Used Kasto Sba 260 Au for sale (9,219)

Condition: used, Year of construction: 1990, Cutting capacity at 90°: round: 210 mm Guedpfxoymb Afs Abfsf square: 210 mm flat: 240 x 190 mm Cutting capacity at 45°: round: 150 mm square: 150 x 100 mm flat: 150 x 100 mm Saw blade dimensions: 400 x 30 x 1.5 mm 2 stroke speeds via pole-change motor: 16 and 32 m/min Drive motor: 380 V, 0.9 kW Weight: 170 kg Space requirement: 1190 x 480 x 1300 mm

Condition: good (used), Year of construction: 2001, Cutting 90°: 330 Cutting flat 90°: 330 x 330mm Cutting speed Vario:12 - 120 Circle blade size: 6830 x 41 x 1,3mm Power: 7.5kW Length: 4600mm Width: 2150mm Gedpfx Absu R R Acofouf Height: 2310mm Weight: 4300kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2001, Manufacturer: KASTO Type: KASTOtec A4 Year of construction: 2001 Specifications: Metric Gusdpfju R R Avjx Abfof Metric US Standard Sawing capacity round 90 430 Sawing capacity flat 90 430 x 430 mm Feed range 0 - 600 mm Multi-feed range 0 - 9999 mm Min, saw length 35 mm Max. Sawing speed 12 - 120 Saw blade dimensions 6830 x 41 x 1.3 mm Saw power 7.5 kW Dimensions (estimate) length 4800 mm width 2200 mm Height 2200 mm weight 5200 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Hydr. hacksaw KASTO HBS 210 / 240 Machine no. No. 1116 145 220 Year of construction 1994 Sawing range at 90° round 210 mm flat 240 x 190 mm Gjdpfx Aouqgbtobfouf square 210 x 210 mm at 45° round 150 mm Saw blade length 400 mm Number of strokes 62 / 125 strokes per min. Material support height 500 mm Motor power 0.5 / 0.75 kW Mains connection 400 Volt, 50 Hz - Drive motor with 2 speeds - Coolant pump in the machine base frame Space requirement L x W x H 1200 x 500 x 1200 mm Weight 170 kg Good condition

Condition: used, Year of construction: 1996, cutting diameter 280 mm capacity 90 degrees: flat 280 x 160 mm Gjdey N D H Tepfx Abfouf capacity 90 degrees: square 240 x 240 mm band length 425 x 40 mm capacity 45 degrees: round 180 mm capacity 45 degrees: flat 150 x 250 mm capacity 45 degrees: square 170 x 170 mm total power requirement 1,8 kW weight of the machine ca. 450 kg dimensions of the machine ca. 1,4 x 0,8 x 1,0 m

Condition: good (used), Bow Saw KASTO PSB 260 AU Cutting ranges: Round bars: 260 mm Square bars: 240 x 240 mm Guedpfx Asx Ecthobfof Rectangular bars: 260 x 185 mm Cutting length: up to 750 mm

Condition: excellent (used), Year of construction: 2010, Kasto Functional A horizontal band saw Year: 2010 Technical details: max cutting diameter 260 mm saw band length 3830 x 29 x 0,9 mm cutting speed 19-100 m/min total power requirement 2,2 kW weight of the machine ca. 860 kg dimensions of the machine ca. 1550 x 1700 x 1480 mm vice opening 300 mm angle cutting left/rigt: 45degree/60degree Kasto Compact Control - colour touchpad screen Frequency controlled saw drive Infinitely adjustable cutting feed Hydraulic clamping vice Godpfx Aoy Urz Nobfeuf Material feed Coolant system Speed control c/w roller conveyor, saw blades, documentations

Year of construction: 2020, condition: as good as new (ex-display), Bandsaw machine Manufacturer: KASTO Model: micut P 2.6 Year of manufacture: 2020 - Demonstration machine Machine no.: 6151 101 006 With warranty Standard equipment includes: - Stepless cutting speed 20 - 110 m/min - Horizontal clamping device, manual tensioning - Stepless miter adjustment (-45° to +60°) - Stepless saw blade arm adjustment - Adjustable saw feed via self-weight - Cutting guide as material support - Automatic shutdown after cut completion - Coolant system - Operating manual Guedpsdur E Asfx Abfef With the following options: - Drip oiler

Condition: new, functionality: fully functional, empty load weight: 720 kg, maximum load weight: 1,880 kg, overall weight: 2,600 kg, loading space length: 5,020 mm, loading space width: 2,030 mm, loading space height: 300 mm, Product information "Hulco MEDAX-2 2600kg 502x203x90cm Corrugated Mesh Extension" Tandem high-loader from the manufacturer HULCO, model MEDAX-2 2600.502x203. As standard, the Hulco flatbed high-loader with brakes features all folding and removable aluminum side walls, a very stable, swing-and-removable corrugated mesh extension, sturdy eccentric locks, internal lashing eyes, external lashing hooks, profile channels for attaching accessories or load securing, a very stable welded lattice steel frame, extendable tailgate supports, a support wheel, and a V-drawbar. We also offer accessories for Hulco car trailers, such as high tarpaulins, net hooks, loading ramp kits with holders, rear support kits, accessory boxes, straps, and anti-theft devices. The Hulco flatbed high-loader with brakes features all folding and removable aluminum side walls, a very stable, swing-and-removable corrugated mesh extension, sturdy eccentric locks, internal lashing eyes, external lashing hooks, profile channels for attaching accessories or load securing, a very stable welded lattice steel frame, extendable tailgate supports, a support wheel, and a V-drawbar. We also offer accessories for Hulco car trailers, such as high tarpaulins, net hooks, loading ramp kits with holders, rear support kits, an accessory box, straps, and an anti-theft device. ... ----- You can also get: · Financing · Leasing (businesses only) · Consulting · Delivery throughout Germany (except islands) · Accessories · Rental trailers · Spare parts Gsdpfx Aowhy Rrebfsuf · Registration service for DH – HB – DEL · Service · Repairs · TÜV inspection for car trailers Ahrens Car Trailer Center, Moordeicher Landstraße 37, 28816 Stuhr near Bremen Opening hours: Monday - Friday 8:00 a.m. - 5:00 p.m.

Year of construction: 2004, condition: good (used), A used, well-maintained double miter cold circular sawing machine from KASTO, model: “KASTOdisc A10” - Fully automatic operation - Single cut - Hydraulic clamping cylinders Godpjkfvhkjfx Abfjuf - Central lubrication for saw guides - Coolant system - Documentation Saw blade diameter 350 mm Cutting range: Round 90°/45° 100/100 mm Square 90°/45° 100x100/100x100 mm Rectangle 90°/45° 170x100/130x100 Shortest remaining piece length in single cut at 90°: 30 mm Shortest remaining piece length in automatic operation at 90°: 260 mm Working height 950 mm Dimensions (W x D x H) 1530x1348x1890 mm Weight 980 kg Further technical data can be found in the PDF document. Technical data and dimensions: Subject to change.

Condition: excellent (used), Year of construction: 2010, machine/vehicle number: 6459103320, functionality: fully functional, Technical Data KASTOtwin A 2 Dimensions of standard machine Length: 1,755 mm Width: 2,475 mm Height: 1,570 mm Guodjtiwz Iepfx Abfsf Total weight approx. 1,700 kg Total drive power: 5.0 kW Cutting range in mm approx.: Cutting range Ø 260 mm Cutting range, flat (W x H): 260 x 260 mm Smallest round dimension Ø 10 mm Square, H x W: 10 mm Single feed length max. 750 mm Multiple feed: 9,999 mm Shortest cut length: 6 mm Smallest diameter to be cut: 10 mm Minimum remnant per single cut: 15 mm Shortest remnant length in automatic operation: 100 mm Cutting speed, infinitely variable: 20 - 100 m/min Saw band dimensions: 4,530 x 34 x 1.1 mm Material support height: 700 mm Cutting feed: infinitely adjustable Material feed: ball screw spindle Band tension: hydraulic

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: 3515 104 114, saw blade diameter: 350 mm, cutting range round steel at 45°: 100 mm, cutting range round steel at 90°: 100 mm, total length: 800 mm, total width: 1,250 mm, overall weight: 350 kg, cutting range square steel at 90°: 90 mm, The KASTOdisc U 10 is a robust semi-automatic vertical cold circular saw, suitable for precise metal cutting in workshops and medium series. Featuring two speeds and an adjustable feeder, it offers flexibility and high-quality cuts, while the pneumatic clamp stabilizes the material. Godpfx Abswxcuzofsuf

Condition: excellent (used), mileage: 805,315 km, power: 191 kW (259.69 HP), first registration: 01/2013, fuel type: diesel, fuel: diesel, color: other, driver cabin: day cab, gearing type: mechanical, emission class: euro5, loading space length: 7,050 mm, loading space width: 2,470 mm, loading space height: 2,390 mm, Year of construction: 2013, Tail lift: DHOLLANDIA YV2TH40A6DB643880 Cool unit brand: Carrier = More information = Empty weight: 8.610 kg Carrying capacity: 7.390 kg GVW: 16.000 kg Cooling engine: diesel and electric Technical condition: very good Visual appearance: very good Registration number: CQ695AN = Dealer information = Do you have any questions or suggestions? Please feel free to contact us. We guarantee a response within 8 hours. Prices do not include VAT. No rights may be derived from the information provided. Office phone number: Mobile: Dutch - English - German - French - Spanish - Italian) Available via WhatsApp and Viber. Mobile: Available via WhatsApp and Viber. When paying by bank transfer, the funds must be transferred to our bank account listed below. Always verify the payment details on our website. Please contact us if you have received different information. If in doubt, please call us so we can verify the invoice and/or payment. Bank details: Guedpfxjymq Dlj Abfof Bank name: ING Bank address: Bijlmerdreef 106 1102 CT Amsterdam IBAN number: NL97INGB0117176699 EORI/VAT/TAX: NL810574901B(01) BIC/SWIFT: INGBNL2A

Condition: new, Year of construction: 2025, We currently have 4 units of this model available. JCB G65QS Diesel Generator: 60KVA & DSE 7310 G65QS * 60KVA prime-rated * 3-year or 8,800-hour warranty * JCB DieselMax engine * Fuel optimized * Socket pack: 1 x 63Amp, 1 x 32Amp & 2 x 16Amp * 3-way valve * Central lifting point Gujdey Aiqwspfx Abfjf * Fork pockets * Engine sump pump * Bump stops * DeepSea 7310 control panel * Earth leakage protection * CE certification ----11914+11913+11912+11911 Errors and prior sale excepted.

Condition: new, Year of construction: 2025, Currently, we have 3 units of this model available. JCB G45QS Diesel Generator: 44.8 kVA CONSTRUCTION SPECIFICATION ----* Lockable maintenance access doors * Control panel viewing window * High-density fireproof foam * CE pack * Central lifting point * Fork pockets * 12V starter battery * Sump oil drain pump * Socket wrench cover * Deep sea electronics control panel * Bunded base fuel tank TECHNICAL SPECIFICATION * Prime power: 41 kVA * Length: 2250 mm * Width: 840 mm * Height: 1350 mm Gsdpfxoy Aiqqs Abfjuf * Weight: 1070 kg * Total fuel capacity: 77 L * Fuel consumption: 7.06 L/h * Noise level: 66 dB(A) ----11917, 11916, 11915 Vehicle number: Errors and prior sale excepted.

Condition: new, maximum load weight: 39,070 kg, overall weight: 45,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete inventory of immediately and short-term available vehicles on our website. Partial list of features. Full equipment details available upon request. Chassis: * Welded construction made of high-quality steel profiles with continuous profile cross-members, designed for high point loads * Outer frame as UNP profile * Fifth wheel plate approx. 8 mm, underride guard nose approx. 700 mm wide Coupling device: * 2-inch kingpin (also prepared for 3.5-inch) Underrun protection: * According to EC regulations, bolted design Side underrun protection: * According to EC regulations Landing gear: * 24 t landing legs with single-sided operation (approx. 66 t test load), Jost Modul CH (Heavy Duty) S-foot Axles: * 3 x 9 t air suspension axle units, brand SAF, with disc brakes approx. 430 x 45 mm, ABS, hub-piloted with 10-lug ET 120, total air suspension stroke approx. 200 mm (approx. 140 mm lift, approx. 60 mm lower), control via rotary slide valve with detent, with RTR function * Switch for second ride height (+ approx. 50 mm) on the holder of the lift/lowering device * Smartboard/TIM/Infocenter, without TPMS display Lift axle: * First axle liftable, with fully automatic load-dependent lift control, start aid via button in driver's cab (15-pin socket PIN12). Button in cab not included in delivery Brake system: * Two-line compressed air braking system according to EC regulations with EBS and RSS, automatic load-dependent control, spring actuators as parking brake, non-interchangeable coupling heads permanently mounted on the front cross beam, without connecting line to the tractor, brand Wabco Tyres: * 6 units, 385/65 R22.5 160J on 11.75 x 22.5 rims (brand at our discretion), ET 120 * Basic tyre pressure monitoring, connected to the CAN-bus system of the EBS * Tyre pressure monitoring display in driver's cab (prepared by the tractor manufacturer) Mudguards: * According to EC regulations, PVC mudguards (half-shells) over all axles * Anti-spray mud flaps Load securing: * 8 pairs of hook plates welded into the outer frame (traction approx. 3 t) * 6 pairs of lashing rings on the side of the outer frame, evenly distributed (traction approx. 10 t) Stake pockets/stakes: * 5 pairs of stake pockets recessed in the outer frame, approx. 90 x 90 x 4 mm * 3 pairs of stake pockets recessed in the loading floor, approx. 90 x 90 x 4 mm * 10 plug-in stakes made of galvanized square tubing, approx. 80 x 80 x 4 mm, with bottom stop Front wall: * Bolted front wall, approx. 1,200 mm high, metal plated Gsdpfeyz E T Sox Abfouf Stake magazine: * Magazine for plug-in stakes inside the front wall Floor: * Approx. 28 mm hardwood floor recessed in the outer frame, with galvanized omega steel profiles Lighting system: * According to EC regulations, 24V with multi-chamber lights, LED side marker lights, LED position lights (white, front), LED outline marker lights (rear), license plate lights * 1x 15-pin and 2x 7-pin connectors on the front cross beam Equipment: * Warning sign according to ECE 70 * 2 LED work lights mounted on the lamp bracket (switched via reverse gear) * Bracket for rotating beacon at the rear (incl. beacon) * 1 foldable, extendable access ladder at the rear (without platform) * 2 stainless steel toolboxes, approx. 450 x 450 x 450 mm, in front of the front wall * Smart-Board with axle load display * 2 LED work lights above the front wall, switchable via chassis frame switch * 2 LED work lights at the height of the supports (switched via reverse ge

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, KASTOtec AC 4 Cutting Capacity Round: 430 mm Cutting Capacity Square H x W: 430 x 430 mm Cutting Capacity Flat H x W: 430 x 430 mm Clamping Range: 0 – 430 mm Smallest Workpiece Dimension: 10 x 10 mm Minimum Cut-off Length: 6 mm Shortest Remainder Length in Automatic Operation (only for geometrically flawless surfaces): 35 mm Shortest Remainder Length in Single Cut: 10 mm Dimensions and Weights: Length approx.: 2,140 mm Width incl. chip conveyor: 4,610 mm Height (saw frame lowered) approx.: 2,195 mm Height (saw frame at highest position) approx.: 2,410 mm Material Support Height: 700 mm Total Weight: 4,300 kg Year of Manufacture: 2003 Performance Data: Total Connected Load: 25 kW Saw Motor Power: 15 kW Drive Power at Flywheel: 14 kW Cutting Speed—stepless, 50/60 Hz version: 12 - 120 m/min Automatic Material Feed Length Single: 600 mm Saw Blade Dimensions: 6,830 x 41 x 1.3 mm Coolant Tank Capacity: 150 l KASTOtec AC 4 Fully hydraulic high-performance band saw in heavy-duty design Suitable for cutting round, square, flat material as well as tubes and profiles in all grades, especially for tool steels and difficult-to-machine materials such as titanium, Hastelloy, Inconel, etc. Machine Base Torsion-resistant welded construction Saw Unit of steel-mineral composite construction Saw Unit Guidance High-performance sawing technology requires backlash-free and low-maintenance guidance systems. Two vertical square guide columns, one linear guide unit with backlash-free set carriages, as well as two preloaded and adjustable rollers on a guide rail ensure high rigidity and cutting accuracy. Greater machining performance, shorter cutting times, higher blade life, and maintenance-free guide systems with high availability characterize the new KASTOtec. Saw Blade Guidance Side guides by hydraulically preloaded carbide slide guides with quick lift feature for fast blade changes. Back guide by oscillating carbide slide guides. Automatic adjustment of the movable blade guide according to the width of the material to be cut. Material Lift Device After cutting in automatic cycle, the workpiece is moved approx. 2 mm away from the blade on the feed side using the material lift device while clamped (increases blade life). Options for the Machine - Carbide package - Coolant monitoring - Blade tracking - Speed monitoring - Machine lamp - Roller conveyor - CNC control - Special chip conveyor - Carbide package Gedpfx Absy Dckmjfeuf Discharge Roller Conveyor for the KASTOtec AC 4 available in stock, dimensions: 1200 mm long, 500 mm support width, 6 transport rollers

Condition: used, Year of construction: 2009, machine/vehicle number: 3122 102 015, functionality: fully functional, operating hours: 36,000 h, power: 10 kW (13.60 HP), input voltage: 400 V, input current: 25 A, input frequency: 50 Hz, total height: 1,900 mm, overall weight: 2,700 kg, Equipment: CE marking, documentation/manual, CNC Metal Sawing Center Kasto Kastoflex F Year of manufacture: 2009 Operating hours: 36,000 h Machine depth: 4,800 mm Machine height: 1,900 mm Machine weight: 2,700 kg Voltage: 400 V With automatic feed Offcut bunker Coolant system Mitre cutting Loading station, chain magazine with 20 compartments on the infeed side Guodpfx Aboy Alufofsf Discharge sorting station, outfeed side with a 5 m long belt and programmable outfeed stations on both sides Minimum quantity lubrication Including from Kasto: 2 double-sided heavy-duty roller racks with 2 uprights, each with 4 levels System professionally stored Ready for collection Layout attached Transport, reassembly, and commissioning at buyer’s expense

Condition: used, Part suitable for: vans Guodpfx Aboyvt Dhsfof Price: On request VAT/taxation: VAT deductible Part number: A9062602301

Condition: used, Year of construction: 1977, cutting diameter 260 mm band length 480 mm stroke . mm total power requirement . kW Gjdpfeyycy Tsx Abfouf weight of the machine ca. . t dimensions of the machine ca. . m with contents see photos The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team

Condition: ready for operation (used), functionality: fully functional, overall weight: 2,920 kg, controller model: Siemens Simatic HMI, cutting diameter: 320 mm, cutting speed: 130,000 mm/min, saw band length: 6,300 mm, The machine was overhauled by Kasto in 2016! TECHNICAL DETAILS Cutting diameter: 320 mm Saw band length: 6,300 mm Cutting range: 420 x 320 mm Cutting speed: 20 – 130 m/min Material support height: 950 mm MACHINE DETAILS Control: Siemens Simatic HMI Total power requirement: 15 kW Dimensions & Weight Space requirement: approx. 6.35 x 6.76 x 2.41 m Machine weight: approx. 2,920 kg Pneumatic connection: 6 bar Guodpfx Ajywhdfjbfjf Coolant: 75 l Pump capacity: 40 l/min EQUIPMENT Infinitely variable feed rate Roller conveyor Chip conveyor Technical documentation The machine is supplied without robot and loading system. The machine must be reprogrammed by the customer for stand-alone operation.

Condition: used, KASTO PKS130 horizontal semi-automatic bandsaw. Gujdpfx Abjy E Nkijfjf

Condition: used, Year of construction: 2009, cutting diameter 15 - 560 mm Guodsvxwkfepfx Abfof 560 x 630 mm dimensions of saw-band 7.400 x 54 x 1,60 mm Control KASTO material feed - single 900 mm multiple feeding length max. 9.999 mm cutting length min. 6,00 mm sawing motor 5,50 kW cutting speed 13 - 127 m/min height of material-table 700 mm total power requirement 12,00 kW weight of the machine ca. 6,00 t dimensions of the machine ca. 3,70 x 2,50 x H2,50 m Automatic two-column band saw with KASTO Compact Control; frequency-controlled saw band drive; chip conveyor; infeed roller-conveyor electrically driven (6m), 3x roll-conveyor 1m and outfeed roller 2m; Machine can be inspected under power.

Condition: used, machine/vehicle number: 102 039 1024 07265, cutting area at 90° round: 245 mm cutting area at 90° flat: 220 x 240 mm cutting area in mitre at 45°: 150 mm saw blade measures: 400 x 31 x 2 mm stroke speeds: 55 - 155 /min electrical connection: 380 V, 1,1 kW space needed: 1200 x 650 x 1250 mm weight: 340 kg Gusdpocd Tmyjfx Abfsf

Condition: used, Year of construction: 2005, cutting diameter 1060 mm saw band length 11.430 x 80 x 1,6 mm cutting width 1,6 mm cutting range 1060x1260 mm Control CNC cutting speed 12-90 m/min power capacity 11 kW table load 20 t Cutting Length max. 6100 mm total power requirement 20 kW weight of the machine ca. 21,1 t Automatic feed length 2,100 - 6,100 mm The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale; Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. Godpjyqr Utjfx Abfjuf We look forward to your visit. Your Markus Hirsch Team