Used Loher Pipe Pump, Screw Pump for sale (15,147)

Condition: good (used), Screw block for screw compressor, compressor, compressed air unit, stationary compressed air compressor, screw block, compressor, compressor stage -Manufacturer: Atlas Copco, screw block compressor stage from compressor type GA 408 Pack Fpedpfx Aoztx Anskhek -Screw block: Type GA 408 -Final pressure: max. 8 bar -Shaft: Ø 40 x 55 mm -Dimensions: 760/490/H500 mm -Weight: 160 kg

Condition: used, This listing is for the Autoclude Model V Peristaltic Pump Fpodpfoxhduxex Akhjk The unit is in full working condition and is ready for immediate use The Autoclude peristaltic pump is a type of tube (hose) pump made by Verderflex / Autoclude. Its defining feature is that only the flexible tube (or hose) inside the pump is in contact with the fluid being pumped. The rest of the pump (rollers, casing etc.) stay clean / isolated. This makes them good for contamination-critical, corrosive, slurry, or shear-sensitive fluids Design / Key Features Some of the design / functional features: Seal-less and valveless: Since fluid is contained within tube, no seals exposed to fluid or valves that could leak. Self-priming: Can start pumping without needing fluid completely filling the inlet, and often able to handle gas or ‘air’ in the line. Capable of running dry without damage (when tube material allows) for short durations. Electrolab Group Reversible flow: The rotor or drive can reverse, so flow can be reversed to purge lines, etc. Gentle pumping: Because fluid only contacts tube, and the shearing is limited, better for shear-sensitive liquids / slurries. Rapid tube replacement Stackable / multi‑head options: Some “easy tube loading” models allow several pump heads to be driven by a single drive unit, for multi‑channel or sampling/analysis setups

Condition: good (used), functionality: fully functional, power: 250 kW (339.91 HP), Description: Screw compressor ZR 4-52 with drum dryer Characteristics: Capacity 8.00 bar Power 250 kW Voltage 500 V Fpodovyrlaspfx Akhsk Air flow rate l/min 634 Running hours at last maintenance: 50307

Condition: good (used), functionality: fully functional, Description: Screw compressor with drum dryer ZR 250 1997 Characteristics: Capacity 7.50 bar Power 245 kW Voltage 500 V Fedpovyrtdsfx Akhopk

Condition: like new (used), functionality: fully functional, power: 250 kW (339.91 HP), fuel type: diesel, operating hours: 615 h, Complete firepack installation supplied by Van Wijk & Boersma Firpacks (NLD). The entire system comprises two diesel firepacks, each configured to deliver 700 m3/h at 8 bar in accordance with NFPA-20 regulations. An electrical control panel, type WB 882-D20, is installed in compliance with NFPA standards and includes a pressure switch. Each unit features a double-walled fuel tank with a capacity of 600 liters. Fodpfsxdlmhsx Akhepk • Engine brand: Scania • Engine type: DI-9-48A 10-14 • Pump brand: Aurora • Pump type: 8-481-17B • Year of manufacture: 2004 CHARACTERISTICS (per unit) • Pump capacity: max. 1050 m3/h • Pump pressure: max. 9.4 bar • Engine power: 250 kW • RPM: 2050 • Operating hours: 460 – 615 hours

Condition: good (used), functionality: fully functional, Description: Screw compressor ZR 250 1998 Characteristics: Capacity 7.50 bar Fjdpfx Ajvyrq Aokhopk Power 245 kW Voltage 500 V

Condition: good (used), Year of construction: 2001, functionality: fully functional, power: 305 kW (414.68 HP), Description: Screw compressor with drum dryer ZR315VSD Fpjdpfx Asvyq Tpjkhek Characteristics: Capacity 8.60 bar Power 305 kW Voltage 500 V Running hours at last maintenance: 46383

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 382 kW (519.37 HP), Description: Screw compressor ZR315VSD Characteristics: Capacity 8.60 bar Fpedovyq Rnopfx Akhsk Power 382 kW Voltage 400 V or 500 V Running hours at last maintenance: 7270

Condition: like new (used), New Nash SC 7 vacuum pump Fpjdpfx Akjxft Shohok

Condition: refurbished (used), functionality: fully functional, Heavy duty ball valve pump Bottom ported Capacity: max. 988 LPM Solids handling: max. 22 mm Discharge pressure: max. 8.6 bar Fjdpfx Akox Tqahshepk Displacement per stroke: 6.81 liter Connection style: 3" 125# ANSI Pipe size: 80 mm

Condition: like new (used), functionality: fully functional, New Nash CL1003 vacuum pump Fodpfxjxdahmo Akhepk

Condition: new, Year of construction: 2023, DEPA DH50-FA-1NN II 2GD Ex h IIB T6 .. T4 GbDb Fpsdpjx Sxhqefx Akhek

Condition: good (used), Year of construction: 2002, operating hours: 39,000 h, overall weight: 532 kg, total length: 1,285 mm, total width: 920 mm, total height: 1,050 mm, power: 18.5 kW (25.15 HP), volume flow: 156.6 m³/h, pressure (max.): 10 bar, noise level: 68 dB, Equipment: documentation/manual, type plate available, Very well-maintained Ingersoll Rand screw compressor, in excellent technical and visual condition. Fully serviced and ready for immediate use. New hour meter installed. 18.5 kW, 2.61 m³/min, 10 Bar. Fedpoztl Udofx Akhjpk

Condition: used, axle configuration: 3 axles, first registration: 07/2018, total length: 13,540 mm, total width: 2,550 mm, total height: 3,650 mm, suspension: air, tire size: 385/65 R22,5, Year of construction: 2018, Equipment: ABS, = Additional Options and Accessories = - Air suspension = Further Information = Tire size: 385/65 R22.5 Axle brand: Mercedes Suspension: Air suspension Fpodpfeztnxfsx Akhjk Rear axle 1: Lift axle Unladen weight: 7,820 kg Dump truck: Left-hand side / Rear

Condition: new, Year of construction: 2022, Compact screw compressor,new original packed Fpsdpfxjztz Ads Akhsk Displacement (2900rpm/50hz) 410m3/h Motor input: 110KW Max.operating current: 182a 380-425V/3/50hz Star connection for R134a: Kältemittel R134a Evaporating temp. to +5 °C → po = 3,50 bar (abs.) Condensing temp. tc +50 °C → pc = 13,18 bar (abs.) Cooling cap. = 232 KW (68 refr.tons)

Condition: refurbished (used), Year of construction: 2002, functionality: fully functional, screw diameter: 172 mm, rotational speed (max.): 49 rpm, In recent years, over €420,000 have been invested in new components and factory refurbishments! Further technical details can be found in the attached documentation. TECHNICAL DETAILS Screw diameter: 172 mm Screw speed: 4.9 - 49 rpm Max. torque: 17,500 Nm MACHINE DETAILS Main motor: 216 kW Gearbox manufacturer: P.I.V Coperion DSE 180 TECHNICAL DETAILS Power: 7.5 kW Output torque: 280 Nm Degassing chamber: 1 Screw housing bore: Ø 181.5 mm Screw diameter: 180 mm Pressure build-up (axial pressure on the screw shaft): max. 25 bar EQUIPMENT Double screw degassing unit Coperion DSE 180, year 2021 Main gearbox P.I.V, year 2002, factory refurbished in 2021, unused Main gearbox P.I.V, year 1986, factory refurbished in 2016, in operation 2021 - 2023 Main motors Siemens, 212 kW, year 2002, factory refurbished in 2020, unused Main motors Siemens, 212 kW, year 1986, factory refurbished in 2015, in operation 2020 - 2023 Screw housings, 16 various, new and used Screw shafts, 2 x approx. 4,600 mm Supports Screw tips Thrust discs Fedpfx Ajztu Dbokhepk Note: The electrical and control technology as well as the screw segments are not included in the scope of delivery.

Condition: used, This listing is for a QuattroFlow QF150 Diaphragm Pump. The unit is in full working condition and is ready for immediate release. The Quattroflow 150S is a 4-piston Diaphragm pump, which is mainly used to pump water-like fluids that are typically handled in research-, pilot plant- or production facilities of the pharmaceutical, biotech,food or cosmetic research centres or plants Examples: • Solutions containing proteins (albumin, IgG, Clotting factors, monoclonal antibodies, enzymes, vaccines.) • Solutions of polymers or suspensions (silicon, latex, chromatography media) • Cell suspensions (bacteria, yeast, algae, fungi, mammalian cells) Fodpexx Avpjfx Akhepk • colloidal solutions • Suspensions of viruses or phage • Dairy products • Gelatine • Supplements and ingredients for cosmetic and food Flow rate max.: Eccentric shaft 3° l/h (lpm) 100 (1.67) 100 (1.67) Eccentric shaft 5° l/h (lpm) 180 (3) 180 (3) Flow rate min.: Eccentric shaft 3° l/h (lpm) 1 (0.017) 1 (0.017) Eccentric shaft 5° l/h (lpm) 1 (0.017) 1 (0.017) Pressure: Temperature of fluid < 40°C bar (psi) 6 (87) 6 (87) Temperature of fluid > 40°C bar (psi) 4 (58) 4 (58) Temperature max.: Fluid °C (°F) 80 (176) 80 (176) CIP °C (°F) 90 (194) 90 (194) SIP °C (°F) 130 (260) 130 (260) Autoclave °C (°F) 130 (260) 130 (260) Suction lift dry at: 3000 rpm 3000 rpm Eccentric shaft 3° m (ft) 1-1,5 (3.2-4.9) 1-1,5 (3.2-4.9) Eccentric shaft 5° m (ft) 2-3 (6.6-9.8) 2-3 (6.6-9.8) Volume specifications: Approximated volume per revolution at free output ml 0,72 (3°) 1,2 (5°) 0,72 (3°) 1,2 (5°) Filling volume without connectors ml 15 15 Residual volume (after idle with highspeed motor) ml 1-3 1-3 Product wetted surface (approx.) cm² (inch²) 112 (17) 112 (17) Speed range pump rpm 10-3000 10-3000 Connection specification inlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm (inch) 25 25 Internal diameter mm (inch) 4,7 4,7 Connection specification outlet (standard) Connector " 1/4" TC 1/4" TC Flange diameter mm 25 25 Internal diameter mm (inch) 4,7 (0.19) 4,7 (0.19) Position of connectors Inline Inline Number of flow directions 4 4 Diameter drive shaft mm 7 7 Product wetted materials (standard): Pump housing SS316L SS316L Valve plate SS316L SS316L Diaphragms Santoprene Santoprene Valves EPDM EPDM O-rings EPDM EPDM Non-product wetted materials (standard): Pump housing SS316L SS316L Bearing housing SS316L SS316L Base plate SS316 SS316 Hood SS316 SS316 Dimensions pump with motor and housing: Length mm (inch) 257 (10,2) 277 (10-91) Width mm (inch) 164 (6,5) 200 (7,87) Height mm (inch) 185 (7,2) 195 (7,67) Weight pump with motor and housing kg (lb) 9,8 (22) 11,2 (25) IP protection class pump IP 54 54 Operating temperature range °C (°F) 0…40 (32…104) 10…30 (50…86)

Condition: used, Year of construction: 2016, functionality: fully functional, Model L 132 RS-13 Fpedpfx Akjztqitjhjk Engine power: 132 kW Operating pressure: 13 bar

Year of construction: 1980, condition: reconditioned (used), machine/vehicle number: 2489, stock-No.:2489 1 used, functionally tested Single-Screw-Extruder, ready for trial-run: Manufacturer: KUHNE Germany Type: ES 60-24 Screw- Ø 60 mm – 24 LD Fsdpfsd Sg Hcox Akhspk Main-feed zone can be chilled( cooling unit not included ) Screw speed up to 100 r.p.m. Extruder Motor: 25,5 kW – 63 A – DC 4x Heating zones with air-cooling 3x additional heating zones for down-stream equipment as: die-head, tools, screen-pack-changer, etc. control board Relating down-stream-equipment as screen-pack-changer, pelletizing etc. against additional price, details upon request. More extruders ex stock available, visit us or ask for our most recent Machine-Stock-List. You´re welcome.

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x additional temperature controller for down-stream equipment Control board overhauled You´re welcome for inspection visit in our stock Wuppertal-Germany Fedpfxoiyya Ao Akhepk More extruders available

Year of construction: 2004, condition: reconditioned (used), Stock-No. 2054 1used, partly overhauled and functionally tested Single-screw extruder AlphaTec A-ES 75.28 Screw –Ø 75 mm- 28 LD main drive 75 kW- AC Screw speed up to 80 r.p.m. - adjustable 1x venting port with vacuum-pump cylinder barrel heating apporx. 30 kW installed 3x addituional temperature controller for down-stream equipment Control board overhauled Fpsdpfx Akoiyx Uzohek You´re welcome for inspection visit in our stock Wuppertal-Germany More extruders available

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LD Capacity 800 kg/h depening material specifications Drive from 197 kW up to 350 kW possible , optional by appoinment L/D 34 - 40 LD , by appointment > due to your material formula needs drive up to 230 kW - 350 kw optional against add.price 1x venting port new control board optional - equipment against additional price: screen-pack-changer Fodsc Rukwjpfx Akhjpk pelletizing material feeding , loss-in-weight gravimetrci blenders pellet-classifier and more Please inform which equipment you need for a detailled quotation, thank you. All ex stock available

Year of construction: 2000, condition: like new (used), stock-No.1919 Fpsdpfxob Aq Hps Akhsk complete set of extrusion-tools / calibrating parts , used but very good condition- very less operting hours, tools made in Germany ᐳ for the production of electric cable protection canals/ ducts, incl. punching unit to punch the fixing holes in the ready-made profiles

Year of construction: 2003, condition: refurbished (used), Stock-No. 2086 twin-screw compounding extruder BERSTORFF type ZE 60 A - UT screw size 2 x 64 mm - 32 LDscrew speed up to 625 r.p.m. adjustable Capacity +/- 800 kg/h depending material specifications Drive from 197 kW up to 350 kW possible, optional by appoinment FLENDER gear-box L/D 34 - 40 LD , by appointment , due to your material formula needs 1x venting port new control board optional - equipment against additional price: screen-pack-changer / melt-filtration unit pelletizing material feeding , loss-in-weight blenders pellet classifier screw configuration and more Fpjdoh Eyduspfx Akhjk Please inform about your needs to send you a detailled quotation, thank you All ex our stock Wuppertal-Germany available

Condition: used, Grundfos CR 60 20 A-F-A-BBUE Model B500002P39447 16 bar max. 110 degrees Celsius 60m3/hour Fjdpfxjuif Iuj Akhopk 20.2m height n 2900 rpm The offer is aimed exclusively at traders within the meaning of §14 BGB (German Civil Code) No sale to private individuals