Used Indor Dg90-50 for sale (33,387)

Condition: new, Year of construction: 2026, functionality: fully functional, warranty duration: 24 months, total length: 1,010 mm, total width: 630 mm, total height: 1,220 mm, tank capacity: 80 l, empty load weight: 320 kg, power: 3.75 kW (5.10 HP), electrical fuse: 16 A, New machine with a 24-month warranty Advantages: + Robust construction + Boiler, central shaft, and spiral made of stainless steel + Drive system with two motors (spiral & boiler) + Mobile machine, on swivel wheels, with a fixed boiler + Flour dust hood closes gently with dampers, with automatic shut-off + Dirt protection cover for the feet + Short kneading time with excellent results + Control panel with push buttons for easy operation, with 3 timer clocks + 1 reverse gear for mixing, 2 forward gears for kneading + Up to 99 different mixing/kneading programs can be saved + Switch for manual or automatic operation + Fast supply of spare parts within 1-2 working days Machine in stainless steel design: - Additional cost: + €2,080.00 net Technical data: - Flour capacity: 4 - 30 kg - Dough capacity: 6 - 50 kg Kedjhyc Thopfx Afvodl - Boiler volume: approx. 80 liters - Ø outer edge of the boiler: 585 mm - Motor power: 3.75 kW (kneading spiral & boiler drive) - RPM at 50Hz (1st / 2nd gear): 135 / 270 - Connection values: 400V - 3Ph - 50Hz - 16A-CEE plug - Dimensions in cm: 63 x 101 x 122 (W x D x H) - Height with flour dust hood open: 160 cm - Height of the top edge of the boiler: 79 cm - Net weight: 320 kg

Condition: used, Welding turntable ESS type DT 50 Kdjdpfsrwq Urjx Afvjl No. 86 / 1125 Year of construction 1986 max. load 50 kg Face plate diameter 300 mm Face plate speed 0.19 to 5.7 rpm Control voltage 24 Volt Motor power 100 watts Mains connection 220 Volt, 50 Hz. - Faceplate can be swiveled continuously through 180° in position - Speed control via rotary potentiometer - Clockwise/anticlockwise rotation - Foot switch - 2-stroke and 4-stroke operation - Sliding contact for ground up to 200 Amp. - New ESS PS3 control system from 2009 Space requirement L x W x H 600 x 500 x 350 mm Weight 45 kg very good condition

Condition: used, Year of construction: 2017, operating hours: 5,762 h, 2017 | Yanmar VIO 50-6A with 3 excavator buckets | Used Mini Excavator < 7t | 5762 hours 📍Location: Germany 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 19900 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 61 inspection points 57 approved ✅ 4 imperfect ℹ️ 0 issues ⚠️ 📌 Inspector's Comment: As for cosmetic condition: looks heavily used. As for functionality: everything seems to be working 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "39837 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Kdodpfeyzhxkjx Afvol 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, Year of construction: 2025, fuel type: diesel, motor manufacturer: Caterpillar C3.3, General information Field of application: Construction Weights Empty weight: 889 kg Functional Generator capacity: 50 kVA Dimensions of cargo space: 230 x 96 x 140 cm CE mark: yes Other information Fuel consumption: 8.7 Liter per Hour at 75% Load Generator: Caterpillar SR500 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Water tank volume: 103 l Additional information Please contact Team DPX for more information Kdjdpfx Aoy R I Htjfvjl = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank = Remarks = The images shown, including components such as the control panel, circuit breaker, coolant heater etc. may differ from the actual units that are available for sale. This is due to the availability of various enclosures, components and frames.

Condition: used, Year of construction: 1990, operating hours: 83,000 h, functionality: fully functional, Complete precision stamping line ready for relocation. Centre piece is a BRUDERER BSTA 50HL (500 kN, year 1990, Kom. 9443) equipped with control and Unidor tool and press safety monitoring system. The line includes a sound-insulating safety cabin, finished-parts output conveyor, Soprem H1000/1000ZV/10M/LK.LF/N1/G coiling machine (2003), and Soprem BR19/160/12/U Straightening machine (2003). Available as a complete turnkey lot. Technical Specifications Press Manufacturer BRUDERER AG, Frasnacht, Switzerland Machine Model: BSTA 50 HL Serial / Commission No.: Kom. 9443 Year of Manufacture: 1990 Operating Hours: 82,600.0 h (as shown on press control) Total Weight approx.: 8,700 kg Sound Enclosure / Cabin Included: W 3,460 × L 2,331 × H 3,910 mm Stroke range (adjustable): 16 / 19 / 25 / 32 / 38 / 44 / 51 mm Ram adjustment range: 64 mm Kdedsy S E U Rjpfx Afvol Tool opening width (max.): 950 mm Bolster plate — Width × Depth: 930 × 650 mm Baseplate opening W × D: 900 × 200 mm Strip feed height (adjustable): 60 – 140 mm Max. strip pass-through width: 250 mm Feeding device: BBV 195 - 85 Feeding angle: 90 degrees Max. Strip thickness: 4 mm Max. Strip width: 160 mm Feed length: 0 – 85 mm Supply voltage: 3 × 400 V / 50 Hz Main motor power: 28 kW Control voltage (DC): 24 V DC Pneumatic supply: 6 – 10 bar (R ½" connection) Press width (with feeder) approx. 2,471 mm Press depth approx. 1,302 mm Press height approx. 3,165 mm Including Soprem H1000/1000ZV/10M/LK.LF/N1/G coiling machine (2003) Including Soprem BR19/160/12/U Straightening machine (2003) Includign Unidor press and Tool Safety System Finished-parts output conveyor belt Sound-insulating safety cabin / enclosure Original technical documentation and schematics

Condition: used, Year of construction: 2001, Overview This Kisters Maschinenbau Wrap Around Packer 420/50, manufactured in 2001, is designed for high-speed secondary packaging of PET one-way bottles in beverage production lines. The machine was previously used for packaging PET bottles and achieves a rated output of up to 50,000 bottles per hour. The machine was taken out of operation because the one-way PET line and the can line now share a common packaging section. With 16,976 operating hours, the machine shows relatively moderate operating time for an industrial high-speed packaging machine of this age. Based on the listed formats, the machine is suitable for a wide range of multipack and carton packaging applications. It can process tray packs, wrap-around packs, cluster tray packs, and full carton / fully enclosed carton formats. The format range covers several bottle sizes including 0.33 l, 0.355 l, and 0.5 l, with pack configurations such as 2x12, 4x6, 3x8, 3x4, 4x5, and 6x4. This makes the machine a flexible packaging solution for breweries, soft drink producers, and beverage companies handling PET one-way bottle formats in medium to high-capacity production environments. Technical Data Manufacturer: Kisters Maschinenbau GmbH Model: Wrap Around Packer 420/50 Machine Type: Wrap-around packer / secondary packaging machine Year of Manufacture: 2001 Capacity: up to approx. 50,000 bottles/hour Operating Hours: 16,976 h Application: Packaging of PET one-way bottles Previous Use: PET one-way beverage line Current Status: Taken out of operation due to line reconfiguration Bottle Formats: 0.33 l, 0.355 l, 0.5 l Packaging Types Covered: Tray packs Wrap-around packs Loose wrap-around packs 90° tray packs Cluster tray packs Full carton / fully enclosed carton packs Export tray formats Pack Configurations: 2x12 4x6 3x8 3x4 4x5 6x4 inkl. shrink application for trays  Listed Formats: 0.33 l LNB 2x12 tray 0.355 l LN 2x12 tray 0.33 l LNB 4x6 tray 0.355 l KN 4x6 tray 0.33 l LNB 3x8 tray 0.355 l LN 3x8 tray 0.5 l LN 4x6 tray 0.5 l LN 6x4 tray 0.5 l LN 4x6 KLW full carton 0.33 l LN 4x6 loose wrap-around 0.33 l LNB 4x6 90° tray 0.355 l LN 4x6 90° tray 0.33 l BA 4x6 loose wrap-around 0.33 l BA 3x4 loose wrap-around 0.33 l Miller 4x6 loose wrap-around 0.33 l Salitos 4x6 loose wrap-around 0.33 l Vichy 4x6 tray cluster 0.33 l LN 4x6 tray cluster 0.33 l LN LCE 4x6 full carton 0.33 l EW 4x6 export full carton 0.33 l EW 4x6 export tray 0.5 l EW 4x5 loose wrap-around Kdedpfx Afsy Sidvjvol

Condition: excellent (used), Year of construction: 2021, operating hours: 632 h, lifting height: 4,800 mm, fuel type: electric, mast type: triplex, total height: 2,460 mm, total length: 5,500 mm, total width: 1,550 mm, color: other, Year of manufacture: 2021 Empty weight: 8.080 kg Lifting capacity: 5.000 kg CE mark: yes Technical condition: very good Visual appearance: very good = Additional options and accessories = - 3rd hydr. circuit - 4th Hydr. circuit Kdodjy R Rr Ejpfx Afvol - Beacon(s) - Freelift - LED-lighting - Non marking tires - Side shift - Work lamp(s) = Remarks = General Country of production: China Condition CE type: CE Fork positioner and side shift, lithium battery with charger, closed cabin

Condition: reconditioned (used), Year of construction: 2005, operating hours: 30,408 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,100 mm, bale width: 1,100 mm, bale height: 720 mm, bale weight: 550 kg, overall weight: 16,000 kg, oil tank capacity: 600 l, power: 22 kW (29.91 HP), year of last overhaul: 2025, volume flow: 530 m³/h, Technical data baler: Manufacturer Presona AB Type LP 50 EH1 Year of construction 2005 Operating hours 30,408 hours, as of April Number of pressed bales 198,059 as of April Pressing force main press 50 tonnes Kodpfx Asy R Npiofvjdl Specific pressing force 63 N/cm² Theoretical throughput capacity 530 m³/hour Throughput capacity under operating conditions 260 m³/hour Dimensions of feed chute 1,250 x 1,100 mm Bale chamber volume 2.2 m³ Bale dimensions 1,100 x 720 mm, variable length Drive power 22 kW Tying 5-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm 6 up to 7 tonnes/hour Bulk weight of 50 kg/cbm 7 up to 9 tonnes/hour Bulk weight of 100 kg/cbm 11 up to 14 tonnes/hour Bale density (paper/newspapers) 400 to 550 kg/m³ Hydraulic oil tank capacity 600 litres PLC control Telemecanique TSX Micro Schneider Magelis control panel Effective transport dimensions excl. baler 8,125 x 2,300 x 3,000 mm (L x W x H) Transport weight press approx. 16 tonnes Condition of the baler: The machine was partial overhauled in our workshop and general maintenance work was carried out. After completion of the overhaul work, the press was tested during operation and is available for sale at short notice. The following overhaul work was carried out: General work: Machine cleaned, derusted, primed, partially painted Wire entry marks in the press channel feed-throughs welded shut and smoothed Hydraulic unit: Hydraulic oil tank emptied, tank cleaned, new oil filled Oil filter and air filter replaced Leaky oil sight glass on hydraulic oil tank replaced All hydraulic hoses replaced Electrics: English language installed in the programme menu Two key switches in the control panel replaced Control cabinet replaced Signal lamp on the control cabinet replaced Flaps end switch replaced Electrical system of the whirling unit replaced, connected and tested Press ram: All four rollers removed from the press ram and replaced Main hydraulic cylinder dismantled, disassembled and partially overhauled, cylinder tube honed, complete seal set replaced, leak test performed All plastic wear pads on the press ram replaced Pre-press: Both bearings on the pre-press shaft replaced. Both hydraulic cylinders dismantled, disassembled and partially overhauled, both cylinder tubes honed, complete seal sets replaced, leak test performed. Scraper flap on the pre-press replaced. Binding system: Two complete needles with wire deflection rollers replaced Needles adjusted and set All wire deflection rollers in the needle heads replaced Drill fingers replaced Two drill shafts replaced All 8 wear plates on the Drillomat, under the drill fingers, replaced Scope of delivery: Only the baler will be sold. The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Kedpoy R Npcjfx Afvodl Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2012, operating hours: 4,000 h, Equipment: all wheel drive, Mini excavator New Holland E 50 B SR. * Operating weight: 4,945 kg Kdsdpfx Afeup R Uusvsl * Air conditioning * Year of manufacture: 2012 * Hours: 4,000 * Machine is in very good condition * Immediately ready for use

Condition: like new (used), Year of construction: 1986, functionality: fully functional, Equipment: documentation/manual, safety light barrier, MECOS PRESS BRAKE 2000 X 50 TON Kdsdpfsy Tpaaex Afvsl MODEL MEDA 50 POSITIONED ON 2 AXES MOTORIZED BACK GAUGE USED MACHINE INTERNAL CODE: SVR 424

Condition: used, Year of construction: 2014, Used machine Year of manufacture: 2014 Features and technical data: - Working area X: 3,740 mm - Working area Y: 1,570 mm - Working area Z: 350 mm - 4th axis: available - 5th axis: 5-axis spindle, 12 kW motor - with additional C-axis locking - Tool changer positions: 24 with rotary magazine; 10 in the left side of the machine stand - Vertical drilling spindles: 12 Kdsdpfxsx Hllxo Afvsl - Machine table: console table - Table positioning automation: available - 6 workpiece supports, type e-motion - Special workpiece clamping system for frames - Software: FORMAT 4 WOOD FLASH, TPA ALBATROS - 2 machining areas for pendulum operation - with automatic central lubrication - with mobile control panel with PC monitor - with air conditioning for control cabinet - with vacuum pump 90 m³/h - with hand-held control device - Included: 12 frame clamps, 8 large and 4 medium suction cups Availability: short-term Location: Röllbach

Condition: used, Year of construction: 2023, operating hours: 885 h, lifting height: 3,700 mm, fuel type: diesel, power: 55 kW (74.78 HP), Empty weight: 8.056 kg Lifting capacity: 5.000 kg Rental currency: EUR Kdsdpfx Aex I U I Sjfvel Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2021, operating hours: 1,940 h, fuel type: diesel, power: 55 kW (74.78 HP), Empty weight: 8.056 kg Lifting capacity: 5.000 kg Rental currency: EUR Please contact KEY-TEC Sales for more information Kedpexdhf Hsfx Afvjdl

Condition: used, power: 36 kW (48.95 HP), fuel type: diesel, Year of construction: 2023, operating hours: 815 h, Drive: Wheel Empty weight: 2.685 kg Kdodpeyqmixofx Afvjl Chassis type: articulated Lifting capacity: 1.839 kg Top speed: 30 km/h Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 17,058 h, load capacity: 5,000 kg, lifting height: 6,500 mm, free lift: 2,070 mm, load center: 700 mm, fuel type: electric, mast type: triplex, construction height: 3,060 mm, battery model: PzS, battery capacity: 930 Ah, remaining battery capacity: 50 %, battery voltage: 80 V, fork length: 1,400 mm, front tire type: cushion tires (black), rear tire type: cushion tires (black), Equipment: centralized greasing system, lighting, - Comfort cabin, 800 mm wide, tinted windows, front and rear windscreen wipers, sliding window on the right, joystick with integrated direction selector on the armrest, air-suspended comfort seat, interior lighting. - LED headlights front and rear, additional work lights on the cab roof and the lifting frame. Kjdpey Sabljfx Afvjdl - Additional equipment: secondary battery (powerpacks), central lubrication system, roof wiper, hydraulic fork adjustment, electric heating with cab ventilation, beacon on cab roof, reversing camera.

Condition: used, functionality: fully functional, machine/vehicle number: 516329B00051, Year of construction: 2011, operating hours: 5,347 h, load capacity: 5,000 kg, lifting height: 4,670 mm, free lift: 1,470 mm, fuel type: electric, mast type: triplex, construction height: 2,330 mm, fork carriage width: 1,300 mm, fork length: 1,600 mm, empty load weight: 9,080 kg, total length: 2,700 mm, drive type: Elektro, construction width: 1,400 mm, Electric 4-wheel forklift Chassis number: 516329B00051 Kdsdpfx Aey Scrtofvol Load center: 500 Fork width: 130 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Triplex Condition: Ready for operation and fully functional Technical condition: Good Front tire type: Superelastic Front tire size: 28x12.5-15 Front tire condition: 80 - 100% Rear tire type: Superelastic Rear tire size: 21x8-9 Rear tire condition: 40 - 60% Battery voltage: 80V Battery year of manufacture: 2011 Battery condition: 40 - 60% Side shifter, 3rd valve, 4th valve, working lights at the front, half-cab, windshield wiper,

Condition: used, mileage: 279,000 km, power: 235 kW (319.51 HP), first registration: 12/2021, fuel type: diesel, number of seats: 50, gearing type: automatic, emission class: euro6, color: white, brakes: retarder, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, * SCANIA CITYWIDE articulated bus with 50 seats - Air conditioning - ZF EcoLife automatic transmission - Matrix display system - * Diesel - 9,291 cc - 235 kW - 320 hp - Euro 6 - Green emissions sticker - New TÜV inspection - from first owner - * 50 seats + 1 driver + 1 wheelchair space with manual wheelchair ramp - 100 standing places * Auxiliary heater / Radio / ABS / ASR - 3 double-width doors - LAWO LED matrix system - * Vehicle features Ventura doors - 5 vehicles available gradually - * Vehicle dimensions: Length: 17,997 mm x Width: 2,550 mm x Height: 3,025 mm * German vehicles - German vehicle registration documents - Price is per vehicle - * Errors / misprints & prior sale reserved - available immediately - Kdjdpox Ayfcofx Afvol * For viewing & test drive, please arrange an appointment * Contact: Andreas Vogel * ATTENTION - Vehicles are stored off-site - Please specifically inquire about the location - ATTENTION -

Condition: used, Year of construction: 2016, operating hours: 19,808 h, Equipment: all wheel drive, Volvo L 110H wheel loader FIN: Vehicle ID / Vehicle ID / 0204825 ????? ????? ??? ????? ????? ????? * Own weight 20,700 t * Tires 23.5 R25 * Articulated steering * Transport length 6.48 m * Transport width 2.67 m * Transport height 3.38 m * Driving speed 40 km/h * Dumping height max. 4.03 m * Outside turning radius 12.89 m * Lifting capacity 150.6 kN * Bucket scale * Air conditioning * Rear view camera * Sliding window * Trailer coupling * Heated seat * Heated exterior mirrors * Air conditioning * Volvo D8J diesel engine with 191 kW * Pfreundt WK 50-XS scale Other: * German vehicle * Service history (invoices) available New general inspections / safety tests or weight reductions / increases are possible on request. We are happy to help you obtain export/transfer license plates, and we can also transfer your purchased vehicles within Germany. Contact us!---- We speak the following languages: German, English and Russian!---- No liability for printing and spelling errors, changes, prior sale and errors reserved!----Who are we? Leible commercial vehicles is a family business based in Kehl am Rhein. Thanks to our many years of experience in the areas of reconditioning and sales of commercial vehicles, we are a reliable partner for customers worldwide. The particular strength of Leible commercial vehicles lies in the sale of new and used commercial vehicles. A wide range of vehicles can be found on 11,000 square meters. Our corporate philosophy is characterized by fairness and seriousness. Since customer satisfaction is very important to us, we offer our customers an excellent all-round service package and provide them with a competent contact person who will support them in the purchase or sale of vehicles. See for yourself! Our service for you: Loading vehicles We are happy to help you load the vehicles you have purchased. Organizing special transports We are happy to help you organize special transports. Day numbers / export license plates We are happy to help you obtain export license plates / short-term license plates. Kedpfovywg Asx Afvodl Completing customs formalities We are happy to help you complete customs matters.

Condition: good (used), Year of construction: 2018, operating hours: 4,548 h, load capacity: 5,000 kg, lifting height: 4,080 mm, fuel type: electric, mast type: duplex, construction height: 2,850 mm, empty load weight: 7,500 kg, mileage: 4,548 km, Electric duplex forklift Brand: Still (Germany) Year of manufacture: 2018 Capacity: 5,000 kg Lifting height: 4,080 mm Overall height: 2,850 mm Equipped with sideshift Equipped with fork spreader 4,548 operating hours Fork length: 2,200 mm Battery from 2018 with external charger Kedpfoy R Akmsx Afvedl

Condition: good (used), Year of construction: 2020, operating hours: 6,839 h, load capacity: 5,000 kg, lifting height: 6,280 mm, fuel type: electric, mast type: triplex, construction height: 3,000 mm, empty load weight: 8,000 kg, mileage: 6,839 km, Electric triplex forklift Brand: Still (Germany) Year of manufacture: 2020 Capacity: 5,000 kg Lifting height of 6,280 mm Passage height 3,000 mm Equipped with: FREELIFT, SIDESHIFT, and FORK SPREADER 6,839 operating hours Battery Automatic filling system with external charger Watch the video on YouTube Kodpfxoy R Adme Afvedl

Condition: ready for operation (used), * Brand: dbr Fördertechnik * Surface: 5000 x 2000 mm – 1 deck. * Driving: E-motor 15 kW Kdjdpfxsy R Rvwj Afvol * Incl.: springs and springsupport. * Stock: 1 piece.

Condition: good (used), functionality: fully functional, total length: 590 mm, total width: 590 mm, total height: 1,550 mm, input voltage: 400 V, input frequency: 50 Hz, DGUV certified until: 06/2027, type of input current: three-phase, Chocolate Tempering Machine Dedy 50 Dedy Tempering Automaton Model: 50 kg Thermometer Kdedpfx Afjy Srvzjvel Discharge valve heating Electric temperature control Connection: 400V, 2400 Watt, 16A-CEE plug Dimensions approx.: 590 x 590 x 1550 mm (W x D x H) Used equipment

Condition: used, Year of construction: 2012, operating hours: 5,812 h, functionality: fully functional, Baler Presto HPK 50 HS, year of manufacture 2012, with perforator and incline conveyor (sliding belt conveyor) Manufacturer: Presto Model: HPK 50 HS Year of manufacture: 2012 Operating hours: 5,812 Drive power: 30 kW Press force: 50 t Feed opening: 1,600 x 650 mm (L x W) Chamber cross-section: 700 x 950 mm Max. filling volume: 1.06 m³ Cycle time: 19 s Tying: 4-fold Throughput rate at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8,420 x 1,900 x 2,400 mm (L x W x H) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power: 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1,380 x 1,200 mm Incline conveyor Kjdpfxsy R Tp Te Afvjdl Length: 7,931 mm Belt width: 1,400 mm Total width: 2,026 mm Incline: 29° Speed: 0.6 m/s Materials: Paper, cardboard, film, PET bottles Please note: All technical specifications are based on manufacturer information. We do not accept liability for the accuracy of these specifications or for potential errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections by prior arrangement are possible. Sale is ex-works, subject to prepayment, with no warranty or guarantee.

Condition: good (used), Beading machine, flanging machine, seam closing machine, motorized beading machine Kodpfxob A Ncrj Afvjdl -Max. sheet metal capacity: 1.25 mm -electrically driven: 1.1 kW -Protrusion: 50 mm -Dimensions: 900/800/H1100 mm -Weight: 250 kg