Used Mario Frigerio Multi Wire Drawing Line for sale (17,760)

Condition: used, Year of construction: 2002, Charmilles Robofil 440-CC Wire-Cut Electro-Discharge Machine. Serial No. 931081 (2002). Country of Origin: Switzerland Please Note: this lot has been professionally decommissioned and secured for transit Isdpfjy R Adyox Ab Neat Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2002, Charmilles Robofil 4030 SI-TW Wire-Cut Electro-Discharge Machine. Serial No. 174621 (2002).Country of Origin: Switzerland Please Note: this lot has been professionally decommissioned and secured for transit Iedpfx Abjy Rz Nzo Noat Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: used, Year of construction: 2010, Agie Charmilles FI 640 CC Wire-Cut Electro-Discharge Machine. Serial No. 113 (2010) Please Note: this lot has been professionally decommissioned and secured for transit Iajdpfxey Rz Iws Ab Nst Location: This lot is located in Birmingham, UK. A charge of £550 for decommissioning and loading onto suitable transport will be automatically added to your invoice should you be successful in purchasing this item. Blocking and securing will be at the cost of the purchaser.

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Iaodpfoy R Tk Rox Ab Nst Flat bars 300x20

Condition: like new (used), functionality: fully functional, gearing type: hydrostat, fuel type: electric, Year of construction: 2024, operating hours: 500 h, Complete uPVC Window & Door Fabrication Line – Ready To Operate Modern and clean fabrication setup suitable for manufacturing uPVC windows and doors. The line is in very good condition, fully functional and ready for immediate use. Manufactured by Özgenç Makina. Ideal for start-up business or expansion of an existing fabrication company. Setup includes: * Cutting and welding machinery * Corner cleaning equipment * Work tables and storage racks Iasdpey Sbu Tefx Ab Njt * Air compressor and accessories * Clean workshop environment * 3 phase ready setup Well maintained and lightly used. Can be sold as machinery only or together with the workshop setup by separate negotiation. Viewing welcome by appointment. Transport can be arranged at buyer’s cost. Serious enquiries only. Price is £34.590

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2-1, wire diameter (max.): 16 mm, 2006, Eurobend CNC 16x4 rebar straightening and cutting machine, designed for processing rebar from coils. It is in used but working condition. It features 4 x 5-ton decoilers with pneumatic brakes. It has 4 straightening rotors for rebar wire with diameters of 8-10-12-(14) or 16 mm, and automatic cutting with hydraulically operated moving cutters. It can operate with 1 line or even up to 4 lines simultaneously. PC with barcode scanner option. Cutting length up to 14 meters and more. 4 storage pockets for cut bars. Chain conveyor for sideways and upward transport of cut bundles. Iodpfx Absrdvq Aj Nsat

Condition: used, Year of construction: 2020, functionality: fully functional, Complete Used Peeling Line Complete used peeling line for sale, two available. This line was installed in 2020 and decommissioned at the start of 2025. Each line was previously doing up to 14 tonnes of product a week, can be used for potatoes, carrots, swede, parsnips etc. Each line consists of: Bin tipper dimensions (with frame) approx 2.670 m wide x 1.91m tall x 2.240 m long Large boat hopper. Conveyor belt width 500mm x belt length 1900mm long Elevator with hopper into peeler 3700mm high x 400mm wide Vegetable/potato batch peeler Waste water unit Surge tank with water sprayer Roller inspection table 900mm wide x 2.9m long Incline slatted conveyor Belt 400mm wide x 2800m long Surge tank 600mm wide x 2.3m long Ijdpfx Abewak Aio Njat Dip Wheel Drywhite container Weigher & bagger with metal detector Also includes waste conveyors and all associated control panels. This can be sold as two complete line, one complete line or as individual machines depending on your requirements.

Year of construction: 2022, condition: used, 10 Bin Food Grade Multi Head Filling Machine complete with Loading Hopper with 300kg Capacity, Hopper feeds Bucket Elevate on Machine demand and applies product into Multihead Bins to service Doypack Machines. Can be set up on dual floors (as pictured) or utilise Tower Framework. All Multihead Bins are serviceable and can be cleaned down, PLC Controls allow programming both in Multihead Element but also on the Doypack Machines. (2022). Country of Origin: United Kingdom Iaedpfx Ajy Rzfvsb Not Location: These lots are located in Burnham-on-Crouch, Essex, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the Purchaser. All/Any tooling is being offered as specifically described. Offers considered prior to auction

Condition: used, Tapping machine, pipe thread cutter Iodpfefyh Ebjx Ab Njat -without tools -Operating voltage: 220 volts -Dimensions: 830/530/H1080 mm -Weight: 64 kg

Operating hours: 200 h, condition: ready for operation (used), functionality: fully functional, Complete Equipment Sale for Cheese/Dairy Production 1 - 500 l/h ATA brand pasteurizer, three-phase 1 - Horizontal cheese press, capacity for 48 kg, 4-position 1 - 150 l ricotta vat, three-phase 2 - 300 l refrigeration cabinets with three levels of separation 1 - 220 l coagulation vat, three-phase Iaedpfx Aey Rv Edeb Net 1 - 150 l coagulation vat 2 - Hand wash sinks 2 - Work tables 1 x 1.70 m 1 - Vacuum machine 40 - Stainless steel cheese curing racks 0.64 x 0.52 m 2 - Rack trolleys for racks 1 - Stainless steel table with shelves 0.6 x 1.45 m 1 - Table with sink and sliding doors 0.6 x 1.45 m 3 - 30 liter aluminum cans 2 - 50 liter aluminum cans 1 - Boot washer 1 - 600 liter refrigerated milk tank

Condition: good (used), For sale: Baking trays with gutters brand: SASA number of pieces in total: 550 baking trays total price: €25,000 dimensions: Length: 200 cm width: 80 cm Iaodpfort Uw Rjx Ab Not height: 5 cm gutter width: 9.5 cm number of gutters per plate: 21 gutters The baking trays come from a current Mecatherm Line See also the photos All as good as new and still provided with a Teflon layer and all the plate are stainless steel. Viewing is possible on location If you have any questions, we'd love to hear from you! Kind regards, Leo Holland for sale: baking trays with gutters brand: SASA total number of pieces: 550 baking trays total price: 25,000,- dimensions: Length: 200 cm width: 80 cm height: 5 cm width gutter: 9.5 cm number of gutters per plate: 21 gutters See also the photos All as good as new and still provided with Teflon layer and all plates are made of stainless steel The baking trays come from a current Mecatherm Line Viewing is possible on location If you have any questions, we would like to hear from you! kind regards, Leo Holland

Condition: good (used), mileage: 762,146 km, power: 345 kW (469.07 HP), first registration: 02/2021, fuel type: diesel, tire size: 385/55R22,5, axle configuration: 6x2, wheelbase: 4,900 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 9,840 mm, total width: 2,550 mm, total height: 3,700 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, seat heater, traction control, trailer coupling, = Additional Options and Accessories = - Second diesel tank - Heated mirrors - Digital tachograph - Tachograph (control device) - Fixed Iasdpfx Aboyy Umxo Nst - Globetrotter XL - Halogen lamp - Manual - Radio/cassette - Lane departure warning system - Fabric upholstery - Blind spot sensor = Remarks = Configuration: 6x2, Unladen weight: 10,360 kg, Gross weight: 27,000 kg, Total tank capacity: 950 liters, Second diesel tank, Trailer coupling, Kingpin diameter: 40 DIN, Chassis material: steel, Fifth wheel: fixed, Number of locks: 1, Cab type: Globetrotter XL, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: blue, Heated mirrors, Lighting type: halogen lamp, Lane departure warning system, Air conditioning, Heated seats, Bluetooth, Blind spot sensor, Engine power: 345 kW (463 hp), Fuel: diesel, Euro: 6, Transmission type: I-Shift, Gearbox: Volvo, Gears: 12, Power steering, ABS, ASR, Starter battery, Rotation direction: 1x20, System length: 80 cm, Central locking, Seating arrangement: 1+1, Seat upholstery: fabric, Seat adjustment: manual, LAST AXLE STEERING // ASSE STERZANT // WB490 // MULTI BDF CHANGER = More Information = Transmission Transmission: VOL, 12 speeds, automatic Axle configuration Brakes: disc brakes Suspension: air suspension Axle 1: Tire size: 385/55R22.5; steered; left tire tread: 6 mm; right tire tread: 6 mm Axle 2: Tire size: 315/60R22.5; twin tires; inner left tread: 8 mm; outer left tread: 7 mm; inner right tread: 7 mm; outer right tread: 7 mm Axle 3: Tire size: 385/55R22.5; steered; left tread: 10 mm; right tread: 6 mm Weights Empty weight: 10,360 kg Payload: 16,640 kg GVW: 27,000 kg Functional Loading platform height: 104 cm Maintenance APK (technical inspection): valid until 02/2027 Condition Technical condition: good Visual condition: good Damages: none Number of keys: 3 Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European brands of various years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, quickly changing inventory • Recognizable quality • Good prices • Reliable business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And more… Please visit our website for special offers and our complete stock list: Leasing through Kleyn Trucks is possible in most European countries! Calculate your leasing rate quickly and submit an inquiry via our website. Ask directly about our European warranty package.

Condition: like new (used), Year of construction: 2020, Ficep Raz 601 (also known as Nozomi) Automatic 9-axis CNC thermal coping robot Section size [min. mm]: 80x10 Section size [max. mm]: 610x450 Iaodpfx Absxq Rpns Net Plasma torch [qty]: 1 Infeed length: 16 m Outfeed length: 16 m

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, DG Line 6500 Automatic Perforating/Creasing Machine with Low Pile Feeder. The PIT STOP DG Line 6500 is perfect for companies offering print-on-demand services and requiring high-quality results from digitally printed materials, with fast and straightforward operation. The format is suitable for digital printing and also for book covers (books on demand) with an extension to 50×85 cm, or standard operation at 50×70 cm without the extension. Additionally, the PIT STOP DG Line 6500 can be equipped with a standard perforating kit (optional extra), which is programmable directly via the user display. Sheet Size Min / Max: 8×10 cm / 50×70 cm (extendable to 50×85 cm with optional feeder extension) Sheet Weight: 80 to 400 g.s.m. Programs: 20 programs with up to 20 operations each Minimum Creasing Distance: 0.1 mm Iodoy Spaqjpfx Ab Neat A4 Production (1 crease): up to 6,500 sheets per hour Power Supply: 230 V, 50 Hz, single-phase Power Requirement: 2 kW Net Weight: 180 kg Dimensions: 150 x 75 x 120 cm

Condition: used, Strip Processing Line - Decoiler and Straightening Machine Year of manufacture: 1991 Strip width: 50 to 450 mm Sheet thickness with straightener inactive: 6 mm Sheet thickness with straightener active: 2 mm - Excellent equipment and feed-in aids Required floor space for the complete line (L x W): approx. 7000 x 3000 mm Total weight of the system: approx. 11 tons Good condition Straightening Machine HMS Type RS 47-04/1, Machine No. Strip width, nominal: 400 mm Strip width, max. pass-through: max. 455 mm Strip thickness at 400 mm width: max. 1.5 mm (steel) Strip thickness at 400 mm width: max. 2 mm (copper) Speed: max. 40 m/min Number of straightening rollers: 7 pcs Straightening roller diameter: Ø 40 mm Number of pinch rollers: 2 pcs Pinch roller diameter: Ø 80 mm Entry height, pass height: 1500 mm - Straightening rollers hardened, ground, and hard-chromed, with central support - Pinch rollers hardened, ground, and hard-chromed, with hydraulic disengagement - Manual straightening roller gap adjust - Feed-in aid with hydraulically extendable tongue and hydraulically adjustable deflection roller - Adjustable side strip guide - All straightening rollers driven via distribution gearbox with cardan shafts - Both pinch rollers driven via gearbox with cardan shafts - Frequency-controlled drive via geared motors - Straightening machine opening stroke 250 mm for cleaning or processing thicker material, stroke movement via trapezoidal thread spindle - Ultrasonic loop control Transport dimensions (L x W x H): 3600 x 2200 x 2200 mm Nett weight: approx. 4 tons Decoiler HMS Type BA 1.5-06/80, Machine No. Coil weight: max. 8000 kg Iedpfxoif Sg Sj Ab Neat Coil outside diameter: max. 1600 mm (with coil car) Coil outside diameter: max. 2000 mm (without coil car) Coil turntable diameter: Ø 1700 mm Coil inside diameter, expanding range: 460-520 mm Coil width, nominal: max. 630 mm Spreader jaw width: 750 mm Height of the decoiler drum above base plate: 1500 mm - Decoiler drum driven by hydraulic motor and gear - Pneumatic run-on brake on decoiler drum, TWINFLEX - Hydraulic expansion of the decoiler drum, centrally via wedge slider system - Hydraulic hold-down arm with hydraulically driven double pendulum roller - Coil car with 12 tons lifting force and 300 mm stroke - Decoiler frame above floor with motorized cross travel drive Transport dimensions (L x W x H): 3500 x 1900 x 2500 mm Nett weight: approx. 5 tons Central hydraulic unit, adjacent Tank capacity: 350 liters Motor power: 18.5 kW - Drive motor with 2 REXROTH pumps (tandem pump) - Oil cooler as air heat exchanger with fan motor Transport dimensions (L x W x H): 1600 x 850 x 1450 mm Nett weight: approx. 800 kg Electrical cabinet, adjacent - All cable connections via Harting connectors Transport dimensions (L x W x H): 2800 x 500 x 2250 mm Nett weight: approx. 800 kg

Condition: used, Single-column hydraulic press with draw cushion RÖCHER Type REP 100.01 SZ Hydraulic deep-drawing press Machine No. 15.499 Year of manufacture 2003 Pressing force: 100 tons Ram stroke: 500 mm Throat depth: 370 mm Installation height: 600 mm Table surface: 850 x 700 mm with a drop-through hole Ø 150 mm Ram surface: 700 x 600 mm Ram ejector force: 16 tons (160 kN) Ram ejector stroke: 100 mm Ram ejector with internal thread M24 x 1.5 mm Iodpfx Asyupuleb Neat Draw cushion force: 40 tons (400 kN) Draw cushion stroke: 200 mm Draw cushion area: 530 x 530 mm Pressure holding time: 0 to 90 sec. Table height above floor: 910 mm Hydraulic operating pressure: max. 300 bar Hydraulic tank capacity: 700 liters Approach speed (rapid traverse): approx. 400 mm/sec. Pressing speed up to 23.8 tons (238 kN): 5 to 68 mm/sec. Pressing speed up to 100 tons (1000 kN): 5 to 16 mm/sec. Return speed: 50 to 400 mm/sec. Main pump drive power: 18.5 kW Auxiliary pump drive power: 4 kW Power supply: 400 Volt, 50 Hz (63 Amps) - Operation and programming via PC 670 touch panel, keyboard and mouse - Machine control via SIEMENS S7-300 PLC system - Ram stroke and press force programmable via control system - Draw cushion with drawing and ejector function - Draw cushion force infinitely adjustable - Ram and draw cushion equipped with direct linear measurement system - Draw cushion can be moved in and out under the press area, for punching work using the drop-through hole - Floor-level installation, draw cushion does not penetrate the floor - Pressure and stroke cutoff - Fixed stop with indirect measurement system - Pressure holding time infinitely programmable - Table with holes for the draw cushion ram rods - Ram with ejector - Knock-out damping - Stroke triggering via two-hand operation, foot switch, hand lever and push button on the control panel - LEUZE light barrier as reach-in protection for safety operation - Front mirror columns on the press table can be shifted laterally - Electrical control cabinet mounted on machine frame - Hydraulic oil cooler with fan motor (oil-air cooling) - Manual central lubrication pump - 2x hose connections for tool tempering or cooling at the ram - Piece counter in the control system - 306 read operating hours - Operating manual, hydraulic diagram, and electrical diagram available Space requirements (L x W x H): 3100 x 1800 x 4160 mm Weight: approx. 13 tons Very good condition, as new

Condition: used, Year of construction: 2008, functionality: limited functionality, machine/vehicle number: VD 07.08.469, type of input current: DC, We are selling our Kallfass shrink tunnel. The display is defective, but the rest of the machine is fully functional. Iaodpfxsy Snw Is Ab Net Feel free to call if you have any questions.

Condition: ready for operation (used), Year of construction: 2018, Max. sheet format: 2100x1050mm, feed depth: 300-1050mm, feed width: 400-2100mm, connected load: 2.5kW, length: 4500mm, width: 2500mm, weight: 2.5t, 3-point and longitudinal seam gluing can be carried out. An inspection on site is possible. Ijdpfx Absy Sv Sye Noat

Condition: reconditioned (used), Year of construction: 2007, operating hours: 13,209 h, functionality: fully functional, pressing force: 50 t, filling opening width: 1,250 mm, filling opening length: 1,050 mm, bale width: 100 mm, bale height: 700 mm, bale weight: 500 kg, overall weight: 8,500 kg, oil tank capacity: 400 l, power: 15 kW (20.39 HP), year of last overhaul: 2026, volume flow: 108 m³/h, Technical data baler: Manufacturer according to type plate BRAMIDAN (original manufacturer Presto GmbH & Co. KG) Type HC 50 (corresponds to the Presto HPK 50) Iasdsy R Npcepfx Ab Njt Year of manufacture 2007 Operating hours 13,209 hours, as of March 2026 Number of bales pressed: 23,379 bales Pressing force 50 tonnes Specific pressing force 650 kN/m² Feed chute dimensions 1250 x 1050 mm (L x W) Filling volume 0.96 cm³ Theoretical cycle time 32 seconds Theoretical throughput capacity 108 m³/hour Bale dimensions 1100 x 700 mm (w x h) length variable Drive power 15 kW Power consumption, total in 50 A Tying 4-fold vertical, fully automatic Throughput rates with a bulk density of 30 kg/cbm approx. 3.1 t/hour Bulk weight of 60 kg/cbm approx. 4.5 tonnes/hour Bulk weight of 100 kg/cbm approx. 7.2 tonnes/hour Bale weights with a bale length of approx. 1.2 m up to 500 kg, depending on material Hydraulic oil tank capacity 400 litres PLC control Siemens S7-200 Effective transport dimensions excluding baler 6850 x 1950 x 2650 mm (l x w x h) Transport weight of press 8.5 tonnes Condition of the baler: The press was used in a production facility exclusively for pressing cardboard and was regularly serviced. With only 13,209 operating hours, the machine has seen little use. The press was partially overhauled in our workshop and then tested. The following overhaul work was carried out: Machine cleaned Bale retainer made operational and lubricated Light barrier replaced Twisting unit completely dismantled, broken down into individual parts, all bearings replaced, all plastic glides replaced, lubricated, chain tension adjusted Knife and counter knife dismantled, sharpened, reassembled Knife gap readjusted General maintenance work carried out and lubricated Scope of delivery: 1 baler with wire coil boxes, without wire (6850 x 1950 x 2650 mm) 1 bale chute (5100 x 1150 x 450 mm) 1 floor-mounted wire coil box (1450 x 380 x 360 mm) To transport the baler, you will need a tautliner with an effective internal height of 2700 mm. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Year of construction: 2011, Overview  This filling line for non-carbonated beverages in PET bottles was manufactured in 2011 and comprises a filtration system, a filling and capping machine, a labeling machine and a pallet wrapping machine. It is designed for bottle sizes from 1.5L to 5L. The line is being sold as the factory has been closed. All machines are professionally stored and can be inspected on site. Technical details  Filtration system | GYM Internacional | 8000 | 2011 Manufacturer: GYM Internacional Model: 8000 Year of manufacture: 2011 Capacity: 8,000 L/h Power consumption: 4 kW Dimensions: 2,500 x 1,500 x 100 mm Weight: 1,110 kg Bacteriological filtration through housing system Automatic filling monoblock | GYM Internacional | Grupo 9-1. PK | 2011 Bottle formats: 1.5L & 5L PET Output: 1,600 bottles/hour (1.5L) 700 bottles/hour (5L) Filling heads: 9 Capping heads: 1 (screw cap) Bottle diameter: Min. 120 mm, max. 300 mm Bottle height: 250-400 mm Direction of rotation: clockwise Power consumption: 3.5 kW Dimensions: 4,000 x 3,000 x 3,500 mm Weight: 2,500 kg Rotary labeling machine | NEWTEC | LEOPARD HM 720 F6 S1E1 | 2011 Output: 3,000 bottles/hour Dimensions: 2,750 x 1,700 x 1,780 mm Weight: 3,500 kg Pallet wrapper (semi-automatic) | ECOPLAT | ECOPLAT BASE | 2011 Capacity: 35 pallets/hour Type: Turntable Control system: PLC Max. Pallet weight: 2,000 kg Semi-automatic Dimensions: 2,439 x 1,500 x 2,580 mm Weight: 1,200 kg   Iaodpfxov E Haio Ab Net

Condition: used, Year of construction: 2000, Overview  This complete PET bottling line was manufactured between 2000 and 2012 by a group of reputable European manufacturers, including SIG Corpoplast, KHS, Sacmi, Kisters, Paxona, and others. The line is suitable for still and carbonated soft drinks and includes a blow moulder, filler, labeller, packer, and various conveyor and inspection systems. The line reaches up to 36,000 bph at 1.5L and is available promptly. All machines are well maintained and include original components and relevant peripheral equipment. Technical data  Capacity: 36,000 bph at 1.5L water 35,000 bph at 1.5L soft drinks (sweet) 32,000 bph at 1.5L soft drinks (light) Formats: 0.5L and 1.5L bottles PCO 28-1881 closure Filling product: Water and carbonated soft drinks (7.5g CO₂) Closure system: Screw caps, fed via chute and tipper (Zalkin + NSM) Packing: Shrink pack: 3x2 bottles (double lane) Pallet type: Euro (1,200 x 800 mm) Düsseldorfer (600 x 800 mm) Electrical specs: 400 V / 50 Hz Control systems: ABB, Siemens Operating direction: Standard Scope of Delivery  Blow moulder: SIG Corpoplast Blomax 24, year 2008 24 stations, heating oven with 20 boxes, ABB control Incl. Preform tipper MD3, preform hopper SBT, elevator HFT, conveyor RGTD, chute ASTK Air conveyor: NTS Mistral, year 2000 Pneumatic adjustable rails, basket cable tray Filler: KHS Innofill EV-VF, year 2000 176 electronic filling valves, valve manifold (APV), air conveyor, infeed worm, clamping star wheel Screw capper (Zalkin, 22 heads), cap feeding (NSM), foam cleaning (ECOLAB, 2001), dosing units (2011) Mixer / Deaeration: KHS Innopro DX65 Contimix 65/5-T20, year 2000  65,000 l/h, 5 components, Brix meter (Anton Paar), Hilge pumps Labeller: Sacmi Opera 300 RF 26T/R S1E1, year 2012 26 plates, hotmelt, wrap-around, reel-fed, parallel infeed, safety lift version Inspection & Coding: Fill level and closure check: KHS Innocheck CUB Vision Circle, year 2013 Bottle laser coding: Videojet with housing Pack inspection: KHS Innocheck CUB, year 2015 Packing machine: Kisters SP060V, year 2000 Shrink-packer 3x2 (double lane), 60 cycles/min, manual lane width, foil only Conveyors & Pack labelling: Bottle conveyor: KHS Innoline BTR, year 2000, plastic chain, dry lubrication Pack conveyor: Paxona + Schaefer, year 2009 Pack labelling: Contact 100, self-adhesive label from reel Iasdpowh U Avsfx Ab Nst

Condition: used, Year of construction: 2001, Overview  This Glass Bottle Bottling Line for Still and Sparkling Water was manufactured on average in 2001 by several European manufacturers, including TMG, Zecchetti, Bardi, Muvitec, Procomac, P.E. Labellers, and others. It is a complete and fully integrated line covering all major production steps such as depalletizing, washing, filling, capping, labeling, case packing, palletizing, and wrapping. The line was regularly maintained, includes newer components, and will be available from July 2025, as it is currently in operation. Technical data  Capacity: up to 12,000 bph Formats: 250 ml, 330 ml, 500 ml, 750 ml, 1000 ml Product: Still and sparkling natural mineral water Neck finish: S294 MCA - 1 Bottle diameters: 170 mm, 205 mm, 218 mm, 259–271 mm, 295 mm Case formats: 250 ml: 24-bottle carton 330 ml: 24-bottle carton 500 ml: 12-bottle carton / 20-bottle plastic 750 ml: 12-bottle carton 1000 ml: 12-bottle carton / 12-bottle plastic Year of Manufacture: various (1991–2016) Scope of Delivery  Depalletizer (TMG VEGA 50, 2001) Uncaser (Zecchetti DE Z 2T, 1993) Bottle washer (Bardi NILO 1 16R, 2001) Filler (Muvitec ECOFILL M24 6 12, 2001; Procomac PR 300232.01, 2001) Carbonator (Muvitec, 2001) Decapper (Grassle REM 20, 1991) Dry air line (Europool TF 03, 2013) Labeling machine (P.E. Labellers MASTER M/S 770/161/8S-SE, 2011) Case former (Siat HM 145, 2001) Case packer (Zacchetti IN Z 2T, 1993) Case sealer (Siat AVV SIAT HM 11-T-Muvitec, 2001) Sealant / hot melt unit (Preo EC5TRA2, 2001) Palletizing robot (ACMI ZX165U, 2002) Stretch wrapper (Robopac TECHNOPLANT 3000PVS, 2016) Silo caps (3 Master ALN600LT, 2001)   Iedpewhvc Rofx Ab Neat

Condition: used, Profiling machine Dreistern with accessories Machine bed features: Production direction: right to left 18 stations, driveable 1 x 9.2 kW DC motor Profiling frames, Type 1: Tool width frame: 135 mm Working spindle diameter: 30 mm Working spindle connection: 20 mm with keyway Fixed lower spindle Axial adjustment Adjustment range lower spindle - upper spindle: 60 - 100 mm Axial distance: 130 mm Profiling frames, Type 2: Tool width frame: 210 mm Working spindle diameter: 30 mm Working spindle connection: 20 mm with keyway Fixed lower spindle Axial adjustment Adjustment range lower spindle - upper spindle: 80 - 130 mm Axial distance: 260 mm Scope of supply: Machine bed Strip welding device Infeed table Iaodjy Sm Sdepfx Ab Net Straightening device DC motor Control system with operating panel Electrical documentation 2 straightening roller holders 3 gearboxes 9 profiling frames, Type 1 8 profiling frames, Type 2 18 universal joints The machine operated flawlessly in the customer's factory until it was dismantled. Strip unwinder and perforating machines are also available from us as used machines. We can support you with the following when reassembling the system: Planning Mechanical overhaul Control system retrofit Painting Safety concept CE documentation

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Profiling line Dreistern P3.100 with mobile cut-off unit and accessories Machine bed features: Production direction: right to left Axle distance: 330 mm 48 stations 44 stations can be driven (44 gearboxes) Quick-change plates Mechanical quick-release clamps Coolant piping 1 x 42 kW Baumüller motor 1 x 15 kW Baumüller motor Profiling frame features: Iasdpoy Sm Eqefx Ab Nst Tool width per frame: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft (6 pieces with adjustable lower shaft) Axial adjustment Adjustment range of lower/upper shaft: 80 - 170 mm Gearbox features: Worm gear ratio 1:21 Lower/upper shaft gear ratio 1:1 Mobile cut-off unit features: Travel distance: 1900 mm Profile rail guidance Ball screw drive Bosch servo motor Valve block with punching unit Folding table length: 3000 mm Emergency stop Scope of delivery: Machine bed with gearbox support Infeed table Measuring wheel unit, pneumatic Straightening device Strip filter unit 800 liters Hydraulic unit for separator 44 gearboxes 44 profiling frames 2 Baumüller DC motors 66 universal joints The system operated flawlessly in production until it was dismantled at the customer's facility. Control system not included. Strip unwinder and perforation unit are also available from us as used machines. The system can also be easily extended with additional stations. We can support you with the following when reassembling the system: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation

Condition: used, sheet thickness steel (max.): 2 mm, total width: 250 mm, Roll Forming Line Dreistern P3.100 with Accessories Machine Bed Features: Production direction: right to left Centre distance between axes: 330 mm 22 stations 18 driven stations (18 gearboxes) Quick-change plates Mechanical quick release clamps Coolant and lubricant piping 2 x 18.5 kW Bosch motors Roll Forming Stands Features: Tool width per stand: 275 mm Working shaft diameter: 50 mm Working shaft connection: 30 mm with keyway Fixed lower shaft Axial adjustment Adjustment range lower shaft to upper shaft (UW-OW): 80 - 170 mm Gearbox Features: Worm gear ratio 1:7.5 Lower shaft to upper shaft ratio (UW-OW): 1:1 Iaedpfxey Sm A Ao Ab Net Scope of Delivery: Machine bed with gearbox carrier Infeed table Measuring wheel unit, pneumatic Special straightening unit 18 gearboxes 18 forming stands 2 Bosch motors 36 drive shafts The machine was running flawlessly in production until it was dismantled at the customer's site. Control system is not included. Decoilers and punching units are also available as used machines. The line can be easily extended with additional stations. We can support you with the reassembly of the line, offering: Planning Mechanical overhaul Control system construction Painting Safety concept CE documentation