Used Jc Times Extrusion Tool Accessories for sale (55,238)

Year of construction: 1997, condition: used, PILOT EXTRUSION SPINNING LINE POLYESTER MAIN PART WAS DESIGNED BY FOURNE IN 1997 FOR DSM TO MAKE TRIALS OF POLYESTER AND POLYAMIDES, MONO & MULTIFILAMENT. >> EXTRUDER DETAILS : MANUFACTURER : FEP POLYMER YOC : 1997 TYPE : EX 25 - 25 D MAX. THROUGHPUT : CA. 7,0 KG/H (PA6), CA. 5,6 KG/H ( PP ) : CA. 8,2 KG/H ( PET ) NOMINAL SCREW DIA : 25 MM SCREW LENGTH : 25 X D SCREW GEOMETRY : SPECIAL 3-ZONE-SCREW MIXING TORPEDO : CHANGEABLE ATTACHED TO SCREW END , CA 3 X D LONG HEATING CAPACITY : CA. 3,2 KW / 4 ZONES DRIVE : CA. 4,5 KW, AS- MOTOR MIT SCHNECKENGETRIEBE ELECTRICALLY HEATED AND REGULATED TO MAX. 350 ° CELSIUS, EQUIPPED WITH 3 TEMPERATURE CONTROL SENSORS, OVER-TEMPERATURE MONITORING, WATER-COOLED FEED ZONE, REMOVABLE ISOLATION AND BASIC FRAME, INCLUDING INERT GAS IN THE INLET PIPE, EQUIPPED FOR THE SUBSEQUENT RECEPTION OF A TORQUE CLUTCH ON THE GEARBOX END >>> SPINBEAM & MELT PIPE : ELECTRICALLY HEATED SPINBEAM DESIGN : FOR 1 MONFIL OR 2 MULTIFILAMENT THREADLINES SPINPUMPS : 1 = 2 X 2.4CC , 1 = 1 X 2.4 CC , 1 = 1 X 0.6 CC SPINNERETTES : 42 / 59 / 72 >>> Rcodpfxozl Hz Nj Anked QUENCH CABINET : FEP Polymertechnik Gmbh YOC : 1995 TYPE : CROSSFLOW Plant Nr. : 7.1396 >>> WINDER : BARMAG TYPE : SW4S Auftragsnr : 10/0428 YOC : 1988 >>> DRAW – STAND : EDMUND ERDMANN GMBH TYPE : DRAWMOD 02/380-3/5/6 LM YOC : 1995 COM. NR : 13/2492 CONTROLS COMPUTER : EDMUND ERDMANN YOC : 1995 FABR. NR : 132492 >>> PREHEATING OVEN : HERAEAUS Gmbh Type : WU6100 , 500C , 3 Nipe, 400 V 11.4 A, 5.4 kW YOC : 1997 FABR. NR : 97/11055 >>> HOIST IN EXTRUDER AREA : HEBEZEUGFABRIK GMBH, YOC : 1998, CAPACITY : 0,7 TONS LIFTING HEIGHT : 0,8 M

Condition: ready for operation (used), Hole Punch Centre cut Redpsir A Hajfx Ankecd Slim line stitching heads

Condition: excellent (used), Year of construction: 2019, XYZ UMC-5X 5 Axis CNC Vertical Machining Centre Heidenhain iTNC 640 HSCI Control Model UMC-5X Control Heidenhain iTNC 640 HSCI X Axis Travel 600 mm Y Axis Travel 600 mm Z Axis Travel 500 mm A Axis Travel +120° / -120° C Axis Travel 360° Table Size 600 mm Diameter Maximum Table Load 600 kg Spindle Speed 24,000 rpm Direct Drive Spindle Taper BBT40 Rcodpfszi Awhox Anked Rapid Traverse 36 m/min Feed Rate 1 - 36,000 mm/min Tool Changer 60 Station Automatic Maximum Tool Length 300 mm Through Spindle Coolant 70 Bar Machine Weight 9,500 kg Machine Fitted With: Heidenhain iTNC 640 HSCI CNC Control, 24,000 rpm Direct Drive High Speed Spindle (20kW S6 Rated), 60 Station Automatic Tool Changer, 70 Bar Through Spindle Coolant, Fixed Roof for High Pressure Coolant System, Renishaw RMP600 Strain Gauge Wireless Workpiece Probe, Laser Tool Setting System, Kinematic High Accuracy Machine Setup, Kinematic Reference Ball, Thermal Spindle Compensation, Linear Scales on X, Y & Z Axes, Direct Drive C Axis Rotary Table, Swarf Conveyor & Bin. Features: Simultaneous 5 Axis Machining Centre, Gantry Frame Construction, Direct Drive High Torque Rotary Table, High Precision Linear Roller Guideways, Dynamic Collision Monitoring, High Accuracy Machine with Linear Scales, Ideal for Aerospace, Medical, Precision Engineering & Complex Multi-Sided Components. For sale with Jet Machinery Ltd Jet Machinery Stock No: TBC Machine Serial Number: TBC Cost: £120,000.00 Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to inspect the machine prior to purchase. Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: like new (used), functionality: fully functional, Roller shutter - extrusion die set - complete, die head with heating element and calibration tool * die connection currently for Weber CE7 but other mounts available on request Rcjdpexgpbbofx Anksd - double strand 2x 5m/min - roller shutter cover width 52mm - fully retracted - includes mounting plate (as shown) to fit on calibration table

Condition: used, Year of construction: 2004, functionality: unexamined, We are offering this used Kjellberg FineFocus 600 plasma cutting machine, including a new torch and wear parts, manufactured in 2004. Rcedpfx Aezn Hilonked If you have any questions or require further information, please feel free to send us a message or call us.

Condition: excellent (used), Year of construction: 1990, Box containing 34 tool holders suitable for vertical lathes of the TOS HULIN type SKQ or SKIQ. Rcodpfxozn H A Eo Anked

Condition: reconditioned (used), Year of construction: 2010, • Traveling distances X=3100 mm, Y=1950 mm, Z=1390 mm • Heidenhain iTNC 530 with handwheel HR 410 Rcsdszmp E Tepfx Ankjd • Machine table for multi side working 3000 mm x 1600 mm • 2-axis NC-universal milling head, for simultaneous and positioning working • Spindel 10.000 U/min HSK 100, 130 Nm Spindle torque • Tool change system HSK 100 / 40 places for 750 mm long tools • Chip conveyor (screw type) in X-axis, for transport into • Chip conveyor scraper belt type (traverse conveyor), Fabr. Knoll • Coolant container 900 l, Fabr. Knoll • Outside air at spindle • IKZ 60 bar for deep hole drilling function • Covering with safety glass pane, open at the top for loading by crane • 2 part sliding doors at the operator side • 2 part sliding doors at the front side, for easy loading • Radio-controlled measuring probe RMP 60 • incl. washing gun • incl. podiums at the front side and operator side • complete factory overhauled and painted new • short time delivery after arrangement • used machine • Y-axis ball screw in September 2021 incl. bearings renewed • X-axis new linear guiding system, July 2023 changed, renewed • Spindle overhauled at Mai 2023 (clamping system new, clamping cartridge new, rotation unit new, general tests) (at 23105 spindle hours)) • can be visited under power at 72793 Pfullingen • optional fixators • optional installation at customers plant • optional transport • 23122 spindle hours in total • 53991 machine hours in total • Year of construction 2010 Subject to prior sale

Condition: used, Year of construction: 1997, Year: 1997 Table: 1780 x 415mm Spindle Speed 30 – 2066 RPM FIDIA Control Power Draw Bar LOVO Light Rsdpfxowtd Dyj Ankjcd Coolant

Condition: new, Year of construction: 2026, Step adapter for power tools, consisting of four elements that allow diameter reduction from 100 mm to 68/46/40/35 mm. Rcodpfx Anjycvhneked

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK UWS3 universal tool grinding machine for sharpening and tool grinding as well as drill bits, mills, chisels, tool bits, etc. grinding. Grinding machine intended for universal applications due to its adjustable 24-position head. It can be used for grinding drilling bits, mills, tool bits, etc. Durable design and precisely constructed spindle ensure optimal efficiency Diameter 100 mm Thickness 50 mm Hole diameter 20 mm Speed 5200 rpm Sleeves diameter range 3–16 mm Redpfxev E Ek Hs Ankscd Taper angles range 0–180º Negative angles range 0–52º Clearance angles range 0–44º Tool holder longitudinal movement 140 mm Tool holder microregulation range 18 mm Longitudinal spindle movement microregulation range 6 mm Motor 0.25 kW 230V Weight 45 kg Machine dimensions 450×350×340 mm

Condition: good (used), The Chai Open qPCR A1015 is a compact and portable real-time PCR system designed for the amplification and detection of DNA and RNA targets. The instrument features a 16-well sample block and supports reaction volumes ranging from 10 to 50 µL. Its dual-Peltier thermal system provides fast and accurate heating and cooling, with a maximum ramp rate of up to 5 °C per second. The Open qPCR software is browser-based and can be accessed from a PC, Mac, or tablet. The system supports USB, Ethernet, and Wi-Fi connectivity, allowing for flexible integration into a laboratory environment. Rcsdpszlbinefx Anksd The instrument is suitable for a wide range of research applications, including gene expression analysis, pathogen detection, GMO testing, nucleic acid quantification, and melt curve analysis. Technical Specifications Model: A1015 Capacity: 16 wells Supported tubes: 100 µL low-profile PCR tubes Sample volume: 10–50 µL Temperature range: 4–100 °C Maximum ramp rate: 5 °C/s Heated lid temperature: up to 120 °C Connectivity: USB, Ethernet, and Wi-Fi Integrated 5-inch touchscreen Browser-based software Compatible with PC, Mac, and tablets Power supply: 100–240 V, 50–60 Hz Dimensions: approximately 28 × 24 × 19 cm Weight: approximately 5 kg

Condition: repair required (used), functionality: limited functionality, Offered for sale is a Maho 700 milling machine. Visually and technically in good condition. Includes digital readouts for the X, Y, and Z axes. Comes with a machine vise (as shown in the photos). It was used by us for apprentice training. The machine is being sold as in need of repair. Feed in the X and Y axes functions perfectly. The feed in the Z-minus direction also works. Only in Z-plus (raising) does it stick a little. However, this should be fixable with maintenance. The machine can be inspected under power in 45659 Recklinghausen. Rsdpfxjy Rxvlo Ankscd

Condition: used, BARMAG extrusion system consisting of: 1x extruder BARMAG KEP 200-26,3,3-S 1x transmission gear KNÖDLER FZ 6000 2_Z-ED 200 - NEW, year of manufacture 2016 1x drive motor SIEMENS 1GG6208 with external ventilation 470V, 468A, 206kw, 2600rpm, Err. 310V, 6.8A - NEW, year of manufacture 2015 1x control unit 1x dosing unit SCHOLZ incl. Feed hopper with level sensor - year of manufacture 2004 System features: - Single-screw extruder, year of manufacture ca. 1973 - Throughput 800kg/h - Conversion to new drive + gearbox in 2016 - Screw diameter 200mm - Screw length 5266mm - Process length 26.3D - Geometry: feed - barrier - mixing section - Screw material: nitrided steel - Technical documents Subject to prior sale Please send inquiries by email only Rcodpfx Aneuak Nleked Note: The machine is still installed and can be inspected on site. The buyer must dismantle it himself and organize shipping. This is not part of the offer price.

Condition: good (used), Square broaching tool, multi-slot broaching needle, broaching tool, broaching needle, slotting tool, slotting tool, push broaching needle, keyway push broaching needle -Manufacturer: Forestry, Clearing Needle, Push Clearing Needle, 3 pieces -Type: see photos -Keyway width: 2x 10 mm / 1x 12 mm -Submission/Price: complete -Transport dimensions: 1085/33/H32 mm Rsdpfxozlgb Ns Ankecd -Weight: 6.5 kg

Condition: good (used), Year of construction: 2004, functionality: fully functional, measuring range X-axis: 316 mm, measuring range Y-axis: 120 mm, measuring range Z-axis: 315 mm, Zoller Hyperion 320EZ Rcjdpjwwl S Hefx Ankjd Tool holders for Miyano, Boley, and Index machines

Condition: excellent (used), functionality: fully functional, X-axis measuring range (tool diameter) approx. 350 mm Rsdszlqztepfx Ankjcd Measuring range, Z-axis (tool length): approx. 400 mm Max. tool weight: 10 kg Tool holder/base holder: SK 50 Tool adapter: SK50 to SK40 Measurement display with operating instructions/manuals Tool presetter in very good condition.

Condition: used, functionality: fully functional, empty load weight: 5,150 kg, total length: 2,750 mm, load capacity: 11,340 kg, construction width: 3,400 mm, Accessories Condition: Refurbished without warranty Technical condition: very good Rcedpfx Anszlli Sskjd Description: SMAG 2-shell bulk material grab, S/N 5311, Capacity 6,3m³,

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis digital display K&C, stepless feed, light gray color, CE compliant, in excellent condition. Technical data: Rcodpjzl Uz Defx Ankjd >> Year of manufacture 1980, machine number 2101-1423 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Stepless feed on 2 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Rapid traverse >> Travel distances X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support, adjustable by 100 mm >> Vertical and horizontal quill - SK40 >> Clamping system M16 >> Weight approx. 700 kg Accessories and equipment: >> 3-axis digital display K&C, newly installed with manufacturer's warranty and operating manual. Display unit: Setting reference points, zero points, entering coordinates, switching between mm/inch, absolute or incremental coordinates, circular functions, hole patterns, radius milling functions, etc. >> Coolant system >> Machine lamp >> Operating manual, parts list >> Tool holders, vise, backstop About the machine: Offered is a universal milling machine Deckel FP1, CE compliant, in very good condition. The machine has very little backlash and all spindles move easily. The bellows are all new. In this newer FP1 model, the feed is steplessly adjustable on two axes, and the machine also has a rapid traverse function. An oil change has been carried out. Mechanically and electrically inspected. Thanks to the new digital display from K&C, working with the machine is easier and even more precise. Take advantage of the opportunity to inspect and test this machine on-site while it is powered on.

Condition: used, Year of construction: 2022, operating hours: 215 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.550 kg Mast: articulated arm Redpfx Aeyunm Henkscd Lifting capacity: 200 kg Working height: 995 cm Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: new, Year of construction: 2024, operating hours: 80 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.870 kg Mast: articulated arm Lifting capacity: 200 kg Working height: 1.460 cm Rental currency: EUR Please contact KEY-TEC Sales for more information Rodpfx Aoywrcrenkecd

Condition: used, Year of construction: 2021, operating hours: 210 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.700 kg Mast: articulated arm Rcsdowvylrepfx Ankjd Lifting capacity: 200 kg Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: used, Year of construction: 2021, operating hours: 195 h, axle configuration: 4x4, fuel type: electric, Equipment: all wheel drive, Drive: Wheel Empty weight: 6.700 kg Rcjdswvpd Dspfx Ankjd Mast: articulated arm Lifting capacity: 200 kg Rental currency: EUR Please contact KEY-TEC Sales for more information

Condition: excellent (used), Collet chuck/quick-change inserts Cone 38 mm Collet cone diameter max. 27.7 mm Collet cone diameter min. 24.2 mm Rodpfewf Ha Iox Ankecd Length 45 mm Outer diameter 30 mm Stock number (28603)

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and continuously variable feed, in very good condition, CE compliant. Technical data: >> Year of manufacture: 1987, Machine No. 2102-3562 >> Fixed angular table >> Speed: 40 - 2000 rpm >> Continuously variable feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travel ranges X/Y/Z: 300/160/340 mm >> Vertical milling head on spindle support, adjustable by 100 mm >> Vertical and horizontal quill - SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, spare parts list >> Tool holders, vise, counter holder About the machine: Rjdpfxszl Eifo Ankscd Offered is a universal milling machine Deckel FP1 in very good condition and CE compliant. The machine has very little backlash and all spindles can be moved easily. Even at maximum speeds, the milling machine runs very smoothly. In this newer FP1 model, the feed is continuously adjustable in three axes, and the machine also has rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically approach. The FP1 was located in a training workshop, where it was only used occasionally. An oil change has been carried out. Mechanically and electrically tested. The digital display from Heidenhain makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on-site while it is powered up.

Condition: excellent (used), functionality: fully functional, Universal milling machine Deckel FP1 with 3-axis active digital display TNC 113 Heidenhain and stepless feed, in very good condition. Accessories, CE compliant. Technical data: >> Year of manufacture 1992, machine no. 2102-7007 >> Fixed angular table >> Speed: 40 - 2000 rpm Rsdjzl Ebbjpfx Ankecd >> Stepless feed in 3 axes >> Rapid traverse in 3 axes >> Drive power: 1.5 / 1.9 kW >> Spindle brake >> Travels X/Y/Z: 300/160/340 mm >> Vertical milling head, adjustable on spindle head by 100 mm >> Vertical and horizontal quill - SK40 >> Clamping system M16 >> Weight approx. 800 kg Accessories and equipment: >> 3-axis digital display Heidenhain TNC113 >> Coolant system >> Machine lamp >> Operating manual, parts list >> Tool holders, vise, counter holder About the machine: Offered is a Deckel FP1 universal milling machine in very good condition and CE compliant. The machine has very little backlash and all spindles move easily. Even at maximum speeds, the milling machine runs very smoothly. A special feature is that the control cabinet is connected to the machine with a plug. This makes it easier to transport the machine. In this newer FP1 model, the feed is steplessly adjustable in three axes, and the machine also has rapid traverse in these axes. A major advantage is the active 3-axis digital display. With this Heidenhain positioning control, you can enter dimensions that the machine will automatically move to. The FP1 was used in a training workshop, where it was only used occasionally. An oil change was performed. Mechanically and electrically tested. The digital display from Heidenhain makes working easier and even more precise. Take advantage of the opportunity to inspect and test this machine on site under power.