Used Mesutronic Metalldetektor Metal Detector for sale (35,365)

Condition: good (used), three-jaw chuck diameter: 380 mm, through hole: 100 mm, Metal cutting Tooling POINTER - 380 SL MACH-ID 2995 Make: POINTER Type: 380 SL Diameter: 380mm Fsdpfx Afezdii Ijuepn 3 Chuck: x Spindle bore:100mm Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: good (used), Year of construction: 2007, Original Heidelberg bending machine, maximum sheet size 102. Fpodpfx Aszg Uvqofuon

Condition: like new (used), Year of construction: 2023, operating hours: 1 h, actuation type: manual, working width: 2,030 mm, back gauge: 750 mm, Equipment: documentation/manual, type plate available, Panel shear, like new, unused. The machine was delivered by Schröder in January 2023 and put into operation. Since it was unsuitable for the intended application (see photos), it was subsequently stored and is in absolutely new condition. The new price was €12,381 (excluding transport + assembly). Manufacturer: SCHRÖDER Type: HS 2000 x 1.25 Year of manufacture: 2023 Usable length: 2,030 mm Cutting capacity at 400 N/mm2: 1.25 mm Equipment: - Rear stop 750 mm, digital display, adjustable at the front - Hold-down device 750 mm Fpsdozl A Raspfx Afuon - Stainless steel blade - Clamping beam with hard rubber strip - Front support table, extendable - Angle stop right + left - Sliding carriage

Condition: good (used), You are bidding on: a branded device – a press brake, from a very good and well-known manufacturer – Schechtl. Features of the device: Press brake Schechtl MA 200 / 6 The bending beam bends cleanly – testing is possible. Angle adjustment for up to 6 bending steps (if only 2-3 or, for example, 4 are needed, simply set it to the desired number). Ideal for series bending. The machine was used by a carpenter. Bending length slightly over 2m. Sheet thickness: 2 mm iron – sheet – aluminum, zinc, etc., up to approx. 3 mm. Standard bending beam – radius for aluminum, zinc would also be available as an option, as would an extension and special bending beam! Foot pedal for operation. Optional depth stop. Sheet metal shear HT 200, or MT (see picture) – or sheet metal shear Schröder electric 2m – 2.5mm would be optional, but not included in the price – the offer can be adjusted. Important! You can optionally find and purchase many machines and machine accessories, such as various bending beams, depth stops – everything related to sheet metal and steel processing, such as press brakes, sheet metal shears, drilling machines, circular machines, slitting and profiling machines – accessories (beading device, round rollers for gutter production, back gauge, etc.), as well as other hand tools and spare parts from many top manufacturers in our shop. I am always available to answer your questions. You will receive an invoice according to § 25 a UStG; the VAT is included in the invoice amount. Differential taxation. Free loading is possible – weight approx. 1700 kg. Fpedpfjzzff Sox Afuon Inspection and testing are possible and desirable after arranging an appointment by telephone. Payment in cash upon collection. Take advantage of our experience and expertise; we will be happy to advise you. Collection by the buyer himself (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction. Location: 97249 Eisingen, approx. 3 minutes from the A3 and A81 motorways. Article number: Press brake MA 200 / 6

Condition: new, Year of construction: 2026, CIDAN F folding machine is fast, user-friendly and reliable. The new construction is robust with welded sides, extra strong lower beam and clamping beam. The generous 150 mm opening height and the generous beam openings allow greater flexibility. The folding beam comes in three different widths, offering the best result for any profile and material, with keyholes for fast changes. The strong but compact folding beam makes the operator’s work easy and the entire process is speeded up as the clamping beam opens before the folding beam is back in place. Choose a CIDAN F folding machine and you choose work of joy and productivity in a perfect combination. Fodpem Tv D Uofx Afuspn - Fast, user-friendly and reliable. - Adjustable crowning for perfect folding results regardless of length and material thickness. - Two folding beam rails as standard, 7/10 mm and 15 mm. - 8–16 gauging rails depending on back gauge type and working length. Click here to read more about our back gauges. - Choose between three different control systems: EasyLink, nuLINK or ProLink W.

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2024, Demonstration Machine Cidan MF - Manual Folding Machine The new CIDAN MF is a user-friendly manual folding machine with a compact size and low weight. This allows you to take this practical assistant anywhere and bend sheet metal directly in your construction vehicle or on site quickly and effortlessly. This machine meets the same high standards as our quality machines, which we have been manufacturing for our customers in this industry for over a hundred years. The manual folding machine is extremely robust and designed for long-lasting use. Thanks to its intuitive operation, this machine is immediately ready for use and delivers precise results. It enables efficient work, regardless of location or the operator’s experience. You can work efficiently and reliably without losing time on extensive training or setup adjustments. Manufacturer: CIDAN Working length: 2040 mm Steel* (400 N/mm2): 0.6 mm Stainless steel* (600 N/mm2): 0.5 mm Aluminium* (200 N/mm2): 1.0 mm Fpsdsx Ngf Sepfx Afujn Weight: 140 kg For more information: cidanmachinery.com

Condition: used, Year of construction: 2000, machine/vehicle number: 121528, Item No. 26301 Technical specifications: - Saw blade diameter up to 400 mm - Cutting range with a saw blade diameter of 400 mm - at 90° up to round 130 mm - square 120 mm - flat 305 x 40 mm - or 240 x 85 mm - mitre adjustable, left + right 0 - 90° - at 45° up to round 130 mm - flat 245 x 30 mm - or 180 x 70 mm - Saw blade feed speed - steplessly adjustable 0 - 10 m/min - Saw blade cutting speed 13 / 26 m/min - Saw drive 400 V / 1.7 / 2.6 kW - Hydraulic drive 400 V / 0.75 kW - Hydraulic material clamping device with hand crank for fine adjustment - Steplessly adjustable clamping pressure - 2 hydraulic backstops - Micro-spray coolant system - Original outfeed roller conveyor with stop 4000 mm - Infeed roller conveyor 2000 mm - Space requirement approx. W 900 x H 1800 x D 1050 mm Fpsdpfx Aezzplisfuen - Weight approx. 950 kg

Condition: used, Year of construction: 2009, machine/vehicle number: 10000850, Item No. 21166 Hydro-pneumatic metal circular sawing machine Technical data: - Saw blade diameter up to 350 mm - Saw blade feed, continuously adjustable, hydro-pneumatic - Maximum opening width of the pneumatic vise 205 mm - Cutting range: - with saw blade diameter 350 mm - at 90°: - round 120 mm - square 110 mm - flat up to 200 x 90 mm - or 140 x 110 mm - at 45°: - round 100 mm - flat 100 x 100 mm - Miter adjustable: - left up to 45° - right up to 45° - 30° - 4 saw blade speeds 10 + 20 + 40 + 80 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro-spray cooling system Fpedpfx Afszzpp Ieuen - Discharge conveyor with stop 4000 mm - Infeed conveyor 2000 mm - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: TEL-178600-558-98, working width: 1,250 mm, The production line was fully operational until it was dismantled. It was taken out of service solely due to a production upgrade/change in manufacturing technology. The machine is currently dismantled and prepared for transport; therefore, a live demonstration is not possible. Prior to dismantling, the line operated without any issues and was regularly maintained. We offer two complete roll forming lines for sale, available either individually or as a package. Manufacturer: SAMESOR Year of manufacture: 1998 Fpodpfjzmzhmex Afuon SERIAL: TEL-178600-558-98 Manufacturer: AJV-MACHINE Year of manufacture: 2006 SERIAL: AJV24/1100-169

Condition: new, Year of construction: 2025, functionality: fully functional, Specialised press built from the ground up for briquetting of iron, steel and similar alloys. Includes integrated oil collection pads. Does not include packing table – only briquette guides (slides). Comes with see through bunker doors & oil heating elements as standard. Machines are controlled by Siemens KTP-400 touchscreens. 2nd generation available for purchase from February 2024. For this press please first contact us! Technical Data : Throughput: Up to 600 briq/h* Main motor: 30kW Infeed motors: 2.6kW Fsdpfx Afstmugceuopn Cooling system: 1.6kW Total power: 34.2kW Oil tank: 260l Filters: 4 Length: 2000mm Width: 2000mm Height: 2200mm Weight: 3500kg Briquette size: 40-110, D80mm Warranty: 2 years / 2 000 workhours

Condition: new, Year of construction: 2025, Metal Detector for food and other (e.g. medical, chemical, textile) products, stainless steel framework, touch screen, self-learning system. - Specifications: weight of the product: max. 5kg; detecting speed: 0.2-0.8m/sec; detecting accuracy: FE from Ø 1.0mm, SUS from Ø 2.2mm; tunnel size WxH: 350x175mm; max. passing size WxH: 300x135mm; power: 220V/0.3kW, 50Hz/60Hz, dimensions and weight: L1545xW1114xH1383mm, 150/250kg. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Fodpfov Nm E Tex Afujpn

Condition: new, Year of construction: 2025, Metal Detector for food and other (e.g. medical, chemical, textile) products, also suitable for wet products, stainless steel framework, touch screen, easy integration into existing production line. - Specifications: weight of the product: max. 50kg; detecting speed: 0.5m/sec; detecting accuracy: FE from Ø 1.5mm, SUS from Ø 2.5mm; tunnel size WxH: 450x250mm; max. passing size WxH: 410x210mm; power: 220V/0.45kW, 50Hz/60Hz; dimensions and weight: L1800xW800xH950mm, 180/280kg. Fpjdjv Nm Hkopfx Afusn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Combination of Metal Detector and Weigh Checker. With two recect devices to check if product metallic impurities and/or meets target weight. - Specifications: stainless steel framework, weight range: 5-990g; detecting speed 0.2-0.75m/sec; detecting accuracy: FE from Ø 1.0mm, SUS from Ø 2.0mm; target weight accuracy: ± 0.5g; tunnel size WxH: 330x150mm; max. passing size WxH: 280x110mm; power: 220V/0.35kW, 50Hz/60Hz; dimensions and weight: L1700xW600xH900mm, 160/260kg. Fedpfx Afsv Nm Hwsuspn Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: good (used), Sheet metal clamp, sheet metal claw, beam clamp, beam claw, sheet metal gripper, material gripper, material gripper -Sheet metal claws -Span: 0 to 38 mm -Load capacity: 2500 kg -Number: 3x terminals available Fpjdpfx Afodg Sngjuen -Price: per piece -Weight: 15 kg

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, sheet thickness (max.): 3 mm, working length: 2,500 mm, TECHNICAL DETAILS Sheet thickness with tensile strength of 410 N/mm² max.: 2.00 mm Sheet thickness with tensile strength of 600 N/mm² max.: 1.25 mm Sheet thickness with tensile strength of 265 N/mm² max.: 3.00 mm Minimum sheet thickness: 0.50 mm Length of the notched plate at the inlet max.: 2,700 mm Width of the notched plate at the inlet max.: 1,500 mm Rotatable diagonal of the notched plate max.: 2,700 mm Bending length max.: 2,500 mm Clearance for bending above the work table max.: 127 mm MACHINE DETAILS Fpsdozv Rc Sepfx Afujn Processor: Intel Pentium III, 500 MHz RAM: 128 MB SDRAM Graphics memory: 4 MB SGRAM Hard disk capacity: 9.1 GB CD-ROM drive: 600 MB Floppy disk drive: 3.5 inch, 1.44 MB Network cards: 2 Screen diagonal: 17 inches Voltage: 400 V Frequency: 50 Hz Number of phases: 3 Rated power: 38 kW Rated current: 64 A Switching capacity of the main switch: 40 kA Further technical details can be found in the attached documents.

Condition: good (used), functionality: fully functional, saw blade diameter: 350 mm, Saw motor: 1.5 / 1.8 kW Fjdpfx Afozzvwreuepn Saw blade size: 350 mm 2 saw blade speeds: 1400 / 2800 rpm Miter angle stepless: ±45°

Condition: good (used), functionality: fully functional, Year of construction: 1994, Hydraulic Swivel Bending Machine Manufacturer: FASTI, Type: 212 – 20 – 6 Year of Manufacture: December 1993 / January 1994 Technical Data Manufacturer: Fasti Fsdpfx Aez Aqx Tofujpn Type: 212-20-6 Year of Manufacture: December 1993 / January 1994 Useful length: 2040 mm Sheet thickness: 6 mm Stroke: 500 mm Connected power: 12.42 kW Voltage: 400 V Number of phases: 3 Control voltage: 230 V AC // 24 V DC Rated current: 16.5 A Mains frequency [Hz]: 50 Installation dimensions: L 3.30 x W 2.80 x H 2.30 m Weight: approx. 6 t Equipment - Bending angle adjustment using a potentiometer and digital display - Sheet thickness adjustment (bending flange) using a push button and digital display - Controlled rear stop, 1000 mm with ball bearings, extendable to 1500 mm - 2 x sharp edge rails, 45° - 1 x sharp edge rail, 30° - Bending rails 16, 35, 10, 12, 15 mm - Gooseneck rail H 130 mm, segmented All information is without guarantee. The machine is characterized above all by its very simple operation. A demonstration is possible at any time in our showroom.

Condition: excellent (used), overall weight: 32 kg, total height: 125 mm, total length: 430 mm, total width: 130 mm, Metal cutting Tooling HILMA - TYP 125 MACH-ID 9714 Make: HILMA Type: TYP 125 Fodpjz Arhiofx Afuepn Length:430mm Width:130mm Height:125mm Weight:32kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, Year of construction: 2025, All-round fiber laser metal tube cutting machine Multiple function options help the laser tube cutting machine be used in numerous tube cutting processes. The slender nozzle allows the laser tuber cutter to avoid interference and cut various types of tubes, including special-shaped tubes like H-Beam, P-Beam, I-beam, etc. Cutting machine clamping becomes convenient, easy and fast, with 3 seconds at the soonest to clamp and high repeat precision Cutting performance and efficiency are improved by maintaining gas flow steady with little turbulence. BodorGenius, combined with the lightning-quick piercing process, completes the whole piercing during it moves down on Z-axis. Thanks to the technology, no reworking is necessary for medium and thick sheet piercing. Angle steel and channel steel cutting are standard with no need for additional installation. Optimized edge searching method and algorithm guarantee higher cutting precision and better steadiness of the laser cutter. Condition: New Laser Type: Fiber Laser Laser Power: 1500W, 2000W, 3000W, 6000W Fpjdpfehwrk Tex Afuen Maximum machinable tube length: 6500mm/9200mm Chuck drive types: NC electric chuck Graphic Format Supported: AI, BMP, Dst, Dwg, DXF, DXP, LAS, PLT CNC or Not: Yes Cooling Mode: WATER COOLING

Year of construction: 2026, condition: as good as new (ex-display), Spray Cleaning System - Parts Washing System - NEW SYSTEM / Pilot Plant Basket dimensions (octagonal): 1,287 mm Basket diagonal: 1,393 mm Useful height: 900 mm Max. loading weight: 600 kg Tank volume: 500 liters, spray pressure: 5 bar, 400 l/min. Heatable up to 90°C System made entirely of stainless steel 1.4301 (AISI 304) and dip-pickled Including loading trolley in front of the system Included special equipment: - Steam extraction including condensate return - Automatic Water refill and level monitoring - Removable coarse filter in the return line to the wash tank - Removable basket surround Fsdowitvqspfx Afuspn - Preparation for retrofitting an oil separator - Weekly timer for heating - Electric spray pipe for optimized component cleaning - Inspection hatch in the tank area - Siemens S7 1200 control system with color touch panel, manufactured by Weintek Upon request, commissioning can be carried out by qualified personnel for an additional charge.

Condition: good (used), Metal band saw, band saw machine, band saw, vertical band saw, horizontal band saw, hydraulic horizontal band saw machine -Manufacturer: Ferm, Metal band saw -Type: BZ-175 -Drive: 0.75 kW -Cutting capacity 90°: Round 180mm, Rectangle 260x180mm -Cutting capacity 45°: Round 115mm, Rectangle 115x180mm -Saw band speed: 70/110/150/195 m/min -Saw blade: 2360 mm -Transport dimensions: 460/1230/H990 mm -Weight: 140 kg Fpodozzmh Ispfx Afujn

Condition: new, Year of construction: 2026, -TFON Precision Edge Rounding & Finishing System. Designed for superior surface finishing and edge rounding across a wide range of materials and industries, the TFON system combines advanced automation with versatile configurations to meet your exact production needs. Fjdpjhq Dbmefx Afuspn -Material Compatibility: Suitable for aluminium, stainless steel, and mild steel applications. -Wide Thickness Range: Efficiently processes materials from 0 to 120 mm thick -Finishing Excellence: Engineered to deliver high-quality surface finishes that enhance product aesthetics and functionality. Industrial Versatility: Ideal for medical devices, commercial kitchen equipment, automotive parts, and metal accessories industries. Edge Rounding Precision: Provides precise Radius 2 edge rounding, improving safety and enhancing the final product appearance Advanced Automation: Integrated Siemens control system ensures enhanced precision and operational reliability Independent Processing Stations: Enable flexible, efficient multi-stage processing tailored to complex workflows. Multiple Table Width Options: Available with table widths of 650 mm, 1000 mm, or 1300 mm to accommodate diverse production requirements. Customisable Conveyor Options: Choose from vacuum, semi-magnetic, or semi-vacuum conveyor systems for safe and secure part handling. Surface Cleaning: Effectively removes rust, oxides, and surface contaminants to prepare parts for downstream processing. Improved Operator Safety: Edge rounding station minimizes risks of cuts and injuries from sharp edges. High-Performance Finishing: Equipped with Scotch abrasive technology to deliver smooth, even finishes. Extended Abrasive Life: Pneumatic oscillation system maximizes abrasive band and Scotch abrasive longevity, reducing downtime. Consistent Radius Output: Six flap wheels ensure uniform edge radii on every part for consistent quality. Engineered for performance. Designed for safety. Built for industrial versatility. TFON – Surface perfection, every time

Condition: new, Year of construction: 2026, -TFON Leveltech® Leveling Machine Series Models: S-3560, S-3511, S-3513, S-3516 -Designed for precision leveling of thin materials, these machines feature advanced electromechanical controls and user-friendly touchscreen interfaces for efficient operation. -Material Thickness: 0.3 mm – 5.0 mm. Maximum Material Width. -S-3560: 600 mm -S-3511: 1.100 mm. S-3513: 1,300 mm S-3516: (width not specified) Minimum Material Length: 70 mm. Flattening Gap Adjustment: Electromechanical / PLC Controlled Overload Protection: Standard. Control Screen: Touchscreen Machine Weight: Fodpfx Afshwb Uteujpn S-3560: 5.000 kg S-3511: 10.000 kg S-3513: 14.000 kg Machine Dimensions (L × W × H): S-3560: 1,985 × 1,585 × 1,820 mm S-3511: 2,485 × 1,585 × 1,820 mm S-3513: 2,695 × 1,585 × 1,820 mm.

Condition: new, Year of construction: 2026, -TFON Leveltech® Leveling Machine Series -Model: L-9060 -Material Thickness: 1.0 mm – 30.0 mm. -Maximum Material Width: 600 mm. -Minimum Material Length: 145 mm -Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Weight: 26.000 kg. Machine Dimensions (L × W × H): 4,400 × 7,185 × 2,260 mm. Model: L-9011 Material Thickness: 1.0 mm – 30.0 mm Maximum Material Width: 1,100 mm. Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Machine Weight: 31.000 kg Machine Dimensions (L × W × H): 4,600 × 7,185 × 2,260 mm Model: L-9013 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,300 mm Minimum Material Length: 145 mm. Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled Overload Protection: Standard Machine Weight: 35,000 kg Machine Dimensions (L × W × H): 5,000 × 7,185 × 2,260 mm Model: L-9016 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 1,500 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard Fjdjhwb U Topfx Afuopn Machine Weight: 40.000 kg Machine Dimensions (L × W × H): 5,200 × 7,185 × 2,260 mm Model: L-9020 Material Thickness: 1.0 mm –30.0 mm Maximum Material Width: 2,000 mm Minimum Material Length: 145 mm Flattening Gap Adjustment: Servo Hydraulic / PLC Controlled. Overload Protection: Standard. Machine Dimensions (L × W × H): 5,700 × 7,185 × 2,260 mm

Condition: new, Year of construction: 2026, -Tfon Leveltech® S-3513 Leveling Machine. Fpjdpfx Afskyrzlsusn -The Tfon Leveltech® S-3513 is a precision leveling machine optimized for ultra-thin materials, combining advanced electromechanical controls with easy operation for consistent, high-quality flattening results. -Key Specifications: Material Thickness: 0 – 0.3 mm. -Maximum Material Width: 1.300 mm Minimum Material Length: 70 mm Quick Change System for Straightening Rollers: Standard. Flattening Gap Adjustment: Electromechanical / PC Controlled. Machine Dimensions (L × W × H): 2,685 × 1,585 × 1,820 mm. Total Weight: 5.000 kg.