Used Kpz-1 + Profispray V for sale (93,703)

Condition: new, Safety valve for presses IMI HERION / NORGREN PSV valve, twin valve, directional control valve Type: XSz 10 V ID No. 2492982 Serial No. 2608 Equivalent to order no.: 2492951 Pressure: 3 to 10 bar Compressed air connection thread (A)+(B)+(P)+(S): 1/2" Compressed air outlet (R): flange connection Supply voltage: 2x 24 Volt (DC) - Base plate hole spacing 115 x 63 mm, 4x mounting holes Ø 6.5 mm - Equipped with silencer on compressed air outlet (R) Valve body dimensions L x W x H: 105 x 90 x 220 mm Dimensions with silencer L x W x H: 180 x 165 x 220 mm Weight: 3.0 kg New, unused, from stock Ibsdew T U A Sopfx An Isc

Condition: used, Year of construction: 2002, grinding diameter 450 mm grinding length 1500 mm centre height 225 mm Control FAGOR EQUIPEMENT - T1: grinding wheel diameter 500 mm - T2: grinding wheel diameter 400 mm - T6: HF Fischer spindle MFV or MFZ 1224/1242/1260 - T7: HF Fischer spindle MFV or MFZ 1224/1242/1260 - Marposs tool measurement - active longitudinal positioning - Elaso GAP-control on T1 and T2 contactless integrated in the control surface - Elaso GAP internal grinding with fluid sensor for T6 and T7 - semi-automatic balancing by Elaso integrated in the control surface for T1/T2 - tailstock hydraulic with fine adjustment +/- 150 microns - dresser on workpiece spindle side table mounted - dresser on tailstock side table mounted - dresser on upper table - new service- and userfriendly housing SPECIAL EQUPEMENT: Workhead with direct drive - strongly recommended for non-circular grinding - workpiece weight flying max. 75kg - workpiece weight between centres 150kg - water-cooled B-axis with direct drive - center height 225 mm - extremely torsionally stiff - highly accurate positioning - resolution ° - water-cooled Hydrostatic ball screw - x-axis - wear-free, as there is no contact during operation - no loss of precision, even during long-term use at full load and maximum speed - no friction at low speeds - no friction force backlash when the direction of rotation changes - translates even the smallest rotational movements - no stick-slip effect even at low speeds - no fluctuations in frictional torque due to ball circulation - higher axial stiffness compared to ball screws - significant improvement in damping, resulting in better workpiece surface finish and tool life - no oscillations due to ball circulation - also suitable for high speeds and accelerations - cost-effective alternative to the linear motor with greater precision and significantly lower heat generation - significantly less power dissipation and, as a result, no problems with swarf on permanent magnets New hydraulic unit - optimized temperature control (chiller) - Energy-saving Only one pump controlled by VFD - Pressure monitoring - monitoring of the hydrostatic oil for water content. (Damage to the bellows is recognised and detected prematurely) -fine adjustment +/- 150 microns Paper belt filter 375l – alternative 480l Grinding mist extraction system – emulsion MECHANICAL OVERHAUL -complete machine according to Kellenberger protocoll -new painting ELECTRICAL OVERHAUL - new modern Fagor CNC with BEMA HMI - new electric cabinet - new digital drive technology - replacement of all electrical cables, switches etc. - new absolute external scales in x- and z-axis - new absolute encoder (B-axis) Grinding software BEMA-Standard: - workpiece zeroing - grinding wheel zeroing - dressing diamond measuring - corrections - external and internal surface grinding - external and internal angle grinding Ibjdpfouxfu Nex An Ioc (turning of the b-axis, dressing with straight wheel) - external and internal radius grinding (radius dressed on wheel) - semi-automatic traverse grinding - workpiece zeroing - 2 dressing diamonds - 1 dressing blade - dressing roll - 3 flat dresser - corrections - Z-position measurement - GAP control Optional grinding cycles at no extra charge: Profile plunge grinding: - external and internal profile plunge grinding with profile wheel Pr...

Condition: good (used), mileage: 782,543 km, first registration: 02/1992, fuel type: diesel, tire size: 315/80R22.5, axle configuration: 4x2, wheelbase: 3,600 mm, fuel: diesel, color: black, driver cabin: sleeper cab, gearing type: mechanical, suspension: steel-air, total length: 5,900 mm, total width: 2,550 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 1992, = Additional Options and Accessories = - Aluminum fuel tank - Leaf spring suspension - Air suspension Ibjdpfx Ajuxyc Ijn Iec - Sleeper cab - Sun visor = Notes = Volvo F16.500 Globetrotter 4x2 - Fully renovated - Volvo Demo colors - New paint - Perfect condition Year of Manufacture: 28-02-1992 Mileage: 782,543 km VIN: YV2H3A6A8NA369308 License Plate: 76-BTB-7 Volvo in perfect condition New paint - Demo colors from Volvo Interior like new Air suspension 3.60 m wheelbase Telma retarder Cruise control Double bed Electric windows Air horn Extra lights Visit our website for all photos and information: / = Further Information = Technical Information Number of cylinders: 6 Engine displacement: 16,115 cc Transmission: Volvo, manual transmission Front axle: Tire size: 315/80R22.5; Max. axle load: 7,500 kg; Tire tread depth left: 70%; Tire tread depth right: 70%; Suspension: Leaf spring suspension Rear axle: Tire size: 295/80R22.5; Dual tires; Max. axle load: 11,500 kg; Tire tread depth left inner: 70%; Tire tread depth left outer: 70%; Tire tread depth right inner: 70%; Tire tread depth right outer: 70%; Suspension: Air suspension Weights Unladen weight: 8,000 kg Payload: 11,000 kg GVWR: 19,000 kg Functional Body manufacturer: Volvo Environmental Emissions class: Euro 0 Condition Technical condition: good Optical condition: good Identification License plate: 76-BTB-7

Year of construction: 2025, condition: new, Sample system for filling wet coleslaws, sauerkraut, red cabbage into prefabricated bags including vacuuming of the bags. Rotary type volume dosing station with the special feature that the product is pressed into the bag by a piston cylinder. The filled bags are then transferred to the rotating vacuum and sealing station. 10 individual chamber vacuumers - particularly suitable for products containing high liquid - ensure an excellent vacuuming result. Thermal transfer printer and product infeed unit included. PLC controlled, operation via touch screen. Suitable for a wide range of pouches such as composite and single-layer aluminium, PE, BOPP and PP films, paper, etc. - Specifications: Filling range: 20-1000g; max. number of machine cycles in neutral: 80 cycles/min; bag dimensions: W(80-160)xL(80-240)mm; dimensions of the machine LxWxH: 2100x1400x1700mm. Please note: This is only a sample system. The dosing unit is selected according to the product requirements. Specifications may differ and depend on the final layout. Ibjdpfjv Nlnmsx An Iec Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, mileage: 757,000 km, power: 338 kW (459.55 HP), first registration: 05/2019, fuel type: diesel, overall weight: 18,600 kg, axle configuration: 2 axles, next inspection (TÜV): 05/2025, brakes: retarder, color: blue, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, navigation system, parking heater, soot filter, MAN TGX 18.460 LL. EURO 6 with height-adjustable fifth wheel coupling, ideal for Low Liner and standard applications. Spacious cab with 1 bunk. Wheelbase 3.60 m. Automatic climate control, distance warning system, 2x aluminum fuel tanks, AdBlue, spoiler, sun visor, horn, 315/60R22.5 tires. Comfort seat, seat heating, armrest, multi-function steering wheel, cruise control, electric mirrors, central locking, immobilizer, blind spot camera, differential lock, RIO, sunroof, radio + navigation, cooler box, auxiliary heater, fully air-suspended. Detailed view of the vehicle // Detailed walkaround of the car: ?v=syAXl9FXWac =====German registration + 1 owner===== ==Daily purchase of commercial vehicles, as well as trade-ins possible== . ===New batteries + new clutch=== Iedpfx Aev S Rmtsn Iobc Price: 17,900 EUR net.

Condition: good (used), Year of construction: 2011, functionality: fully functional, machine/vehicle number: 179056920, Technical characteristics: Work Area - Chuck diameter: 600 mm - Max. workpiece diameter/height: 450 / 400 mm - Distance spindle nose to tailstock origin: 639 mm - X1/X2 axis stroke (effective travel): 335/289 mm / Rapid traverse X: 30 m/min - Z1/Z2 axis stroke: 560/494 mm / Rapid traverse Z: 30 m/min - Standard fully enclosed cabin with automatic door opening – manual or automatic loading possible Main Spindle - Spindle interface according to DIN 55026: Size A6 - Max. spindle speed: 4,500 rpm - Spindle power at 100%/40% duty cycle: 23/18 kW - Spindle torque at 100%/40% duty cycle: 146/115 Nm Tailstock - Interface: MK4 - Clamping force: 850 daN - Clamping stroke: 200 mm Turret Configuration X1/Z1: Tool Turret with Driven Tools - Tool mounts cylindrical shank to DIN 69880: 8 × VDI 40 - Max. tool length: 130 mm - Number of stations: 8 - Max. turret speed: 4,500 rpm - Max. torque at 10% duty cycle: 27 Nm; at 100%: 14 Nm Turret Configuration X2/Z2: Tool Holder with Driven Tools - X-HOT unit for polygon turning, max. eccentricity (stroke): 8 mm - X-HOT tool holder interface: HSK 32S Electrical Equipment - Operating voltage: 400 V, 100 A - Connected load: 37 kVA Dimensions - Overall dimensions: Length 3,000 mm (6,477 mm with chip conveyor), Width 3,000 mm, Height 3,650 mm - Weight: 11,000 kg Main Features and Capabilities: Ijdpfjxwmf Sox An Ijbc - Vertical design: Optimum chip disposal, manual or automatic loading/unloading - Control: Siemens 840D for NC1 and NC2 - High precision: Positioning accuracy X/Z axes ±0.002 mm (Heidenhain absolute linear scales) - Powerful main spindle with wide speed range - Driven tools expand application range to include drilling and milling - Tool life monitoring - Chip conveyor coolant: Knoll - Coolant filtration unit up to 40 bar: Knoll FKA/1400 - Part detection system with low air pressure sensor - AUTOMATION INFRASTRUCTURE FOR ROBOT INSTALLED - Fully enclosed work area, work light included - Documentation: Available electronically and as printed manual Machine status: In working condition.

Condition: used, mileage: 118,264 km, power: 85 kW (115.57 HP), first registration: 03/2021, fuel type: diesel, overall weight: 1,980 kg, next inspection (TÜV): 03/2028, fuel: diesel, color: white, driver cabin: other, gearing type: mechanical, emission class: none, suspension: other, number of seats: 3, total length: 4,321 mm, construction height: 1,820 mm, Equipment: ABS, air conditioning, airbag, central locking, electronic stability program (ESP), navigation system, onboard computer, sliding door, soot filter, trailer coupling, * Appointment for consultation and test drive = shorter waiting times: * Time is valuable, and you shouldn't waste it waiting. Therefore, we kindly ask you to arrange a consultation or test drive appointment by phone. * Service booklet * Non-smoker TRANSMISSION / CHASSIS * Engine: 1.5 L - 85 kW CDI CAT * Panel van * 6-speed manual transmission APPEARANCE * Exterior color: arctic white * Side protection moldings LIGHTING & VISIBILITY * Daytime running lights * Aero windshield wipers (flat-blade wipers) * Automatic headlights * Third brake light * Exterior mirrors, electrically adjustable and heated, both sides * Side indicators front ENTERTAINMENT * Audio navigation system * Radio pre-installation ASSISTANCE SYSTEMS AND SAFETY * Parktronic system (rear) * Start/stop system * Brake assist * Traction control (ASR) * Hill start assist * Omission of thorax sidebags and windowbags * Seat belt warning for driver seat * Anti-lock braking system (ABS) * Electronic Stability Program (ESP) COMFORT * Auxiliary heater * Double passenger seat * Electric additional heater * Black 'Lima' fabric * Roof lining up to B-pillar * Floor and sidewall wood trim * Basic interior trim * Sliding door, load/passenger compartment, right side * Rear wing doors without windows (opening angle 180 degrees) * Air conditioning * Glove compartment, passenger side, closed * Heat insulating glazing * 12V power socket Ijdpfjyv Tmcex An Iobc * Cabin air filter: pollen filter OTHER * Tow bar * Load compartment partition * German technical specifications * Signs / documentation in German * Load/passenger compartment trim: plywood * Body/build: panel van * Lockable fuel cap * Standard fuelling * Wooden floor cargo compartment * BlueEfficiency package * Storage compartment above windshield * Low-emission according to Euro 6d-TEMP emissions standard * Soot particle filter * Outside temperature display * Load securing / lashing points * Luggage compartment lighting * 1,980 kg weight variant * Registered as commercial vehicle (truck) * Version: panel van * And much more * All information provided without guarantee. The details do not constitute an agreed quality. Subject to error and prior sale. * Our services: * Financing available, including with no down payment * Registration service * Trade-in of your current car possible * Delivery available * Tire service, winter and summer tires available at extra cost * We speak several languages: * English, French, Spanish, Italian, Russian, Turkish, Serbian, Czech, Croatian, Bosnian, Macedonian, Slovenian, Bulgarian, Slovak * We look forward to your visit!

Condition: excellent (used), mileage: 60 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 3,590 mm, first registration: 11/2024, emission class: euro6, color: silver, driver cabin: day cab, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, power assisted steering, sliding door, traction control, = Additional Options and Accessories = - Apple CarPlay - Heated exterior mirrors - Electric windows - Electrically adjustable exterior mirrors - Euro 6 emission standard - Driver airbag - Remote central locking - Cruise control - Height-adjustable driver's seat - Height-adjustable steering wheel - Wireless charging function for mobile phones - Air conditioning - LED daytime running lights - Metallic paint - Front center armrest - Radio DAB MP3 Bluetooth 4.0 - Spare wheel - Sliding side door - Immobilizer - Two rear doors - Partition - Partition without window Ibedpfx Aoywwvken Ioc = Additional Information = General Information Number of doors: 5 Cabin: single License plate: V-91-LFD Technical Information Number of cylinders: 4 Engine displacement: 1,997 cc Transmission: 6 gears, manual Front axle: Max. axle load: 1950 kg; steered Maximum rear axle load: 2000 kg Dimensions Length/Height: L4H3 Height: 250 cm Weights Unladen weight: 2,028 kg Payload: 1,472 kg GVW: 3,500 kg Max. towing capacity: 2,500 kg (unbraked 750 kg) Interior Interior: gray Consumption Average fuel consumption: 5.9 l/100km Fuel consumption in urban areas: 5.6 l/100km Fuel consumption outside urban areas: 6.1 l/100km Maintenance APK (Technical Inspection): valid until 11/2027 Condition Technical condition: very good Optical condition: very good Number of keys: 2 (2 remote controls)

Condition: excellent (used), mileage: 90 km, power: 125 kW (169.95 HP), fuel type: diesel, gearing type: mechanical, axle configuration: 4x2, wheelbase: 4,220 mm, first registration: 11/2024, emission class: euro6, color: light blue, driver cabin: day cab, number of seats: 3, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, cruise control, immobilizer system, power assisted steering, sliding door, traction control, = Additional options and accessories = Isdeywx A Ejpfx An Ijbc - Apple CarPlay - Automatic low beam headlights - Heated exterior mirrors - Co-driver's bench seat - Electric windows - Electrically adjustable exterior mirrors - Euro 6 emission standard - Driver airbag - Remote central locking - Cruise control - Height-adjustable driver's seat - Height-adjustable steering wheel - Wireless charging function for mobile phones - Air conditioning - LED daytime running lights - Metallic paint - Front center armrest - Radio DAB MP3 Bluetooth 4.0 - Rain sensor - Spare wheel - Sliding side door - Immobilizer - Two rear doors - Partition - Partition without window = Additional information = General information Number of doors: 5 Cab: single License plate: V-34-LFG Technical information Number of cylinders: 4 Engine displacement: 1,997 cc Transmission: 6 gears, manual transmission Front axle: Max. axle load: 1950 kg; steered Maximum rear axle load: 2000 kg Dimensions Length/Height: L4H3 Height: 250 cm Weights Unladen weight: 2,100 kg Payload: 1,400 kg GVWR: 3,500 kg Max. towing capacity: 2,500 kg (unbraked 750 kg) Interior Interior: gray Consumption Average fuel consumption: 5.9 l/100km Fuel consumption in urban areas: 5.6 l/100km Fuel consumption in extra-urban areas: 6.1 l/100km Maintenance APK (Technical Inspection): valid until 11.2027 Condition Technical condition: very good Optical condition: very good Number of keys: 2 (2 remote controls)

Condition: used, mileage: 189 km, power: 129 kW (175.39 HP), first registration: 01/2024, fuel type: diesel, overall weight: 5,500 kg, color: grey, gearing type: automatic, emission class: euro6, number of seats: 2, total width: 2,169 mm, total height: 2,960 mm, loading space length: 3,540 mm, loading space height: 1,900 mm, Equipment: ABS, air conditioning, all wheel drive, central locking, electronic stability program (ESP), navigation system, soot filter, Subject to errors and prior sale! Internal number: 0881. GW2302727460----EQUIPMENT * All-wheel drive with 4-hole auxiliary drive (350NM) * Storage: Central storage compartment - with USB charging connection * Airbag for front passenger with belt tensioner * Alarm system - with central locking and remote control separate for driver's cab and cargo area. * Trailer coupling: ball head * 13-pin trailer socket (12 V) * Key: Third vehicle key with remote control * No partition - without protective grille * Body manufacturer interface with extension module & CAN interface - CAN-Open * Air conditioning in the driver's cab with automatic climate control as well as pollen filter and outside temperature display including air conditioning compressor 170cm³ Ibjdpfxevvqfdj An Iec * Comfort dashboard * Charging light - outside above rear door * Light and rain sensor * Package: Smoker - ashtray and cigarette lighter * Radio: Radio HI-Connect +Navigation - DAB radio with 7" color display - TomTom car and truck navigation - Driving style analysis - Voice recognition - Apple CarPlay - Android Auto * Spare wheel on steel rim * Rear view camera and charging light outside above rear doors * Seat: Luxury seat for passenger - with armrest and lumbar support - adjustable in height, inclination and length, hydraulically suspended * Seat: Luxury seat for Driver - with armrest and lumbar support - adjustable in height, inclination and length, hydraulically suspended * Standing height in the driver's cab (1900mm) * Cruise control * Preparation for 3rd DIN compartment * Heated windshield in the area of the windshield wiper support. * AdBlue tank 20l * Airbag for driver with belt tensioner * Outside mirrors electrically adjustable and heated * Battery 110 Ah * On-board computer * Third brake light * Diesel particle filter * Digital EC control device DTCO 4.0 * Torsion bar suspension (front axle load increase) * Tachometer * First aid kit * Electric windows, left and right * Generator Eco-Smart 3080 W 14 V x 220 A * Speed limiter * Gearbox: 8-speed automatic * Rear door * Fuel tank 70 l * Crankcase ventilation * Paintwork: Solid paintwork * Manual headlight range adjustment * Model designation on both sides * Upholstery: Fabric * Sliding door on the right side * Power steering * Height-adjustable seat belts at the front * Mud flaps at the front and rear * TFT display Instrument cluster in color * Wheel chocks (2) * Warning light * Maintenance indicator * Electronic immobilizer * Central locking with remote control ... and much more ----The vehicle is unprocessed! Nationwide delivery possible for an additional charge. Subject to errors and prior sale. We are happy to accept your vehicle as part payment. Financing / leasing also possible without a down payment! Do you have any questions? We are happy to advise you!

Condition: used, Year of construction: 2003, functionality: fully functional, Used REK cleaning system Iodevyp D Tspfx An Iebc Very little used Full vacuum technology 12 kW distillation unit with hot discharge technology, Basket size 530x320x200 mm The system has been technically tested by us for functionality. We can quickly provide training, commissioning, service, and spare parts. We have over 25 years of experience with REK systems. System dimensions: 2700x2500x2600 mm

Condition: new, neu ca. 10 Wochen ab Auftrags Türkei 4700 € 315 mm 315x32x63 mm 45 / 90 U/Min 45 ° 45 ° rund 105 mm / quadratisch rund 90 mm / quadratisch rund 90 mm / quadratisch 1,3 - 1,8 kW 600 mm 1000 mm 1400 mm 200 kg Manual vice Robust double joint pivot Low-voltage start/stop switch in the handle 45-degree left and 45-degree right mitre cuts Iedpfxswmzfzs An Isbc Split vice (clamps before and after the sawblade) Sawblade not included

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, operating hours: 5,000 h, pressing force: 200 t, table width: 1,400 mm, table length: 3,200 mm, total length: 3,200 mm, total width: 1,400 mm, total height: 2,900 mm, overall weight: 23,000 kg, operating temperature: 200 °C, workpiece height (max.): 150 mm, temperature: 210 °C, For sale is a virtually new veneer press with an infeed/outfeed table from the German manufacturer Wemhöner, model KTV1E (serial number 1645, year of manufacture 1992). The machine is in excellent condition and has seen very little use. Machine type: Continuous press Manufacturer: Wemhöner Type: KTV1E Serial number: 1645 Selecta Year of manufacture: 1992 Ijdpownpcdjfx An Iebc Location: 57223 Kreuztal Available: immediately Technical data Press length: 3200 mm Press width: 1400 mm Heating plates: yes Heating medium: oil Infeed: yes Conveyor belt: 3200 x 1900 mm Outfeed belt: 3200 x 1900 mm Press area: 3200 x 1450 mm Clearance height: approx. 100 mm Preheating temperature: 200° Heating capacity: 45 kW Heating medium: oil Pressing force: 200 tons The press machine is in top condition, has seen very little use, and has been used exclusively for development projects for the past 15 years. I would be happy to send you more information and pictures upon request. The machine is available immediately and can be inspected at any time by appointment. Self-collection only! Functional video available upon request. If you are interested, I am happy to provide you with further information or arrange a viewing!

Condition: excellent (used), Year of construction: 1993, Wieser Vorbrecher DV 1350-V EPS Crusher / Grinder / Shredder Capacity: 40 m³/h Available: 3 units In addition to its crushing function, the machine also acts as a rubbing mill (granulator), designed to break the material down into individual EPS beads. Unlike simpler machines of this type, which only feature a primary crusher, this is a much more advanced design consisting of two main sections: 1. Upper Section: Twin-Shaft Primary Crusher This section performs the initial size reduction of bulky material before it enters the grinding chamber. 2. Lower Section: Grinding and Rubbing System The final reduction process takes place in the lower chamber, which consists of: -Rotor: equipped with 3 moving blades -Stator (fixed knives): equipped with 2 stationary blades -Screen: located at the bottom of the chamber, allowing only sufficiently processed material to pass through Optional Equipment The machines can also be supplied complete with dust collectors and an extraction fan. Ibedpfx Anewtmw Ae Iec The Wieser ESTAL1350 dust collectors were specifically designed to match the throughput of the crusher. Tags: EPS shredder, EPS crusher, styrofoam grinder, recycling machine, waste reduction system, foam granulator, EPS waste processor, volume reduction machine, compactor, dust collector, extraction fan.

Condition: good (used), Incremental encoder with solid shaft, absolute encoder, encoder, rotary encoder, encoder, absolute encoder, absolute encoder, function encoder, resolver, rotary pulse encoder, tachogenerator, incremental encoder -Manufacturer: Lenord Bauer, incremental encoder -Type: GEL 260-V-01250A201 -Shaft: Ø 8 x 25 mm Ijdpfx Anow Aa Ake Isbc -Bolt circle: Ø70 mm M5 -Number: 1x encoder available -Dimensions: 107/90/H90 mm -Weight: 0.6 kg

Condition: excellent (used), Year of construction: 2021, operating hours: 21,000,575 h, functionality: fully functional, machine/vehicle number: 21000575, Peristaltic pump ALLMOVE ASH 15 GN-ID/1, year 2021, serial number: 21000575, very good condition Peristaltic pumps of the ASH series from Allweiler have a unique design that allows them to work with the most complex liquid media. They are capable of pumping almost any fluid or very viscous substances, including aggressive agents or flows contaminated with solid or fibrous inclusions. Pumps of this type are widely in demand in many industries as an effective and reliable means of transporting liquids of various natures. The working unit is based on the following design elements: a thick-walled elastic hose for conducting liquids and a rotor with a shoe for pressing and pushing the flow. With this pumping principle, there is no turbulence or emulsification of liquids. Self-priming units are easy to set up and install, with the possibility of reversible operation. Sealing of the drive with a sealing ring. The cooling agent is located directly in the pump body. Pumping liquids: highly viscous substances, containing abrasive, solid particles or fibres, gas-containing, aggressive agents. Application areas: wastewater treatment, chemical industry, paper production, food industry, agriculture, etc. Characteristics of ALLMOVE ASH 15 GN-ID • Volumetric flow: up to 60 m³/hour; • Supply pressure (PD): up to 16 bar; • Differential pressure: up to 15 bar; • Liquid viscosity: up to 100,000 mm²/s; • Permissible sizes of solid particles: 5 - 33 mm; • Permissible fiber length: 150 - 820 mm; • Liquid temperature: up to 80 °C; Ibedpswhmm Hjfx An Ijc • Installation: dry, horizontal, on a support plate. Price Euro 2.900 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes, and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare prealabilă. We speak English. / Wir sprechen Deutsch. / Beszélünk magyarul. / Nous parlons français/Vorbim romana

Condition: used, maximum load weight: 42,400 kg, overall weight: 64,000 kg, axle configuration: > 3 axles, first registration: 01/2011, Equipment: ABS, Goldhofer STZ-VLS4-37/80 and Goldhofer Dolly SX 1-25/80 - Height-adjustable low bed with removable gooseneck ----* Manufacturer: Goldhofer * Type: STZ-VLS4-37/80 * First registered: 01/2011 * Color: yellow * Total weight: 64,000 kg * Empty weight according to vehicle registration document: 21,600 kg * Axles: 4x BPW axles, of which 1st axle is steered via turntable steering, the remaining 3x axles are hydromechanical forced steering * Steering knuckle axles up to max. 45 degrees * Tires: 235/75 R17.5 approx. 70% * Suspension: Air suspension with lifting and lowering * EBS Wabco * Removable gooseneck with aluminum side walls * Hydraulic cylinders for support on the tractor unit * Toolbox with flap at the front of the gooseneck * Controls and pressure gauge on the left of the gooseneck * Gooseneck designed for freely rotating 1-axle dollies * Low bed for the chassis can be raised and lowered hydraulically * Chassis with excavator trough (starts from the 2nd axle) * Extendable widening of the loading area 440mm (2x 220mm) and 700mm (2x 350mm) * Wooden planks to bridge the gap between the widenings * Air suspension with raising and lowering to min. 825mm to 1,025mm (no driving position) * 2x fixed driving heights: * 1st driving height 925mm +100mm/-100mm * 2nd driving height 885mm +100mm/-100mm * 2 pairs of retractable lashing eyes in the gooseneck floor * 5 pairs of retractable lashing eyes in the low bed floor * 5 pairs of side lashing eyes on the low bed chassis * 4 pairs of stake holes in the low bed floor * 3 pairs of retractable lashing eyes in the chassis floor * 2 pairs of side lashing eyes on the chassis chassis * 2 pairs of stake holes in the chassis floor * 2x lashing eyes in the excavator trough * Rear of the vehicle sloped 10 degrees * 1-part hydraulic ramps (2,850mm x 720mm) and hydraulic supports at the rear * Operation of hydraulic ramps + supports at the rear left * Smartboard at the rear right * Additional LED reversing lights on the gooseneck and at the rear of the low loader * 1st hand German vehicle!! German papers!! 1st hand!! Goldhofer SX 1-25/80 Dolly ----* Manufacturer: Goldhofer * Type: SX 1-25/80 * First registered: 03/2011 * Color: Yellow * Total weight: 28,000 kg * Empty weight according to vehicle registration document: 2,750 kg * Axles: 1x BPW axle * Tires: 235/75 R17.5 approx. 70% / twin tires * 3" fifth wheel plate * Single fender * Supports Iodpfx Ajx Suzasn Iebc * Loading manometer * 1st hand German vehicle!! German papers!!

Condition: new, Year of construction: 2026, fuel type: diesel, motor manufacturer: Volvo TAD1381GE, General information Field of application: Construction Weights Empty weight: 5.370 kg Functional Generator capacity: 390 kVA Dimensions of cargo space: 486 x 206 x 259 cm CE mark: yes Other information Fuel consumption: 53 Liter / Hour at 75% load Generator: Stamford S4L1D-E41 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 534 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel Iedpfxsyrbb So An Isbc - Steel canopy - Tank

Condition: ready for operation (used), Year of construction: 2011, A diesel side loader from the manufacturer Bulmor (formerly Jumbo) is available. Load capacity: 7000kg, load center: 700mm, lifting height: 4500mm, mast type: duplex, free lift: 1540mm, engine power: 74.5kW. Machine dimensions X/Y/Z: approx. 2250mm/5000mm/3000mm, weight: approx. 11000kg, operating hours: approx. 22300h. An on-site inspection is possible. Ibedpfx Anszcp Ubo Isc

Year of construction: 1972, condition: ready for operation (used), Includes (1) DEMAG TC 140 crane, year of manufacture: 1972, load capacity: 50t at 3m radius, slewing angle: 360°, outreach: 5500mm, drive: pneumatic, hydraulic, electric, operating hours: 7153h. (2) Faun LK 910/483-V vehicle, operating hours: 1214h. On-site inspection is possible. Ijdpfsuzx T Rjx An Iobc

Year of construction: 2008, condition: ready for operation (used), Travel X/Y/Z: 1050mm/800mm/560mm, C-axis: 360°, spindle head swivel range: -10°/110°, speed: 18000rpm, spindle power: 25kW/35kW, table diameter: 950mm, table load capacity: 800kg, max. workpiece height: 500mm. Tool positions: 30, tool holder: HSK A 63, max. tool diameter: 80mm/130mm, max. tool length: 250mm, rapid traverse: 90m/min, feed: 20m/min. Control: Heidenhain iTNC 530, operating hours: 117490h, spindle hours: 18086h. Including chip conveyor, IKZ, distance measuring system, Blum laser and measuring probe. Documentation available. On-site inspection is possible. Ibedpfxjv H Dgis An Iec

Condition: used, Year of construction: 2008, functionality: fully functional, machine/vehicle number: 962157, type of input current: AC, input voltage: 230 V, overall weight: 3,500 kg, sheet thickness steel (max.): 150 mm, working length: 6,000 mm, protection type (IP code): IP21, cutting speed: 12,000 mm/min, table length: 6,000 mm, table width: 2,000 mm, working width: 2,000 mm, We offer a used plasma and oxy-fuel cutting machine, Varstroj VARCUT 3.2 L2/Ph - 2.5x6.0/1(PL+G). Serial number: 962157 Ibodpfoz D Tq Ejx An Ioc Connection voltage: ~230 V Frequency: 50 Hz Connection power: max. 2.0 kVA Maximum cutting speed: 12000 mm/min Control: CNC Number of torches: 1+1 Cutting thickness (oxy-fuel): 150 mm Working width: 2000 mm Working length: 6000 mm Cutting gas: Propane butane, air Mechanical protection: IP 21 Total weight: approx. 3500 kg Year of manufacture: 2008 Plasma: TRC-121 OTC Daihen D-12000 30-120A Cutting up to 25 mm thickness with plasma If you have any further questions or require more information, please send us a message or call us.

Condition: used, mileage: 115,000 km, power: 81 kW (110.13 HP), first registration: 06/2022, fuel type: diesel, color: white, gearing type: mechanical, emission class: euro6, number of seats: 9, Equipment: ABS, air conditioning, central locking, electronic stability program (ESP), immobilizer system, soot filter, Caravelle model long wheelbase power steering, electric windows, radio, auxiliary heater, first owner, complete service history, very clean, nationwide delivery 295 EUR + VAT, Ijdjz Dcrfspfx An Iobc no pending repairs, workshop inspected. Test drive possible, nationwide delivery 295 EUR + VAT No.: 546 Opening hours: Mon-Fri 8:00 a.m. - 12:00 p.m. and 1:30 p.m. - 5:00 p.m., Saturdays from 9:00 a.m. - 11:30 a.m. more vehicles available at:

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2022, operating hours: 930 h, fuel type: diesel, maximum speed: 40 km/h, color: green, For Sale: Claas Arion 610 Hexashift Stage V (CIS) Agricultural Tractor, Type A96 100 Year of manufacture: 2022 Operating hours: 939 hours The tractor is in excellent, like-new condition, has seen very little use, is fully operational, and is ready to work with no additional investment required. It is powered by a 6-cylinder John Deere DPS 6.8 L engine compliant with Stage V emissions standards (SCR, DPF, DOC, AdBlue). Maximum power: 145 HP Rated power: 135 HP Iedpezmv Twjfx An Iobc Homologated power: 139 HP The tractor is equipped with a Hexashift 24/24 transmission (without creeper gears), featuring an electro-hydraulic shuttle and automatic powershift gear changes. Maximum speed is 40 km/h. It has 4WD, a differential lock, and a PROACTIV suspended front axle. The Load Sensing hydraulic system delivers 110 l/min and includes four rear hydraulic remotes (2 mechanical, 2 electro-hydraulic). Rear Category III three-point linkage and PTO speeds: 540 / 540 ECO / 1000 / 1000 ECO. The tractor does not have a front PTO. It is fitted with a Claas front linkage (front hitch) with a 3.0-ton lifting capacity and suspension. A reinforced loader frame is installed. The tractor comes with an ALO Quicke Q6M front loader featuring suspension, a quick coupler, Euro hitch, a bucket, and pallet forks. The cab is suspended and equipped with air conditioning, a pneumatic driver's seat, a CIS terminal with a color display, Bluetooth radio with hands-free function, and a full set of work lights. Standard roof (without sunroof). Tyres: Front: 480/70 R28 Mitas Rear: 580/70 R38 Mitas Both front and rear tyres are in very good condition. The tractor can be inspected and collected in Germany by prior appointment.

Condition: used, mileage: 34,155 km, power: 100 kW (135.96 HP), first registration: 10/2023, fuel type: diesel, overall weight: 3,500 kg, color: white, gearing type: mechanical, Total allowable weight: 3500kg Iedpszyc I Ujfx An Iobc