog Sick light curtain Remote maintenance module installed Rexroth hydraulics with cooler Modifications can be implemented upon request Upon request, the manufacturer can supply C-shaped frames for presses with a pressing force of 10 tons to 400 tons and variable dimensions.

Condition: good (used), Year of construction: 1991, Used Hosokawa MikroPul filter Model Type 8 HP VC 1200-325 Volume 9980l Weight 2200kg Bdsdpfxsufy S Hj Afweg

Condition: used, Year of construction: 2020, load capacity: 4,500 kg, Telescopic forks ISO class: ISO class 3 = 2,500 - 4,999 kg Bjdet Tanxopfx Afwedg Condition: Ready for use and fully functional Technical condition: Good Description: Capacity 4500 kg ISO 3A (51 cm) Opening range 1550-2350 mm ID OS1264

Condition: used, Year of construction: 2017, load capacity: 4,500 kg, Telescopic forks ISO class: ISO class 3 = 2,500 - 4,999 kg Bodpet Tan Ssfx Afwsdg Condition: Ready for use and fully functional Technical condition: Good Description: Capacity 4500 kg ISO 3A (51 cm) Opening range 1550-2350 mm ID OS1266

Condition: new, Year of construction: 2024, functionality: fully functional, machine/vehicle number: HAW07.5-2-22-T96, overall weight: 100 kg, total length: 600 mm, total width: 400 mm, total height: 900 mm, input voltage: 400 V, type of input current: AC, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), operating pressure: 250 bar, Equipment: hydraulics, Hydraulic power packs from 1.1 to 22 KW output ⦁ Drive type electric motor - petrol engine - diesel engine or PTO driven ⦁ Hydraulic oil tank 36L - 96L - 144L - 250L or according to customer requirements Bsdpfet U Uiaox Afwedg ⦁ Hydraulic pump Gear pumps or axial piston pumps ⦁ Additional components such as valves and control technology ⦁ Tank size 36L - 96L - 144L - 250L or according to customer requirements (customer drawing)

Year of construction: 1992, condition: used, machine/vehicle number: 207320; Lg-Nr. 09361, Technical specifications: - Maximum working length 1250 mm - Distance between uprights 1050 mm - Maximum pressing force 80 t - Stroke 250 mm - Distance from upright to center of slide 300 mm - Maximum installation height between table and press beam 560 mm - Stroke speeds - Downward speed, no load, max. 100 mm/sec - Upward speed 100 mm/sec - Downward pressing speed max. 12 mm/sec - Total drive power 15 kW - Space requirement approx. W 1750 x H 3400 x D 2000 mm - Weight approx. 8500 kg - including: Bdjdpfx Afob Rk Ekswsg - CNC control CYBELEC DNC 7400 PSGY - Controlled X-axis rear stop 5 – 1000 mm - Z-axis with three-stage pneumatic height adjustment - Manually adjustable and foldable stop fingers - Controlled pneumatic die shifting - Hydraulic tool clamping - Manual crowning - 2 support arms - Point tool, split, H 320 x L 1000 mm - Deerfoot tool, H 320 mm x L 1000 mm - Universal die, L 1000 mm

Year of construction: 2017, condition: as good as new (ex-display), machine/vehicle number: 6151550180, Demonstration tool: hydraulic high torque wrench LP2 from TITAN without link Bjdsdv Scfspfx Afwsdg Torque range: 363 to 2476 Nm Downforce: suitable for screwdrivers (wrench size SW 19 to SW 60) Links are optional and not included Weight: depending on the cassette from 2.56 to 3.16 kg Total length with cassette: 226.1 mm Total height: 31.8 mm Advantages: -Patent Multi Axen connection: Freely movable hose, multi-positioning of the hose -Flat design: Fits easily on all tight spots - Unique broad-gauge teeth -Modular concept Characteristics: -Certified accuracy +/- 3% -The Titan WIDE Track ratchet-tooth design distributes the force evenly, it provides a larger contact surface and thus brings the power to solve the-bolt case perfectly - every time - Handcrafted from the highest quality aviation materials for ultimate strength and durability (AQ Grade 7075-T6 Alloy) - Low profile and flat design for extremely tight spaces

Condition: new, functionality: fully functional, rope length: 30,000 mm, rope speed: 47,000 mm/min, machine/vehicle number: HAW1700-EV-Funk, Hydraulic winch for wood splitters, cranes, mini excavators, tractors, agricultural vehicles, viticulture, horticulture, and many other applications. The hydraulic attachment winch simplifies many tasks: - Pulling and positioning firewood to the wood splitter - Pulling logs onto trailers - Removing tree stumps and roots - As an attachment winch on forestry cranes and small excavators - As a winch for small tractors and narrow-gauge tractors A robust steel construction with 3-sided mounting options (left, right, rear) and 12 threaded holes offers many possibilities for attaching the winch (threads are cut and painted. They need to be re-cut with a thread tap before use due to the rust protection). A 20 m long and 6 mm thick steel cable is mounted. A large cable pulley ensures a long service life for the steel cable. We mount hydraulic motors from 50 to 630 cc (standard = 400 cc), depending on the speed and pulling force required. Maximum working pressure: 225 bar peak Continuous operating pressure: 175 bar Displacement: 400 cc Torque at 225 bar: 870 Nm peak Torque in continuous operation: 380 Nm Maximum pulling force: 1700 kg Weight: 49 kg Cable speed: 47 m/min at 60 L/min hydraulic oil Color: red Bdodpfxodf Ufpo Afwjg Dimensions: Length: 500 mm Length with swivel: 570 mm Front width: 120 mm Rear width: 180 mm Bearing width: + 30 mm Motor width: + 200 mm Height: 250 mm The winch is available for mounting or welding. This version includes an electric hydraulic valve, remote control, and hoses to the motor. Article number: HAW1700-EV-Funk

Condition: new, Year of construction: 2025, functionality: fully functional, filter unit special for laser machines till 6 KW laser head Bdsdpfx Aotttfcjfwsg

Condition: as good as new (ex-display), Year of construction: 2023, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Exhibition machine from 2023 with only approx. 2x operating hours condition like NEW special price on request Bodpfx Afjw U U Svjwedg Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions

Condition: good (used), Year of construction: 2003, machine/vehicle number: 42058, Offer 20223 Technical data: - Operation via hand-held remote control with cable - Load capacity: 1000 kg - Platform size: 1250 x 800 mm - Min. lift table height: 280 mm - Max. lift table height: 950 mm - Lift stroke: 670 mm - Hydraulic drive: 400 V / 1.1 kW - Required space: approx. W 1300 x D 900 x H min. 280 mm - Weight: approx. 150 kg - Mobile undercarriage Bdsdpfx Afsxdivyoweg

Condition: good (used), GATTI HYDRAULIC BENDING MACHINE 4000X80 TON, 4 AXES, 200 mm RECESS. DIMENSIONS 440X180X270(h) cm, WEIGHT: 7100 KG Bdedpevzyzfsfx Afwjg

Condition: used, Year of construction: 1981, machine/vehicle number: 55848, Lg. No. 24029 Technical Specifications: - Saw blade diameter up to 400 mm Bedpfewk Icbsx Afwjdg - Cutting range at 90°: round 130 mm - square 120 mm - rectangular 300 x 40 mm - or 240 x 85 mm - at 45°: round 130 mm - square 110 mm - rectangular 245 x 40 mm - Miter adjustable left and right 0 - 90° each - 2 cutting speeds 13 + 26 m/min - Drive 400 V / 1.2 / 1.8 kW - Saw blade feed speed continuously adjustable hydraulically - Coolant system - Automatic material refill system - Space requirement approx. W 2400 x H 1850 x D 1100 mm - Weight approx. 1250 kg

Year of construction: 2022, condition: like new (used), Magnetic filter: Suspension height: 360 mm Magnet dimensions (W x L): 90 x 92 cm Suitable for belt width 1000 mm Bjdpsyftf Aefx Afwodg Air cooled

Condition: used, Mackey Bowley Hydraulic Press 100tonnes Capacity, 400mm Stroke, Table 700 x 750mm, Ram 160mm Diameter (Approx), Ram Base Plate Diameter 700mm, Model CM507/04 Bsdpfeyabf Hjx Afwjdg

Condition: good (used), Year of construction: 1997, machine/vehicle number: 68868, Offer 25500 Technical Data: - Cutting length: 3050 mm - Cutting thickness at 400 N/mm² tensile strength: 13 mm - Cutting thickness at 400 N/mm² tensile strength (up to 1000 mm length): 15 mm - Cutting angle: 0.5 – 3° Bedpfxjx A Tpno Afwsdg - Number of sheet hold-downs: 18 pcs - Strokes per minute: 10 – 23 min⁻¹ - Motorized backgauge up to: 1000 mm - Rear guard with light barrier - Front angular stop: 1000 mm - HSLX version: – CNC control HACO SC 5 Controller with input of sheet thickness in mm – Automatic cutting angle adjustment according to sheet thickness – Limit for cutting length – Automatic positioning of backgauge (8 programs – 80 sets) with digital display and automatic backgauge retraction – Motorized backgauge adjustment possible via 2 push buttons - Drive: 400 V / 22 kW - Electric foot switch - Space requirement without support arms: approx. W 4200 x H 2250 x D 2200 mm - Weight: approx. 8500 kg

Condition: repair required (used), Year of construction: 1980, functionality: limited functionality, For sale is a Hans Schön hydraulic press with a capacity of 650 kN. It was last used approximately 8 years ago. At that time, the machine had a problem with a hydraulic hose (possibly a broken hydraulic hose or a leaking connection). Bedpfx Aox Ehmyjfwedg This was not repaired because the press was no longer needed. Otherwise, the machine operated perfectly until the last use. The press does not have a valid safety inspection certificate.

Condition: excellent (used), Technical Details: Working width: 3100 mm Maximum bending capacity: 16.0 mm Maximum pre-bending: 12.0 mm Top roll diameter: 300 mm Side roll diameter: 270 mm All three rolls powered Hardened rolls Conical bending device by tilting of both side rolls Swiveling control panel with digital display Hydraulic drop end bearing Motor power: 7.5 kW Dimensions (L x W x H): approx. 5800 x 1700 x 1500 mm Net weight: approx. 8.5 tons Bedpjxyvx Tjfx Afwodg The seller is not liable for typing or data transmission errors. The machine's appearance, technical condition, and wear correspond to its age; used machines are sold without any warranty.