Used Juaristi 110 for sale (5,597)

Condition: ready for operation (used), Indramat MAC093A-0-PS-2-C/110-B-0/S001 permanent magnet motor, serial number as shown in the photo, mounting hole spacing: 116 x 116 mm, drive shaft diameter: 24 mm, used, minor signs of wear, 100% functional. Iiedei D Imyspfx Aphsh

Condition: new, Rexroth MAC090C-1-GD-4-C/110-A-2/WI521LV/S013 Permanent Magnet Motor, serial number MAC090-48116, unused after manufacturer's overhaul, in open original packaging, 100% functional. Iiedsi D Nf Hspfx Aphjh

Condition: good (used), Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: single-acting stroke 110 mm -Type: unfortunately without type designation -Piston rod: Ø 18 mm -Hole: Ø 13/16 mm / Distance: retracted 470 mm Iijdev Tkz Hspfx Aphsh -Dimensions: Ø 65 x 500 mm -Weight: 5.1 kg

Condition: used, Braking resistor, charging resistor, damping resistor, filter resistor, brake chopper -Brake resistance: adjustable Iisdpfohfufkex Apheh -Power: 110 Ohm / 2.5 A -Dimensions: 435/90 / H150 mm -Weight: 3.2 kg

Condition: excellent (used), Year of construction: 2003, I sell the 3-axis CNC working centre SCM SCM RECORD 110, year 2003. Configuration: 3-axis main spindle SCM 6,6kW 24.000 rpm Tool magazine 8 positions ISO30 on working head Useful working area 2690x940 x Z 150mm (300mm). Iiedpfjhhruhex Apheh 2 working fields, 4 clamping areas - Flachtisch Automatic central system of lubrication. Pump BECKER 5,5KW 244/286 m3/h. fast neu. Gewicht 3200kg Xilog Plus new software controller with full instructions ! Very good condition. Available immediately.

Condition: good (used), Several measuring probes from Heidenhain are for sale. Ijdpfxshlafne Aphjih -Manufacturer: Heidenhain -Type: TS110 / TS111, untested = €450 each TS110 / TS111, tested = €750 each TS220 / TS230 = €1,250 each ! As several measuring probes are for sale, please specify the desired type! -Mount: SK50

Condition: good (used), Geared motor, electric motor, electric geared motor Iisdsguzr Rspfx Apheh -Manufacturer: Caenaho, geared motor type PA-09 / RD-09 -Voltage: 110 V / 50 Hz -Speed: 137 rpm -Performance: 1.27 m Technical data: see photo of the type plate Quantity: 1 piece available Price: per piece -Dimensions: 240/120/H200 mm -Weight: 6.2 kg

Year of construction: 1995, condition: good (used), Radial fan from Venti Oelde with inlet silencer. !! Performance curve provided as an image attachment!! Volume flow: 46,308 m³/h Pressure increase: 4830 Pa / 48.3 mbar Weight: 2750 kg Temperature: 30°C Speed: 1480 rpm Fan efficiency: 82.9% Shaft power: 73.8 kW Iisdpfxjd Nqlce Aphsh Motor power: 110 kW (90 kW also possible) Motor: VEM 315 S4 Voltage: 400 Volt / 50 Hz Year of manufacture: 1995

Condition: ready for operation (used), Indramat 093B-0-GS-2-C/110-A-2 Servo motor SN: 26939,used, good condition, 100% functional, scope of delivery as per photos Iedpfx Apoq N Ud Sshjih

Condition: used, Year of construction: 2023, Equipment: compressed air brake,

Condition: used, Base for folding tool, bending tool, die, lower knife, lower tool, prism tool, reversible prism, 1-part die block for die bending machine Isdsfiqrmjpfx Aphoih -Tool for: press brake -Support for: press brake tool -see drawing: at the photos -Number: 2x documents available -Price: per piece -Dimensions: 3600/110/H32 mm -Weight: 76 kg

Condition: good (used), Machine vice, sturdy vice, drill press vice Iiedpfofldb Nox Aphoh -Jaw width: 160 x 50 mm -Clamping depth: max. 110 mm -Dimensions: 460/160/H120 mm -Weight: 36 kg

Condition: refurbished (used), Year of construction: 2008, functionality: fully functional, This 2 shaft rotary shear will completely refurbished. The cutting unit is equipped with 58mm blades, but can be adapted on request. The drive power is 2 x 75 kW. Fast knive change system incl. coupling. The machine includes a hydraulic pressure device, a feed hopper and a electrical cabinet including Siemens S7 control and coloured HMI 9". Painting can be adapted in a RAL colour on request. Iiedpfx Asfdvd Ijphsh

Condition: new, Year of construction: 2026, Machine manufacturing time: approx. 3.5 months Very robust machine with high pressing force - also suitable for producing marketable briquette quality, depending on the material. The large-sized pressing cylinder and the 65 mm briquette make this possible. Our best-selling briquetting press series + Proven, simple technology for extremely low susceptibility to errors + 25 years of experience, continuous development and know-how + Several thousand machines in operation with satisfied customers Iedpfx Aeffh Atephjih + Good price-performance ratio Options: Additional cost for cooling unit: €3,995 net (can also be retrofitted later) * cools the pressing jaws (important for operation of 3.5 hours or more) and the hydraulic oil * Cooling unit recommended for regular operation of more than 3.5 hours at a time. Large pre-compression chamber: €1,975 net Recommended for lightweight raw materials such as wood shavings Commodity code: 84793010 Briquette diameter: 65 mm Front bushing: 65 mm Briquette stroke max.: 50 mm Briquette stroke opt.: 50 mm Performance (material-dependent): up to 110 kg/h* approx. 87 kg/h in the last test. *depending on the bulk density *based on a bulk density of 200 kg per cubic meter. Motor power: 5.5 kW 400 volts / 50 Hz / 3-phase Length: 1925 mm Width: 1100 mm Height: 1500 mm Weight: 800 kg Oil volume: 110 liters Silo diameter: 1000 mm Silo volume: approx. 0.7 cubic meters Pump: 37 liters Hydraulic pre-compressor Option: Cooling of pressing jaws: yes, with special accessories for coolable pressing jaws Cooling of the pressing jaws via water tank (to be provided on site) Option: Cooling of hydraulic oil: yes Option: Level monitoring: yes Option: Log briquettes: yes (material-dependent) CE compliant Requirements for the raw material: - The moisture content (oven-dry) must be between a minimum of 6% and a maximum of 18% - Chip length maximum 15 mm - Installation temperature: temperature-controlled room at a minimum of +5°C - The feed material must be free of metals and mineral impurities such as sand, stones, etc. Damage to the pressing tools and/or increased wear can result.

Condition: used, Year of construction: 1991, Maximum punching force: 1100 kN Maximum shearing force: 1700 kN Stroke discharge: 510 mm Hole 31 in 25 mm Flat bar: 500 x 22 mm Hydraulic hold-down for the flat bar blade Four-square latch Weight: approx. 5000 kg Ijdpof Nwn Uefx Aphjih Very good condition

Condition: used, Tailstock, counter bearing for dividing head, dividing head, tailstock for tool grinding machine, cylindrical grinding machine -Tip height: 110 mm -Dimensions: 218/117/H190 mm Isdpfxed N Apqe Aphoih -Weight: 11 kg

Year of construction: 1990, condition: used, 2. Tool turret heads, manufacturer DUPLOMATIC, year of manufacture approx. 1990, type: BSV-N250 8/20-110/50. Tool holder size VDI50. Tool stations: 8. Center height: 125 mm. Price per piece. Iedpfx Ajbaf Spephsih

Condition: ready for operation (used), Indramat MAC093A-0-PS-4-C/110-A-0/WI560LV Permanent magnet three-phase servo motor SN:19865,used, normal signs of wear, 100% functional, scope of delivery as per photos Iodjumfv Iopfx Aphjih

Condition: used, mileage: 184,000 km, power: 70 kW (95.17 HP), first registration: 12/2011, fuel type: diesel, overall weight: 2,800 kg, color: silver, gearing type: mechanical, emission class: euro5, number of seats: 2, Year of construction: 2011, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), soot filter, Mercedes Vito 110 CDI / handbrake defective / Iisdpfsumfzdox Aphjh Battery 100 Ah, wideband loudspeakers at the front, rear door (opening angle 180 degrees), wooden floor in the cargo area, metallic paintwork, radio preparation, seat belt system with warning system (driver’s side), socket (12V connection) in the cargo/passenger compartment, lining in the cargo/passenger compartment: plywood, auxiliary heater Adaptive brake light, airbag on the driver’s side, design: Vito panel van, exterior mirrors aspherical, both, exterior mirrors mechanically adjustable from the inside, both, mounting rails for roof rack, brake assist, windshield with antenna, generator 180 A, interior filter: pollen filter, body/superstructure: panel van, body/superstructure: compact, solid cargo compartment partition, steering wheel (steering column mechanically adjustable), truck registration, model revision, engine 2.1 L - 70 kW CDI, wheelbase 3200 mm, tire repair kit with compressor, low emissions according to exhaust standard Euro 5, sliding door cargo/passenger compartment on the right, seat cover/upholstery: fabric Lima, steel rims 6.5x16

Condition: used, Year of construction: 1986, Second-hand machine Year of manufacture: 1986 Features and technical specifications: Motor: 4 kW Speeds: 3,000 / 4,500 / 6,000 / 8,000 / 1,000 rpm. Spindle height adjustment via handwheel Dimensions: 1200 x 80 x 1350 mm Wooden clamping jaws Includes Holz Her 3-roller feed unit and stand Iijdpfx Aozk Nw Ropheh with chassis Availability: at short notice Location: Röllbach

Condition: used, Year of construction: 2015, operating hours: 12,091 h, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Load capacity: 8,000 kg Lifting height: 5,450 mm Mast: Triplex mast with full free lift Fork length: 2,000 mm Fork adjustment: Hydraulically adjustable MACHINE DETAILS Machine type: Diesel forklift UVV certificate valid until: 05/2027 Dimensions & Weight Dimensions (L × W × H): 6,300 × 2,400 × 3,200 mm Dead weight: 15,000 kg Operating hours: 12,091 h EQUIPMENT 3rd and 4th valve Formerly a Linde full-service unit Full cabin Heater Iisdpfxjz S Nm Tj Aphjh Windshield wiper LED work light front LED work light rear Safety light rear Comfort seat Lumbar support Seat heating If requested, a mast that is too high can be disassembled for transport and loaded accordingly. All dimensions are approximate values. No guarantee is given for typing or measurement errors. Collection conditions: Lateral loading up to 6 t is possible with a large forklift on site. Loading is at your own risk. Rear loading via ramp is possible with a truck height of 100–150 cm, up to 15 t and up to a width of 230 cm. Collection is only possible after receipt of the payment confirmation by email. Collection without prior notification from Monday to Friday between 07:00 and 16:00. If collection is not carried out on time, a storage fee of €20 per machine per day will be charged. Outstanding storage fees must be paid in full before collection. Lot number: 3

Condition: new, bending length: 2050sheet thickness: 3upper roll diameter: 110 Technical specifications: - Back roll with motor - Cone bending device - Hardened and polished rolls - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.260,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 1.136,-- - Special voltage EURO 480,-- Iedpfsd Ab N Aox Aphsih - Material feeding table - Lower roll is powered by electric motor We have many references!

Condition: new, bending length: 1250sheet thickness: 4upper roll diameter: 110 Technical specifications: - Back roll with motor - Cone bending device Iiedpfx Aod Ab N Esphjh - Hardened and polished rolls - Body is made of St 52 steel - Main motor with brake system - Top and bottom rolls are driven bybrake electric motor, gears and gearbox system - Portable control panel  - Cast iron body - Movement of the back and lower rolls up and down manually - In acccordance with CE norms Options: - Back roll powered by electric motor EURO 1.166,-- - Digital readout for displaying position of the backroll EURO 1.010,-- - Hardened rolls EURO 827,-- - Special voltage EURO 480,-- - Material feeding table - Lower roll is powered by electric motor We have many references!

Condition: good (used), Included in the scope of delivery: 01x rail / track, used Rail profile: S41-10 Total length: approx. 3,000 mm Width: approx. 125 mm Height: approx. 140 mm Head: approx. 67 mm Web: approx. 12 mm Weight: approx. 120 kg / pc. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Iodsxg Rctjpfx Apheih This item is offered for collection only. Any requested transport or shipment of this item will incur additional costs, which will be quoted separately depending on the place of delivery and scope – please contact us for further details.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, operating hours: 17,446 h, power: 11 kW (14.96 HP), input voltage: 400 V, oil tank capacity: 130 l, total length: 3,300 mm, total width: 2,000 mm, total height: 2,440 mm, overall weight: 8,900 kg, controller manufacturer: DELEM, controller model: DA65, working width: 3,100 mm, bending force (max.): 110 t, control type: CNC control, number of axes: 8, actuation type: hydraulic, Equipment: CE marking, documentation/manual, emergency stop, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, For sale: Used press brake DARLEY EHP-L 110 31/25, year of manufacture 2000. The machine is in excellent technical condition and is highly reliable. Very precise and offers repeatable results. In December 2023, all cylinder seals as well as the hydraulic oil and filters were replaced. Iisdex N Ibhopfx Aphoh In February 2024, the upper WILA tool clamping system was serviced. The machine has very few operating hours. Hydraulics: Hoerbiger Machine number: 122067 Machine type: EHP-L 110 31/25 Year of construction: 2000 Maximum pressing force: 1100 kN Working length: 3100 mm Power: 11 kW Voltage: 400 V Hydraulic oil tank capacity: 130 l Hydraulic system pressure: 28 MPa Weight: 8,900 kg Tooling type: Hydraulic Wila / Trumpf Control: DELEM DA65 Number of axes: Y1, Y2, X1, X2, R1, R2, Z1, Z2 + crowning compensation If you have any questions or would like more information, please send us a message or contact us by phone.