Used Mengele Sheet Shears Mengele S8-4000 1998 for sale (11,639)

Condition: good (used), Year of construction: 1995, Sheet width 6040 mm Sheet thickness 4 mm Total power requirement 12 kW Hodpfx Aey Uky Djmgon Machine weight approx. 22 t Additional information - Specification - Back stop - Roll shelf

Condition: good (used), I am offering a swiveling bending machine with a return stop and multiple bending rails for sale. Hjdex Rp T Ijpfx Amgen See photos. Suitable for sheet metal with a thickness of 4 mm, with a bending length of 3000 mm.

Condition: good (used), Year of construction: 1980, Sheet metal shears, tin snips, sheet metal sheet metal shears, crank-operated sheet metal shears, auxiliary sheet metal shears -mechanical guillotine shears -Cutting width: 1130 mm -Max. cutting thickness: 4.0 mm -Features: Back fence, side fence, 3 supports -Drive: 2.2 kW -Protrusion: 115 mm -Installation dimensions: 2620/1685/H1365 mm -Transport dimensions: 1215/1685/H1365 mm Hodpfxoy Tyqvs Amgen -Weight: 1250 kg

Condition: used, Technical details: round bar steel: 32 mm square edge steel: 30 angle steel: 90 x 8 mm flat steel: 100x18 mm Knife length: 220 mm number of cutting strokes max.: max. 30 Hübe/min p.Min. voltage: 220/380-50 V rated current: 15,8/8,55 connected load: 4,8 kW weight of the machine ca.: ca. 1,1 t Dimensions (LxWxH): 0,8 x 1,2 x 1,3 m Hjdpfeu Icghjx Amgsn Capacity: - Steel sheet: 16mm - Flat steel: 100 x 18mm - T profile: at 45°: 65 x 7mm, right angle: 90 x 8mm. Machine is in working condition *

Condition: used, Year of construction: 1965, Technical details: sheet width: 1200 mm plate thickness: 1,0 mm throat of pillar: 1200 mm number of cutting strokes max.: 45 p.Min. throat max.: 300 mm Hodpfx Aju Icppsmgon cutting gap adjustment: nein down holder: 5 Stück back gauge: ca. 500 manuell mm total power requirement: 2,2 kW weight of the machine ca.: 1,6 t dimension machine xH: 1,6 x 1,6 x 1,9 m further features: -with shear angle adjustment -operation via foot switch -voltage 380 V *

Condition: used, Year of construction: 1969, Technical details: sheet width: 2000 mm plate thickness: 1,5 mm distance between columns: 2100 mm table-size: 2150 x 450 mm height over floor: 850 mm knife length: 2100 mm Hodsu Icp Aspfx Amgjn down holder: ja mm back gauge: 460 manuell mm strokes per minute: ca. 50 Hübe/min cutting gap adjustment: ja cutting angle: nein total power requirement: ca. 5,5 kW weight of the machine ca.: ca. 3,0 t transport measurements machine: 2,7 x 1,6 x 1,8 m Further features: - incl. Table extension (L: 1750 x W: 1000 mm) and adjustable limit stop - back gauge with linear scale, operation with hand crank i.D. *

Condition: used, Technical details: sheet width - max.: 200 mm plate thickness: 10 mm Knife length: 175 mm round: Ø 20 mm square: 18 mm Hsdpfx Aju Icqasmgen height over floor: 900 mm machine weight ab.: 200 kg dimension machine xH: 0,73 x 0,66 x 2,3 m dimensions L x W x H: Untergestell/Tisch: 0,73 x 0,66 x 0,60 m MECHANICAL HAND LEVER SHEARS Steel construction welded with angle - with base frame -Hand lever length = 1,300mm, with safety lock *

Condition: used, Year of construction: 2019, Technical details: voltage: U1: 400V V open-circuit voltage: 70 V weight of the machine approx.: 100 / Gerät kg dimensions of machine: ca. 0,85 x 0,37 x 1,25 pro Gerät m 4 Fronius TransPuls welding systems available Can be used for industrial applications, e.g. robots. Areas of application: Welding process “CMT”, for all MIG/MAG welding work mobile, 4 wheels / 2x of which swivel with wire feed type: VR 7000-CMT: Wire feed speed 0.5 - 22 m/min; use of possible wire Ø 0.8 - 1.2 mm Hjdpfx Asu Nwhiemgjn RCU5000i univoSD remote control 1 meter intermediate hose package Trolley Protection class IP 23 AF cooling type Operation via display RCU 5000i i.D. *

Condition: used, Year of construction: 1992, Technical details: Hedpfx Amey A Rnqjgsn sheet width: 3050 mm plate thickness: 8 - 16 mm distance between columns: 4800 mm control for program: CNC back gauge: max. 1000 mm cutting angle: 0,5 -3,0 ° down holder: 18 Stück Total power requirement: 30 kW height over floor: 2550 mm weight of the machine ca.: 14 t dimensions of machine: 4,8 x 2,3 x 2,6 m

Condition: used, Year of construction: 1995, Technical details: sheet width: 3000 mm plate thickness: 12 mm distance between columns: 3500 mm control: Cybelec DNC 10 G back gauge: 1200 motorisch mm cutting angle: 1,2 - 2,73 ° cutting gap adjustment: ja mm cutting capacity : 66.000 daN daN Knife length: 3100 mm down holder: 17 Stück interface: RS232 Table dimensions: 3200 x 600 mm Hsdpfxjvc Amtj Amgen total connected load: 22 kW weight of the machine ca.: 11,0 + (1,0 to Anbauteile+Zubehör) t space requirements approx. LxWxH: ca. 4,5 x 2,6 x 2,1 m transport dimensions LxWxH: ca. 5,0 x 2,25 x 2,2 m The guillotine shear was put into operation for the first time in 1998. The DNC 10 G control unit was specially designed for guillotine shears. It has a numerical axis for controlling the backgauge and automatically calculates and regulates the cutting gap, the cutting angle and the cutting depth, taking into account the material to be cut. (Data from the manufacturer) Table with side stopL:930 x W:105 x H:42 mm 2 table extensions L:1600 x W:100 x 83 mm Angle fence (attached to table extension) Operation via control panel with swivel arm and foot control Equipment: Drain with rollers for clippings 2x protective grid *

Condition: used, Technical details: plate width: 1000 mm plate thickness: 3,0 mm smallest sheet thickness: 0,5 mm distance between columns: 920 mm Number of Straightening rolls: oben 4x unten 4x Stück / pieces roll diameter: ca. 75 mm number of rollers: 2 oben und 2 unten St. weight of the machine ca.: 6,5 t dimensions L x W x H: 3,8 x 2,2 x 2,1 m This is a sheet metal straightening machine with hydraulic feed. Further features: Hodsvgbgajpfx Amgen 4 straightening top rolls Ø 75 x 830 mm, stroke 20 mm, hydraulic 4 straightening bottom rolls Ø 75 x 830 mm, fixed, hydraulic 4 pull-out rollers Ø 110 x 480 mm, 2x top adjustable approx. 20 mm and 2x bottom, hydraulic Roller support Infeed height 1400 mm Hydraulic system equipment Operated externally Recommendation: complete conveyor system (decoiler + loading device + straightener with hydraulic feed) for sale with optional stock no. 0100572. *

Condition: used, Year of construction: 1991, Technical details: operating pressure: 160 bar distance between columns: 2000 mm throat: 1000 mm operating pressure: pneum. min/max 6/8 bar operating pressure: hydr. min/max 160/210 bar voltage: 380/50 V /Hz table surface area: 1900x1000 mm height over floor: 1000 mm tool clamping area: 1600x350 mm quantity of oil : 400 l total power requirement: 25,0 kW weight of the machine ca.: 7,1 t dimensions electric cabinet LxWxH: 1,0x0,3x1,4 m dimension machine xH: ca. L:2,2xB:3,4xH:2,2 m CLIP PUNCHING DEVICE or CUTTING PRESS or CLIP PRESS hydraulic - There are two machines on sale! - type of machine: folded punching device The machine has been used to punch holes in dashboards of cars. (incl. upper and lower tool) On the table are mounted the material intake and the sliding unit for the cut and hole punching. equipment: - light curtain - hydraulic pack - electric cabinet - control panel Hjdju Icxdjpfx Amgon - workpiece counter - manual- and automatic operation possible - emergency stop On sale as is. i.D. *

Condition: used, Year of construction: 1989, Technical details: plate width: 1600 mm plate thickness: 20 mm smallest sheet thickness: 6 mm Number of Straightening rolls: 11 straightening roll diameter: 180 mm straightening feed: 10 m/min connected load: 76 kW total power requirement: 75 kW weight of the machine ca.: 39,2 t Hedpfx Asyvfy Tjmgon

Condition: used, Year of construction: 1993, Technical details: throat: 220 mm Hodpfx Aju Ickyjmgon number of strokes: 24 Hub/min height of stroke: 100 mm Punching capacity: 800 (80 to) kN round bar steel: max. Ø 30 (scheren) mm square edge steel: 28 (scheren) mm angle steel: 90°/45°: 110 x 10 / 65 x 8 (scheren) mm flat steel: 180 x 18 / 350 x 16 (scheren) mm knife length: 360 mm hole diameter: Ø 30 x 20 mm (stanzen) mm plate thickness: max. 13 (ausklinken) mm total power requirement: 5,5 kW weight of the machine ca.: 1,3 t dimension machine xH: 1,3 x 0,7 x 1,85 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Shears: with stop L:280 x W:60 xH:12.5 mm Table size WxD: 280 x 440 mm Working height: 760 mm Punching: Table size W: 280 x D: 280 mm Material support W: 538 mm x D: 328 mm x D: 10 mm Working height: 1120 mm with scraper Notching: Table size W: 450 mm x D: 310 mm x D: 13.5 mm Working height: 1115 mm Hydraulic pressure 260 bar, 50 liters Hand control / foot control *

Condition: used, Year of construction: 2009, Technical details: Hjdpfoyuvciox Amgjn Beam Hour: unbekannt / unknown h laser capacity: 4000 W The TLF4000 resonator was installed in a Trumpf True Laser 2525: Laser power: 4,000 W (4 kW) Wavelength: 10.6 µm Beam mode: TEM01* Pulse frequency (gating): 100 Hz – 10 kHz Gas consumption (laser): CO2: approx. 1 l/h N2: approx. 6 l/h He: approx. 13 l/h Cutting gas O2: approx. 500 – 2,000 l/h Electrical power consumption: approx. 33 – 67 kW Adjustable laser power: programmable in 1% increments Laser type: CO2 laser with closed gas circuit Translated with (free version) *

Condition: used, Year of construction: 1997, Technical details: tube diameter: 4,75 - 8,0 mm wall strength: - mm bending radius min.: unterschiedlich, various, variada mm bending angle max.: 180 ° compressed air: min 4,5 bar Total power requirement: ca. 10 kW Weight approx.: 6,0 t dimension machine xH: 6,3x3,7x2,0 m dimensions electric cabinet: 1,8x0,5x2,7 m dimension control panel: 0,85x0,68x1,65 m fully automatic numeric control for bending of hydraulic supply pipes, car brake pipes various length - various numbers of bending possible (max. 100 bendings per pipe) - 2 independent bending module, every modul has 2 NC axis with functions: " longitudinal process (axis 1 and 3) and " turning of bending head" and bending (axis 2 & 4) - program memory for 250 pipes (lines) - the feeding unit consits of manual a manually filled drum magazine (drum magazine pipe dia.=4,75mm up to dia=8,0mm with 500/1000 pcs) - load swiveling arm - control panel Bundy GHF 60134 accessories: Hodpju Ibukofx Amgjn - div. single and add-on parts *

Condition: used, Year of construction: 1993, Technical details: sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Knife length: 3150 mm down holder: 18 Stück back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Hjdpfx Ameu Icnfogon Continuous run Gap lighting Hydraulic sheet metal lifting device rear light curtain Positionable backgauge *

Condition: used, Technical details: cutting capacity: 1 mm round blank diameter max.: 1000 mm cutting capacity: 1 mm round blank diameter max.: 1000 mm Weight approx.: 0,2 t dimension machine xH: 2,0 x 0,5 x 1,4 m Hedpju Icqysfx Amgon Application: manual cutting of round steel sheet parts upper blade Ø 69mm x 11mm; adjustment vertical 25mm with hand toggle lower blade Ø 74 x 15mm; adjustment NO = fixed Centering fixture with die The material is clamped manually with handle vertival 15mm. Displacement horizontal 500mm manual. *

Condition: used, Year of construction: 2003, Technical details: throat: 625 mm number of strokes: 34 Hub/min Punching capacity: 95 t stroke: 80 mm flat steel: 480 x 15 / 380 x 20 mm U-H profile: 160 x 90 knife length: 483 mm total power requirement: 7,5 kW weight of the machine ca.: 2,7 t dimension machine xH: 1,4 x 0,8 x 1,8 m hydraulische section steel shear shearing station: -shearing max. 380 x 20mm / 480 x 15mm -shear cutting max. 120 x 15mm -holder adjustable in length to 750mm -knife cutting edges = upper knife 2-fold and lower knife 4-fold profile station: processing of round and square profiles; U-profiles; double T-beams and unequal angles -angle shearing max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -Profile cutting max. round steel = Ø 50mm; U-H profile = 160 x 90mm; T-profile = 120 x 12mm. Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Hsdju Icl Rjpfx Amgon Operation by foot switch Some accessories available. *

Condition: used, Year of construction: 2007, Technical details: throat: 640 mm round bar steel: stanzen: Ø 26 x 20 mm Punching capacity: 70 t total power requirement: 5,5 kW weight of the machine ca.: 2,0 t Hedpfx Amju Icmhogen dimension machine xH: 2,0 x 1,0 x 1,8 m hydraulic section steel shearing machine shearing station: -shear max. 300 x 20mm / 375 x 15mm -shear cutting max. 150 x 13mm -holding-down device adjustable in length to 630mm profile station: processing of round and square profiles; U-profiles; double T-beams and non-symmetrical angles Angle/profile cutting -angle steel max. 90° shearing = 150 x 15mm and 45° shearing = 80 x 10mm -U-I profile = 130 x 65mm; T profile = 90 x 12mm -profile cutting max: round steel Ø 45mm and square steel 45mm -knife cutting edges fourfold Punching station: -Punching force 60to -throat 640mm -table WxD = 1000 x 600mm -punching max. Ø x thickness: Ø 26 x 20mm and Ø 57 x 9mm -slot punching D x W x D: 10 x 45 x 90mm -through hole in table Ø 40mm -Equipment: stop bar Al angle 100 x 80 x 1000mm Notching station: -Table W x D 430 x 380mm -notches: material thickness 10mm; width 45mm; depth 60 - 90mm; angle flange 100 x 10mm Punching: -Table 600 x 600mm -throat 625mm -bore max: Ø 57 x 12mm -working stroke 80mm; stroke rate 34 strokes/min; punching pressure 40to -stop angle 200 x 100mm L=600mm Notching station: -Table size 450 x 450mm -notching material thickness 13mm; width 52mm; depth V 90° 70 - 100mm; angle flange 100 x 13mm Please ask for accessories. Operation by foot switch Some accessories available. Please ask. *

Condition: used, Year of construction: 2018, Technical details: lifting capacity: 0,125 t swival range : 180 ° Arm length: 4000 mm arm length:: Säule - Kranhaken: 3850 mm height lower edge cantilever arm: 3000 mm column diameter: Ø 220 mm rotation: 270 ° Dimensions of the crane assembled: LxWxH: 4800 x 1300 x 3250 mm Hodpfxju Utmpj Amgsn Dimensions of filling container: LxWxH: 1100 x 1000 x 740 mm Column height: 3200 mm Heavy-duty operation = manual with swivel stop Hoist: Hans Hebetechnik load capacity 1000kg; lifting height approx. 2400mm; hook Ø 30mm with rope safety device; travel distance hoist 2700mm; control via pendant control The crane can be moved via the filling container. *

Condition: used, Technical details: Hedexcay Hopfx Amgen throat: 510 mm number of strokes: 34 Hub/min height of stroke: 100 mm sheet thickness - max.: 16 mm round bar steel: Ø 60 (scheren) mm square edge steel: 60 (scheren) mm angle steel: 90°: 200x200x18 und 45°: 100x100x13 (scheren) mm flat steel: 750x20 und 400x30 (scheren) mm knife length: 765 mm total power requirement: 15 kW weight of the machine ca.: 5,1 t dimension machine xH: 2,4 x 1,2 x 2,0 m Hydraulic flat, profile and bar steel shears with hole punch, notcher Application: Shearing - notching - punching Punching: -Hold-down device -throat 510mm -Punching force 150t -Hole size max. Ø 40x28mm -Ø max. 165mm -max. punch holder Ø 31mm, currently installed punch Ø 25mm Notching: -max. sheet thickness 16mm -max. angle steel 120mm -Cutting depth x width: 110 x 58mm -Pipe notching device Ø 60mm Accessories: various dies and various punches and small punches (see photo) *

Condition: used, Technical details: Hodpfxoxu Dx Ds Amgon dimension machine xH: 1,8 x 1,1 x 1,0 m

Condition: used, Year of construction: 1999, Technical details: turning diameter over bed: 554 mm turning dia. over face-slide: 370 mm turning length: 1000 mm centre distance: 1100 mm control: Fanuc 210i longitudinal traverse (z-axis): 1000 mm Transversal stroke (x-axis): 290 mm revolution per minute: 16 - 1800 U/min spindle stroke: 178 mm feed:: 10 m/min. spindle passage: 104 mm spindle nose: D1 - 11 tailstock taper ISO: 6 MT spindle drive: 11/7,5 kW Hsdpfx Ajv Azdwjmgjn connection voltage: 380 V electrics - voltage/frequency: 3 Ph / 400 V / 50 Hz V/Hz total power requirement: 11 kW Weight approx.: 4,0 t dimension machine xH: 3,3 x 1,8 x 1,7 m

Condition: used, Technical details: throat: 250 mm number of strokes: 42 Hub/min Hedpfx Amewp Edajgon sheet thickness - max.: 13 mm round bar steel: 36 mm square edge steel: 30 mm angle steel: 100 x 10 bei 90° mm flat steel: 100 x 18 mm U-H profile: NP 10 knife length: 230 mm total power requirement: 2,5 kW weight of the machine ca.: 1,7 t dimension machine xH: 2,1 x 1,0 x 1,6 m Application: Shearing - notching - punching Notching: material thickness = angle 50 x 8mm and rectangle 50 x 50 x 8mm Punching: max. 20 : 15mm, throat 250mm Foot control no longer available on both sides! Accessories various dies and various punches and small punches (see photo) *