Used Lachnit Typ 300 S for sale (76,270)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,816 kg, maximum load weight: 33,184 kg, overall weight: 38,000 kg, axle configuration: 3 axles, total length: 11,250 mm, total width: 2,550 mm, suspension: air, tire size: 385/55 R22,5", tire condition: 100 %, Fliegl 45 ft Container Chassis Tailor-Made Transport Solution Configure your Fliegl vehicle according to your individual requirements. The vehicle shown is an example. Production and equipment are customized to customer specifications. Chassis High-strength fine-grain steel welded chassis Fifth wheel with replaceable 2" kingpin and two kingpin positions Container locking system for: Rear extension retracted: 1 × 20 ft container (flush with rear, reduced kingpin load) Rear extension – Position 1: 1 × 30 ft, 2 × 20 ft, or 1 × 40 ft container with gooseneck tunnel Rear extension – Position 2: 1 × 45 ft container with gooseneck tunnel and rear overhang No rear height adjustment and no folding center supports; containers without a gooseneck tunnel cannot be transported Front locking adapter for securing containers without a tunnel from below, including storage bracket Roller-mounted rear extension with manual crank 24 t two-speed landing gear, single-side operation Two wheel chocks with holders Aluminium side underrun protection Galvanized steel rear underrun protection Extendable rear underrun protection for 45 ft containers Half-shell mudguards EC-compliant anti-spray mud flaps Rear impact protection Axles & Suspension SAF disc brake axles with 430 mm brake discs Laser-aligned axle and suspension system for reduced tire wear and lower fuel consumption Offset axle spacing for combined transport (GCW up to 44 t) Air suspension Automatic lift axle on the 1st axle with forced lowering and traction aid (activated by braking three times). Traction aid operates up to 30% axle overload and a maximum speed of 25 km/h. Braking System Dual-line pneumatic braking system Color-coded air lines for easier servicing Spring parking brake Two interchangeable coupling heads at the front (without connecting hoses) Electronic Braking System (EBS) with front EBS socket (without connecting cable) Trailer may only be operated with towing vehicles supporting ABS functionality Raise & lower valve Vehicle Stability System (RSS) Axle load monitoring via EBS CAN bus for display in the truck cab (truck preparation required; not a calibrated weighing system) Wheels & Tires 385/55 R22.5 tires, manufacturer's choice Steel wheels, factory silver Electrical System 24 V electrical system Multi-chamber lights with LED tail and brake lights Yellow LED side marker lights (On certain tractor units, diagnostic messages may occur although all lighting functions correctly.) Two white front position lights Two red/white rear outline marker lights Two 7-pin front sockets (without connecting cables) Operating Information When transporting a 45 ft container with a short tunnel, with or without the front extension, the maximum permitted kingpin-to-rear-end dimension and the legal overall vehicle combination length of 16,500 mm are exceeded. The rear underrun protection must be extended manually. A special permit in accordance with §70 StVZO is required. Registration & Approval Registration country: Germany DEKRA approval and inspection certificate (according to §13 EC-FGV) Gedpfx Ajzlkiwehzsud 24/7 service hotline Prepared for single-line license plate holder ECE R48 contour markings (white on the sides, red at the rear) Finish Hot-dip galvanized chassis including passivation 15-year anti-corrosion warranty Landing legs with black coating

Condition: used, Year of construction: 2003, Milling machines Gedevtfpfjpfx Ahzjud Travel distance X: 415 mm Travel distance Y :340 mm Travel distance Z: 355 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Heidenhain iTNC 530 spindle chuck: HSK 40 E spindle revolutions: 42000 rpm table size X: 470 mm table size Y: 400 mm max. workpiece weight: 500 kg tool changer: 30 - time Rapid traverse: 30 m/min electronic handwheel

Condition: used, mileage: 7,939 km, power: 174 kW (236.57 HP), fuel type: diesel, gearing type: automatic, overall weight: 3,200 kg, first registration: 02/2025, color: blue, suspension: air, fuel: diesel, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill Start Assist, Q50 Removable Tow Bar with Ball Head, FB4 AMG Spoiler Lip on Tailgate, F2W Winter Package, JA7 Blind Spot Assist, T56 Electric Operation for Left Sliding Door, T55 Electric Operation for Right Sliding Door, EY5 Mercedes-Benz Emergency Call System, BS1 Brake Calipers with Mercedes-Benz Lettering, EY6 Breakdown Management, B25 Electric Parking Brake, EI0 Wireless Charging System for Mobile Devices, R1Q Alloy Wheels 8.0Jx19, 10-Spoke Design, LG4 Tail, Brake, and Indicator Lights with LED Technology, SE1 Active Seat Ventilation for Front Passenger, SE0 Active Seat Ventilation for Driver, XO7 Mercedes-Benz Mobilo with DSB and GgD, SE5 Lumbar Support Driver’s Seat, SE4 Lumbar Support Passenger Seat, QA4 Trailer Load 2500 kg, T70 Child Safety Locks on Rear Passenger Doors, ZC6 Sales Code 1, T74 Entry Grab Handle, Y10 First Aid Kit, MJ8 ECO Start-Stop Function, IB6 Model Series C447 Vito/V-Class, 805 AEJ X4/1, SF2 Front Passenger Seat Electrically Adjustable, SF1 Driver’s Seat Electrically Adjustable, H00 Warm Air Duct to Passenger Compartment, H05 Rear Cabin Seat Ventilation 1st Row, C6L Multifunction Steering Wheel, Z42 Registered as Passenger Car, C74 Mercedes-Benz Illuminated Sill Plate, H12 Auxiliary Hot Water Heater, J55 Seat Belt Warning Device for Front Passenger Seat, H16 Seat Heating for Driver, H15 Seat Heating for Front Passenger, XA5 Weight Variant 3,200 kg, RF1 Tire Make: Continental (10), SH2 Thorax-Pelvis Sidebag Passenger, SH1 Thorax-Pelvis Sidebag Driver, SH8 Windowbags for Driver, Passenger, and Rear, H20 All-round Heat-Insulating Glass, JW8 ATTENTION ASSIST, Y44 Warning Triangle, ZG2 Permanent All-Wheel Drive, JX2 Maintenance Interval 40,000 km, FP3 Mirror Package, BH1 HOLD Function, SZ8 Storage Net. Telephone availability: Monday to Friday until 20:00, Saturday until 16:00! Further Information: Leasing/Financing and Trade-in possible! Gjdpjxxq Ugsfx Ahzjud Errors and prior sale excepted! All information without guarantee ... more on our homepage

Condition: used, axle configuration: 3 axles, first registration: 04/2022, loading space length: 13,580 mm, loading space width: 2,460 mm, loading space height: 2,650 mm, total length: 14,100 mm, total width: 2,600 mm, total height: 4,000 mm, suspension: air, color: other, Year of construction: 2022, Equipment: ABS, = Additional options and accessories = - EBS - Aluminum rims = Notes = Number of axles: 3, Tare weight: 8500 kg, Gross vehicle weight: 42000 kg, Chassis material: Steel, Kingpin size: 2 inch, Aluminum rims, Suspension type: Full air, ABS, EBS, Body construction year: 2022, Side wall material: insulated, Refrigeration unit manufacturer: Thermoking, Refrigeration unit model: Slxi300, Refrigeration unit: Diesel/electric, Unit hours / Diesel: 3087, Wall thickness: 6 mm, Type of cooling: Cooling = Additional information = General information Cab: Day cab License plate: KLEYN1 Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Lift axle; Tire tread depth left: 13 mm; Tire tread depth right: 13 mm Axle 2: Tire tread depth left: 12 mm; Tire tread depth right: 12 mm Axle 3: Tire tread depth left: 7 mm; Tire tread depth right: 8 mm Weights Unladen weight: 8,500 kg Payload: 33,500 kg GVW: 42,000 kg Functional Refrigeration unit: Diesel and electric (3087 operating hours diesel) Wall thickness: 6 mm Environmental Emission class: Euro 0 Condition Overall condition: average Technical condition: average Optical condition: average Damage: none Financial information Leasing price: €551 per month (standard, 60 months); Ask for more information and conditions Gedjxfqv Djpfx Ahzjud = Company information = Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an inquiry via our website. Ask directly about our European warranty package.

Condition: used, functionality: fully functional, Year of construction: 2011, control type: CNC control, degree of automation: semi-automatic, actuation type: hydraulic, controller manufacturer: Jorns, controller model: CNC800, working width: 14,400 mm, throat depth: 1,000 mm, bending angle (max.): 144 °, bending radius (max.): 2 mm, bending radius (min.): 2 mm, type of crowning: manual, sheet thickness (max.): 4 mm, sheet thickness steel (max.): 3 mm, sheet thickness stainless steel (max.): 2 mm, sheet thickness aluminum (max.): 4 mm, sheet thickness brass (max.): 4 mm, sheet thickness copper (max.): 4 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, back gauge travel distance Z-axis: 980 mm, overall weight: 16,000 kg, total length: 15,260 mm, total width: 2,775 mm, total height: 2,003 mm, power: 22 kW (29.91 HP), input voltage: 400 V, input current: 45 A, input frequency: 50 Hz, type of input current: AC, Equipment: CE marking, documentation/manual, emergency stop, foot remote control, Jorns AG is neither the owner nor the possessor of the machine. The machine is being offered for sale on behalf of the customer (based in Sweden). If you are interested, the owner’s contact information will be provided. Gsdpfx Ahezk Dfpszeud Please find below some technical parameters of the machine: Type: SUPER-LINE-300S-1000-RH-SO-OV-CNC800-14.4-SHS-SPEZ Serial number: K11005 Year of manufacture: 2011 Insertion depth: 1000 mm Working length: 14,400 mm Bending capacity: 3 mm mild steel, 4 mm aluminum, 2 mm stainless steel Number of clamping arms: 18 units Number of linkages: 18 units, type 28 Number of bending cylinders: 18 units Number of clamping cylinders: 18 units Base construction: The machine is built from two pieces Control: CNC800 Backstop: Parallel backstop, type 91, built from two pieces, including six backstop fingers. Crowning: Manual crowning at every arm except the first and last Hydraulic system: Equipped with an axial piston pump, 130 l/min, 22 kW engine, max. 250 bar Condition of the machine Accuracy: The machine is in daily use and can be tested at the customer's site in Sweden. In its current condition, the machine achieves 90° +/- 2° bending results in 3 mm mild steel at full length using manual crowning. To increase the bending accuracy, all linkages would need to be replaced. The machine has the following defects: - The touch screen is defective. The machine is currently operated using a mouse. - The upper clamping tool has a dent that could be repaired on site by a Jorns technician. Service Jorns: We are happy to provide a quotation for new linkages, a new panel and support in installing the machine in another location.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,927 kg, axle configuration: 3 axles, first registration: 11/2020, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2020, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Variable height double deck with 22 ALU beams Loading capacity 33 / 66 euro paletts Guedpfoy R Ndasx Ahzod Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 710 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 9 mm Front right - 9 mm Middle left - 10 mm Middle right - 9 mm Rear left - 16 mm Rear right - 16 mm

Condition: used, mileage: 316,939 km, power: 132 kW (179.47 HP), first registration: 08/2010, overall weight: 8,600 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: mechanical, emission class: euro5, Year of construction: 2009, Equipment: ABS, air conditioning, parking heater, Body: - Küpper Weisser spreader - Model: STASF VES, year 2010 - ThermoMAT - Suitable for oil spill control - Storage boxes Equipment: - Cab: C (Compact) - Driver and passenger comfort seats, air-suspended - Automatic climate control - Additional air heater Eberspächer Airtronic D2 - Mechanical sunroof - Flame start system - Fuel tank: 200 L - 6-speed manual transmission Technology: - Rear-view camera - On-board computer MAN-Tronic - Electrically adjustable and heated exterior mirrors - Electric windows - ETA circuit breaker - Beacon lights Safety/Environment: - Rear axle differential lock - Engine brake - Electronic braking system MAN-Brakematic - Rear axle stabilizer - EURO 5 engine Miscellaneous: - German first delivery - 1 previous owner - Engine 4.6 L – 132 kW Diesel - Registration: previously self-propelled working machine 'traffic safety vehicle' - Payload 2,785 kg according to registration certificate - Perm. total weight 8.60 t Since 1972, your reliable partner for all automotive and commercial vehicle needs in 28832 Achim at the Bremer Kreuz. NutzfahrzeugZentrum Behnke always keeps approx. 200 vehicles in stock, including transporters, commercial vehicles, and construction machinery! We continuously offer attractive financing options at special rates. If interested, we are happy to provide you with an individual offer! Trade-in of your commercial vehicle/construction equipment is welcome. Gjdpfowmx Aqjx Ahzeud If a new TÜV inspection is desired, we will gladly offer you this service through our partner workshops. Our offer is generally WITHOUT new TÜV inspection. Delivery of your 'new' commercial vehicle can be arranged nationwide by our external partners at an additional cost. All information provided in advertisements, on the internet, price tags, and images are non-binding descriptions and do not constitute guaranteed properties. The seller assumes no liability/warranty for typographical errors and data transmission mistakes. Listed equipment features may need to be verified separately. Subject to errors and prior sale.

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 02/2021, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2021, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - SCB Full air suspension Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 60 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Loading capacity 33 euro paletts Length/width/heigth - 1341cm/246cm/265cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 5 mm Front right - 5 mm Middle left - 5 mm Middle right - 5 mm Gujdpfozi Npdsx Ahzod Rear left - 5 mm Rear right - 5 mm

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,507 kg, axle configuration: 3 axles, first registration: 08/2019, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2019, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Cooling unit - THERMO KING SLXi 300, diesel and electrical Axles producer - Schmitz Rotos Full air suspension Gjdpfozi Nntex Ahzjud Insulated double rear doors with 4 steel lockrods FP insulated sidewall, 45 mm Plastic toolbox with cover holder Fuel tank, 245 l Electronic brake system EBS Anti-lock braking system ABS ROTOS SCB (disc brakes) Thermometer Insulated ventilation flap in the left hand rear door Contact switch for rear door Aluminium barley seed floor Basket type spare wheel carrier for 2 wheels (6+1) tyres - 385/65R22.5 (11.75x22.5) Double deck with 22 beams Loading capacity 33 euro paletts Length/width/heigth - 1340cm / 249cm / 265 cm Gross vehicle weight - 39 000 kg Approximate own weight - 8 410 kg 3 axles Pallet rack for 36 Euro pallets Tyres Information Front left - 7 mm Front right - 7 mm Middle left - 5 mm Middle right - 5 mm Rear left - 11 mm Rear right - 10 mm

Condition: ready for operation (used), Year of construction: 2003, machine/vehicle number: 22093, functionality: fully functional, volume flow: 4,000 m³/h, filter area: 24.7 m², total height: 3,420 mm, total length: 2,000 mm, overall weight: 725 kg, TECHNICAL DETAILS Filter area: 24.7 m² Volume flow rate: 4,000 m³/h Negative pressure: 2,110 Pa Suction diameter: 250 mm Compressed air connection: min. 6 bar - max. 8 bar MACHINE DETAILS Connected power: 5 kW Motor power: 4 kW Rated speed: 2,925 rpm Rated operating voltage: 400 V Type of current: Three-phase (3 Ph) Rated current: 9.2 A Frequency: 50 Hz Dimensions & Weight Gujdpfszktr Esx Ahzod Dimensions (L x W x H): 2,000 x 1,000 x 3,420 mm Weight: 725 kg EQUIPMENT New filters

Condition: used, mileage: 1 km, first registration: 12/2016, fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, loading space length: 4,910 mm, loading space width: 2,390 mm, loading space height: 800 mm, Year of construction: 2016, FOR SALE: DUMP BODY ONLY F.X. MEILLER 3-way tipper Previously mounted on an Iveco 6x4 (only 12,000 km) from the German Federal Armed Forces stock! Hardly used!!! Godpfoy Unt Isx Ahzoud Year of manufacture: 2016 * Type: D 316 * Max. 16,000 kg * Max. 275 bar * EN 12352-XL * Condition: AS NEW

Condition: used, mileage: 59,876 km, power: 150 kW (203.94 HP), fuel type: electric, gearing type: automatic, overall weight: 3,500 kg, first registration: 12/2021, emission class: euro6, color: white, suspension: steel, number of seats: 7, fuel: electricity, Equipment: ABS, air conditioning, airbag, central locking, cruise control, immobilizer system, navigation system, onboard computer, parking heater, parking sensors, power assisted steering, seat heater, sliding door, soot filter, traction control, E07 Hill Start Assist, LG2 LED Intelligent Light System, D34 Glass Panoramic Sliding/Tilting Sunroof, FB4 AMG Rear Spoiler Lip, JS1 360° Camera, EZ6 Parking Package with 360° Camera, E65 Burmester Surround Sound System, EX8 Navigation Plus, EY5 Mercedes-Benz Emergency Call System, EY6 Breakdown Management, CM2 Bumpers and Attachments Painted in Vehicle Color, FS5 Illuminated Mirror for Sun Visors, R1N Alloy Wheels 7.0Jx17 5-Twin-Spoke Design, FC1 Electronic Key in Chrome Finish, JK5 Instrument Cluster with Color Display, J2A Acoustic Ambient Protection, LG4 Rear, Brake, and Turn Signal Lights in LED Technology, Z1Q EQ Design Package Exterior, XO7 Mercedes-Benz Mobilo with DSB and GgD, SE5 Lumbar Support Driver Seat, SE4 Lumbar Support Passenger Seat, CN1 Side Sills Exterior, T70 Child Safety Lock on Doors in Passenger Compartment, F2Z Decorative Elements Double Stripe Design, T74 Grab Handle for Entry, HH4 Automatic Climate Control THERMOTRONIC, UR1 Seat Rail System with Quick-Release Mechanism, CF9 Basic Chassis Plus, V33 Carpeting in Rear, E1E Digital Extra: Hard Drive Navigation, V36 Headliner, E1D Digital Radio (DAB), Y10 First Aid Kit, E1F Display Diagonal 26 cm (10.25"), IB6 Model Series C447 Vito/V-Class, ES2 12 V Socket Trunk/Cargo Area, VD5 Interior Headliner Crystal Gray, F3S Exterior Mirrors Painted in Black, E1T Touchpad, H00 Warm Air Channel to Passenger Compartment, ES9 Media Interface Cable Kit, MS1 TEMPOMAT (Cruise Control), IK3 Luxury Station Wagon, HI1 Climate Zone 1 (Cold/Comfort), W64 Rear Window that Can Be Opened Separately, US, We will gladly provide you with an individual financing or leasing offer and accept your used vehicle in trade. We look forward to welcoming you to our dealership for further consultation. Vehicle condition is in accordance with its age/mileage; minor touch-up paintwork has been carried out on the vehicle as part of the preparation process. No liability for printing and typographical errors. Errors and prior sale reserved ... more on our website. Guedszlrryspfx Ahzod

Condition: used, Year of construction: 2006, x-travel 450 mm y-travel 330 mm z-travel 350 mm control Heidenhain iTNC 530 turning speeds 42.000 U/min tool taper HSK 40 E table surface area 470 x 400 mm T-slots 5 max. table load 500 kg Number of working hours 51993 h spindle hours 13858 h total power requirement 15 kW In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Guodsy Nn Etopfx Ahzsd Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: excellent (used), Complete Grinding Room for bandsaw blades Gedpfxokx E Sds Ahzoud

Condition: ready for operation (used), Edur centrifugal pump NUBX 300 A1 Fe/50Hz, serial number: 35119, with Siemens 1LA7073-2AA99-ZN00 motor, used, in good condition, 100% functional, scope of supply as shown in the photos. Gsdpfxjzkc U As Ahzeud

Condition: used, Year of construction: 1985, Used machine Godpfezk N Dwox Ahzoud Year of manufacture: 1985 Features and technical data: - For construction drilling horizontally and vertically - For vertical row drilling with 32 mm spacing - Vertical drilling unit with freely positionable double spindle drill heads on index shaft - 1.5 kW motor with 1400 rpm - 1.5 kW motor with 2800 rpm - Drill heads with pneumatic stroke - Pneumatic material clamps - Pass-through width approx. 850 mm - Includes various stops and drill bits Availability: short notice Location: Röllbach

Year of construction: 2022, condition: used, Used equipment Year of manufacture: 2022 Features and technical data: - Allows a single operator to easily load panels onto the platform frame and swing them from a vertical to a horizontal position - Suitable for use with panel saws, vertical panel saws, rack storage, or for panel transport between workstations - Swivel frame with two-position locking mechanism (vertical and horizontal) - Table height can be adjusted to the desired working level via foot-operated hydraulic pump - The design with a smooth scissor-lift mechanism ensures the platform is raised and lowered in a perfectly parallel manner Gsdpfx Ahozk Nqdezoud - Sturdy roller supports on the lower rail and multiple all-direction rollers for ergonomic and easy handling - Counterweight on the lower frame provides secure positioning and maximum stability when moving the table - Operator pedal for the workstation table is easily accessible at all times - Easy to maneuver thanks to four swivel castors with a diameter of 125 mm - Two castors equipped with parking brakes - Swivel frame can be mounted and dismounted on the platform base frame quickly and easily - Complies with EN 1570-1 safety standards - Load capacity: 300 kg - Maximum table height: 1010 mm - Minimum table height: 400 mm - Swivel frame width: 1800 mm | Length: 1500 mm - Roller diameter: 125 mm - Dimensions: 1200 x 740 x 400 mm - Weight: approx. 80 kg - Swivel frame weight: 10 kg Availability: short-term Location: 63934 Röllbach

Condition: used, mileage: 79,106 km, power: 118 kW (160.44 HP), first registration: 02/2014, fuel type: diesel, fuel: diesel, emission class: euro5, Year of construction: 2014, Schmidt Aebi Sweeper, Type 18 / FMH 5500 - In top condition! - Self-propelled work machine! - 9,938 operating hours • Right-hand drive • Engine: IVECO 118 kW diesel • Displacement: 3,920 cm³ • EURO 5 • Rotating beacon at the front and rear • Differential lock • Multifunctional control lever • On-board computer • Rear-view camera • Air conditioning • Radio / CD • All-wheel steering? • All-wheel drive? • Power steering • 2-row sweeper brushes, front and right • Leaf collector at the rear Gusdpfx Aezk T Iyjhzod • Infinitely variable hydrostatic drive • Spray system at the front • Container capacity: 4.07 m³ / 3.80 m³ (gross/net) • Water tank: 810 liters • Tire size: 285/70 R19.5 • Tire tread: 11/11 / 8/8 mm • Front axle load: 4,120 kg • Rear axle load: 6,496 kg • Permissible gross vehicle weight (GVW): 10,600 kg • Unladen weight: 3,790 kg • Payload: 6,810 kg - German vehicle - TÜV/emission test/safety inspection: upon request and subject to an extra charge: new! Errors and prior sale excepted! = Further information = Unladen weight: 6,810 kg Payload: 3,790 kg GVW: 10,600 kg

Condition: new, functionality: fully functional, Year of construction: 2026, New machine Vertical broaching machine VADARI GmbH TYPE SRM 2027-60 KN - 90 KN or 120 KN also possible! BROACHING MACHINES MADE IN GERMANY. Note: The machine can also be offered in a version with a tensile force of 90 KN (9 tons) or 120 KN (12 tons). ===== Currently available at special conditions ===== - Used machine currently available! Gjdpsuqbnhsfx Ahzsud ==> Information for manufacturing companies or dealers with their own production: The drawings, rights, spare parts, customer and prospect data, planning and production documents (including plans for a version with a 9-ton tensile force) of the broaching machine can possibly be purchased from us. Please contact us if you are interested. ==> The new machines are manufactured by us on a project basis after the order is placed. Short-term production and delivery are possible. ==> Spare parts such as spindles and spindle nuts for Wolff SRM and VADARI SRM broaching machines are currently available for immediate delivery. Cost-effective and extremely robust vertical broaching machine for long-term use. Broaching tools (including special broaches for internal gears, etc.) and accessories are available. Please inquire separately. All broaching tools and tool holders from other manufacturers can be used with our broaching machine! Complete manufacturing and assembly in our plant in Germany. Furthermore, we also offer spare parts for Wolff and VADARI SRM broaching machines (spindles, spindle nuts, motors, gears, and all other required components - including electrical components). Vertical broaching machine Type SRM 2027 - NEW MACHINE: 60 KN version: The application area is primarily in the production of keyway grooves from 3-28 mm (but also larger) and profiles of similar dimensions. The compact machine, which requires little space, can therefore be used successfully in small, medium and large companies. The low price justifies the purchase even for small series and individual production. The drive is provided by a pole-switching gearbox brake motor. The maintenance-free twin-spindle drive ensures smooth operation and a central pulling point, as well as constant cutting performance. The free tool table allows even large workpieces to be placed without hindrance. In most cases, the workpieces to be broached do not need to be clamped firmly. The stroke adjustment is carried out by adjustable limit switches with stroke limitation. For short hubs/workpieces, several workpieces can be placed on top of each other. Broaching tools, mandrels and spare parts on request. Technical data: Tensile force: 60 KN at 3 m/min, 40 KN at 6 m/min. Broaching speed: 3 m/min + 6 m/min. (Optional: stepless speed adjustment (from 0 m/min to 6 m/min) possible with extended electronics) Return speed: 6 m/min. Stroke: 1050 mm Broaching tool length: 1200 mm Workpiece diameter: any Work table: 450 x 350 mm Table opening: 140 mm Weight: approx. 510 kg Floor space: 750 x 570 mm Total height of the machine: 1510 mm Drive power: 3.7 / 4.4 KW Electrical equipment: 400 / 230 volts 50 Hz Control voltage: 230 volts Operating voltage: 400 volts 50 Hz Painting: Exterior RAL 7035/7036/7016, interior RAL 3000 Safety door: standard equipment Coolant system: standard equipment The machine complies with the current Machinery Directive and has the CE marking.

Condition: excellent (used), JDK Type/Model: WDE-S1K-15/+ 15°C/004 Industrial Water Chiller JDK WDE-S1K-15/ Chiller | 400 V | R407C Description: For sale is an industrial water chiller / cooling unit (chiller) manufactured by JDK. The unit provides reliable cooling of water or water-glycol mixtures for machines, production facilities or technical processes. It is designed for continuous operation in industrial environments and features an integrated circulation pump, electronic temperature control as well as comprehensive safety and monitoring functions. Technical Data: Gsdpozix Ivjfx Ahzsud Manufacturer: JDK Model: WDE-S1K-15 / +15°C Year of manufacture: 2021 Supply voltage: 400/230 V, 50 Hz Power consumption: max. approx. 15.5 A Refrigerant: R407C Compressor: Copeland Scroll Mobile on castors Protection class: IP43 Weight: approx. 270 kg Condition: used Scope of delivery: (see picture) (Subject to changes and errors in the technical data. All information is provided without guarantee!) If you have further questions, please feel free to contact us by phone.

Condition: used, Bündelpresse / Bundle Press SPLEK SL 82B-300 Baujahr / Year 1996 - Serial-No. 1589 Pressplattengrösse  / Press Plate Size max. 220mm (high) x 330mm (width) Einsatzlänge / Insert length 770mm Stapel Presskraft maximal 20KN Geeignet zum Pressen und Bündeln von gefalzten Bogen, Broschüren, Buchblocks sowie Kartonagen. For Pressing and Bundling of Folded Sheets, Brochures, Book bBlocks and cardboards. Online-Video-Inspection by WhatsApp - MS Zoom - Telegram On Stock Emskirchen/Nürnberg - Available Immediately - Can be test Gujdpfxew Nhc Re Ahzsd

Condition: good (used), Year of construction: 1999, Ref. -No.: 10365 Manufacturer: MONFORTS Type: KNC 8 S - 3000 Year of construction: 1999 Type of control: CNC-Steuerung Control: MTC K Storage location: Halberstadt Country of origin: Deutschland Machine-No.: 178.05 X stroke: 455 mm Z - stroke: 2850 mm Chuck diameter: 315/400/500 mm Centre Distance: 3000 mm Feed Capacity - Z: 23,9 kN Feed Capacity - X: 11,3 kN Rapid Travel Speed X-Axis: 6,8 m / min Rapid Travel Speed Z-Axis: 4 m / min Circumferential diameter over radial slide: 540 mm Max swing diameter: 830 mm travel of the cross slide: 450 mm Gjdpezkpu Ajfx Ahzjud Spindle head max. passage for violent material: 88 mm Spindle head max. passage for bare material: 90 mm Tailstock outside diameter of the quill: 125 mm Tailstock maximum quill stroke: 200 mm Tailstock inner cone: MK6 Type hydraulic tank: 15 L. coolant reservoir: 220 L. Coolant tank at chip conveyor: 160 L. Machine length: 5200 mm Machine width: 2110 mm Machine Height: 1995 mm Weight Of The Machine Ca.: 6,850 (Ohne Späneförderer und Kühlmittelbehäter) t Headstock Spindle Head: DIN 55027 - 11x290 Further information: Additional lubricating oil tank approx. 6l incl. tools Machine is under power and can be inspected by arrangement.

Condition: used, Year of construction: 1979, max. wheel diameter 350 mm gear width 350 mm max. module 8 min. module total power requirement 7,5 - 22 kW Gjdpfxet Hwxze Ahzeud weight of the machine ca. t dimensions of the machine ca. m Gear hobber with gear shaping device, 2-cut cycle

Condition: used, empty load weight: 6,520 kg, maximum load weight: 23,480 kg, overall weight: 30,000 kg, axle configuration: 3 axles, first registration: 05/2019, loading space length: 8,610 mm, suspension: air, tire size: 235/75R17,5 ---/140J, color: other, gearing type: other, front tire size: 235/75R17,5 ---/140J, rear tire size: 235/75R17,5 ---/140J, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, Loading area length drop deck approx. 6.50 m, loading area length total approx. 8.60 m, loading height approx. 900 mm, , Vehicle is offered on behalf of a bank, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Gjdpfxszkt Ele Ahzeud

Condition: used, functionality: fully functional, maximum load weight: 27,000 kg, overall weight: 8,809 kg, axle configuration: 3 axles, first registration: 05/2022, total length: 14,040 mm, total width: 2,600 mm, suspension: air, color: white, Year of construction: 2022, Equipment: cooling unit, full service history, power assisted steering, Technical specifications Gusdpfszlnihox Ahzod FP 60 SMART. THERMO KING SLXi 300 - 50 with BlueBox, OptiSet and modulation. 2 temperature sensors for CargoWatch FP double leaf insulated rear door, NX17 foam, w. double stainl. steel lock. mech. Plastic toolbox with cover holder, sleeves and drawer behind the unit. SCHMITZ black plastic fuel tank 245l 1 filling neck; BIO-Diesel proofing. Tyres 385/65 R22.5. Overall length - 13550mm. Overall trailer width - 2600mm. Total height (unladen) - 4000mm. Pallet rack for 36 Euro/ 24 ISO pallets. ROTOS SCB running gear (disc brakes). Tyres Information Front left - 5 mm Front right - 5 mm Middle left - 5 mm Middle right - 5 mm Rear left - 5 mm Rear right - 5 mm