Used Lenze Gss04-2M Sar 07- -B for sale (42,156)

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, operating hours: 3,550 h, Good day, Pgjdpovl Hcwofx Ag Dok We hereby offer you, without obligation, a used cable rewinding system (cable drum rewinding machine) with length measuring device, suitable for commissioning and winding cables onto drums of different diameters. Manufacturer: Jakub Thaler GmbH, Germany Model: KU-07 KKS Measuring Device Type: ME01 Year of Manufacture: 2019 Operating Hours: only 3,550 hours Load Capacity: 10,000 kg Applicable Cable Diameter: 10 – 80 mm Measurement Accuracy: +/- 0.5% Min. Drum Diameter: 500 mm Max. Drum Diameter: 2,800 mm Max. Drum Width: 1,750 mm Drive Power: 5.5 kW Rewinding Speed: 1 – 85 m/min. Note: The above technical data is taken from the operating manual, manufacturer brochures or other sources for which we cannot guarantee accuracy or completeness. Scope of Delivery: - Cable drum pay-off unit - Layering stand with length measuring device - Cable drum take-up unit with hydraulic power pack - Operator control panel - Machine documentation (available in German only) Application Area and Condition: The system is suitable for rewinding (spooling) power cables, communication cables, and data cables from drum to drum. Cable length is measured during the winding process. The system was operational until the end of 2024, is fully functional and in good condition. We would be pleased if this machine meets your interest. Your Mertens & Frowein GmbH Service Team

Condition: excellent (used), Year of construction: 2011, machine/vehicle number: WIL134, Demag EPKE Overhead Crane Gantry Crane Bridge Crane incl. Steel Structure + Pendant Control Steel Structure Dimensions approx.: Length 44m x Width 11.2m, with 1x bridge crane 2,500kg Lifting height 6m, lifting speed 0.8/4.5m/min, reeving 4/1 Payload/Lifting Capacity: 2.5t - 2,500kg Pgsdpfx Agew Ixz Us Dok Technical Data of the System: Crane runway/steel construction consisting of HEA/HEB180/240 beams, running rails HEB280 Length outer edge steel structure: approx. 44m Total width outer edge (steel structure): approx. 11.2m Overall crane height: approx. 5.2m Top of rail: approx. 4.87m Bottom of rail: approx. 4.59m Top of bridge: approx. 4.52m Bottom of bridge: approx. 4.83m Hook height: approx. 4.3m Crane gauge: approx. 10.8m Column spacing: to be advised Some columns are partially set in concrete; these will be cut 5cm below the top edge of the floor! System is supplied complete: Steel structure fully assembled incl. conductor rail 1x bridge incl. travel drives and hoist Demag DR 2.5t NL Crane is dismantled and immediately available. The item is located at 75053 Gondelsheim Very good condition, see pictures Shipping by freight carrier or self-collection by appointment only.

Condition: used, maximum load weight: 29,622 kg, overall weight: 36,000 kg, axle configuration: 3 axles, first registration: 07/2020, next inspection (TÜV): 07/2026, Equipment: ABS, Schmitz Cargobull SCB?S3T semi-trailer, sliding curtain, sliding roof, lift axle, aluminium slats, roadworthy (inspection valid until 07/2026), tyres: 1st axle approx. 20 - 30%, 2nd axle approx. 80%, 3rd axle approx. 20 - 30%. Austrian semi-trailer in very good condition. Unladen weight: 6,378 kg. Chassis no.: WSM0000033122. Contact: Ivelina Redl (Russian, Bulgarian, Serbian, English, German) Tel., errors and prior sale excepted! Pjdpfx Agoyihn Ds Degk

Condition: used, axle configuration: 3 axles, first registration: 03/2011, color: other, Year of construction: 2011, Empty weight: 7.310 kg Axle 1: left 10 mm right 10 mm Axle 2: left 10 mm right 10 mm Axle 3: left 10 mm right10 mm Podpfxexywuis Ag Dsgk

Condition: used, axle configuration: 3 axles, first registration: 03/2011, color: other, Year of construction: 2011, Empty weight: 7.865 kg Axle 1: left 8 mm right 8 mm Axle 2: left10 mm right10 mm Podpfx Aoxqxq Hjg Dogk Axle 3: left 8 mm right 8 mm

Condition: new, Year of construction: 2025, Sheet metal folder RED PLUS 2200/0.8 incl. foot flapping By applying the hinges and the foot opening the capabilities have been enhanced. And the machine lets for even more accurate work. Technical details: max. working length: 2200 mm bending capacity: 0,8 mm (steel) 1,2 mm (aluminum, zinc and copper) bending angle: max. 140 degrees thickness of bending bar: 15 mm Pgedpfx Agjcb H Exe Dek passage: 130 mm Foot flapping to open and close the bending bar Price: 2600 Euro Shipping costs: its dependent on destination point, please ask us, we check Your total shipping costs. Our folding machine RED Plus has to open and close the upper bar a foot flapping. It cans therefore turn to each tool position and you do not ever engage the clamping lever on the right site of the machine. This increases both the accuracy and speed, as well as during positioning of the workpiece at the bending edge. Angle stop for constant bending angle  Weight: 270 kg Dimensions L x W x H: 2450 x 900 x 1100 mm Warrenty 12 months Certificate CE  

Condition: new, Year of construction: 2025, Manual segment bending machine 2 meter working width The SGR model is equipped with segmented bending tools on the three beam elements: upper, lower and bending beam. Sheet metal can be bent on all sides and, for example, complex box shapes or workpieces with bending legs up and down can be produced. Multi-use, powerful, heavy and very solid segment folding bench - this is not a typical folding bench - much stronger and more robust. A segment folding machine is characterized by full segmentation over the entire working length of 2 meters. Upper and lower segments can be removed easily and quickly and the bending beam is divided into segments. The bending angle is from 0 to 160 degrees. Lock with the pedal, your hands are free and you can easily position the sheet metal - open and close with your foot. The bending beam is connected to 2 gas pressure dampers, so controlling the bending beam is incredibly easy. At the rear of the machine 2 practical tool boxes for segments or tools. Technical specifications: - maximum working width; 2050mm - Bending angle max. 160 degrees - max. sheet thickness (steel) 1.2mm - Weight 600kg - segment jaw width 30,40,50,60,70 and 100mm - three cheeks are equipped with segment jaws (full segmentation) -Stop for preset bending angles Pgodpfx Aehunv Isg Djk -degree scale passage 100mm castors incl. Delivery date: every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT (polish invoice).

Condition: new, Year of construction: 2025, Timely delivery, trustworthy equipment ! Bending machine from the only and reliable manufacturer PROD MASZ® High-precision folding machine for steel, copper, zinc and aluminum sheets. These press brakes and all common spare parts are available from stock. Folding bench RED-2200/0.8 incl. transport rollers Bending machine Folding bench with side cutouts for bending from top to bottom. Thanks to him you will finish your window sill. In the machine construction there is a place for curved processing at a height of 6 cm up and down. It is a modern sheet metal bending machine that bends sheet metal from three sides. Technical specifications: - maximum working width: 2080 mm - Bending performance: up to 0.8 mm (steel sheet) - all non-ferrous metals 30% more bending capacity - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 m - lifting of the upper beam in three positions - Upper beam stroke: 80 mm degree scale angle stop rear rack for holding the sheet metal front depth stops - Weight: about 250 kg The roller scissors (max. cutting capacity 0.8 mm / steel) Roller scissors 0.8mm - plus 350 euros Manual folding machine plus 75 euros The machine complies with CE guidelines and has a 12-month guarantee. Price: 2200 euros Delivery date: every week We are looking forward to your contact! Pgodpfxscv S Dts Ag Djk Invoices are issued with 0% as intra-community delivery or with plus 23% of VAT.

Condition: used, mileage: 356,048 km, power: 300 kW (407.89 HP), first registration: 08/2008, fuel type: diesel, overall weight: 33,000 kg, axle configuration: > 3 axles, next inspection (TÜV): 01/2025, color: white, gearing type: semi-automatic, emission class: euro4, Equipment: ABS, air conditioning, * ABS * ASR * Radio * On-board computer * Rear view camera * Cruise control * Hill start assist * Electric windows * Electric mirrors adjustable * Heated mirrors * Central locking * Fog lights * Roof hatch * Rear window * Driver's air seat * Longitudinal and transverse locks * AP axles Podpfjw A Tz Tex Ag Dogk * Steel bumper * Air dryer * Alloy rims * Orange rotating beacon * 16-speed * Suspension: leaf * Continuous brake: engine brake ----Structure: Putzmeister concrete pump BSF 42-5.16HLS, max. delivery pressure 85 bar, max. delivery capacity 160 m³/h, distribution boom M42-5, Z-fold, 5 arms, reach height max. 42 mtr, reach max. 38 mtr, reach depth max. 29.5 mtr, unfolding height 8.6 mtr, length of end hose 4 mtr/DN 125, delivery line (pipe DN) 125mm, radio remote control + cable remote control, fully hydraulic 4-point Support, central lubrication. Operating hours read: 5,581 h Sale only to commercial customers. ONLY THE NET PRICE IS TO BE PAYED FOR EXPORT !!!!! ALL INFORMATION IS PROVIDED WITHOUT GUARANTEE FOR EQUIPMENT AND ACCESSORIES. Our general terms and conditions form the basis of all purchase contracts, invoices, pro forma invoices, orders and sales discussions (see legal notice).

Condition: used, Drum heater, electric heater, electric radiator, heating coil, electric tubular heater, heating element, heating drum -Handover: in the current condition as viewed -Connection cable: damaged, see photos Podpfxexm Rpto Ag Djgk -Drum heater: Type designation 1082 105 BHT 932 07/20 -Shaft: Ø 40 x 40 mm -Dimensions: Ø 180 x 760 mm -Weight: 49 kg

Condition: used, Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer gearbox: ZAE geared motor with brake -Gear: Type M 50 B i = 40 : 1 -Speed: 7/70 rpm -Motor: Kobold type PO619-3-16/2MB -Power: 0,04/0.55 kW / 280 /2800 rpm -Shaft: Ø 20 x 25 mm / 23 x 48 mm -Protection class: IP44 -Brake: 8 Nm -fan motor -Dimensions: 610/195/H183 mm Pgodsmrxanepfx Ag Dok -Weight: 26 kg

Condition: excellent (used), Broaching tool, broaching needle, special tool, grooving tool, keyseating machine, keyway broaching machine, keyway broaching machine, keyway broaching tool, broaching needle -Manufacturer: SWZ, broach push broach -Type: B 6 J9x1.8 RL 24-72mm -Item no.: 45 0014 Pgodpeitt Ryefx Ag Dek -Width: 6mm -Number: 2x broach available -Price per piece -Total dimensions: 900/6/H13 mm -Weight: 0.5 kg/pc.

Condition: good (used), Year of construction: 2007, Automatic frame bending machine for spacer frames 8-20 mm / moulds and models. For aluminium and TGI. Max. frame dimensions: 2500 x 4000 mm Pgodpfxeu Sqhus Ag Djk Min. frame dimensions: 150 x 200 mm Magazine: 6 compartments manual. Running direction: left-right Height: 3000 mm Length: 11,050 mm Depth: approx. 120 mm

Condition: new, Year of construction: 2025, maximum working length 2140 mm sheet gauge up to 1,2 mm Pgodpfx Agjbntdms Dsk approx. weight of hand machine 300 kg shear cutting on the whole working length upper bar lifting in three positions maximum clearance between bars100 mm

Condition: new, Year of construction: 2025, Delivery every week - RELIABLE! Pgsdpfx Agob Hd Dls Djk Are you looking for a folding machine? You expect quality, reliability. You can rely on competent advice and accurate, punctual delivery by the well-established Prod-Masz team. Direct from the manufacturer! Folding machine 2140T/0.8 incl. transport wheels Technical specifications: - maximum working width: 2140 mm - Bending performance: up to 0.8 mm (steel sheet) - Titanium zinc sheet 0.8 mm, aluminum sheet 1.2 mm copper sheet 1.25 mm - Bending angle: max 145 degrees - the cut with the roller shears over the entire working width - Bending beam thickness: 15 mm - the cut with the roller shears over the entire working width - lifting of the upper beam in three positions - Upper beam stroke: 80 mm - degree scale - Weight: about 150 kg - The rotary shears (max. cutting capacity 0.8 mm / steel) + 350 euros - The machine complies with CE guidelines and has a 12-month guarantee. - transport wheels incl. Price: €1,350.00 Short delivery times! Ordered today - delivered next week! We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery).

Condition: new, Year of construction: 2025, Prod-Masz - your competent partner for metal, sheet metal and steel processing. We are constantly expanding our offer to meet the demands of the market. Thanks to many years of experience, highly qualified staff, high quality, aesthetics and reasonable prices, we gained the stable position in the market and the trust of customers. Absolute novelty from Prod-Masz! Bending beam only 15mm for sheet steel 1.2mm to 2m. Pgedpfx Agocch Eqs Dsk RED 2060 / 1.2mm incl. 2 levers for opening the bending beam Technical specifications: - maximum working width: 2060 mm - Bending performance: up to 1.2 mm (sheet steel) - All non-ferrous metals 30% more bending power - Bending angle: max. 160 degrees - The cut with the roller shears across the entire working width - Bending beam thickness: 15 mm - lifting the top beam in three positions - Upper cheek stroke: 80 mm Degree scale Angle stop rear frame for holding the sheet front depth stops - Weight: approx. 420 kg The roller shears (max. Cutting capacity 0.8 mm / steel) + 350 Euro The machine complies with the CE guidelines and has a 12-month guarantee. Delivery date: 2-4 days We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery)

Condition: new, Year of construction: 2025, We offer you a wide range of sheet metal bending machines and guillotine shears. What you can expect from us: fast and safe delivery without complications; competent advice and service during and after the guarantee. Promised. Advice, delivery or maintenance? It's a pleasure. For individual machines or entire packages? No problem. We know all of our devices inside and out. For years. And as a manufacturer, we are always up to date. We look forward to you. direct from the manufacturer Working length: 2140 mm CE Max sheet thickness: 0.8 mm (steel) titanium-zinc sheet 0.8 mm, aluminum sheet 1.2 mm, copper sheet 1.25 mm Bending angle 145 degrees (at the customer's request up to 165 degrees) Cutting along the entire working length Lift the upper cheek in three positions maximum clear width between the side panels 80 mm rear frame for holding sheet metal Pedpjcddnfsfx Ag Djgk Front cutting limiter to ensure the specified cutting width We are looking forward to your contact! We issue the invoices with 0% (intra-community delivery)

Condition: new, Year of construction: 2025, “Prod-Masz” your partner when it comes to bending. Our name stands for innovative products of the highest quality and reliability. Our bending machines impress with their special flexibility, performance and versatility. Pgedpfxjcgmgio Ag Djk Anyone who knows us knows that we are a reliable company :) BENDING MACHINE 2.14 m /1.2 mm Technical specifications: - maximum working width: 2140 mm - Bending capacity: up to 1.2 mm (steel sheet) - Bending angle: max 145 degrees - Bending beam thickness: 24 mm - lifting of the upper beam in three positions - Gas springs - Passage opening: 80 mm - degree scale angle stop rear rack for holding the sheet metal front depth stops - Weight: approx. 290 kg - The machine complies with CE guidelines and has a 12-month guarantee. Roller scissors 0.8mm plus 350 euros Price: €1,550 Delivery- every week We are looking forward to your contact! Invoices are issued with 0% as intra-community delivery or with plus 19% of VAT.

Condition: new, Rexroth Indramat MAC071C-0-JS-2-C/095-B-0 Permanent magnet motor , unused, 100% functional Psdpfx Aei D Nddjg Djgk

Condition: ready for operation (used), Agie Digital motor control DMC-01 B 626074.9, used, slight signs of wear, 100% functional Podpfei D Tvyex Ag Djgk

Condition: ready for operation (used), Fanuc A98L B / A04B-0807-D001 laser power sensor, used, good condition, 100% functional, scope of delivery as per photos Pgsdpomq H T Aefx Ag Dek

Condition: new, Balluff BTL01CM / BTL5-G11-M0200-B-S32 Micropulse displacement transducer, serial no. according to photo, unused in original packaging, 100% functional, scope of delivery according to photos Psdpfsi D T Edex Ag Degk

Condition: ready for operation (used), Rexroth MAC092B-0-QD-2-C/095-B-0 servo motor MNR: R911225307 SN: MAC092-607, used, good condition, 100% functional, scope of delivery as per photos Pedpfxeu H Snfs Ag Dogk

Condition: used, mileage: 199,999 km, power: 115 kW (156.36 HP), first registration: 06/2012, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, emission class: euro5, number of seats: 3, total length: 6,420 mm, total width: 2,550 mm, total height: 2,700 mm, loading space volume: 20 m³, loading space length: 4,220 mm, loading space width: 2,450 mm, loading space height: 1,900 mm, Year of construction: 2012, Equipment: ABS, soot filter, tail-lift, * Drop-side body, Ewers system * Dekra certified according to VDI 2700 ff and DIN EN 12642 Code XL * Cargo space dimensions: 4,220 x 2,450 x 1,900 mm * 4 rows of load securing rails * Lashing rings in outer frame * 1,500 kg Bär tail lift * Rear axle air suspension * Ball-type and towing eye trailer coupling with trailer air brake connection * Differential lock * 3 seats * 6-speed manual transmission * Euro 5, low noise ---- Special equipment: 2-line trailer brake, Ringfeder trailer coupling, 13-pin trailer socket, Audio system: Truckline CD 65 / 70 incl. CD drive, Rear axle differential lock, 100 A alternator, pneumatically operated engine brake, reinforced rear cross member, cab seats: driver’s seat hydraulically suspended, reinforced rear axle stabilizer, reinforced front axle stabilizer Additional equipment: Pgodpfjx Ix Hljx Ag Dek Emissions standard EURO 5, front axle load 2.5 t, heated exterior mirrors, 74 Ah battery, cab: single cab, suspension: leaf/air, 6-speed gearbox, power steering, body/chassis: chassis, fuel tank: 90 ltr., engine 4.3 ltr. - 115 kW diesel (OM 904 LA), rear fog lamp, wheelbase 3,700 mm, reversing lights, rear axle disc brakes, front axle disc brakes, cab seating: dual passenger seat, permitted gross vehicle weight 7.49 t

Condition: excellent (used), Linear drive, linear gearbox, lifting gearbox, spindle drive -Condition: unused, from warehouse clearance -Manufacturer: Festo -Type: DGP - 40 - 730 PPV - A - B -161782 W208 -P: max. 8 bar Psdpfx Aob A Iw Rog Dsgk -Number: 3 drives available Price: per piece -Weight: 7 kg/piece