Used Konecranes Crossbeam for sale (349)

Condition: used, Year of construction: 1991, controller manufacturer: Siemens, controller model: 840 Dsl, _____ Description: Year of manuf. : 1991 Control : Siemens 840 Dsl Turning diam. : 1600 mm Turning length : 1800 mm In General: Year of manufacture:1991 / 2010 Control system retrofit:2010 Control system:Siemens 840 Dsl Circumferential diameter:2,000 mm Turning diameter:1,600 mm Turning height:1,800 mm Table / Faceplate: Technology:Gear-driven table Speed:315 rpm Power:105 kW Max. torque:50,000 Nm Faceplate:1,600 mm Max. table load:12,000 kg Tool carrier: Crossbeam travel (vertical):1,200 mm Chisel slide travel:1,500 mm Support travel (horizontal):2,300 (+/-1,150) mm Penetration diameter:340 mm Chisel slide cross-section:240 x 240 mm Equipment: Lrjdjy R Iwxopfx Aa Rsr Tool magazine:20 stations Chip removal:Chip conveyor Coolant supply:Coolant system with filter Tool measurement:Probe Set-up:Electronic handwheel Tool holders:Various tool holders Control system overhaul: Year of overhauling:2010 Technology:Siemens 840 Dsl NC control:Sinumerik NCU 710.2 Motors:X/Z-axis, ATC, :spindle Measuring systems:Direct scales X/Z, ROD encoder table Control panels:Machine control panel, ATC operator panel

Condition: used, SincoTec Type: Exciting Mot Resonance testing system POWER SWINGLY 20 kN The POWER SWINGLY BigTable resonance testing system is designed as a two-mass shaker. It consists of an oscillating head, which is excited by an unbalanced motor driven by a frequency-controlled asynchronous motor. The oscillating head is located in the upper part of the machine and generates the dynamic amplitude. The oscillating head is supported by pre-tensioned coil spring supports on the upper crossbeam and is guided centrally. The central load drive is located in the lower part of the machine and applies the static preload with the aid of a gear motor via a spindle drive. The test chamber is located above the clamping table and is bounded upwards by the adjustable crossbeam. The EXCITING MOT control system controls the testing system. The complete control electronics for the control system are housed in an industrial PC cabinet. The control cabinet is made of powder-coated steel sheet and meets protection class IP 50 according to EN 60529. Technical data: General data of the testing system: Overall height of the testing system 1840 to 2240 mm Height of the machine table 1030 mm Width of the testing system 800 mm Depth of the testing system 1500 mm Height of the test chamber max. 600 mm (without force sensor) Free column passage 550 mm Maximum force amplitude 10000 N Maximum total force ±20000 N Lrodpfx Aaezii Awo Rsr Maximum stroke ±5 mm Test frequency 30 to 110 Hz Accuracy of the measuring sensors min. Class 1 (according to DIN EN 10002-3) Weight of the testing system approx. 1880 kg Max. weight of the clamping device 150 kg General data of the control cabinet: Overall height of the control cabinet 1900 mm Height of the table top 1080 mm Width of the control cabinet 650 mm Depth of the control cabinet 700 mm Weight of the control cabinet 152 kg Color RAL 9006 (white aluminum), table top Midnight Conditions for the installation site: Space requirement 2.5 x 2.5 m Required ceiling height 2.8 m Floor load-bearing capacity 170 N/cm² Voltage supply 400 V / 50 Hz (clockwise rotating field) Connection plug CEE socket, s-pole, 16 A Fuse 16 A Connection and environmental conditions Mains conditions: Voltage 400 V three-phase current with PE conductor and protective earth, clockwise rotating field Voltage fluctuations < ± 10% Short-time voltage dips < 20 ms Limits for permanent disturbances Radio interference level A according to VDE0871 Frequency 50 Hz ± 1% Protective earth Grounding resistance < 0.3 Ω Model: POWER SWINGLY MOT Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: excellent (used), Year of construction: 2003, AZO Single Big-Bag Unloading System – Complete with Screening and Dust Extraction System --> vacuum conveying. - Year of manufacture: 2003 - Dimensions L x W x H: 1600 (+1400 mast) x 1600 x 5000 - Material: Stainless steel - Double vibration motors - Condition: Excellent! - Including hoisting motor. For sale: a robust and complete AZO single big-bag unloading system, suitable for the low-dust and efficient processing of powders, granules, and other bulk goods. This system is equipped with a heavy-duty crossbeam with a lifting capacity of 2,000 kg, allowing larger big bags to be handled easily. The included lifting beam with electric hoisting motor and remote control has a capacity of 1,250 kg, which ensures safe and user-friendly lifting and positioning of the big bags. Lodpfxszb I H Te Aa Rerr For optimal product quality, the system is equipped with a vibrating screen installation, supplied with two different screen decks, making the system flexible for various products and applications. The installation has 2 vibration motors, one on the big bag saddle and one in the vibrating screen itself for optimal vibration. Behind the screen is a dust extraction system with a dust filter, which effectively limits dust formation during unloading and maintains a clean working environment.

Condition: used, mileage: 519,563 km, power: 353 kW (479.95 HP), first registration: 08/2012, fuel type: diesel, overall weight: 32,000 kg, axle configuration: > 3 axles, color: yellow, gearing type: mechanical, emission class: euro5, total width: 2,550 mm, total height: 3,800 mm, Equipment: ABS, air conditioning, electronic stability program (ESP), had accident, parking heater, * Engine D2676LF07, 480 HP, EURO 5 SCR, 2300 Nm * ZF 16 S 252 OD manual transmission * 400 l fuel tank right side + 35 l AdBlue * Front axle VOG?09 / VP?09 driven * Parabolic springs front, 9.5 t * Water cooler & charge air cooler for high temperatures * Trapezoidal rear springs 16 t * Double rear axle installation ----Instruments & Cab* "Base-Line" instrument panel? * Adjustable steering wheel * MAN BrakeMatic * Brake shoe width RA 220 mm * Rear axles AP HPD?1382/1352 * Axle ratio i = 4.33 * Rear differential lock Lrjdpjzv Dhzsfx Aa Ror * Front differential lock with warning buzzer * Limited steering capability with FA?lock ----Wheels & Tyres* 11.75-22.5 rims on both front axles * 9.00-22.5 rims on both rear axles * Spare wheel 9.00-22.5 ----Cab & Comfort* Cab M (2240 mm wide, 1880 mm long) * Comfort seat covers * Driver comfort seat, air-suspended, ventilated, heated, with lumbar support * Passenger seat static * Internal-release front flap * Two additional vehicle keys * Washable interior door panels ----Engine & Auxiliary Components* Visco fan * Electronic engine management * PTO parameterization * PTO without flange * Tank guard * Fuel filter + filter heater ----Drive & Transmission* Engageable front-wheel drive * Transfer case G172 * Hydraulic/electric cab tilt device ----Heating & Air Conditioning* Eberspächer D4S auxiliary heater * Automatic air conditioning ----Air, Exhaust, Intake* Raised air intake * Fine dust and pollen filter * 1-cylinder air compressor * Raised exhaust right * Tailpipe manifold for raised exhaust ----Brakes & Safety* Engine brake EVBec * Flame start system * Single-plate clutch MFZ 430 * Raised axle vents * Foldable rear underrun guard * No front underrun guard * No side protection device * Three-part steel bumper * RINGFEDER 5050 A trailer coupling * Crossbeam for trailer coupling * Body mounting brackets * Spare wheel holder * Immobilizer * Emergency steering pump * Multifunction steering wheel * ABS * Drum brakes front and rear * 2-line brake coupling * Pneumatic parking brake front ----Access & Lighting* Step to body on fender * Entry lighting * Driver seat armrests * Fly screen * High construction * Air-suspended cab mounts * Note: Reduced comfort due to trapezoidal springs * Lockable tank and AdBlue caps * Headlight range adjustment * Work light left * Additional high beam and fog lights * H7 halogen twin headlights * Position and marker lights * Reading lights * Preparation for cargo area lighting * Central locking * Protective cover for tail light * Electric dual-tone horn ----Electrics & Controls* MAN Tronic on-board computer * Display languages German & English * TollCollect pre-installation * ABS trailer socket * 24V 7+7-pin trailer socket * 12V/24V sockets in cab * 2× 175 Ah batteries * Battery box * Alternator 28V 80A * Operating data display * Reversing alarm switchable * Electronic speed limiter 89 km/h * Cruise control * Boost pressure gauge * Car phone antenna * CB radio antenna * Radio MAN BasicLine * Radio pre-installation * 2 halogen roof beacons * Rotating beacons yellow ----Chassis & Stability* Stabilizer on both rear axles * Front axle stabilizer * Air dryer * Frost protection down to -27 °C ----Interior* Tinted windows * Rear wall of cab without window * Seat belt indicator * Manual sunroof * Electric windows * Sun blind * So

Condition: used, Year of construction: 1961, turning diameter Max. 4200 mm faceplate diameter 3700 mm turning height Max. 2600 mm Lredouddnvopfx Aa Rjr workpiece weight Max. 35 t Power 80 PS DIGITAL CONTROL DISPLAY Largest diameter with the crossbeam supports: 4200mm Largest turning diameter with side support: 3900mm Largest turning height above faceplate: 2500 Side support 1 vertical grinding ram: 1200mm stroke (out of operation) 1 turning ram: 1400mm stroke

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, Working area X: 2950 mm Working area Y: 1250 mm Workpiece passage Z: 160 mm Lrsdpfx Aajy Sgfwe Rjr 5-axis electrospindle, HSK 63F interface Vertical drilling spindles: 12 Horizontal drilling spindles X: 4 Horizontal drilling spindles Y: 2 Tool changer with approx. 12 positions Vacuum clamping system for "TV" crossbeams Laser positioning system for crossbeams and suction cups Vacuum pump 100 m³/h Pneumatically controlled lifting device CE safety system with bumper CNC control PC Office with integrated computer Programming system WOP Xilog Plus

Condition: used, mileage: 306,127 km, first registration: 10/2013, axle configuration: 4x4, total length: 10,600 mm, total width: 2,520 mm, total height: 300 mm, Year of construction: 2013, Equipment: ABS, EBS, air conditioning, crane, cruise control, electronic stability program (ESP), power assisted steering, traction control, - Stability control = Additional options and accessories = - Differential lock = Notes = DB ACTROS 4146 AK MP3 8X8 Crane Truck with Fassi 660 Loader Crane / Winch and Slewing Servo !! SINGLE TIRES !! • ALL-WHEEL drive! • Full leaf spring suspension! • EURO 5 • Telligent 16-speed transmission with clutch pedal • Air conditioning • Enhanced engine brake • Cruise control • Auxiliary heater • Hill start assist • 2 x differential locks • ABS deactivatable • Signal horn • Light bar with LED work lights • Rotating beacons • Multifunction steering wheel • Radio-CD player • Telephone • Tires: 395/85 R20 • Good tire tread! • Unladen weight: 22,544 kg • Perm. GVW: 32,000 kg (36,000 kg technically possible!) • Trailer hitch – jaw coupling • Perm. trailer load: 12,500 kg • 2-line trailer brake system • Overall vehicle length: 10,600 mm Superstructure: FASSI 660 XD Type F600A / 660 AXP 24 Lredswmn Tlopfx Aa Rjr • Remote control • 4 hydraulic extensions • Hydraulic ROTATOR • Hydraulic WINCH • 4-point outriggers • 10-ton lifting beam • Flatbed body MÜLLER with side walls Special equipment: 2-line trailer brake, trailer coupling: G 150, 24V / 15-pin trailer socket, brushed steel dashboard, Audio system: CD radio (Bluetooth incl. permanently installed phone), 220 Ah battery, air horn(s) on cab roof, Cab: reinforced cab suspension strut, Cab: movable cab entry, Cab: comfort suspension (1.8 Hz), construction vehicle filter, 100 A alternator, 400 l fuel tank, reinforced clutch, reinforced cooling, PTO MB 10C, programmable special module, revolving beacon left/right, heat insulated side windows, circuit breaker, Cab seats: comfort driver's seat, air-sprung incl. horizontal suspension, sun visor, sun blind side windows, driver and passenger door, power inverter 24V / 12V 15 A, reinforced rear axle stabilizer, 12 V socket, front bumper in steel, crossbeam for trailer coupling, additional thermal insulation, auxiliary water heater, transmission oil cooler Further equipment: 2nd steered front axle, EURO 5 emission standard, axle configuration: 8x8/4, front axle load 9.0 t, trailer coupling: towing coupling, vertical exhaust muffler behind cab, electric & heated exterior mirrors, steel roof hatch, rear axle differential lock, front axle differential lock, cab: S (short), suspension: leaf/leaf, electric windows, 16-speed transmission, rear axle H 7, 13 t, crown gear 300, hydraulic pump (Meiller pump - 6 pistons), body/superstructure: chassis for tipper (additional AV), body/superstructure: tipper, model revision from 06/2008, engine 12.0 l - 335 kW V6 diesel (OM 501 LA), engine brake with constant throttle, wheelbase 4800 mm, rear window, Telligent transmission, Telligent brake system with ABS, drum brakes front and rear axle, transfer case with differential lock, CB radio prep, phone/fax prep, immobilizer, heat insulating glazing, central locking Cab: single

Condition: excellent (used), Year of construction: 2022, For sale: Romer powder coating line. Equipment manufactured in 2022, lightly used. It was used for coating armored doors. The powder coating line consists of: 1. Oven (doors on both sides, 5 coating tracks) Model: Romer SW Internal dimensions: 3000 x 1500 x 2200 mm The oven does not have a heating burner, it was previously used with a gas burner. A gas or electric burner can be installed if required. Ljdpfx Aeyzw Hwea Rorr 2. Romer powder coating booth extraction wall Model: Romer KPO-3ZN 3. Conveyor system Overall dimensions: length 5900 mm x width 14000 mm, 2 trolleys with 5 tracks each. 4. Crossbeams with wheels (20 pcs.) Currently, the line is dismantled and ready for transport.

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 4,200 mm, feed length Y-axis: 1,600 mm, Homag Centateq E-310 / Profi BMG 310/42/16/F/V/K Prepared for one main spindle with gluing unit, mounted to the right of the gantry crossbeam. 5-axis main spindle, 12 kW Drilling head with 31 spindles: 21 vertical and 10 horizontal Grooving saw blade, tiltable 90° Blowing nozzle for 60 mm edge Circular tool magazine for 32 tools, HSKF63 Linear tool magazine with 8 positions Circular magazine with 10 positions Power Edge Pro Duo gluing unit Lsdpfxjx Irzcs Aa Rerr Safety control with bumper Chip conveyor Vacuum pump PowerTouch, WoodWop control software

Condition: used, functionality: fully functional, machine/vehicle number: WFDFLT34002026856, empty load weight: 5,592 kg, maximum load weight: 29,408 kg, overall weight: 35,000 kg, axle configuration: 3 axles, first registration: 05/2020, loading space length: 13,650 mm, loading space width: 2,480 mm, total length: 13,850 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385/65 R22,5", color: white, The images are archive images! The vehicle may be in use! Chassis: Saddle for trucking company Ledpfox Rq Slex Aa Rerr Fine-grained steel welded construction in reinforced Scandic design, saddle plate with replaceable 2" kingpin Outer frame slightly angled with "Load-Lock profile" for securing lashing straps Lashing rings for use in the "Load-Lock profile", 6 tons each, loose 24-ton, 2-speed support winch, single-sided operation, with straight lower part, without thrust compensation Free swivel radius to the support leg approx. 2200 mm, support leg dimension approx. 2350 mm 2 shims with holder Side impact protection, aluminum Under-run protection, galvanized steel Quarter panel fenders in front of and behind the axle unit with anti-spray flaps, only on the last axle 1 plastic toolbox, with drawer and insert, w=650 / h=520 / d=670 mm, can be locked with a padlock (lock not included) 1 pair of pole pockets recessed in the outer frame/floor at the very front, inner dimension 83 x 83 mm 2 steel poles, B=80/ D=80/ L=1200 mm, hot-dip galvanized Note: The pole pockets / insertion poles are not designed for the sole securing of long materials, pipes, etc. without lashing 4 pairs of lashing eyes, yellow marked Axles + Suspension 3 BPW drum brake axles "Axle/chassis laser-measured" to reduce tire wear and fuel consumption Air suspension Braking system 2-line compressed air braking system Color-coded lines for easy servicing Spring brake parking brake 2 fail-safe coupling heads at the front, without connecting line EBS brand Wabco Premium, electronic braking system with EBS socket at the front, without connecting cable, Wabco Premium incl. open CAN BUS for telematics Note: The trailer may only be pulled by towing vehicles that guarantee the effectiveness of the ABS! with raise and lower valve Vehicle - driving stability system Electrical system 24 Volt, multi-chamber lights in LED with resistor, yellow LED lighting on the side, license plate lighting in LED (Note! In certain towing vehicles, false diagnoses may occur, although the function is given) 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole fail-safe sockets at the front, without connecting cable Front panel / corner posts at the front 2 580 mm high, corner posts made of steel in a full volume design, release mechanism for side tarpaulin on the front panel "Crash-Blocker", at the bottom inside at approx. 140 mm height with steel ram protection Sliding battens Rows of wooden sliding battens Tarpaulin Tarpaulin with welded-in horizontal and vertical straps Tensioning devices made of stainless steel Floor Sieve plate approx. 30 mm thick, on longitudinal crossbeams for high point load capacity for forklift axle load up to max. 7100 kg Note: Floor deformation due to weather conditions possible (no guarantee)! Rear panel / corner posts at the rear Corner posts at the rear made of steel up to the lower edge of the roof, attachment for tarpaulin with round tube and tarpaulin tensioning ratchet Rear portal doors, 2-leaf with 2 internal swivel bar locks each Roof Sliding tarpaulin, rear lift that can be folded up, with tarpaulin that can be slid from back to front, tarpaulin color: white optimal rain gutter at the rear, at the top of the rear beam, above the doors Country of approval / plates Germany Type approval according to EC 2007/46 24/7 service hotline prepared for single-row license plate holder Contour marking with reflective tape according to ECE R 048, white on the side a

Condition: good (used), Year of construction: 2014, Frame from an AS/RS system, Stow, 6m / 12m / 18m, lightweight crossbeams, sheet metal struts – used: Price per meter of frame: €10.00 (net) ex works, disassembled, packaged, and loaded! * 6m frame: €60.00 * 12m frame: €120.00 * 18m frame: €180.00 Lightweight crossbeams, length approx. 2.36m = €4.00 (net) / piece! Ledezqz Uuepfx Aa Rsrr Sheet metal struts: €0.50 (net) / piece! If interested, the entire AS/RS system with 14 storage and retrieval machines is also for sale, price upon request. Manufacturer: Stow Type: Year of manufacture: 2014 Field load: max. 7,396 kg Frame depth: approx. 1.40 m Frame height 18m, joined at approx. 12m: i.e., the frames can also be used as 12m and 6m high frames without significant effort; additional feet may then need to be purchased. Frame width: approx. 9 cm Approx. 756 pieces, Lightweight crossbeams: 45,136 crossbeams Shelf load: max. 320 kg Struts: 180,544 struts Per shelf bay: 31 levels, 104 X-positions Condition: good to very good Available: from approx. Q4 / 2026 Location: Hamburg

Condition: used, Double-Girder Overhead Crane, KONE / Konecranes, 25/25 t (max. 30 t),Bridge crane, Used machine Manufacturer: KONE Cranes / Konecranes Drawing No. / Type Specification: HK 0049 - M / HK0049 - E01 Lifting capacity: 25/25 t (maximum tested lifting capacity: 30 t) Span profiles: 14 m Lifting height (travel): 15.5 m Condition: Used, in excellent and continuously maintained condition, ready for immediate operation Special feature: The crane comes with complete factory and periodic service documentation, including manuals. In 2023, it underwent an official Konecranes factory wire rope replacement (fully certified), and it has been upgraded with a modern, integrated Konecranes radio remote control and frequency inverter drive system. Overall dimensions: 14,318 mm (total bridge length) x 4,334 mm (total height) Technical and operating parameters: Crane classification (according to FEM): Steel structure: 2 / Machinery: 1 Am Rated lifting speed: 3.2 / 0.5 m/min Trolley travelling speed: 16 / 5 m/min Bridge travelling speed: 20 / 5 m/min Installed motor power (Lifting): 15 / 2.5 kW (30% ED, per hoisting drum) Installed motor power (Trolley): 2x 0.65 / 0.15 kW (40% ED) Installed motor power (Bridge): 2x 1.8 / 0.5 kW (40% ED) Supply voltage: 3x 380V, 50Hz + N Control voltage: 48V, 50 Hz Lrodpfxezi Ua Is Aa Ror Main fuse: 160 A Crane control: Upgraded Konecranes radio remote control for standard operation, plus an independent backup pendant control festooned along the bridge Power supply: Festoon cable system Environmental fire hazard classification: Class "C" Protection class: IP 55 (motors), IP 54 (control panel) Safety devices: Hoisting drums are equipped with electronic overload protection, limit switches for both bridge and trolley travel.

Condition: excellent (used), Year of construction: 2006, 5-axis mobile crossbeam numerical control work center. JOb LINX COMPACT. Lredpfswhlrzjx Aa Rsr Numerical Control: Siemens 840D. Year 2007 "CE", Machine works in 5 axes and has 2 electro-spindles: 1 Electro-spindle at 24000 rpm. 1 Electro-spindle at 8000 rpm. Working stroke: X-X1 axis: 6200 mm Y-axis: 3200 mm Z-axis: 1250 mm C-axis: 400 (+-200°) A-axis: 190° (-90 / + 100) Machine dismantled in accordance with the rules of the art. Machine in perfect mechanical/electronic condition. Possibility of loading on vehicles. Technical data in attachment.

Condition: used, empty load weight: 9,387 kg, maximum load weight: 26,613 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 11/2012, next inspection (TÜV): 01/2026, loading space length: 13,315 mm, loading space width: 2,490 mm, loading space height: 2,500 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 7,600 mm, color: black, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, cooling unit, Vehicle location: Bovenden, 3 axles, SCB axles (disc brakes), air suspension, first axle liftable, raise/lower function, ABS (anti-lock braking system), portal doors, pallet box, fire extinguisher box, supports, EBS. Wheelbase: 7,600 mm. Body: Carrier Vector 1850 refrigeration unit, 245-liter tank. Double-deck loading system with height-adjustable DOST System Type B1650 for 11x3 EURO pallets with 22 aluminum crossbeams. DIN EN 12642 Code XL, 3x SCB 9-ton axles with disc brakes, pallet box for 36 Euro pallets, chassis hot-dip galvanized. Leak test valid until 02/2026! ACCESSORY DETAILS WITHOUT GUARANTEE, subject to change, prior sale, and errors reserved! Lredpfxow Ihhdj Aa Rer

Condition: used, clear span: 3,300 mm, load per truss pair (max.): 1,400 kg, Technical data for the pallet racking traverse: Racking system: SSI Schäfer Type: PR 600 The scope of delivery includes: 01x pallet racking beam, used Material color: grey INP: 80 x 42 mm Beam type: TRV1-330-08-l Ledpfx Aajqxq Ice Rjrr Bracket: 5 HK (hooks) Clear width: 3,300 mm Max. load per pair of traverses 1,400 kg, with evenly distributed load 02x safety pins, used Version: sendzimir galvanized For securing the longitudinal beams against unintentional lifting General information about the item: This item is only available for collection. Any additional transport or shipment of this item is subject to additional costs, which can be requested from us separately depending on the place of delivery or scope of delivery.

Condition: good (used), machine/vehicle number: 940957, Year of construction: 1992, Technical data: - Load capacity: 4 t - Usable height: 690 mm - Overall height: 800 mm - Crossbeam support made of steel structural hollow profile: 140 x 140 mm - 3 load-bearing hooks - Grid spacing with 5 holes on the left and right: 200 mm - Overall length (approx.): 2100 mm Lrjdpfezqzubjx Aa Rsr - Overall width (approx.): 200 mm - Weight (approx.): 130 kg

Condition: not inspected (used), Mobile portal crane ABUS LPK Year of manufacture: 2011 Machine number: 220-090587 Condition: Uninspected Delivery terms: Free on truck Location: 21493 Elmenhorst-Lanken Availability: Immediately - by arrangement Net price: €2,500 Payment terms: Payment in advance - by bank transfer Internal No.: 174-5 Technical data: Crane bridge / crossbeam: approx. 3,300 mm Crane bridge profile height: approx. 240 mm Length of longitudinal beams: approx. 3,500 mm Length of travel / foot beams: approx. 1,980 mm Height of travel / foot beams incl. rollers: approx. 370 mm Lifting device: ABUS electric chain hoist Type: GM 6 2000.5-2 Load capacity: 2,000 kg Lifting speed: 0.30 / 3.00 m/min Lodpjzqfuxefx Aa Rsrr Power supply: 400 V / 50 Hz Equipment: Electrically movable chain hoist / load hook (left/right) Dimensions & weights: Installation dimensions L x W x H approx.: 3500 x 1500 x 1500 mm Weight approx.: 500 kg If you have any questions or would like to arrange a viewing, please do not hesitate to contact us! Additional information: ► Upon request, we can offer transport to the destination. ► The quoted price is net, plus VAT. ► The goods are sold with exclusion of all warranties. ► Technical data subject to change without notice. ► Subject to prior sale. ❗The goods are sold exclusively to business customers❗

Condition: used, Load turning device, load turning beam, load turning device, load beam, adjustable beam, crane beam, beam for pillar slewing crane, indoor crane, workstation crane, chain hoist -Crane cross member: adjustable, for the transport of different loads -Load capacity: 6500 kg -Hook spacing: min. 1460 mm / max. 2880 mm Lodeg Dvyqepfx Aa Rjrr -Steel rope: O 22 mm, length 1580 mm -Dimensions: 3025/190 / H945 mm -Net weight: 230 kg

Condition: excellent (used), 25.80 Meter Nagy PB-80 Pallet Rack Manufacturer: Nagy Type: PB-80 Rack Length: 25,800 mm Upright Height: approx. 10,300 mm Upright Depth: approx. 1,100 mm Upright Type: PB-80 Profile: 80 x 60 mm Layout: bolted Upright Finish: galvanized Clear Bay Width: 3,600 mm Crossbeam: 3,600 x 120 x 45 mm Crossbeam Finish: blue painted (RAL 5015) Number of Bays: 7 Number of Levels: 7 including floor space Max. Pallet Weight: 500 kg Maximum Bay Load: 2,000 kg Maximum Bay Load: 12,000 kg Pallet Positions: 196 Scope of Delivery 8 x Uprights 10,300 x 1,100 mm galvanized 84 x crossbeams 3600 x 120 x 45 mm blue Technical Summary Uprights: 10300 x 1100 mm, 80 x 60 mm profile, galvanized, bolted truss construction. Crossbeams: 3600 x 120 x 45 mm, blue (RAL 5010), 4 Euro pallets per level. Material & Construction: The galvanized surface provides long-lasting corrosion protection. Unlike welded frames, the bolted truss construction (diagonal and transverse braces) allows for easy replacement of individual components in case of damage (e.g., from forklift impacts). Lrodpfx Aaeyvrxks Rsr Profile: The 80 x 60 mm profile dimension is typical for medium to heavy-duty pallet rack uprights to ensure the necessary buckling stiffness at heights exceeding 10 meters. With standard pallet heights (1.20 m), you can install 6 beam levels in the 10.3 m high racking system. Together with the floor-level storage spaces, this results in 7 storage levels, which, with 4 pallets per level, provides a total of 196 pallet spaces. "Everything from a single source: We would be happy to offer you suitable bank financing for your project." komplett-konzept.leasingo.de You can find more items – new and used – in our shop! International shipping costs on request!

Condition: used, total length: 11,300 mm, total height: 4,000 mm, shelf height: 4,000 mm, support length: 2,700 mm, This package includes: 5 x uprights, 4000mm x 1,100m (blue) 24 x crossbeams, 2,700mm (orange) 48 x locking pins 5 x U-shaped impact protection 36 x shelf inserts Available from our Neuwied location. Creates a shelving row with 4 bays, each with 3 levels + floor space = a total of 48 pallet spaces (1000kg / pallet) Additional uprights and crossbeams are available for this system. Please contact us. Manufacturer: Stow Ljdpfxszmdy Se Aa Rerr Condition: used, good condition Height: 4,000 mm Length: approx. 11.3 m Shelf depth: 1,100 mm Bracing: bolted Crossbeam length: 2,700 mm Shelf load: 3000 kg Bay load: 9000 kg Pallet spaces: 48 Accessories such as: Floor fastening Connectors Load warning signs Impact protection Guardrails Grating Back panel grating Deep shelf supports Barrier rails and much more... Just ask us! “Benefit from over 20 years of industry experience – we provide competent and personalized advice as your experienced specialist retailer for new and used shelving systems.” Sales and delivery conditions (B2B) - Prices & Logistics: All prices are quoted net from our location. Express delivery via our own fleet is possible upon individual agreement. - Offer status: All offers are non-binding. Subject to prior sale. - Reservation of ownership: The goods remain our unrestricted property until full payment (no disposal or processing permitted). - Warranty: Exclusive distribution to commercial enterprises (§ 14 BGB). For used and IIa goods, liability for defects in materials is excluded. For new goods, the respective manufacturer's warranties apply.

Condition: used, swing diameter 2000 mm turning height 1800 mm Control Siemens Sinumerik 840 Dsl turning speeds range 2,8-315 U/min Ljdpfx Aajy Dvlqj Rjrr cross rail adjustment - vertical 1200 mm cross rail adjustment - horizontal +/- 1150 mm 1500 mm bit feeder section 240 x 240 mm Minimum immersion diameter 340 mm cutting capacity 50 kN max. torque on the faceplate 50000 Nm speed range step 1 2,8 - 80 U/min speed range step 2 12 - 315 U/min Max. clamping weight 12000 Kg power capacity faceplate 105 kW weight of the machine ca. 33 t dimensions of the machine ca. 10 x 5 x 6,5 m Further technical data: - Feed range of three-phase servo motors: 1–3000 mm/min; 0.01–50 mm/rev - Crossbeam travel speed: 425 mm/min Features/Accessories - Increased turning height (+600 mm) - Z-axis extended to 1500 mm - Magazine capacity: 20 positions - Magazine type: disc magazine - Max. tool length: 525 mm - Chip conveyor - Workpiece measurement - Renishaw probe - Coolant tank capacity: approx. 2000 litres - Coolant pump flow rate: 60 litres/min at 2 bar Overhaul: - Extensively overhauled in 2012 by Siemens Industry Munich - Items overhauled included: control system, cabling, motors, measuring systems, etc. - Further information can be found in the PDF

Condition: used, mileage: 100 km, power: 125 kW (169.95 HP), color: blue, gearing type: mechanical, Year of construction: 2026, Equipment: ABS, air conditioning, central locking, power assisted steering, - To ensure that you receive the best possible advice from us, we kindly request that you schedule an appointment. Mr. Kiel will be happy to assist you. Tel: Henschel flatbed truck with aluminum sideboards Lodpfx Aaezr Twdo Rjrr Ladder support behind the cab Dimensions approx. 4,300 x 2,020 mm BA3 Active Brake Assist, C6L Multifunction steering wheel, C6L Multifunction steering wheel, C71 Underrun protection device according to EC regulations, C72 Bumper and corner elements paintable, CB8 Stabilization Level II, CL1 Steering wheel adjustable in inclination and height, CM9 Painted components, pure white MB 9678, CN2 Radiator grille frame in vehicle color, CW2 Omission of vehicle lowering, E07 Hill start assist, E1D digital radio (DAB), E1E Navigation, E1U USB socket 5 V, E2A Take-off for ABH special signals in the cockpit, E3J Pre-installation for switch panel, E57 Electrical system for trailer socket, E7M MBUX multimedia system, ED4 Fleece battery 12 V 92 Ah, EK1 Terminal block for electrical connection, ES0 Jump start assistance Contact, EW6 Pre-installation for Remote Services Plus, EY2 Live Traffic Information, EY5 Mercedes-Benz emergency call system, EY6 Breakdown management, F49 Heated windshield, F68 Heated and electrically adjustable exterior mirrors, FF5 Storage compartment above the windshield, FG8 Front cup holder, FHS CAB, FJ1 Folding cover for storage compartment, FJ4 Storage compartment under the cockpit, FJ5 Folding cover for storage compartments left and right, FQ6 Lockable compartment in storage space above the windshield, FR7 PRE-INSTALLATION ELECTRICAL SYSTEM REVERSING ASSIST, FS1 Mirror holder, extended, GD8 6-speed manual transmission ECO Gear 360, H1I Wide-angle nozzles in the instrument panel, H21 Heat-reflective glass with band filter on the windshield, HH9 SEMI-AUTOMATICALLY REGULATED CLIMATE CONTROL SYSTEM TEMPMATIC, IF3 Chassis with cab, IR6 Wheelbase 4325 mm, overhang 1615 mm, IT4 3.5-ton truck, J10 Speedometer km/h, J1V Pre-installation for blind spot assist for body builders, J55 Belt warning system for passenger seat, J58 Belt warning system for driver's seat, J65 Outside temperature display, JA8 Crosswind assist, JA9 Traffic sign assist, JB4 Active lane keeping assist, JF1 Rain sensor, JG0 Gear shift indicator, JH3 Communication module (LTE) for digital services, JI7 Start-up mileage maintenance interval 60,000 km, JK5 Instrument cluster with color display, JW8 ATTENTION ASSIST, KB7 Main tank 93 liters, L LEFT-HAND DRIVE, L07 Outline lights, L72 Electrical system for external superstructure, L76 Rear light wiring harness extended, L94 Omission of parking light, LA2 Headlamp assistant, LB1 Lateral marker lights, LE1 Adaptive brake light, LV6 Pre-installation for electrical system for 3rd brake light, M60 Generator 14 V / 250 A, MJ8 ECO start-stop function, MS1 Cruise control, MT5 EMISSIONS CLASS EURO 6e RDE5 N1, MU5 OM 654 DE 20 LA 125 kW (170 hp) 3800/min, O7L Rear blind spot radar, X to rear axle 300 +/-100 mm, O7P Rear blind spot radar, additional X to rear axle +1000 mm, O94 WIDTH OF SUPERSTRUCTURE OUTER EDGE 2150 MM +/- 50 MM, P47 Front mud flaps, Q11 Longitudinal beam reinforcement, Q18 Rear crossbeam screwed on, RH2 Tires 235/65 R16 C, RM7 Summer tires, RS3 Steel wheels 6.5 J x 16, RY2 Tire pressure monitoring system on front and rear axle, wireless, S23 Passenger seat, double seat, S28 Armrest, driver's and passenger's door, S87 Driver's seat box, low, SA5 Airbag driver, SA6 Airbag passenger, SB3 Suspension seat, comfor

Condition: used, maximum load weight: 1,205 kg, overall weight: 2,000 kg, axle configuration: 2 axles, first registration: 03/2026, loading space length: 2,940 mm, loading space width: 1,570 mm, loading space height: 1,840 mm, total width: 2,050 mm, total height: 2,405 mm, A43 GW26PGA00760, Box trailer manufactured by STEMA, model STPK .2.P18.2, P-Box, WSETK0P04 Gross weight: 2,000 kg, low loader, 2 wing doors, 3.05 m x 1.55 m x 1.95 m ...and much more. Box: - Ventilation slots for optimal air circulation - 15 mm thick plywood panels made from multi-layer wood, white PVC coated - Aluminium profiles with variable lashing points - Door configuration: wing doors - Door hinges, galvanized Ljdpfxsyqdtnj Aa Rjrr - Lockable rod locking system - Manoeuvring handles Loading area and floor: - Continuous, anti-slip and waterproof phenolic resin-coated plywood floor - 12 mm thick - Additional crossbeams to support the floor Lighting system: - 13-pin plug, EC specification - Modern multifunctional lighting - With rear fog lamp - With reversing light - Marker lights Subject to errors and prior sale.

Condition: used, Year of construction: 2026, color: grey-black, empty load weight: 3 kg, first registration: 05/2026, fuel type: gasoline, gearing type: mechanical, TITLE: USED OPEN-TOP ROLL-OFF CONTAINER FOR BULKY WASTE WITH REAR OPENING, TWO SIDE-HINGED DOORS, 200 MM BEAMS, NEW ROLLER CARRIER CROSSBEAM, AND PARTIALLY RECONDITIONED FLOOR REF: 26-U-61 TYPE: Bulky waste NEW: No LID: No OPENING: Rear, two side-hinged doors DIMENSIONS TOTAL EXTERNAL LENGTH: 6.50 m + 0.20 m EXTERNAL WIDTH OF BODY: 2.50 m FRONT SIDE HEIGHT (INTERNAL / EXTERNAL): 2.20 m / 2.40 m REAR SIDE HEIGHT (INTERNAL / EXTERNAL): 2.20 m / 2.40 m SIDE PANEL HEIGHT (INTERNAL / EXTERNAL): 2.20 m / 2.40 m Lodpfoy Sqfzsx Aa Rorr CAPACITY: 33 m³ WEIGHT: 3,080 kg FLOOR: 4 + 4 mm SIDE WALLS: 3 mm COLOUR: Green All information is provided subject to errors and/or omissions. Displayed prices do not include VAT. Please contact our sales department for updated pricing and conditions. For further information: Loris: +39 348 477 3001 URL: #thespecialistsofrolloff AURORA ROLL-OFFS Specializing in the sale and purchase of industrial and commercial vehicles, mainly in the waste management sector. Experts in trucks, trailers, and roll-off equipment. Over 50 trucks and more than 150 bins and containers, with and without roll-off cranes, available for immediate delivery. E.&O.E. Due to the high volume of listings and details, Aurora invites you to confirm the accuracy of the information with our sales team.

Condition: excellent (used), functionality: fully functional, Year of construction: 2004, Brand : Luna Type : 8835 18/05 Lredpjh Ngd Rsfx Aa Ror Year of construction: 2004 Capacity : 1890x0.5 (250 N/mm2) Mains voltage : 3x400V / 3x230V Roll diameter : Ø 35 mm Motors : 0.75 kW max. working speed : 7.1 m/min Machine weight : 900 kg Art.no. : 6812 Complete, well-functioning CNC plate roller for rolling thin material up to 0.5 mm plate (250 N/mm2). Especially suitable for rolling aluminum sheet. Previously used for rolling lampshades. Machine description Luna: “The 8835 is a roll bending machine for the production of small radius louvres and reflectors to meet the demands of the latest small diameter light tubes. The machine is designed with three independant bottom rolls to reduce prodcution time to a minimum. All rolls run in adjustable support bearings to permit easy roll adjustment for materials of different hardness and thickness. The top roll crowning is carried out by means of a crossbeam, which tilts to make room for the bent part. All rolls are hardened and chromium-plated with polished surfaces to avoid marking. The control system allows the programming of constant radius parts as well as parabolic shapes. 100 programs can be stored. ” Full documentation available: - Operating manual (in English) - Electrical Schematics