Used Müga A 600 for sale (74,121)

Condition: refurbished (used), PRESSBRAKE ECLAIR Dedpshxyhkjfx Abfsuu TYPE AP 600 PRESSURE 600t SHEET METAL LENGTH 6000mm WEIGHT 60000kgr IN TOP CONDITION

Condition: used, Year of construction: 2023, operating hours: 1 h, MULAG Combination Mowing Device MKF 600 for Mounting on Unimog Mowing combination MKF600 consisting of: - Front boom mower MFK 500 - Verge mower MRF Base unit for single or dual-operator use, designed for front mounting plate size 5 with the following specification: Equipment Front Boom Mower MFK 500 * Designed for right-hand operation * Boom swivel range: 190 degrees * Hydraulically actuated collision protection with damping of the boom system via hydraulic accumulators * Hydraulic lateral shift of the boom by 1300 mm (in combination operation) / 1800 mm (in solo operation) * Float position of mowing units can be switched on/off * Quick-change device for mowing units * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve * Operating hours counter * Proportional mlcontrol permanent hydraulics included * (CAN bus technology) for the boom, including dual-cylinder actuation (multiple functions may be performed simultaneously) * Boom relief regulation type AER with stepless ground pressure adjustment via potentiometer, can be switched on/off * Operator information system with TFT color display, including system monitoring and diagnostic support * Multifunction lever mlbasic single-handed control unit with multifunction lever (ergonomically designed for right hand use, 4 functions on one plane. All functions are proportionally controllable) * Combination control panel * Control of both units via multifunction control lever * Oil cooling system with electric temperature monitoring included * Tool drive via front PTO * Hydraulic pump for 1st implement drive 62l / 340 bar * Hydraulic pump for 2nd implement drive 50l / 280 bar * Filled with Panolin HLP Synth, fully synthetic, rapidly biodegradable hydraulic oil * Telescopic boom system hydraulic adjustment for extending reach by 1,000 mm * Reach 6.50 m from vehicle center in combination operation Dodpfx Aox R Uw Sobfjuu * Reach 7.00 m from vehicle center in solo operation * 2-way electro-hydraulic switching valve controlled from operator panel (additional hydraulic dual functions) * Hydraulic rotation device for mowing implements, swivel range of 230°, operable from control panel. Boom side integrated, including quick-change plate * Hydraulic couplings: Quick coupling kit for flat-sealing quick couplers on mower * Cable set ES6 Front Unimog Connection of operator panel via universal electrical interface ES6 of Unimog * Hydraulic stabilizer legs included, 2 pieces, height adjustable * LED work lights, 2 pieces, mounted on boom * High-pressure water hose routing on boom Verge Mower MRF 350 consisting of the following configuration: Verge Mower MRF 350 * For right-hand operation * Reach 3.50 m from vehicle center * Hydraulic lateral adjustment of verge mower by 1000 mm (in combination operation) * SAFETY STOP - Electric knife shaft on/off control from the operator panel, including brake valve (knife shaft overrun limited to approx. 4 seconds) * Operating hours counter * Sensing automatic: control of the mowing head around obstacles. Mowing speed adjustment for evasive movement is steplessly adjustable by the operator at the control panel. * Single-hand operation unit with holder in Unimog Verge Mowing Head RMK 1200 * Working width: 1200 mm, Cutting thickness: max. 10 mm * MS-R blade * Knife shaft speed: approx. 3000 rpm * Standard sensing arm Mowing Head MK 1200 plus * Working width: 1200 mm, Cutting thickness:

Condition: used, Year of construction: 2010, functionality: fully functional, overall weight: 1,300 kg, fuel type: electric, – Made in Germany – Year of manufacture: 2010 – Shredder equipped with a magnet for collecting metal parts TECHNICAL SPECIFICATIONS: – Feed opening dimensions: 600 x 800 mm – Feed opening volume: 0.6 m³ – Main engine: 18.5 kW – Rotor diameter: 252 mm – Rotor speed: 90 rpm – Number of knives: 15 pcs – Knife dimensions: 40 x 40 mm – Screen size: 16 and 20 mm – Auto-reverse function – Hydraulic drawer: 160 mm – Chute for discharging wood chips, length: 2600 mm Dedpfsy S Tg Isx Abfeuu – Chute outlet height: 1450 mm – Chute diameter: 150 mm – Chute motor power: 0.75 kW – Weight: ~1300 kg

Condition: excellent (used), Technical condition: very good Visual appearance: very good Dodpfx Ajt Dltbsbfsuu Please contact Ferdinand Pater for more information

Condition: excellent (used), Technical condition: very good Visual appearance: very good Please contact Ferdinand Pater for more information Dsdpfet Hty Uex Abfjuu

Condition: good (used), Technical condition: good Dedpfx Ajt Dlurjbfouu Visual appearance: good Please contact Ferdinand Pater for more information

Condition: excellent (used), Technical condition: very good Djdpfet Dlq Tex Abfeuu Visual appearance: very good Please contact Ferdinand Pater for more information

Condition: excellent (used), Year of construction: 2007, BA 600-2 CNC, Horizontal Milling and Drilling Center SW Schwäbische Werkzeugmaschinen GmbH Travel: X axis: 600 mm Y axis (changeover position): 600 (975) mm Dodpfoy Swq Rex Abfeuu Z axis: 500 mm Control: Siemens 840D control, side-mounted Feed/Rapid traverse speeds: X, Y, Z: 1 – 45,000 mm/min Max. feed force X, Y, Z: 15,000 N Average acceleration: X, Y, Z: 2.5 m/s² Measuring system: Direct measuring system X, Y, Z Spindles: Spindle speed (infinitely variable): 20–10,000 rpm Torque: 2 x 363 Nm (S6/40% duty cycle) Power: 2 x 38 kW (S6/40% duty cycle) HSK-A 100, horizontal tandem arrangement Spindle distance: 600 mm Spindle bearing diameter: 100 mm Motor spindles, liquid-cooled, AC technology Working area: Swing carrier with spur gearing, max. workpiece weight 2,000 kg Swivel time 0/180 degrees approx. 6.0 sec 2 NC rotary tables, hydraulically clamped, max. workpiece weight 700 kg, table speed 25 rpm Partition between machining and loading area Tool magazine: 2 x 50 tools HSK-A 100 chain-type magazine Tool change time (chip-to-chip): 4.48 sec Max. tool diameter: 100 mm 250 mm with adjacent slot free Max. tool length: 420 mm Max. tool weight: 20 kg Equipment: Central lubrication Oil minimum quantity lubrication (spindle lubrication) Chip conveyor (hinged belt conveyor) Coolant purification with compact band filter Hydraulic unit Maintenance unit Water recooler Full enclosure, crane loading possible Dimensions: approx. 5.15 x 8.50 x 4.20 m Weight: approx. 20,000 kg Year of manufacture: 2007 Other features: Very good condition Setup parallel to main time Available from December 2023/January 2024

Condition: used, Year of construction: 2009, x-travel: 4000y-travel: 2000z-travel: 600messurements (LxWxH): 6.400 x 3.200 x 3.100weight approx.: 10.500 Control: Siemens PLC Touch Screen directly usable DXF files Outlet pressure: max. 5500 bar Dusdpfjwiatiox Abfou Abrasive conveyor system for water jet cutting systems - filling weight 350 kg OMAX vacuum sensor for monitoring the abrasive supply to the nozzle Pump pressure control sensor With water jet cutting, water is compressed at a pressure of up to 5500 bar. Depending on the requirements and the workpiece, this is then pressed through a nozzle with a diameter of 0.01 to 0.08 mm. Since water jet technology processes materials without heat input, there are no deformations. By adding an abrasive, water jet cutting enables maximum precision with tolerances of +/- 0.01 mm. Our flexible production allows vertical as well as diagonal cuts. We would be happy to receive your individual CAD data. The water jet technology offers great advantages for industry, trade and individual prototype production. Water cutting technology is also a plus point for the environment, as it works dust- and steam-free and also saves material. Waterjet Cutting: Example Gallery What sounds impressive in theory is even more impressive on the finished object. We have put together a selection of images to demonstrate our waterjet cutting capabilities. Click through the photos in the example gallery and get an impression of what is possible with this modern processing method. Waterjet will also find the right solution for your order! benefits No deformations in the cutting area Cutting without heat input Material saving High precision: +/- 0.1mm Cutting area: x = 3010 mm; y = 2010mm; Z=250mm Flexible manufacturing Vertical and oblique cuts Adoption of your CAD data formats: DXF, DWG, iges, stp, step, prt, jpt, jam Environmentally friendly, vapor and dust free We cut everything All materials brought into shape aluminum steel Brass Copper & Bronze Other precious metals Glass Granite & Marble tiles composites Promat cuts rubber plastics plexiglass Options: Oil cooler                                                         ¤ 10,725.00 Water filter system                                           ¤   1,430.00 Sludge suction system                                     ¤ 10,725.00 Professional water treatment system               ¤ 10,725.00 An oil cooler must be present when commissioning!!! So you can work longer than 1 hour. Extras: Including extra spare parts worth approx. 25.000¤ (see pictures)

Condition: excellent (used), Year of construction: 1996, functionality: fully functional, 1 used rapid steam generator ----- Dodpfjw I T Ivex Abfjuu Manufacturer: LOOS, Gunzenhausen Type: DF 600 Capacity: 600 kg/h Thermal output: 400 kW Max. operating overpressure: 13 bar Water content approx.: 43 l Year of manufacture: 1996 Year of heating coil manufacture: 10 / 2023 Equipped with Weishaupt gas burner, gas control section, control cabinet mounted on the boiler body, feed water pump, and the existing coarse and fine fittings.

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, 1 used instantaneous steam generator ----- Manufacturer: CERTUSS Type: Junior Performance: 600 kg/h Maximum heat output: 436 kW Operating overpressure: 16 bar Duedpowra S Refx Abfeu Water content: 42.5 l Test pressure: 57 bar CE mark: CE 0035 Year of manufacture: 2006 Equipped with Certuss gas burner, gas control section, Control cabinet, mounted on the boiler body, feed water pump and the existing coarse and fine fittings.

Condition: used, Year of construction: 2021, operating hours: 991 h, lifting height: 4,600 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Still RX60-30L/600 electric forklift, year of manufacture: 2021, hours: only 991h! Previous owner: German Armed Forces. Rated load capacity: 3,000 kg. Lift height: 4,600 mm. Fork length: 1,800 mm. Equipped with weighing system, side shifter, triplex mast, full free lift, and road-legal (StVZO) lighting. Including charger. In good condition and immediately operational. On request, we are happy to provide a leasing or financing quote. Mr. Ebert (tel. ...) will assist you personally. For more information, please visit our website. All information subject to change and prior sale. Power steering, overhead guard. = Further information = Lifting capacity: 3,000 kg Dusdpfxey Sd N Te Abfou Overall height: 220 cm Contact Tobias Ebert for further details.

Condition: used, Year of construction: 2021, operating hours: 1,386 h, lifting height: 4,600 mm, fuel type: electric, motor manufacturer: Elektro, gearing type: automatic, Still RX60-30L/600 electric forklift, year of manufacture: 2021, operating hours: only 1,386h! Previous owner: German Armed Forces. Rated load capacity: 3,000 kg, lift height: 4,600 mm, fork length: 1,800 mm, onboard weighing system, side-shift, triplex mast, full free lift, roadworthy lighting according to German road traffic regulations (StVZO), including charger. Good condition, immediately ready for use! On request, we can provide you with a tailored leasing or financing offer. Mr. Mihm (tel.) will be happy to assist you. Further information available on our website. Subject to errors and prior sale! Features: Power steering, protective roof. = Additional Information = Lift capacity: 3,000 kg Dedpsy Sd N Hsfx Abfjuu Overall height: 225 cm For further details, please contact Tobias Ebert.

Condition: like new (used), 4.000 m² warehouse platform Nedcon Column grid 800 cm x 600 cm! Djdpfshzxagex Abfsuu Used, top condition, as new, see pictures Height stage top edge 370 cm superimposed load 500 kg/m² Floor covering various designs available. Freight lifts, stairs, railings and accessories sufficiently available CAD planning and assembly possible Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: like new (used), 1.500 m² warehouse platform Nedcon Column grid 800 cm x 600 cm! Used, top condition, as new, see pictures Height stage top edge 370 cm superimposed load 500 kg/m² Floor covering various designs available. Freight lifts, stairs, railings and accessories sufficiently available Duedpehzxbpjfx Abfou CAD planning and assembly possible Partial sale possible Negotiation price: on request! Goods are in stock. Transport and assembly possible on request. Viewing possible at any time by appointment. More info on request. Constantly over 5000 running meters of pallet racks from numerous manufacturers in stock. (Changes and errors in the technical data, specifications and prices and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous articles from various areas broom-clean business clearances company liquidations Fast- flexible - ready to hit! We also clear and dispose for liquidators. Write us with some keywords, we will contact you immediately. To get to our site, please click on our logo!

Condition: good (used), Year of construction: 2008, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 810 mm, spindle speed (max.): 6,000 rpm, number of spindles: 1, number of slots in tool magazine: 150, Used Okuma MA-600HB Horizontal Machining Center Year: 2008 Spindle cooling Max. 6000 rpm Z- 810 mm X- 1000 mm Y- 900 mm Tool magazine for 150 tools 1 spindle 4 axes Djdoyrf I Aepfx Abfjuu 10-pallet system We have 2 units available. Price is per unit, ex location.

Condition: new, Year of construction: 2025, COST CUTTING OPTIMIZER Superangle 600 is the ideal cutting center for angular and optimized cuts. A direct technological evolution of traditional cutting methods, Superangle 600 is able to increase productivity, guarantee maximum precision and maintain a simple and flexible process logic. EXTREMELY ROBUST Structure completely in thick and reinforced painted steel. Pusher support carriage mm. 300x345x25. Toothed belt width 50 mm. with 33 internal steel inserts. Dsdewk E Uuopfx Abfjuu TECHNOLOGICALLY INNOVATIVE Electronic system consisting of a computer connected in real time to a latest-generation numerical control. Software in Windows environment. Complete with management of 5 qualities. 22” LED color video. Tele-service via internet. + Macro Excel. FAST Total optic system. Brushless electronic movement motor servo driver. Brushless electronic movement motor servo driver for angular cutting movement. Adjustable cutting speed. Two aligners. RELIABLE AND SAFE Transmission system with sliding on double tempered and ground guides. “Skf” ball bearing slides with double dust protection and automatic lubrication. Self-supporting electrical panel separated from the machine. Independent pneumatic adjustments to adapt to different types of processing. Maximum safety protection lock on the rear side.

Condition: new, Year of construction: 2026, functionality: fully functional, VALMEC MASTER 600 Brushing Machine BRAND NEW Year: 2026 Technical specifications: Machine equipped with two horizontal units. Manual adjustment of groups with digital display. 2 brush motors, each 4 kW (belt drive). Variable belt speed from 4 to 12 m/min with frequency inverter. Belt motor power: 0.55 kW. Dusdpfoy R Tlbex Abfeu Brush units mounted on precision guides. One side of the brush unit is open for processing large parts. Useful working width: 600 mm. Maximum working height: 300 mm. Maximum brush diameter: 210 mm. Complies with CE standards. The machine is supplied with: One steel brush, 600 mm long and 210 mm in diameter. One Tynex grit 80 brush, 600 mm long and 210 mm in diameter.

Condition: good (used), Year of construction: 1998, functionality: unexamined, travel distance X-axis: 600 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 520 mm, table width: 420 mm, table length: 840 mm, spindle speed (max.): 6,000 rpm, Table size 840 x 420 mm Travel X/Y/Z: 600 / 410 / 520 mm Spindle SK 40, speed up to 6000 rpm Main drive 8.5 kW Tool changer with 22 stations Control: Heidenhain TNC 370 Djdpfx Ajy R Um Tjbfjuu Including coolant system

Condition: new, mileage: 134 km, power: 375 kW (509.86 HP), first registration: 03/2026, fuel type: electric, axle configuration: 4x2, wheelbase: 4,000 mm, fuel: electricity, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, total length: 6,250 mm, total width: 2,500 mm, total height: 3,900 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 11,500 kg, Year of construction: 2026, Equipment: Bluetooth, EBS, air conditioning, airbag, central locking, cruise control, electric window regulation, hill-start assist, onboard computer, power assisted steering, traction control, trailer coupling, = Additional Options and Equipment = - Adaptive cruise control - Alarm system - Apple CarPlay - Front work lights - DAB radio - Parking assistance - Windscreen - Enclosed cab - Heater - Keyless Go - Air conditioning - Rain sensor = Further Information = General Information Number of doors: 2 Applications: Agriculture, cleaning, construction, demolition, land drainage, drainage, forestry, haulage, fruit growing, land management, horticulture, internal logistics, livestock farming, mining, parking management, recycling, road construction and arable farming Registration: BD-122-F Technical Information Number of cylinders: 6 Engine displacement: 12,777 cc Maximum front axle load: 9,000 kg Maximum rear axle load: 11,500 kg Weights Unladen weight: 11,532 kg Payload: 8,968 kg Gross vehicle weight: 20,500 kg Dodpfx Ajyx Dglobfsuu Interior Number of seats: 2 Maintenance Inspection (APK): valid until 03/2027 Condition General condition: very good Technical condition: very good Visual condition: very good Financial Information Price: On request Warranty Factory warranty valid until: 03/05/2033

Condition: reconditioned (used), Year of construction: 1992, Precision cutting machine Make: DEGEN Model: TAM 25/600 Year of manufacture: 1992 - partially overhauled, newly painted, RAL7035 light grey / RAL7012 basalt grey / Mach. No.: 1017 with guarantee geometric acceptance with test report Accessories: - coolant system - operating instructions Dsdpfehfwfaex Abfjuu - used, as seen -

Condition: reconditioned (used), Shrinking tunnel / foil wrapper Dujdpfx Asg D Nyhobfou Make: Kallfass Type: semi/automatic shrinking tunnel Model: Combimatic 600 Frame: steel painted Range: max. packet W x L x H = 600 x 380 x 400 mm Capacity: max. 600 packs/min Dimensions: L x W x H = 4 200 x 1 550 x 2 000 mm Weight: 850 kg Power-supply: 380 Volt - 50Hz - 23,5 kW Features: mobile water-cooled welding beam automatic / semi-automatic 2 hand control Remark: excellent condition

Condition: like new (used), Net weight: 410 kg Wheel diameter: 600 mm Motor power: 2.2 kW Extraction nozzle diameter: 100 mm Table tilt range: 0–20° 715 RPM Dsdpfsy Skx Usx Abfjuu Emergency mushroom stop CE marking Year of manufacture: 2001

Condition: good (used), Year of construction: 1994, machine/vehicle number: 4422550994025, Offer 26088 Hydraulic Profile and Bar Shear with Notching Device and Punching Unit Technical Data: - Flat Bar Shear - Flat steel: 400 x 16 mm - or: 300 x 18 mm - Section Steel Shear - L- and T-iron at 90°: 130 x 12 mm Dedpfxey Nk Rls Abfeuu - Square bar / round bar: 40 / 40 mm - Notching Unit - With square notcher for sheet metal up to approx. 13 mm - Notch depth approx.: 70 mm - Notch width approx.: 52 mm - Punching Unit - Punching force approx.: 60 t - Throat depth: 400 mm - Stroke approx.: 10 to 50 mm - Punches steel up to Ø 31 in 15 mm - Electrical contact stop - Various punch dies and matrices - Drive: 400 V / 5.5 kW - Space requirement: W 1100 x H 2000 x D 1700 mm - Weight approx.: 2100 kg

Condition: used, This listing is for 1 of 3 Hamilton Microlab 600 series dual syringe dispenser The units are in full working condition and ready for immediate use General Description The Hamilton Microlab 600 Series Dual Syringe Dispenser is a semi-automated liquid handling system designed for laboratories requiring high-precision, high-accuracy fluid transfers. Built on Hamilton’s world-renowned syringe technology, it leverages positive-displacement mechanics to ensure consistent performance across a broad range of fluid viscosities and characteristics. Semi-Automated Liquid Handling With a simple touch of the hand probe button or an optional foot switch, users can actuate the dual precision syringe drives to aspirate or dispense exact fluid volumes. This ergonomic control reduces hand fatigue and enhances repeatability in routine workflows. Precision by Design Microlab 600 diluters and dispensers achieve precise and reproducible results through positive-displacement syringe drives that are independent of fluid viscosity, vapor pressure, or temperature. This makes the instrument highly suitable for complex or sensitive fluid-handling tasks such as: Serial dilutions Duedpsxhfztjfx Abfsu Titrations Standard preparations Reagent distribution Sample aliquoting