Used Legi-Air Labeling Machine for sale (82,330)

Condition: used, MAIR Automatic packaging machine MPS RH150/D/4/SL & SIGNODE Automatic strapping unit M400 1. MAIR PACKAGING MACHINE, model MPS RH150/D/4/SL Model MPS RH150/D/4/SL Pat. automatically packs round tubes in hexagonal bundles. The Machine allows the strapping operation to be carried out automatically in a fix position, with the bundle moving sideways and stopping automatically at the programmed strapping positions. It is composed of: - Four tube lift chain conveyors with carrier teeth and intermittently driven for the lifting of one tube at a time, coming from the threading machine, to the aligning area; - One driven rollway to align the tube against an adjustable end-stop, before the row formation; - Two storage areas for the tube row; necessary during the bundle evacuation cycle; - One sturdy structure in welded structural steel, forming a bridge; - Tube row handling system which picks up a row of tubes at a time from the second row storage and places it down onto the bundle forming brackets. - Handling is performed by a series of electromagnets which perform a rotary movement during the row transfer cycle; - Four driven vertical brackets for bundle formation and holding. They are provided of adjustable blades according to the required bundle size and shape and they will be lowered in order to allow the bundle laying down on the evacuation trolley. - Driven evacuation trolley, sliding on rails fixed to the floor and equipped with lower driven rollers and pairs of retaining vertical loose rolls. - Driven flat conveyor to transport the bundle after the strapping area. - Driven storage chains suitable to approach bundles at the selected quantity. - Drainage station for bundle lifting, to allow the coolant outlet from tubes; it is equipped with two hydraulic devices driven by a hydraulic power pack. - Control switch cabinet. 2. SIGNODE AUTOMATIC STRAPPING STATION, model M400 The formed bundle is automatically transferred, by the driven rollers of the evacuation trolley, to the automatic Strapping Station. The bundle will be stopped at the programmed strapping positions to allow the automatic application of the steel strap. It is composed of: - SIGNODE automatic Strapping Machine Model M400/PA/TSM for vertical strapping, - Pneumatic strapping floating head for steel strap of 32 mm. width (1¼") and 0,9 mm. wall thickness; - 450 kg. jumbo coil dispenser with electrical unwinding; - Switchboard. 3. WEIGHING STATION Model KG8/DY The weighing station weighs tube bundles by means of load cells. Bundles are transferred by the driven storage chains to the weighing position. The Weighing Station is located under the pneumatic lifting devices which will lift the bundle in order to allow the weighing operation. Hjdpfx Asymahyomgon It is composed of: - Bottom frame to be fixed to the floor, complete with four supports, linkages and loading cells. - Top holding frame, able to receive the bundle lifting devices. - Compact weight transmitter. 4. MANAGEMENT INFORMATION SYSTEM Model DATAPACK 3/T The Datapack Management System software allows the operator : - To control and monitor tube production in real time. - To set the a new bundle configuration with its strap application positions. - To store the various bundle configurations and strap application positions into an archive where they can be easily retrieved. - To create batches of different bundle configurations and then load them into one production sequence. - Monitor all alarm and fault messages (trouble...

Condition: used, Automatic packing machine Manufacturer : MAIR Hsdpfx Amevtp Hbogon Model : .90.D.5.SL Automatic strapping machine with automatic wood support insertion Manufacturer: ITIPACK Model: SKE/M/TS-31 J-WILT/4MR Working range Diameter round: 16 - 90 mm Thickness range: 0.8 - 5.0 mm Length: 3,5 - 10 m INCLUDING - Rollway (aprox.24m) with 2 sections - MAIR .90/D/5/SL, for hexagonal & rectangular bundles - Bundle lateral conveyor to strapping - AUTOMATIC Strapping machine ITIPACK with wood insertion - Longitudinal chain conveyor of strapped bundles - Bundle weighting and emulsion draining station - Bundles transversal chain for storage section - Electrical control and operator control panel Thickness: 0.8 - 5.0 mm Tube diameter: 16 - 90 mm Length: 3,5 – 10 m Rectangular bundle: 200 x 200 mm - 650 x 520 mm Hexagonal bundle: 230 x 200 mm - 600 x 520 mm Bundle weight: 3 Tn

Year of construction: 2010, condition: excellent (used), functionality: fully functional, 1 x Giemme Thermo Packaging Machinery S.r.l. semi-automatic shrink bundling machine. Hsdpjyzxgfsfx Amgen Model – ALTAIR 70 P. Serial number – 001.041.10. Date of manufacture - 2010. Speed – up to 12 packs/minute. Electrical supply – 400 V / 50 hz / 3 phase. Power – 20 kW. Overall dimensions – 3000mm long x 1200mm wide x 2000mm high.

Condition: used, Type: David Dehairing And Flaming Machine Slaughter performance approx. 40-50 pigs/hour Pigs up to approx. 270 kg Machine body in hot-dip galvanized or stainless steel design Built-in control cabinet Roller equipped with 36 special clubs Electrical power: 5.5kW Installation dimensions of the machine in cm: Width: 240 Lenght: 340 Height: 250 Hedpfx Ajg Swz Hemgon Delivery time: after advanced payment, the machine is generally refurbished and ready for delivery

Condition: not inspected (used), Year of construction: 1984, 1 milling unit 2.8/3.5 kW nominal current 6,4/9,3 A workpiece thickness max. 130 mm Hodpsga Tu Djfx Amgen Lateral table for routing work

Year of construction: 2000, condition: like new (used), functionality: fully functional, Laroche Airlay carding machine for short fiber layering. It produces layers for needling or thermal bonding for upholstery, underlays, insulation, and automotive applications. In practice, on your production line, the 2,400 mm working width covers bedding, felt, and geotextile formats without prior cutting. The integrated weighing table stabilizes the basis weight continuously, and the installed power of 51 kW maintains the production rate with dense fibers. Detailed product description: The Laroche textile machine for layering non-woven fibers. Hedpfx Amsy Urmljgon Designed for layering short and coarse fibers, this Laroche Airlay carding machine forms layers for needling or thermal bonding. It is suitable for upholstery, underlays, thermal and acoustic insulation felts, automotive carpets, and agricultural geotextiles. In reality, a well-maintained used machine provides real production flexibility across several markets without multiplying changeover operations. Production characteristics and weight control: The 2,400 mm working width covers standard bedding, insulation, and geotextile formats, with less trimming required at the output. What truly changes in production is the integrated weighing table: it allows for quick correction of basis weight variations and limits waste at startup and during steady-state operation. The installed power of 51 kW supports the line when the material load becomes irregular or denser. The speed of up to 10 m/min is adjusted according to the layer weight and the type of fibers, which allows for a balanced approach between hourly output and layer uniformity. Production versatility and textile recycling: The adjustable layer weight of 500 to 1,500 g/m² covers lightweight underlays, heavier insulation felts, and upholstery items. In practice, on your production line, this range avoids dedicating a machine to each product family and reduces internal transfers. The machine accepts both natural and recycled fibers. On a non-woven line, I prefer this type of carding machine when it is necessary to absorb variations in raw materials while maintaining a usable layer before consolidation. Textile and non-woven sectors covered by this carding machine: This carding machine meets the needs of upholstery and bedding, underlays for footwear and clothing, thermal and acoustic insulation felts, automotive carpets, and agricultural geotextiles. First and foremost, it is important to verify the compatibility between your fiber mix, your target basis weight, and the expected uniformity downstream. The 2,400 mm width and the adjustable layer weight make it a suitable piece of equipment for a workshop seeking versatility without complicating operations. What the technical data sheet does not say is that this type of configuration also simplifies medium-sized production runs when switching from one application to another with minimal downtime.

Condition: as good as new (ex-display), The Plasma-Jet AirPro Compact 1530 Maxpro is a state-of-the-art plasma cutting machine designed for the Plasma Cutting Machines category, offering exceptional performance within the compact product group. Built for efficiency and reliability, this system features a one-piece design that ensures easy transport and rapid setup, ideal for custom and small-series manufacturing environments. With a cutting length of 3,050 mm and a width of 1,550 mm, the machine can handle substantial cutting tasks while minimizing operating costs. It comes configured with high-performance features such as a powerful MAXPRO 200 plasma source, an intuitive PULSER 3 CNC unit, and professional ProNest LT nesting software. The machine utilizes EtherCAT technology for optimal CNC performance, while the robust linear guides provide accurate, long-lasting operation. In addition, a built-in collision guard protects against damage, and a magnetic coupling allows for quick maintenance. Invest in your workshop's capabilities today by requesting a quote for the Plasma-Jet AirPro Compact 1530 Maxpro – a precise solution in the Plasma Cutting Machines product group. Hsdjyg Dg Tjpfx Amgon

Condition: excellent (used), Edge Banding Machine HEBROCK K36 Airtronic -used- - PC control with display - Touchscreen - Swiveling control panel - Program memory - Automatic pressure bridge adjustment - Feed via transport chain - Extendable workpiece support - Motorized adjustable infeed fence - Diamond jointing cutter, both with and against feed direction - Quick heating gluepot - Gluepot change system - Suitable for PUR adhesives - Cross-cut saw with HF motor - Flush milling unit - Flush, radius, and chamfer milling unit - Pneumatic changeover of milling unit - Multi-milling tool - Multi-radius scraper blade - Chip collection box for radius scraper blade - Air jet nozzle at the radius scraper - Flat scraper blade Hodpjymyp Rofx Amgen - Air jet nozzle at the flat scraper - Exchangeable motor for corner rounding - Spray device for separator agent - Spray device for cleaning agent - Spray device for antistatic coolant - Spray device for lubricant - LED lighting in the machine area - Exchange gluepots - Zero Joint Airtronic System ----- Technical Data ----- - Edge thickness, coil material: 0.5-3 mm - Max. edge thickness for corner rounding: 3 mm - Workpiece thickness: 8-60 mm - Workpiece thickness for corner rounding: 45 mm - Min. workpiece length: 200 mm - Feed speed: 7-10 m/min - Support plate Ø for edge material: 850 mm - Guillotine for coil material up to: 3 mm - Jointing cutter power: 2x2.2 kW - Cross-cut saw power: 0.37 kW - Milling station power: 2x0.37 kW - Corner rounding unit power: 0.37 kW - Buffing unit power: 2x0.18 kW - Extraction port Ø jointing unit: 60 mm - Compressed air connection: 7 bar - Total length: 5,540 mm - Dimensions (LxWxH): 5,540x1,210x1,450 mm - Weight: 1,700 kg Quality Information: - All settings checked - Complete basic inspection - Complete basic cleaning - Electrical system checked - Pneumatics checked - Immediately ready for operation

Condition: like new (used), Year of construction: 2015, functionality: fully functional, HP Indigo Press 7800 The machine is in excellent condition, still installed, and currently in operation. It can be inspected under production conditions by appointment. According to the current owner, there are no outstanding technical issues, and the machine is fully up to date. Hjdezacdwepfx Amgon Machine details: Manufacturer: HP Indigo Model: HP Indigo Press 7800 Serial number: IL 47000146 Year of manufacture: February 2015 Impression counter: approx. 19.7 million impressions, as of June 2025 Number of authorized colors: 7 Number of installed colors: 7 White ink authorized: Yes Machine still in production: Yes Availability: immediately, but not urgent Configuration and features: • 7-color configuration • White ink authorized • Thick substrate kit • One-Shot technology • Inline spectrophotometer • OFIR kit • Spare Ink Tank S3 • Chiller unit • UPS system • HP service contract • HP Production Pro for Indigo IN100T Digital Front End Hardware • HP Indigo Z4 G4 2133 V2 Control PC • HP Software Version 16.2.2 Technical and optical condition: The machine is reported to be in very good condition. According to the seller, there are currently no outstanding technical issues. The machine is fully maintained and up to date. In 2023, the entire material path was renewed/replaced, from the feeder to the stacker. This is a very important value factor, as the material transport section is one of the most relevant areas for stable and reliable production.

Condition: like new (used), functionality: fully functional, Stringer milling device SCHEER TW 4 + Router HM 16 Everything is in excellent, like-new optical and technical condition, the device has been used very little. Fully functional—ready to use immediately. All machines are intended for commercial use, no DIY store scrap. Treppenwangenfräsgerät SCHEER TW 4 With this device, you can mill treads and risers very precisely and accurately. The hand crank even allows you to machine curved joint surfaces; you can also use it for recesses in other panel materials, such as worktops. Equipped with hardened guide rods, on which the cross support with router is mounted. Featuring ball bearing guide bushings, allowing the device to move very easily, accurately, and safely. The device can be clamped securely onto the stringer or similar workpieces using four screw clamps. Hedoyxr T Topfx Amgsn The cross support has two stops each in both the longitudinal and transverse directions. Comes with two positioning angles. Complete with manual, tooling, and all accessories. Longitudinal milling travel: 750 mm; transverse milling travel has been increased from 75 mm to 320 mm, significantly expanding the machine's application range. To increase the milling travel, a new base frame made of aluminum profiles was manufactured. The modification work was carried out by a reputable engineering company. Everything works perfectly; this machine is a true one-off. Router SCHEER HM 16 Very good condition, with only minor signs of use. Very robust, thanks to triple-bearing router spindle. Accurate concentricity and flawless milling results. Precise column guidance and torsion-resistant milling table. Constant speed, even under heavy load. Equipped with high-performance motor (shows almost no signs of fatigue). Long service life thanks to soft start (full-wave electronics). Bearings are in good condition. The machine is suitable for the toughest continuous milling operations. Good visibility of the milling spindle; chips are blown away by a powerful fan. 220V, 1800W. Speed: 18,000 rpm. Fully functional. With M16 female thread mount.

Condition: used, Max. cutting length: 1050 mm Max. sheet thickness: 3 mm steel Motorized rear stop up to 1000 mm with fine adjustment via handwheel Hedpfx Amoqmvlrjgsn Crown angle adjustment knife sharpened operation manual Weight: approx. 1400 kg

Condition: refurbished (used), Lower and upper drill, tiltable, for chair seats of Old America type or similar products no. 4 independent lower groups, tiltable Hjdpfoytr Edox Amgsn No. 2 upper vertical oscillating groups

Condition: excellent (used), Year of construction: 1998, Frame dowel and slot mortising machine from Hofmann HT 200 U with angle adjustment Specialized drilling machine for stair construction, window manufacturing, and universal applications thanks to pneumatic height adjustment. Angled doweling and baluster/rail drilling are easily possible due to the swiveling drilling unit. Motor with pole-change switch, two speeds Motor output 1.5 / 1.8 kW, 1400 / 2800 rpm Motor can be started via a practical handle switch Precision drill chuck with two inserts: 16 mm and M10 thread Table size approx. 1100 x 240 mm Linear laser for precise workpiece positioning Drilling unit can be rotated 65 degrees to the left and right Pneumatic adjustment of working height, allows doweling on two levels without repositioning Desired drilling heights for each drilling level can be set with a handwheel and digital counter; switching between levels is pneumatic and is operated from the front Cross adjustment approx. 320 mm, stepless or in a 12 mm grid Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, positionable at the front and back of the table 2 swiveling workpiece supports 2 side stops, can also be used as front support Mobile base Extraction port 80 mm 4 used but good drills: 9, 12, 16, 19 mm Few touch-ups on the paint, excellent condition, see original photos A used swiveling slot mortising machine in this condition is very rarely available. CE mark Operating manual Dimensions: approx. 1200 x 1200 x 1200 mm (LxWxH), weight 310 kg. Hodpfx Amjyfta Tsgen The machine can be demonstrated at our premises by appointment. We only offer machines that are ready for demonstration and available in our warehouse – see “more offers from this supplier.”

Year of construction: 2014, condition: excellent (used), mentioned price is for the loose model Hsdjgg Sy Eopfx Amgsn Minipkr with bin and sensor = 400 eur machines are checked and in working condition

Condition: new, Year of construction: 2025, functionality: fully functional, Stair milling machine for mortising treads and risers into stringers and posts. The machine is equipped with a high-frequency milling motor. The machine is brand new. 400 V, 50 Hz. Hsdpfjyxzacox Amgen

Condition: good (used), Year of construction: 1998, Universally applicable frame dowel and slot drilling machine with angle adjustment Especially designed for stair construction, window manufacturing, and versatile applications thanks to pneumatic height adjustment. Angled dowelling and spindle drillings, such as for balusters, can be easily accomplished with the swiveling drilling unit. Motor with pole switching, two speeds Motor power: 1.0 / 1.5 kW, 1400 and 2800 rpm Motor start via convenient handle switch Equipped with Röhm two-jaw chuck, 1 - 20 mm Linear laser for precise workpiece positioning Drilling unit can swivel 65 degrees left and right Pneumatic adjustment of working height allows dowelling on two levels without repositioning. Desired drilling heights can be set for each drilling level via digital counter, switching between levels is pneumatic and operated from the front Cross adjustment 340 mm, infinitely variable or in 12 mm increments via indexing rail Pneumatic clamping possible at any point, operated from the front Maximum height adjustment approx. 100 mm above table height Drilling stroke approx. 200 mm 2 pneumatic workpiece clamps, 1 clamping column repositionable to the front Hsdexmatnjpfx Amgon 2 swiveling workpiece supports Extraction funnel Central stop + 1 side stop Fixed mitre stop Length stop as round rod Assorted drill bits Operating manual CE mark Machine was partly repainted due to paint splashes. Pneumatic hoses replaced Dimensions: approx. 1200 x 1350 x 1600 mm (LxWxH), weight 380 kg. The machine can be viewed and demonstrated at our premises by appointment. We only offer machines that are ready for demonstration in our warehouse, see "more offers from this seller."

Condition: good (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Mr.: Simon Blank Steel stairs / Machine steps used Floor height : ca. 515 mm projection : ca. 590 mm total width : ca. 700 mm mesh size : approx. 25 x 25 mm material color : yellow Step dim.: 1x approx. 675 x 250 mm ( upper step ) 1x approx. 475 x 250 mm ( lower steps) Number of steps: 2 pieces / steps inserted step height : approx. 265 mm General information about the article: This item is offered for pickup only. A transport desired beyond that or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Hedpfxohhxu Hj Amgon Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading

Condition: used, NEW BUTTER EXTRUDERS AND SHAPING MACHINES BUILT BY New Butter Extruder and Shaping Machines By Butter Extruder and Shaping Machine Butter Extruder Semi - Automatic Butter Extruder, Shaping and Cutting Machine fited on full stainless steel frame, Control panel. Two Stainless steel screw augers, stainless steel hopper. Cutting wires on outfeed conveyor making the machine user friendly . Extruding, Shaping and Cutting Machine Emergency Stop Button. Condition :New Mould Samples TECAFORM AH Blue Our New Special Designed Extruding Outlets TECAFORM AH Blue meets all applicable requirements for declaration of Food Contact. European regiulation EC 10/2011 and Ammednments European Regulation EC 1935/2004 Council Regulation EC 2023/2006 (GMP) FDA §21 CFR 177.2470 We use High Quality Parts Uses High Quality parts on the new range of DMUK EXSH 1 by Adding Certified Reducers, Stainless Steel Parts and Bestspoke Control Parts. Machine Design and Construction. Having Expirienced Engineers and Designers Working on a Full Range of Work Shop Machinery, CNC, Plasma Cutters, Moulding Machines we Provide High End Quality and Competitive Lead Times. Usage: Butter and Various Viscous Pastes Construction: Fully Stainless steel and Glass Blasted to provide the finish on the metal and harden the surface. Shapes and sizes: Choose your own shpe and size Volumes: Depending on Model we can offer machines for 50g Up to 25Kg Blocks in Boxes. Hopper volumes on extruders: 18 Litres and 50Litres Control panel: Butter Working Switch, Butter Extruding Switch, Start/Stop and Hjdourulpopfx Amgsn Safety: Machine is Equiped with Stainless Steel Cover that Brings The Machine To a Stop If This is Opened. Cutting: Cutting Wires come down manualy and bring the machine to a Stop Out feed: Out Feed Conveyor is Built with Stainless Steel Rollers that help the Prodcut Slide Out Avoiding any Sticking and Changing The Prodcut Shape. Electricity: This Machine can work on Single Phase 220v /50hz , 3Phase 400v / 50hz and US Electrics on 60hz. Choose on Order. Lead time: 5weeks Warranty: 12 months Spare parts: Dairy Machinery UK Finance Available: Pay Monthly, Ask For A Quote

Condition: used, Steel stairs, external stairs, machine stairs, machine ascent, extension stairs -Machine stairs: stable design, as machine access -Material: VA -Step height: approx. 310 mm -Height: upper step approx. 1680 mm -Transportation dimensions.: 1770/535/H190 mm -Weight: 29 kg Hodpfsiay Hdex Amgon

Condition: good (used), Steel staircase, machine staircase, machine access, machine platform, work platform, transition -Machine stairs: 4-step transition -Step size: approx. 600 x 260 mm -Height: Platform 945 mm -Platform railings: both sides -Dimensions: 1830/810/H1950 mm Hedpfxowma Sms Amgjn -Weight: 53 kg

Condition: good (used), Steel staircase, external staircase, machine staircase, machine access, extension staircase, machine platform -Manufacturer: Günzburger, Machine stairs, Machine access -Step size: approx. 600 x 260 mm -Height: upper step 685 mm -Permissible load: 200 kg -Number: 1x staircase available -Dimensions: 650/980/H210 mm -Weight: 14 kg Hedpfx Ajikwgnemgen

Condition: good (used), Steel staircase, external staircase, machine staircase, machine access, extension staircase, machine platform Hsdpjwubz Ejfx Amgsn -Machine stairs: machine access -Step size: approx. 1050 x 260 mm -Height: upper step 610 mm -permissible load: kg -Transport dimensions: 1070/950/H205 mm -Weight: 52 kg

Condition: used, Steel stairs, external stairs, machine stairs, machine steps, add-on stairs Hodpfxef Sl T He Amgjn -Design: stable design, as a machine step -Step sizes: 500 x 300 mm -Height: upper step 320 mm -Dimensions: 760/590/H400 mm -Weight: 56 kg

Condition: refurbished (used), Year of construction: 2004, functionality: fully functional, SELECT 20800 step milling machine for recessing treads and risers into stair stringers and posts. The machine features stops for tread length, tread thickness, riser length, riser thickness, and projection dimension. In a single clamping, one tread and one riser can be milled in approximately 1 minute. Clamping the workpiece takes just one second. This machine is the ideal solution for professional staircase manufacturers. Voltage: 3-phase, 400 V. Maximum clamping height: 300 mm. Hsdpjwut Abefx Amgjn

Condition: refurbished (used), Year of construction: 2001, functionality: fully functional, Stair milling machine SELECT 20300. Simply, quickly and precisely mortise steps and risers into stair stringers and posts. Hjdpfjv H D Tvox Amgjn You can adjust the step length, step thickness, riser thickness, tread height and step nose. The machine has been completely overhauled and is technically in mint condition. Newly painted.