Used Hydraulic Glulam Press Modular, Custom Length, New 2025 for sale (66,486)

Year of construction: 1961, condition: ready for operation (used), A hydraulic single-column C-frame press Müller is available. Press force: 63t, stroke: 560mm, throat depth: 325mm, installation height: 700mm, table dimensions X/Y: 640mm/640mm, ram surface: 560mm/560mm, machine dimensions X/Y/Z: approx. 2000mm/1200mm/3100mm, weight: approx. 7500kg. The machine has a motor malfunction. An on-site inspection is possible. Podoy Rtg Ejpfx Amxsrb

Year of construction: 1995, condition: used, machine/vehicle number: 211045 H110, Response time: 133 ms, clamping force: 2,500 kN, control unit, two-hand operation, upstream light barrier, separate control cabinet, 1 workbench with a Garant two-jaw vise mounted on it, storage shelf. Psdezqzcrspfx Amxerb

Year of construction: 2019, condition: ready for operation (used), Pressing force: 4000kN, stroke: 300mm, table dimensions: 3100x1400mm, controls: Siemens S7, length: 4560mm, width: 2045mm, height: 4605mm, weight: 65t, with transfer system and soud-proof cabin. Pjdpfx Ajlyr Adomxsrb

Condition: good (used), Year of construction: 1994, functionality: fully functional, operating hours: 25,000 h, pressing force: 400 t, table width: 1,360 mm, table length: 2,000 mm, table height: 1,125 mm, oil tank capacity: 3,400 l, total width: 3,500 mm, total height: 4,600 mm, installation height: 600 mm, Further images and technical data can be provided by email upon request. Sale is ex-location without warranty and return. Dismantling and collection must be carried out by the buyer. The press is standing at ground level without a base. We deliver the press media-free. The digital hours counter is no longer accurate. The manual counter shows approximately 25,000 hours. Psdpfx Aevb D Trsmxjrb

Condition: used, Year of construction: 1980, Press force: 250 t Stroke: 250 mm Frame width: 1125 mm Side frame opening: 700 mm Shut height (stroke up): 800 mm Prjdozyl Hajpfx Amxjb Table area: 1100 x 900 mm Cushion force in table: 63 t Cushion stroke in table: 100 mm Cushion area in table: 700 x 400 mm Table height above floor: 960 mm

Condition: excellent (used), Year of construction: 2017, Pressing force: 8,000 kN Prsdoz A Tvxspfx Amxob Stroke: 2,000 mm Clamping area: 4,900 x 2,500 mm Max. tool weight: 50,000 kg Approach speed: 300 mm/s Working speed: max. 60 mm/s - min. 6 mm/s Weight without tool: 225,000 kg

Condition: good (used), Maximum pressing force 10 tons. Working pressure 16 MPa Cylinder stroke 400 mm Down speed 100mm/sec Speed up to 450 mm/sec Power requirement 5.2 kW Weight 1.3 tons Pedpfx Amjzvfqkexsrb Clamping table changed! Not an original table!

Condition: good (used), pressure 250 t passage width 700 mm stroke 850 mm table surface area 2000 x 1000 mm mould height - Max./min. 355 / 1200 mm total power requirement 30 kW Pedpexcblwjfx Amxerb weight of the machine ca. 25 t dimensions of the machine ca. 4,2 x 2,1 x 5,5 m

Year of construction: 1991, condition: ready for operation (used), Pressing force: 3200kN, stroke: 700mm, table dimensions: 2500x1300mm, weight: 63t, with documentation. Pedpfx Amslc N R Doxerb

Condition: refurbished (used), Year of construction: 2019, machine/vehicle number: DF0195 - Rev.00, pressing force: 40 t, pressure:40 t passage width:850 mm stroke:500 mm Weight of machine approx.:ca. 3,8 t dimensions:ca.1300 x 1800 x 3200 mm return capacity:4 t pestle plate:600 x 450 mm table plate:750 x 720 mm table height over floor:850 mm Oil cooling (electric):1,5 kW (max) max. working heidht:700 mm motor capacity:12,7 kW Prjdpsfhcc Hefx Amxeb Approaching Speed max. :140 mm/sec pressure speed:15 mm/sec Return Speed:140 mm/sec Oil Tank Capacity:160 l Monitor:WEG - 10 Zoll Siemens Control System:S7 1200

Condition: good (used), Year of construction: 2004, pressing force: 450 t, overall weight: 40,000 kg, AXIAL 4100x450tn + Cybelec ModEva 10 + 5 axes (Y1, Y2, X, R, Z) + WILA cnc compensation table + WILA hydraulic punch and die clamp Bending length: 4.100mm Force: 450tn Cursa: 365mm Axes: 5 axes (Y1, Y2, X, R, Z) *Z-axis (double prismatic guide nipples) WILA hydraulic clamping of punch and die WILA cnc compensation table Trancha working speeds: Approach speed: 110mm/sec. Working speed: 8mm/sec. Up speed: 90mm/sec Distance between uprights: 3600mm Neckline: 410mm Opening between table and truss: 500mm Pit penetration: 975mm Prsdpeu Au U Tefx Amxob Cnc: Cybelec ModEva 10 (Control CPU New as of September 2023) Laser safety: DSP LASER - TX Weight: 40tn Motor power: 30KW

Condition: good (used), Hydraulic press 10 tons. Installation height 400 mm Overhang 270 mm Width 1000 mm Without hydraulic pump Transport dimensions: Height without pallet 1440 mm Width 1000 mm Depth 780 mm Weight 325 kg Pjdszdufyepfx Amxjrb

Condition: used, Single-column eccentric press MÜLLER GEFREES Type 60 SV DK (identical to ExP60) Very little used eccentric press in original condition Machine no. 5250686 Year of manufacture 1986, like new condition Pressing force 60 tons Stroke 280 mm Table area 740 x 560 mm Ram area 385 x 200 mm Die opening in the table 300 x 200 mm Table area, table insert plate 740 x 560 mm Die opening in table insert plate Ø 103 mm Thickness of table insert plate 70 mm Dowel hole 40 mm Table height above floor 815 mm (with table insert plate) Installation height max. 275 (with table insert plate) Installation height max. 345 (without table insert plate) Stroke adjustment 10-90 mm Ram adjustment 60 mm Prodpsi A A Tbjfx Amxob Stroke rate 100 strokes/min Motor power 3 kW Drive power 380 Volt, 50 Hz - mechanical eccentric coupling with pneumatic control - spring-loaded brake controlled via cam - stroke release via pneumatic foot switch - overload protection with shear plate in the ram - table height adjustment via 2 threaded spindles - manual central lubrication system BEKA - operating manual and pneumatic diagram available Space requirement L x W x H 1400 x 1100 x 2200 mm Weight 3.4 tons very good condition, like new

Condition: excellent (used), I sell a Lukas baler in very good condition. Pedpsum Htzefx Amxerb

Year of construction: 2001, condition: good (used), Offer 20202 Technical data: - max. pressing force 35 t - projection to the center of the ram 240 mm - working height adjustable with hand crank 540 to 940 mm - 2 hand controls - protective screen enclosure with light barrier - material - insertion device - pneumatic connection - Press control via SIEMENS SIMATEC OP 7 - drive 400 V / 15,5 kW - Space requirement approx. W 1200 x H 2000 x D 2400 mm Podpfx Ajp Dt Tasmxsrb - Weight approx. 2500 kg

Year of construction: 1959, condition: used, The machine has various defects and would require an overhaul, defects: no operating manual, no safety valves for the return stroke (no dual-channel design), no safety valves for ram down, in single-stroke operating mode the stroke is automatically completed once the brake is reached, missing cover/door for the control cabinet, selector switch is not secured, there is a continuous-run operating mode which behaves similarly to the single-stroke operating mode, no simultaneity monitoring for ram down, the safety guard on the rear of the press is not electrically interlocked and can remain open during the press stroke, a large amount of oil in the side frame, valve leaking, the machine is operational. On-site inspection is possible. Prsdozv T Iwepfx Amxeb

Condition: excellent (used), functionality: fully functional, RÖCHER conversion 1991 (formerly SCHÖN) Pressing force: 1,600 kN Ram stroke: 160 mm Table dimensions: 850 x 650 mm Light curtain control system Next mandatory inspection: February 26 Clamping pin lock in the ram Rapid approach speed: 274 mm/s Psdpfsx Sw Iiox Amxjrb Working speed: 20/10 mm/s Return speed: 273 mm/s Drive power: 30 kW Operating voltage: 380 Volt/50 Hz Max. fuse rating: 100 A

Condition: used, Year of construction: 1971, pressure 200 t passage width NA mm stroke 180 mm table length 690 mm table width 530 mm Pjdpfxot Hw Dwe Amxsrb distance between columns 420 mm total power requirement 18 kW weight of the machine ca. t dimensions of the machine ca. m Hydr. 4-Pillar Press for Embossing/Calibration

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 6411, clamping force: 8,000 kN, "IMV Presse HPF-AZ80 Hydraulic Injection Molding Press Prjdpfx Aezhugxsmxjb 800ton with overhead hydraulic tank and robot loading system.

Condition: used, Industrial Hydraulic Press, Hydraulic press, 100t press, C-frame hydraulic press, HYDRAP PRESSEN HPS ZB 100, Used machine Manufacturer: HYDRAP PRESSEN GmbH (Plüderhausen, Germany) – Premium manufacturer of industrial press machinery Type: HPS ZB 100 Serial number (Fabrik-Nr.): 6535 Year of manufacture (Baujahr): 1991 Podpfx Ajzk Amromxjrb Weight: 14 700 kg Condition: Used, heavy-duty industrial design Technical and operating parameters: Permissible load / Pressing force (Zul. Belastg.): 1000 kN (approx. 100 tons capacity) Effective stroke (Nutzhub): 300 mm Drive type (Antriebsart): Hydraulic (HYDR.) Supply voltage (Spannung): 380 V Frequency (Frequenz): 50 Hz Type of current (Stromart): D (Three-phase AC / Delta configuration) Drive power (Antr.-Leistg.): 45 kW Rated current (Nennstrom): 90 A Oil viscosity (Öl-Viskos.): HLP 46 Oil capacity (Ölmenge): 780 liters Stopping distance (Nachlaufweg): 34 mm Stopping time (Nachlaufzeit): 112 ms Safety distance (Sicherheitsabstand): 192 mm

Condition: new, Year of construction: 2026, functionality: fully functional, power: 3 kW (4.08 HP), input voltage: 400 V, type of input current: three-phase, oil tank capacity: 90 l, total length: 1,600 mm, total width: 1,000 mm, total height: 1,600 mm, overall weight: 1,500 kg, Equipment: CE marking, documentation/manual, safety light barrier, Here is a shortened version comfortably below 3,500 characters, while keeping the important technical and sales information. OFFER OF THE WEEK! MTP HYDRAULIC CNC PRESS BRAKE 1320 MM / 40 T 2-AXIS X + Y | TOUCHSCREEN CONTROL Metal Technics Polska is a manufacturer and importer of professional CNC machines, laser systems and metalworking equipment. For 15 years, we have supplied reliable technologies to companies across Europe. The MTP 1320/40 hydraulic CNC press brake is a compact and efficient machine designed for accurate and repeatable sheet-metal bending. With a pressing force of 40 tonnes and a working length of 1320 mm, it is ideal for workshops and production companies looking for a practical and easy-to-operate bending solution. Prjdpfx Ajyr N E Esmxob MTP-3212 TOUCHSCREEN CONTROL The machine is equipped with the MTP-3212 touchscreen controller and 2 controlled axes: * Y axis – ram movement / bending depth * X axis – rear back-gauge positioning Controller functions include: * Touchscreen interface * Programming of bending operations * Storage of bending programs * Manual programming * Tool parameter management * SD card memory * X-axis back-gauge positioning * Y-axis bending-depth control AMADA-PROMECAM STYLE TOOL CLAMPING The machine is equipped with an AMADA-Promecam-style manual upper tool-clamping system, allowing convenient replacement and positioning of the segmented upper tooling. SAFETY EQUIPMENT * Side safety guards * Front safety light curtains * Secured rear working area * Emergency stop system * Automatic stop when the protected safety zone is breached TECHNICAL DATA * Nominal force: 400 kN / 40 t * Working length: 1320 mm * Controlled axes: X + Y (2 axes) * Distance between columns: 900 mm * Throat depth: 180 mm * Ram stroke: 100 mm * Maximum daylight: 290 mm * Back-gauge range: 500 mm * Approach speed: 80 mm/s * Working speed: 9 mm/s * Return speed: 80 mm/s * Main motor power: 3 kW * Dimensions: 1500 × 1300 × 1600 mm * Controller: MTP-3212 touchscreen * Tool clamping: AMADA-Promecam style * Crowning / compensation system: Not equipped The MTP 1320/40 combines compact dimensions, simple touchscreen operation and reliable hydraulic technology. The X + Y axis configuration provides automatic back-gauge positioning and control of the bending depth, making the machine suitable for individual jobs as well as repeat production. DELIVERY Delivery can be arranged throughout Europe and beyond. Transport costs are calculated individually according to destination. Please provide your delivery address or postal code to receive a transport quotation.

Year of construction: 1992, condition: ready for operation (used), Max. ram force: 1600kN, length: 3170mm, width: 2500mm, height: 5080mm, weight: 23t, with documentation. Prsdpfxelc N Ryj Amxsb

Condition: used, Year of construction: 1998, pressure 315 t stroke 500 mm throat 425 mm dayligth 1000 mm table surface area 1200 x 815 mm table height over floor 800 mm ram surface 1100 x 700 mm feed down 48 mm/s Podpszrppvofx Amxorb feed up 330 mm/s working feed 19 mm/s oil volume 1600 l power requirement 82,0 kW Weight 23,0 t dimensions of the machine ca. 2,4 x 2,8 x 4,0 mxmxm with oil-hydraulic drive, controllable dependent on pressure/time and way, light-guard at front (Sick), two-hand operation

Condition: excellent (used), Year of construction: 2001, - 1 Schuler press - Capacity: 1000 tons - Stroke: 1,300 mm - Die cushion tonnage: 30 - 200 tons - Die cushion stroke: 200 mm - Daylight between press frames (Pmi): 800 mm - Work area: 2,500 x 2,100 mm - Movable tables for press: 2 Prodpfozy Uuyox Amxjb - Approach speed: 600 mm - Working speed at 50%: 96 mm - Working speed at 100%: 46 mm

Condition: excellent (used), Heavy hydraulic press for forming, compression molding, stamping of wooden and non-wooden materials. Single-opening/daylight (with No. 2 plattens) PLC tipo EC 609 Plattens dimensions mm 1900 x 600 Psdezyixajpfx Amxsrb No. 4 vertical hydraulic pressure cylinders Total pressure 800 Tons Up-stroke of the cylinders Max opening between the plattens mm 325 approx.