Used Inverter for sale (1,750)

Condition: used, Year of construction: 1990, Overview This is a complete automatic KEG line for stainless-steel kegs, built in 1990 by Leifeld & Lemke and continuously extended and modernised over its service life. It covers the full cycle from empty-keg infeed and centring through external washing, internal cleaning, filling and full-keg checking to automatic palletising. According to the seller it runs at up to 130 kegs/h in the 30 L format in three-shift duty. Control is by Siemens SIMATIC PLCs of mixed generation (see Condition). Technical data - Manufacturer (line builder): Leifeld & Lemke - Year of manufacture: 1990 (continuously upgraded since) - Machine type: complete automatic KEG cleaning and filling line - Capacity: up to 130 kegs/h at 30 L (seller-stated) - Keg formats: 20 L, 30 L, 50 L, basket fitting (Korbfitting); no slim kegs Godpfx Aozk U Hkshzsiw - Control: Siemens SIMATIC S5 and S7-300 (mixed generations) Scope of Delivery - Empty-keg infeed with centring column | Leifeld & Lemke | Detects intermediate layers, centres kegs for the robot | 1990 - Keg handling robot | KUKA | Loads empty kegs onto the conveyor, unloads full kegs onto pallets | approx. 2015 - Fitting tightener | Leifeld & Lemke | Re-torques loose keg fittings | 1990 - Keg inverter | Leifeld & Lemke | Inverts kegs for internal rinsing | 1990 - External keg washer | Leifeld & Lemke | Steam-heated, 2 zones (brushing and high pressure) | 1990 - Internal cleaning | Leifeld & Lemke | Caustic pre-clean (approx. 10 min dwell, for wheat beer) and main cleaner | 1990 - CIP plant | Leifeld & Lemke | 5 tanks with chemical dosing, steam-heated (seller-stated) | 1990 - Keg filling block | KHS Till | 1990 - Full-keg check-weigher | Leifeld & Lemke | With keg blow-off | 1990 - Cap placer | Leifeld & Lemke | Seats plastic caps onto the fitting | 1990 - Palletiser | Albert Frey | Served by the KUKA robot | 1990 - Electrical documentation | Circuit diagrams available as physical copies Not included: handle control, Vision Tec inspection system, labeller. No operating manual is available. Condition Used - still installed and under power, in active three-shift production and reported by the seller to be well maintained. The 1990 line has been progressively modernised: kegs were originally hand-loaded, the robot was later replaced (approx. 2015, seller-stated) and Siemens SIMATIC touch HMIs added. Control mixes Siemens SIMATIC S5 (reportedly filler, CIP and pre-/main cleaning) and S7-300 (the remaining stations, conveyors and washer); as the S5 generation is long discontinued, spare-part supply and future control integration should be planned accordingly. Availability In production until approximately April 2027; the existing and the successor line will then run in parallel, so realistic handover is from around Q2 2027. Location: Germany. Viewings in operation are possible at any time. Dismantling and removal can be arranged on request. Price on request.

Condition: good (used), mileage: 834,435 km, power: 353 kW (479.95 HP), first registration: 01/2021, fuel type: diesel, tire size: 385/55 R22,5, axle configuration: 6x2, fuel: diesel, color: green, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro6, suspension: steel-air, total length: 6,490 mm, total width: 2,550 mm, total height: 3,990 mm, permissible axle load (axle 1): 8,000 kg, permissible axle load (axle 2): 7,500 kg, permissible axle load (axle 3): 11,500 kg, Year of construction: 2021, Equipment: central locking, cruise control, electric window regulation, fridge, navigation system, power mirror, second fuel tank, = Additional Options and Accessories = - 2 beds - Aluminum fuel tank - Remote central locking - Speed limiter - Alloy wheels - Lifting axle - Air horn - Sleeper cabin - Sun visor - Converter = Notes = The heating control does not work! Crack in the windshield Gedpfxozk I S To Ahzoiw Special interior features Inverter New tachograph Refrigerator Leather interior Alloy wheels Navigation system Lift platform Remote spotlights = Further Information = General Information Number of doors: 2 Model year: 2026 License plate: 45-BRB-8 Technical Information Number of cylinders: 6 Engine displacement: 11,120 cc Axle Configuration Axle brand: Other Brakes: Disc brakes Front axle: Tire size: 385/55 R22.5; Max. axle load: 8000 kg; Steered; Tire tread depth left: 45%; Tire tread depth right: 45%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 385/55 R22.5; Lifting axle; Max. axle load: 7500 kg; Steered; Tire tread depth left: 35%; Tire tread depth right: 35%; Suspension: Air suspension Rear axle 2: Tire size: 315/70 R22.5; Dual tires; Max. axle load: 11,500 kg; Tire tread depth left (inside): 45%; Tire tread depth left (outside): 45%; Tire tread depth right (inside): 45%; Tire tread depth right (outside): 45%; Suspension: Air suspension Weights Unladen weight: 7,489 kg Payload: 18,511 kg GVW: 26,000 kg Interior Interior: gray, leather Number of seats: 2 Maintenance, History, and Condition Number of owners: 1 APK (Technical Inspection): valid until 02/2027 Product Safety Manufacturer: Nijwa Used Trucks Vormerij 12 7621HL BORNE, NL

Condition: used, mileage: 125,000 km, power: 100 kW (135.96 HP), first registration: 06/2005, fuel type: diesel, overall weight: 5,990 kg, color: white, gearing type: mechanical, emission class: euro3, number of seats: 4, Equipment: ABS, air conditioning, parking heater, Internal vehicle no.: 6867 ----Why autonext? Over 400 cars and commercial vehicles immediately available. One of the largest vehicle exhibitions in the region. Over 1,000 satisfied customers annually - top customer ratings. Attractive financing and trade-in options available. Complete vehicle range on autonext? Mobility made easy. WhatsApp Chat: ### Offer: Financing from 4.99% ### ----Good and well-maintained condition 1st owner, German vehicle, non-smoking vehicle Complete service history, exclusively serviced at Mercedes Benz Permissible total weight: 5,990 kg Twin tires Manufacturer: Vehicle construction specialist company "MAKOBEN" Manufacturer: IBAK Gjdpfxezk Sz Ss Ahzsiw Type: Lifting device 004 Max. load 1500N Monitors Printer Roof air conditioning "Dometic" 2x inverters "Victory energy" Electric step Rear view camera Auxiliary heater 230V exterior socket 230V sockets (in the cargo area) Cargo area lighting Tachograph Fire extinguisher Upon request, we offer a trailer coupling retrofit for only 599 euros, and if possible, an increase in the trailer load to up to 3.5t. ---- Special equipment: * Trailer socket 13-pin * Exterior mirror, electrically adjustable, left * Exterior mirror, electrically adjustable, right * Fire extinguisher * Fog lights * Rotating beacon left/right * Rear cross member reinforced * Seats in the cab: Driver's seat with hydraulic suspension * Stabilizer bar, rear axle reinforced * Stabilizer bar, front axle reinforced Standard equipment: Hydraulic power steering, power steering, emission standard Euro 3, axle load front axle 2.3 t, airbag driver's side, Anti-lock Braking System (ABS), drive type: rear-wheel drive, exterior mirror heated, battery 74 Ah, cab: basic, suspension: leaf spring / leaf spring, noise control EG 92 / 97, transmission 5-speed, body/superstructure: high-roof box van, body variant: high roof, fuel tank: 70 L, cargo area partition high without window, engine 4.3 L - 100 kW diesel (OM 904 LA), rear fog light, radio preparation, wheelbase 4250 mm, reversing light, disc brake rear axle, disc brake front axle, sliding door cargo area right, side impact protection, seats in the cab: double passenger seat, bumper in plastic, underrun protection rear fixed, permissible total weight 5.99 t. ----MOT/emission test can be done upon request. ----Warranty & "TÜV Profi Check" are of course available! We will also gladly accept your vehicle in part exchange! We will also create a customized financing or leasing offer for you! Without down payment, redeemable at any time and with special repayment options. Direct your wishes to our sales team; we will be happy to advise you. ----Make an appointment for a test drive and be convinced of the quality of our vehicles. Appointment arrangements: Mon-Fri from 08:30 - 18:00, Sat from 09:30 - 13:30 ----Visit us also on We look forward to your visit! ----Errors and omissions excepted. The equipment offered on the internet is not part of the contract. The equipment must be checked on site.

Condition: used, mileage: 47,971 km, power: 338 kW (459.55 HP), first registration: 07/2024, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x2, wheelbase: 4,900 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 9,530 mm, total width: 2,550 mm, Year of construction: 2024, Equipment: ABS, AdBlue, air conditioning, central locking, cruise control, differential lock, electric window regulation, fridge, lane keeping assist, parking heater, power assisted steering, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Roof spoiler - Power steering - Remote central locking - Air suspension - Tow hitch - PTO - Radio - Disc brakes - Sun visor - Spotlights - Lane keeping assist - Auxiliary heater - Toolbox = Notes = Volvo FH 460 8x2. 490 cm wheelbase. 2 x 10-ton front axle. Dynamic steering. 230V inverter. Tractor-trailer combination. Removable fifth wheel / 3 positions. Coupling height: 125 cm. Loading area (short): 470 cm. Loading area (long): 620 cm. Loading area height: 108 cm. 2 x 40 mm drawbar eye. Twist locks. Side boards. Stainless steel boxes. Chain boxes between the axles. Lashing points. Tie-down eyes in the side rail. Work lights. 24V NATO connector. = Further Information = Technical Information Number of cylinders: 6 GVWR: 39,000 kg Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/55R22.5; Steerable; Tire tread (left): 60%; Tire tread (right): 60% Front axle 2: Tire size: 385/55R22.5; Steerable; Tire tread (left): 60%; Tire tread (right): 60% Rear axle 1: Tire size: 295/60R22.5; Double tires; Tire tread (left, inside): 60%; Tire tread (left, outside): 60%; Tire tread (right, inside): 60%; Tire tread (right, outside): 60% Rear axle 2: Tire size: 355/50R22.5; Steerable; Tire tread (left): 60%; Tire tread (right): 60% Functional Loading area dimensions: 620 x 255 x 108 cm Crane: Palfinger Maintenance MOT (Technical Inspection): valid until 07/2027 Financial Information Price: On request Identification Model number: FH 460 8x2 PALFINGER PK100002 / Gedpfozkux Hex Ahzoiw = Company Information = ALL PRICES ARE NET FOR EXPORT. Joris Versteijnen (NL-DE-GB); Wouter Greutink (NL-DE-GB-ES-IT); Govorim po ryccki. We make every effort to provide correct information, but no rights can be derived from the information provided.

Condition: used, mileage: 47,971 km, power: 338 kW (459.55 HP), first registration: 07/2024, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x2, wheelbase: 4,900 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 9,530 mm, total width: 2,550 mm, loading space length: 6,200 mm, loading space width: 2,550 mm, loading space height: 1,080 mm, Year of construction: 2024, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, power assisted steering, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Roof spoiler - Electric power steering - Remote central locking - Refrigerator - Air suspension - Tow hitch - PTO Gisdpjzktp Dsfx Ahzjw - Radio - Disc brakes - Sun visor - Spotlights - Lane keeping assist - Auxiliary heater - Toolbox = Notes = Volvo FH 460 8x2. 490 cm wheelbase. 2 x 10-ton front axle. Dynamic steering. 230V inverter. Tractor unit with box body combination. Removable fifth wheel / 3 positions. Coupling height: 125 cm. Loading floor short: 470 cm. Loading floor long: 620 cm. Loading floor height 108 cm. 2 x 40 mm kingpin. Twist locks. Side boards. Stainless steel boxes. Chain boxes between the axles. Lashing points. Tie-down eyes in side rails. Work lights. 24V NATO connector. = Further Information = Technical Information Number of cylinders: 6 GVWR: 39,000 kg Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Front axle 2: Tire size: 385/55R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 1: Tire size: 295/60R22.5; Twin tires; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60% Rear axle 2: Tire size: 355/50R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Functional Crane: Palfinger Maintenance MOT (Technical Inspection): valid until 07.2027 Financial Information Price: On request Identification Model number: FH 460 8x2 PALFINGER PK100002 / = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information; however, no rights can be derived from the texts provided.

Condition: used, mileage: 47,971 km, power: 338 kW (459.55 HP), first registration: 07/2024, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x2, wheelbase: 4,900 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, total length: 9,530 mm, total width: 2,550 mm, loading space length: 6,200 mm, loading space width: 2,550 mm, loading space height: 1,080 mm, Year of construction: 2024, Equipment: ABS, AdBlue, air conditioning, central locking, crane, cruise control, differential lock, electric window regulation, lane keeping assist, parking heater, power assisted steering, spoiler, traction control, trailer coupling, = Additional Options and Accessories = - Roof spoiler - Electric power steering - Remote central locking - Refrigerator - Air suspension - Tow hitch - PTO - Radio - Disc brakes - Sun visor - Spotlights - Lane keeping assist - Auxiliary heater - Toolbox = Notes = Volvo FH 460 8x2. 490 cm wheelbase. 2 x 10-ton front axle. Dynamic steering. Gijdpfxjzkr Raj Ahzew 230V inverter. Tractor unit with box body combination. Removable fifth wheel / 3 positions. Coupling height: 125 cm. Loading floor short: 470 cm. Loading floor long: 620 cm. Loading floor height 108 cm. 2 x 40 mm kingpin. Twist locks. Side boards. Stainless steel boxes. Chain boxes between the axles. Lashing points. Tie-down eyes in side rails. Work lights. 24V NATO connector. = Further Information = Technical Information Number of cylinders: 6 GVWR: 39,000 kg Axle Configuration Brakes: Disc brakes Suspension: Air suspension Front axle 1: Tire size: 385/55R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Front axle 2: Tire size: 385/55R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Rear axle 1: Tire size: 295/60R22.5; Twin tires; Tire tread depth left inner: 60%; Tire tread depth left outer: 60%; Tire tread depth right inner: 60%; Tire tread depth right outer: 60% Rear axle 2: Tire size: 355/50R22.5; Steered; Tire tread depth left: 60%; Tire tread depth right: 60% Functional Crane: Palfinger Maintenance MOT (Technical Inspection): valid until 07.2027 Financial Information Price: On request Identification Model number: FH 460 8x2 PALFINGER PK100002 / = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB) Wouter Greutink (NL-DE-GB-ES-IT) Govorim po ryccki. We make every effort to provide accurate information; however, no rights can be derived from the texts provided.

Condition: good (used), Frequency converter, frequency transformer, drive converter, controller, variable speed drive Giodpfx Ahezk D Ttezew -Manufacturer: SEW Eurodrive, Movitrac drive inverter -Type: Movitrac 31C014-503-4-00 -Item No.: 8263744 -Power: 2.8 kVA -Input: 380-500 V 50/60 Hz -Output: 0-400 Hz -Dimensions: 185/105/H190 mm -Weight: 1.9 kg

Condition: as good as new (ex-display), Year of construction: 2025, For wood chips and wood dust. Designed for commercial use. All clean air extraction systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. High extraction performance with a small footprint. Maximum performance in this class. Very quiet. Application area: Clean air extraction systems for wood chips and wood dust. Designed for commercial use. For all woodworking machines with a corresponding extraction port diameter. Can also be used for multiple dust sources. High-quality, well-designed construction. Robust and compact housing made of galvanized sheet steel. Extraction port can be easily repositioned from left to right, allowing for flexible use. Large inspection openings. Large, mobile chip containers with clamping bracket and chip collection bag. The system is fully assembled upon delivery, allowing for quick deployment. Mobile. Filter description: Ultra-compact with maximum filter area. Filter material made of polyester fleece, aluminum-coated, washable, and therefore with a long service life. Filter is standard and tested and approved in antistatic design according to category M-BIA. Filter resistance monitoring via differential pressure sensor, adjustable with a warning light on the control panel. Gjdpscnw U Djfx Ahzeiw The fan is located downstream of the filter. Equipment details: With a new locking device for secure container positioning. All systems in this series are dust-tested according to H3, with a residual dust content of less than 0.1 mg/m³. Scope of supply: Metal fan impeller. Inspection opening for cleaning the bypass filter. Connection cable 5 m with CEE plug 5-pole and phase inverter. 2 swivel castors and 2 fixed castors with parking brake. Preparation for connection of machine detection for up to 8 machines and slide valve controls. Manual cleaning. Sound pressure attenuator available as an accessory. Model: RLA 125 M Article no.: 5131256 Technical data Extraction port diameter: 125 mm Motor power: 2.2 kW Mains voltage: 400 V Mains frequency: 50 Hz Nominal volume flow: 1095 m³/h Max. volume flow: Vacuum at Vnenn: Filter area: 5.31 m² Filter material: Dust class M Residual dust content: 0.1 mg/m³ Chip collection volume: 1 x 239 l Max. sound pressure level: 73 dB(A) Dimensions (L x W x H): 1100 x 830 x 1650 mm Height from the lower edge of the extraction port to the ground: 850 mm Weight: 194 kg Location: Arriving at warehouse 54634 Bitburg.

Condition: new, Year of construction: 2026, Enclosed and secure sawing area for increased safety through a legally required saw guard. Anti-rotation mechanism for the wood thanks to stamped-in barbs on the saw frame. Sturdy, torsion-resistant steel frame. Transport device for easy movement. Impact-resistant, scratch-resistant, and weather-resistant thanks to high-quality powder coating. Phase inverter. Dimensions and weights Working height: 700 mm Saw frame support: 740 mm Length approx.: 1030 mm Width/Depth approx.: 770 mm Height approx.: 1095 mm Weight approx.: 92.5 kg Gisdohkz Hispfx Ahzsw Drive Drive type: Electric motor with direct drive Electrical data Power consumption: 5 kW Connection voltage: 400 V Mains frequency: 50 Hz Saw blade Diameter: 700 mm Cutting capacity Saw frame, round timber: 250 mm Location: In stock at 54634 Bitburg - immediately available - Subject to prior sale.

Year of construction: 2025, condition: new, Vacuum lifter BARBARIC, swiveling, including column-mounted slewing crane Equipment package consisting of: - Vacuum lifter uniWood B3-90° - 250 Comfort version, with integrated chain hoist reinforced, lifting capacity: 250 kg Suitable for vertical and horizontal transport of flat, commercially available panels. Gjdpfxjc Umfts Ahzeiw Vacuum generation is achieved pneumatically via an ejector. For lifting porous materials (MDF with a thickness of more than 8 mm), a reinforced vacuum pump is installed. -- Technical data -- Lifting speed of chain hoist: 0-10 m/min infinitely variable via frequency inverter Lifting height (operating range): 2.0 m Chain length: approx. 3.5 m Operating voltage: 230 V / 50 Hz Operating pressure: 7 bar filtered compressed air required Weight: approx. 85 kg -- Safety system -- The lifter is equipped with a vacuum pressure gauge. Releasing the load using a 2-button function. - Column-mounted slewing crane BARBARIC Load capacity 250 kg on the lifting device Consisting of: Column, console and low-friction jib. Delivery including sliding carriage and power supply. Overall height: approx. 4.2 m Lower edge of jib: approx. 3.5 m Outreach: 5 m Slewing range approx. 250° Manual slewing and trolley movement Base plate with 700 x 700 mm and fastening material. Delivery with adhesive anchor for concrete floor. A suitably reinforced concrete floor is required for this fastening. The static verification of the floor must be carried out on site and documented accordingly. Other versions and lengths available upon request.

Condition: new, Year of construction: 2025, Schneider compressor UNM 510-10-90 D A714000 Mobile piston compressor with horizontal tank Standard equipment includes all safety fittings and an electrical connection cable with plug and Condor pressure switch Compressed air tank equipped with a safety valve, tank pressure gauge, and condensate drain valve Gisdpfx Asbyhvrjhzow The welded-on rear handle improves loading and transport capabilities Fully automatic operation via a pressure switch with start-up relief, motor protection, and on/off switch Featuring enhanced equipment for universal use With V-belt drive, 2 cylinders in an in-line arrangement for particularly smooth operation, and a 400 V three-phase motor with external motor protection Low compressor speed – this protects the compressor components, reduces noise levels, and minimizes vibrations Large fan impeller for optimal cooling Including filter pressure regulator for regulated compressed air that is free of condensate, dirt, and oil With a 2 m device connection cable with rubber sheathing and an air outlet via a quick-release coupling Device connection cable with phase inverter 10-year warranty on the tank against rust Technical data Pressure: 10 bar Intake capacity: 510 l/min Delivery capacity: 390 l/min Speed: 1240 min-1 Tank volume: 90 l Weight: 80 kg Noise: 97 dB(A) Dimensions (W x D x H): 1070 x 495 x 895 mm Drive power: 3.0 kW Voltage: 400 V Location: In stock at Bitburg warehouse Subject to prior sale.

Condition: new, Year of construction: 2025, Vertical design for splitting short and long logs Low base plate for easy and strain-free loading of large logs Mechanical log lifting device brings heavy logs into position while protecting the back Equipped with a log catching bracket Quick, tool-free splitting height adjustment Powerful industrial hydraulic system Phase inverter on all 400 V models Two-hand safety circuit Convenient transport with a manual drawbar, thanks to the standard chassis with hard rubber tires and an additional support wheel Impact and scratch-resistant due to high-quality powder coating Space-saving storage due to the easily lowerable cylinder Gisdpfx Ahshkz Hmszow Dimensions and weights Length approx. 1440 mm Width/Depth approx. 1350 mm Height approx. 2280 mm Weight approx. 185 kg Drive Drive type: Electric motor Power consumption: 3.5 kW Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Device data Splitting force max.: 14 t Splitting length min.: 560 mm Splitting length max.: 1040 mm Log diameter min.: 100 mm Log diameter max.: 300 mm Hydraulic system Hydraulic oil tank capacity: 7.5 l Location: In stock at 54634 Bitburg - available immediately - Subject to prior sale.

Condition: new, Year of construction: 2025, Designed for professional structuring and grinding operations Motorized height adjustment of the working units with digital display Units can be switched on individually Highly durable, rubberized conveyor belt Continuously variable feed rate Infeed height remains constant Models str l with continuously adjustable, inverter-controlled brush speed: this enables precise adjustment of the speed to the workpiece material, making it particularly suitable for sensitive materials. Unit for saw-cut appearance available as an option Motorized height adjustment of the units Units can be switched on individually Feed rate continuously adjustable Dimensions and weights Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Extraction nozzle diameter 2 x 150 mm Brushes Diameter 190 mm Length 300 mm Rotation 1500 min⁻¹ Giedpfoff Hdgex Ahzow Electrical data Power of drive motor 2 x 3.0 kW Power of feed motor 0.22 kW Power consumption 6.25 kW Connection voltage 400 V Phase(s) 3 phases Type of current AC Mains frequency 50 Hz Noise emission Sound power level Lw (idle, without extraction) 65 dB(A) Grinding unit Grinding width max. 300 mm Feed unit Feed speed 1 – 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for Gedpoy Ehiwjfx Ahzeiw 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg - immediately available -

Condition: new, Year of construction: 2025, Designed for professional structuring and sanding operations Motorized height adjustment of the working units with digital display Units can be switched on individually Gedpfxoff Hdij Ahzoiw Highly durable, rubberized conveyor belt Infinitely variable feed rate Infeed height remains constant Models str l with infinitely adjustable, inverter-controlled brush speed: this enables precise adjustment of the speed to the workpiece material, making it particularly suitable for sensitive materials. Unit for saw-cut appearance available as an option Dimensions and weights Length approx. 1300 mm Width/Depth approx. 1000 mm Height approx. 1300 mm Weight approx. 440 kg Dust extraction connection Extraction nozzle diameter 2 x 150 mm Brushes Diameter 190 mm Length 300 mm Rotation 1500 min⁻¹ Electrical data Power of drive motor 2 x 3.0 kW Power of feed motor 0.22 kW Power consumption 6.25 kW Connection voltage 400 V Phase(s) 3 Ph Type of current AC Mains frequency 50 Hz Noise emission Sound power level Lw (idle without extraction) 65 dB(A) Sanding unit Sanding width max. 300 mm Feed unit Feed speed 1 – 13 m/min Workpiece Height max. 300 mm Weight max. 100 kg

Condition: new, Year of construction: 2025, Clean Air Dust Extractor: RLA 140 For wood dust and shavings, designed for commercial use Item number: 5131400 Brand: Holzkraft DESCRIPTION Dust-tested according to H3, residual dust content less than 0.1 mg/m³ Suitable for extracting and separating dry wood and plastic shavings High extraction performance with minimal space requirements Maximum performance in this class Very quiet All models with collision protection Area of application Designed for commercial use For all woodworking machines with the appropriate extraction nozzle diameter High-quality, well-thought-out design Robust and compact housing made of galvanized sheet steel Extraction nozzle can be easily converted from left to right, allowing for flexible use Large inspection openings Large, mobile chip container with clamp and chip collection bag Dust extractor already installed upon delivery Fully assembled, allowing for quick deployment. All models are mobile. Model RLA 210: Optimal chip distribution into the chip containers due to the large filter surface. Filter Description Ultra-compact with maximum filter surface. Filter material made of aluminum-coated polyester fleece, thus offering a long service life. Filter tested and approved as standard in antistatic design according to category M-BIA. The fan is installed downstream of the filter. Gsdpfx Aev Sk Tmshzoiw TECHNICAL DATA Dimensions and Weights Length (product) approx. 1241 mm Width/Depth (product) approx. 830 mm Height (product) approx. 1750 mm Net weight approx. 210 kg Chip collection volume 165 l Nominal diameter of the extraction nozzle inlet: 140 mm Axis of the extraction nozzle to the floor: 850 mm Electrical Data Supply voltage: 400 V Mains frequency: 50 Hz Efficiency class of the extraction motor IE3 Drive motor power: 2.2 kW Filter Filter area: 8.5 m² Residual dust content: < 0.1 mg/m³ Manual filter cleaning Noise emission Max. sound pressure level: 71 dB(A) Flow rate Nominal flow rate: 1108 m³/h Max. flow rate: 1750 m³/h SCOPE OF DELIVERY Metal fan impeller Inspection opening for cleaning the bypass filter 5 m connection cable with 5-pin CEE plug and phase inverter Two fixed and two swivel casters with parking brake Manual cleaning

Condition: new, Year of construction: 2025, Clean air dust extractor RLA 160, Holzkraft For wood dust and shavings, designed for commercial use Article number: 5131620 Brand: Holzkraft Chip collection volume: 2 x 165 l Nominal outer diameter of the extraction nozzle inlet: 160 mm Length approx.: 1755 mm Width/depth approx.: 830 mm Height approx.: 1654 mm Weight approx.: 260 kg Gijdpfx Aehkzttehzjw Electrical data Connection voltage: 400 V Mains frequency: 50 Hz Filter Filter area: 9.21 m² Noise emission Sound pressure level max.: 73 dB(A) Volume flow Nominal volume flow: 1448 m³/h Dust class: H3 Scope of delivery: Metal fan impeller Inspection opening for cleaning the bypass filter Connection cable 5 m with CEE plug, 5-pole, and phase inverter Two swivel casters and two fixed casters with parking brake Manual cleaning Art. No. 5131620 Location: Available in stock, 54634 Bitburg - immediately available -

Condition: ready for operation (used), SEW Eurodrive MDX60A0015-5A3-4-00 power module SN: 58216 + MDS60A0015-5A3-4-00 inverter SN:81859, professionally fully overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos. The agreed sales discounts do not apply to this item. Please inquire about the price separately! Gijdpfjx Euhtjx Ahzjw

Condition: ready for operation (used), Rexroth / Indramat DKR04.1-W400E-BE32-01-FW inverter MNR: R911286532, SN:278810-01206, professionally overhauled and fully tested with 12 months warranty, 100% functional, scope of delivery as per photos. ATTENTION: Please enquire separately for packing and shipping costs! Gedpfx Aox Dw Ttehzjiw

Condition: ready for operation (used), SEW Eurodrive MCF40A0040-5A3-4-00 inverter SN: 102121 + MDX60A0040-5A3-4-00 power unit SN: 0173076, professionally fully overhauled and tested with 12 months warranty, 100% functional. Delivery as per the photos. Agreed sales discounts do not apply to this item. Please inquire about the price separately! Giedpex Euhgefx Ahzjw

Condition: ready for operation (used), SEW Eurodrive MOVITRAC 3030-403-4X frequency inverter SN: 19996, used, in good condition, 100% fully functional, delivery as per photos. Gsdpfjx Euikox Ahzjiw

Condition: ready for operation (used), SEW Eurodrive DRS80S4/FT/MM11/LN three-phase motor, serial number: 01.1580695901.0001.11 + MM11D-503-00 inverter, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Gsdei D N N Nepfx Ahzeiw

Condition: ready for operation (used), Bosch SM 20 / 30 GTC - SM 20/30 GTC pulse inverter, serial number as shown in the photo, used, with normal signs of wear, 100% functional, scope of delivery as shown in the photos. Giodpfxoi D Udcs Ahzew

Condition: ready for operation (used), Rexroth HMS02.1N-W0028-A-07-NNNN, part no.: R911309078, IndraDrive M single-axis inverter, serial no. INDRAD 53132, used, minimal signs of wear, 100% functional, scope of delivery as shown in the photos. Gsdpfx Ahoi Ecupszjiw

Condition: new, Jäger SFU 0200/1 frequency inverter, serial number: 31079493, unused, 100% functional, scope of delivery as shown in the photos. Gedei Ebufspfx Ahzsiw